1. Automotor

Guía de Referencia de Patrones
Patrones con texturizado profundo
Los productos de metal de Rigidized® se crean mediante un
proceso único que mejora la durabilidad y belleza de los metales
llanos. El proceso de Rigidized® puede ser aplicado a
CUALQUIER METAL. Los patrones están disponibles en una
gran variedad de anchos y grosores. Consulte los datos técnicos
en la parte posterior.
Anchos máximos de patrones disponibles:
914mm
(36")
1HR
1219mm 1524mm
(48")
(60")
914/1219mm
(36"/48")
1NA®
1CS
914/1219mm
(36"/48")
1RL
914mm (36")
914/1219mm
(36"/48")
1HM
1SLG
914mm (36")
914/1219mm
(36"/48")
2WL®
2FL
1UN
914/1219mm
(36"/48")
1RL
914/1219mm
(36"/48")
2WL®
914/1219mm
(36"/48")
3FL
3ND
914/1219mm
(36"/48")
4LB
914/1219mm
(36"/48")
5HR
914/1219mm
(36"/48")
5WL® 914/1219/1524mm
(36"/48"/60")
914/1219mm
(36"/48")
6HC
914/1219mm
(36"/48")
6SL®
914/1219mm
(36"/48")
6WL®
914/1219/1524mm
(36"/48"/60")
60LTH
914/1219/1524mm
(36"/48"/60")
Para averiguar información sobre patrones adicionales y para pedir muestras, llame al 800.836.2580
Placa con Banda de Rodadura
RSS.3
914/1219/1524mm
(36"/48"/60")
Industrial
7DL
1219mm (48")
RTP®
914/1219/1524mm
(36"/48"/60")
STP
914/1219mm
(36"/48")
XTP
914/1219mm
(36"/48")
En relieve
3SQ
1250mm (49.21")
SANDTEX
1219mm
(48")
LINEN
1250mm (49.21")
NOTA: El aspecto de las muestras de patrones que aparecen en los folletos podría variar ligeramente de los productos reales en
cuanto a especificación, tamaño y color. La profundidad de los patrones varía según el calibre. Los patrones no se muestran en su
tamaño real. Para obtener una exactitud completa, pida una muestra.
Datos técnicos
tamaños disponibles
Patrón
Ancho Máximo
Grosor en acero inoxidable
Grosor en otros metales
1CS
914mm (36")
0.46 - 1.91mm (0.018"-0.075")
0.25 - 2.03mm (0.010"-0.080")
1HM
914mm (36")
0.46 - 0.91mm (0.018"-0.036")
0.25 - 1.57mm (0.010"-0.062")
1HR
914/1219mm (36"/48")
1.22 - 1.52mm (0.048"-0.060")
1.22 - 1.57mm (0.048" - 0.062")
1NA®
914/1219mm (36"/48")
0.46 - 1.91mm (0.018" - 0.075")
0.25 - 2.29mm (0.010" - 0.090")
1RL
914/1219mm (36"/48")
0.46 - 3.05mm (0.018" - 0.120")
0.46 - 3.18mm (0.018" - 0.125")
1SLG
914/1219mm (36"/48")
0.46 - 1.22mm (0.018" - 0.048")
0.25 - 1.57mm (0.010" - 0.062")
1UN
914/1219mm (36"/48")
0.46 - 3.05mm (0.018" - 0.120")
0.46 - 3.18mm (0.018" - 0.125")
914/1219mm (36"/48")
0.61 - 3.05mm (0.024" - 0.120")
0.51 - 3.18mm (0.020" - 0.125")
2FL
2WL
914/1219mm (36"/48")
0.46 - 0.91mm (0.018" - 0.036")
0.20 - 0.81mm (0.008" - 0.032")
3FL
914/1219mm (36"/48")
0.46 - 1.52mm (0.018" - 0.060")
0.25 - 1.57mm (0.010" - 0.062")
3ND
914/1219mm (36"/48")
0.46 - 0.91mm (0.018" - 0.036")
0.61 - 1.02mm (0.024" - 0.040")
4LB
914/1219mm (36"/48")
