Annexure I - Bank Of India

SCHEDULE QUANTITIES
NAME OF WORK: -REMAINING INTERIOR WORK AT FIRST FLOOR B.O.I. S.M.E. CITY
CENTER JAIPUR.
S
NO
1
PARTICULARS
QTY UNIT
PARTLY GLAZED FULL HEIGHT PARTITION
Providing and fixing in position partly glazed Full Height Partition work as
shown in the drawing nos. (3) & (4) including door as shown in the drawing
No. (13) in frame work at 2'x2' grid (horizontally and vertically) comprising of
2" x 1½" T.W. section and / or as per frame work shown in the drawings
with 6mm plywood on both sides finished with 1mm thick laminates of
approved shade and colour as shown in the drawings. Item to include 8mm
thick glass with etching and frosting as per design and 2" x2" T.W. member
for door sides and glass sides and T.W. door frame to take 8mm thick glass
with etching and frosting
All exposed T.W. surfaces to be finished in melamine polish of matching
laminate colour as directed including all necessary Stainless Steel finish
fittings/ hardware, door closers, Godrej locks and wood preservative paint
etc. as per list of approved material and as approved by the Project
Consultant/ Bank complete in all respects. (Note: In case of false ceiling,
the vertical T.W. members to be fixed with pucca ceiling but the area of
450
partition payable will be below the flase ceiling only).
2
PARTLY GLAZED LOW HEIGHT PARTITION:
Providing and fixing in position partly glazed low height partition (21/2"
thick) in frame work with T.W vertical members at 2' c/c and 3 horizontal
members at equal distance comprising of 2"x 114" T.W. Section with 6
mm plywood on both sides finished with 1 mm thick laminates of
approved make and shade as shown in drawing no. (14) or (3). Item to
include 12 mm thick glass (clear/frosted) to be fixed as shown in drawing.
The exposed edges of the glass to be finished in mirror polish. T.W runner
should be melamine polished in matching colour of laminate etc
complete in all respects.
3
Sq.ft
165 Sq.ft
MANAGER'S TABLE/OFFICER'S TABLE:
Providing and fixing in position Manager's Table of size 5'-6"x 2'-6" as per
drawing no.(6)/ Officer's Table of size 4'-6" x 2-6" as per drawing no. (5)
including Side Storage
(Credenza) by using 25mm thick plywood for
top and 18 mm thick plywood for all other horizontal and
vertical
members. Telescopic CPU Stand/ ready made Keyboard tray shall be
provided of approved model and make.
Footrest made with T.W.
member of size
4"x 1 14 " finished with french polish. Side Storage (
Credenza) as per drawing shall be provided. Facia of Side Storage
(Credenza) shall be
finished with 1mm thick laminates as shown in the
drawing and all other sides shall be finished with white enamel paint.
The Side Storage (Credenza) shall be provided with handles (Stainless
Steel finish) and channels as per approval of the Project Consultant / Bank.
All exposed plywood surfaces to be finished with 1mm thk. laminate of
approved make & shade, and all exposed edges of table top & ply verticals
to have 1" x 1/4" T.W.Iipping. All exposed T.W. sections to be melamined
and internal surfaces to have white enamel paint as directed. Item to
include plywood boxing, all necessary hardware and fittings in Stainless
Steel finish, lipping to all edges etc. complete in all respects.
a) CHIEF Manager's Table of size6'-0"x3'-0"
b) Officer's Table of size 5'-0" x 2-6"
1
6
Nos.
Nos.
RATE
AMOUNT
4
FALSE CEILING (Armstrong)
Proving & fixing in position false ceiling in Armstrong 600 x 600 mm x 15/16
mm Dune Supreme RH 99 Prima tile with Tegular edge framework as
specified by Armstrong Co. with suspenders wherever required. Making
necessary framework for A.C. ducting, if any, and necessary cutouts for for
diffusers and light fittings, taping and finishing to proper line & level,
including making grooves and trap doors for A.C. unit in 18mm thick M.R.
Grade Plywood with Stainless Steel hinges & locks with moulding 1" x 1" for
edges including finishing with White Plastic Emulsion Paint etc. complete in
all respects.
(Note:- Only the plan area will be measured for payment. No extra payment
will be made for cutout, gooves, grooves, mouldings etc.)
690
5
Sq.ft
FALSE CEILING (Gypsum Board)
Providing & fixing in position false ceiling in Gypboard 12mm thick for
horizontals & verticals fixed over G.I. framework as specified by India
Gypsm Co. Ltd. including trap doors for A.C. unit in 18mm thick M.R. Grade
Plywood with Stainles Steel hinges & locks with moulding 1" x 1" for edges
including finishing with White Plastic Emulsion Paint etc. complete in all
respects.
