UltraLED PANEL 36 Lighting Catalog Supplement QUADRO 24 DL-QUADRO24 Specifications: Light source: 24 x 15W High power LEDs (3 in 1) n Light source life: average 50,000 hours n Color temperature linear control n General dimming and blackout for all four colors n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3 pin XLR In/Out n DMX channels: 5, 9 n Operating modes: DMX-512, Master/Slave, Stand alone n Resident programs n Internal calendar for specific programming n Software upgrade via DMX cable n Wireless receiver pre-installed effective distance within 1 km/1000 m n RDMX: Remote DMX addressing ready n Insulation Rating: IP65 n Power: 100260vAC 50/60Hz n Size: 18.1" x 8.7" x 15.4" n Weight: 14 kgs/30.8 lbs n Color: Black QUADRO 10 DL-QUADRO10 Specifications: Light Source: 10 x 15W High power LEDs (3 in 1) n Light source life: average 50,000 hours n Color temperature linear control n General dimming and blackout for all four colors n Color temperature linear control n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3-pin XLR In/Out n DMX channels: 5-9 n Operating modes: DMX-512, Master/Slave, Stand alone n Resident programs n Internal calendar for specific programming n Software upgrade via DMX cable n Wireless receiver pre-installed n RDMx: Remote DMX addressing ready n Insulation Rating: IP65 n Power input: 100-260vAC 50/60Hz n Size: 18.1" x 8.7" x 15.4" n Weight: 12 kgs/26.4 lbs n Color: Black Mini LED 4 DL-LEDIF48QO x 8W Quad Specifications: Beam angle: 15 degree lens standard n Optional beam angles achieved using Diffusion filters n Thermally cooled by heat sink case n Control: Auto, master/slave and DMX n On-board LCD display menu with 2 push buttons for settings n DMX Channels: 3 n Manual standalone settings: 6 static colors choice, internal chases (fading, stepping or flashing) at 9 different speeds n DMX Connectors: 3-pin XLR In/Out n Insulation Rating: IP 65 n Material: Heavy duty, light weight die cast aluminum housing n Mountable base n Power consumption: 55W n Power Input: auto-ranging 100-265vAC, 50/60Hz n Approvals: CE & cULus n Size: 13.11" x 5.79" x 8.27" n Weight: 4.3 kgs/9.46 lbs n Color: Black or White DL-LEDPANEL36C/B and DL-LEDPANEL36C/W Features: Light source: 36 high lumen 1 watt LEDS, 12 each of red, green and blue n DMX Mode: Ch1 - Red level, Ch2 - Green level, Ch3 - Blue level n Color: Black or White DL-LEDPANEL36W/B and DL-LEDPANEL36W/W Features: Light source: 36 high lumen 1 watt LEDS, 24 each of 6000K white, 12 each of Amber n DMX Mode: Ch1 - Cool White Level, Ch2 - Cool White level, Ch3 - Amber level n Color: Black or White DL-LEDPANEL36UV/B Features: Light source: 36 high lumen 1 watt UV LEDS n DMX Mode: Ch1 - UV level, Ch2 - UV level, Ch3 - UV level n Color: Black LED Flood 1 DL-LEDIF150TCO x 150W Specifications: Light source: 1 x 150W COB RGB LED (3 in 1) n Beam angle: 60 degrees n 4 Leaf barndoor for beam shaping n Operating modes: DMX, Static scene, Color Scroll, IR remote, Master/Slave n IR remote included n DMX Channels: 3, 5, or 6 n DMX Connectors: 3 pin IP In/Out n Adjustable yoke with 1/2" (13 mm) mounting hole n Insulation Rating: IP65 n Power consumption: 180W n Power input: 100250vAC 50Hz/60Hz n Size: 12.6" x 13" x 5.51" n Weight: 8.7 kgs/19.15 lbs n Material: Aluminum casting and Stainless steel hardware n Color: Dark Gray 01-28-15 Specifications: Light source: 4 x 8W Quad LED (4 in 1 RGBW) n Beam angle: 25 degrees n Operating modes: DMX, Static scene, Color Scroll, IR remote, Master/Slave n IR remote included n DMX Channels: 4, 6, or 7 n DMX Connectors: 3-pin IP In/Out n Adjustable yoke with 1/2" (13 mm) mounting hole n Insulation Rating: IP65 n Power consumption: 40W n Power input: 100-250vAC 50Hz/60Hz n Size: 8.5" x 6.3" x 8.07" n Weight: 2.0 kgs/4.4 lbs n Material: Aluminum and Stainless steel hardware n Color: Dark Gray The Panel 36 is a new generation of compact LED based lighting fixtures. Completely optimized, the Panel 36 uses the latest in electronic LED control to regulate and reduce premature LED burnouts. The Panel 36 features 36 x 1 watt high brightness LEDs which produce great color balance. The IP 65 rating makes this unit perfect for outdoor weather or standard indoor use. Built-in power supply makes this unit very easy to install and use, without the need for additional external power supplies or data convertors or data mergers. Units just need direct AC power and standard DMX data. 10900 Palmbay Drive, Orlando FL 32824 | U.S.A. | Phone: 407-857-8770 | Fax: 407-857-8771 | www.techni-lux.com Copyright © 2014 Techni-Lux, Inc. All rights reserved. Specifications subject to change without notice. Not responsible for typographical errors. DL-STUDIOLED600 rgbwa The steel support bracket allows an easy rotation of the head up to 210°. Mixing the intensity of the 5 LEDs groups, the Studio LED enables the realization of millions of variety of colors and reach a very high luminous flux. Thanks to the motorized optic system, it is possible to adjust the beam angle. The sophisticated focus system allows to reach a very high luminous flux. The beam angle can from 15° to 40°. The control panel has touch control technology with a flip function 2.5" graphics display which allows for easy control of the fixture. The IP54 rated fan, controlled by a microprocessor, working on a very low speed, determines low noise, granting the possibility to be suitable both for outdoor use to valorize building and historical monuments as well clubs, theatres and TV studios. Specifications: Light source: 22 high power RGBWA LED Arrays: 6 Red, 5 Green, 6 Blue, 4 White, 1 Amber LEDs n Total of 400 1W LED chips n Long life LED light source n 52 mm motorized optic system n Tilt manual 210° n 52 mm motorized optic system ZOOM 15° to 40° n Control panel with touch control technology Graphics display (2.5") with flip function Dedicated DMX channel for white balance DMX or automatic mode with MASTER/ SLAVE function Intelligent temperature with fan control system Flicker free function n USITT DMX 512 - 12 or 6 channels n DMX channels: ch1 = red, ch2 = green, ch3 = blue, ch4 = amber, ch5 = white, ch6 = dimmer, ch7 = strobe, ch8 = led fade speed, ch9 = rainbow, ch10 = white balanced, ch11 = zoom speed, ch12 = zoom n mode 6 ch: ch1 = red, ch2 = green, ch3 = blue, ch4 = amber, ch5 = white, ch6 = zoom n Insulation rating: IP 54 n Power: 120vAC 50/60HZ n fuse T6A n Size: (WxDxH) 28.4" x 15.2"(max) x 18.5"(max) n Weight: 31 kgs/68.3 lbs UltraLED Outdoor IP65 Tricolor Bar DL-BAR04TC16O/B The DMX Outdoor Tricolor Bar is an innovative UltraLED Series Color Bar using 16 x 3W Tricolor LED technology in a very compact fixture. Tricolor LED units reduce color shadows and produce a more even color beam over traditional RGB independent LED sources. The DMX Outdoor Tricolor Bar is ideal for applications in Stage, Theatre, Studio and Clubs, and additionally the IP65 rating makes it weather-resistant for outdoor applications. It is also great for back wall and cove lighting where a reliable high power LED source is required. The user can operate the unit "stand-alone" with built-in programs or connect to any standard DMX controller directly for easy controlling. Features power in and out using water resistant IP rated connectors for continuous runs of 6 units in a single row of power. Setup is easily done using a digital display and 4 push buttons, no dip switches! Specifications: Light source: Tricolor RGB color mixing with intensity and strobe effects n 16 tricolor 3W LEDs n Long life LED light source n Controllable as one bar or in 4 segments of 4 tricolor LEDs n Operating modes: DMX, Static Color, Color Changing, Color Fading, Auto Run, Sound Active, Master/Slave n Floor standing or clamp mount hanging bracket n Beam angle: approx. 25 degrees n DMX512 mode selections: 6, 9, 12, or 15 channels for maximum control of sections n Power & data in/out via special 3-pin IP connections n 18" Adaptor cables included for 3-pin XLR DMX connections n Digital display plus 4 push buttons n Material: extruded aluminum n Insulation rating: IP65 n Power Consumption: 60W n Power input: 100-240vAC, 50-60Hz n Size: 15.75" x 4.72" x 6.89" n Weight: 5.23 kgs/11.5 lbs UltraLED Fixture Yoke Mount Bracket DL-BAR04TC-3Y Fixture Yoke Mount Bracket - allows mounting of 2 or 3 DL-BAR04TC16O/B units, adjust angle and mount with clamps. Specifications: Material: Aluminum n Size: 2.36" x 16.54" x 21.65" n Weight: 1.05 kgs/2.31 lbs n Color: Black UltraLED BAR10TC24O Outdoor DL-BAR10TC24O/B The DMX Outdoor Tricolor Bar is an innovative UltraLED Series Color Bar using 24 x 3W Tricolor LED technology. Tricolor LED units reduce color shadows and produce a more even color beam over traditional RGB individual LED sources. The DMX Outdoor Tricolor Bar is ideal for applications in Architectural wall color washing, backdrops on Stages, Theatre, Studio and Clubs, and additionally the IP65 rating makes it weather-resistant for outdoor applications. It is also great for back wall and cove lighting where a reliable high power LED source is required. The user can operate the unit "standalone" with built-in programs or connect to any standard DMX controller directly for easy controlling. Features power in and out using water resistant IP rated connectors for continuous runs of 6 units in a single row of power. Setup is easily done using a digital display and 4 push buttons, no dip switches! Specifications: Light source: Tricolor RGB color mixing with intensity and strobe effects n 24 tricolor 3W LEDs n Long life LED light source n 1450 lux at 3 meters output n Controllable as one bar or in 8 segments of 3 tricolor LEDs n Operating modes: DMX, Static Color, Color Changing, Color Fading, Auto Run, Sound Active, Master/Slave n Floor standing or wall mounting with rear bracket n Beam angle: approx. 25 degrees n DMX512 mode selections: 6, 9, 15, 24, or 27 channels for maximum control of sections n Power & data in/out via special 3-pin IP connections n 18" Adaptor cables included for 3 pin XLR DMX connections n Digital display plus 4 push buttons n Material: extruded aluminum n Insulation rating: IP65 n Power Consumption: 100W n Power input: 100-230vAC, 50-60Hz n Size: 40" x 4.72" x 6.89" n Weight: 10.9 kgs/24 lbs LED Flood 9 DL-LEDIF98QO x 8W Quad Specifications: Light source: LED: 9 x 8W Quad LED (4 in 1 RGBW) n Long life LED light source n Beam angle: 25 degrees n Operating modes: DMX, Static scene, Color Scroll, IR remote, Master/Slave n IR remote (included) n In/Out: 3-pin IP connectors n Adjustable yoke with 1/2" (13mm) mounting hole n Insulation Rating: IP65 n Power consumption: 80W n Power input: 100-240vAC 50Hz/60Hz n Size: 10.25" x 6.3" x 10.25" n Weight: 4 kgs/8.8 lbs n Color: Dark Gray n Material: Aluminum and Stainless steel hardware 2 www.techni-lux.com Specifications are subject to change without notice. LED Architainment STUDIOLED 600 DL-P5 Specifications are subject to change without notice. Specifications: Light source: 44 LEDs Rebel Red, Blue, Green, white n Light source life: average 50,000 hours n Power Cable prepared to mount domestic plug n DMX Connectors: 5 pin XLR In/Out n Fixed spread angle: 15, 21 or 43 Degrees n Pan Tilt: 0°/110° n DMX Channels: 3 to 8, USITT DMX 512 A & RDM n Wireless DMX pre-installed n OLED 5-button graphic display with user-friendly menu n Upgradable software via DMX n Insulation Rating: IP65 n CTC and White Balance control (WB) n Power Consumption: 400W n Power: 208-240vAC, 50-60Hz n Size: 10.55" x 19.685" x 4.7244" n Weight: 7.7 kgs/16.94 lbs n Material: aluminum n Color: Black Outdoor LED Beam 30 DL-LEDBEAM30 The LED Beam creates a narrow shaft of high intensity light which is easily visible in the sky. Using special fresnel lenses can throw a beam a distance of up to 1300 feet. The LED Beam is similar to a search light effect. The LED Beam has an IP65 rating for indoor or outdoor use. Ideal for sky and architectural lighting. Specifications: Light source: 30 White Cree 3W LEDs n Long life LED light source n Beam angle: 1.8 degrees (narrowest angle) n Connector: Power wire in/out n Insulation Rating: IP65 n Power Consumption: 54W n Power: 110-250vAC, 50-60Hz n Driver CurrentL: 350mA n Size: 11.2" x 9.67" x 6.7" n Weight: 4 kgs/8.8 lbs n Material: aluminum housing n Color: Black UltraLED DMX Color RGB Bar DL-BAR10C5MM LED Architainment P-5 Full Color Outdoor LED Wash This is a dynamic UltraLED Series Color Bar, which can segment into 8 sections. It can be used for Stage effects, mobile DJs and DJ booths, night clubs or back wall color fills. The 5mm LEDS provide a medium power light source. The user can operate the unit "stand-alone" with built-in programs or connect to any standard DMX controller directly for easy controlling. Specifications: Light source: 384 bright 5 mm LEDs: 128 red, 128 green, 128 blue n Long life LED light source n RGB color mixing with intensity, chase and strobe effects n Controllable as one bar segment, two bar segments or eight bar segments n Operating modes: DMX, Static Color, Color Changing, Color Fading, Auto Run, Sound Active, Master/Slave n Floor standing with side brackets or hanging n Beam angle: approx. 30 degrees n DMX512 using 3,5,8,14,24,26 channels maximum n DMX Connectors: 3-pin XLR In/Out n Menu display of all settings n Power Consumption: 60W n Power input: 100-230vAC, 50-60Hz n Size: 41.5" x 2.5" x 3.5" n Weight: 2.0 kgs/4.4 lbs UltraLED DMX Color Bar 500 DL-BAR05C126 Specifications: Light source: 126 ultra bright 10 mm LEDs: 24 red, 54 green, 48 blue RGB color mixing with intensity and strobe effects n Long life LED light source n Controllable as one bar or in 3 segments of 1/3 sections n Operating modes: DMX, Static Color, Color Changing, Color Fading, Auto Run, Sound Active, Master/Slave n Floor standing with side brackets or hanging n Beam angle: approx. 30 degrees n DMX512 using 12 channels maximum n DMX Connectors: 3 pin XLR In/Out n Dip switch for settings n Power Consumption: 30W n Power input: 100-230vAC, 50-60Hz n Size: 22.6"x2.5"x3.5" n Weight: 1.5 kgs/3.3 lbs Fresnel 100 White LED FRESNEL Power LED DL-FRESNEL100 DL-FRESNELLED100 The compact Fresnel Power LED provides lighting output equivalent to a traditional 800W tungsten fresnel. Specifications: Light source: 100W LED n Long life LED light source n Color temperature: 6,000K n Fresnel Lens 120 mm dia. n Focusing Flood-Spot n Flicker free n Control: DMX and manual dimming n Dimming: 0-100% n Power consumption: 100W n Power: 110240vAC 50/60hz n Size: 14.1" x 7.9" x 9.8"n Weight: 4.5 kgs /9.9 lbs n Color: Black www.techni-lux.com Specifications: Light source: 1 x 100W COB 3200K White LED n Long life LED light source n Beam angle: adjustable zoom from 10 - 50 degrees n adjustable 4 leaf barndoors n Operating modes: DMX, Manual Setting, Master/Slave n Digital LCD display menu for settings n DMX Channels: 3 or 1 n DMX Connectors: 5-Pin XLR In/Out n Dimming selectable curves n Adjustable mounting bracket with 1/2" clamp mounting hole n Power consumption: 150W n Power input: 100V-250vAC 50Hz/60Hz n Size: 12.21" x 10.34" x 13.4" n Weight: 2.0 kgs/4.4 lbs n Color: Black n Material: Aluminum & steel L E D D i g i t a l Ligh tin g This is the innovative UltraLED Series Color Bar, which can be used for the Stage, Theatre, Studio and Clubs is great for back wall and cove lighting where a medium power LED source is required. The user can operate the unit "stand-alone" with built-in programs or connect to any standard DMX controller directly for easy controlling. 