AST 2015 Program

AST 2015 Program
Tuesday, February 24, 2015
09:00
Welcome
Prof. Dr.-Ing. Otto von Estorff
09:05
Welcome Address by the
President of the Hamburg University of Technology
Prof. Dr. Dr. h.c. Garabed Antranikian
09:15
Plenary Lecture on Supersonic Air Transport:
The Status of Sonic Boom Prediction: Toward Low-Boom Design
09:45
Plenary Lecture on All Electric Aircraft:
The Coming Era of Distributed Electric Propulsion
Mike Park
Computational Aerosciences Branch
NASA Langley Research Center
Mark D. Moore
On-Demand Mobility Portfolio Manager
NASA Langley Research Center
10:15
Coffee
10:45
Presentations Block Ia: -- Special Session -All Electric Aircraft / Supersonic Air Transport
Room "Elbkuppel"
Chair: V. Gollnick
J. Kallo
DLR
Key Note: Opportunities and Challenges of Digitization
R. God
Hamburg University of Technology
Technical Challenges in Realising the Benefits of eAviation
M. Hornung
Bauhaus Luftfahrt
Certification Challenges for Wireless Aircraft Technologies
H. Fimpel
-- All Electric Aircraft --
-- t.b.d. --
Enabling Maintenance Wireless Testing of Aircraft Cabin
Components without Modification of the Network Configuration
M. Heinisch, W. Fischer, D. Nahm
Multi-Modal Assessment of High-Speed Airline Business Models
B. Liebhardt, V. Gollnick
TUHH/DLR
Reliable Transmission of Aircraft Data over Satellite
DLR's Low Speed Design and Validation Studies for SST
Configurations
R. Rudnik, M. Gaffuri
DLR
Improved Collaborative Decision Making through Application of
Commercial-off-the-Shelf Inform. and Comm. Technologies
HIKARI: Joining efforts to prepare future high speed air transport
13:05
Lunch
14:30
Presentations Block II-a:
Cabin and Comfort
Key Note: Product Trends in Aircraft Cabins
E. Blanvillain
Airbus Group Innovations
Room "Elbkuppel"
Chair: W. Gleine
M. Dechow
Airbus Operations GmbH
Low-Frequency Noise Protector Concepts for Aircrafts with
F. Langfeldt, W. Gleine, O. von Estorff
Counter-rotating Open Rotor Engines
Aircraft Fuselage Section Interconnections to Reduce the Structure- P. Marinova, F. Langfeldt, S. Golembiewski,
Borne Sound Transfer at Low Frequencies
S. Lippert, O. von Estorff, W. Gleine
Active Structural Acoustic Control for Coupled Fluid-StructureC. Hesse, M. Rose, H. P. Monner, M. Sinapius
Interaction Systems
Active Structural Acoustic Control with a Loudness Optimized
Actuator Placement
Airbus A400M-Fuselage as Vibroacoustic Test Bed
16:30
Coffee
17:00
Presentations Block III-a:
Cabin and Comfort
Experimental Investigation on Damping for Honeycomb Sandwich
Panels under Different Support Conditions
19:00
Room "Ellipse II-III"
Chair: F. Gronwald
Challenges in Hydrogen Fuel Cell Main Propulsion
The Savion SST: Can a Natural Gas Powered SST be Cleaner and J. Gibbs, V. Gollnick
Quieter than a Subsonic Aircraft?
