1. Ingeniería

Please use your arrow key to scroll up or down the webpage.
TEL: 021 7019210
E-mail: [email protected]
ACCREDITED AGENTS FOR
EQUIPSLAB
in South Africa
Contact Person: Sedick
Tel: 021 7019210
E-mail : seimex.co.za
Thank you for visiting our webpage.
6. Incubator
6.1. Dual-Purpose Oven/Incubator
GP-B/GP-BE Series Dual-purpose Oven/Incubator
Features:
● Stainless steel chamber; four square semicircle transition; flexible positioning and
removable shelf, air duct lateral plate & bottom heater covering are easy assembly
and disassembly for convenient cleaning
● Micro-computer high-brightness digital or LCD（E）temperature controller, which
has functions of timing and over-temperature protection
● Adjustable fan speed; set blowing rate as needs to meet the multiple requirements
of experiment
● Independent temperature safety device; auto alarm and heating suspend when
main controller fails to work, which provide double protection to ensure experiment
run safely and no accident would happen
● Door with wide double-glass observation window, adjustable air-tight buckle lock
and silicon rubber seal which efficiently prevent heat loss
Specifications:
Models
GP-30B
GP-45B
GP-65B
GP-125B
GP-230B
GP-30BE
GP-45BE
GP-65BE
GP-125BE
GP-230BE
Power supply
Temperature range
AC110/220V, 50/60Hz
A. as incubator: RT+5~80°C; B. as oven: 80~250°C
Resolution
0.1°C
Temperature stability
A: ±0.5°C; B: ±1.0°C
Ambient temperature
+5~35°C
Input power
Capacity
Chamber dimensions
0.3Kw
0.3Kw
0.4Kw
0.6Kw
0.7Kw
30L
45L
65L
125L
230L
310×310
350×350
400×360
500×450
600×500
×310mm
×350mm
×450mm
×550mm
×750mm
Timing range
1~9999min
- 181 -
PH Series Dual-purpose Oven/Incubator
Descriptions:
This new dual-purpose oven/incubator which is forced-air convection can provide
direct assistance as well as reliable guarantee to colleges, scientific research and
manufacture departments.
Features:
● Polished stainless steel chamber, semicircular arcs at corners for easy cleaning,
and the space between the shelves in the chamber is adjustable
● Microprocessor temperature controller ensures a precise and reliable control
● Forced-air convection
● Double layer glass door, large viewing window
Specifications:
Models
PH-030A
Power supply
Temperature range
PH-050A
PH-070A
AC110/220V, 50/60Hz
A. as incubator: RT+5~80°C; B. as oven: 80~220°C
Resolution
0.1°C
Temperature stability
A: ±0.5°C; B: ±1.0°C
Ambient temperature
+5~35°C
Input power
PH-140A
850W
1100W
1550W
2050W
Chamber dimensions 340×325×320 420×395×350 450×400×450 550×450×550
Overall dimensions
620×490×490 720×590×520 740×590×630 840×570×730
Shelves
2pcs
Timing range
1~9999min
- 182 -
6.2. Heating Incubator
DH Series Constant Temperature Incubator
Descriptions:
It is applied in industrial & mining enterprise, food processing industry, agriculture,
biochemistry and medicine industry for bacteria and microorganism culturing.