3 DL-QUADBOX1630TC Specifications: Light source: 16 x 30W COB LED (3 in 1) n Light source life: average 50,000 hours n Beam angle: 60 degrees n Operating modes: DMX, Static scene, Auto Run, Chases, Sound Active, Master/Slave n Digital LCD display menu for settings n DMX Channels: 3, 5, 48, or 51 channels n DMX Connectors: 3 and 5 Pin XLR In/Out n PowerCon in and out connectors n Adjustable mounting bracket n Power consumption: 560W n Power input: 100V-250vAC 50Hz/60Hz n Size: 13.58" x 14.96" x 6.5" n Weight: 7.8 kgs/17.2 lbs n Color: Black n Material: Steel Quad Bar DL-QUADBAR430TC Specifications: Light source: 4 x 30W COB LED (3 in 1) n Light source life: average 50,000 hours n Beam angle: 60 degrees n Operating modes: DMX, Static scene, Auto Run, Chases, Sound Active, Master/Slave n Digital LCD display menu for settings n DMX Channels: 3, 5, 12, or 15 channels n DMX Connectors: 3 and 5 Pin XLR In/Out n PowerCon in and out connectors n Adjustable mounting bracket n Power consumption: 130W n Power input: 100-250vAC 50Hz/60Hz n Size: 17.32" x 5.71" x 7.1" n Weight: 4.0 kgs/8.8 lbs n Color: Black n Material: Aluminum and steel Octo Bar DL-OCTOBAR830TC Specifications: Light source: 8 x 30W COB LED (3 in 1) n Light source life: average 50,000 hours n Beam angle: 60 degrees n Operating modes: DMX, Static scene, Auto Run, Chases, Sound Active, Master/Slave n Digital LCD display menu for settings n DMX Channels: 3, 5, 24, or 27 channels n DMX Connectors: 3 and 5 Pin XLR In/Out n PowerCon in and out connectors n Adjustable mounting bracket n Power consumption: 280W n Power input: 100-250vAC 50Hz/60Hz n Size: 34.7" x 5.71" x 7.1" n Weight: 6.2 kgs/13.64 lbs n Color: Black n Material: Aluminum and steel FlexiLED 100w COB White LED DL-FLEXILED100W/B Specifications: Light source: 1 x 100W COB 3200K White LED n Light source life: average 50,000 hours n Beam angle: 60 degrees n Two lenses included in frames, 15 and 25 degree n Operating modes: DMX, Static Setting, Auto Change, Sound Active, Master/Slave n Digital LCD display menu for settings n DMX Channels: 3 or 1 n DMX Connectors: 5-Pin XLR In/Out n Dimming selectable curves n Material: Aluminum cast housing n Adjustable mounting bracket with 1/2" clamp mounting hole n Power consumption: 120W n Power input: 100-250vAC 50Hz/60Hz n Size: 12" x 8.75" x 13" n Weight: 4.32 kgs/9.5 lbs n Color: Black FlexiLED Tricolor DL-FLEXILED100TC Specifications: Light source: 1 x 100W COB RGB (3 in 1) (red, green, blue) LED n Light source life: average 50,000 hours n Beam angle: 60 degree n Two lenses included in frames, 15 and 25 degree n Operating modes: DMX, Static Setting, Auto Color Change, Sound Active, Master/Slave n Digital LCD display menu for settings n DMX Channels: 3 or 5 n DMX Connectors: 5-Pin XLR In/Out n Dimming selectable curves n Adjustable mounting bracket with 1/2" clamp mounting hole n Power consumption: 120W n Power input: 100-250vAC 50Hz/60Hz n Size: 12" x 8.75" x 13" n Weight: 4.32 kgs/9.5 lbs n Color: Black n Material: Aluminum cast housing 4 www.techni-lux.com Specifications are subject to change without notice. LED Digital Lighting Quad Box LED Panel DL-FLEXILED3C30/B Specifications are subject to change without notice. High power 3 watt red, green, blue and white LEDS allows the FlexiLED RGBW to produce a vast array of well balanced color mixes. The FlexiLED RGBW uses the latest in control technology to produce the smoothest dimming curve possible. All FlexiLED units feature a filter frame holder which may be combined with LSD filters to better tailor the beam shape for many applications and events. Specifications: Light source: 30 x 3W LEDS 8 Red, 8 Green, 8 Blue and 6 White n Long life LED light source n Beam angle: 15 degree lens standard n Optional beam lens angles: 10, 25, 30, 45 degrees n Includes Color/ Filter holding Frame n Thermally cooled internally by heat sink case and noiseless fan n Operating modes: Sound, auto, master/slave and DMX n On-board LCD display menu with 4 push buttons for settings n Operation modes: a DMX 4, 5, 6 or 7 channel mode, manual color settings, internal programs, master/slave using sound and auto speed settings n DMX Channels: Ch1 - Master Dimmer, Ch2 - Red level, Ch3 - Green level, Ch4 - Blue Level, Ch5 – White Level, Ch6 - Macro, Ch7 – Strobe n DMX Connectors: 5-pin XLR In/Out n Dual stand yoke with 1/2" clamp mounting hole n Power Input: 120vAC or 220vAC, 50/60Hz n Power Consumption: 98W n Size: 11" x 10" x 12"n Weight: 4 kgs/8.8 lbs n Color: Black n Material: Rugged light weight die cast aluminum housing FlexiLED Mini UV DL-FLEXILED71UV/B Specifications: Light source: 7 x 1W UV Blacklight Blue LEDs n Long life LED light source n Beam angle: 25 degrees n Filter holding frame included n Operating modes: DMX, Manual level and flash speed, Sound Active, Master/Slave, IR Remote n LED Segment display menu for settings n DMX Channels: 2 n DMX Connectors: 3-Pin XLR In/Out n Dual adjustable mounting brackets n Power consumption: 25W n Power input: 100-250vAC 50Hz/60Hz n Size: 6.7" x 6.3" x 6.7" n Weight: 2.0 kgs/4.4 lbs n Color: Black n Material: Aluminum cast housing L E D D i g i t a l L i ght in g FlexiLED RGBW UltraLED UV Blacklight Wash Panel DL-PANEL2-36U UV Blacklight LED Wash Effect - a high power UV LED light fixture for making objects glow at high intensity. Reacts with white and phosphorescent paints and materials. Includes a 4 leaf barndoor for masking out and shaping the light beam when necessary. Specifications: Light source: 36 ultra bright 1w UV LEDs at 385~395 nm n Long life LED light source n 4 leaf barndoor n Controllable as one panel n Operating modes: DMX, Manual Settings, Sound Active n mounting bracket with 1/2 inch clamp hole n Beam angle: 30 degrees n DMX512 using 2 channels n DMX Connectors: 3-pin XLR In/Out n Dip switch for settings n Power Consumption: 50W n Power: 110-240vAC 50-60Hz n Size: 11.82" x 10.03" x 4.92" n Weight: 3.7 kgs/8.14 lbs n Color: Black n Material: Steel UltraLED PANEL1 Blacklight DL-PANEL1-192U Specifications: Light source: 192 UV at 385~400 nm n Long life LED light source n Controllable as one panel n Operating modes: DMX, Auto Run, Sound Active n Includes mounting bracket with three 1/2 inch clamp holes n Beam angle: 25 degrees n DMX512 using 2 channels n DMX Connectors: 3 pin XLR In/Out n Dip switch for settings n Power Consumption: 20W n Power: 100-230vAC 50-60Hz n Size: 9.85" x 7.7" x 3.62" n Weight: 2.0 kgs/4.5 lbs FlexiParUL The FlexiPar is an attractive aluminum die-cast PAR lighting fixture with selectable beam angle lenses and adjustable yoke. Its special reflector produces an output which exceeds traditional par-cans using higher wattage lamps. Reduces power consumption and dimmer distribution. Four interchangeable glass lenses are included to easily vary the light beam width from Wide, Medium, Narrow to a Very Narrow. Includes one 7.5"x7.5" gel frame and power cord. Power plug sold separately. Specifications: Lamp: HPL type maximum 575W n Power: dependent on lamp, 120v-230v 50/60Hz n Approvals: cETLus n Current draw: HPL575 at 4.8 Amps n Size: 11" x 10.5"x 11" n Weight: 3.64 kgs/ 8 lbs n Color: Black or White www.techni-lux.com Pa r C a n s PA-FLEXIPARUL/B PA-FLEXIPARUL/W 5 DL-DMXWANDT20C DL-DMXWANDT15C DL-DMXWANDT10C DL-DMXWANDT05C 2 meter 1.5 meter 1 meter .5 meter Double-sided DMX Wand Tubes can be seen from all sides. Each tube can be hung and be connected from one to the other using special 4 pin cables. Using multiple, you can create amazing aerial 3D and matrix effects. Specifications: Light source: SMD 5050 RGB LEDs n No flicker, constant current driven LEDs n RGB color mixing with independent control of each pixel (set of 4 LEDs) n View angle: 360 degrees n Control: DMX 512 n DMX In/Out: using special cables/connectors sold separately n Manually addressable using black box settings tool n Insulation Rating: IP65 n Includes one 3-way T-split 4-pin cable n Power input: 12vDC n Color: Clear / Black PCB DL-DMXWANDT05C .5 meter DL-DMXWANDT10C 1 meter DL-DMXWANDT20C 2 meter Number of LEDs per tube 32 64 96 128 Number of pixels of control 8 16 16 32 DMX Channels 24 48 24 96 Tubes per DMX universe Power consumption Size Weight 20 10 7 5 12W 24W 36W 48W 19.69"L x 1.25"D 39.4"L x 1.25"D 59"L x 1.25"D 78.7"L x 1.25"D 0.18 kgs / 0.396 lbs 0.35 kgs / 0.77 lbs 0.50 kgs / 1.1 lbs 0.67 kgs / 1.47 lbs Optional Accessories: DA-4PE1 4-Pin Male to Female Extension cable, used for DMX Wand to extend distance between them. Included Accessory: DA-4PT Specifications: 4-Pin connectors from 1 male to 2 females n Cable length: 12" wide x 6.5" high n Weight: 0.131 lbs n Color: Black Specifications: 4-Pin Male to Female, 1 meter length. n Cable length: 40" long x 3/4" diameter n Weight: 0.2 lbs n Color: Black DA-4PE5 4-Pin Male to Female Extension cable, used for DMX Wand to extend distance between them. DA-4PPT Specifications: T split cable with 2-Pin male to 4-Pin male in and out to 4 pin female n Cable length: 12" wide x 6.5" high n Weight: 0.19 lbs n Color: Black Specifications: 4-Pin Male to Female, 5 meter length. n Cable length: 197" long x 3/4" diameter n Weight: 1 lb n Color: Black DA-4PT 4-Pin 3way T Splitter Cable used for DMX Wand to link from one to the other. DA-4PPI 2-Pin Power in tail 10" used for DMX Wand. Provides power in connector with 10" tail to connect 12vDC. Specifications: 4-Pin connectors from 1 male to 2 females n Cable length: 12" wide x 6.5" high n Weight: 0.131 lbs n Color: Black Specifications: 2-Pin female to 2 meter tail with leads n Cable length: 78" long x 3/4" diameter n Weight: 0.525 lbs n Color: Black DA-4PDPI 4-Pin DMX Data 3-Pin XLR and 2-Pin Power In cable used for DMX Wand. Provides DMX in and power input 2 pin connector for 12VDC input. AC-DMXW1 DMX Address Writer for DMX wand, allows you to set the DMX start addresses via the DMX line. Requires 12vDC in, and other cables to interface with the DMX wands.. Specifications: 4-Pin female to DMX Data 3-pin Male XLR and 2-Pin Power In n Includes an End of line Terminator n Cable length: 12" wide x 6.5" high n Weight: 0.19 lbs n Color: Black 6 DL-DMXWANDT15C 1.5 meter Specifications: Used to set start DMX addresses n 2-Pin 12vDC input connection, XLR 3-pin female output n Size: 3.5" x 2.5" x 0.75" n Weight: 0.39 lbs n Color: Black www.techni-lux.com Specifications are subject to change without notice. LED Digital Lighting Double-sided DMX LED Wand Tubes Specifications are subject to change without notice. DL-DMXRIBBON/C DMX Ribbon is a flexible RGB tricolor flat LED strip. It operates on standard DMX input and 12vDC power. No special drivers needed. It is fully sealed for IP65 use. Every two LEDs are operated as 3 DMX channels. Requires DMX Address Writer box to change start address. Sold in 2.5 meter reels. Specifications: Light source: SMD 5050 RGB LEDs n Number of LEDs per meter: 32 n Number of pixels/sections of control per meter: 16 n 1.25 inch spacing between LEDs n 2.5 Meter reels per DMX universe: 4 n Can be shortened to 10 inch increments n No flicker, constant current driven LEDs n RGB color mixing with independent control of each pixel (set of 2 LEDs) n Beam angle: 120 degrees n DMX Channels: 48 per meter, or 120 per 2.5 meter reel n Control: DMX 512 n DMX In/Out: using special cables/connectors sold separately n Manually addressable using DMX Writer 1 n Insulation Rating: IP65 n Power input: 12vDC n Power consumption: 12W per meter, or 30W per 2.5 meter roll n Size: 99" length x 0.5625" wide x 0.1875" thick n Weight: 0.25 kgs / 0.55 lbs n Color: Clear / Black PCB Optional Accessory: AC-DMXW1 (See DL-DMXWAND Double-sided DMX LED Want Tubes Accessories for more information.) DMX Sphere L E D D i g i t a l L i ght in g DMX LED Ribbon DL-DMXSPHERE DMX Spheres can be seen from all sides. Each sphere string can be hung and be connected from one to the other using special 4-pin cables. Applications include decorations for retail shops, shopping centers, night clubs, hotel lobbies, staging and matrix curtains. Using multiples, you can create amazing aerial 3D and matrix effects. This product can be used indoor and outdoor. Specifications: Light source: 0.72W SMD 5050 RGB LEDs x 4 n Long life LED light source: Average 50,000 hours n Low power consumption (0.72W per sphere) and no heat n No flicker, constant current driven LEDs n RGB color mixing with independent control of each pixel n RGB color mixing with independent control of each pixel (set of 2 LEDs) n View angle: 360 degrees n DMX In/Out: using special cables/connectors (sold separately) n Manually addressable using black box settings tool n Insulation Rating: IP65 n Power input: 15vDC n Operating temperature rating: -20°C to 60°C n Size: 50 MM in diameter n Weight: 0.25 kgs / 0.55 lbs n Color: Opaque white or clear acrylic minimum 15 cm maximum 1 meter Cable color Black or White Cable gland Black or Light gray Number of spheres on one strand Voltage drop (See DL-DMXWAND Double-sided DMX LED Want Tubes Accessories for more information.) DA-4PE1 4-Pin Male to Female Extension cable DA-4PE5 4-Pin Male to Female Extension cable DA-4PPT T with 2-Pin power in and 4 Pin in and out for inline boost DA-4PDPI/S Specifications: 4-Pin female to DMX Data 3-Pin Male XLR and 2-Pin Power In n Includes an End of line Terminator n Cable length: 12" wide x 6.5" high n Weight: 0.19 lbs n Color: Black DA-4PT 2-Pin Power in tail 10" used for DMX Wand. Provides power in connector with 10" tail to connect 12vDC. Customizable Distance between spheres Optional Accessories: DA-4PPI 2-Pin Power in tail 10" used for DMX Wand. Provides power in connector with 10" tail to connect 12vDC. 170 maximum (Limited by DMX and power supply) After 50 Spheres www.techni-lux.com AC-DMXW2 Specifications: Used to set start DMX addresses n 7-24vDC input connection block, terminal block connections output n Size: 5.5" x 3" x 1" n Weight: 0.44 lbs n Color: Black 7 DL-MOSAIC/KIT DL-MOSAIC/EXP MOSAIC Flexible Light is a flexible LED strip that can color change. Its adhesive back and flexible body allows it to attach itself to any clean and dry surface. Each of the 5 strips included in the kit, connect end to end. Included bendable connectors allow the strips to make side turns to go around corners and contour its shape around any object when necessary. With Mosaic the user can create a unique ambience in any room with color: static, changing, flash, strobe, fade or smooth transitioning light effects. Selections are made using the wireless remote. All LEDs change together to the same selected color or mode. This commercial grade product is ideal for retail store displays and windows, cove lighting, shelving, nightclubs and lounges, under cabinets and bar counters, tv/entertainment rooms. DL-MOSAIC/KIT Sylvania MOSAIC LED Starter Light Kit comes with: n 5 x 2 foot Flexible Strips (10 feet total in kit) n 3 x Bendable Connectors n 1 x AC/DC Adapter n 1 x Controller with IR Receiver n 1 x Wireless IR Remote DL-MOSAIC/EXP Sylvania Mosaic LED Expansion Kit comes with: n 5 x 2 foot Flexible Strips (10 feet total in kit) n 3 x Bendable Connectors Commercial Grade version: cULus Rated, UV protected, Stronger material construction, Heavy duty power adaptor with no degradation of light, Higher lumen output Specifications: LED 3 in 1 RGB technology n Light source life: Average 10,000 hours n Color Temperature: 13,000K n 250 Lumen total for 10', 50 lumens per 2' strip n Beam angle: 120 degrees n Five 2-foot long Flexible LED Lighting Strips n Expandable to 40 strips (80 feet) maximum on one 36W power supply n 3 x Bendable connectors allow the strips to make sharp turns when needed n Controller with IR receiver n Wireless IR Remote n Remote allows selection of one of 15 colors, plus white, or set color changing patterns n The controller must be in clear sight for the remote to function n User can cut strips at clearly indicated 6" intervals marked with scissor icon n Strips have 3M adhesive backing which allows quick mounting, can not be repositioned once in place n LED Spacing: 2 inches apart n Insulation Rating: IP20 indoor use only n Power AC/DC 36 watt adapter 100-240vAC input to 12vDC 3.0A output n Strip Size: (L) 2 feet x (W) 10 mm x (H) 3 mm n Strip weight: 8 ounces n Weight of complete kit: 0.45 kgs/1lbs n Color: White Pinspots UltraLED Pin Spot DL-PINLED3W Specifications: Light source: 1 x 3W