Scotchpak MA370M Metal Adhesion Packaging Film Flyer

3M Scotchpak™
MA370M
Metal Adhesion Packaging Film
Laminate of a polyester (PET) base film with an ethylene acrylic acid
copolymer heat-sealable layer (EAA). The 3M proprietary lamination process
does not use solvents or adhesives, minimizing potential for product
interactions. This translucent film provides a strong heat-seal to a variety of
clean metal surfaces, metal vapor coatings and other substrates.
Characteristics:
•Translucent
Polyethylene
• Corona treated
Aluminum vapor coat
• Heat-sealable (EAA)
Polyester
• Matte finish on one side
•Printable
Thermoplastic•
Polymer
High-strength
seal to
Ethylene Vinyl Acetate
Copolymer
metal
surfaces
Polyethylene
Pigmented Polyethylene
Aluminum vapor coat
0.9 mil Acrylic
Ethylene
Acrylic Acid Copolymer
Ethylene
Acid Copolymer
Polyester
2.9 mil White Polyester
Thermoplastic Polymer
Properties
Caliper
Sealant Thickness
Total Thickness
Ethylene
Vinyl
Acetate CopolymerNominal Value
Nominal
Value
(U.S.)
(Metric)
Pigmented Polyethylene
Ethylene
0.90Acrylic
mils Acid Copolymer
22.86 μm
3.81 mils
96.77 μm
Seal Strength
1.3 lb/in
5.78 N/25.4 mm
Tensile
MD
62.5 lb/in
278.0 N/25.4 mm
CD
79.5 lb/in
353.6 N/25.4 mm
1500 yds on
3 in I.D. cores
1372 m on
76 mm I.D. cores
16.4 in
41.7 cm
Width
Maximum single roll width
40 in
101.6 cm
Maximum usable width
51 in
129.5 cm
6 in x 25 yds
15 cm x 23 m
Length
Maximum
Approximate roll diameter
Sample Roll