1. Ingeniería

P
P
AUCTION CATALOGUE
By order of:
Crane Building Services & Utilities
due to the re-organisation of its manufacturing facilities
PLEASE NOTE: DUE TO CONTINUED PRODUCTION - MATERIALS / PRODUCTS / TOOLING ETC MAYBE ON OR
AROUND THE LOTS BUT IS NOT INCLUDED UNLESS THE LOT DESCRIPTION SPECIFIES ‘INCLUDING CONTENTS’.
Thursday 5th & Friday 6th February 2015
om
AUCTION DATES:
.c
VIEWING: Tuesday 3rd February 2015 - By appointment only
ns
(other dates may be available by prior appointment only)
Tel: +44 (0)1778 590111 Fax: +44 (0)1778 590730 Email: [email protected]
ct
au
w
.p
p
The Grange Offices, Aunby, Stamford, Lincs, PE9 4EE England
w
w
Peaker Pattinson (Auctioneers) Ltd
io
AT: The Works, Delta Road, St Helens, Merseyside, WA9 2ED, England.
Crane Building Services & Utilities - On-Line Auction Sale
Bidding Closes From: 9.00am on both Thursday 5th & Friday 6th FEBRUARY 2015
VIEWING
Site Access:
Please bring an acceptable form of photographic identification (Passport, Photographic Driving Licence etc.) as this
will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the site)
Viewing:
Tuesday 3rd February 2015 - By appointment only (other dates may be available by prior appointment only)
At: The Works, Delta Road, St Helens, Merseyside, WA9 2ED, England.
ON-LINE BIDDING
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to
abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or
quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible
for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)'
may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyer's Premium.
5) Buyers Premium of 15.5% plus VAT is payable on the bid price.
6) Timing: Lots will close at 30 sec to 2 min intervals starting from 9.00am on both Thurs 5th & Fri 6th FEBRUARY 2015
Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS
Purchaser's unable to bid on-line may bid by the following methods:A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00)
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have
been viewed and regardless of any descriptive errors. Buyer's Premium is still payable.
PAYMENT
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items.
Invoices will be emailed within 3 working days of the final lot closing. Payment can be made by the following:a] Cash (Max £1,000 GBP) b] Bankers Draft or Building Society cheque c] Cheque (5 working days to clear)
d] Most major UK credit cards: £500 Limit (2% fee) e] UK debit cards: £500 Limit f] BACS / CHAPS Payment
Title of the goods remains with the vendors until cleared funds have been received.
REMOVAL
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED
AND ON PRODUCTION OF: THE ORIGINAL COLLECTION NOTE.
Clearance:
All Lots must be removed by 12.00Noon FRIDAY 20th FEBRUARY 2015. Due to the nature of the site,
lots must be removed by prior appointment only (at least 24 hours notice - Tel: 01778 590111).
Dates for clearance are Weekdays only. Times for clearance are 9.30am to 4.30pm Monday to Thursday &
9.30am to 12.00Noon Friday. Please Note: No shipping containers can be loaded on any site.
Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the
Auctioneers for their approval prior to any work commencing on site.
Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG).
Please Note: Certain items may have to be removed by approved contractors only.
Loading:
All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation/
Dismantling/Slinging/Lifting/Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment:
All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson
supervisor - current operating licenses - current equipment certificates and proof of all relevant insurances.
They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health &
safety regulations and may be ordered off the site at any time for breach of these regulations.
Peaker Pattinson (Auctioneers) Limited
TEL: +44 (0)1778 590111
FAX: +44 (0)1778 590730
E-mail: [email protected]
PP
Peaker Pattinson (Auctioneers) Ltd
TERMS & CONDITIONS
1.
Every Sale and these conditions of sale shall be governed by and construed in accordance with English Law and shall be subject to the
jurisdiction of English Courts.
2.
The Company acts as Principles in respect of goods offered for sale and herein shall be known as the ‘Auctioneers’. Persons
instructing the Company to sell goods are herein known as the ‘Clients’. Persons who have acquired lots offered for sale by the Auctioneers are
herein known as the ‘Purchasers’.
3.
All persons attending a Sale under the conduct of the Auctioneers - whether on viewing day, sale day, or to remove equipment at the
sale rooms or any other site - shall be deemed to be on the land and premises at their own risk and shall have no claim against the Auctioneers or
their principals in respect of the cancellation / postponement of a Sale or any loss, accident or injury, however occasioned, save in so far as the
same is proven to be caused by the direct negligence of an employee(s) of the Company.
4.
The Auctioneers make every reasonable effort to ensure the accuracy of the Advertisements, catalogue / on-line descriptions,
photographs and other publicity but except where specifically instructed so to certify by a Client, declare that all statements, oral or in writing, are
those of opinion only, made without responsibility and shall not give rise to any action in law for damages, compensation or rescission of sale by a
Purchaser, against any Client, the Auctioneers or their employees.
5.
Many lots are of an age or nature, which preclude their being in pristine condition. Some catalogue / on-line descriptions may make
reference to damage and / or restoration; however, omission of such a reference does not imply a lot is free from defects nor does any reference to
a particular defect imply the absence of others.
6.
Purchasers should therefore satisfy themselves by physical inspection of lots, before bidding, as to the origin, authenticity, quality,
quantity, age, weight, size and general description - as lots are sold in their actual state with all faults, imperfections or errors of description &
photographs. Any discrepancy over lots must be notified to the Auctioneers prior to removal.
7.
Electrical / Mechanical goods are sold on the strict understanding that these are untested, without warranties or any guarantees as to
serviceability or working order.
8.
Persons handling lots do so at their own risk and shall make good all loss and damage howsoever sustained; such estimate of cost to be
assessed by the Auctioneers whose decision shall be final.
9.
In making a bid, Purchasers acknowledge their attention has been drawn to these Conditions of Sale and that they are satisfied as to the
description, photographs and condition of lots.
10.
Lots are sold subject to any announcement, declaration, alternation of description or other matters, made by the Auctioneers prior to the
closure of the lots.
11.
At the fall of the hammer, due Tender Date or on-line lot closing, the highest bidder, acceptable to the Auctioneers, shall be deemed to
be the Purchaser. In all cases including on-line technical problems, any dispute shall be settled by the Auctioneers, whose decision shall be
absolute and final. No lots shall be transferred.
12.
The Auctioneers my divide, combine, add to or withdraw lots and make any catalogue alterations without notice or reason; they shall
regulate bidding, accept or reject any bid (at their absolute discretion and without justification) and bid on behalf of the Client, where there is a
reserve price or at their authorised discretion.
13.
The Auctioneers shall not be responsible for default on the part of Clients or Purchasers. Any resultant deficiency, together with
interest, costs and expenses, shall be made good by the defaulter, recoverable as and for liquidation damages. This condition is, however without
prejudice to the right of the Auctioneers, in appropriate circumstances to enforce the Sale Contract if they think fit.
14.
The Contract of Sale is made with the Auctioneers as Principal Agents for the Client and payment shall only be made to them.
Notwithstanding the foregoing, the Auctioneers shall retain a lien on all goods, which shall not pass to the Purchaser until full payment has been
received.
15.
Payment must be made in full to the Auctioneers within 3 days upon receipt of invoice by bank transfer, cheque / bankers draft, credit /
debit card, cash etc. and goods will not be released / title of the goods will remain with the vendors until cleared funds have been received.
16.
At the fall of the hammer or on acceptance of the Tender, Private Treaty or on-line auction, all lots shall be and remain, in every
respect, at the absolute risk of the Purchaser, including those of fire, burglary, etc. and damage occasioned to lots by the removal of other goods.
17.
Lots marked ‘(Delayed Collection)’ may be used by the Client until the agreed release date. No responsibility will be taken for ‘wear &
tear’ however breakages will be made good by the Client.
18.
Purchasers shall pay for and remove lots at their own risk and expense within the specified period following the sale; after such time
the Auctioneers reserve the right to scrap, or to resell uncollected lots with no refund being made to the purchaser. In addition they shall be subject
to a daily charge per lot to cover storage, loading, transport, etc. and where applicable, interest on outstanding accounts will be levied at 4% above
Barclays Bank Minimum Lending Rate. In all cases, the Auctioneers may act without notice and any incidental expenses incurred (including
building clearance, penalty clauses etc.) will become a liability to the defaulter.
19.
All bidders must be over the age of 18 years old and must have the express authority of the company or body to bid on their behalf. The
Auctioneers reserve the right to refuse the highest bidder confirmation of purchase of any lot without reason or justification.
