® DSEGenset DSE2548 DSENET OUTPUT EXPANSION MODULE ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ® ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment The DSE2548 is an LED expansion module that can be used with all DSENet® compatible control modules. The module has been designed to display a maximum of eight individual LED indications up to a maximum distance of 1 KM (0.6miles). The DSE2548 includes individual LEDs for each channel and a ‘Power On’ LED that flashes when the link with the host controller is lost. TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 oC BS EN 60068-2-2 Bb/Be Dry Heat +70 oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn The DSE2548 is presented in a vertical enclosure. It includes an alarm sounder that is triggered when the host controller detects an alarm condition. The alarm can be muted directly from the DSE2548 using the front push button. HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 oC @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 oC @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP65 - Front of module when installed into the control panel with the supplied sealing gasket. COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET APPLICATIONS HOST MODULE (1) 1 DSENET® EXPANSION DC POWER SUPPLY 8-35V COMPATIBLE WITH DSE7310/20, DSE8610/60/80 & DSE8710/60 DSE2548 DSENET® HOST MODULE 7 2157 2130 2510/20 2548 OTHER CONFIGURABLE LEDS AUDIBLE ALARM 8 ISSUE 3 ® DSEGenset DSE2548 DSENET OUTPUT EXPANSION MODULE ® SPECIFICATION DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 112 mA at 12 V, 53 mA at 24 V MAXIMUM STANDBY CURRENT 74 mA at 12 V, 35 mA at 24 V DIMENSIONS OVERALL 180 mm x 116 mm x 42.7 mm 7.07” x 4.57” x 1.68” PANEL CUT-OUT 154 mm x 98 mm 6.06” x 3.86” MAXIMUM PANEL THICKNESS 8 mm 0.3” KEY FEATURES • Eight configurable LEDs • Works up to 1 KM (0.6 miles) from the host controller • 10 modules can be linked together to one host controller ID SWITCH The rotary ID switch is used to select the address of the DSE2548 expansion module, as the host control module is capable of giving instructions to a number of DSE2548 expansion modules at the same time. RELATED MATERIALS TITLE DSE2548 Installation Instructions DSE2548 Operator Manual PART NO’S 053-032 057-084 DEEP SEA ELECTRONICS PLC UK Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com DEEP SEA ELECTRONICS INC USA 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457 055-062/10/10 (3)
© Copyright 2024