Features:
● High-quality cold rolling steel electrostatic spraying exterior
● Stainless steel inner chamber; foursquare semicircle transition, convenient for
cleaning; space between shelves is adjustable
● Micro-computer intelligent control system with PID program, large screen digital
display and light touching operation key
● Function of timing, over-temperature protection and auto-power-break-off
● Double door seal, which is convenient to on/off
Specifications:
Models
DH3600B
Power supply
DH4000B
DH5000B
AC110/220V, 50/60Hz
Temperature range
RT+5~65°C
Resolution
0.1°C
Temperature stability
±0.5°C
Ambient temperature
+5~40°C
Capacity
DH6000B
45L
50L
125L
210L
Chamber dimensions 360×360×360 400×350×350 500×500×500 600×580×600
Input power
0.25Kw
0.25Kw
Timing range
0.5Kw
1~9999min
- 183 -
0.6Kw
WPL Series Constant Temperature Incubator
Features:
● Natural convection heating circulation and gentle breeze circulation ensure
temperature evenness
● Stainless steel chamber; foursquare semicircle transition; flexible positioning and
removable shelf for convenient cleaning
● Large LCD display, multiple groups of data to be displayed at a time; function of
timing and over-temperature protection
● Independent temperature safety device, which will automatically breaks off when
over temperature limit to ensure experiment run safely
● RS-485 interface for network connection
● Door is with wide hollow tempered glass observation window, adjustable air-tight
buckle lock and silicon rubber seal
Specifications:
Models
WPL-30BE WPL-45BE WPL-65BE WPL-125BE WPL-230BE
Power supply
AC110/220V, 50/60Hz
Temperature range
RT+5~80°C
Resolution
0.1/0.2°C
Temperature stability
±1.0°C
Ambient temperature
+5~40°C
Capacity
Chamber dimensions
Input power
30L
125L
230L
310×310 350×350 400×360
500×450
600×500
×310mm ×350mm ×450mm
×550mm
×750mm
600W
700W
150W
45L
250W
Timing range
65L
500W
1~9999min
- 184 -
DHP Series Heating Incubator
Descriptions:
Provided as an necessary equipment for scientific research to colleges as well as
biological, agricultural and scientific research departments for storage of mould and
biology cultivation.
Features:
● Microprocessor controller（with timing function）
● With inner glass door for easy observation
● Polished stainless-steel chamber
● Independent temperature-limiting alarm system ensures experiments run safely
（option）
● Printer connector and RS485 connector are options which can connect printer and
computer to record the parameters and the variations of temperature（option）
Specifications:
Models
DHP-9032
Power supply
DHP-9052
RT+5~65°C
Resolution
0.1°C
Ambient temperature
Capacity
DHP-9162
AC110/220V, 50/60Hz
Temperature range
Input power
DHP-9082
+5~35°C
200W
250W
350W
550W
35L
50L
80L
160L
Chamber dimensions 340×320×320 415×360×355 500×400×400 500×500×650
Overall dimensions
Shelves
620×490×490 690×360×355 500×400×560 790×630×810
2pcs
2pcs
Timing range
2pcs
1~9999min
- 185 -
3pcs
BPH Series Heating Incubator – 1
Features:
● Polished stainless-steel chamber, semicircular arcs at corners for easy cleaning,
and the space between shelves in the chamber is adjustable
● Auto-controller of fan speed to prevent damage to the samples
● Large LCD screen to display more data at same time
● Self-check function easy to identify problems
● Over temperature and temperature difference alarms
● Independent audible and visible temp-limiting alarm system ensures experiments
run safely（option）
● Programmable controller: 15 periods 30 steps, 1 to 99h99min for each period, fan
speed 0 to 100% adjustable（option）
● RS485 connector is option which can connect computer to record the parameters
and the variations of temperature（option）
Specifications:
Models
BPH-9042
BPH-9082
BPH-9162
Power supply
AC110/220V, 50/60Hz
Temp. range
RT+5~80°C
Resolution
0.1°C
Temp. stability
±0.3°C
Ambient temp.