20.
The Auctioneers reserve the right to cancel, postpone or re-run an on-line auction / tender in whole or part without reason or
justification.
21.
HEALTH AND SAFETY AT WORK ACT 1974 [Section 6(8)] Purchasers must take all necessary steps to ensure that equipment
purchased is safe and without risks to health when it is re-installed, re-used, cleaned or maintained by a person at work. By accepting these terms
and conditions the Purchaser agrees to relieve the Auctioneer and their Clients of any liabilities under section 6(1)(a) or 6(1A) of the Act, and
accept that failure to facilitate all necessary safety requirements before taking the equipment into service may render the Purchaser liable to
prosecution and / or a fine of up to £20,000 on summary conviction. (Note: It is a UK legal requirement that before work equipment can be taken
into use it must comply with the Provision and Use of Work Equipment Regulations 1998 and any other relevant legislation).
LOT
DESCRIPTION
Day 1 - Thursday 5th February 2015 - starting 9:00am
Main Offices Upstairs
1
1600x800mm beech table with swivel office chair
2
1600x800mm beech table with swivel office chair
3
1600x800mm beech table with swivel office chair & beech bookcase
4
Chubb key type safe
5
2x twin door storage cupboards & wooden sliding door storage cupboard
6
Contents of office inc: 1600x800mm light oak table, 3x upholstered chairs, Royale 4 drawer metal filing cabinet
& 2 door storage cupboard
7
Fellowes PS 70-2CD paper / CD / card shredder
8
1500x1000mm light oak single pedestal desk
9
2x 1600x800mm light oak tables with 3 drawer pedestal units, 2x upholstered swivel chairs
10 2x 1600x800mm light oak tables with 3 drawer pedestal units, 2x upholstered swivel chairs
11 2100x950mm metal frame meeting table with 3x blue upholstered chairs
12 2x blue floor standing upholstered partition screens, 1450x1800mm
13 1800x1600mm light corner single pedestal desk with blue upholstered chair
14 1800x1200mm beech 'L' shape desk with 2x 3 drawer pedestal units, blue upholstered swivel chair
15 1800x1200mm light oak 'L' shape single pedestal desk with blue upholstered swivel chair
16 1800x1200mm beech 'L' shape desk with 3 drawer pedestal unit, black upholstered swivel chair
17 1600x1200mm beech 'L' shape desk with 3 drawer pedestal unit, 2x twin door storage cupboards
18 2x Wini beech top twin sliding door storage cabinets, 1600x460x820mm
19 1600x1200mm beech 'L' shape desk, 3x 4 drawer metal filing cabinets, 2 door storage cupboards, pedestal unit
20 1600x1200mm beech 'L' shape desk with meeting table extension, 3 drawer pedestal unit, 4x chairs, 2x twin
door storage cupboards, twin sliding door storage cupboard, 4 drawer filing cabinet
21 1600x800mm beech table with 2x upholstered swivel chairs, black leather type swivel chair
22 1600x800mm beech table with 4x leather type chairs, coat stand
23 2x Bisley 10 drawer brown / cream metal drawer units
24 Matthews 2100x1800mm mahogany executive 'L' shape desk with 3x upholstered chairs, 1060x400mm table
25 Ideal 4002 cross / cut paper shredder
26 Royale cream / brown 2 door storage cupboard, 900x460x1830mm
27 2x beech 1800x1200mm meeting tables with 9x wooden frame / upholstered meeting chairs
28 Viewsonic PJ406D projector with floor type projector screen
29
30
Main Offices Downstairs
31 1600x1200mm beech 'L' shape desk with 3 drawer pedestal unit, bookcase & leather type chair
32 3x 2000x1050mm light oak corner desks with 3 drawer pedestal units, 3x office swivel chairs etc
33 4x 1600x1200mm beech 'L' shape desks with 3 drawer pedestal units, 3x office chairs & 1600x800mm beech
table
34 Bisley grey metal twin sliding door storage cupboard, 1000x460x2000mm
35 Cream / brown metal 2 door storage cupboard, 3x metal 4 drawer filing cabinets
LOT
DESCRIPTION
36 1600x1200mm light oak 'L' shape desk with 3 drawer pedestal unit, twin sliding door storage cupboard, blue
upholstered swivel chair
37 1600x800mm beech table with 2x blue upholstered chairs
38 1500x1000mm light oak single pedestal desk, table & bookcase
39 Scimitar Standard 2205 paper shredder
40 2x wooden bookcases, 800x460x1000mm with matching 2 door storage cupboard
41 Ibico A4-PB paper binder with Qty plastic combs
42 2200mm long beech curved meeting table with 5x purple upholstered chairs & 2x blue upholstered chairs
43 800x800mm maple reception table with 2x black leather type chrome frame chairs
44 2x light oak 1600x1200mm 'L' shape desks with bookcase, 3 drawer pedestal unit, swivel office chairs etc
45 1600x800mm light oak 'L' shape desk, 2000x800mm meeting table, 2 door storage cupboard, filing cabinets,
upholstered chairs
Canteen
46 3x 1200x600mm white top / metal frame canteen tables with 10x black plastic / metal frame stackable chairs
47 3x 1200x600mm white top / metal frame canteen tables with 10x black plastic / metal frame stackable chairs
48 7x black plastic / metal frame stackable chairs
49 Tefcold FS1380 glass door full height display fridge
50 2x Daewoo KOR-6L 15 white microwaves, 700W
51 Concept 4000 hot water dispenser
52 Haier, Iceline white under counter fridges & similar under counter freezer
53 Lincat electric stainless steel twin basket deep fat fryer, Lincat stainless steel freestanding electric oven / hob
54 Electro-Way electric stainless steel twin pot warmer
55 Lincat electric stainless steel table top grill
56 Dualit DCT2 stainless steel conveyor toaster, 240v, 3000W (2007)
57 Casio 210ER electronic cash register
58 Lincat stainless steel twin door warming oven
59
60
Building Services Production Office
61 2x 1800x800mm light oak 'L' shape desks with 2x black leather type office chairs
62 4x 1520x1000mm light oak curved single pedestal desks with 4x black leather type office chairs
63 2x 1800x800mm light oak 'L' shape desks with 2x black leather type office chairs & metal twin sliding door
storage cupboard
64 2x 1600x800mm light oak single pedestal desks with upholstered swivel chairs
65 1100mm dia beech meeting table with 4x black upholstered / chrome leg chairs
Building Services
66 6 bays light duty storage racking, multishelf, 900x760mm shelf size
67 2 bays light duty boltless storage racking, multishelf, 1950x500mm shelf size
68 4 bays various boltless / fixed shelf storage racking
69 Mobile storage trolley with Qty wire mesh baskets, 300x300x150mm basket size
70 4 bays light duty boltless racking, multishelf, 1000x900mm bay size, 2500mm high
71 3 bays light duty boltless racking, multishelf, 1000x900mm bay size, 2500mm high
LOT
DESCRIPTION
72 4 bays light duty boltless racking, multishelf, 1000x600mm bay size, 2500mm high
Stores
73 77 compartment metal tote bin storage units
74 75 compartment metal tote bin storage units
75 2x fixed shelf storage units, 900x670mm shelf size
76 1 bay Dexion Speedlock type 'S' heavy duty boltless pallet racking, multishelf, 2670x840mm bay size
77 144 compartment metal tote bin storage units
78 4x various fixed shelf storage racks as lotted
79 4 bays light duty storage racking, multishelf, 900x380mm shelf size, 1 bay light duty storage racking,
900x600mm shelf size
80 8 bays Dexion Speedlock type 'S' heavy duty boltless pallet racking, multishelf, 2670x840mm bay size,
3050mm high
81 9 bays Dexion Speedlock type 'S' heavy duty boltless pallet racking, multishelf, 2670x840mm bay size,
3050mm high