(Note:- Only the plan area will be measured for payment. No extra payment
800
will be made for cutout, gooves, grooves, mouldings etc.)
Sq.ft
6 TOUGHENED GLASS DOOR:Providing & fixing entrance glazed door with12mm thick toughened glass
with T.W. top and bottom rails made out of 40mm x 200mmteak wood
member, including for any support to hold the door in position & melamine
polish / Duco paint & also including all necessary fitting, handles, locks etc.
complete in all respect as directed by Architect/Bank. Rate is included
etching work on glass of approved design.
60
Sq.ft
0
Sq.ft
P & F Pin Up Boards fabricated with 12mm ply backup supporting Felt/ Soft
Board covered with velvet cloth approved colour, framed with TW moulding
on all sides complete fine polished.
30
Sq.ft
7 FACADE OF ENTRANCE DOOR
Proving and fixing in position Aluminium composite panel Boxing with PVDF
coating & LDPE core laminated Eurobond / Altobond/ Alukbond Exterior
Grade 4 mm thick with composite of (0.5mm - 3mm- 0.5mm) including
fabrication for the same with aluminium sections, required hardware, silicon
sealent (Dow Corning 789) masking tape, necessary scafforlding etc. as
detailed in drawing no. (11) complete in all respects.
8
9
PIN UP/ NOTICE/ DISPLAY BOARDS
FULL HEIGHT STORAGE / LOW HEIGHT STORAGE
/BACK STORAGE(Credenza)
Providing and fixing in position Full height Storage / Low
Height Storage/ Back Storage(Credenza) as shown in Drg. No. (8), (9)
& (10) respectively using Plywood of required thickness finished with
1mm thick laminates as shown in the drawing and all other sides shall be
finished with white enamel paint as detailed therein. The Storage Units
shall be provided with handles (Stainless Steel finish) as per approval of the
Project Consultant / Bank.
All exposed plywood surfaces to be finished with 1mm thk. laminate of
approved make & shade and all exposed edges of plywood to have 1" x
1/4" T.W. lipping. All exposed T.W. sections to be melamined in matching
colour laminate and internal surfaces to have white enamel paint as
directed. Item to include all necessary hardware and fittings in Stainless
Steel finish, Godrej multi purpose locks including magnetic ball catcher etc.,
complete in all respects.
380
Sq.ft
10 SOFA SETS:
2" thick pine wood fabricated as per designed shape sofa sets
as per layout and details without armrests, 100mm MM SHD foam
75mm MM SHD Foam " Sleepwell/ Arvind" make for seat and back with
25mm extra U foam for shape and upholstry as decided Rs. 300-400.00
per meter and sloping back with contoured seat and back in curvature
MS wire covered with cloth as seat demarcation/ fabric support with Z
springs in seat and back complete fine finish as per instruction of the
architect/ bank and as per design- Seat Size 1'.9"x 1'.9"
0
Seats
0
Nos
0
Nos
11 SOFA SIDE TABLE:
P & F Glass top sofa side table in designed shape, top size approximately
2'.0" x 1'.9" in 12mm bevelled edge glass. Bottom supporting framework
made of Stainless Steel complete fine finish
12 CENTER TABLE:Providing & placing in position center tables of size 600x600x450 with 40
mm teakwood legs 62.5x35 mm teak frame at top with inlay work as
detailed including polishing and 10 mm beveled brown glass on top
13 BLINDS:
P & f vertical blinds of Vista Levolor make 100mm scotch guard
coated louvers. 50mmx18mm extruded aluminium headrail of 1.2mm
thickness to house high grade polymer control unit of derlin plastic with
1:3:5 gear ratio, 3 key ways aluminium tilt rod, moulded plastic runners
with 2 wheels, spacers made of moulded plastic. The bottom weight
to be powder coated galvanised steel attached with bottom chain
110 Sq.ft
having balls of 2mm & equally spaced clear clips fixed on it.
14 FLUSH DOOR :Providing & fixing flush doors 35mm thick with 1.0mm laminates on both
sides. The item includes Teakwood chaukhat made from 75x50 teakwood.
The door to have 12mm teak wood lipping on edges. The door is to be
complete with Cylindrical door Lock (Godrej make) 200mm SS/Brass
handles, brass Stopper, Tower bolts, 119mm Brass/SS hinges etc. all
Teakwood surface to be melamine polished complete to the satisfaction of
Architect/ Employer size 750x2100
30
Sq.ft
Providing & Fixing Wall paneling ( upto3’-0” ht.& centre columns full height
paneling) with 6mm comm. Ply and finished with 1.0 mm laminate in two or
more colures fixed on 50x25 kail wood frame at 600 centre to centre both
sides.The paneling to have 25x60 mm teak moulding on top. Complete with
melamine polish.
