MESA® Sole Series Enclosures nDoor mounted heat exchanger for thermal control The MESA® Sole Series offers thermal management, battery backup and room for wireless carrier equipment to meet your small cell application needs. nExternal AC power box with a 2-position load center Description Key Features nOptional vented base chamber for batteries nOptional right side-mounted customer access module nDesigned to meet GR-63-CORE (NEBs), GR-1089-CORE (EMC) and NEC safety requirements nDesigned to meet Telcordia’s GR-487-CORE, Issue 2 requirements The MESA® Sole Series is a compact and flexible enclosure solution for housing electronics, distribution, and battery backup equipment in outdoor telecom networks. To provide maximum protection for your equipment investment, the MESA® Sole is designed and tested to withstand the most severe environmental conditions. Efficient thermal management is achieved through use of a heat exchanger cooling system which keeps electronics from exceeding their optimal temperatures, yet never introduces outside air and pollutants into the equipment chamber. The MESA® Sole cabinet is extremely flexible, and a modular approach is taken wherever possible so the cabinet can be quickly configured to meet your exact requirements. Application This cabinet can economically house a variety of next generation electronic equipment including telco backhaul, fiber distribution, and radio equipment for wireless applications. Dimensions 8.53 33.02 48.00 14.98 28.00 18.00 123000D-MESAsole / 0614 1 MESA® Sole Series Enclosures Technical Specifications Dimensions (continued) Enclosure Cabinet Access Aerial View Security Environmentally sealed door to access the equipment chamber (2) 1/4 turn fasteners secure door; padlock can be installed on lower fastener Mounting Mounting Options Pad, pole, wall or H-Frame 63.5 cm (25") of unobstructed vertical mounting space. Vertical Rack Space Total space is 71 cm (28") Equipped with 58 cm (23") steel equipment rails bonded Racks by contact to master ground bar Accepts standard 30 cm (12") deep, center mount equipment Center Mounting [13 cm (5") front, 18 cm (7") rear] Thermal Protection Heat Exchanger 43.13 5.13 18.10 9.38 27.48 Equipped with door mounted heat exchanger, capable of removing 650 Watts of heat at 46 °C ambient / 65 °C return (114.8 °F ambient / 149°F return) Equipment Chamber Via (1) 10 cm (4") inside diameter cable cone, (1) 2.5 cm (1") Cable Entry grommeted opening, and (1) 2 cm (.75") opening Equipped with an external 2-position load center to AC Power Box accommodate customer-supplied AC power AC Convenience Ground Fault Circuit Interrupter (GFCI) protected 15 A outlet Outlet in equipment chamber Equipment chamber contains (2) 6-position, Grounding 2-hole ground bars; one is isolated from frame Optional Battery Compartment Ventilated external battery base compartment equipped Battery Options with battery heater pad Optional Customer Access Module Mounting Mounts on right side of cabinet Grounding 10-position ground bar Environmental Sealed from outside environment by right-hand hinged door Security (2) 1/4 turn fasteners open using 216 hex tool EmersonNetworkPower.com/EnergySystems (North America) EmersonNetworkPower.eu/EnergySystems (EMEA) 47.02 Ordering Information Emerson Dimensions Approx. Part No. Description (H x W x D) Weight Enclosures F1009260 MESA® Sole backhaul cabinet 121.9 x 109.2 x 67.3 cm 96.6 kg with customer access module (48" x 43" x 26.5") (213 lb.) and battery base 83.8 x 109.2 x 67.3 cm 74.8 kg F1009261 MESA® Sole backhaul cabinet with customer access module (33" x 43" x 26.5") (165 lb.) (no battery base) 121.9 x 83.8 x 67.3 cm 86.1 kg F1009262 MESA® Sole backhaul cabinet with battery base (48" x 33" x 26.5") (190 lb.) (no customer access module) 83.8 x 83.8 x 67.3 cm 64.4 kg F1009263 MESA® Sole backhaul cabinet (no customer access module (33" x 33" x 26.5") (142 lb.) or battery base) Accessories F1009264 MESA® Sole pole mount kit F1009265 MESA® Sole wall mount kit F1009266 MESA® Sole pad mount kit (only for cabinets with battery base: F1009260 and F1009262) F1009604 MESA® Sole H-frame kit F1010043 MESA® Sole mounting plinth/platform (only for cabinets without battery base: F1009261 & F1009263) F1009300 MESA® Sole battery bracket kit for SBS batteries F1009351 MESA® Sole mounting bracket kit for 100-pr. protection panel in customer access module F1009656 MESA® Sole conduit template for customer access module F1006640 100-pr. protection panel © Emerson Network Power, Energy Systems, North America, Inc. 2014. Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson™ and Consider it Solved are service marks and trademarks of Emerson Electric Co. EnergyMaster ™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure™ and NetXtend™ are trademarks of Emerson Network Power, Energy Systems, North America, Inc. Any other product, brand, or company names or logos are the property of the respective owner. 2 38.00 While every precaution has been taken to ensure accuracy and completeness herein, Emerson Electric Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice. 123000D-MESAsole / 0614
© Copyright 2024