White LED Pin Spot n Beam angle: 6 degrees, includes an addition10 degree lens option n Clamp mounting hole: 3/8 inch n Power Consumption: 4W n Power: 110-240vAC, 5060Hz n Size: 6.22"x3"x2.4" n Weight: 0.5 kgs/1.1 lbs n Color: black n Material: lightweight plastic UltraLED Pin Spot DL-PINLED3-32B DL-PINLED3-56B a l Specifications: Light source: 1 x 3W White LED Pin Spot 3200K or 5600K n Light source life: average 50,000 hours n Beam angle: 5.5 degrees n Clamp mounting hole: 3/8 inch n Power Consumption: 3W n Power: 110-240vAC, 50-60Hz n Color: Black n Material: Steel UltraLED 4515 LED Replacement Lamp LL4515-3-32 LL4515-3-56 Replace traditional PAR 36 pin spot bulbs like the 4515, with this LED retrofit. Specifications: Light source: 1 x 3W White Cree LED Pin Spot 3200K or 5600K n Light source life: average 50,000 hours n Lumen intensity: 42205 n Beam angle: 5.5 degrees n Lamp socket: G 5.3 with external driver n Power Consumption: 3W n Power: 110-240vAC, 50-60Hz n Size: 3.1" Length x 4.4" Diameter n Color: Black n Material: Aluminium 8 www.techni-lux.com Specifications are subject to change without notice. LED Digital Lighting MOSAIC™Flexible Light SPIDER 810 LED Digital Lighting DE-SPIDER810 Specifications are subject to change without notice. Dazzling LED effect light with razor sharp beams of RGBW. It features two independently tilting bars of 4 high output beams. Control the beam color, chasing and rapid movement for a dynamic effect. Specifications: Light source: 8 x 10W CREE 4 in 1 RGBW LEDs n Light source life: average 100,000 hours n Beam angle: 6.5 degrees n Motorized tilt n Dual Bars Tilt: 85° n DMX Connectors: 3-pin XLR Male/Female n Control modes: DMX 512, master-slave, sound control, auto n DMX Channels: 7 or 12 n Dimmer: 0-100% n Variable strobe n LCD display n Insulation Rating: IP20 n Power Consumption: 120W n Power: 100250vAC, 50-60Hz n Mounting: omega adaptor included, requires clamp n Size: 15.94" x 9.25" x 5.91" n Weight: 5.5 kgs/12.1 lbs n Color: Black n Material: Steel housing frame/Plastic DL-ULTRALUX7C6 – Seven bright 15w RGBWAUV LEDS in compact and rugged enclosure Specifications: Rich and saturated color mixing n Light source: 7 x 15W 6 in 1 RGBWAUV LEDs n Light source life: average 50,000 hours n Beam angle: 15 degrees n Filter frame holder included n Control modes: DMX 512, master-slave, auto n DMX Channels: 6 or 10 n 16 Bit Drive n Smooth Dimming: 0-100% n LED display with 4-button menu settings n Dual yoke floor stand n Insulation Rating: IP20 n Data Connectors: 5 pin XLR Male/Female n Power Connector: Powercon in n Power Consumption: 120W n Power: 110-250vAC, 50-60Hz n Size: 9.25" x 11.41" x 4.65" n Weight: 3.5 kgs/12.1 lbs n Color: Black n Material: Aluminum DL-ULTRALUX18C6 – Eighteen bright 15w RGBWAUV LEDS in slim and rugged enclosure Specifications: Rich and saturated color mixing n Light source: 18 x 15W 6 in 1 RGBWAUV LEDs n Light source life: average 50,000 hours n Beam angle: 25 n Filter frame holder included n Control modes: DMX 512, master-slave, auto n DMX Channels: 6 or 10 n 16 Bit Drive n Smooth Dimming: 0-100% n LED display with 4-button menu settings n Dual yoke floor stand n Insulation Rating: IP20 n Data Connectors: Both 3 and 5 pin XLR Male/Female n Power Connector: Powercon in and out n Power Consumption: 300W n Power: 110-250vAC, 50-60Hz n Size: 12.4" x 10.4331" x 4.45" n Weight: 6.5 kgs/14.3 lbs n Color: Black n Material: Aluminum DL-ULTRALUX18VW – Eighteen bright 15w Variable White LEDS in slim and rugged enclosure Specifications: Variable white mixing from warm white to cool white n Light source: 18 x 15W 2 in 1 WW/CW LEDs n Light source life: average 50,000 hours n Beam angle: 25 n Filter frame holder included n Control modes: DMX 512, master-slave, auto n DMX Channels: 6 or 10 n 16 Bit Drive n Smooth Dimming: 0-100% n LED display with 4-button menu settings n Dual yoke floor stand n Insulation Rating: IP20 n Data Connectors: Both 3 and 5 pin XLR Male/ Female n Power Connector: Powercon in and out n Power Consumption: 300W n Power: 110-250vAC, 50-60Hz n Size: 12.4" x 10.43" x 4.45" n Weight: 6.5 kgs/14.3 lbs n Color: Black n Material: Aluminum Optional barndoors for ULTRALUX series: TA-BDR/UL18 Four Leaf Barndoor for UltraLux18 Fixtures TA-BDR/UL7 Four Leaf Barndoor for UltraLux7 Fixtures The First Professional HPL LED Replacement HPLed DL-HPLED/W30 DL-HPLED/W56 DL-HPLED/WC5 Light Product Code Color Temperature Luminous flux White Color DL-HPLED/W30 DL-HPLED/W56 DL-HPLED/C5 White 3000°K White 5600°K Color RGBAW 5000°K 13000 lm 16000 lm -- The HPLED assembly replaces the traditional HPL 575W and 750W Lamp for use in original profile-luminaires. The integral set of achromatic lenses set in the optical system enhances brightness and gives consistency of light distribution across the illuminated surface thus providing close and comparable light output to traditional tungsten bulbs. HPLED produces almost no heat typically associated with halogen lamps, fixtures remain cool to the touch. Specifications: Light source: High power LED n Light Source Life: average 50,000 hours n Available in several white color temperatures and RGBAW color mixing n 16-bit dimming n Allows upgrade of halogen 3000°K profile fixtures to a 5600°K Daylight output, removing the need for color correction filters in 5600K applications n Use original profile lenses n RDM and/ or DMX protocols n Integrated display board to facilitate fixture set-up n Silent cooling fan with speed adjustment n Auto switching power input n Pulse modulation up to 10 khz n Strobe effect n Protection sensor to ensure safe LED operation n 5 Pin IN/OUT XLR Connectors n PowerCon IN/OUT Connectors n Power Consumption: 170W n Power: 100-240vAC, 50-60Hz n Size: 8.43"x4.72" n Weight: 2.03 kgs/4.45 lbs n Color: Black n Material: Metal/Glass www.techni-lux.com 9 ST-LEDSTROBE60 Specifications: Light source: 6 x 10W Flat White LEDs n Light source life: average n Operating modes: Manual setting of flash and brightness, Sound active flash, DMX or analog control n No thermal shutdown n Settings via LED Segment display n DMX Channels: 2 - speed and dimmer n 0/10V Analog control via 1/4" RTS connectors n DMX Connectors: 3 pin XLR In/Out n Material: Steel n Adjustable mounting bracket n Power consumption: 65W n Power input: 100-250vAC 50Hz/60Hz n Size: 15.12" x 5.12" x 4.72" n Weight: 1.7 kgs/3.74 lbs n Color: Black Hanging Strobe 120v ST-STROBEH w/11 inch cord Specifications: Standard two prong AC plug with 11inch cable n Clear translucent dome with black hex body. Random flash from 1 to 3 seconds n Size: 1.87"x4.5" n Weight: 0.077kgs/0.17 lbs n Color: Black/Clear STROBE 5000 ST-STROBE5000 Specifications: Light source: 1500W xenon n Light source life: average 50,000 hours n Strobe: 1-25 flash/ second (continuous light) n Dimmer 0-100% n Automatic operation master/slave n Sync with music n 4 pre-built programs n Power input: The universal power supply and automatic power factor correction system enable the unit to be used anywhere, and the DMX control (which only uses 2 channels) allows it to be run by any controller. n DMX Connectors: 3 pin XLR In/Out n Size: 7" x 12.2" x 20.7" n Weight: 6 kgs/13.2 lbs n Color: Black n Material: Aluminum X-5 White LED Strobe ST-X5 This is environmentally friendly, compact fixture can deliver the same output as conventional high wattage strobes at a fifth of the power. The X-5 white LED strobe uses 3,000 Welly Power LED’s, with a 50,000 hour lamp life; rather than requiring 1600 amps to drive 100 conventional strobes the X-5 only requires a 300amp draw. The X-5 white LED strobe is housed in a black, slim aluminum chassis. It also contains 160° lens as standard, tilt of 0°-180°, 1, 3 or 4 DMX channels and set up is via OLED 5-button graphic display. Other features include: Simple Menu structure; Upgradeable software (via DMX); IP20 rated; standard Neutrik powerCON connectors and standard 5-pin XLR for DMX In/Out. Cooling method via rectangular heatsinks, set-up and address procedures with internal diagnostics, and control procedures ensure flicker-free lamps. Specifications: Light source: 3,000 White LED Welly Power n Light source life: average 50,000 hours n DMX Connectors: NEUTRIK PowerCon, 5 pin XLR In/Out n Fixed spread angle: 120 Degrees n Pan Tilt: Tilt 0°/110° n DMX Channels: 1, 3, or 4, USITT DMX 512 A &RDM n OLED 5-button graphic display with user-friendly menu n Upgradable software via DMX n Insulation Rating: IP20 n Power Consumption: 360W Standby power 6W n Power: 208-240vAC, 50-60Hz, possible daisy chain up to 10 X-5 n Size: 10.55" x 19.685" x 4.7244" n Weight: 5.8 kgs/12.76 lbs n Color: Black n Material: Aluminum XC-5 Color LED Strobe ST-XC5 XC-5 is the industry's first high output professional color LED strobe light. It is an environmentally friendly, compact fixture that can deliver the same output as conventional high wattage xenon strobes at a fifth of the power. The XC-5 color LED strobe uses 3,000 Welly Power LED’s. It's low power consumption would allow running 100 X-5's on only 300 amps, when compared to the 1600 amps required to power 100 conventional strobes. The XC-5 color LED strobe is housed in a black, slim aluminum chassis. It also features 160° lenses as standard, tilts from 0° - 110°, 1, 3, 4, 6 or 7 DMX channel modes of operation and is easily set up via OLED 5-button graphic display. In 7 channel mode, the panel can be split into 3 controllable settings. Both duration and rate can be adjusted to create various burst and flash effects. Other features include: Simple Menu structure; Upgradable software (via DMX); standard Neutrik powerCON connectors for in and pass through, and standard 5-pin XLR DMX In/Out. Using the included bottom plate, unit can sit on the floor, or with option, mount onto to two inch pipe via a fast lock omega clamp. Specifications: Light source: 1,080 RGB LEDs n Light source life: average 50,000 hours n DMX Connectors: NEUTRIK PowerCon in/pass thru, 5 pin XLR In/Out n Fixed spread angle: 160 Degrees n Pan/Tilt: 0°/110° n DMX Channel Modes: 1, 3, 4, 6 or 7 DMX Channels, USITT DMX 512A & RDM n OLED 5-button graphic display with user-friendly menu n Upgradable software via DMX n Insulation Rating: IP20 n Power Consumption: 360W Standby power 6W n Power: 208-240vAC, 50-60Hz n Possible daisy chain of power for up to 10 units in 208v n Size: 10.55" x 19.68" x 4.7244" n Weight: 5.5 kgs/12.1 lbs n Color: Black n Material: Aluminum 10 www.techni-lux.com Specifications are subject to change without notice. Strobes 60W LED Strobe ST-LEDSTROBE330 Super bright super fast LED strobe with individual LED rings! STROBES LED STROBE 330 Specifications are subject to change without notice. Specifications: Ten individual concentric rings of LEDs n Light source: 330 x 0.5W high power cool white LEDs n Light source life: average 100,000 hours n Incredibly fast strobing speeds n 16 bit Drive Smooth Dimming: 0-100% n Control modes: DMX 512, master-slave, auto n DMX Channels: 3, 10 or 1 n LED display with 4-button menu settings n Dual yoke floor stand n Insulation Rating: IP20 n Power Consumption: 150W n Power: 90-250vAC, 50-60Hz n Size: 12.4" x 10.4331" x 4.45" n Weight: 6.5 kgs/14.3 lbs n Color: Black n Material: Aluminum OSRAM KREIOS® FL 60W DL-KREIOS/FL60 led flood light The OSRAM KREIOS® FL 60W (Flood Light) LED fixture is a work light designed primarily for theatres. It can also be used to replace traditional 300W halogen worklights and for general flood lighting applications. Delivering lumens greater than traditional 300W quartz halogen lamps, the KREIOS FL allows superior illumination of the stage during set work and rehearsals. The color temperature and CRI have been selected to ensure accurate color rendering. With OSRAM LED product technology and ETL/CE certifications, the user receives many years of reliable, low-cost performance. APPLICATIONS: Work light for theatre set creation and rehearsals, General large area illumination such as exterior security lighting and loading docks Features: n CRI >85 provides accurate color rendering during set work and rehearsals n Diffused glass reduces glare and provides for a more comfortable workspace n Compact and lightweight design provides easy installation n IP65 rated for outdoor use n Low heat output means only passive cooling is required and silent operation n No UV/IR emissions eliminates the need for filters n Black body color maintains low visibility when not in use n 100V to 277 V AC input n Included with an unterminated 2 foot power cord n cETLus and CE certified n RoHS compliant Specifications: Light Source: 1 x 60W white 3000K LED n LED Lamp Life: >40,000 hours n 3,000 Lumens output n Quiet passive cooling, no fans to maintenance n Power Consumption: 60 watts n Power: 100-240vAC, 50/60Hz n Lightweight metal housing n Size: 11.25"L x 9"W x 7"H n Weight: 3.4 kgs/7.5 lbs n Body Color: Black Optional Accessories: Specifications: Size: 9.25" x 11.3" n Weight: 0.154 kgs/0.34 lbs n Color: Black TA-BDRKR/FL This barndoor can be used to control the light beam, reduce glare and light spill on the Kreios Flood series. It is suggested, but not required to use the TA-FRAMEKR/FL color frame to block off light bleeding from edges. Barndoor mounts with 4 screws. Specifications: 4 adjustable leaves n Overall Closed Size: 14.5" x 10" x 2.5" n Overall Open Size (leaves maximum open): 15" x 13"x 7" n Weight: 0.82 kgs/1.82 lbs n Color: Black n Material: Aluminum OSRAM KREIOS® SL 3200k 60w LED DL-KREIOS/SL3260 set light The OSRAM KREIOS® SL LED set light fixture for studio, theatre and wash light applications. Delivering luminous intensity equal to traditional 250W halogen fixtures, the KREIOS SL offers superior illumination and substantial cost savings. The color temperature and CRI have been selected to ensure accurate color rendering. OSRAM LED product technology and CE/UL certifications mean many years of reliable, low-cost performance. APPLICATIONS: TV Studio, Video Light, Retail, Museum, Photography Studio, Movie Cinema Lobbies, Concession areas, Restaurants plus all types of indoor general illumination applications. Features and Specifications: OSRAM OSLON® high CRI LEDs n 3,000 lumens equals intensity of traditional 250W halogen fixture n Uses 60W of power, 75% less energy compared to traditional halogen lamp n High CRI of 95 provides accurate color rendering n Light source life: average 30,000 hour n CCT: 3200K n 40 to 120° zoomable beam angle with locking position ring n Interchangeable 24° fixed spot reflector included for a tighter beam pattern n Multiple mounting options allows maximum flexibility in positioning n No UV/IR emissions n Compact & lightweight n Barn door assembly included for beam shaping n Gel frame holder included for color changing n LED Driver PSU can mount on bottom or on side of yoke n High-tech puffer cooling system allows for near silent operation n 6-ft cord with 3-prong Edison plug n 120 volts n CE/UL certifications n Size: 11"x7"x7" n Weight: 2 kgs/4.4 lbs n Two housing color options included: all black and black with orange adjustment ring www.techni-lux.com LED Digital Lighting TA-FRAMEKR/FL Kreios FL Gel Frame - use to sandwich color filters in front of fixture. Includes 4 screws to mount. 