FEBRUARY MARKETING CAMPAIGN

WURTH
SUPPORTS
THE FOOD
INDUSTRY!
FEBRUARY MARKETING
CAMPAIGN
Metal Division
WURTH AUSTRALIA ARE PROUD TO
BE PART OF THE FOOD INDUSTRY
HACCP Australia provides professionals to the food industry who assist these organisations to develop and implement
ongoing and comprehensive HACCP based Food Safety Programs. All products which bear this symbol have been
endorsed as food safe under HACCP Australia guidelines.
HACCP Ratings
FZP
Food Zone Primary - suitable for use in the food zone and can make contact with food
FZS
Food Zone Secondary - suitable for touching food contact surfaces but not food
SSZ
Splash or Spill Zone - suitable for use in food handling areas but not to make direct contact with food
Products with the NSF logo have been tested and registered by the NSF. The NSF is the largest international conformity
assessment body which assess and certifies products for use in the food processing industry so as to minimise health risks
to the general public.
NSF registration certificates are available on the Wurth website under the “products” tab, under the link “Chemical
Certificates”.
NSF Ratings
H1
May make incidental contact with foodstuffs
H2
May be used in a food production environment but must not make contact with foodstuffs
K1
Can be used as a cleaner containing solvents
A1
Aqueous basic cleaner
A7
Aqueous cleaner for metal
P1
Various applications
SEE OUR FULL RANGE OF COMPLIANCE
CERTIFICATES ONLINE AT WWW.WURTH.COM.AU
Page 2
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Bond + Seal Power
Heavy-duty, elastic hybrid construction adhesive with high initial adhesion strength and high
UV-resistance.
•
•
•
•
•
•
•
•
•
•
•
•
NSF (P1)-registered (No. 136996).
HACCP Certified
Excellent adhesive range.
Minimally elastic.
High initial strength.
Suitable for painting over.
UV-resistant.
Non-corrosive.
Nearly odourless.
VOC- and solvent-free.
Isocyanate-, PVC- and silicone-free.
Safety product.
Colour
White
Black
Contents
300 ml
300 ml
Art. No.
0893 235 1
0893 235 3
Areas of application:
For dynamically loaded structural ­connections and
seam and joint sealing in autobody, vehicle and
caravan construction, railway car and container
construction, metal and equipment construction, in
air conditioning and ventilation duct construction, in
the foodstuff industry and many more.
Catalogue Page 05 4215
Pack Qty.
1/12
HACCP SSZ Certified: PE-717-WA-01.
Meets the requirement of NSF/ANSI
Standard 61 - Drinking Water System
Components.
Page 3
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Multi Plus
Synthetic, physiologically safe multi-function spray with high-end properties for
universal use.
A product for a wide spectrum of applications.
· Rust penetrating agent with creeping properties.
· Wear reducing lubricant.
· Good long term corrosion protection.
· Reliable release agent.
·Suitable for use in physiologically and ecologically sensitive areas.
· Low danger potential.
· Safe working.
Colourless, non discolouring.
· Can be used on bright backgrounds.
·No discolouration in the case of occasional contact with the product.
Free from white oil / mineral oil.
Good material compatibility.
Resin-, acid- and silicone-free.
Art. No. 0893 056
Catalogue Page 04 0522
Page 4
HACCP FZS Certified: PE-715-WA-01.
NSF H1 registered (No: 135925),
corresponds to the requirements of
USDA 1998 H1.
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Multi-Purpose Grease III
Can be used in areas in which food is processed or stored.
In this context, the product may come into contact with foodstuffs for technical reasons.
Multi-Purpose Grease III physiologically safe, colourless grease with multifunctional additive combination.
•
•
•
•
•
Good adhesive properties.
Stable against working and oxidation-resistant.
Supports the quality of the seal.
Dust and water-repellent.
Resin, acid and silicone-free.
HACCP FZS Certified: PE-715-WA-01.
SF H1 registered (No: 135924
N
& 135928), corresponds to the
requirements of USDA 1998 H1.
Art. No. 0893 107 002
Catalogue Page 04 2505
Page 5
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Foodstuff HHS
Watertight, synthetic adhesive lubricant with creeping action.
Can be used in areas in which food is processed or stored.
In this context, the product may come into incidental contact with food for technical reasons.
• Very good creeping action.
• Good adhesive properties.
• Provides long-lasting protection against corrosion,
especially of non-ferrous metals.
• Water resistant.
• Resin and acid-free.
• Silicone and AOX-free.
HACCP FZS Certified: PE-715-WA-01.
NSF H1 registered (No: 140816),
corresponds to the requirements of
H1, 1998.
Art. No. 0893 107 6
Catalogue Page 04 0531
Page 6
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Rust Off Crafty
Synthetic, biodegradable high-performance rust remover with food registration.
•
•
•
•
•
•
Contains synthetic oil.
Extreme capillary activity.
Excellent material compatibility.
Optimum corrosion protection thanks to corrosion protection a
­ dditives.
Resin and acid-free.
Silicone-free.
HACCP SSZ Certified: PE-717-WA-01.
NSF H2 registered, (No: 124179)
corresponds to the requirements of
H1, 1998.
Art. No. 0893 130
Catalogue Page 04 0551
Page 7
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
WURTH AUSTRALIA'S
DOS RANGE
The benefits of the DOS
System
Accessibility
Ask to see
my hand
sample!
DOS Assortment
Bottles stored in the practical storage holder mean
the right product is easy to find and always within
reach.
The storage holder may be set up anywhere, such
as a work bench, on the wall or a tool trolley.
DOS SYSTEM APPLICATION GUIDE
Motor
Sealant
A revolutionary system for one handed
application of sealants.
Product
Motor
Sealant
Art. No.
0893 260 100
Art. No.
0893 270 050
Motor Sealant is a
transparent, red, viscous
fluid sealant which bonds
to all metals. Suitable for
all engine gasket surfaces
since no residue remains.
All sealed surfaces are
sealed against thermal,
chemical and mechanical
stress. Sealed surfaces
can be easily separated.
Resistant to petrol, diesel,
oil, grease, water, steam,
frost and all normal
chemicals.
*Only suitable for use on
engine components.
For securing and
sealing of screws,
bolts, nuts, threaded
inserts and threaded
plugs. Restricts
loosening by impact
or vibration.
Properties:
A product that adheres
to most surfaces. It is
permanently pliable and
resistant to vibration. As
the product only has to
applied thinly to one side
it is very economical. It
can also be used as a
replacement for solid
gaskets.
Universal product
A commonly used
for all threads and
product, providing
cylindrical parts which excellent protection
would not normally be against oil, water and
released again.
heat.
Can be released with
special tools and/or
heat.
For securing and
sealing of screws,
bolts, nuts, threaded
inserts and threaded
plugs. Restricts
loosening by impact
or vibration.
Will harden even at
very low temperature.
Can be released with
normal tools.
Flange
Sealant
Pipe
Sealant
Flange
Sealant
Hydraulic
Sealant
Art. No.
0893 574 050
Art. No.
0893 577 050
Art. No.
0893 545 050
For securing bearings, For sealing precision
machined flanges
gear wheels, bolts,
and surfaces with
screws, shafts and
gaps to max. 0.3mm.
auxiliary joints.
Replacement for solid
Prevents rattles due to gaskets.
load change.
For sealing precision
machined flanges
and surfaces with
gaps to max. 0.5mm.
Replacement for solid
gaskets.
Gas & fluid proof
sealant for all pipe
threads and fittings up
to R3”.
For sealing pneumatic
and hydraulic
connections under
high loads up to the
bursting pressure of
the hose.