+5~40°C
Input power
BPH-9272
250W
350W
550W
750W
Chamber dimensions 350×320×350 400×400×500 500×400×750 520×450×1050
Volume
40L
80L
Shelves
150L
2pcs
Timing range
1~9999min
- 186 -
250L
BPH Series Heating Incubator – 2
Features:
● Polished stainless-steel chamber, semicircular arcs at corners for easy cleaning,
and the space between the shelves in the chamber is adjustable
● Auto-controller of fan speed to prevent damage to the samples
● Large LCD screen to display more data at same time
● Self-check function easy to identify problems
● Over temperature and temperature difference alarms
● The independent audible and visible temperature-limiting alarm system ensures
experiments run safely（option）
● Programmable controller: 15 periods 30 steps, 1 to 99 hs 99mins for each periods,
fan speed 0 to 100% adjustable（option）
● RS485 connector can connect computer and printer to record the parameters and
the variations of temperature（option）
Specifications:
Models
BPH-9056A
Power supply
BPH-9106A
AC110/220V, 50/60Hz
Temperature range
RT+10~200°C
Resolution
0.1°C
Temperature stability
±1.0°C
Temperature uniformity
Input power
Chamber dimensions
BPH-9156A
5%
700W
1100W
1600W
375×370×370mm 455×430×510mm 560×530×595mm
Volume
50L
100L
175L
Shelves
2pcs
2pcs
3pcs
Timing range
1~9999min
- 187 -
6.3. Cooling Incubator
SPX Series Biochemical Incubator
Descriptions:
This equipment is widely used in environmental protection, epidemic prevention,
work stock, chemical pharmaceutical, drug test, fishery and other areas of research
experiment & production department. It is the specialized thermostatic equipment
for water analysis, BOD test, and bacteria, moulds and microorganism cultivation
and storage, as well as plant cultivation and seed-breeding test.
Features:
● Stainless steel inner chamber; foursquare semicircle transition, convenient to
clean; space between shelves is adjustable
● Micro-computer control system; LCD with functions of time setting, parameter
memorizing and power reset recovering
● Fluoride-free refrigeration and gentle breeze circulation
● Test hole of Φ52mm at left side of container
● Double door seal; tempered glass silicon rubber seal inner door & magnetic rubber
seal outer door, which are convenient to on/off; inner chamber with light for
convenient observation
Additional Features of Functional Type:
● Intelligent programmed temperature controller with programs of 30 sections to
ensure timing, repeated or multistep running of temperature system
● Function of self-diagnosis, sensor fault alarm and over temperature protection
● No freezing thanks to intelligent refrigeration and defrosting system
- 188 -
● Function of auto running, auto stopping and timing running, as well as parameter
memorizing, power reset recovering and temperature display revising
● Watch timer and independent temperature safety device, which automatically
break off when over temperature limit
● RS-485 network connection interface for long-distance control
Specifications:
Models
Standard Type
SPX-70BIII
Power supply
SPX-150BIII
AC110/220V, 50/60Hz
Temperature range
0~65°C
Resolution
0.1°C
Temperature stability
±0.5°C
Ambient temperature
+5~30°C
Capacity
Chamber dimensions
Input power
70L
150L
300W
500W
1~9999min
Functional Type
SPX-70BX
Power supply
SPX-150BX
0~65°C
Resolution
0.1°C
Temperature stability
±0.5°C
Ambient temperature
+5~30°C
Input power
SPX-250BX
AC110/220V, 50/60Hz
Temperature range
Chamber dimensions
800W
R134a
Timing range
Capacity
250L
420×350×500mm 500×400×750mm 500×500×950mm
Coolant
Models
SPX-250BIII
70L
150L
250L
420×350×500mm 500×400×750mm 500×500×950mm
300W
500W
Coolant
R134a
Timing range
1~9999min
- 189 -
800W
MJX Series Mould Incubator
Descriptions:
This equipment is widely used in environmental protection, epidemic prevention,
work stock, chemical pharmaceutical, drug test, fishery and other areas of research
experiment and production department. It is the specialized thermostatic
equipment for water analysis, BOD test, and bacteria, moulds and microorganism
cultivation and storage, as well as plant cultivation and seed-breeding test.