82 3000x750mm metal frame work bench with 2 door storage cupboard, 3 drawer filing cabinet, upholstered chairs
83 CAS SCO5P digital counting scales, 5 x 0.001kg capacity
84 9 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 4000mm high
85 4 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 4000mm high
86 6 bays light duty storage racking, multishelf to 1050x500mm shelf size
87 2 bays heavy duty boltless pallet racking, multishelf, 2300x900mm bay size, 2750mm high
88 4 bays heavy duty boltless pallet racking, multishelf, 2300x900mm bay size, 2750mm high
89 2x floor type bar storage racks, multishelf
90 2x floor type bar storage racks, multishelf
91
92
Main Factory - Despatch
93 Turier 1800x1200mm digital platform scales, 2500kg capacity (2003) (Delayed Collection)
94 Avery 1000kg platform scales, 1000x1000mm platform
95 Good Scale GSC-9701 digital counting scales. 1.2kg x 0.1g capacity
96 2450x900mm metal frame workbench
97 3x 4 drawer & 1x 3 drawer metal filing cabinets, twin sliding door storage cupboard
98 2x twin sliding door storage cupboards, 1000x430x1700mm & twin sliding door storage cupboard,
1000x430x1300mm
99 3700x3150mm partitioned office, single door with office furniture (no ceiling)
100 Floor mounted double sided bar rack, 7x fixed shelves, 2500mm long x 3280mm high
101 Floor mounted double sided bar rack, adjustable height shelves, 2300mm long x 320mm high
102 Floor mounted single sided bar rack, 7x fixed shelves, 2500mm long x 3250mm high
103 Floor mounted single sided bar rack, 2x adjustable height shelves, 1000mm long x 1600mm high
104 Floor mounted single sided bar rack, adjustable height shelves, 2300mm long x 3200mm high
105
106 880x700mm oil drip tray
107 2x plastic oil drip trays, 900x700mm
LOT
DESCRIPTION
108 2x mobile bar trolleys
109 2x mobile bar trolleys
110 2000mm long mobile bar trolley
111 Hand Stacker EFS1016 mobile pallet lift truck, 1000kg capacity (2012)
112 12x10m approx partitioned office complete with lights, socket, 3x door ways, ceiling tiles etc
113
114
115
Toolroom
116 Qty HSS straight shank twist drills to 63/64" approx
117 Qty HSS taper shank twist drills to 1 5/32" approx
118 Qty HSS taper / straight shank twist drills to 27mm approx
119 Qty HSS taper shank reamers to 31/32" approx
120 Qty HSS taper shank reamers to 30mm approx
121 Qty HSS taps to 1 1/2" approx
122 Qty HSS taps to 3/4" approx
123 Qty HSS dies to 2 3/8" approx
124 Qty HSS end mills, slot drills to 45mm approx
125 Qty Crawford, Kennametal machine collets to 19mm approx
126 Qty HSS side & face milling cutters / slabs to 6" approx
127 Qty HSS side & face milling cutters, slitting saws to 5" approx
128 Qty HSS side & face milling cutters to 6" approx
129 Qty HSS side & face milling cutters to 6" approx
130 Qty HSS side & face milling cutters to 6" approx
131 Qty Sandvik etc tip boring bars
132 Qty Sandvik etc tip boring bars
133 Qty Sandvik etc tip turning tools
134 Qty Sandvik etc tip turning tools
135 Qty Sandvik etc tip boring bars
136 Qty Sandvik etc tip turning tools
137 Qty various taper drill chucks, centres etc
138 Qty various taper drill chucks, centres etc
139 Qty various taper drill chucks, sleeves etc
140 Qty taper shank twist drills to 1 1/4" approx
141 Qty taper shank twist drills to 1 1/8" approx
142 Qty taper shank twist drills to 63/64" approx
143 Qty straight shank twist drills to 1" approx
144
145
146 Machine clamping set
147 Qty various Wixroyd clamping, screws etc
148 Qty Seco, Dieterle etc tips
LOT
DESCRIPTION
149 Qty HSS taper / straight shank twist drills to 1 49/64" approx
150 Qty HSS end mills, slot drills etc
151 Thiel boring head in wooden case & similar measuring head in wooden case
152 Qty various HSS slitting saws to 8" approx
153 335mm dia rotary table
154 300mm dia rotary table
155 270mm & 350mm dia face plates
156 Qty Jones & Shipman lathe carriers
157 Weber HSP31 bench type parts feeder , 240v
158 250mm dia 4 jaw chuck, 240mm dia 3 jaw chuck
159 Pratt 240mm dia 2 jaw chuck
160
161 Qty various CI angle plate, cube in 2 boxes
162 Eclipse magnetic block & Qty various Vee blocks, parallels etc
163 Qty various size saws, spanners, files, hammers, grease guns etc
164 800x270mm 'T' slotted sub table
165 Indexing dividing head
166 Bench type 3" throat manual press
167 Coventry Die No 1 grinding fixture in wooden case
168 Coventry Die No 2 grinding fixture in wooden case
169 Coventry Die No 3 grinding fixture in wooden case
170 Eclipse 18x6" permanent mag chuck
171 Ratcliffe 10x5" sine table
172 4" throat manual lever press
173 12x9" CI surface plate
174 24x18" CI surface plate
175 24x18" CI surface plate
176 Zeatz Fexac 130 universal dividing head with tailstock
177 3x various machine steadies
178 Jones & Shipman 2101 / 001 wheel balancer
179 Hofmann 4" dividing head with tailstock
180 250mm dia rotary table with Pratt Burnerd 200mm dia 3 jaw chuck
181 200mm dia rotary table
182 Jones & Shipman 4625-212 100mm swivel / tilt machine vice
183 100mm swivel / tilt machine vice
184 Leinen 5" bench vice
185 Record No 25 6" bench vice
186 150mm swivel machine vice
187 130mm swivel machine vice
188 Abwood 150mm machine vice
189 150mm swivel machine vice
LOT
DESCRIPTION
190 150mm swivel machine vice
191 Coventry Gauge imperial slip gauge set
192 SPI 150mm digital vernier caliper
193 Benson 510mm height gauge, Chesterman 360mm height gauge
194 Baty 300mm digital height gauge
195 Qty HSS end mills, taps etc
196 Qty HSS end mills, slot drills to 24mm approx
197 Mitutoyo 150-300mm micrometer in wooden case
198 Mitutoyo 400-500mm micrometer in wooden case
199 Moore & Wright 300-450mm micrometer in wooden case
200 Qty various spanners, files, Torx drivers etc in 2 boxes
201 Qty various HSS turning tools in 2 boxes
202 Qty various 'O' rings, letter stamps, grease gun etc
203 4x Desoutter, Universal Air Tool etc, pneumatic drills, collet drills etc
204 Starrett depth micrometer, Moore & Wright 75-100mm micrometer, 1-2" honing lapping set in cases
205 Qty various Eclipse, Baty, Agemaspark etc magnetic bases, dial gauges, magnetic clock stands, Vee block etc
in 2 boxes
206 400x400mm CI surface plate
207 18x12" CI surface plate
208 Mitutoyo 500-600mm micrometer in wooden case
209 Hoffman 6 drawer storage cabinet (lock cut out)
210 6 drawer storage cabinet (lock cut out)
211 Hoffman 11 drawer storage cabinet with contents inc: solid adjustable chasers, chuck jaws, turning tools etc
212 4 bays light duty storage racking, multishelf, 2400x750mm & 2400x900mm bay size
213
214
215 Avery 6402 bench type hardness tester, s/n 3735
216 SIP MP-3K borer, 520x380mm table, 75-2000rpm, Anilam DRO with tooling & tool cabinet
217 Ab Arboga Maskiner C2 / 2508 2 spindle in line drill, 25x6" RF table, 100-2900rpm (spares or repairs)
218 Pericolo TRO8S 11UT81 12 head (10 installed) universal drilling / tapping / turning machine, swarf conveyor,
8 station rotary turret with load / unload (spares or repair)
219 Hardinge KL-1 super precision lathe, 125-3000rpm with tooling
220 60x36" CI surface table
221 Wickman profile optical grinder with tooling
222 Jones & Shipman 1302 universal grinding machine, swivel internal with tooling
223 Jones & Shipman 310 tool grinder with tooling
224 Jones & Shipman 540 surface grinder, 18x6" mag chuck, coolant, extraction
225 60x26" wooden workbench with Record No 23 bench vice
226 Floor type double sided bar rack with contents inc: steel, copper, brass etc hexagon, flat, bar etc