300
Sq.ft
15 WALL PANELLING :-
16 TEXTURE PAINT:Providing & painting texture paint in two or more shades with roller and
spray, after preparing the base for the same (durotex or spectrum )
600 Sq.ft
17 DISTAMPER ON WALLS:Providing & painting the wall oil distemper after preparing the base of the
same and applying two or more coats with final coat given with roller finish.
Complete in all respect.
500 Sq.ft
18 SIDE TABLE :1'4" wide top filling racks 1.0mm laminated top as approved lower 19mm
block board box 1'4" deep (clear size) and drawers and shutters at
designated places and all visible sides in approved style laminate, all
hardware in brass, godrej locksets handles etc. as per instructions of the
architects/ bank and details complete fine finish.Drawer should slide on
telescopic channels
60
Sq.ft
TOTAL
SCHEDULE QUANTITIES
NAME OF WORK: -ELECTRICAL WORK AT FIRST FLOOR BOI SME CITY CENTER JAIPUR.
S
NO
PARTICULARS
QTY UNIT
1 MAINS WIRING
Wiring for Sub Mains / Light/ Power circuits with designated PVC insulated
copper conductor cable in recessed / surface PVC conduit 2.0 mm thick
with suitable junction boxes, bends etc. including earthing from the
distribution board as required/ designed.
a) 2x10 sq.mm +1 x 6.0 sq.mm
b) 2x6 sq.mm +1 x 4.0 sq.mm
c) 2x4 sq.mm +1 x 2.5 sq.mm
2
0 Rmtrs
0 Rmtrs
30 Rmtrs
LIGHT & FAN FIXTURES:
P & F Accessories as per the following details and making connections
a) G.E./ BAJAJ/PHILIPS/WIPRO - TBS 300/236 Mirror Optic Twin Tube
26
Nos.
0
Nos.
c) G.E./ BAJAJ Downlighters FBH 150/118 incl. 1x18 w PL Lamps
4
Nos.
d) P & F Wall fans - Crompton/ bajaj/ Usha - 400mm sweep
13
Nos.
e) Ceiling fan Crompton make 48”in size ( High speed)
2
Nos.
f) P & F Exhaust fans - Usha/ Crompton/ Bajaj make
2
Nos.
g) P & F Patti tubelights on walls - Philips/ Bajaj incl. tube rod
4
Nos.
h) P & F ceiling mounted tubelights 2x36 w tube rods complete incl rods -
52
Nos.
Tubelight Recessed False Ceiling mounted tubelights including 2 x 36 w PL
Lamps complete
b) G.E./ BAJAJ Mirror optic recessed twin tubelight incl. 2x11 w PL LampsFBS 285/211
G.E./ BAJAJ
3 INTERNAL WIRING
i) Wiring for light, fan, call bell and 5A plug point with 2x1.5 sq.mm. PVC
insulated copper conductor cable in recessed / surface PVC conduit 2.0
mm thick with suitable junction boxes switches and plugs etc. all fitted in
concealed 16 SWG zinc passivated embedded in walls with modular
switches continuous running of 1.00 sq.mm. PVC insulated copper solid
conductor cable earthing the fixtures outlet boxes and wiring of sub circuit &
mains circuit with supply and laying of 2x2.5 sq.mm. PVC insulated copper
conductor cable and 1 sq.mm. PVC insulated copper conductor cable for
earthing as required (All wiring items include provision of conduit and all
fittings / conduit accessories complete wiring and switches)
RATE
AMOUNT
a) Wiring as above for a light point controlled by a 6A switch.
35
Nos.
b) Wiring as above for two light points controlled by a 6A switch.
2
Nos.
c) Wiring for extension points controlled by existing switches.
4
Nos.
d) Wiring as above for universal 2/3 pin 6A socket with switch outlet point.
6
Nos.
i) Wiring etc. as above for one switch per circuit
6
Nos.
ii) Wiring etc. as above for two switches per circuit
1
Nos.
iii) Wiring etc. as above for UPS 3 sockets controlled by 1 - 16 A switch
9
Nos.
iv) Wiring etc. as above for AC point including p &f Metal MCB box with 16-20
6
Nos.
0
Nos.
0
Nos.
0
Nos.
ii) Wiring for power/ AC point with 2x4.0 sq.mm. PVC insulated copper
conductor cable in recessed / surface PVC conduit 2.0 mm thick with
suitable junction boxes switches and plugs etc. all fitted in concealed 16
SWG zinc passivated embedded in walls with modular switches continuous
running of 1.50 sq.mm. PVC insulated copper solid conductor cable
earthing the fixtures outlet boxes and wiring of sub circuit & mains circuit
with supply and laying of 2x6.0 sq.mm. PVC insulated copper conductor
cable and 2.5 sq.mm. PVC insulated copper conductor cable for earthing as
required (All wiring items include provision of conduit and all fittings /
conduit accessories complete wiring and switches)
a) Wiring as above for 6 pin 16A socket with switch outlet point.