Particularly suitable
where a good
coverage is essential
e.g. with complicated
castings, narrow links
and smooth surfaces.
Particularly suitable
where a good
coverage is essential
e.g. with complicated
castings, narrow links
and smooth surfaces.
Excellent resistance
to chemicals, gas,
liquids, fuels and
hydraulic fluids.
Excellent resistance
to chemicals, gas,
liquids, fuels and
hydraulic fluids.
An easily detached
low adhesion joint,
which is particularly
flexible.
An easily detached
low adhesion joint,
which is particularly
flexible.
Art. No.
0893 603 050
Universal product for
heavily stressed joints.
High tear-resistance.
Can be used in small
spaces between
joined surfaces.
Excellent resistance to
media.
Flange
Sealant
Green
Art. No.
0893 573 050
Flange
Sealant
Orange
Fast curing even at
low temperatures.
Can be applied on
slightly oily surfaces,
no need for time
consuming degreasing
of threads.
Highly suitable for
larger and rougher
machined surfaces.
Chemical Basis:
Colour:
Viscosity in mPas:
Stability in storage:
Epoxy resin
Transparent Red
5,000 – 13,200
1 year
Dimethylacrylate
Green
400 - 600
1 year
Dimethylacrylate
Fluorescent Blue
5,000 - 7,000
1 year
Hydraulic
Sealant
Pipe
Sealant
Art. No.
0893 243 050
Application:
Art. No. 0893 964
Catalogue Page 05 1501
Bearing
Retainer
Thread
Locker
Thread
Locker
Thread Locker Thread Locker
Bearing
High Strength
Medium
Retainer
Strength
High Strength
Dimethylacrylate
Dimethylacrylate
Green
Fluorescent Green
100 - 150
40,000 - 60,000
1 year
1 year
Dimethylacrylate
Fluorescent Orange
35,000 - 100,000
1 year
Dimethylacrylate
Fluorescent Yellow
20,000 - 80,000
1 year
Dimethylacrylate
Violet
1,500 - 2,000
1 year
Full strength at 25ºC:
+80oC=6hrs, +180oC=5hrs
6 hours
3 hours
6 - 24 hours
6 - 24 hours
6 - 24 hours
3 hours
12 - 24 hours
Break loose resistance:
–
>30Nm
21Nm
–
8 - 12Nm
17 - 22Nm
15 - 20Nm
2-3Nm
Operating pressure:
700 bar (10,290psi)
–
–
–
–
–
–
–
–
–
2 - 4 N/mm2
8 - 10 N/mm2
300 bar (4410psi)
–
200 bar (2940psi)
–
Tensile strength:
Temp. resistance:
-50oC to +280oC
-55oC to +150oC
-55oC to +150oC
-55oC to +150oC
-55oC to +150oC
-55oC to +150oC
-55oC to +150oC
-55oC to +150oC
Max. gap bridging:
approx 2mm
up to 0.15mm
up to 0.25mm
up to 0.15mm
up to 0.3mm
up to 0.5mm
0.5mm
0.15mm
M12
–
–
R3” (M80)
–
0.3mm
0.5mm
–
Max. thread joint:
–
M20
M36
Max. glue gap:
approx 2mm
–
–
Instructions for use:
Clean add dry threads, applying a small amount
Clean and dry the surfaces
to be sealed.
of Thread Lock. Tighten to specifications.
Apply a thin layer of the
material on one side and
leave for 5-20min to air, then
join two surfaces. Thermal
hardening possible
from +60oC. It is relatively
easy to separate the joined
parts if necessary.
• Kerosene
• Diesel
• Engine oil
• Alcohols
• Jet Fuel
• Oils
Clean and dry all surfaces to be sealed with a suitable solvent (ie. Brake Cleaner - 0890 108 7).
Apply a thin layer of Sealant to one side only and assemble parts immediately.
R3/4”
–
Apply a small amount
of Hydraulic Sealant to
threads and tighten to
specifications.
RESISTANCE TABLE FOR DOS-SYSTEM
• Formic Acids
• Aviation Spirit
• Xilene
Article No. 0893 964 001/ Job No. 391110 - AUS/Revised/Reprint: 2/11
• Ethelacetate
• Frost protection
• Steam
• Acetone
• Gear oil
• Coolants
• Petrol
• Heating oil
• Brake Fluid
• Alkaline Solutions • Phosphoric acid (10%)
• Hydraulic oil
• Solvents (chlorinated)
Wurth Australia Pty. Ltd. - T: 1300 65 77 65 - Contact us today
Practicality
The seven most important sealants for every work
shop are included in the set.
The storage holder may be filled according to
each customer’s personal needs.
Easy To Use
The revolutionary "dosage lid" allows accurate
application of product with no overflow.
Each bottle can be operated easily with one
hand.
Because the bottles are stored lid-down in the
holder, the product is always ready to use.
Ensures that each bottle is completely used up.
DOS Range reference chart available!
Art. No. 0893 964 001
Product Data
Hydraulic
Sealant
Thread Locker
High Strength
Thread Locker
Medium
Strength
Bearing Retainer
High Strength
Flange Sealant
Green
Flange Sealant
Orange
Pipe Sealant
Motor Sealant
Art. No.
0893 545 050
Art. No.
0893 270 050
Art. No.
0893 243 050
Art. No.
0893 603 050
Art. No.
0893 573 050
Art. No.
0893 574 050
Art. No.
0893 577 050
Art. No.
0893 260 100
For sealing pneumatic
and hydraulic
connections under high
loads up to the bursting
pressure of the hose.
For securing and sealing of screws, bolts, nuts,
threaded inserts and threaded plugs. Restricts
loosening by impact or vibration.
For securing bearings, gear
wheels, bolts, screws, shafts
and auxiliary joints. Prevents
rattles due to load change.
For sealing precision
machined flanges
and surfaces with
gaps to max. 0.3mm.
Replacement for solid
gaskets.
For sealing precision
Gas & fluid proof
sealant for all pipe
threads and fittings up
to R3”.
Motor Sealant is a
transparent, red, viscous fluid
sealant which bonds to all
metals. Suitable for all engine
gasket surfaces since no
residue remains. All sealed
surfaces are sealed against
thermal, chemical and
mechanical stress. Sealed
surfaces can be easily
separated. Resistant to petrol,
diesel, oil, grease, water,
steam, frost and all normal
chemicals.
*Only suitable for use on engine components.
Page 8
machined flanges and
surfaces with gaps to
max. 0.5mm.
Replacement for solid
gaskets.
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
DOS Thread Lock - Medium Strength, 50 g
Screw retaining and sealing compound Removable.
• Provides medium strength ­connections.
• Curing is assured even on untreated parts.
• Can also be applied to stainless steel
and passive surfaces.
• Outstanding resistance to chemicals and heat.
• Prevents loosening caused by mechanical forces eg.
vibrations or impact.
HACCP SSZ Certified: PE-717-WA-01.
Meets the requirement of NSF/ANSI
Standard 61 - Drinking Water System
Components.
Art. No. 0893 243 050
Catalogue Page 05 1520
DOS Pipe Sealant - 50g
Gas and fluid proof sealing of all pipe threads and fittings up to 3”.
• Seals immediately under low pressure loads.
- Pipes can be pressurised ­immediately up to
approximately 5 bar, after final curing up to
300 bar.
• Also cures at temperatures below 0°C.
• High resistance to chemicals.
NSF registered under ANSI Standard 61 Drinking Water System Components.
Resistant to chemicals and gases: see
resistance list.
Art. No. 0893 577 050
Catalogue Page 05 1520
DOS Thread Lock - High Strength, 50 g
Screw retaining and sealing compound. For securing and sealing of screws, studs,
bolts, nuts, threaded ­inserts and plugs, which are not required to be removed
under normal circumstances.
