PROTECTA PROTECTA ExExe eLED LEDLINEAR LINEAR FLUORESCENT FLUORESCENTREPLACEMENT REPLACEMENT The Protecta III has now been redesigned to accept LEDs, bringing forward benefits such as the extended life and low maintenance features which are key to the oil and gas industry. Expected useful life to 70% of the initial lumens is 110,000 hours, but even when this is achieved the geartray which the LEDs are mounted on can be replaced, similar to a traditional lamp change. The LEDs are more powerful in lumens per watt figures than all fluorescent tubes, proving that LED technology is now truly a viable alternative. One of the main benefits of LEDs is their ability to maintain a steady lumen output across the complete ambient temperature range and at low temperatures they greatly out perform fluorescent lamps. The complete geartray assembly which includes the LEDs and driver can be retro-fitted into existing Protecta III fluorescent product - bringing the existing enclosure up to date with the very latest technology. The proven track record of the very robust enclosure is not compromised as the complete enclosure remains unchanged. Standard Specification Type of Protection Ex e mb q (Increased Safety, Encapsulation, Powder Filling) ATEX Classification Group II Category 2 GD Area Classification Zone 1 & 21 areas to IEC 60079-10 and IEC 50281-3 with installation to IEC 60079-14 and IEC 50281-1-2 Certificate EC Type Examination Certificate Baseefa04ATEX0220 IECEx Certificate of Conformity IECEx BAS 09.0017 Features Simple rugged construction Long life LEDs Retrofit geartray available Contact Sales for further information Full length easy access diffuser clamp Coding Enclosure Reflector/Geartray Entry Termination Installation Control Gear Relamping Light Source Ingress Protection Electrical Supply Battery Duration TBC GRP body with polycarbonate cover Aluminium 4 x M20 cable entries - 2 at each end 3 core 4mm² max. conductor with looping and 16A rating through wiring Two M8 tapped inserts located on the rear of the body Electronic Driver Quick release diffuser clamp and hinged cover Light Emitting Diode (LED) strips Ex mb component certified (IECEx DEK 13.0025U) IP66/67 to EN 60529 220-254V, 50/60Hz Internal Ni-Cd (6V) (Emergency version only) 90 mins (Emergency version only) Hinged cover Standard fixing centres Screwless mains terminals DTS-01 deluge tested LED Colour Temperature 4000K (CCT) 110,000 maintenance free hours @ +25°C 70% initial lumens ATEXCATEGORY CATEGORY2 2 ATEX Std. Cat No. ZONE1 &1 &2121APPLICATIONS APPLICATIONS ZONE Power Consumption Delivered Output Ambient °C Weight PRGE/02L/LE 30W 2178 lm -40 to +55 5.9kg PRGE/05L/LE 60W 4607 lm -40 to +55 11.5kg PRGE/02L/LE/EM 30W 2178 lm -25 to +55 8.9kg PRGE/05L/LE/EM 60W 4607 lm -25 to +55 13.0kg Options - Suffix to to Catalogue No.No. Options - Suffix Catalogue /M25 M25 entries /LT Low temperature to -40°C (Emergency) /LBE Looping both sides /SC /EL Extra live termination facility (to match emergency circuit) Screwed connection terminal block (up to 6mm² conductors) /3H /120 3 hour battery duration Specific voltage (110/130) Applications Zone 1 and 2 hazardous areas • Offshore oil and gas platforms • Cold rooms • Chemical industry Pharmaceutical industry • Sewage treatment plants • Process areas • FPSO’s and FSO’s vessels Walkways • M.O.D. installations • Distilleries • Gas pumping stations 02L Accessories 05L Should be ordered separately Catalogue Order Code Pole mounting bracket assembly (38/42 diameter poles) SPOL4-100001 Pole mounting bracket assembly (48/52 diameter poles) SPOL4-100002 Pole mounting bracket assembly (58/62 diameter poles) SPOL4-100003 Hook type ceiling bracket assembly SPRO4-0005 Flush mounted wall bracket assembly SPRO4-0006 Ceiling bracket assembly SPRO4-0002 Wall mounting outreach bracket (18W/36W spigot entry /SE versions) NPRO4-0007 Standard 18W wall mounting outreach bracket (use with SPRO4-0003) NPRO4-0008 Standard 36W wall mounting outreach bracket (use with SPRO4-0003) NPRO4-0012 Eyebolt mounting assembly SPRO5-0005 Looping Kit (Allows looping from both ends of luminaire) SPROT-0021 Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications. November 2014 Rev 2 Chalmit, PO BOX 5575, Glasgow G52 9AP Tel: +44(0) 141 882 5555 Fax: +44(0)141 883 3704 www.chalmit.com [email protected] ®
© Copyright 2024