A MCB complete
4 DISTRIBUTION BOARDS
a) Supplying, erection and commissioning of 12 way SPN MCB distribution
board comprising of recessed sheet steel enclosure with double door with
i) 63A, 4P MCB as incoming - 1 No.
ii) 6 - 20 Amp SP MCB - 10 Nos
b) Supplying, erection and commissioning of 8 way TPN MCB distribution
board comprising of recessed sheet steel enclosure with double door with
loose wire box 63A tinned copper bus bars neutral and earth strips
interconnections etc. complete with following mountings as reqired.
i) 100 A ELCB 4P as incoming - 1 No.
ii) 10- 25 Amp SP MCB - 12 Nos
iii) 32 Amp SP MCB - 8 Nos
c) Supplying, erection and commissioning of 4 way SPN MCB distribution
board comprising of recessed sheet steel enclosure with double door with
loose wire box etc. complete with following mountings as reqired.
i) 63 A ELCB 4P as incoming - 1 No.
ii) 63 Amp 4P MCB - 1 Nos
5 EARTHING
a) Earthing with copper plate electrode 600x600x3mm including accessories
and providing masonary enclosure with MS cover plate having locking
arrangemnt, watering pipe and excavation in soil 3MTRS minimum,
including salt and charcoal as required including p &f 8 Nos SWG copper
wire in recess or surface for earthing as per design and detail complete.
0
Nos.
0
Rmtrs
i) P & F 4 core 16 sqmm aluminium cables
0
Rmtrs
ii) P & F 3.5 core 50 sqmm aluminium cables
0
Rmtrs
iii) P & F 4 core 10 sqmm aluminium cables
0
Rmtrs
0
Nos.
b) Supplying, laying and terminating earth connection with 8 SWG Copper
wire
6 CABLES:
P & F cables 1.1 KV PVc insulated armoured cables on saddles, clamps
and inserted in G I pipe wherever exposed complete as designed
7 PANEL:
P & F cubical type Main Panel of 18 SWG CRCA Sheet Steel C type base
MS Channel for grouting on the floor complete with MCCBs, MCBs, meters,
CT etc. complete in all respect, insulated Bus Bar with heat shrinkable PVC
Sleeve in suitable Bus Bar Chamber wiring, name plates, danger plate,
earth bus etc and comprising of compartments with hinged doors and
rubber gasket, cable alleys on both sides, bus bar chamber with bolted door
and rubber gasket etc. The panel being of dust and vermin proof
construction to be painted with primer and smoke grey paint minimum 2
coats to look attractive.
Incomer 160 A TP - MCCB - 1 Nos
160 Amp Bus Bar - 1 Nos. Digital Ammeter and Voltmeter with SS.
Genset Onload Changeover - 1 Nos 100 A
Outgoings
40 A TPN MCB - 10 KA - 2 Nos
63 A TPN MCCB -2 Nos
TOTAL
-
C. DATA & VOICE WORKS:
1) LAN Cabling
P & F approved make - Dlink/ AT&T/ Equv. Computer LAN cabling for
Networking in pvc conduit/ casing caping as designed with all accessories
complete as per design and details - CAT VI
2) I/O Outlet P & F approved make I/O outelt points at designated places,
60 Rmtrs
8
Nos.
3) Patch cord P & S approved make computer patch cords complete
8
Nos.
4) Providing and fixing 16-PORT SWITCH (LINKSYS-MAKE)
1
Nos.
5) Providing and fixing JACK PANEL for 16-port switch D - Link
1
Nos.
6) Providing and fixing of 12U RACK for above size 2 X 2 ft
1
Nos.
7) Commisioning of above switches with ferroling etc. comp
9
Nos.
8 WIRING FOR TELEPHONE/ EPABX
a) S & F TAG Block - KRONE suitable for 15 pairs
1
Nos.
including testing and making connections complete
b) Supplying laying and terminating and colour code identification on either
ends 0.6 mm dia annealed tinned screen protected copper conductor PCC
sheathed TWO PAIR telephone cable in PVC 2.0mm thick conduits as
required.Including s & f modular type telephone outlet housed in zinc
passivated box/ pvc box with suitable connector strip in recessed wall/
partitions as required
50 Rmtrs
c) S & F modular type telephone outlet 1 pair cord outlet
d) S & L 6 pair telephone cable in pvc conduit as main line including all
connections, and all accessories etc. complete
7
Nos.
0
Rmtrs
TOTAL