Features:
● Stainless steel inner chamber; foursquare semicircle transition, convenient to
clean; space between shelves is adjustable
● Micro-computer control system ensures precise and reliable temperature control;
LCD enables multiple groups of data to be displayed at a time; ultraviolet germicidal
lamp
● Independent humidification, sterilization & temperature limit system with function
of over-temperature alarm and auto-power-cut-off
● Test hole of Φ52mm at left side of container
● Double airtight door structure
● Fluoride-free refrigeration
Additional Features of Functional Type:
● Intelligent programmed temperature and humidity control system with program
of 30 sections ensure timing, repeated or multistep running of temperature and
humidity
● No freezing thanks to intelligent refrigeration and defrosting system
● Function of auto running, auto stopping and timing running, as well as parameter
- 190 -
memorizing, power reset recovering and temperature display revising
● Watch timer and independent temperature safety device, which auto breaks off
when over temperature limit
● RS-485 network connection interface for long-distance control
● Function of self-diagnosis, sensor failure alarm and over temperature protection
Specifications:
Models
Standard Type
MJX-70BIII
Power supply
Temperature range
MJX-150BIII
AC110/220V, 50/60Hz
Humidification: 10~65°C; No humidification: 0~65°C
Resolution
Temperature stability
0.1°C
High temperature: ±0.5°C; Low temperature: ±1.0°C
Humidity range
60~90%RH
Resolution
5~8%RH
Ambient temperature
+5~30°C
Capacity
Chamber dimensions
Input power
70L
150L
300W
500W
1~9999min
Functional Type
MJX-70BX
Power supply
MJX-150BX
Humidification: 10~65°C; No humidification: 0~65°C
0.1°C
High temperature: ±0.5°C; Low temperature: ±1.0°C
Humidity range
60~90%RH
Resolution
5~8%RH
Ambient temperature
+5~30°C
Capacity
Chamber dimensions
Input power
MJX-250BX
AC110/220V, 50/60Hz
Resolution
Temperature stability
800W
R134a
Timing range
Temperature range
250L
420×350×500mm 500×400×750mm 500×500×950mm
Coolant
Models
MJX-250BIII
70L
150L
250L
420×350×500mm 500×400×750mm 500×500×950mm
300W
500W
Coolant
R134a
Timing range
1~9999min
- 191 -
800W
HWS Series Constant Climate Incubator
Descriptions:
With precise temperature and humidity control system, this equipment provides
variety of environmental simulate conditions that industrial research and biological
test need. It is used in medicine, textile and food production experiment, as well as
in product stability, raw material, packing and lifetime test.
Features:
● Mirror finished stainless steel inner chamber; foursquare semicircle transition,
convenient to clean; space between shelves is adjustable
● Micro-computer temperature & humidity controller with program of 30 sections to
ensure timing, repeated or multistep running of temperature & humidity; function of
over temperature protection and timing; LCD enables multiple groups of data to be
displayed at a time
● Test hole of Φ52mm at left side of chamber
● Brand compressor, fluoride-free refrigeration
● Double airtight door, which is convenient to on/off; with light in inner chamber for
convenient viewing（The lamp can be replaced with ultraviolet ray sterilizing lamp as
user’s need）
● Equipped with ultrasonic humidifier and intelligent atomizer
Additional Features of Functional Type:
● No freezing in inner chamber thanks to intelligent refrigeration and defrosting
system
● Function of auto running, auto stopping & timing running, as well as parameter
memorizing, power reset recovering and temperature display revising
● Watch timer and independent temperature safety device; auto alarm and auto
- 192 -
break off when over temperature limit to ensure experiment runs safely and no
accident would happen
● Function of self-diagnosis, sensor failure alarm and over temperature protection
● RS-485 network connection interface for long-distance control
Specifications:
Models
Standard Type
HWS-70B
Power supply
Temperature range
HWS-150B
AC110/220V, 50/60Hz
Humidification: 10~65°C; No humidification: 0~65°C
Resolution
Temperature stability
0.1°C
High temperature: ±0.5°C; Low temperature: ±1.0°C
Humidity range
45~90%RH
Resolution
5~8%RH
Ambient temperature
+5~35°C
Capacity
Chamber dimensions
Input power
70L
150L
300W
500W
Functional Type
HWS-70BX
HWS-150BX
Humidification: 10~65°C; No humidification: 0~65°C
0.1°C
High temperature: ±0.5°C; Low temperature: ±1.0°C
Humidity range
60~90%RH
Resolution
5~8%RH
Ambient temperature
+5~30°C
Capacity
Chamber dimensions
Input power
HWS-250BX
AC110/220V, 50/60Hz
Resolution
Temperature stability
800W
1~9999min
Power supply
Temperature range
250L
420×350×500mm 500×400×750mm 500×500×950mm
Timing range
Models
HWS-250B
70L
150L
250L
420×350×500mm 500×400×750mm 500×500×950mm
300W
500W
Timing range
1~9999min
- 193 -
800W
GZX Series Climate Incubator with Illumination
Descriptions:
GZX illuminating incubator adopts environmental fluoride-free compressor and
advanced micro-computer programmable control mode. It is widely used in
microorganism cell culturing, seed germination, seedling raising & plant cultivation,
as well as insects rearing, other constant temperature illuminating experiments.