• Particularly well suited for heavy duty screw
connections.
• Difficult to separate.
• Outstanding resistance to chemicals and heat.
• Prevents loosening caused by, for instance,
vibrations or impact.
HACCP SSZ Certified: PE-717-WA-01.
Art. No. 0893 270 050
Catalogue Page 05 1507
Meets the requirement of NSF/ANSI
Standard 61 - Drinking Water System
Components.
Page 9
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
PRECISION
DRILLING
Page 10
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Visit www.wurth.com.au and
view the Bright Drill Bit product
demonstration, or use our handy
QR code...
HSS Twist Drill Premium Bright Assortment –
Premium Bright - Metric
Premium split point HSS Bright Finish drill bits. A truly
universal drill bit for all your most demanding applications
• Fully precision ground from premium M2 high speed material.
• Drill bits undergo high temperature heat treatment creating a hard
wearing multipurpose drill.
• The 118 degree split point provides for a self-centring tip. This reduces
drill ‘wander’ and allows for precise hole placement, particularly when
hand drilling.
• The split point and precision machining also creates smaller chips while
drilling, offering better swarf extraction and a safer work environment.
• The 118 degree angle is the optimum angle for high drilling
performance in a variety of materials
Contents
Art. No.
10 each dia. 1.0 - 6.0 x 0.5mm
5 each dia. 6.5 - 10.5 x 0.5mm = 155
pieces. (ORSY 100 Case)
0624 090 005
Contents
Art. No.
25 pieces from dia.
1.0 - 13.0mm at 0.5 mm intervals.
19 pieces from dia.
1.0 - 10.0mm at 0.5mm intervals.
0624 090 004
0624 090 001
Catalogue Page 02 0531
Page 11
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
The newly-designed drill point
sets new standards for the
drilling properties of bits.
①
②
HSS Twist Drill Bits - Imperial
• High speed steel.
•Made to ANSI standard B94-11.
•Point angle: 135o.
•Split point.
Description:
The drills are black finish. This finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface helps to keep
lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life. Black finish
tools are generally recommended for ferrous applications where the oxide
layer aids chip flow and heat dissipation.
The drills are made from M2 grade High Speed Steel. The point angle of
the drills is 135o. This point angle allows more effective drilling of harder
materials, especially in deep hole applications. They are split pointed,
which are self centering and require less thrust than conventionally pointed
drills.
Contents
Art. No.
29 pieces sizes 1/16” - 1/2”
8443 980 001
Material HSS, 135º split point set
135 pieces sizes 1/16” - 3/8”
Material HSS,135º split point assort- 8443 980 002
ment
Catalogue Page 02 0561
Page 12
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
HSS DIN 340 Type RN Twist
Drill Bits
Assembly drill for deep drilling in steel,
tip angle 130o.
DIN 340, Long Reach.
• S
uitable for wood, plastic/composites, mild
and cast steel (alloy and non alloy), grey cast
iron, tempered castings, sintered materials,
graphite and nodular iron.
• Base material: High Speed Steel.
• Point angle: 118o.
• Straight cylindrical shank.
• Right hand cutting.
Long tool life
Thanks to HC (High Speed Cutting) grinding and
the related precise cutting geometry, a constant
drilled-hole quality is ensured with simultaneous
high precision and a long tool life.
Steel
Dia.
mm
2.5
3.0
3.5
4.0
4.5
4.8
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
Page 13
Total Length
mm
95
100
112
119
126
132
132
139
139
148
156
156
165
165
175
184
Chip Flute Length
mm
62
66
73
78
82
87
87
91
91
97
102
102
109
109
115
121
Art. No.
0624 200 250
0624 200 300
0624 200 350
0624 200 400
0624 200 450
0624 200 480
0624 200 500
0624 200 550
0624 200 600
0624 200 650
0624 200 700
0624 200 750
0624 200 800
0624 200 850
0624 200 900
0624 201 000
Properties:
Tool life:
Drilling speed:
Drilled-hole quality:
Versatility:
Drilling behaviour:
Drilling depth:
●●○○
●●○○
●●○○
●●○○
●●○○
10 x drill bit dia.
Note:
For drill bit/material assignments,
see overview tables.
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Sabre Saw Blades
Special Blades for Special Areas of Application:
Heavy Duty for solid, thick workpieces of 3-10 mm. Ideal for more demanding applications, e. g. thick metal sheets and pipes.
D
emolition for demolition and rescue work, material thickness 4-12 mm. Ideal for working with a pipe bracket. A right-angled cut is ensured by the
extremely thick blade thickness of 1.6 mm.
**
**
*
Wood
Metal
Thickness in mm
Overall length
in mm and inch
Pack
Qty.
0615 815 0301=5
0608 030 21 1=5
0608 030 22 1=5
0608 030 25 1=5
0608 030 19 1=5
0615 830 0401=5
0615 910 0101=5
0615 915 0101=5
0615 922 8141=5
0615 922 8181=5
Art. No.
Tooth spacing
in mm and inch
*** Quality
Material
Multi Blade with progressive tooth pitch for thin and thick materials for particularly fast cutting.
3.6-5.1 150 1.25
5-7 tpi
6”
4.0
3051.25
6 tpi
12”
4.0
1501.25
6 tpi
6”
5.0
2401.50
5 tpi
10”
8.5
1501.25
3 tpi
6”
3.6/5.1 305 1.25
5/7 tpi 12”
1.0
100 0.9
24 tpi
4”
1.0
150 0.9
24 tpi
6”
1.4
228 0.9
18 tpi
9”
1.8
228 0.9
14 tpi
9”
Catalogue Page 03 0528
Page 14
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Important Note
Constr./ Stainless
Universalsteel
***High performance Saw Blade for
extreme applica­tions, high cutting performance and long service life.
**Very good blade for ­more
demanding applications.
*Good standard blade for
­conventional applica­tions.
***
***
Stainless Construction
Pack
Qty.
0615 715 2421=5
4.3
6 tpi
0615 720 3321=5
2.1-3.2
8-12 tpi
0615 720 3461=5
2.2-4.6
6-12 tpi
0615 722 831 1=2
Diamond
0615 722 8421=5
4.3
6 tpi
0615 911 6141=3
1.4
18 tpi
Art. No.
Thickness in mm
Quality
Material
Star System:
Three application-optimised ­quality stages.
•Exactly the ­right strip saw blade for every
application.
Optimum combination of material, tooth pitch
and saw blade.
•Excellent cut ­results.
­ ooling using drilling and cutting oil, extends the
C
service life of metal sabre saw ­blades.
With stainless steel sabre saw blades,
cool, reduce number of strokes and
switch off pendulum.
Overall length
in mm and inch
Colour Code System:
Using the 4 very different ­colours you will
always find the ­right sabre saw blade for your
application.
Tooth spacing
in mm and inch
Wood
Metal
1501.25
6”
2001.25
8”
2001.25
8”
228 1.25
9”
2281.6
9”
116.51.25
4,5”
Catalogue Page 03 0533
Page 15
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
H
Pe Cu igh
r f tti
or ng
m
an
ce
Hacksaw Blades HSS Bi-Metal
A Hacksaw Blade offering higher
cutting capacity and flexibility.
•Special steels. High-alloy high speed steel
at the toothed edge, tough tool steel for the
back.
•Most up-to-date manufacturing techniques
guarantee excellent quality and precision. For example, electron beams in a high vacuum
are used to weld joints.
•The toothed edges are made of fully
hardened steel so their cutting capacities and
service lives are unsurpassable.
