Specification Summary UJ 440E General information UJ440E Comfort type; feed arrangement consists of feeder with grizzly and screen deck below grizzly, by-pass chute and optional NF conveyor. SANDVIK UJ440E •The feed hopper is removable in order to reduce unit transportation weight. 08-02 •A by-pass chute directs undersize material from the grizzly to the discharge conveyor. •Sandvik discharge conveyor with belt scraper, steering rolls and impact bars under the crusher. Extra high discharge for superior stock pile mass. •Rock box below the crusher for protection of the conveyor. •A level monitoring system above the crusher regulates the feeder speed. •Sandvik rubber in feeder pan, absorbing impact and noise. •Hydraulic CSS-regulation with wedges. •Wide range of jaw plates for different applications are available. •Platforms on top of crusher and around generator set provide access for inspection and maintenance. •Four 24V flood lights are fitted on mast for illumination at night. •Flash lights and a siren provide visual and aural warning of movement and stand-by. •Electrically driven pump with automatic shut-off for refilling of diesel. •Main power is 400V AC, Control voltage is 230V AC and 24V DC •There are 2ea 10A/ 230V power outlets and 1ea 3-phase 25A/ 400V power outlet. •Prepared for electrical connection to the main supply. •The UJ440E is maneuvered by radio remote control (option) and has a cord connected remote control as a back-up. Emergency stop buttons are provided at appropriate places. •Emergency stop buttons are provided at appropriate places •The design and manufacture of the UJ440E complies with ISO 9001 and all the directives required for CE marking. The diesel engine complies with EU and US Emission regulation norms. Specification Summary Dimension Operation Height Width Length Weight1 part no.1 tons short tons 1 excluding Transport 3,9m/12’10” 3,3m/11’ 20,2m/66’3” 4,7m / 15’5” 3.5m / 11’6” 20,4m / 71’2” part no.2 67 73,5 3 3,5 options Feed station Feeder type Grizzly length Hopper SW1253H 1.2m / 4’ 10 m3 / 353 ft3 Crusher Type Feed opening Drive CJ412 1200x 800mm / 48” x 31½” From electric motor. 132kW, 50 Hz, squirrel cage type. Discharge conveyor Belt width Length Drive Approx. Discharge height under drum 1400mm / 52” 17,0m / 55’9” 2x 11,0 kW electrical motors 4.0m / 13’4” Options On-board power pack SANDVIK UJ440E CM1 CM4 CM5A CM6 CM7 08-02 08-01 Overband magnet. Dust filter. NF conveyor incl. Support (8,0m x 500mm) Automatic lubrication system for the jaw crusher. Hydraulic hammer set. Complete Rammer system BR927 City and BB285 incl. hydraulics and brackets. CM8 Water spray system (spray nozzles both on crusher and discharge conveyor). CM10 Belt scale on discharge conveyor. CM11 Radio remote control. CM14 Flood lights pointed at the crawlers. CM16 Extra power outlet (63A) for external screening station. CM18 Diesel driven heater for the engine. CM29A Complete oil filter set 80 hours service CM20 Adaptation Mines and quarries for UK. CM32 Removable side wall extensions for the feed hopper. Total volume 20m3 / 705 cu. ft Diesel generator Rated output Volvo 1241 TAD 375 kVA Fuel tank volume Main Voltage Control Voltage Generator 2400 dm3 / 635 US gallons 400 V/50 Hz/3-phase a.c. 230 V/50 HZ/1-phase a.c. Stamford Hydraulic system System 24V –400V for crawlers, crusher CSS and hydraulic legs. Crawler tracks CAT 330 Track shoe width 500mm / 20” Performance Max.feed size Capacity (up to) Traveling speed Max.slope-climbing capability 760mm / 30” 600mtph 25m/min Approx. 20°
© Copyright 2024