Features:
● Micro-computer temperature controller with multiple storable programs, each for
maximum of 99 hours to set
● Large LCD display
● Substantially three-side or four-side illumination;hollow glass with good spectrum
characteristic and low thermal emissivity, which is suitable for plant growth. The
unique illumination and heat dissipation techniques to ensure uniform illumination
and phototropism of plants
● Unique compressor and heater balanced control ensures accurate temperature
control and less temperature fluctuation
● Temperature safety device with over-temperature optical & audible alarm to avoid
damage of specimen under extreme climate
● SUS304 mirror stainless steel inner chamber; foursquare semicircle transition,
freely removable shelf for convenient cleaning
● Independently temperature limit system, auto-break-off ensures safe experiment
and no accident would happen
- 194 -
● Functions of parameter memorizing and power reset recovering when powercut-off and system-halt
● Brand compressor, fluoride-free refrigeration
● crystal screen controller with 30 sections of storable program
● Standard configuration: RS485 interface
Specifications:
Models
Three-side Illumination
GZX-250E
Power supply
Temperature range
GZX-300E
AC110/220V, 50/60Hz
With illumination: 0~60°C; without: 10~60°C
Resolution
0.1°C
Temperature stability
Temperature uniformity
±1.0°C
±1.5°C（250/300L）; ±2.0°C（400L）
Coolant
R134a
Ambient temperature
Capacity
Chamber dimensions
Input power
Illumination degree
+5~35°C
250L
300L
550W
600W
700W
0~12000LX
0~16000LX
0~20000LX
1~9999min
Four-side Illumination
GZX-250EF
Power supply
Temperature range
GZX-300EF
With illumination: 0~60°C; without: 10~60°C
0.1°C
Temperature stability
±1.0°C
±1.5°C（250/300L）; ±2.0°C（400L）
Coolant
R134a
Ambient temperature
Capacity
Chamber dimensions
Input power
Illumination degree
GZX-400EF
AC110/220V, 50/60Hz
Resolution
Temperature uniformity
400L
500×530×950mm 550×580×950mm 590×620×110mm
Timing range
Models
GZX-400E
+5~35°C
250L
300L
400L
500×530×950mm 550×580×950mm 590×620×110mm
550W
600W
700W
0~15000LX
0~20000LX
0~22000LX
Timing range
1~9999min
- 195 -
RGX Series Plant Growth Incubator
Descriptions:
This series of product is high-precision thermostatic equipment with functions of
illumination & humidification. It is widely used in plant cultivation, seed germination,
seed growing, histocyte and microbe culturing, as well as small animal raising and
other temperature and humidity experiments. It is ideal for production and research
of biology, agriculture, forestry, genetic engineering and graziery departments.