TUHH/DLR
18:00
Presentations Block I-b:
Information and Communication Management
V. Papantoni, M. Rose, H. P. Monner,
M. Sinapius
D. Sachau, C. Köhne, K. Renger, H. Scheel,
M. Wandel
Room "Elbkuppel"
Chair: W. Gleine
J. Oltmann, R. Seemann, D. Krause
New Passenger Announcement Functions Using Speech-to-Text
M. Lüdtke, P. Klose, J. Trivedi
Mechanism
A New Laboratory for Aircraft Cabin and Cabin Systems to Support A. Baucke, W. Gleine, G. Konieczny,
New Educational Concepts and Research
M. Wiegmann, H. Zingel
Break
Reception and Dinner (Rickmer Rickmers)
Welcome Address by the
Free and Hanseatic City of Hamburg
Dr. Bernd Egert
State Secretary
Ministry of Economy, Transport and Innovation
M. Muehleisen, M. Venzke, C. Petersen,
A. Timm-Giel, V. Turau
N. Barraci, A. Sindlinger, M. Fueller, A.
Godehart, C. Pschierer, et al.
Modeling Top-Level Requirements for a Tangible User Interface in
T. Kiehl, R. God
the Aircraft Cabin
Embedded Cloud and Critical Systems: Technology Baseline and
Architecture Patterns
Presentations Block II-b:
Materials and Production
Key Note: On the Way to Additive Layer Manufacturing - Chances
& Challenges for the Future Industrial Production
Investigation of Fiber Reinforced Plastic Penetration Produced by
Laser Additive Manufacturing with Pin Size Variation
Accuracy Examination of an Adaptive Robot Joining Process for
the Automated Assembly of Large CFRP Structures
Endmilling of Recent CFRP Materials with Cemented Carbide and
Diamond Tools - Process, Tool Wear and Quality
Model-Based Control Architecture for Rapid Reconfiguration of
Assembly Fixtures and Assistance in Human-Robot Collabor.
Workcell Calibration for Robot Based Maintenance of Airplane
Engine Components
Presentations Block III-b:
Materials and Production
J. Gatard, M. Jakovljevic
Room "Ellipse II-III"
Chair: W. Hintze
P. Sander
Airbus Operations GmbH
A. Solbach, D. Hülsbusch, C. Emmelmann,
F. Walther
F. Schmick, C. Borrmann, J. Wollnack
W. Hintze, F. Brügmann
R. Müller, M. Vette, O. Mailahn, A. Ginschel,
J. Ball
T. Kötter, T. Domaschke, C. Schwienbacher, T.
Schüppstuhl
Room "Ellipse II-III"
Chair: W. Hintze
Development and Serial Production of Cargo Floor Panels for
Airbus A400M
Dr. Axel Meyer, Dr. Thomas Luhn
Methodology for Tolerance Analysis of Assemblies Through the
Numerical Simulation of the Process by Means of FEM.
Simulation Methodology for the Peen-Forming Manufacturing
Process of Light Alloys Aeronautical Panels
A. Chiminelli, F. Martín de la Escalera, R. Breto,
E. Duvivier, J.L. Núnez, L. Lizarduy
M. Laspalas, Y. Essa, E. Garcia, A. Escolán,
B. Hernandez, F. Martín de la Escalera
AST 2015 Program
Wednesday, February 25, 2013
08:30
Presentations Block IV-a:
Cabin and Comfort / Airframe Systems and Equipment
Room "Elbkuppel"
Chair: G. Schmitz
Presentations Block IV-b:
Materials and Production
Development and Experimental Study of an Indirect CO2 Onboard
J. Chodura, F. Thielecke
Cooling System
Aircaft environmental control system (ECS) Design: Virtual
Hardware in the Loop Simulation
Dynamic Simulation of an Aircraft Compartment Coupled to a
Ventilation System
Validation of the Zonal Thermal Model VEPZO/RADZO for Cold
Outside Conditions on a Business Jet Mock-Up
09:50
10:30
11:00
Key Note: -- t.b.d. -Electro-Hydrostatic Actuation System
for aircraft landing gear actuation
Coffee
Investigation on the Failure Mechanisms of CFRP Single-Lap
Shear Joint in Fatigue Loading
B. Sasanapuri, H. Yin, X. Shen, B. Carbon,
Steel Foil Reinforced Thin Ply Composites: Experimental and
C. Sander, R. Harwood
Numerical Study of Strength, Plasticity and Ply Size Effects
B. Michaelsen, J. Eiden, T. Giese, M. Schmid, J. Characterisation of Intrinsic Hybrid-Composites Consisting of FibreBrunnemann
Reinforced Polymer and Permeable Metal Plies
V. Norrefeldt, A. Pathak, A. Lemouedda,
Investigation of High-Performance Materials in Design of a 50000
G. Grün, M. Siede
rpm High-Speed Induction Generator for Use in Aircraft Applic.