0.46 - 1.52mm (0.018" - 0.060")
0.25 - 2.29mm (0.010" - 0.090")
5HR
914/1219mm (36"/48")
0.61 - 1.52mm (0.024" - 0.060")
0.64 - 1.57mm (0.025" - 0.062")
5WL®
914/1219/1524mm
(36"/48"/60")
0.46 - 1.91mm (0.018" - 0.075")
0.20 - 1.91mm (0.008" - 0.075")
6HC
914/1219mm (36"/48")
0.61 - 2.67mm /3.05mm max
914mm wide (0.024" - 0.105" /
0.120" max 36" wide)
0.61 - 3.18mm (0.024" - 0.125")
6SL®
914/1219mm (36"/48")
0.46 - 1.22mm /1.52mm consulte
con la fábrica para averiguar el
ancho máximo (0.018" - 0.048" /
0.060” consult factory for max width)
0.61 - 3.18mm (0.024" - 0.125")
6WL®
914/1219/1524mm
(36"/48"/60")
0.46 - 3.05mm (0.018" - 0.120")
0.20 - 3.18mm (0.008" - 0.125")
60LTH
914/1219/1524mm
(36"/48"/60")
0.46 - 1.91mm (0.018" - 0.075")
0.25 - 2.29mm (0.010" - 0.090")
7DL
1219mm (48")
0.91 / 1.52 / 1.91mm (0.036" /
0.060" / 0.075")
N/A
LINEN*
1250mm (49.21")
0.74 - 1.91mm (0.029" - 0.075")
N/A
SANDTEX®*
1219mm (48")
0.91 - 1.52mm (0.036" - 0.060")
N/A
3SQ*
1250mm (49.21")
0.74 - 1.91mm (0.029" - 0.075")
N/A
RSS.3
914/1219/1524mm
36"/48"/60")
0.74 - 3.05mm (0.029" - 0.120")
0.91 - 3.18mm (0.036" - 0.125")
RTP®
914/1219/1524mm
36"/48"/60")
0.46 - 3.05mm (0.018" - 0.120")
0.25 - 3.18mm (0.010" - 0.125")
STP
914/1219mm (36"/48")
1.91 - 2.67mm (0.075" - 0.105")
2.03 - 2.54mm (0.080" - 0.100")
XTP
914/1219mm (36"/48")
0.61 - 1.91mm (0.024" - 0.075")
0.61 - 2.03mm (0.024" - 0.080")
3.QLT
1219mm (48")
0.61 - 0.74mm (0.024" - 0.029")
0.61 - 0.81mm (0.024" - 0.032")
Square
1118mm (44")
0.74mm (0.029")
0.81mm ** (0.032")**
Diagonal
1143mm (45")
0.74mm (0.029")
0.81mm ** (0.032")**
Checkerboard
1118mm (44")
0.74mm( 0.029")
N/A
Harlequin
1143mm (45")
0.74mm (0.029")
N/A
Diamond
1143mm (45")
0.74mm (0.029")
0.81mm ** (0.032" )**
Mosaic
1143mm (45")
0.74mm (0.029")
N/A
®
Rigidized® Metals Corporation | 658 Ohio Street | Buffalo, New York 14203 | EE.UU.
TELÉFONO GRATIS 800.836.2580 | TEL. 716.849.4760 | FAX 716.849.0401 | www.rigidized.com
Rigidized® y Rigid-Tex® 1NA®, 2WL®, 5WL®, 6WL®, 6SL®, RTP® y Sandtex® son marcas comerciales
registradas. ©2014 por Rigidized® Metals Corporation 10/14
3.QLT | 4.QLT | 6.QLT
SQUARE
DIAGONAL
CHECKERBOARD
HARLEQUIN
DIAMOND
MOSAIC
Longitudes estándar: 2438mm, 3048mm,
3658mm
*Disponible solamente en acabado templado
(Annealed) brillante
**Disponible solamente en aluminio y cobre
7DL en acabado 2B solamente
Por favor llame al departamento de servicio al
cliente en cuanto a acabados específicos, especificaciones de patrones, tamaños no
estándares, información técnica y muestras
gratis.
Entre los metales texturizados se
encuentran los siguientes: acero
inoxidable, cobre, aluminio, latón, titanio, bronce,
acero, perforado, galvanizado y
galvanelado.