•You work with one saw blade more quickly,
longer and thus more economically.
Catalogue Page 03 0501
Material
Thickness mm
over 2
up to 2
No. of
Teeth
24
32
Length
mm
300
300
Width
mm
13
13
Thickness
mm
0.65
0.65
Art.No.
Pack Qty.
0603 300 13
0603 300 133
10
Hacksaw Frame - 400mm
Sturdy frame for Wurth hacksaw
blades.
•Aluminium frame with comfort grip handle.
•Square steel upper tube, incorporating blade
storage.
•Suitable for flush cutting due to dual mounting
angles.
Art. No. 0714 64 019
Catalogue Page 12 2501
Page 16
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Cut + Cool Cutting &
Drilling Oil Perfect - 5L
Art. No. 0893 050 009
Cut + Cool Cutting & Drilling Oil/Paste Perfect
High performance cutting oil for heavy duty machining
and high cutting speeds.
•
Safe, efficient use.
- Excellent results and safety for all materials and applications.
- Longer tool life.
- Greater corrosion protection.
- Can be welded without p
­ rior cleaning when small quantities are
used.
• Can be used as minimal quantity ­lubricant.
Cut + Cool Cutting & Drilling - Top performance, excellent results thanks to specially matched
­components.
Oil Perfect - 400ml
• Paste for heavy-duty machining.
Art. No. 0893 050 008
- Easy machining of hard steels with maximum strength.
- Horizontal and overhead ­applications can be carried ­out easily.
Description/Container
Aerosol
Container
Can
Tap for 5L Container
Cut + Cool
Paste Perfect - 500g
Art. No. 0893 050 010
Page 17
Contents
400ml
5L
500g
-
Art. No.
0893 050 008
0893 050 009
0893 050 010
0891 302 01
Pack Qty.
6
1
1/6
1
Catalogue Page 04 2001
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Cut + Cool Cutting & Drilling Oil Eco
Cut + Cool Cutting &
Drilling Oil Eco - 5L
Art. No. 0893 050 012
Cut + Cool Cutting &
Drilling Oil Eco - 400ml
Art. No. 0893 050 011
Biodegradable cutting oil with Eco-Stop.
• Eco-Stop technology.
- Up to 2,500 applications ­possible due to predefined quantity per
valve actuation.
-M
inimal smoking.
• Easy to use.
-N
o cleaning of metals prior to assembly or further treatment (e.g.
welding) with low use concentrations required.
• Neutral behaviour.
-C
ontact with sensitive materials (e.g. marble, plastic, electr.
components) possible.
- Odour-free
• Cutting gel for extreme loads.
-O
ptimum adhesion on ­machining workpiece and tool.
- High, long-term lubricating action without repeated application.
Description
Aerosol
Container
Tap for 5L Container
Content
400ml
5L
-
Art. No.
0893 050 011
0893 050 012
0891 302 01
Pack Qty.
6
1
1
Thanks to adhesion
of oil particles on
machining tool, an
optimum, long-­term
lubricating action is
achieved.
Ordinary Oil
Cutting Oil Eco
Catalogue Page 04 2002
Page 18
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Cut + Cool Cutting & Drilling Oil
Cut + Cool Cutting &
Drilling Oil - 5L
Art. No. 0893 050 1
Multi-cutting Oil for light to
medium heavy machining work.
• For universal use.
•Provides instant cooling on application.
- ­Protects tools.
- Prevents welding of small material particles to cutting edge.
• Good creeping qualities.
- Provides maximum penetration.
• Excellent corrosion protection.
- Provides lasting protection against further formation of rust and
corrosion.
Cut + Cool Cutting & Drilling - ­No re-treatment or preservation necessary.
Oil - 400ml
Art. No. 0893 050 004
Applications:
For drilling, thread tapping, thread forming, turning, counter-­sinking,
reaming and sawing. Optimal for stainless steel, but also for high-alloy
steel, ­construction steel, non-ferrous and precious metal. Can also be used
as a preservative agent for semi-finished and finished parts and machine
parts, and as gun oil.
Note:
Free of silicone, chlorine, resin and acid. Free of paint-wetting substances.
Description/Container
Aerosol
Container
Contents
400ml
5L
Art. No.
0893 050 004
0893 050 1
Pack Qty.
1/12
1
Catalogue Page 04 2007
Page 19
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
POWERFUL
ADHESIVES
Page 20
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Patented dosage cap - with 3 different dose settings.
Won't dry out and no need to cut.
Closed position,
totally airtight
Open position,
three settings
Superfast Glue, 30g
Superfast Glue, 20g
Now also in the Innovative EASY PEN
design.
• Even easier, more practical handling.
• Fits ergonomically in your hand.
•The base of Easy Pen provides stable,
secure support.
•The lever permits easy, problem-free use
without great force.
• High-precision work possible.
• Large 30g container.
Fast-Acting Cyanoacrylate Adhesive with
Measuring System.
•For extremely fast connection of any combination
of rubber, plastic and metal parts to one another.
• Patented special cap.
• Bonds in seconds.
•Solvent-free.
Art. No. 0893 090 030
Catalogue Page 05 4007
Art. No. 0893 09
Catalogue Page 05 4007
SKG - Super Fast Gel Adhesive, 20g
Cyan acrylate assembly glue, gel-type.
• Stable consistency.
• Quick curing.
• Universal use.
• Clean application .
Art. No. 0893 403 1
Catalogue Page 05 4001
Page 21
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Adhesives that suit the marine
industry and caravan trades...
Rubber Glue, 180g
• For adhesion of rubber profiles onto
bare, primed or painted metal.
• Temperature resistant up to
approximately 100 °C.
Great for
Rubber Seals!
Art. No. 0890 100 015
Catalogue Page 05 4121
Power Spray Glue Plus, 400ml
Contact adhesive with high immediate adhesive strength
and high heat resistance.
•
•
•
•
Very high heat resistance up to 110°C
Fast-drying
Two-position adjustable spray head
Transparent hardening
Art. No. 0890 100 064
Catalogue Page 05 4122
Universal Adhesive Extra
Neoprene basis contact adhesive.
Apply Universal Adhesive evenly
on both sides.
Page 22
•Tolual-free.
• Broad adhesion range.
• Easily spreadable.
• Resistant to ageing.
• Excellent elasticity.
• High resistance.
Description
Art. No.
Contents
Universal Adhesive
185ml / 163g
Extra - Tube
Universal Adhesive
730ml / 650g
Extra - Can
0893 100 022
0893 100 023
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Aluminium Polish
For cleaning and polishing of aluminium surfaces to restore
the shine.
• Paste-like polish.
• Contains polishing additives with grease-restoring properties.
• Only a little polish required.
Technical Data
Basic Ingredients
Carbon dioxide/water
emulsion
Colour
Dark Grey
Density g/ml
1.0
Viscosity
1500 mPas
pH Value
8.5
Shelf Life
12 months, keep cool
and dry
Art. No. 0893 121 301
Catalogue Page 04 4513
Page 23
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
REPLAST EASY FAST & EASY
REPAIR OF
PLASTIC PARTS
Easy to follow steps:
1.Spray Wurth Plastic Cleaner on surface to be
repaired.
2.Sand down the front and rear of this area using
sandpaper.
3.Apply a thin layer of Wurth Plastic Primer and
allow to air for 2 minutes.
4.Cut the Wurth self-adhesive Reinforcement Tape
to the size of the repair.
5.Use the Replast Easy Plastic Adhesive with the
Positive Mixer on the Wurth Reinforcement Tape
and apply to the area.
6.The Wurth Contour Film, when applied over the
area, with smooth it out, or if placed behind the
area to be repaired with keep the adhesive from
oozing through.