Features:
● Micro-computer temperate, humidity and illuminance controller with multiple
storable programs, each for a maximum of 99 hours to set. It simulates the
temperature and humidity in day and night, and chooses the stable illuminance and
humidity that plants need to form a complete simulated natural environment
● Substantial three-side illumination;hollow glass with good spectrum characteristic
and low thermal emissivity, which is suitable for plant growth. Unique three-side
illumination and heat dissipation technique ensures uniform illumination and
photostrophism of plants
● Temperature safety device with over temperature optical and audible alarm to
avoid damage of specimen under extreme climate
● SUS304 mirror stainless steel inner chamber; foursquare semicircle transition,
freely removable shelf for simple and fast cleaning
● Ultrasonic humidification system with the most similar humidifying effect close to
the nature, and high humidity control accuracy and less humidity fluctuation
● Unique anti-leakage design improves air-tightness of inner chamber
● Large LCD screen; independent temperature safety device, which auto breaks off
when over temperature limit to ensure experiments run safely and no accident
would happen
● Functions of parameter memorizing and power reset recovering when powercut-off and system-halt. Low water cut out
- 196 -
● Dual seal rubber strips to ensure good thermal insulation effects of working room
● Standard original import compressor; LCD temperature controller; original import
American humidity senor
● Crystal screen controller with 30 sections of program memory
● Standard configuration: RS485 interface
Specifications:
Models
Three-side Illumination
RGX-250E
Power supply
Temperature range
RGX-300E
AC110/220V, 50/60Hz
With illumination: 10~60°C; without: 0~60°C
Resolution
0.1°C
Temperature stability
Temperature uniformity
±1.0°C
±1.5°C（250/300L）; ±2.0°C（400L）
Humidity range
40~90%RH
Resolution
5~7%RH
Coolant
R134a
Ambient temperature
Capacity
Chamber dimensions
Input power
Illumination degree
+5~35°C
250L
300L
500W
600W
700W
0~12000LX
0~16000LX
0~20000LX
1~9999min
Four-side Illumination
RGX-250EF
Power supply
Temperature range
RGX-300EF
With illumination: 10~60°C; without: 0~60°C
0.1°C
Temperature stability
±1.0°C
±1.5°C（250/300L）; ±2.0°C（400L）
Humidity range
40~90%RH
Resolution
5~7%RH
Coolant
R134a
Ambient temperature
Capacity
Chamber dimensions
Input power
Illumination degree
RGX-400EF
AC110/220V, 50/60Hz
Resolution
Temperature uniformity
400L
500×530×950mm 550×580×950mm 590×620×110mm
Timing range
Models
RGX-400E
+5~35°C
250L
300L
400L
500×530×950mm 550×580×950mm 590×620×110mm
500W
600W
700W
0~15000LX
0~20000LX
0~22000LX
Timing range
1~9999min
- 197 -
6.4. Water-jacket Incubator
GH Series Water-jacket Incubator
Features:
● Micro-computer PID intelligent temperature control system; light touching
operation key for parameter setting; high brightness nixie tube display; function of
timing, over temperature protection and water level switch
● Water-jacket heating method; gentle breeze circulation ensures temperature
evenness
● Stainless steel chamber; inner container angle arc design is easy for cleaning
● Double door seal; tempered glass inner door with silicon rubber seal
● Magnetic rubber seal outer door is easy on/ off with good sealability
Specifications:
Models
GH3000
Power supply
GH4500
GH6000
AC110/220V, 50/60Hz
Heating method
Water-jacket
Temperature range
RT+5~65°C
Resolution
0.1°C
Temperature stability
±0.5°C
Chamber dimension
300×300×450mm 450×450×550mm 600×600×700mm
Overall dimension
420×420×690mm 570×570×845mm 720×720×990mm
Packing dimension
590×550×810mm 730×690×950mm 880×840×1100mm
Input power
200W
400W
Shelf load
700W
15Kg
Timing range
1~9999min
N.W
30Kg
45Kg
70Kg
G.W
42Kg
62Kg
88Kg
- 198 -
GHP Series Water-jacket Incubator
Features:
● With inner glass door for easy observation
● Latest PID controller
● Independent temperature-limiting alarm system ensures experiments run safely
（option）
● Printer connector and RS485 connector are options which can connect printer and
computer to record the parameters and the variations of temperature（option）
Specifications:
Models
GHP-9050
Power supply
GHP-9080
Water temperature
Temperature range
RT+5~65°C
Resolution
0.1°C
Ambient temperature
Capacity
GHP-9270
AC110/220V, 50/60Hz
Heating method
Input power
GHP-9160
+5~35°C
450W
650W
850W
1350W
50L
80L
160L
270L
Chamber dimensions 350×350×410 400×400×500 500×500×650 600×600×750
Overall dimensions
Shelves
500×500×700 550×550×800 650×640×950 750×740×1050
2pcs
2pcs
Timing range
3pcs
1~9999min
- 199 -
3pcs
6.5. CO2 Incubator
CO 2 Incubator（Professional for Cell）
Descriptions:
BPN series CO 2 incubator is upgraded model of HH.CP series, a key equipment for
immunology, oncology genetics and bio engineering. It is widely applicable for
research and production of microorganisms, agricultural science and pharmacology.