11 DL-KREIOSG1/B DL-KREIOSG1/W The OSRAM KREIOS G1 is an LED gobo image projector designed for a wide range of spot lighting applications that require bright images. The high powered LED light source and dedicated optical system delivers a crystal clear outline of the gobo with a homogeneous distribution of light across the entire image. KREIOS G1 is perfect for projecting messages, brand names and logos. Specifications are subject to change without notice. Gobo Projector OSRAM KREIOS® G1 LED Image Projector E Gobo Specifications: Light source: 1 x 20W white 6000K LED n Light source life: average 30,000 hours n Beam angle: 16 degrees n 120º tilt and 360º pan n 800 Lumens output n Quiet passive cooling, no fans to maintenance n Gobo Materials: glass, steel, transparencies n Gobo Size: E Standard 1.5" outer diameter, image area 1.2" n Magnetic gobo holder n No UV/IR emissions n RoHS compliant n cETLus and CE certified n Power Consumption: 20W n Power input: 100-240vAC, 50-60Hz n Power tail only, plug sold separately n Mounting plate included n Size: 10.3"L x 5.5"H x 2.5"W n Weight: 1.6 kgs/3.5 lbs n Color: Black or White n Material: metal The easy-to-open fixation ring (above) and magnets (below) of the gobo holder allow for fast replacement and high stability. The gobo holder easily attaches to the projector. What’s inside the box? n KREIOS G1 projector n Mounting bracket n 2 gobo holders n Sample gobos n 3 ft. power cord (plugless) n 6 ft. cord with plug sold separately Gantom IQ Micro Image Projector The smallest full color gobo projector on the market with zoom and focus. DL-DKGIQ DL-DKGIQX (Formally Darklight) Specifications: Light source: Cree XP-G Cool White LED n Light source life: average 50,000 hours n Gobo Size: outside diameter 19 mm (0.75in), inside live image area 15 mm (0.59in), optimal text image area 10 mm (0.39in) n Power Input 12V n Power Rating 2.7W (12V @ 225mA) n Dimming PWM n Lens Angle 25°-40° n Beam Edge Soft - Hard n Lead Wire Length 500 mm n Connectors: 2.1 mm ID / 5.5 mm OD DC jack n Insulation Rating: IP65 n Size: 30 mm (1.2") x 90 mm (3.7") Gobo: 19 mm (0.75") n Color: Black n Material: anodized aluminum The Gantom iQx micro image projector (DL-DKGIQX) with sharp optics, packs even more functionality to the product by integrating DMX control and a pattern generator. Brightness, speed, and pattern can be selected over 3 DMX channels. Preset patterns can also be stored to the fixture for standalone operation to run without signal (DarkBox Programmer required). Built in patterns include blink, strobe, fade, power surge, and candle flicker; perfect for adding a dynamic element to any display. Gantom One DL-DKG1WW DL-DKG1CW MicroLED Compared to a traditional 30W pinspot, the compact One runs cooler (4W) and safer on less power, has much cleaner optics, and can run on batteries. The One has an integrated, easy to use, magnetic accessory mounting system. Choose from a large selection of colors and diffusers to achieve any effect you choose, then install the perfect option without tools or hassle. 12 Specifications: Light source: Cree XLamp XP-E2 n Light source life: average 50,000 hours Input n Power Rating 4.8W (12V @ 400mA) n Beam Angle: 2.7 degrees (diffusable with included filters) n Field Angle: 4.5 degrees n Power input: 9-15VDC (12VDC nominal) n Power Connector: 2.1mm ID/5.5mm OD DC jack with screw terminal adapter n Insulation Rating: IP65 n Approvals: UL, CE n Size: 2.4" x 1.4" n Color: Black n Material: anodized aluminum Output: Cool White Color Temperature: 6500K Distance Center Beam Output: Warm White Color Temperature: 2700K Beam Width Distance Center Beam Beam Width 1.0m (3.3ft) 22100lx (2053.2fc) 0.05m (0.2ft) 1.0m (3.3ft) 15000lx (1393.5fc) 0.05m (0.2ft) 2.0m (6.6ft) 8100lx (752.5fc) 0.10m (0.3ft) 2.0m (6.6ft) 5500lx (511.0fc) 0.10m (0.3ft) 3.0m (9.8ft) 4100lx (380.9fc) 0.15m (0.5ft) 3.0m (9.8ft) 2700lx (250.8fc) 0.15m (0.5ft) 1100lx (102.2fc) 0.24m (0.8ft) 290lx (26.9fc) 0.48m (1.6ft) 5.0m (16.4ft) 1400lx (130.1fc) 0.24m (0.8ft) 5.0m (16.4ft) 10.0m (32.8ft) 400lx (37.2fc) 0.48m (1.6ft) 10.0m (32.8ft) www.techni-lux.com DL-DKGDMW Specifications are subject to change without notice. Specifications: Light source: White CCT tunable from 2700K to 6500K Cree MC-E LED n Light source life: average 50,000 hours Input 12V n Power Rating 4.8W (12V @ 400mA) n Output: combined 75 foot candles @ 2, 3.5 foot candles @ 10 feet n Dimming DMX512 2 channels n Lens Angle 20 degrees n Beam Edge Very Soft n Lead wire length: 360 mm n Connectors: 2.1 mm ID / 5.5 mm OD DC jack with screw terminal adapter, Signal: 3.5 mm TRS jack with screw terminal adapter n Insulation Rating: IP65 n Size: 37 mm (1.5") x 56 mm (2.2") n Color: Black n Material: anodized aluminum RGBW DL-DKGDMC Specifications: Light source: RGBW LED Cree MC-E LED n Light source life: average 50,000 hours Input 12V n Power Rating 4.8W (12V @ 400mA) n Output: combined 76 foot candles @ 2 ft, 3.5 foot candles @ 10 feet n Dimming DMX512 4 channels n Lens Angle 20 degrees n Beam Edge Very Soft n Lead wire length: 360 mm n Connectors: 2.1 mm ID / 5.5 mm OD DC jack with screw terminal adapter, Signal: 3.5 mm TRS jack with screw terminal adapter n Insulation Rating: IP65 n Size: 37 mm (1.5") x 56 mm (2.2") n Color: Black n Material: anodized aluminum Micro LED Gantom DMX Micro Intelligent Floodlight Variable White Gantom DMX Spot RGBW/DW Spotlight DL-DKGDMC/S Specifications: Light source: RGBW LED Cree MC-E LED n Light source life: average 50,000 hours Input 12V n Power Rating 4.8W (12V @ 430mA Max) n Output: combined 76 foot candles @ 2 ft, 3.5 foot candles @ 10 feet n Illuminance: 300 fc (2 ft ) 80 fc (4 ft ) 36 fc (6 ft ) 21fc (8 ft ) 14 fc (10 ft ) n Dimming: DMX512 4 channels n Beam/Field: 15 degrees / 38 degrees n Beam Edge: Soft n Beam angle: 11 degrees n Lead wire length: 360 mm n Connectors: 2.1 mm ID / 5.5 mm OD DC jack with screw terminal adapter, Signal: 3.5 mm TRS jack with screw terminal adapter n Insulation Rating: IP65 n Size: 40 mm (1.6") x 55.5 mm (2.2") n Color: Black n Material: anodized aluminum Precision X Series DL-DKPXXX (XX= LED color) Precision X is Darklight Dynamix™’s smallest LED luminaire that is more than 3X brighter than standard 5 mm LED fixtures. The Precision X is designed for selective illumination in pitch black environments. The recessed LED projects a uniform pinspot onto the subject with minimal light spill. Precision X is single super bright LED (50mA) enclosed in a rugged black anodized aluminum tube to produce localized lighting in dark environments. This model is suitable for highlighting small objects such as small picture frames, figurines, small props, books, etc. The light spread is 45 degrees and will cast a uniform circular spot on the highlighted object. Precision X operates on 12V DC and generates no heat. Specifications: Light source: Single 50mA LED n Light source life: average 50,000 hours n Beam angle: 45 degrees n Dual polarity input n Dimming: PWM or resistive dimming n Adjustable mount n Swappable with other Precision X, Y, and Z models n Insulation Rating: IP65 n Power input: 12V @ 50mA n Size: 1.614" x 1.614" x 1.98" n Weight: 75 g/0.165 lbs n Color: Black n Material: Anodized Aluminum chassis DL-DKPXRD Red DL-DKPXGR Green DL-DKPXBL Blue DL-DKPXAM Amber DL-DKPXCW Cool White DL-DKPXWW Warm White Precision Y Series DL-DKPYXX (XX= LED color) The Precision Y was designed specifically for dark attractions for providing detail lighting in pitch black settings. It may not be bright enough for applications where other light sources already exist in the environment. For general illumination applications, please consider the Precision Z Wash Light series. Precision Y uses three super bright LEDs enclosed in a rugged black anodized aluminum chassis to produce a wide angled wash. This model is suitable for atmospheric lighting. The wide spread angle (120 degrees) gives a glowing effect to the environment without a solid edge on the projected light. Precision Y operates on 12V DC and generates no heat. Specifications: Light source: Triple 20mA LEDs n Light source life: average 50,000 hours n Beam angle: 120 degrees n Midrange wash light n Dimming: PWM or resistive dimming n Lead wire length: 6 ft n Swappable with other Precision X, Y, and Z models n Insulation Rating: IP65 n UL listed: E347051 n Power: 12V @ 50mA n Current draw: 20mA n Size: 1.614" x 1.614" x 1.98" n Weight: 75 g/0.165 lbs n Color: Black n Material: Anodized Aluminum chassis DL-DKPYRD Red DL-DKPYGR Green DL-DKPYBL Blue DL-DKPYAM Amber DL-DKPYCW Cool White DL-DKPYWW Warm White DL-DKPYUV Ultraviolet www.techni-lux.com 13 DL-DKPAXX (XX= LED color) The Precision Alpha is an ultra-compact LED pinspot designed for space constrained applications. This point source luminaire gives the user an endless selection of colors and beam angles using theatrical filters. Softer and more natural colors can be achieved via filters due to a wider color band being emitted compared to single colored LEDs. The Precision Alpha is designed with future expandability in mind with the ability to attach additional optical accessories. As with all other Darklight luminaires, the Precision Alpha is industrially designed to last in indoor and outdoor environments. Internal driver circuitry ensures constant output over a wide range of input voltages and extends the LED life beyond 50,000 hours. Specifications: Light source: 1W LED n Light source life: average 50,000 hours n Lens: Angle 15 degrees - Diffusible with Filters n Lens Material: PMMA n Connector: Standard 2.1 mm/5.5 mm DC Jack n Minimum Lead Wire Length: (Luminaire Base to Connector) 9.84" n Minimum Pigtail Extension Length: 9.8" n Storage Temperature: -40 minimum, 25 typical, 85 Maximum °C n Operating Temperature: -10 minimum, 25 typical, 55 Maximum °C n Input Voltage 9, 12, 15V (24V available for custom orders) n Current Draw @ 12V 120mA n Input PWM Duty Cycle: 10-100% n Input PWM Frequency: 200-10,000Hz n Power Consumption: 1.3W n Insulation Rating: IP65 n Size: 2.56" x 1.34" x 1.1" n Weight 36 g/0.079 lbs n Color: Black n Material: Finish Anodized Aluminum *Please inquire about customized specifications. DL-DKPACW Cool White 6500K - 110 lumens - CRI 80 DL-DKPAWW Warm White 2850-3000K - 90 lumens - CRI 80-85 Precision Z Flood Series Precision Z Spot Series DL-DKPZSXX 14 (Formally Darklight) DL-DKPZFXX (XX= LED color) (XX= LED color) Precision Z Spot Series are high output spotlights suitable for illumination in a wide range of applications ranging from dark rides, museums displays, architecture, and entertainment venues. Precision Z Flood Series are high output floodlights suitable for illumination in a wide range of applications ranging from dark rides, museums displays, architecture, and entertainment venues. The Precision Z Spot Series produces pointsource LED illumination equivalent to traditional 20W halogen fixtures in a highly energy and space efficient package. The luminaire’s modular design allows it to be swapped with other fixtures without the hassle of cutting wires, allowing for fast design changes and reconfiguration. The industrially designed machined aluminum chassis gives the Precision Z an elegant form yet functions as a rugged shell and heat sink to protect the LED and core electronics even in outdoor and underwater environments. Internal driver circuitry ensures constant output over a wide range of input voltage and extends the LED life beyond 50,000 hours. A variety of colors, lens angles, and options are available. The Precision Z Flood Series produces pointsource LED illumination equivalent to traditional 20W halogen fixtures in a highly energy and space efficient package. The luminaire’s modular design allows it to be swapped with other fixtures without the hassle of cutting wires, allowing for fast design changes and reconfiguration. The industrially designed machined aluminum chassis gives the Precision Z an elegant form yet functions as a rugged shell and heat sink to protect the LED and core electronics even in outdoor and underwater environments. Internal driver circuitry ensures constant output over a wide range of input voltage and extends the LED life beyond 50,000 hours. A variety of colors, lens angles, and options are available. Specifications: Light source: Long life 1.5W LED n Light source life: average 50,000 hours n Lens Angle 15 degree narrow beam n Lens Material PMMA n Connector Standard 2.1 mm/5.5 mm DC Jack n Minimum Lead Wire Length (Luminaire Base to Connector): 9.84" n Minimum Pigtail Extension Length 9.84" n Storage Temperature: -40 minimum, 25 typical, 85 Maximum °C n Operating Temperature: -10 minimum, 25 typical, 55 Maximum °C n Input Voltage^: 9, 12, 15 V n Input Current @ 12VDC: 125mA n Input PWM Duty Cycle†: 10-100% n Insulation Rating: IP68 n UL listed, for use with class 2 transformer: E347051 n LED Power Consumption: 1.5 watts n Size: 1.614" x 1.614" x 1.97" n Weight: 75 g/0.165 lbs n Color: Black n Material: Finish Anodized Aluminum Specifications: Light source: Long life 1.5W LED n Light source life: average 50,000 hours n Lens Angle 120 degree wide beam n Lens Material PMMA n Connector Standard 2.1 mm/5.5 mm DC Jack n Minimum Lead Wire Length (Luminaire Base to Connector): 9.84" n Minimum Pigtail Extension Length 9.84" n Storage Temperature: -40 minimum, 25 typical, 85 Maximum °C n Operating Temperature: -10 minimum, 25 typical, 55 Maximum °C n Input Voltage^: 9, 12, 15 V n Input Current @ 12VDC: 125mA n Input PWM Duty Cycle†: 10-100% n Insulation Rating: IP68 n UL listed, for use with class 2 transformer: E347051 n LED Power Consumption: 1.5 watts n Size: 1.614" x 1.614" x 1.97" n Weight: 75 g/0.165 lbs n Color: black n Material: Finish Anodized Aluminum ^24V input version available for custom orders, please inquire. †Dimming is not standard on all models, please inquire. ^24V input version available for custom orders, please inquire. †Dimming is not standard on all models, please inquire. DL-DKPZSRD Red 620-630nm - 50 lumens DL-DKPZSGR Green 515-535nm - 70 lumens DL-DKPZSBL Blue 455-475nm - 20 lumens DL-DKPZSAM Amber 585-595nm - 45 lumens DL-DKPZSCW Cool White 6500k - 90 lumens DL-DKPZSWW Warm White 2850k - 75 lumens DL-DKPZSUV Ultraviolet 395-405nm - 300mW DL-DKPZFRD Red 620-630nm - 50 lumens DL-DKPZFGR Green 515-535nm - 70 lumens DL-DKPZFBL Blue 455-475nm - 20 lumens DL-DKPZFAM Amber 585-595nm - 45 lumens DL-DKPZFCW Cool White 6500k - 90 lumens DL-DKPZFWW Warm White 2850k - 75 lumens www.techni-lux.com Specifications are subject to change without notice. Micro LED Precision Alpha Series DL-DKPDMX The Precision DMX is the world's smallest DMX512 controllable theatrical Floodlight. This compact 3 watt RGB light is only 2 inches long yet packs comparable punch to traditional 25 watt PAR36 fixtures! Specifications are subject to change without notice. The Precision DMX is a microprocessor based intelligent light fixture and can be controlled to generate any color of the spectrum and includes many built-in functions such as strobing, color fading, macros, uniform dimming, and much more. Replace your traditional DMX lights with this compact, energy efficient, and intelligent solution. Specifications: Light source: Single high powered 3W RGB LED full color spectrum capable n Light source life: average 50,000 hours n Beam angle: 45 degree narrow flood lens n Lead wire length 6" n Stand alone configurable light without DMX (requires DarkBox Programmer sold separately) n Each RGB channel individually controllable n Built-in functions: strobing, fading, color fading, color macros, uniform dimming, flicker n DMX512 controllable - 7 channels n DMX Channels: ch1=Red brightness, ch2=Green brightness, ch3=Blue brightness, ch4=Color macros, ch5=Strobe and speed control, ch6=Pre-programmed sequences, ch7=Unified dimming n Pinout: Red: +12VDC, Blue: Ground, Green: DMX+, Yellow: DMX-, Black: DMX Ground n Adjustable mount n Low heat n Insulation Rating: IP65 n Input voltage: 12VDC n Current draw: 350mA max n Size: 2.0" x 1.8" x 2.0" n Color: Black n Material: Anodized aluminum chassis PowerPak 5000 Power Supply 12v output PowerPak Mini Power Supply 12v output PowerPak 5000 is our larger regulated power supply designed to power even more Precision Lights. Small 12 volt / 1 amp AC wall adapter (UL Listed) suitable for any Precision light and ready to plug into your wall outlet. Unit comes with a screw terminal adapter to allow for easy splicing onto bare wires. DA-DKPP5000 Specifications: Powers up to 40 PZ, 240 PY, or 240 PX lights n Regulated DC output at 12V n Power input: 100-240vAC n Power output: 