227 Floor type double sided bar rack with contents inc: nylon, steel, brass etc round / hexagon bar
228 Floor type double sided bar rack with contents inc: nylon, brass, steel, copper etc round / hexagon bar, tube etc
229 Hofmann wooden top workbench with built in drawers, 1500x700mm, Record No 3 bench vice
LOT
DESCRIPTION
230 Thiel Duplex 159 universal milling machine, 28x14" compound table, 40-2000rpm, with tool cabinet & tooling
231 Wellman Incandescent gas furnace, 1400deg C max temperature, Kent temperature controller
232 Martonair pressure testing machine
233 Multishelf storage rack with Qty metal drawers
234 Eurospark H425 spark eroder, 420x300mm table, 1kva, Eurospark AP50-10 control with equipment
235 2 bays light duty storage racking with contents inc: plastic storage bins, chuck jaws etc
236 200mm swivel machine vice
237 Fobco Star single spindle bench drill, 220x220mm RF table, 475-4260rpm
238 Pollard 3 spindle in line drill base, 31x15" RF table
239 Sterling BMSY350 automatic horizontal bandsaw (1999)
240 1 bay light duty storage racking & storage unit with contents inc: clamping jigs, tooling etc
241 Bishamon LV50 mobile hydraulic platform lift, 500kg SWL, 1100x520mm platform (1993)
242 Checo Rin Sink parts washer, 700x500x140mm ID
243
244 Zoller V420 vertical tool pre-setter with PC (1993)
245 Bott Compact 10 drawer storage unit
246 Micrastor 5 drawer storage unit
247 Similar 8 drawer storage unit
248 72x30" double pedestal work table with Paravo bench vice
249 BEC Model 8 8" double ended grinder on base
250 Grimston BG6 6" double ended grinder on base
251 Black & Decker 10" super duty double ended grinder on table
252 Airmaster 15m dust extraction unit, 2.2kW, s/n 9416267
253 Brierley ZB32 drill grinder on base, 32mm capacity
254 IDP 150mm dia single wheel lapping machine, 250x160mm table
255
256
257
258
259
260
Main Factory - Maintenance Store
261 2x 4 drawer metal filing cabinets
262 Hoffman 7 drawer storage cabinet with contents inc: switches, sensors, contactors, buttons, relays etc
263 Hoffman 9 drawer storage cabinet with contents inc: switches, contactors, chain, push buttons, MCBs etc
264 3x 2 door storage cupboards
265 1500x700mm workbench with built in drawer units & Record No 36 bench vice
266 2 door storage cupboard
267 2x 2 door storage cupboards
268 2x 2 door storage cupboards
269 6x Rutland large snow shovels
270 6200x4600mm wire mesh / solid panel partition 3 sided maintenance store, 1100mm wide door way
271 8x7.4m partitioned office / canteen area with ceiling, lights, sockets & office furniture
LOT
DESCRIPTION
272 4x 1500x800mm beech tables with 12x plastic metal frame chairs
Main Factory
273 3000x750mm metal frame workbench
274 3000x750mm metal frame workbench with 3x bench vices
275 Wooden top workbench with built in drawer unit and contents inc: spanners
276 6 drawer wooden plan chest, 1000x700mm
277 2 bays light duty storage racking, multishelf, 1800x800mm bay size & similar 1 bay light duty storage racking
278 2x American Pro mobile tool cabinets
279 2x hose reels & hose
280 3x mobile storage trolleys
281 3x mobile storage trolleys
282 Bisley 3 drawer, 4 drawer metal filing cabinets, single door storage cupboard
283 2x wire mesh mobile storage trolleys
284 Wire mesh mobile trolley, metal tote bin storage rack
285 Automated Engineering heated valve test rig
286 Welconstruct BS30D mobile lift table, 300kg SWL
287 940x630mm mobile drainage trolley
288 3x various mobile trolleys
289 900x600mm mobile trolley with built in cupboard
290
291
292 4x various mobile storage trolleys
293 12x plastic storage bins, 600x400x230mm on dollies
294 Mobile bar trolley, 1500kg SWL
295 Qty various plastic storage bins
296 5x various green plastic mobile storage bins
297 3x various blue plastic mobile storage bins
298 4x yellow plastic mobile storage bins, 750x400x650mm
299 4x yellow plastic mobile storage bins, 750x400x650mm
300 Atomak mobile forkable tipping skip, 750x750x250mm
301 Atomak mobile forkable tipping skip, 750x750x250mm
302 Atomak mobile forkable tipping skip, 750x750x250mm
303 Atomak mobile forkable tipping skip, 750x750x250mm
304 Atomak mobile forkable tipping skip, 750x750x250mm
305 Atomak mobile forkable tipping skip, 750x500x300mm
306 Atomak mobile forkable tipping skip, 750x500x300mm
307 Atomak mobile forkable tipping skip, 750x750x250mm
308 Atomak mobile forkable tipping skip, 750x750x250mm
309 Atomak mobile forkable tipping skip, 750x750x250mm
310 FSE mobile forkable tipping skip, 900x1050x640mm
311 2x Clarke Air CAM5002 portable industrial fans, variable speed, 240v
LOT
DESCRIPTION
312 Clarke Air CAM5002 portable industrial fan, variable speed, 240v
313 2x Clarke Air Movers portable industrial fans, variable speed, 240v
314 Devi Temp303 portable heater, variable temperature / speed, 240v
315 3 step mobile safety steps
316 Mobile pneumatic vacuum, 70ltr capacity
317 HF Clearlift mobile floor crane, 4 1/2 CWT SWL
318 Haacon 220-005 mobile lifter, 300kg SWL (1988)
319 Kaiser Kraft 519340 mobile platform lifter, 150kg SWL (1990)
320 2x Clarke Air CAM5002 portable industrial fans, variable speed, 240v
321 Clarke Air CAM5002 portable industrial fan, variable speed, 240v
322 Valve leak detector testing station
323
324
325 Industriewerk D-6542 Rheinbollen pressure tester (1990)
326 Hazelwood bench mounted flypress, 4" throat
327 Colchester CNC 350 turning centre, 8 tool turret, Fanuc control, swarf conveyor (spares or repair)
328 Colchester CNC 350 turning centre, 8 tool turret, Fanuc control, swarf conveyor (spares or repair )
329 Colchester CNC 350 turning centre, 8 tool turret, Fanuc control, swarf conveyor (spares or repair)
330 Large Qty Colchester CNC tool holders, jaws etc in 2 racks
331 Riello AZ-7-134-5-00 6 head drilling / tapping machine, swarf conveyor, auto / manual with tooling
332 Marr Wash Orbit heated stainless steel parts washer, top loading, 880mm basket
333 Southwork Handling 2000kg rotary lift tables, 1100mm diameter
334 Southwork Handling 2000kg rotary lift tables, 1100mm diameter
335 Southwork Handling 2000kg rotary lift tables, 1100mm diameter
336 Southwork Handling 2000kg rotary lift tables, 1100mm diameter
337 Southwork Handling 2000kg rotary lift tables, 1100mm diameter
338 Valve testing station with Qualitek 623 leak detector, packing station, scales etc
339 Qty various size plastic storage bins, metal tote bins to 450x300x150mm on 4 pallets
340 Qty various wire mesh baskets to 300x300x150mm
341 Pericolo 4 head transfer drilling / tapping machine, load / unload stations
342 Marr Wash Orbit 1000 heated stainless steel parts washer, top loading (1995)
343 Pericolo TRO8S 11UT81 12 head (10 installed) universal drilling / tapping / turning machine, swarf conveyor,
8 station rotary turret with load / unload with tooling
344 2x Interior Partners floor mounted cantilever bar racks, 1000kg max load per arm, 2150mm long x 3000mm high
345 Floor mounted bar rack, 3 fixed shelves, 1150mm long x 1280mm high
346 Cromar mobile forkable tipping skip, 800x1050x600mm
347 FSE mobile forkable tipping skip, 900x900x600mm
348 Mobile coolant removal pump / storage tank
349 LNS PB80 bar ending machine (1996)
350 Takisawa EX-110 CNC turning centre, Fanuc Series 21i-T control, 12 tool turret, swarf conveyor, tailstock,
Sameca Multisam 2000 short magazine bar feed with tooling (1999)
LOT