7.After the Replast Easy Plastic Adhesive has
hardened, sand the surface with Wurth
sandpaper.
Page 24
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Replast Easy
Areas of Application:
Passenger Vehicles:
Spoilers, radiator grill, panelling clips, bumpers, brackets on headlamps
and radiator, etc.
Trucks and Buses:
Skirts, bumpers, air intake duct, wheel arches, etc.
Motorbikes:
All panelling.
Complete system for easy and professional repairs of plastic
parts.
•
•
•
•
An adhesive for almost all types of plastic.*
Special positive mixer.
Cures quickly.
Solvent-free adhesive.
Description
Contents Art. No.
Plastic Cleaner
500ml
0893 500 1
Plastic Primer
200ml
0893 500 2
Fast 2C-Plastic Adhesive
50ml
0893 500 3
Reinforcement Tape
3.5ml
0893 500 6
Contour Film
3.5ml
0893 500 7
Positive Mixer
-
0891 486
Application Gun
(Metal - Heavy Duty)
-
0891 893 485
Catalogue Page 05 4061
Page 25
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
EFI Hose Clamps
Zebra Hose Clamps, 9mm
• With anti-pinch liner.
•Retains circular form, even for small diameters, thus ensuring a good
seal.
• Zinc plated.
•For securing rubber and plastic hoses, eg. vacuum and fuel hose
connections.
• Slotted screw.
Off-set head style, SW7mm.
Advantage:
Asymmetrical body. Even distribution of force. Clamp head does not tilt
away during tightening.
Smooth strap interior with rounded edges to prevent hose
damage.
Band Width
mm
7
9
15
Page 26
Diameter
mm
8
9
10
11
12
13
14
15
16
17
18
22
25
Art. No.
0540 8 7
0540 9 9
0540 10 9
0540 11 9
0540 12 9
0540 13 9
0540 14 9
0540 15 9
0540 16 9
0540 17 9
0540 18 9
0540 22 9
0540 25 15
Clamping Recommended Hose
Clamp Set
Range mm Tightening
Contents
Torque Nm
8 - 12*
3.5
10 - 16*
8 - 16
20
2 +0.5
12 - 22
10
16 - 27
20
20 - 32
10
25 - 40
30 - 45
3 +0.5
32 - 50
40 - 60
50 - 70
10
60 - 80
70 - 90
Art. No.
0539 28 12
0539 210 16
0539 18 16
0539 112 22
0539 116 27
0539 120 32
0539 125 40
0539 130 45
0539 132 50
0539 140 60
0539 150 70
0539 160 80
0539 170 90
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Zebra Hose Clamps, 12mm
Asymmetrical lock prevents tilting of
lock when tightening the tube
clamp. Fabric insert and tube
clamp are not damaged.
Short saddle, without welds
and rivets fits snugly within the
loop inside, resulting in uniform
contact pressure over the whole
circumference.
The outer edge (support) directs the
end of the loop away from the head
of the screw during tightening and
makes it fit the clamp snugly.
Embossed loop and the rounded
elevated edges exclude any
damage to the tube surface.
•Band and body stainless steel 1.4016.
•Screw steel galvanised and passivated.
•SW7mm
Clamping Range
Art. No.
16 - 27
20 - 32
25 - 40
32 - 50
40 - 60
50 - 70
60 - 80
70 - 90
80 - 100
90 - 110
100 - 120
110 - 130
130 - 150
140 - 160
0549 216 27
0549 220 32
0549 225 40
0549 235 50
0549 240 60
0549 250 70
0549 260 80
0549 270 90
0549 280 100
0549 290 110
0549 200 120
0549 210 130
0549 230 150
0549 240 160
Zebra Hose Clamp Set, 9mm
9mm Band Width.
Description
Contents
10 sizes from 8 - 16 to 70 90mm =120 clamps
Zebra Hose
1 Zebra Screwdriver with
Clamp Set,
Flexible Shaft,
9mm, SW7mm.
Art. No. 0613 286 07
1 Wall Mounting Set.
Art. No.
Pack
Qty.
0539 120 7 1
Catalogue Page 06 0598
Zebra Hose Clamp Set, 12mm
12mm Band Width.
Art. No.
Description
Contents
ZEBRA Hose
Clamp Set
12mm,
SW7mm.
11 Sizes from 16 - 36 to 100 120mm = 110 pieces.
1 Zebra Flexible Screwdriver
0549 210
SW7 (Art. No. 0613 286 07)
1 Wall Mounting Set
Pack
Qty.
1
Catalogue Page 06 0603
Page 27
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Pipe Clamps
DIN 1569
With synthetic rubber insert (RSGM).
Material: Zinc plated steel strip, Polychloropene insert.
* Supplied without screws and
nuts.
Dø
6
8
9
10
12
15
25
6
8
10
12
15
18
20
22
25
30
35
8
15
18
20
25
30
40
25
50
Page 28
B
d1ø
Clip Width
h1
For Screw
D
12
M5
8.0 +
15
M6
11.2 +
2
D
2
D
2
20
M8
14.5 +
25
M 10
17.5 +
D
2
Art. No.
0542 6 12
0542 8 12
0542 9 12
0542 10 12
0542 12 12
0542 15 12
0542 25 12
0542 6 15
0542 8 15
0542 10 15
0542 12 15
0542 15 15
0542 18 15
0542 20 15
0542 22 15
0542 25 15
0542 30 15
0542 35 15
0542 8 20
0542 15 20
0542 18 20
0542 20 20
0542 25 20
0542 30 20
0542 40 20
0542 25 25
0542 50 25
•For fixing pipes, cables, hoses eg: on body
work or machine base plates.
• Will not squash hose.
• Has vibration damping properties.
• Reliable material with long life corrosion
resistance due to zinc plate.
•Reinforced clip ends with properly matched
clip material, prevent tearing or stretching at
the fixing point (eg: where pipes are liable to impact).
•Synthetic rubber insert within the clip gives an
elastic mounting and prevents water collection
under the clip.
Catalogue Page 06 0541
Properties of the Insert
Tensile Strength kg/cm2
100
Stretch Limit
200%
Shore Hardness A
70 + 5
Temperature °C
- 35°C to 120°C
Abrasion Resistance
Good
Weather and Ozone
Very Good
Resistance
Ageing and Sunlight
Very Good
Resistance
Resistant to Petrol, Oil, Fats, Alcohol, Acids and
Alkalies.
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Contact OL - Oxidation Solvent
• Oxidation-dissolving cleaning agent.
• Does not attack most structural materials.
• Halogen-free.
•Contact OL vapours must have completely dissipated before the electrical system is switched
back on.
Wash
•Special spray wash for contacts and electrical
components.
•Does not attack plastics and other common
materials.
•Contact SW must be completely dry before
the electrical system is switched back on.
Art. No. 0893 60
Catalogue Page 07 0501
Art. No. 0893 65
Catalogue Page 07 0501
Contact OS - Oxidation
Contact SL - Transparent
Protection
Protective Varnish
•
•
•
•
Anti-corrosion agent.
Excellent lubricant for fine drive gear units.
Removes dirt, resin, oil and abraded metal.
Acid-free, does not resinify.
Art. No. 0893 61
Catalogue Page 07 0502
Page 29
Contact SW - Special Spray
•Prevents and remedies short circuits in coils
and transformers.
•Prevents short circuits in the high and ­low
voltage ranges.
•Bonds to metals such as copper, brass, steel,
chrome and aluminum.
• Suitable for electronic circuit boards.
