3M Scotchpak™ MA250M Metal Adhesion Packaging Film Laminate of a polyester (PET) base film with an ethylene acrylic acid copolymer heat-sealable layer (EAA). The 3M proprietary lamination process does not use solvents or adhesives, minimizing potential for product interactions. This translucent film provides a strong heat-seal to a variety of clean metal surfaces, metal vapor coatings and other substrates. Characteristics: •Translucent • Heat-sealable (EAA) •Printable Polyethylene Aluminum vapor coat Polyester • Matte finish on one side High-strength Thermoplastic• Polymer seal to metal surfaces Ethylene Vinyl Acetate Copolymer Polyethylene Pigmented Polyethylene Aluminum vapor coat 1.9 mil Acrylic Ethylene Acrylic Acid Copolymer Ethylene Acid Copolymer Polyester 0.56 mil Polyester Thermoplastic Polymer Properties Caliper Sealant Thickness Total Thickness Ethylene Vinyl Acetate CopolymerNominal Value Nominal Value (U.S.) (Metric) Pigmented Polyethylene Ethylene 1.89Acrylic mils Acid Copolymer 48.01 μm 2.45 mils 62.23 μm Seal Strength 8.0 lb/in 35.59 N/25.4 mm Tensile MD 12.0 lb/in 53.4 N/25.4 mm CD 15.3 lb/in 68.1 N/25.4 mm 1500 yds on 3 in I.D. cores 1372 m on 76 mm I.D. cores Length Maximum Approximate roll diameter 13.45 in 34.2 cm Width Maximum single roll width 40 in 101.6 cm Maximum usable width 50 in 127 cm 6 in x 25 yds 15 cm x 23 m Sample Roll
© Copyright 2024