DESCRIPTION
351 Mori Seiki SL-25M CNC turning centre, MSC-516 control, live tooling, 12 tool turret, tailstock, swarf conveyor,
Sameca Monosam 65 bar feed with tooling (1995)
352 Caber 240C through feed degrease / wash tank, 170ltr tank capacity (1995)
353 Atomak mobile forkable tipping skip, 750x750x250mm
354 Mori Seiki Hitech Pick UP turn CS250 CNC vertical turning centre, 12 tool turret, 4000rpm, Seicos E21L CNC
control, swarf conveyor, Ewab engineering transfer station (2003)
355 Atomak mobile forkable tipping skip, 750x750x250mm
356 Guyson Marr 2 stage 400x200 wash plant, 150ltr tank through feed (2002)
357
358
359
360 Brother TC-324 CNC tapping centre, 500x300mm rotating pallet, 10 tool turret (1995)
361 Kobe KBE-271 single spindle bench drill, 240x200mm RF table, 425-2545rpm, 240v
362 Kerry Ultrasonics UCR300 ultrasonic cleaning tank, variable temperature
363 Pollard single spindle drill on fixed base, 157-1920rpm, foot pedal
364 Pollard single spindle drill on fixed base, 157-1920rpm, foot pedal
365 Geradi Modular Vise 150mm machine vice
366 Geradi Modular Vise 150mm machine vice
367 Mori Seiki SL-25B turning centre, Moric-T611 control,10 tool turret, tailstock, setting probe, swarf conveyor (1994)
368 Hitachi Seiki Hitec-Turn 20S11 CNC turning centre, Seiki Multi control (Fanuc), tailstock, 16 tool turret, live
tooling, swarf conveyor with tool cabinet & tooling (1991)
369 Atomak mobile forkable tipping skip, 750x750x250mm
370 Atomak mobile forkable tipping skip, 750x750x250mm
371 Pollard single spindle drill on fixed base, 157-1920rpm, foot pedal
372 Pollard single spindle drill on fixed base, 157-1920rpm, foot pedal
373 Geradi Modular Vise 150mm machine vice
374 Geradi Modular Vise 150mm machine vice
375 Mori Seiki SL-25 CNC turning centre, Fanuc Series 15-T control, 10 tool turret, tailstock, setting probe, swarf
conveyor (1989)
376 Nakamura Tome TMC-30 CNC turning centre, Fanuc control, 10 tool turret, setting probe, swarf conveyor
s/n A37905
377 Stainless steel parts washer
378 Atomak mobile forkable tipping skip, 750x750x250mm
379 Atomak mobile forkable tipping skip, 750x750x250mm
380 Stainless steel pressure tester with Qty test rig adaptors
381
382
383 2x multidrawer storage racks with contents inc: screws, drills, turning tools, collets etc
384 Mazak Mazatech H-400 CNC twin pallet HMC, 400x400mm pallet, Mazatrol M-32 control, 70 tool ATC, swarf
conveyor with tooling (1989)
385 Atomak mobile forkable tipping skip, 750x750x250mm
386 Haas VF-OE CNC VMC, 36x14" table, 20 tool ATC, Haas control & 4th axis (1995)
387 700x800x350mm forkable tipping skip
388 Nakamura Tome TMC-30 CNC turning centre, 10 tool turret, Fanuc control, swarf conveyor, setting probe,
s/n A37805
LOT
DESCRIPTION
389 Atomak mobile forkable tipping skip, 750x750x250mm
390 Haas VF-3 CNC VMC, 48x18" table, 32 tool ATC, Haas control, Haas 4th axis (1997)
391 1200x900mm CI surface table
392 Herbert 4 spindle in line drill, 46x16" RF table, 74-2850rpm
393 Nakamura Tome TMC-30 CNC turning centre, 10 tool turret, tailstock, Fanuc control, swarf conveyor,
setting probe, s/n A37608
394 Atomak mobile forkable tipping skip, 750x750x250mm
395 Steinel BZ 24 FFZ CNC twin pallet HMC, 400x400mm pallet, Siemens Sinumerik control, 62 tool ATC, swarf
conveyor with tooling (1991)
396 Atomak mobile forkable tipping skip, 1000x1050x600mm
397 Freddy 500ltr mk IV mobile coolant remover (1995) (Delayed Collection)
398 2000x700mm metal frame workbench with Record No3 bench vice
399 460x460mm CI surface plate
400
401
402 Mobile forkable tipping skip, 900x900x600mm
403 Atomak mobile forkable tipping skip, 750x750x250mm
404 Qty various metal tote bins to 450x300x150mm
405 Qty various metal tote bins to 450x300x150mm
406 Plastic mobile drum drip tray
407 2x plastic oil drip trays, 1400x1300mm
408 2x Polysafe plastic oil drip trays / stands, 900x700mm
409 Spillcraft IBC plastic stands, 1450x1450x1050mm
410 Spillcraft IBC plastic stands, 1450x1450x1050mm
411 1500x1500mm IBC plastic stand
412 Wilmat WHO96CB / H mobile crane, 250kg SWL (1993)
413 2500kg manual pallet truck
414 Adcock & Shipley 36" radial arm drill, 96-1455rpm
415 Aldell single spindle production drill, 600mm dia RF indexing table, 58-1100rpm
416 Pelloby floor mounted swing jib, 250kg SWL, 8' span, 12' high approx with Felco electric chain hoist, pendant
control
417 S&L Maskin flexible arm tapping head on 1000x750mm table
418 Webster Bennett 36" DH vertical borer, 9-200rpm
419 Ward 7DS capstan lathe, 6 tool turret with tooling
420 Ward 7D capstan lathe, 6 tool turret, 25-1000rpm with tooling
421 1500x700mm work bench with built in drawers
422 Fobco 1/2" capacity single spindle bench drill on table, 9x9" RF table, 475-4260rpm
423 Drilling jig with 2x Desoutter pneumatic drilling heads
424 Drilling jig with 2x Desoutter pneumatic drilling heads
425 Atomak mobile forkable tipping skip, 900x600x400mm
426 Gnutti FMV-4-90-CD 4 head drilling transfer machine
427 Diedesheim LSA 3S / 3R 8 head drilling machine, 6 tool turret
LOT
DESCRIPTION
428 Funditor roller marking machine
429 Pollard 150A / 6 drill RF table, 1700x400mm
430 1200x600mm metal frame workbench with Record No23 bench vice
431 Elliot horizontal milling machine, 1280x270mm table, 35-1200rpm
432 Startrite Mercury mk II single spindle bench drill, 350-3830rpm on base
433 Gas Cock machining cell inc: leak detector, pneumatic nut wrench, manual press, greasing station, Pollard
single spindle drill, 2x Delta horizontal boring machines
434
435
436 3x Mercer Clearline 2 air gauges
437 Taylor Hobson C112 voltage regulated power supply
438 Taylor Hobson Datum support stand in case
439 Mercer 122L gauge, No2 Autograp
440 Lectroetch 5200 etching control unit
441 2x Mitutoyo 300mm, Mitutoyo 150mm vernier calipers
442 Micronaid grade 2 imperial slip gauge set
443 Precise Engineering imperial slip gauge set (part complete)
444 Harbots Ltd E-81 imperial slip gauge set
445 Harbots Ltd metric slip gauge set
446 3x Carl Mahr 5-26 hand held testers
447 Qty various Mitutoyo, Diatest etc dial gauges etc
448 Qty various Draper, Mitutoyo etc dial gauges
449 Mitutoyo 300mm, Mitutoyo 150mm vernier calipers
450 Mitutoyo metric dial bore gauge
451 2x Hoffman roller sets
452 6x Moore & Wright 0.25mm micrometer heads
453 Hoffman plug gauge set in wooden case
454 Qty various Starrett etc depth micrometers
455 Qty Moore & Wright, Mitutoyo etc micrometers to 3-4"
456 Qty Moore & Wright micrometers to 150-175mm
457 Mitutoyo 125-150mm & 100-125mm micrometers
458 2x precision parallels, sine bar etc
459 Hoffman slotmaster in wooden case
460 Mitutoyo 6-12" external micrometer in wooden case
461 2x Torqueleader heavy duty torque wrenches
462 Qty various Mitutoyo, Starrett etc depth micrometers
463 Qty various thread / plug / ring gauges
464 Qty various thread caliper gauges
465 Qty Mitutoyo, Interapid etc dial gauges, internal micrometers etc
466 Matrix 0-4" diameter measuring machine
467 Starrett 75-100mm, 100-125mm, 125-150mm micrometer
468 Qty Mitutoyo imperial / metric thread micrometers to 50-75mm
LOT
DESCRIPTION
469 Qty Mitutoyo, Starrett etc small hole gauges, depth micrometers, pin gauge sets etc
470 Baty Triga-bore bore gauge 8-10mm in case
471 Matrix Pitter slip gauge set, pin gauge set
472 Mitutoyo 300mm digital vernier caliper, Sylvac 150mm digital vernier caliper