Art. No. 0893 70
Catalogue Page 07 0502
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Battery Terminal Protector
Durable protection for b
­ attery terminals. ­Resistant to variations in temperature.
• Durable, temperature resistant film.
- Protects battery terminals, ­charging clamps and electrical connectors
against corrosion and ­climatic effects as well as ­battery acid.
- Prevents transition resistance and voltage drop.
• Colour: Blue
Catalogue Page 07 0531
Contents
150ml
250g
Art. No.
0890 104
0890 104 10
Battery Terminal Grease
Protects battery terminals and clamps against oxidation.
•Durable, temperature resistant coating for battery terminals and
clamps.
- Protects battery terminals, ­charging clamps and electrical connectors
against corrosion and ­climatic effects as well as ­battery acid.
- Prevents transition resistance and voltage drop.
• Colour: Red
Catalogue Page 07 0531
Page 30
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
ASK YOUR SALES REPRESENTATIVE ABOUT OUR
LARGE RANGE OF QUALITY SAFETY PRODUCTS!
PROTEGO® Safety Glasses.
Fashionable design.
• Composite-wrapped on arms and nose piece for maximum wearing
comfort.
• Adjustable formation nose piece to suit all face types.
• Scratch resistant, Polycarbonate lens.
• New anti-fog coating.
Art. No. 0899 107 130 (Black)
Art. No. 0899 107 131 (White)
Catalogue Page 09 0501
Andromeda Full Vision Goggle
Features:
• Innovative two-component technology for reliable protection and
maximum wearing comfort.
• Large-volume; excellently suited for users who wear glasses.
• Panorama field of view.
• First-class eye climate thanks to optimum ventilation.
Description
Art. No.
Andromeda Full-Vision Goggle
Replacement Lens
0899 102 110
0899 102 111
Catalogue Page 09 0502
Alpha Goggle
Features:
• Lightweight.
• Polycarbonate lens.
• Adjustable elastic strap for comfortable fit.
• Medium impact protection.
• Hard coated.
Art. No. 0899 102 120
Catalogue Page 09 0502
Page 31
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Safety Glasses - Standard
Modern one piece wrap around design
providing side protection.
• Scratch resistant, Polycarbonate lens.
• New anti-fog coating.
• Medium impact.
Safety Glasses
Art. No.
Standard - Clear
Standard - Tinted
Standard - Amber
0899 103 120
0899 103 121
0899 103 122
Catalogue Page 09 0501
Safety Glasses - Premium
A
Premium Safety Glasses.
• Adjustable side arms, with lock (A).
• Fashionable one piece wrap around design
providing side protection.
• Nylon frames.
• Scratch resistant, Polycarbonate lens.
• New anti-fog coating.
Description
PREMIUM - Clear
PREMIUM - Tinted
PREMIUM - Amber
Art. No.
0899 103 110
0899 103 111
0899 103 112
Glass Cleaning Wipes
Convenient cleaning towelettes to keep
your glasses clean.
• Special moist cleaning towelettes for gentle
cleaning of all glasses, especially safety
glasses.
• Suitable for all glasses coatings.
• Silicone-free.
• Practical dispenser box with 100 individually
packaged moist cleaning towelettes.
Art. No. 0899 102 300
Catalogue Page 09 0502
Page 32
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
ORSY 100 – STACK • LOCK • SAFE • CUSTOMISE
ORSY 100 Stacking Cabinet
•
•
•
•
•
•
•
H
olds four Orsy 100 assortment cases.
C
entral locking - supplied with two keys.
Rigid metal, fully enclosed construction for long-life reliability.
T elescopic pull-out drawers on ball bearings.
S
tackable.
Dimensions: 410 x 315 x 260mm (W x H x D).
Assortment cases not included.
Stackable
High load bearing
capacity.
Secure stacking due to indexing lugs.
Sturdiness
Secure grip.
Modular
design.
Page 33
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
O-Rings / Imperial - 440 pcs
Contents:
Art. No. 0964 468
Catalogue Page 10 2025
Art. No.
Description
Pack Qty
0468 528
5.28 x 1.78mm
50
0468 607
6.07 x 1.78mm
50
0468 766
7.66 x 1.78mm
50
0468 925
9.25 x 1.78mm
30
0468 107 8
10.78 x 2.62mm
30
0468 123 7
12.37 x 2.62mm
30
0468 139 5
13.95 x 2.62mm
30
0468 155 4
15.54 x 2.62mm
20
0468 171 3
17.13 x 2.62mm
20
0468 187 2
18.72 x 2.62mm
20
0468 202 2
20.22 x 3.53mm
20
0468 234 0
23.40 x 3.53mm
15
0468 250 0
25.0 x 3.53mm
15
0468 265 7
26.57 x 3.53mm
15
0468 281 7
28.17 x 3.53mm
15
0468 313 4
31.34 x 3.53mm
10
0468 345 2
34.52 x 3.53mm
10
0468 361 0
36.10 x 3.53mm
10
O-Rings / Metric - 1,050 pcs
Contents:
Art. No. 0964 468 1
Catalogue Page 10 2025
Page 34
Art. No.
Description
Pack Qty
0468 003 20
3.0 x 2.0mm
100
0468 004 20
4.0 x 2.0mm
100
0468 005 20
5.0 x 2.0mm
100
0468 006 20
6.0 x 2.0mm
100
0468 007 20
7.0 x 2.0mm
100
0468 008 20
8.0 x 2.0mm
100
0468 010 20
10.0 x 2.0mm
50
0468 012 20
12.0 x 2.0mm
50
0468 010 25
10.0 x 2.5mm
50
0468 012 25
12.0 x 2.5mm
50
0468 014 25
14.0 x 2.5mm
50
0468 015 25
15.0 x 2.5mm
50
0468 017 25
17.0 x 2.5mm
25
0468 019 25
19.0 x 2.5mm
25
0468 018 30
18.0 x 3.0mm
25
0468 020 30
20.0 x 3.0mm
25
0468 022 30
22.0 x 3.0mm
25
0468 024 30
24.0 x 3.0mm
25
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
O-Rings / Metric - 330 pcs
Contents:
Art. No.
Description
Pack Qty
0468 025 30
25 x 3.0mm
50
0468 028 30
28 x 3.0mm
50
0468 030 30
30 x 3.0mm
50
0468 030 35
30 x 3.5mm
25
0468 032 35
32 x 3.5mm
10
0468 033 35
33 x 3.5mm
10
0468 034 30
34 x 3.0mm
25
0468 035 35
35 x 3.5mm
10
0468 036 30
36 x 3.0mm
25
0468 038 30
38 x 3.0mm
25
0468 040 30
40 x 3.0mm
25
0468 042 30
42 x 3.0mm
25
Art. No. 0964 468 2
Catalogue Page 10 2025
O-Rings 5 x 1m Custom - 8 pcs
Contents:
Art. No.
Description
Pack Qty
0893 09
Adhesive
1
0715 66 06
Universal Knife
1
0468 100
Cutting Template
1
0468 111 6
1.6mm diameter
1
0468 112 4
2.4mm diameter
1
0468 113 0
3.0mm diameter
1
0468 115 7
5.7mm diameter
1
0468 118 4
8.4mm diameter
1
Art. No. 0964 468 3
Catalogue Page 10 2026
Page 35
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Page 36
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
O-Rings / Imperial - 1,050 pcs
Contents:
Art. No. 0964 468 5
Catalogue Page 10 2026
Art. No.