12vDC n Current output: 5000mA n DC jack size: Standard 2.1/5.5mm n Color: Black n Material: Durable ABS plastic chassis Micro LED Precision DMX RGB - 12V DA-DKPPM Specifications: Power input: 100240vAC (50-60Hz) n Power output: 12vDC (regulated) PowerPak Portable 12V PowerPak 5000 Pro 12V output (batteries not included) DA-DKPPP DA-DKPP5000P PowerPak 5000 Pro is our larger WATERPROOF regulated power supply suitable for outdoors or underwater applications. This power supply only comes with bare wire leads, it is up to the user to find adequate wire harnessing solutions on both the AC input and DC output portions of the supply. Recommended for users with electrical installation background only. output 8xAA Battery holder for 8 x AA batteries with 2.1 mm ID circular plug, compatible with all Precision Lights. With 8 standard alkaline AA batteries, you can run a single Precision Z for over 20 hours and a single Precision X or Y for over 120 hours. Great for making your Precision Light portable or spot checking your light before you install. Specifications: Insulation Rating: IP67 n Regulated DC output at 12V n Power input: 100-240vAC n Output voltage: 12V DC n Color: White n Material: Aluminum chassis www.techni-lux.com 15 CT-DKDBDMXM The DarkBox DMX Micro is an ultra compact and scalable single output DMX controlled LED dimmer. The DMX Micro also has a variety of built-in patterns (blink, strobe, candle flicker, power surge flicker, and pulse) for special effects lighting without the need to program complicated DMX signals. This device occupies 3 DMX channels, which controls brightness, speed, and mode. (Formally Darklight) The DarkBox DMX Micro comes factory defaulted to DMX address 1. Due to the compactness of the device, an external DarkBox Programmer is required for address selection beyond the default. When the device powers up, a sequence of pulses on the 100s, 10s, and 1s LEDs will indicate the programmed DMX address. For example, an address of 512 will pulse the 100s LED 5 times, 10s LED 1 time, and 1s LED twice. Power and signal are delivered using standard 2.1 mm DC jacks and 3.5 mm mini-jacks, respectively. Multiple devices can be chained together for unlimited expandability to match the user's needs. DMX signal via mini-jack: Darklight DMX controlled products use 3.5mm mini-jacks (stereo audio tip-ring-sleeve jacks/plugs) due to the compactness of their size. While standard DMX applications call for XLR plugs, we design our devices using mini-jacks to allow for miniaturization. Users have the choice of splicing the signal cable to convert from XLR to mini-jack or simply use off the shelf male to male stereo audio extension cables to carry signal. Experiementally, we've tested over 50 of our DMX devices daisy chained together over 300 meters without signal degradation using audio cable. Specifications: Makes any dimmable 12V LED flicker, strobe, blink, surge, pulsate, or dim n Highly scalable by daisy chaining multiple fixtures n LED indicator displaying output mode even without external lights attached n algorithm never repeats for unique flicker patterns n Drives up to 8 PZ or PA, 50 PY, or 20 PX lights n Input voltage: ±12V DC n Output signal: 12V PWM n Max output current: 1000mA n DC jack size: Standard 2.1/5.5 mm n Signal jack size 3.5 mm mini-jack n Size: 1.5" x 1.5" x 0.75" DarkBox Programmer DMX - 12v CT-DKDBPROG The DMX Programmer is a tool used to adjust the DMX address of Precision DMX lights. Extremely simple to use: plug in Precision DMX on one end and power on the other end, adjust the controls to the desired address and push "X" to write the new address into the Precision DMX's memory. Unplug the module and link the Precision DMX back onto the DMX512 system and you're good to go! The DMX Programmer also features built-in a 224 channel DMX controller for use with static effects. A great tool to have for signal and fixture verification. This tool is also electrically protected from DMX line short circuits. Digital Moving Light Specifications: Hand held DMX address selector for Precision DMX lights n 224 channel DMX controller n Over 15 sample chase patterns compatible up to 32 individually addressed DMX fixtures n Testing and fixture verification modes n 3 digit LED display n Dual polarity input n 4 buttons for intuitive operation n Input voltage ±12V DC n Max output current 1000mA n DC jack size Standard 2.1/5.5 mm n Size: 2.8" x 2.1" x 0.7" 16 DarkBox Flicker - 12v CT-DKDBFLICK The DarkBox Flicker is an easy to use yet powerful special effects pattern generator and dimmer for LEDs. Single button operation allows the user to select different output patterns such as candle flicker, power surge flicker, blink, strobe, and brightness. Clicking the button cycles through the various modes while holding the button chooses the brightness of each mode. Over 15 mode and speed combinations to choose from. Specifications: Makes any dimmable 12V LED flicker, strobe, blink, surge, pulsate, or dim (3 speeds for each pattern) n Single click of a button to change patterns. n Flicker module remembers its set pattern even when power is cut off n LED indicator displaying output mode even without external lights attached n Never repeating algorithm for unique flicker patterns n Drives up to 8 PZ, 8 PA, 50 PY, or 20 PX lights n Input voltage: ±12V DC n Output signal: 12V PWM n Max output current: 1000mA n DC jack size Standard 2.1/5.5 mm n Size: 1.9" x 1.1" x 0.7" VectorLED 712QB DM-VECTORLED712QB Extremely small, fast and powerful led moving beam with low power consumption Specifications: Light source: 7 x 12W (Quad 4 in 1 RGBW) LEDS n Output: 7100 lux at 3 meters n Long life LED light source n Individual LED control n Pan/Tilt movement range: 540/ 270 degrees n Beam Angle: 8 degrees n Operation modes: run standalone master/slave, DMX, or sound active n Digital shutter quick strobing effects and blackouts n Smooth electronic dimming: 0-100% n Electronic strobe with pulse and random effects n Special optical combining lenses for smooth and even color mixing n DMX Channels: 6, 13, or 37 channels n DMX Connectors: 3 pin XLR n 4 button LCD display menu system for addressing and fixture settings n Approvals: CE n Power in: IEC connector n Insulation Rating: IP20 n Fuse: 5A (Mini 5 x 20MM) n Power consumption: 150W n Power: 110-240vAC 50/60HZ n Size: 11.97" x 10.5" x 6" n Weight: 6 kgs / 13.20 lbs n Color: Black www.techni-lux.com Specifications are subject to change without notice. Micro LED DarkBox DMX Micro - 12v DM-VECTORLED37QWZ Specifications are subject to change without notice. The powerful output is produced by 37 x 10W Quad 4 in 1 RGBW leds, which allows it to produce rich and vibrant color washing. The vectorLED 37Q Wash Zoom is feature packed and projects a beam similar in output to traditional 575 watt metal halide wash fixtures, yet uses only 400 watts of power maximum. Furthermore the fact there is little heat from its LED light source allows it to exist in a super compact, fast moving and stylish body design. The VectorLED 37Q Wash Zoom weighs only 28 pounds. Additionally its capabilities include a smooth motorized zoom function that spreads the beam from a narrow 13 degrees to a wide 45 degrees. Specifications: Light source: 37 x Cree MC-E 10W Quad 4 in 1 RGBW LED engines n Light source life: average 60,000 hours n Flicker free LED operation n Pan/Tilt movement range: 450 / 300 degrees n High resolution 16 bit pan/tilt movement for accurate positioning n Consistent & auto correction pan/tilt positioning n Motorized Zoom from 13 to 45 degrees n RGBW color mixing plus CTC n Macro color functions n Digital shutter quick strobing effects and blackouts n 3 Zones of concentric rings of LED control n Digital dimming 0 - 100% for smooth fades n Control: DMX 512, standalone and master/slave n DMX Channels: 14, 18, or 30 n DMX Connectors: 3 pin and 5 pin XLR In/Out n Large Backlit Digital LCD display menu system for addressing and fixture settings n Remote reset n Quiet forced air ventilation n Dual carrying handles n Includes fast locking mounting omega bracket n Insulation Rating: IP20 n PowerCon power input n Power consumption: 400W n Power Input: Autoswitching 90-250vAC 50/60hz n Size: 17.9"H x 14.0"W x 8.5"D n Weight: 13.0 kgs / 28.6 lbs n Color: Black Classe LED Wash 60 Classe LED Wash 108 Specifications: Light source: RGBW 60 3W high power LEDs n Seoul LEDs: 22 red 3W, 17 green 3W, 15 blue 3W, 6 white 3W n Light source life: average 100,000 hours n Beam angle 28 degrees n Optional lenses n Automatic operation master/slave n Sync with music n 8 prebuilt programs n General dimming and blackout for all four colors n Pan/TiltPan 540° (optional 630°) Tilt 265° (16 bit) n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3 pin and 5 pin XLR In/Out n 13 DMX channels n RDMX: remote DMX addressing, sound control switch by controller n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD display n Wireless receiver pre-installed effective distance within 1 km/1000 m n Power input: 100-240vAC 50/60Hz n Size: 11" x 8.7" x 15.4" n Weight: 6 kgs/13.2 lbs n Color: Black Specifications: Light source: 108 3W high power LEDs n Seoul LEDs: 39 red 3W, 29 green 3W, 30 blue 3W, 10 white 3W n Light source life: average 100,000 hours n Beam angle 39.5 degrees n Optional lenses n Automatic operation master/slave n Sync with music n 8 pre-built programs n General dimming and blackout for all four colors n Pan/TiltPan 540°(optional 630°) Tilt 265° (16 bit) n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3 pin and 5 pin XLR In/Out n 13 DMX channels n RDMX: remote DMX addressing, sound control switch by controller n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD display n Wireless receiver pre-installed effective distance within 1 km/1000 m n Power input: 100-240vAC 50/60Hz n Size: 13" x 9.1" x 17.32" n Weight: 9 kgs/19.8 lbs n Color: Black DM-LW60 DM-LW108 Digital Moving Light VectorLED 37QWZ Classe LED Wash Z60 DM-LWZ60 Specifications: Light Source: 36x10W (4 in 1) RGBW LEDs n Light source life: average 50,000 hours n Beam angle: Motorized zoom 10°-60° n Automatic operation master/slave n Sync with music n 8 pre-built programs n General dimming and blackout for all four colors n Pan/Tilt: Pan 540°(optional 630°) Tilt 265° (16 bit) n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3 pin 5 pin XLR In/Out n DMX Channels: 14 n LCD display n Wireless receiver pre-installed n Power input: 100-240vAC 50/60Hz n Size: 18.1"x8.7"x15.4" n Weight: 9 kgs/19.8 lbs n Colors: Black Classe LED Wash Z40 DM-LWZ40 Specifications: Light Source: 3x10W OSRAM HO (4 in 1) RGBW LEDs n Light source life: average 100,000 hours n Beam angle: Motorized zoom 10°-40° n Automatic operation master/slave n Sync with music n 8 pre-built programs n Color temperature: 2500k-10000k n Preset color temperature scene with: 3200k, 4300k, 5600k, 6500k n General dimming and blackout for all four colors n Pan/Tilt: Pan 540°(optional 630°) Tilt 265° (16 bit) n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3 pin 5 pin XLR In/Out n DMX Channels: 18, 30, 160 n RDMX: remote DMX addressing, sound control switch by controller n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD display n Wireless receiver pre-installed n Power input: 100-240vAC 50/60Hz n Size: 14.1"x13.2"x23.5" n Weight: 20 kgs/44 lbs n Color: Dark Gray www.techni-lux.com 17 DM-LWZ20 Specifications: Light Source: 19x10W OSRAM HO (4 in 1) RGBW LEDs n Light source life: average 100,000 hours n Beam angle: Motorized zoom 9°-43° n Automatic operation master/slave n Sync with music n 8 pre-built programs n General dimming and blackout for all four colors n Pan/Tilt: Pan 540°(optional 630°) Tilt 265° (16 bit) n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3 pin 5 pin XLR In/Out n DMX Channels: 20, 32, 42 n Operating modes: remote DMX addressing, sound control switch by controller n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD display n Wireless receiver pre-installed n Power input: 100-240vAC 50/60Hz n Size: 12.9"x9.1"x15.5" n Weight: 12 kgs/26.4 lbs n Color: Dark Gray Z-BYRON DM-BYRONZ Specifications: Light Source: 7x15W (4 in 1) RGBW LEDs n Light source life: average 50,000 hours n Beam angle: Motorized zoom 18°-36° n Automatic operation master/slave n Sync with music n 7 pre-built programs n Color temperature linear adjust from 2500K to 8000K n Preset color temperature scene with: 2700K, 3200K, 4300K, 5600K, 6500K, 8000K n General dimming and blackout for all four colors n Pan/Tilt: Pan 540°(optional 630°) Tilt 265° (16 bit) n Strobe: 1-25 flash/second and pulse effect n DMX Connectors: 3 pin XLR In/Out n DMX channels: 15, 17, 24 n LCD display n Strobe: 1-25 flashes per second and pulse effect n Wireless receiver preinstalled n Power consumption: 110W n Power input: 100-240vAC 50/60Hz n Size: 10.1" x 8.7" x 13.6" n Weight: 5.5 kgs/12.1 lbs n Color: Black VectorLED 160 SPOT DM-VECTORLED160S VectorLED is a series of intelligent moving lights, at their heart using a long life LED light source. VectorLED represents the new direction of light in motion. The VectorLED 160 Spot is featured packed and projects a beam similar in output to traditional 200 watt metal halide fixtures, yet uses only a 60 watt LED. Furthermore the fact there is little heat from its LED light source allows it to exist in a super compact and stylish body design. The VectorLED 160 Spot weighs only 18.7 pounds, making it the most powerful light in its weight class. Among its capabilities are a selection of razor sharp gobo beams, rotating gobos, motorized focus, fast action strobing, electronic dimming, rich dichroic colors and rotating prism. Specifications: Light source: Long life 60W white LED engine n Long life LED light source n Pan/Tilt movement range: 540°/270° n High resolution 16 bit pan/tilt movement for accurate positioning n Pan/Tilt motor speed n Consistent and auto correction pan/tilt positioning n Color wheel: 6 dichroic colors plus open n Bi-directional color wheel continuous rotation for rainbow effect n Gobo wheel: 7 plus open rotating n Gobo wheel: continuous rotation n 3-facet rotating prism, variable speed in both directions n Motorized remote focus n Digital shutter for 0 to 20 FPS strobing effects and quick blackouts n Digital dimming 0 - 100% for smooth fades with even fields n Beam angle: 11° n Luminous output: 720 Lumens n Precision anti-reflective coated optics n Operating modes: DMX 512, stand alone and master/slave n DMX Channels: 12 n DMX Connectors: 3 pin XLR In/Out n Digital display menu system for addressing and fixture settings n Remote reset n Forced air ventilation n Dual carrying handles n Quick lock adaptor mount with 1/2" clamp hole n Power consumption: 170W n Power input: autoswitching 90-240vAC 50/60hz n Size: 15.8"H x 12.8"W x 9.8"D n Weight: 8.5 kgs /18.7 lbs n Color: Black Classe LED Spot 200 DM-LS200 Specifications: Light Source: Single 180W LED n Light source life: average 60,000 hours n Color Temperature: 6,500K n Beam angle: 15 degrees n Control Channel: 14,16, 20 channels n Pan 540° (630° optional) Tilt 265° (16 bit) n Advanced Moving System: Fast, stable and quiet, auto X-Y repositioning n Color Wheel: 8 dichroic filters+open, Rainbow effect n Rotating Gobo: 7 interchangeable, rotating, indexable, gobos+open n Static Gobo: 7 interchangeable, static, indexable, gobos+open n Rotating Effect Wheel: 3 facets prism n Motorized focus n Shutter: Variable from 1-13 flashes or random strobe n Dimmer: 0-100% full range dimming n Motorized focus n Shutter variable from 1-125 flashes or random strobe n Iris: Motorized linear change from 5%-100% n Frost: 0-100% n 8 pre-built programs can be selected n Energy Saving Mode n Software upgrade via DMX cable n DMX Connectors: 3 pin and 5 pin XLR In/Out n Fan automatically control function: According to the airframe temperature, the fan will automatically adjust its speed in order to cool and reduce