M. Schuett, H. Wittich, K. Schulte, B. Fiedler
K. Masania, R. Geissberger, D. Stefaniak,
C. Dransfeld
B. Bosbach, W. V. Liebig, B. Fiedler
H.-C. Lahne, D. Gerling
R. Bähr
Airbus Operations GmbH
Integration of Functionalities into Cabin Lining Comp. based on
Sandwich Panels with Polycyanurate Matrix and Nap-Cores
N. Ischdonat, C. Dreyer, M. Bauer, W. Gleine
W. Davidson, J. Roizès
An Operational Load Related Method for Vibration Tests on
Components
M. Semsch, A. Schelenz, A. Hamann, S. Nebel
Presentations Block V-a:
Airframe Systems and Equipment
Room "Elbkuppel"
Chair: F. Thielecke
Presentations Block V-b:
Materials and Production
Room "Ellipse II-III"
Chair: B. Fiedler
Development of a Prognostics and Health Management System for
G. Jacazio, A. Mornacchi, M. Sorli
Electro-Hydraulic Servoactuators of Primary Flight Controls
Hydraulic Fluid Contaminated Composite Parts in Bonded Patch
Repairs
G. Peikert, M. Gubser, G. Gerig, E. W. Harris, J.
T. Massey
Design and Evaluation of Electrical Direct Drives with and without
Gearbox for Aircraft Systems
M.-S. Donea, D. Gerling
A FE Study on the Influence of Delamination Shape on Residual
Compressive Behavior of Delaminated Composite Structures
C. P. Dienel, T. Qaimari
Simulation of an Innovative Hybrid Actuating System
T. Röben, E. Stumpf, T. Grom, G. Weber,
T. Lammering
Health Monitoring of Complex Structures using Guided Waves
F. Raddatz, P. Wierach, M. Sinapius
SFB 880 - Efficient High Lift
J. Seume, S. Teichel, R. Radespiel,
M. Burnazzi, A. Dietzel, et al.
Lamb Wave Propagation in Complex Geometries - A Minimal
Model Approach
C. Heinze, M. Sinapius, P. Wierach
Highly Integrated Magnetoresistive Sensors for the More Electric
Aircraft
R. Slatter
Development of Efficient Simulation Methods for Ultrasonic Guide
Wave Propagation in Aircraft Structures
J. M. Vivar Perez
Automated Simulated Failure Analysis
T. Gabler, M. Tunnat, S. Bartuszies, C. Müller
13:00
Lunch
14:30
Presentations Block VI-a:
Airframe Systems and Equipment
Room "Elbkuppel"
Chair: F. Thielecke
Best Practices in System-Level Virtual Prototyping - Application to
Mechanical Transmission in Electromechanical Actuators
J.-C. Maré
System-Level Virtual Integration Study of an Aircraft Electrical
Power Network
T. Kreitz, R. Doering, S. Jäger, F. Thielecke
Flight Test of an Experimental (Liquid-to-Air) Skin Heat Exchanger
C. Colberg, E. Herail, A. Dannhauer,
B. Pelissier
Dynamic Simulation of Composite Latent Heat Storages integrated
T. Bezerra Helbing, G. Schmitz
into a Liquid Cooling System
15:50
Room "Ellipse II-III"
Chair: B. Fiedler
Concluding Remarks
Farewell Coffee
Prof. Dr.-Ing. Frank Thielecke