Description
Pack Qty
0468 290
2.90 x 1.78mm
100
0468 369
3.69 x 1.78mm
100
0468 447
4.47 x 1.78mm
100
0468 528
5.28 x 1.78mm
100
0468 607
6.07 x 1.78mm
100
0468 766
7.66 x 1.78mm
100
0468 925
9.25 x 1.78mm
50
0468 919
9.19 x 2.62mm
50
0468 107 8
10.78 x 2.62mm
50
0468 123 7
12.37 x 2.62mm
50
0468 139 5
19.95 x 2.62mm
50
0468 155 4
15.54 x 2.62mm
50
0468 171 3
17.13 x 2.62mm
25
0468 187 2
18.72 x 2.62mm
25
0468 186 4
18.64 x 3.53mm
25
0468 202 2
20.22 x 3.53mm
25
0468 218 2
21.82 x 3.53mm
25
0468 234 0
23.40 x 3.53mm
25
O-Rings / Imperial - 330 pcs
Contents:
Art. No.
Description
Pack Qty
0468 250 0
25.0 x 3.53mm
50
0468 265 7
26.57 x 3.53mm
50
0468 281 7
28.17 x 3.53mm
50
0468 297 5
29.75 x 3.53mm
25
0468 313 4
31.34 x 3.53mm
25
0468 329 3
32.93 x 3.53mm
25
0468 345 2
34.52 x 3.53mm
25
0468 361 0
36.10 x 3.53mm
25
0468 377 0
37.70 x 3.53mm
25
0468 374 7
37.47 x 5.34mm
10
0468 406 5
40.65 x 5.34mm
10
0468 438 2
43.82 x 5.34mm
10
Art. No. 0964 468 6
Catalogue Page 10 2026
Page 37
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Pipe Clamps - 73 pcs
Contents:
Art. No.
Description
Pack Qty
0542 6 12
6 x 12mm
10
0542 8 12
8 x 12mm
10
0542 10 12
10 x 12mm
10
0542 12 15
12 x 15mm
5
0542 15 15
15 x 15mm
5
0542 18 15
18 x 15mm
5
0542 22 15
22 x 15mm
5
0542 25 15
25 x 15mm
5
0542 30 15
30 x 15mm
5
0542 15 20
15 x 20mm
5
0542 20 20
20 x 20mm
4
0542 25 20
25 x 20mm
4
Art. No. 0964 542
Catalogue Page
EFI Hose Clamps - 200 pcs
Contents:
Art. No.
Description
Pack Qty
0540 8 7
8mm
25
0540 9 9
9mm
25
0540 10 9
10mm
25
0540 11 9
11mm
25
0540 12 9
12mm
25
0540 13 9
13mm
25
0540 14 9
14mm
25
0540 15 9
15mm
25
Art. No. 0964 540
Catalogue Page 10 2032
Page 38
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
A WURTH AIR FLOW COMPLETE SOLUTION
WITH NO HASSLE.
High Flow Kit
The complete solution
for improving the flow
of compressed air and
the performance of
pneumatic tools.
Limited time only - Purchase
the new series 2000 high
flow kit for the same price
as series 1500
Use the Wurth High Flow Kit
to quickly and easily connect
from your compressed air
system to your pneumatic
tool.
Series 2000 Kit includes:
Description
Coupling 1/2" BSPT Male NBR
Coupling Stream-Line 8 x 12 NBR
Nipple Stream-Line 8 x 12
Nipple 1/4" BSPT Male
Straight Hose 8 x 12, 10 m Wurth+
Series 1500 Kit includes:
Art. No.
0699 100 312
0699 100 780
0699 100 880
0699 100 614
0699 942 811
Description
Coupling Stream 8 mm
Nipple Stream 8 mm
Coupling 1/2" BSPT Male
Nipple 1/4" BSPT Male
Straight Hose 8 x 12, 10 m Wurth+
Art. No.
0699 101 780
0699 101 880
0699 100 312
0699 100 614
0699 942 811
Catalogue Pages: 11 0501 - 0506
Art. No. 0988 260 153
Art. No. 0988 260 154
Using a 3/4" or 1" Impact Wrench? Consider upgrading to the 11mm hose
for up to 30% more power!
Page 39
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Visit www.wurth.com.au and
view the Wurth 2000 Series
Coupling product demonstration,
or use our handy
QR code...
Catalogue Pages: 11 0503 - 0506
Air Tool Fittings - 1500 Series
Air Coupling 1500 Series Hose Barb
L.O.A. Total ø Hex Art. No.
mm mm
mm
To suit
Hose ID ø
7.5 mm (5/16") 64.7 23.4
10 mm (3/8") 67.7 23.4
13 mm (1/2") 65.7 23.4
19
19
19
0699 126 10
0699 121 010
0699 121 310
Series 1500 Quick-Action Coupling - Streamline
To suit
L.O.A. Total ø
Hose ID ø mm
mm
Hex
mm
Art. No.
6.5
8.0
11.0
23.4
23.4
23.4
0699 101 765
0699 101 780
0699 101 711
10.0
12.0
16.0
61.6
65.7
65.6
Air Tool Fittings - 2000 Series
Series 2000 Quick-Action Coupling with Male Thread
Connection
thread R
1/4”
3/8”
1/2”
Wrench
size in
mm
20
20
22
Page 40
Length Dia. Flow
rate in
in mm in
mm l/min.
63
23 2,100
61
23 2,100
56
23 2,100
Art. No.
0699 100 314
0699 100 338
0699 100 312
Series 2000 Quick-Action Coupling with Female Thread
Connection
thread R
1/4”
3/8”
1/2”
Wrench
size in
mm
20
22
25
Length Dia. Flow
rate in
in mm in
mm l/min.
57
23 2,100
60
23 2,100
60
23 2,100
Art. No.
0699 100 214
0699 100 238
0699 100 212
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Air Tool Fittings - 2000 Series
Series 2000 Quick-Action Coupling
Hose dia. Length in Dia. in
mm
mm
in mm
(Inside)
Flow Art. No.
rate in
l/min.
9.0
9.5
13.0
2,100 0699 100 108
2,100 0699 100 110
2,100 0699 100 113
70
70
68
23
23
23
Series 2000 Quick-Action Coupling - Streamline
Hose dia. in mm Length Dia. Flow
rate in
Inside Outside in mm in
mm l/min.
6.5
10.0
64
23 2,100
8.0
12.0
68
23 2,100
11.0 16.0
68
23 2,100
Art. No.
0699 100 765
0699 100 780
0699 100 711
Catalogue Pages: 11 0503 - 0506
Page 41
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Mini Air Regulator - With Gauge
Miniature air regulator allowing the user to control the flow
of compressed air to the tool.
• Allows reduction of the operating pressure directly at the tool via an
adjusting wheel
• Necessary to achieve optimum performance with many air tools across
several applications.
• Allows for maximum life expectancy of the tool by reducing damage to
wearing parts from too much pressure.
Art. No. 0699 000 032
Catalogue Page 11 1031
In-Line Mini Mist Oiler
Mini mist oiler for lubricating pneumatic tools. Helps to
maintain optimum performance and tool life.
• New lightweight and durable design.
• To be screwed on the air inlet to maintain regular lubrication to air
power tools.
• Protects your air tools from rust and corrosion.
• See-through reservoir lets you know when oil needs replenishment.
• Oil capacity 4 ml.
Art. No. 0709 861 055
Catalogue Page 11 1031
Page 42
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
For Precision Handling
Safety Knife
•Automatic blade retraction via retracting spring.
• No need to search for suitable tools.
•Ergonomic, non-slip two-component handle.
• F its well and securely in your hand.
•Integrated blade magazine for five blades.
•O
ptimum storage of spare blades.
Art. No. 0715 66 013
Catalogue Page 12 2521
Retractable Knife
•Lock out position for cutting, retractable via manual slide.
•Blade changed in seconds without tools thanks
to magnetic retainer.