noise n Wireless receiver preinstalled: No signal cable connection and trouble shooting on defective cables, Signal transmission is very stable and without interference, Effective distance within 1 km/.62 miles n Power input: 100-240vAC 50/60Hz n Size: 12.13" x 14.7" x 18.7" n Weight: 15.5 kgs/34.1 lbs n Color: Black 18 www.techni-lux.com Specifications are subject to change without notice. Digital Moving Light Classe LED Wash Z20 Specifications are subject to change without notice. DM-LS60 Specifications: Light Source: Single 50W n Light source life: average 100,000 hours n Color Temperature: 6,500K n Beam angle: 14 degrees with a selection 8 pre-built programs n Control Channel: 14 channels n Pan 540°(630° optional ) Tilt 265° (16 bit) n Advanced Moving System: Fast, stable and quiet, auto X-Y repositioning n Color Wheel: 8 dichroic filters+open, Rainbow effect n Rotating Gobo: 7 interchangeable, rotating, indexable, gobos+open n Rotating Effect Wheel: 3 facets prism + 3D prism + frost filter n Motorized focus n Shutter: Variable from 1-25 flashes or random strobe n Dimmer: 0-100% full range dimming n Frost: Fine wash effect n 4 digit LED display: Locked automatically after 15 seconds from the last button press to prevent incorrect operation, long press menu button for 3 seconds to activate keys again. n Energy Saving Mode n Software upgrade via DMX cable n Control input: DMX 512 input/output signal 3 and 5 pin n Fan automatically control function: According to the airframe temperature, the fan will automatically adjust its speed in order to cool and reduce noise n Power: 100-240vAC 50/60Hz n Size: 11.8" x 8.7" x 15.8" n Weight: 11 kgs/24.2 lbs n Color: Black TRACKER Beam 2R IL-TRACKER2R/B The high performance TRACKER Beam 2R is our most compact beam effect moving light. The Platinum 2R lamp is bright and the light output is sharp and uniform with a fast and smooth X/Y movement. Intelligent LCD display menu controls for easy settings navigation. Specifications: Light source: Platinum 2R 132W, 8000k n Light source life: average 3000 hours n Lamp wattage: 132 watts n Pan/Tilt movement range: 540/270 degrees n Smooth 16 bit pan/tilt movement n Self-correcting position of pan/tilt n Beam angle: 4 degrees n Motorized focus n Color wheel with 15 dichroic colors plus bi-colors n Frost wash effect n Fixed gobo wheel with 17 gobos plus open n Rotating facet prism n Variable strobe effect shutter n Mechanical dimming from 0-100% n Remote reset and lamp on/off control n Overheat protection n Operation modes: run standalone, DMX, or sound active n LCD Display control settings with jog wheel for addressing and fixture settings n DMX Channels: 20 n DMX Connectors: Both 3 and 5 pin XLR Male/Female n Approvals: CE n Insulation Rating: IP20 n Power consumption: 350W n Power: 110-240vAC 50/60hz n Maximum Dimensions: 19.75" x 13.6" x 11.9" n Weight: 15 kgs / 33 lbs n Color: Black Digital Moving Light Classe LED Spot 60 TRACKER 280 Spot Beam IL-TRACKER280/SB The high performance TRACKER 280 Spot Beam has both a spot and narrow beam effect; from an impressive super narrow 2.5 degrees to a 25 degree spot. The high power light output is sharp and uniform with smooth pan and tilt movement. Intelligent LCD display menu controls for easy navigation. Classe 300 Spot IL-CLASSE300S Specifications: Light Source: MSR Gold 300/2 FastFit lamp n Light source life: average 750 hours n Color Temperature: 8,000K n Remote lamp on/off via DMX n Pan/Tilt: Pan 540°(optional 630°) Tilt 265° (16 bit) n Color Wheel: 8 interchangeable colors + white n Advanced CMY color mixing n 30 CMY and color wheel Macros and Random CMY n Slot in and out gobo/color wheel n Indexable rotating gobo wheel: 6 gobos + open n Static gobo wheel: 7 interchangeable, indexable, gobos +open n Effect Wheel: 3 facets prism, 3D prism and frost filter n Iris: Motorized linear change from 5%-100% n Mechanical shutter n Motorized focus n Dimmer: 0-100% n Strobe: 0-13 flash/second, random strobe n DMX Connectors: 3 pin 5 pin XLR In/Out n 22 DMX channels n Operating modes: remote DMX addressing, sound control switch by controller n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD color graphic display n Wireless receiver pre-installed n Power input: 100-240vAC 50/60Hz n Electronic ballast n Size: 19.7" x 14.17" x 20.12" n Weight: 28 kgs/61.7 lbs n Color: Dark Gray www.techni-lux.com M o v i n g Hea ds Specifications: Light source: 280W, 8000k n Light source life: average 2,000 hours n Lamp wattage: 280 watts n Pan/Tilt movement range: 540 / 270 degrees n Smooth 16 bit pan/tilt movement n Self-correcting position of pan/ tilt n Beam angle: linear motorized zoom from 2.5 to 25 degrees n Motorized focus n Invertable display n Color wheel with 13 dichroic colors plus bi-colors and open n Rotating gobo wheel with 9 patterns plus open n Fixed gobo wheel with 14 gobos plus open n Rotating 6 facet linear and 8 facet prisms n Variable strobe effect shutter n Linear frost wash effect n Mechanical dimming from 0-100% n Remote reset and lamp on/off control n Overheat protection n Operation modes: run standalone, DMX, or sound active n LCD Display control settings with jog wheel for addressing and fixture settings n DMX Channels: selectable 16 or 25 n DMX Connectors: Both 3 and 5 pin XLR Male/Female n Approvals: CE n Insulation Rating: IP20 n PowerCon power input n Power consumption: 470W n Power: 110-240vAC 50/60hz n Size: 23.2" x 14.4" x 15.15" n Weight: 19 kgs / 41.8 lbs n Color: Black 19 IL-CLASSE300B Specifications: Light Source: MSR Gold 300/2 FastFit lamp n Light source life: average 750 hours n Color Temperature: 8,000K n Remote lamp on/off via DMX n Pan/Tilt Pan 540°(optional 630°) Tilt 265° (16 bit) n Color Wheel: 8 interchangeable dichroic filters + white n Advanced CMY color mixing n 30 CMY and color wheel Macros and Random CMY n Slot in and out gobo/color wheel n Indexable rotating gobo wheel: 6 gobos + open n 1 rotating and indexable prism (3 facets) n Frost from 0 to 100% n Sync with music n Dimmer: 0-100% n Mechanical shutter n Strobe: 0-13 flash/second, random strobe n DMX Connectors: 3 pin 5 pin XLR In/Out n DMX Channels: 16, 18, 26 n Operating modes: remote DMX addressing, sound control switch by controller n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD color graphic dsiplay n Wireless receiver pre-installed effective distance within 1 km/1000 m n Power: 100-240vAC 50/60Hz n Electronic ballast n Size: 19.7" x 14.17" x 20.12" n Weight: 25 kgs/55 lbs n Color: Black Classe 700 Spot IL-CLASSE700S Specifications: Light Source: MSR Gold 700/2 MiniFastFit (7,200K) n Light source life: average 750 hours n Pan/Tilt: Pan 540° (optional 630°) Tilt 265° (16 bit) n Advanced moving system: Fast, stable and quiet n Auto X-Y repositioning n CMY color mixing and speed can be adjusted n Color wheel: 8 dichroic filters + open n Rainbow effect n 30 CMY + CTO + Color macros and random CMY n 2 rotating gobo wheels n 6 interchangeable, rotating, indexable gobos + open n Slot in/out color/gobo wheel system n Animation wheel can make flame or water effect n Three face rotating prism n Motorized focus n Strobe: 0-13 flash/second or random n Dimmer: 0-100% n Iris: Motorized linear change from 5%-100% n 14°-32° linear zoom n Frost has wash effect n 8 pre-built programs n Electronic ballast with flicker-free lamp n DMX Connectors: 3-pin 5-pin XLR In/Out n DMX channels: 14,16,23 n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD color graphic display n Wireless receiver pre-installed effective distance within 1 km/1000 m n Power input: 100-230vAC 50/60Hz n Size: 18.5" x 14.5" x 20.3" n Weight: 32 kgs/70.4 lbs n Color: Black Classe 700 Wash IL-CLASSE700W Specifications: Light Source: MSR Gold 700/2 MiniFastFit (7,200°K) n Light source life: average 750 hours n Pan/Tilt: Pan 540°(optional 630°) Tilt 265° (16 bit) n Advanced moving system: Fast, stable and quiet n Auto X-Y repositioning n CTO: Color temperature linear change from 2700-6500K n CMY color mixing and speed can be adjusted n Color wheel: 8 dichroic filters + open n Rainbow effect n 30 CMY + CTO + Color macros and random CMY n "Slot in&out" color/gobo wheel system n Dimmer: 0-100% n Frost has wash effect n 8 pre-built programs can be selected n Electronic ballast with flicker-free lamp n Light source life: average n DMX Channels: 14-16-23 n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD color graphic dsiplay n Wireless receiver pre-installed effective distance within 1 km/1000 m n Power input: 100-230vAC 50/60Hz n Size: 18.5"x14.5"x20.3" n Weight: 31 kgs/68.2 lbs n Color: Black Classe 700 Beam IL-CLASSE700B Specifications: Light Source: MSR Gold 700/2 MiniFastFit (7,200K) n Light source life: average 750 hours n Color temperature linear change from 2700-6500K n Remote lamp on/off via DMX n Pan/Tilt Pan 540°(optional 630°) Tilt 265° (16 bit) n Advanced moving system: Fast, stable and quiet n Auto X-Y repositioning n CMY color mixing and speed can be adjusted n Color wheel: 8 dichroic filters + open n Rainbow effect n 30 CMY + CTO + Color macros and random CMY n “Slot in&out” color wheel system n 6 interchangeable, rotating, indexable gobos + open n 7 interchangeable, indexable gobos + open n Motorized focus n Strobe: 0-13 flash/second or random n Dimmer: 0-100% n Three face rotating prism n Filtro frost n Beam angle: 5°, parallel and strong beam effect, 8 pre-built programs can be selected n Mechanical shutter n Electronic ballast with flicker-free lamp n DMX Connectors: 3 pin 5 pin XLR In/Out n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD color graphic dsiplay n Wireless receiver preinstalled effective distance within 1 km/1000 m n Power input: 100-230vAC 50/60Hz n Size: 18.5" x 14.5" x 20.3" n Weight: 29 kgs/63.8 lbs n Color: Black 20 www.techni-lux.com Specifications are subject to change without notice. Moving Heads Classe 300 Beam Classe 575 Wash Specifications are subject to change without notice. Specifications: Light Source: MSR 575/2 lamp n Light source life: average 1,000 hours n Color Temperature: 7,200K n Remote lamp on/off via DMX n Pan/Tilt: Pan 540° (optional 630°) Tilt 265° (8/16 bit) n Pan Tilt speed control n Automatic Pan Tilt repositioning n Color wheel: 7 dichroic filters + white n Rainbow effect n Adjustable rotation speed n Advanced CMY color mixing n 2 color temperature correction filters n Pre-built color effects n automatic operation master and slave n Sync with music n 8 pre-built programs n 48 programmable scenes n Color change with blackout n Effect wheel: beam shaper and frost filter n Motorized zoom 7° 28° n Dimmer: 0-100% n Mechanical shutter n Strobe: 0-13 flash/second n DMX Connectors: 3 pin 5 pin XLR In/Out n DMX Channels: 14, 16, 22 n Auto test all functions n Display the value of each DMX channel n Display “flip” function 180° rotation n Power input: 120-230vAC 50/60Hz n Size: 18.5" x 14.5" x 20.3 n Weight: 33 kgs/72.6 lbs n Color: Black Classe 575 Spot IL-CLASSE575S Specifications: Light Source: MSR 575/2 lamp n Light source life: average 1,000 hours n Color Temperature: 7,200K n Remote lamp on/off via DMX n Pan/Tilt: Pan 540° (optional 630°) Tilt 265° (8/16 bit) n Pan Tilt speed control n Automatic Pan Tilt repositioning n Color wheel: 8 colors + white n Rainbow effect n Adjustable rotation speed n Indexable rotating gobo wheel: 6 gobos + open n Different speed gobo shake n Rainbow effect n Static gobo wheel: 7 gobos + open n Gobo shaking with different speed n Automatic operation master and slave n Sync with music n 8 pre-built programs n 48 programmable scenes n Color or Gobo change with blackout n 1 rotating indexing prism (3 facets) n Number of scenes in Program Run can be changed individually n Iris: 5%-100% with pulse effect n Linear Frost n Electronic focus n Step zoom 18° 21° 24° n Dimmer: 0-100% n Mechanical shutter n Strobe: 0-13 flash/second n DMX Connectors: 3-pin 5-pin XLR In/Out n DMX Channels: 15, 17, 22 n Auto test all functions n Display the value of each DMX channel n Display “flip” function 180° rotation n Power input: 120230vAC 50/60Hz n Size: 18.5"x14.5"x20.3 n Weight: 38 kgs/83.6 lbs n Color: Black M o v i n g He ads IL-CLASSE575W Classe BS2 Beam IL-BS2 Specifications: Light Source: Philips Platinum 5R (8,000K) n Light source life: average 2,000 hours n Pan/Tilt: Pan 540° (optional 630°) Tilt 265° (16 bit) n 8 interchangeable, rotating, indexable, gobos + open n Color wheel: 12 dichroic filters + open n Rainbow effect n 8 face prism and micro prism n Automatic operation master/slave n Sync with music n 8 pre-built programs n Strobe 1-15 flash/second and pulse effect n Dimmer: General dimming and blackout for all four colors n Frost: Linear 0-100% n DMX 512 input/output signal 3 and 5 pin n DMX Channels: 11, 13, 16 n Operating modes: remote DMX addressing, sound control switch by controller n Rechargeable back up battery n Settings viewable on display, even with fixture off n LCD color graphic display n Wireless receiver pre-installed effective distance within 1 km/1000 m n Power input: 100-240vAC 50/60Hz n Power Consumption: 380W n Size: 14.1" x 13.2" x 17.3" n Weight: 12 kgs/26.4 lbs n Color: Black IDEA Spot 300 IL-IDEA300SPOT The Idea Spot 300 has the feature set and performance typically expected only from larger class moving lights. Among the features is an electronic ballast which ensures a flicker-free operation and makes the unit lighter in weight. Its linear zoom, enables the beam of light to be remotely adjusted from 16 to 35 degrees. The Idea Spot 300 also includes an onboard DMX wireless receiver, allowing the use of the fixture without running data cables. Additional effects include a CMY color mixing system, seven interchangeable gobos and an effect wheel. Idea Spot 300 is able to meet an endless variety of creative requirements. Using the MSR300 Fast Fit lamp makes it very simple to change the lamp; just twist, remove and replace with new lamp. Specifications: Light source: MSR Gold 300/2 FastFit lamp (8,000K) n Light source life: average 750 hours n Linear zoom from 16°- 35° n Color wheel with 8 interchangeable colors + white n Advanced CMY color mixing n 30 CMY and color wheel MACROS and Random CMY n Interchangeable gobo/color wheel system n Indexable rotating gobo pattern wheel with 6 gobos plus open n Static gobo wheel with 7 gobo, interchangeable, indexable plus open n Effect Wheel: 3 facet prism, 3D prism and frost n Iris Motorized linear change from 5%-100% n Motorized focus n Linear dimmer intensity from 0 to 100% n Shutter & Strobe 1-13 flashes/second random strobe n Pan/Tilt: Pan 540°(optional 630°) Tilt 265° (16 bit) n DMX Connectors: 5-pin XLR In/Out n DMX Channels: 22 n Wireless DMX receiver installed on-board (requires a DMX transmitter sold separately) n Operating modes: remote DMX addressing n Sound mode control from controller n LCD display n Internal rechargeable battery for settings and viewing display when fixture is not powered n Remote lamp on/off via DMX n Quick and easy lamp replacement n Power input: 120vAC 50/60HZ, Electronic ballast n Current draw: 5 amps n Size: 20.12" x 14.17" x 16.93" n Weight: 28 kgs/61.73 lbs www.techni-lux.com 21 IL-IDEA700SPOT Light and easy to handle, with its 700W lamp Idea Spot 700 produces a concentrated, steady and very bright beam. Like fixtures of a higher class, Idea Spot 700 has technically avant-garde features, such as an electronic ballast (which makes the unit flicker-free and lighter), a linear zoom that ensures fast precise beam aperture from 14° to 40° and a CMY color mixing system. Perfect for lighting even far-off areas with intense colors and clear-cut effects, Idea Spot 700 is even more practical thanks to its back-up battery, which enables settings to be seen on the unit’s display even when it is switched off. Its wireless DMX interface (fitted as standard) eliminates troublesome cable runs between the fixture and its control unit, greatly facilitating