473 Large Qty various Budenberg etc pressure gauges, test gauges on pallet
474
475
End of Day 1
LOT
DESCRIPTION
Day 2 - Friday 6th February 2015 - starting 9:00am
500 Qty various Norbar etc torque wrenches
501 Qty various size spanners, hammers, air lines etc
502 Packer P30/C bag seater, 240v
503 IAT type BA reduced pressure zone backflow preventer with equipment in case
504 2x Loctite glue vessels, Loctite 97103 controller
505 2x Furness Controls 290 leak detectors, Furness controls FCS515 regulator control unit
506 Qualitek 620 leak detector
507 Qualitek 623 leak detector
508 Furness Controls 290 leak detector with equipment
509 Ohaus EC Series digital counting scales
510 Ohaus Defender Xtreme W5000 Series TW51X digital scales
511 Ohaus Defender Xtreme W5000 Series TW51X digital scales
512 Qty HSS taper shank twist drills to 22mm approx
513 Qty HSS taper shank twist drills to 22mm approx
514 Qty HSS end mills, milling slabs etc
515 Qty various chuck keys, tool holders etc
516 Qty HSS knurling tools etc
517 3x die heads with Qty various thread chasers
518 Qty HSS side & face milling cutters, slitting saws to 5" approx
519 Qty HSS side & face milling cutters, slitting saws to 5" approx
520 Tekron Indexable drill, Kennedy drill chucks, tool holders
521 Qty various Jacobs etc drill chucks, sleeves etc
522 Qty Sandvik tip turning tools
523 Qty Stellram, Sandvik etc tips
524 Qty Walter etc tip turning / boring tools
525 Qty die heads, thread chasers etc
526 Qty various thread rolling heads
527 Qty various thread rolling heads
528 Qty HSS dies to 7/8" approx
529 Qty HSS dies to 36mm approx
530 Qty HSS dies to 1 1/4" approx
531 Qty HSS dies to 1 1/2" approx
532 Qty HSS dies to 1 1/2" approx
533 Qty HSS dies to 2 1/4" approx
534 Qty HSS dies to 36mm approx
535 Qty HSS dies to 22mm approx
536 Qty HSS dies to 1 1/4" approx
537 Qty HSS dies to 1 1/2" approx
538 Qty HSS taps to 1" approx
LOT
DESCRIPTION
539 Qty HSS taps to 1" approx
540
541
542 Qty HSS taps to 2" approx
543 Qty HSS taps to 2" approx
544 Qty HSS taps to 1 1/2" approx
545 Qty HSS taps to 1 1/4" approx
546 Qty HSS taps to 3/4" approx
547 Qty HSS taps to 2" approx
548 Qty HSS taps to 3/4" approx
549 Qty HSS taps to 2" approx
550 Qty HSS taps to 7/8" approx
551 Qty HSS taps to 1 1/2" approx
552 Qty HSS taps to 1 1/4" approx
553 Qty HSS taps to 2" approx
554 Qty HSS taper shank twist drills to 24mm approx
555 Qty HSS taper shank twist drills to 22mm approx
556 Qty HSS straight shank twist drills to 7/16" approx
557 Qty HSS taper shank twist drills to 2" approx
558 Qty HSS taper shank twist drills to 7/8" approx
559 Qty HSS taper shank twist drills to 59/64" approx
560 Qty HSS taper shank twist drills to 17mm approx
561 Qty HSS taper shank twist drills to 20mm approx
562 Qty HSS taper shank twist drills to 18mm approx
563 Qty HSS taper shank twist drills to 1/2" approx
564 Qty HSS taper shank twist drills to 2" approx
565 Qty HSS taper shank twist drills to 42mm approx
566 Qty HSS taper shank reamers to 29/32" approx
567 Qty HSS taper / straight shank twist drills to 24mm approx
568 180mm swivel machine vice
569 150mm machine vice
570 Kurt 150mm machine vice
571 125mm swivel machine vice
572 150mm swivel machine vice
573 125mm machine vice
574 Abwood swivel / tilt machine vice
575 75mm machine vice, Pratt Burnerd 125mm 3 jaw chuck
576 6" universal dividing head
577 10x8" adjustable CI angle plate, 3x CI angle plates
578 Vertex boring head with equipment in case
579 WBJ Engineering 450x300mm granite surface plate
LOT
DESCRIPTION
580 Qty various machine collets
581 Qty various jig clamps
582 8x Zurn tool turret holders
583 10 piece parallel set in case
584 150mm machine vice
585 2x Mitutoyo depth micrometers & similar Starrett depth micrometer in wooden cases
586 Mitutoyo 300mm vernier caliper
587 Mitutoyo 50-150mm, 0-8" micrometers
588 12x10x9" CI 'T' slotted cube
589 2x Scalix digital scales, 30kg x 1g capacity
590 2x Scalix digital scales, 30kg x 1g capacity
591 Adam CBK32 digital scales, 32kg x 1g capacity
592 Irwin 125mm bench vice
593 300x230mm CI surface plate
594 300x230mm CI surface plate
595 Mic stand in metal case
596 Qty various plastic storage bins as lotted
597 4x SA AteQ GP leak detectors
598 150mm machine vice
599
600
601 3 bays light duty boltless pallet racking, multishelf, 1780x600mm & 1200x600mm bay size, 2100mm high approx
602 4 bays Finspa heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 2750mm high approx
603 2 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 2750mm high
604 3 bays Finspa heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 2750mm high
605 3 bays Finspa heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 2750mm high
606 2 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 2750mm high
607 4 bays light duty storage racking, multishelf, 1800x900mm bay size, 1800mm high approx
608 4 bays Finspa heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 2750mm high approx
609 Hoffman 11 drawer storage cabinet
610 2x bar stock trolleys with forkable metal stillage
611 Mori Seiki DL-20 CNC twin chuck / turret turning centre, 12 tool turret, MSC-516 CNC control, swarf conveyor
(1995)
612 Industriewerk D-6542 Rheinbollen MDP2 pressure tester (1981)
613 Witzig & Frank Adamat 6/42 drilling / tapping machine, 8 chuck, 6 head with tooling (rebuilt 1996)
614 Industriewerk D-6542 Rheinbollen MDP2 pressure tester (1990)
615 Mori Seiki SL-25B CNC turning centre, Fanuc MF-T6 CNC control, 12 tool turret, tailstock, swarf conveyor (1994)
616 700x460mm parts washer on stand
617 2000mm long mobile bar stock trolley
618 Turbo mobile forkable tipping skip, 0.35m3 capacity
619 Turbo mobile forkable tipping skip, 0.35m3 capacity
620 Turbo mobile forkable tipping skip, 0.35m3 capacity
LOT
DESCRIPTION
621 Citizen Cincom M32 111 CNC single bar auto, live tooling, 8 axis, 40 tool turret, Mitsubishi CNC control, lmeca
Boss 332R-E long magazine bar feed with Cool Blaster chiller unit, swarf conveyor, s/n P14693 (2005)
622 Test station with Taylor Hobson Surtronic 3 surface tester & Mercer Clearline gauge
623 Turbo mobile forkable tipping skip, 0.35m3 capacity
624 Citizen Cincom M32 111 CNC single bar auto, live tooling, 8 axis, 40 tool turret, Mitsubishi CNC control, lmeca
Boss 332R-E long magazine bar feed s/n P14656 (2005)
625 2000mm long mobile bar stock trolley
626 1500x600mm metal workbench with Record No 6 bench vice
627 Turbo mobile forkable tipping skip, 0.35m3 capacity
628 Citizen Cincom C32 V111 CNC single bar auto, Mitsubishi CNC control, lmeca Boss 332R-E long magazine
bar feed, 6 axis, swarf conveyor & extraction (2005)
629 2000mm long mobile bar stock trolley
630 Turbo mobile forkable tipping skip, 0.35m3 capacity
631 Citizen Cincom C32 V111 CNC single bar auto, Mitsubishi CNC control, lmeca Boss 332R-E long magazine
bar feed, 6 axis, swarf conveyor & extraction, s/n MCL 2032 / 1090 (2006)
632 Mettler Toledo IND445 B60 digital scales, 60kg x 20g capacity
633 Baty profile projector, 300mm dia screen, Quadra-Chek 100 DRO
634 Atomak mobile forkable tipping skip, 750x750x250mm
635 Atomak mobile forkable tipping skip, 750x750x250mm
636 Cromer mobile forkable tipping skip, 800x1000x600mm
637 Nakamura Tome WT-150 CNC twin spindle turning centre, twin turrets, live tooling, Fanuc 18i-TB CNC control,
Multifeed short magazine barfeed, swarf conveyor, s/n M157609 (2007)