Features:
● Polished stainless-steel chamber, semicircular arcs at corners for easy cleaning,
and the space between shelves in the chamber is adjustable
● Microorganism filter at inlet provides 99% filtration of bacteria & dust（Φ<0.3µm）
and supplies pure CO 2 into the incubator
● Microprocessor controller ensures precise and reliable control
● Door temp controller prevents dewfall on glass door of incubator effectively
● Independent audible and visible temp-limiting alarm system ensures experiments
run safely
● Alarm function for temperature difference, door open time, UV working status
● Auto-controller of fan speed to prevent damage to the samples
● hot air sterilizing circulation system
● UV light system for periodic sterilization of chamber（option）
- 200 -
Optional Accessory:
● RS-485 connector and software
● CO 2 pressure releasing valve
● Humidity display
Specifications:
Models
BPN-80CH（UV）
BPN-80CW（UV）
BPN-150CH（UV）
BPN-150CW（UV）
Power supply
Power consumption
Heating method
AC110/220V, 50/60Hz
500/750W
680/950W
Air-jacketed
Water-jacketed
Temperature range
RT+5~50°C
Resolution
Temperature stability
0.1°C
±0.2°C
±0.1°C
0~20%（air-adjusting type）
CO 2 range
CO 2 recovery
≤Calibration×1.2min
Humidity method
Natural evaporization
Ambient temperature
Volume
Chamber dimensions
Overall dimensions
Shelves
+5~30°C
80/155L
80/155L
400×400×500mm
400×400×500mm
530×480×610mm
530×480×610mm
580×500×690mm
580×500×690mm
650×630×800mm
650×630×800mm
2/3pcs
2/3pcs
- 201 -
CO 2 Incubator（Professional for Cell, with Imported Infrared CO 2 Sensor）
Features:
● CO 2 concentration restoration speed
● Polished stainless-steel chamber, semicircular arcs at corners for easy cleaning,
and the space between the shelves in the chamber is adjustable
● Microorganism filter at the inlet provides 99% filtration of bacteria and dust
（Ф<0.3um）and supplies pure CO 2 into the incubator
● Door temperature controller prevents dewfall on the glass door of incubator
effectively
● The independent audible and visible temperature-limiting alarm system ensures
experiments run safely
● The alarm function for temperature difference, CO 2 over concentration and
concentration difference, door open time, UV working status
● Auto-controller of fan speed to prevent damage to the samples
● Hot air sterilizing circulation system
● UV light system for periodic sterilization of chamber（option）
● RS-485 connector: easy to download & save all the data via RS-485 into computer,
and identify problems in time
● PID controller with large LCD screen ensures precise and reliable control
Optional Accessory:
● RS-485 connector and software
● CO 2 pressure releasing valve
● Humidity display
- 202 -
Specifications:
Models
BPN-80CRH（UV） BPN-150CRH（UV） BPN-240CRH（UV）
Power supply
Power consumption
AC110/220V, 50/60Hz
500W
Heating method
750W
Air-jacketed, PID Control
Temperature range
RT+5~55°C
Resolution
0.1°C
Temperature stability
±0.1°C
CO 2 range
0~20%
±0.1%（IR Sensor）
CO 2 control resolution
CO 2 recovery
Temperature recovery
（Door open 30s, recovery to 5%）≤3min
（Door open 30s, recovery to 37°C）≤8min
Humidity method
Natural evaporation >95%
Ambient temperature
Volume
950W
+5~30°C
80L
155L
233L
Chamber dimensions
400×400×500mm 530×80×610mm
Overall dimensions
580×500×690mm 650×630×850mm 720×790×700mm
Shelves
2pcs
3pcs
- 203 -
600×580×670mm
3pcs