installation and use. Specifications: Light source: MSR Gold 700 SA/DE lamp (7,500K) n Light source life: average 750 hours n Linear zoom from 16°- 35° n Color wheel with 8 interchangeable colors + white n Advanced CMY color mixing n 30 CMY and color wheel MACROS and Random CMY n Interchangeable gobo/color wheel system n 2 Indexable rotating gobo pattern wheel with 6 gobos plus open n Animation Wheel n Effect Wheel: 3 facet prism, 3D prism and frost n Iris Motorized linear change from 5%-100% n Motorized focus n Linear zoom 14° 40° n Shutter & Strobe 1-13 flashes/ second random strobe n Pan/Tilt: Pan 540° (optional 630°) Tilt 265° (16 bit) n DMX Connectors: 5-pin XLR In/Out n DMX Channels: 34 n Wireless DMX receiver installed on-board (requires a DMX transmitter sold separately) n Operating modes: remote DMX addressing n Sound mode control from controller n LCD display n Internal rechargeable battery for settings and viewing display when fixture is not powered n Remote lamp on/off via DMX n Quick and easy lamp replacement n Power input: 120vAC 50/60HZ n Electronic ballast n Current draw: 9 amps n Size: 23.6" x 20.9" x 22.8" n Weight: 39 kgs/86 lbs n Colors: Black RED DMX Console CT-REDMX The compact Red DMX Console has six DMX universes directly on the controller, 3072 configurable channels and a GUI designed for easy programming. Control up to 576 cue lists with a maximum of 999 cues each and 12 keys offer direct access to playback and programming functions. The console has a 7-inch TFT touch screen color display, LCD digital keys, and 4 encoder wheels. Controllers Specifications: 7" Color TFT Touch Screen Display 800 x 480 pixels n 2 Rear-lit 72-digit (2 lines of 36) LCD screen for the display of fader configuration n 12 direct access keys for playback and programming functions n 12 faders with individual keys playback freely programmable as master/group master/manual cue n 24 keys for direct access to playback registers n 4 encoder wheels for controlling attributes during programming and effects during playback n Jog Ball for PAN/TILT control with “locks” and “fine” buttons n Grand Master fader + DBO key n Round keys fine control n Internal SD memory n Powerful GUI for easy programming and control of a maximum of 576 Cue lists, each with a maximum of 999 Cues n DMX Channels: 2048 (expandable up to 3072) n 4 DMX Out lines: 1 DMX In line (independent), 2 universe on XLR 5 and 3 pin (up to 6 universe 3072 channel on artnet) n Playback of a maximum of 24 cue-lists simultaneously n Advanced shape engine n Updateable personality library n 6 families of Palettes for rapid control of the automated fixtures’s functions n Palette Chris/Gam/Lee Rosco pre-programmed available on all kind of projector either RGB and CMY n Cues: max 999 for each playback register n Maximum number of cues storable per show: 9999 n 2 flexible LED lights n Universal 82-265 Volt onboard switching power supply n Connection: 2 XLR connector 5 pin: DMX out, 2 XLR connector 3-pin: DMX out, 1 RJ45 connector: artnet, 1 XLR connector 5 pin: DMX in, 1 XLR 3 connector pin: SMPTE in, 3-pin connector: Midi In/Out/Thru, 1 USB connector: for backup on external USB mass storage, 2 USB connector for light, 2 extension connector n Size: 26.3" x 12.1" x 3.9" n Weight: 12 kgs/26.4 lbs 22 RED DMX Extension Wing with 12 faders and 36 buttons CT-REDMXE Specifications: Rear-lit 72-digit (2 lines of 36) LCD screen for the display of playback configuration n 12 completely configurable scene control faders n 36 keys for direct access to Playbacks n Power supply directly from main board n Size:12.1" x 14.3" x 3.9" n Weight: 5 kgs/11 lbs For further information on Controllers, please visit our website www.techni-lux.com www.techni-lux.com Specifications are subject to change without notice. Moving Heads IDEA Spot 700 ANSER® Lamp Sets Specifications are subject to change without notice. The ANSER® by Littlite may look familiar but we’ve included some very unique features designed to make the ANSER the most powerful, versatile and energy efficient compact task light . The ANSER uses a single, warm white LED coupled with CC (Constant Current) dimming circuitry and lineal (end-out) gooseneck configuration. The CC circuitry converts input voltage of 5-28vdc and feeds 12-Volt to the LED. Power the ANSER from Littlite's standard 12-Volt external power supply (included) or any other source of 5-28vdc power. The ANSER can be powered from most USB ports.* Assembly Configurations: The ANSER is available as a free standing Desk Light built into a modified cast weighted base or as a lampset capable of a variety of mounting applications and compatible with all mounting accessories including the Littlite's MP-III flush mount plate. Applications: ideal for illuminating into confined spaces and onto workspaces and reading materials. Available with a 12, 18 or 24-inch gooseneck. * USB operation subject to available current at USB port. Orchestra LED Music Light GL-MBOL Mighty Bright’s Orchestra Light is the brightest in the business. The sleek, black music stand light blends in, tasteful and understated, and comes with a convenient travel case. The long head features a row of nine brilliant LEDs, and a tap power button that offers two light level options. Set at the higher level to brighten up to four pages of sheet music. A discrete back fin directs light away from the audience and back to the sheet music. This stylish light is seriously sturdy, from clip to bulbs. The extra broad clip is a Mighty Bright exclusive design, with a powerful grip set on a broad base. The gooseneck is robust but allows user to make precise adjustments easily, even during performance. Its energy-efficient LEDs are not only sturdy enough to withstand the rigors of tear down and travel they also heighten the contrast of the notes and words on sheet music, for more comfortable, accurate reading. Specifications: Light source: 9 white LEDs n 54 lumens n Light source life: average 100,000 hours n two brightness levels n Optical grade lens spreads light evenly n Flexible gooseneck n Padded clip opens extrawide n Stable free-standing base n AC Port n Durable travel bag (included) n 3 AA batteries (included) n Average battery life: 16+ hours n AC adapter with 13 foot/4 meter power cord (included) n Size: 1.5" x 16.5" x 8" n Weight: 0.122 kgs/0.27 lbs G o o s e n e c k & Ta s k L i g h t s GL-ANTE12LED GL-ANTE18LED GL-ANTE24LED Encore LED Music Light GL-MBEN The Encore Light is a miniature version of our popular Orchestra Light. Featuring a similarly sleek body design, the Encore's light bar contains six bright white, energy-efficient LEDs, along with an integrated back fin to shield the brilliant light from the audience. The Encore's head has a sliding power switch which offers two brightness levels. With a signature Mighty Bright clip and a flexible gooseneck, the Encore epitomizes music light perfection. For added convenience, the Encore light comes with an AC adapter and a black Mighty Bright travel bag. Start practicing - with our Encore Light you will be playing long into the night! Specifications: Light source: 6 white LEDs n 28 lumens n Light source life: average 100,000 hours n Two brightness levels n Optical grade lens spreads light evenly n Flexible gooseneck n Padded clip opens extrawide n AC Port n Durable travel bag (included) n 3 AAA batteries (included) n Average battery life: 5+ hours n AC adapter with 13 foot/4 meter power cord (included) n Size: 12.75" x 6" x 1.75" n Weight: 0.122 kgs/0.27 lbs Hammerhead LED Music Light GL-MBHH The fiercest, most powerful light ever, the HammerHead LED Light derives its moniker from its distinctive light bar. Use its six LEDs in one of two brightness settings to scare away the darkness. With the intense bright white light you've come to expect from Mighty Bright, the HammerHead packs a punch in its small frame. Its size is a bit more compact then the Encore and the light is less spread out. No need to be intimated by the beast - this one requires no maintenance. With LEDs that last 100,000 hours, included batteries, and an optional AC adapter, you won't tire out the mighty HammerHead any time soon. So position that light bar just where you want it, press that button, and illuminate! For added convenience, the Hammerhead light comes with batteries, and a black Mighty Bright travel bag. Specifications: Light source: 6 white LEDs n 28 lumens n Light source life: average 100,000 hours n Two brightness levels n Optical grade lens spreads light evenly n Flexible gooseneck n Padded clip opens extra-wide n AC Port n Durable travel bag (included) n 3 AAA batteries (included) n Average battery life: 9.5+ hours n AC adapter sold separately n Size: 12" x 3" x 1.75" n Weight: 0.06 kgs/0.13 lbs www.techni-lux.com 23 GL-MBXF2 Low-lit venues leave you squinting helplessly at your music sheet or playlist? The XtraFlex2 LED Music Light won’t leave you in the dark – this breakthrough music stand light harnesses the astonishing brilliance of two LEDs, making it the brightest of our single gooseneck designs. Bright, yes, but unlike incandescent bulbs LEDs actually increase the contrast of the words and notes on your sheet, making for a far more comfortable read. Set the intensity by pressing the button once or twice. Clip and twist to set the perfect angle, the gooseneck obeys your every whim. The clip opens extra wide to keep your hands free when it matters most. If the battery runs low, plug it in and play on. Specifications: Light source: 2 white LEDs n 12 lumens n Light source life: average 100,000 hours n Use one or two LEDs by tapping button n Two level switch n Optical grade lens spreads light evenly n Flexible gooseneck arm folds into compact storage position n Free-standing base n Padded clip opens extra-wide n Durable gig bag included n AC Port n 3 AAA batteries (included) n Average battery life: 28+ hours n Optional cradle base (not included) n Size: 12.5" x 1.5" x 1.75" n Weight: 0.065 kgs/0.14 lbs n Color: Black Stage, Console GL-MBSP and Pedal Board Light We can’t all play like Hendrix, but the Stage and Pedal Board Light will at least keep you from mixing up your wah-wah and overdrive pedal settings. Guitarists, along with DJs, pro audio technicians, and production managers, will appreciate the option of white and red LEDs. Use white for high-contrast lighting, best for reading sheet music and play lists in dim venues. Switch to red to create unobtrusive night vision while you work the stompbox or spin. Each color offers two light levels. If you need to, activate both colors at the same time – orient the two flexible goosenecks any which way that works best. A hook & loop mounting strip comes included, so the Pedal Board Light will hold steady while you rock out. Specifications: Light source: 2 white, 2 red LEDs (8 light level combinations) n Light source life: average 100,000 hours n Two separate, flexible goosenecks n Red light eliminates refractive washout n Red LEDs allow eyes to adjust more rapidly to dark lighting environments n 16 lumens n Two tap-on sensor switches n Optical grade lens spreads light evenly n Arms fold into compact storage position n Free-standing base n Padded clip opens extra-wide n Hook & Loop mounting strip n AC Port n Three AAA batteries (included) n Average battery life: 20+ hours n Size: 13.5" x 1.5" x 1.75" n Weight: 0.104 kgs/0.23 lbs n Color: Black Duet2 Deluxe Set LED Music Light GL-MBDT2 Whether you are in the recording studio, at a performing art center, or in a multipurpose room, the best performance demands the best equipment. The Duet2 LED Music Light enhances one of our most popular models with features that benefit orchestras, bands, and any performers who play under controlled lighting. Two separate flexible goosenecks are outfitted with two LEDs each, providing up to four possible light levels. Offering twice the intensity of the Duet, the Duet2 brightens two to three pages of sheet music. Tap-on power buttons make it easier for musicians to prep quickly for performance. This professional grade music stand light is ideal for those who leave nothing to chance; use the optional AC adapter to keep the music coming, encore after encore. Specifications: Light source: 2 white LEDs per gooseneck n Light source life: average 100,000 hours n Two flexible goosenecks n 24 lumens n Two switches control up to four lighting levels n Optical grade lens spreads light evenly n Arms fold into compact storage position n Free-standing base n Padded clip opens extra-wide n AC Port n Uses three AAA batteries (not included) n Average battery life: 20+ hours n AC adapter with 13 foot/4 meter power cord (included) n Size: 13.5" x 1.5" x 1.75" n Weight: 0.10 kgs/0.22 lbs n Color: Black Duet LED Music Light GL-MBDT The Duet LED Music Light garners praise from musicians, to FOH mixers, to systems techs – it’s that good. This is the must-have music stand light for low-light, high-intensity situations, when you have to get everything right. Create the swath of light you need by pushing, pulling, bending and twisting two separate, entirely flexible arms to any orientation. Flick on one or two heads. One energy-efficient LED is dazzling enough; two saturate your music sheets or sound board with non-glaring light. Base is super-compact but weighted to maintain its balance when free standing. An optional cradle base ensures rock-solid stability. The clip opens wide enough to hang tough from a music stand, laptop, table edge or other surface. When you are ready to wrap it up, the gooseneck arms can be bent into any position to stow away with your music gear. Specifications: Light source: 2 white LEDs n Light source life: average 100,000 hours n 12 lumens n Two flexible goosenecks n Individual switches to control lighting level n Precisely engineered optical grade lens spreads light evenly n Arms fold into compact storage position n Free-standing base n Padded clip opens extra-wide n 3 AAA batteries (included) n Average battery life: 28+ hours n Size: 13.5" x 1.5" x 1.75" n Weight: 0.086 kgs/0.19 lbs n Color: Black 24 www.techni-lux.com Specifications are subject to change without notice. Gooseneck & Task Lights XtraFlex2 LED Music Light GL-MBUSB1W Specifications are subject to change without notice. When you don’t enough lighting for your laptop–supply your own! The LED USB Light uses no cord and no batteries, just a standard USB port. The gooseneck and light head measure 12" and easily reach from the laptop’s side or rear port to brighten your keyboard or paperwork. Bend the gooseneck to any angle you need a bright radius of crisp, white LED lighting. The single LED model is ideal use in low-light backstage areas. The LED USB Light folds to an ultra-compact shape for a computer bag or handbag. LEDs are rugged and energy efficient, a great value for a durable light source. Specifications: Light source: 1 white LED n 7 lumens n Light source life: average 100,000 hours n Precisely engineered optical grade lens spreads light evenly n Flexible gooseneck allows positioning of light source n Fits any standard USB port n No batteries required, powered by the USB port n Size: 13.75" x 0.25" x 0.5" n Weight: 0.0255 kgs/0.056 lbs 2LED USB Gooseneck Light - 2 GL-MBUSB2R red LED We're seeing red...light, that is. The 2 LED USB Red Light is an innovative spin on our popular and rugged 2 LED USB Light. With 2 red LEDs, this model is designed for performers, professional DJs, production managers, light and sound technicians and law enforcement vehicles. Why red? Of course, red LEDs look cool, but we also chose red to eliminate night blindness and enable your eyes to adjust more rapidly in dark lighting environments. We know you're working hard, and the last thing you want to worry about in the middle of a performance is refractive washout caused by white light and smoke. So pick up our 2 LED USB Red Light, pack it in your laptop case, and get on