638 Nakamura Tome WT-150 CNC twin spindle turning centre, twin turrets, live tooling, Fanuc 18i-TB CNC control,
Multifeed short magazine barfeed, swarf conveyor, high pressure coolant, s/n M156101 (2006)
639 Cromer mobile forkable tipping skip, 800x1000x600mm
640
641
642
643
644
645
Main Factory - Compressor House
646 CompAir L75-7.5A rotary packaged compressor, 13.74m3 / min rate of flow, 7.5bar, 75kW, 3000rpm, Delcos
3100 control, Dominick Hunter oil separator & receiver (2010)
647 CompAir 6075 No 7A rotary packaged compressor, 7bar, 2960rpm, lam 3 / min capacity (1996)
Sperryn Building
648
649 15x blue / black plastic stackable chairs with 3x tables
650 Curved 3 section maple meeting table, 2600x1400mm with 11x red upholstered metal frame meeting chairs
651 2 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 3000mm high approx (2013)
652 4 bays heavy duty boltless pallet racking, multishelf, 2200x900mm bay size, 3000mm high approx (2013)
653 4 bays heavy duty boltless pallet racking, multishelf, 2200x900mm bay size, 3000mm high approx (2013)
654 3 bays heavy duty boltless pallet racking, multishelf, 2200x900mm bay size, 3000mm high approx (2013)
655 3 bays heavy duty boltless pallet racking, multishelf, 2200x900mm bay size, 3000mm high approx (2013)
LOT
DESCRIPTION
656 2 bays light duty roller storage racking
657 Clarke Air CDF18HV-8 floor type fan, 240v
658 2x Clarke Air Movers CAM5001 industrial fans
659 Clarke Air Mover CAM5001 industrial fan
660 Clarke Air CAM5002 mobile industrial fan
661 2x Kobe CHT203 2kW convection fan heaters
662 Atomak mobile forkable tipping skip, 750x750x250mm
663 4 bays heavy duty boltless pallet racking, multishelf, 2200x900mm bay size, 3000mm high approx (2013)
664 5 bays heavy duty boltless pallet racking, multishelf, 2200x900mm bay size, 3000mm high approx (2013)
665 5 bays heavy duty boltless pallet racking, multishelf, 2200x900mm bay size, 3000mm high approx (2013)
666 2 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 3000mm high approx (2013)
667 5 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 3000mm high approx (2013)
668 2 bays light duty boltless storage racking, multishelf, 2800x900mm, 2750mm high approx
669 2 bays light duty boltless storage racking, multishelf, 1800x600mm, 2100mm high approx
670 Qty light duty storage units with Qty plastic / metal storage bins
671 Qty light duty storage units with Qty metal tote bins
672 2x metal tote bin storage racks
673 1 bay light duty boltless storage racking, multishelf, 1800x600mm bay size, 1800mm high approx
674 2x floor type plastic storage bin shelves with Qty various size plastic bins
675 3x metal tote bin storage racks
676 7 bays heavy duty boltless pallet racking, multishelf, 2700x900mm bay size, 3000mm high approx
677 7 bays Dexion Speedlock 'R' heavy duty boltless pallet racking, multishelf, 2700x1100mm bay size, 3050mm
high approx
678 5 bays light duty storage shelving, multishelf, 900x450mm shelf size
679
680
681 Klopfer manual press & similar manual press
682 300x230mm & 380x250mm CI surface plates, 4 1/2" rack type machine vice
683 Qty various letter / number stamps
684 Mitutoyo 300mm height gauge & similar 11" height gauge
685 Qty various HSS turning tools in 2 boxes
686 Qty various Jacobs etc drill chucks, revolving centres etc
687 4x Jacobs drill chucks
688 Qty HSS taper / straight shank twist drills to 30mm approx
689 Qty HSS taper / straight shank twist drills to 26mm approx
690 Qty HSS taper / straight shank twist drills to 3/4" approx
691 Qty HSS taper / straight shank twist drills to 1" approx
692 Qty various HSS die & die holders
693 Qty HSS taps to 1" approx
694 Qty HSS taps to 3/4" approx
695 Qty HSS taps to 2 1/2" approx
696 Welconstruct multi compartment storage unit, 3x similar multi compartment storage units
LOT
DESCRIPTION
697 4x light duty storage racks with Qty various pneumatic fittings, valves, vessels etc
698 2x metal 2 door storage cupboards, 2x metal 4 drawer & 1x 2 drawer filing cabinets
699 1800x750mm metal workbench with 2x Record No 23 bench vices
700 600x600mm CI surface plate
701 Kobe pneumatic tool
702 3x similar pneumatic tools
703 3x similar pneumatic tools
704 3x Desoutter, Kobe pneumatic tools
705 3x similar Desoutter pneumatic tools
706 12 drawer storage unit
707 9 drawer storage unit
708 2x tool cabinets, storage racking with contents inc: hand tools, nuts, bolts, files etc
709 1350x760mm metal workbench with Record No 23 bench vice
710 6" throat manual lever press
711 Clarke Metal Worker CDP501F single spindle pillar drill, 400x350mm RF table, 240v (2001)
712 Pollard 24" radial arm drill, 20x16" RF table, 293-2248rpm
713 Ajax AJ 165E gap bed centre lathe, 8" CH x 30" b.c., 30-2000rpm
714
715
Welding Shop
716 2 door storage cupboard with contents inc: sanding belts, jubilee clips, hose pipe connections, PTFE tape etc
717 3 bays light duty storage racking with contents inc: pipe fittings, chain hoist, rope, V belts, drill sharpener etc
718 3 bays light duty storage racking with contents inc: sockets, switches, floor bolts, screws, raw plugs, filters etc
719 2 door storage cupboard with contents inc: rivets, silicon, Dremel multi tool, tape etc
720 2 bays light duty storage racking with contents inc: bolts, nuts, network cable, grease guns etc
721 100mm machine vice
722 Qty HSS twist drills, sleeves etc
723 Qty various hammers, spanners etc
724 Qty various CI angle plates, cubes, Vee blocks
725 6" machine vice
726 Meddings S68 single spindle drill, 100-3200rpm, 500x360mm RF table
727 Ryobi ECO-2335 pull down saw, 240v
728 Metora UMB220 horizontal bandsaw
729 10" manual hand shear on table
730 Oxford RT300 electric arc welding set, 300A
731 Wolf 200mm double ended grinder, 240v
732 Clarke 200mm double ended grinder on base, 240v
733 Qty various welding wire / rods
734 3x Roley, Record bench vices to 5"
735 Single door storage cupboard with Qty various welding masks
736 L-Tec SVI 300i CVCC welder (bottle not included)
LOT
DESCRIPTION
737 Gullco GP-75-15 welding manipulator (1996)
738 Plymovent PHV portable fume extractor, 1800W (2010)
739 40x40" welding bench
740 4x various G clamps to 6"
741 Qty SWP, Tweco etc welding spares inc: tips, nozzles, mixers, caps, wire conduit etc in 2 boxes
742 Qty various Murex, Intercord etc welding rods
743 Qty various Murex, Intercord etc welding rods
744 Qty various Murex, Intercord etc welding rods
745 Qty electrical spares inc: cable, flexible conduit, emergency lights etc on 2 pallets
746 Qty Nederman welding screens, 72x48" approx
747 3x Slan S-770 paint spray guns, 7 bar pressure
748
749
750
Pattern Shop
751 30x30" CI 'T' slotted surface plate
752 72x30" resin bench with vacuum pump, scales etc
753 Alfred Herbert single spindle pillar drill, 18x18" RF table, 443-2150rpm
754 Oliver Machinery 10" double ended lapping / grinder
755 1360x760mm metal workbench with Record No6 bench vice
756 Jet JWL-1642 woodworking lathe, 3200rpm, 200mm CH x 750mm b.c. (2013)
757 Axminster 700353 vertical bandsaw, 680x530mm table, 470mm throat (2012)
758 Wadkin JTA164 disc / bobbin sander
759 Axminster AW 106 PTZ planer / thicknesser, 180mm capacity with portable extraction unit (2012)
760 Axminster TSCE-12R 305mm dia table saw, 866x800mm table (2012)
761 2 bay light duty storage racking with Qty various wood offcuts etc
762 Kemco 48x36" granite surface table
763 105x30" pattern shop woodworking bench with Parkinson 16 Perfect vice