•Ergonomic, non-slip two-component handle.
•Integrated blade magazine for five blades.
Art. No. 0715 66 015
Catalogue Page 12 2521
Page 43
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Pack of 10
Universal Knife
Universal Knife With "Break-off“ blade system - 9 mm.
• Metal rail and pocket clip.
• Internal storage for two spare blades.
• Blade dimension: 85 × 9 mm.
Material
ABS Plastic
Length mm
130
Weight g
30
Art. No.
0715 66 915
Pack Qty.
10
Universal Knife With "Break-off“ blade system - 18 mm.
• Metal rail and automatic blade lock.
• Internal storage for two spare blades.
• Blade dimension: 100 × 18 mm
Material
ABS Plastic
Length mm
165
Weight g
80
Art. No.
0715 66 920
Pack Qty.
10
Universal Knife With "Break-off“ blade system - heavy duty
with spring retraction.
• Metal rail and automatic blade lock.
• Spring operated retractor.
• Blade dimension: 100 × 18 mm
Material
Length mm Weight g
Alu/Rubber/ABS 200
160
Pack Qty.
Art. No.
0715 66 211 10
Break-off blades 10 piece dispenser box.
• Material: SK2 Steel
• Easy Break-off function
Size mm
9
18
Length mm
85
100
Art. No.
0715 66 077
0715 66 057
Catalogue Pages: 12 2517
Page 44
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
Combination Shears
Right/ Left Hand Cutting
Length – 190mm
Weight – 100g
Art. No. 0714 03 14
Catalogue Page. 12 2541
Compact Pipe Cutter
•Plastic handle.
- Impact resistant design.
•Four support rollers with cut-in.
- For cuts close to the edge, precise telescopic ­guidance.
- Quick adjustment of the ­working range.
•Spare cutting wheel in handle.
•Even working radius.
•Interior de-burrer can be pushed out and rotated.
-A
dapts to the contour of the workpiece.
Application:
For copper, brass, aluminium and thin-­walled steel pipes and hard plastic
and plastic-coated pipes.
Diameter A max.
L1
mm inches
in mm
6-35 1/8“-13/8“ 153
Page 45
L2
H
Art. No.
in mm in mm
105 67
0714 551 235
Pack
Qty.
1
Catalogue Page 12 2561
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
A DIFFERENT LOOK - CUT-OFF DISCS
Dimensions mm
Dia. x Thickness
100 x 1.0
100 x 2.5
115 x 1.0
115 x 2.5
125 x 1.0
125 x 2.5
180 x 2.5
230 x 2.5
350 x 2.5
355 x 3.8
405 x 3.0
Bore
mm
16
Design
Max. rpm Art. No.
15,300
13,300
22.2
12,250
8,500
6,650
25.4
4,400
3,850
0669 230 101
0669 201 025
0669 230 111
0669 201 155
0669 230 121
0669 201 255
0669 201 825
0669 202 325
0669 203 502
0669 203 538
0669 204 053
Pack Qty.
100
50
100
25
100
25
30
20
25
Catalogue Page 03 1028
Page 46
Blue for Steel.
Green for Stainless Steel.
•Reinforced with high-grade fabric
(fibre-reinforced) for maximum fracture
resistance.
•Synthetic resin bonding makes the wheels
impact resistant.
• Cool running, low noise.
• Low dust.
•Complies with the most demanding safety
requirements of European Standard EN12413.
•Can be used for steel, iron, bronze.
Not suitable for non listed metals/alloys.
1mm Cutting Disc can be used for Stainless
Steel.
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
A DIFFERENT LOOK - GRINDING DISCS
Blue for Steel.
•Reinforced with high-grade fabric
(fibre-reinforced) for maximum fracture
resistance.
•Synthetic resin bonding makes the wheels
impact resistant.
• Can be used for steel and iron.
• Cool running, low noise.
• Low dust.
•Complies with the most demanding safety
requirements of European Standard
EN12413.
Dimensions mm
Dia. x Thickness
100 x 6.0
115 x 6.0
125 x 6.0
180 x 6.0
230 x 7.0
Bore
mm
16
22.2
Design
Max. rpm Art. No.
15,300
13,300
12,250
8,500
6,650
Pack Qty.
0669 260 106
0669 260 116
25
0669 260 126
0669 260 186
0669 260 237 10
Catalogue Page 03 1502
125X6MM AVAILABLE IN A PACKAGE DEAL!
Page 47
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
DO YOU WANT MORE POWER?
PURCHASE 500 GRINDING DISCS
& RECEIVE A BONUS
1100W ANGLE GRINDER!
Grinding Discs – 125x6.0mm
Art. No. 0669 260 126
Catalogue Page 03 1502
Minimum Order Quantity 500
Package Art. No. 0988 260 152
BONUS
Angle Grinder 125mm 1100W
Powerful 1100 watt, 125mm Angle Grinder
for grinding, cutting and roughing work.
•
•
•
•
•
Motor with constant electronics.
Restart protection.
Overload protection and gentle startup.
Recoil protection.
Twist-proof protective guard.
Anti Vibration System
Powerful
1100W
Valued at
$350.00
inc GST
Art. No. 0702 472 09
Catalogue Page 11 2911
Page 48
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
NEW FUELCURE - PETROL/DIESEL TREATMENT
Visit www.wurth.com.
au and view the Fuelcure
product demonstration, or
use our handy
QR code...
A multi-purpose tank treatment that also cures water related problems in fuel.
Suitable for all types of petrol and diesel fuel.
• Ideal for all petrol and diesel engines.
• Ideal for use in fuel storage tanks.
• Also suitable for biodiesel.
added
s
e
lu
e
Fuelcure will:
• Remove water contamination from your fuel.
• Neutralize acid build up.
• Dissolve resin and waxing.
• Improve your vehicles performance.
• Reduce your fuel use and save you money.
va
Benefit:
• Makes water content in the fuel tank combustible.
• Reduces fuel consumption, black smoke and other harmful emissions.
• Completely removes “gumming” or “waxing” from entire fuel system.
• Improves the lubricating properties of the fuel.
• Cleans and protects from the fuel tank to the combustion chamber.
• Prolongs engine life.
serv i c
Dosage (suitable for petrol/
diesel engines):
330ml is sufficient for 100
litres of diesel or petrol.
Art No. 0893 568 330
Catalogue Page 08 0531
Page 49
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
NEW DIESELCURE - COMMERCIAL DIESEL TREATMENT
Visit www.wurth.com.au
and view the Dieselcure
product demonstration, or
use our handy
QR code...
A high concentrate, multi-purpose tank treatment that also cures water related
problems in diesel fuel.
Suitable for all types of diesel fuel used in trucks, the marine industry, agricultural
and plant machinery. Ideal for use in fuel storage tanks. Also suitable for biodiesel.
added
s
e
lu
e
Dieselcure will:
• Remove water contamination from your fuel.
• Neutralize acid build up.
• Dissolve resin and waxing.
• Improve your vehicles performance.
• Reduce your fuel use and save you money
va
Benefit:
• Makes water content in the fuel tank combustible.
• Reduces fuel consumption, black smoke and other harmful emissions.
• Completely removes “gumming” or “waxing” from the entire fuel system.
• Improves the lubricating properties of the fuel.
• Cleans and protects from the fuel tank to the combustion chamber.
• Prolongs engine life.
serv i c
Dosage (suitable for
commercial, diesel
engines):
330ml is sufficient for 400
litres of diesel.
Art No. 0893 567 330
Catalogue Page 08 0532
Page 50
Metal Campaign - Valid for the month of February 2015 • Prices include GST
Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only
and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.