the road! Used in police and law enforcement vehicles to reduce visibility into the vehicle from outside viewers. Specifications: Light source: 2 red LEDs n Light source life: average 100,000 hours n Illuminates for improved night vision n Durable LEDs lessen eye strain and never need replacing n 12 lumens n Precisely engineered optical grade lens spreads light evenly n Flexible gooseneck holds light in place n Folds into ultra-compact shape n Fits any standard USB port n No batteries required, powered by the USB port n Size: 13.75" x 0.25" x 0.5" n Weight: 0.0255 kgs/0.056 lbs 2LED USB Gooseneck Light - 2 GL-MBUSB2W white G o o s e n e c k & Ta s k L i g h t s LED USB Gooseneck Light - 1 white LED LED Squinting at your finger placement in low light makes you wonder, “What good is a laptop I can’t use?” The 2 LED USB Light is a portable computer light that plugs into a standard USB port. This model is the brightest in our USB line and it’s serious about helping you focus. Two LEDs shine a mini spotlight across your keyboard, paperwork, and that cup of coffee you’ll need if you’re working late again. The gooseneck is totally flexible and folds up into any compact shape for your computer bag or hand bag. LEDs are rugged and energy efficient, making the light a sound investment in your laptop – more necessity than accessory. You’ll be using your laptop the way you always imagined, that is, whenever you want. Specifications: Light source: 2 white LEDs n 12 lumens n Light source life: average 100,000 hours n Precisely engineered optical grade lens spreads light evenly n Flexible gooseneck allows positioning of light source n Folds into ultra-compact shape n Fits any standard USB port n No batteries required, powered by the USB port n Size: 13.75" x 0.25" x 0.5" n Weight: 0.0255 kgs/0.056 lbs Mighty Bright AC Adapter 4.0v 100ma US and EURO Save money on batteries! Lightweight and long power cord allows you to plug in and use your Mighty Bright just about anywhere. Specifications: Power input: 120V 60Hz 2.5W, American edison 2 prong plug n Output: 4V DC Current: 400mA Max n Cord length: 6 feet / 1.8 meters n Works with all Mighty Bright AC ports (available on selected models n Not compatible with Floor Light and Magnifier n Size: 2" x 1.5" x 1.5" n Weight: 0.054 kgs/0.12 lbs n Color: Black GL-MBAC GL-MBACE Mighty Bright Light Cradle - Black GL-MBLC Use your Mighty Bright as a free standing light with this attachment, or secure it to any metal surface with its strong magentic base. For use with Mighty Bright XtraFlex, XtraFlex 2, XtraFlex Duet, Duet2, Pedal Board, Mini and/or Vusion lights. Specifications: A wide base that holds your light in a secure, stand-up position n Attaches and detaches to the base of the light with a springloaded clip n Large floating magnet on bottom for securing to metal surfaces n Clips to music stands n Four non-skid rubber feet n Use with XtraFlex, XtraFlex2, Duet, Duet2, DoubleFlex, Navigation, Vusion and Pedal Board lights n Size: 4" x 2-3/4" x 3/4" n Weight: 0.04 kgs/0.09 lbs n Color: Black www.techni-lux.com 25 CO-XLR3FNS-N CO-XLR3MNS-N CO-XLR4FNS-N CO-XLR4MNS-N CO-XLR5FNS-N CO-XLR5MNS-N NC3FXX XLR Cable End XX Series 3-pin Female - nickel/silver NC3MXX XLR Cable End XX Series 3-pin Male - nickel/silver NC4FXX XLR Cable End Female 4-pin - nickel/silver NC4MXX XLR Cable End Male 4-pin - nickel/silver NC5FXX XLR Cable End Female 5-pin - nickel/silver NC5MXX XLR Cable End XX Series - Male 5-pin - nickel/silver CO-XLR3FBG-N CO-XLR3MBG-N CO-XLR4FBG-N CO-XLR4MBG-N CO-XLR5FBG-N CO-XLR5MBG-N NC3FXX-B XLR Cable End XX Series 3-pin Female - black/gold NC3MXX-B XLR Cable End XX Series 3-pin Male - black/gold NC4FXX-B XLR Cable End Female 4-pin - black/gold NC4MXX-B XLR Cable End Male 4-pin - black/gold NC5FXX-B XLR Cable End Female 5-pin - black/gold NC5MXX-B XLR Cable End XX Series - Male 5-pin - black/gold CO-XLR3FBS-N CO-XLR3MBS-N CO-XLR4FBS-N CO-XLR4MBS-N CO-XLR5FBS-N CO-XLR5MBS-N NC3FXX-BAG XLR Cable End XX Series 3-pin Female - black/silver NC3MXX-BAG XLR Cable End XX Series 3-pin Male - black/silver NC4FXX-BAG XLR Cable End Female 4-pin - black/silver NC4MXX-BAG XLR Cable End Male 4-pin - black/silver NC5FXX-BAG XLR Cable End Female 5-pin - black/silver NC5MXX-BAG XLR Cable End XX Series - Male 5-pin - black/silver CO-XLR3MNS-N CO-XLR3FBG-N CO-XLR5MBS-N Heavy Duty IP XLR Connectors CO-XLR3FSSG-N CO-XLR3MSSG-N CO-XLR4FSSG-N CO-XLR4MSSG-N CO-XLR5FSSG-N CO-XLR5MSSG-N NC3FX-HD XLR Cable End X-HD Series 3-pin Female - stainless/gold NC3MX-HD XLR Cable End X-HD Series 3-pin Male - stainless/gold NC4FX-HD XLR Cable End Female 4-pin HD - stainless/gold NC4MX-HD XLR Cable End X-HD Series 4-pin Male - stainless/gold NC5FX-HD XLR Cable End X-HD Series 5-pin Female - stainless/gold NC5MX-HD XLR Cable End X-HD Series 5-pin Male - stainless/gold CO-XLR5FSSG-N CO-XLR3FBGO-N CO-XLR3MBGO-N CO-XLR3FNGO-N CO-XLR3MNGO-N NC3FXX-HD-B-D XLR Cable End XX-HD Series 3-pin Female black chrome/gold with rubber jacket. IP67 rated; bulk NC3MXX-HD-B-D XLR Cable End XX-HD Series 3-pin Male black chrome/gold with rubber jacket. IP67 rated; bulk NC3FXX-HD-D XLR Cable End XX-HD Series 3-pin Female nickel/gold with rubber jacket. IP67 rated; bulk NC3MXX-HD-D XLR Cable End XX-HD Series 3-pin Male nickel/gold with rubber jacket. IP67 rated; bulk CO-XLR5MSSG-N CO-XLR3MBGO-N Special XLR Connectors CO-XLR3FMNG-N CO-XLR3FMBG-N NC3FM-C XLR Cable End convertCON Unisex Female/Male - nickel/gold NC3FM-C-B XLR Cable End convertCON Unisex Female/Male - black/gold CO-XLR3FMNG-N XLR Adaptors CO-XLR3MTO3M-N CO-XLR3FTO3F-N CO-XLR5FTO5F-N CO-XLR5MTO5M-N NA3MM-B Gender Turnaround Adapter - 3-pin Male XLR to 3 pin Male XLR pre-wired, black NA3FF-B Gender Turnaround Adapter - 3-pin Female XLR to 3 pin Female XLR pre-wired, black NA5FF-B Gender Turnaround Adapter - 5-pin Female to 5 pin Female CO-XLR3MTO3M-N pre-wired, black NA5MM-B Gender Turnaround Adapter - 5-pin Male to 5 pin Male CO-XLR3FTO3F-N pre-wired, black Panel Mounts - HD Series CO-XLR3MPR-N CO-XLR4MPR-N CO-XLR5MPR-N NC3MPR-HD XLR Receptacle Male 3-pin HD - stainless/gold NC4MPR-HD XLR Receptacle Male 4-pin HD - stainless/gold NC5MPR-HD XLR Receptacle Male 5-pin HD - stainless/gold Panel Mounts - P Series CO-XLR3FPPNS-N CO-XLR3FPPBG-N CO-XLR3MPPNS-N CO-XLR3MPPBG-N CO-XLR4FPPNS-N CO-XLR4FPPBG-N CO-XLR4MPPNS-N CO-XLR4MPPBG-N CO-XLR5FPPNS-N CO-XLR5FPPBG-N CO-XLR5MPPNS-N CO-XLR5MPPBG-N 26 CO-XLR5MPR-N CO-XLR3MPPNS-N NC3FP-1 XLR Receptacle P Series 3-pin Female - solder cups - nickel/silver NC3FP-B-1 XLR Receptacle P Series 3-pin Female - solder cups - black/gold CO-XLR3FPPNS-N NC3MP XLR Receptacle P Series 3-pin Male - solder cups - nickel/silver NC3MP-B XLR Receptacle P Series 3-pin Male - solder cups - black/gold NC4FP-1 XLR Receptacle P Series 4-pin Female - solder cups - nickel/silver NC4FP-B-1 XLR Receptacle P Series 4-pin Female - solder cups - black/gold NC4MP XLR Receptacle P Series 4-pin Male - solder cups - nickel/silver NC4MP-B XLR Receptacle P Series 4-pin Male - solder cups - black/gold NC5FP-1 XLR Receptacle P Series 5-pin Female - solder cups - nickel/silver NC5FP-B-1 XLR Receptacle P Series 5-pin Female - solder cups - black/gold NC5MP XLR Receptacle P Series 5-pin Male - solder cups - nickel/silver NC5MP-B XLR Receptacle P Series 5-pin Male - solder cups - black/gold CO-XLR5FPPBG-N CO-XLR5MPPBG-N www.techni-lux.com Specifications are subject to change without notice. Power & Data Connectors XLR Connectors Specifications are subject to change without notice. CO-XLR3FPDNS-N CO-XLR3FPDBG-N CO-XLR3MPDNS-N CO-XLR3MPDBG-N CO-XLR4FPDNS-N CO-XLR4FPDBG-N CO-XLR4MPDNS-N CO-XLR4MPDBG-N CO-XLR5FPDNS-N CO-XLR5FPDBG-N CO-XLR5MPDNS-N CO-XLR5MPDBG-N NC3FD-L-1 XLR Receptacle DL1 Series 3-pin Female - solder cups- nickel/silver NC3FD-L-B-1 XLR Receptacle DL1 Series 3-pin Female - solder cups - black/gold NC3MD-L-1 XLR Receptacle DL1 Series 3-pin Male - solder cups- nickel/silver NC3MD-L-B-1 XLR Receptacle DL1 Series 3-pin Male - solder cups- black/gold NC4FD-L-1 XLR Receptacle DL1 Series 4-pin Female- solder cups- nickel/silver NC4FD-L-B-1 XLR Receptacle DL1 Series 4-pin Female- solder cups- black/gold NC4MD-L-1 XLR Receptacle DL1 Series 4-pin Male - solder cups- nickel/silver NC4MD-L-B-1 XLR Receptacle DL1 Series 4-pin Male - solder cups- black/gold NC5FD-L-1 XLR Receptacle DL1 Series 5-pin Female - solder cups- nickel/silver NC5FD-L-B-1 XLR Receptacle DL1 Series 5-pin Female - solder cups - black/gold NC5MD-L-1 XLR Receptacle DL1 Series 5-pin Male - solder cups- nickel/silver NC5MD-L-B-1 XLR Receptacle DL1 Series 5-pin Male - solder cups - black/gold CO-XLR3FPDTBG-N CO-XLR3MPDTBG-N NC3FD-S-1-B XLR Receptacle D Series 3-pin Female - screw terminal - black/gold, wire range (AWG 26-20) NC3MD-S-1-B XLR Receptacle D Series 3-pin Male - screw terminal - black/gold, wire range (AWG 26-20) CO-XLR3FPDNS-N CO-XLR5MPDNS-N Panel Mounts - A & B Series CO-XLR3MPA-N CO-XLR3FPA-N CO-XLR3MPB-N CO-XLR3FPB-N NC3MAY XLR Receptacle A Series 3-pin Male - IDC, wire range (AWG 24-26) - all plastic NC3FAY XLR Receptacle A Series 3-pin Female - IDC, wire range (AWG 24-26) - all plastic CO-XLR3MPA-N NC3MBY XLR Receptacle B Series 3-pin Male - IDC - nickel, wire range (AWG 24-26) - metal front NC3FBY XLR Receptacle B Series 3-pin Female - IDC - nickel, wire range (AWG 24-26) - metal front speakCON Connectors CO-SPKON2F CO-SPKON4F CO-SPKON8F NL2FC Cable End speakON® 2 pole NL4FC Cable End speakON® 4 pole NL8FC Cable End speakON® 8 pole CO-SPKON4FX CO-SPKON4FX CO-SPKON4FXR NL4FX Cable End speakON® SPX 4 pole NL4FRX Cable End speakON® SPX 4 pole - right angle CO-SPKON2MP CO-SPKON4MP CO-SPKON4MPR CO-SPKON8MPR NL2MP Receptacle speakON® 2 pole - solder tabs NL4MP Receptacle speakON® 4 pole - square flange - solder NL4MPR Receptacle speakON® 4 pole - round flange - solder NL8MPR Receptacle speakON® 8 pole - solder - NLT style - nickelWITH SQUARE FLANGE - NOT ROUND CO-SPKON4MMX NL4MMX Adapter speakON® 4 pole - double locking - cable to cable powerCON CO-POWRCON3FI CO-POWRCON3FO CO-SPKON4F CO-SPKON4MMX CO-SPKON4MP Connectors NAC3FCA Cable End - powerCON - power in (blue) NAC3FCB Cable End - powerCON - power out (gray) CO-POWRCON3HI CO-POWRCON3MPI CO-POWRCON3MPO NAC3MPA-1 Receptacle - powerCON - power in (blue) NAC3MPB-1 Receptacle - powerCON - power out (gray) CO-POWRCON3FHI CO-POWRCON3FHPI NAC3FC-HC Cable End - powerCON - 32 Amp high current (black) - screw terminals NAC3MP-HC Receptacle - powerCON - 32 Amp high current (black) - screw terminals CO-POWRCON3MM NAC3MM-1 Coupler - powerCON - NAC3FCA to NAC3FCB etherCON CO-ECON8MAN CO-ECON8MAB CO-ECON8MUN CO-ECON8MUB Po w e r & D a t a C o n n e c t o r s Panel Mounts - D Series CO-POWRCON3FI CO-POWRCON3MM Connectors NE8MC Cable Carrier etherCON CAT5 - nickel - w/BSE boot-needs RJ45 cable (assembled cables) NE8MC-B Cable Carrier etherCON CAT5 - black - w/BSE boot-needs RJ45 cable (assembled cables) NE8MC-1 Cable Carrier etherCON CAT5 - nickel - w/BSX boot-needs RJ45 cable CO-ECON8MAN (for unassembled cables) CO-ECON8F8FPDN NE8MC-B-1 Cable Carrier etherCON CAT5 - black - w/BSX boot-needs RJ45 cable (for unassembled cables) CO-ECON8FPA CO-ECON8FPDN CO-ECON8FPDB NE8FAV-YK Receptacle etherCON CAT5 A Series - Krone punchdown -with screws NE8FDV-Y110 Receptacle etherCON CAT5 D Series - 110 punchdown - Ni - w/screws NE8FDV-Y110-B Receptacle etherCON CAT5 D Series - 110 punchdown-Blk - w/screws CO-ECON8F8FPDN NE8FDP Receptacle etherCON CAT5 D Series - feedthrough - nickel - w/screws www.techni-lux.com CO-ECON8FPDB 27 (Back) CO-RJ45XLR3F CO-RJ45XLR5F RJ45 to XLR Adapters CO-RJ45XLR3F RJ45 CAT5 to DMX XLR 3 Pin Female Adaptor - Molded Black CO-RJ45XLR3M RJ45 CAT5 to DMX XLR 3 Pin Male Adaptor - Molded Black CO-RJ45XLR5F RJ45 CAT5 to DMX XLR 5 Pin Female Adaptor - Molded Black CO-RJ45XLR5M RJ45 CAT5 to DMX XLR 5 Pin Male Adaptor - Molded Black CO-RJ45XLR5F CO-RJ45XLR3F CAT5 Accessories CO-RJ45FF DMXTENDER RJ45 CAT5 Female to Female Extender - Molded Black CO-RJ45TERM RJ45 120 Ohm DMX512 Terminator CO-RJ45DMX3 DMXCOMANDER RJ45 CAT5 3 to 1, 1 to 3 Adapter - Molded Black CO-RJ45XLR3M CO-RJ45DMX3 CO-RJ45FF CO-RJ45XLR5M CO-RJ45TERM 4 Way Power Cable OMEGA Clamp No breaker resets, no switches, simple and robust 4-Way U-Ground Quad Tap Breakout Extension Cord Adaptor - Heavy Duty SJTW 12/3AWG 6' Cord with male edison 515P plug to 4 female edison 515R receptacles UL listed n Size: 4"x4"x1.50" + 6' cord length n Weight: 0.57 kgs/1.25 lbs n Color: Black The "Fast-Lock" clamp is manufactured of aluminum and is designed to insure quick and secure hanging of Giotto, Palco, Ribalta, and Genio Mobile fixtures. The omega clamp serves as an interface between the unit and a standard clamp of your choice. No tools are required to mount the omega, however tools maybe required to mount the clamp of your choice to the Omega. 6 Way Power Cable There are 8 slots on the underside of Giotto fixtures for quick fitting of 2 clamps, which may be positioned horizontally, vertically or at an angle of 15°, according to the fixture base. Palco and Ribaltas use 2 clamps and Genio Mobile only 1 clamp. CLAMP-OMEGA1 PC-515-4WAY/B PC-515-6WAY/B 6-Way U-Ground Power Strip with male Edison 515P 6' cord n cULus n Size: 10"x2"x1" n Weight: 0.43 kgs/.94 lbs n Color: Black with red switch Tripod TR-K470 Specifications: 1/2" / 13 mm bolt hole for standard clamp mounting n Mounts with two fast lock pins - spaced apart 106 mm on center n Weight: .20 kgs/.45 lbs n Size: 5.5" long x 1.375 wide x 1.75" tall n Color: natural aluminum n Material: Aluminum for followspot Hazer & Accessories One riser, two section tripod stand with one leveling leg, memory collar and spigot included. 28 Specifications: Maximum height: 147 cm n Closed height: 109 cm n Legs spread out: 110 cm n Maximum load: 40 kgs / 88 lbs n Head mount size: 28 mm spigot n Material: Chrome plated steel n Leg diameter: 30 mm n Weight: 8.70 kgs / 19.14 lbs XEON II IntellahazerTM FM-HAZERXEON2 The XEON II Intellahazer is a high-power water based haze generator based on Swefog's X-power technology. It is simply the best water hazer on the market today! Features: 1,800 W high output wide bore stainless steel heat exchanger n Specially developed fan turbine, with high capacity for large stages. Can also be operated extremely silent. n Manual, DMX 512, 0-10V, intelligent timer modes. n Advanced user defined sequence programming. n For best performance, use with specially formulated XTR Water based Haze Fluid. Order code FF-ELITEHAZEX1W. Specifications: warm up time 7 minutes n Continuous operation n Smoke projection 45 degree angle, approx. 20 meters maximum n Fluid consumption 0-17.5 ml / min (1,050 ml/h max) n 5 L fluid capacity n Neutral-Pro water based fluid n 133 mm/1,650 rpm 100W high fan type n 2 DMX channels (1st output, 2nd fan) n Low fluid shutoff when completely empty n 115V 60Hz n Power consumption: 1,800W/15A@120vAC n Size: 25.6"x 8"x16.9" n Weight: 21.2 kgs/46.7 lbs Water Based Roscoluxtm Colors Roscolux is the most widely used color filter for theatre, film, television, live entertainment, retail and architectural applications. Developed with the top lighting designers in the industry, Roscolux is the first choice of designers who appreciate the wide choice of unique colors and diffusers, a color palette second to none. Roscolux filters are produced using two unique manufacturing processes; extruded color and deep-dyed color. Both processes allow for a color filter that withstands the rigors of use, controlled color tolerance, meets or surpasses flammability standards and is RoHS compliant. Available in sheets of 20 in x 24 in (50 cm x 61 cm) or rolls of 24 in x 25 ft (61 cm x 7.62 m). We carry a wide variety of ROSCO products give us a call 407-857-8770 or check our website www.techni-lux.com www.techni-lux.com Specifications are subject to change without notice. Power & Data Connectors RJ45 (Back) CO-RJ45XLR3M CO-RJ45XLR5M
© Copyright 2024