764 105x30" pattern shop woodworking bench with Parkinson 16 Perfect vice
765 Klime-Ezee 3 step mobile safety steps
766 Klime-Ezee 5 step mobile safety steps
767 Donaldson Torit DCE UMA 153 G8 extraction unit, 5.5kW (2004)
Press Shop / Foundry
768 Adige Sala CM500 semi automatic 30mm cut off saw with feed conveyor & hydraulic pack
769 Behringer HBP220A automatic horizontal bandsaw, 250mm wide conveyor, hydraulic clamping (1992)
770 Bentley G12 inclinable mechanical press, 24x20" bed, 85SPM
771 Sweeney & Blocksidge No4 CP mechanical press, 20x11" bed
772 Wilkins & Mitchell D30-HB-1-8 mechanical press, 200ton, 45SPM, 8" stroke, 16-20" shut height, 36x24" bed
with billet furnace
773 Bentley OBR-120 mechanical press, 120ton, 3 1/2" ram adjustment, 6" stroke, 750x750mm bed with billet
furnace
774 Weingarten PS160 mechanical press, 180ton, 600x550mm bed with billet furnace
LOT
DESCRIPTION
775 Gas fired billet furnace
776 Sweeney & Blocksidge 7" manual fly press on bench
777 Vacublast Honemaster bead blast cabinet with extraction unit
778 Butterfield MCR Airoblast 101 blast cabinet (1994)
779 Adige CM501A automatic cut off saw with loading station (1992)
780
781 2x Wagner, 1x BT lifter electric pallet lift trucks (spares or repair)
782 2200mm long floor mounted bar rack, double sided, 6 fixed shelves
783
784
785
786 Genie Z-30 / 20N electric cherry picker, 570hrs (2005) (Delayed Collection)
787 60x wooden pallet racking boards, 1300x1100mm
788 2x LMK Thermosafe IBC heaters with controllers
789 Clarke 1 tonne bag sand
790 CFM SOL3000 industrial vacuum, 3kW, 240v (2005)
791 3x various mobile trolleys & Nitchi 2T manual chain hoist
792 Atomak mobile forkable tipping skip, 750x750x250mm
793 Atomak mobile forkable tipping skip, 750x750x250mm
794 2x industrial fans, 240v
795 Clarke Air CAM5002 & Clarke Air Movers industrial fans, 240v
796 12x mobile foundry trolleys
797 Dolphin digital scales, 100kg x 20g capacity
798 Digi DC-190 digital platform scales, 1800x1200mm, 3000kg capacity (Delayed Collection)
799 1800x800mm fettling bench with Creusen & Kango double ended grinder / disc cutters
800 Rowland 16" heavy duty double ended fettling grinder
801 1800x800mm fettling bench with double ended grinder, Record No 23 bench vice, 4x Kobe pneumatic
deburring tools
802 Kango 8364 6" double ended grinder / disc cutter
803 Qty various face masks, hand tools etc in 2 boxes
804 Qty 3M etc full face masks with ear defenders
805 16" heavy duty fettling cut off saw
806 DCE C72-4 K15 dust extraction unit, 11kW (1996)
807 Doug Booth & Sons 680mm dia rotary shot blast machine with shot reclaim system & extraction unit
808 OMSG 1641 680mm dia rotary finishing shot blast machine, extraction unit
809 Ridsdale green sand swing impact tester
810 Ridsdale Dieter permeability tester & Ridsdale impact tester
811 Sartorius AY1501 digital scales, 1500g x 0.1g capacity
812 Thomas Ashworth Speedy moisture tester in case
813
814
815 2500x1300mm oil drip tray
816 Laempe LLKFZ10 automated core shooter (modified to produce moulds), 400mm wide plate, 13kW with Laempe
VM6.2 core sand mixer, 4kW, s/n 2000 (2001)
LOT
DESCRIPTION
817 Simon Macawber 3/4 blower
818 Ashland screw mixer with control & hopper (inverter fault - spares or repair)
819 British Moulding Machine model V1865 type CTI green sand jolt squeeze machine, 515x380mm & 720x410mm
box
820 BBM Weston model 41912 type QJSM21 green sand jolt squeeze machine, 400x300mm box, 6 moulds per
hour with Qty pattern boxes
821 BBM Weston model 41912 type QJSM21 green sand jolt squeeze machine, 400x300mm box, 6 moulds per
hour with Qty pattern boxes (spare or repair)
822 BBM Weston model 41912 type QJSM21 green sand jolt squeeze machine, 400x300mm box, 6 moulds per
hour with Qty pattern boxes
823 BBM Weston model 41912 type QJSM21 green sand jolt squeeze machine, 400x300mm box, 6 moulds per
hour with Qty pattern boxes
824 35m approx 400mm wide roller conveyor inc: curved / straight sections
825 Pouring / cooling in line extraction unit with ducting
826 Qty various Kennedy etc G clamps, quick change clamps etc
827 Qty various weights to 56lbs
828 9 post floor mounted gantry, 200kg SWL, with pneumatic chain hoist & pourer, 13x5m approx footprint
829 Python girder type swing jib, 5ft span approx, 250kg SWL with Mini 250 pneumatic hoist
830 Inductotherm VIP125 Power Trak & Inductotherm VIP125R Power Trak twin pot electric furnaces with shared
pneumatic lifter & fans
831 Foundry Equipment International 1250mm dia sand mill with knock out unit, reclaim green sand hopper,
auto conveyor feeding 4x hoppers
832 Russell Lear & Sons 1000x900mm attrition unit with CV conveyor, blower unit & extraction
833 Auxiliary reclaim sand hopper
834 15 ton capacity clean sand hopper with C Lear & Sons pneumatic sand conveyor
835 Carter Environmental Cent 1320 wet extraction unit (spares or repair) (1997)
836 Carter Environmental dry dust collector
837 Northern Instruments DPPR furnace lance
838 Crane Foundry St. Helens last cast December 2014
839
840
Berle Building
841 30x 20mm dia x 3050mm approx round brass bars, 305kg approx weight
842 9x 30mm dia x 3050mm approx round brass (CZ121) bars, 162kg approx weight
843 29x 25mm dia x 3050mm approx round brass (CZ121) bars, 375kg approx weight
844 26x 30mm dia x 3050mm approx round brass (CZ132) bars, 487kg approx weight
845 150 approx 35mm dia x 1050mm round 5083 grade aluminium tubes
846 27 approx 45mm dia x 1535mm approx round brass (CZ122) bars
847 8x 60mm dia x 3200mm approx round brass (CZ122) bars, 602kg approx weight
848 3x 50mm dia x 3660mm approx, 4x 40mm dia x 3660mm approx, 13x 25mm dia x 3000mm approx round
brass bars
849 12x 46mm dia x 3000mm approx round brass (CZ122) bars, 520kg approx weight
850 54x 32mm dia x 3000mm approx round brass (CZ122) bars, 1100kg approx weight
LOT
DESCRIPTION
851 16x 40mm dia x 3100mm approx round brass (CZ132) bars, 1x 60mm dia x 3660mm approx round brass bar &
9x 44mm dia x 3660mm approx round brass bars
852 20x 52mm dia x 2900mm approx round brass (CZ122) bars, 13x 12mm dia x 2900mm approx & 5x 17mm dia
x 2900mm approx round brass bars, 1140kg approx weight
853 8x 59mm dia x 3050mm approx round brass (CZ122) bars, 566kg approx weight
854 7x 35mm dia x 3050mm approx, 4x 28mm dia x 3050mm approx round brass bars
855 7x 59mm dia x 3050mm approx round brass (CZ122) bars, 3x 44mm dia x 3600mm approx round brass bars,
496kg approx weight
856 52x 7/8" dia x 3050mm approx round brass (CZ122) bars, 2x 54mm dia x 3650mm approx round brass bars,
740kg approx weight
857 90x 20mm dia x 3050mm approx round brass bars
858 30x 22mm dia x 3050mm approx hexagon LG2 bars
859 15x 35mm dia x 3050mm approx round brass (CZ121) bars, 500kg approx weight
860 50x 30mm dia x 4000mm approx round stainless steel bars, 1200kg approx weight
861 14x 22mm dia x 3050mm approx & 26x 21mm dia x 3050mm approx round brass (CZ122) bars, 14x 15mm dia
x 3050mm approx round brass bars, 650kg approx weight
862 21x 36mm dia x 3050mm approx round brass (CZ122) bars, 560kg approx weight
863 20x 30mm dia x 3050mm approx, 8x 34mm dia x 3050mm approx hexagon brass bars & & 14x 25mm dia x
3050mm approx hexagon LG2 bars
864 10x 27mm dia x 3050mm approx round LG2 bars
865 20x 35mm dia x 3050mm approx round brass (CZ121) bars, 498kg approx weight
866 44x 25mm dia x 3050mm approx round brass (CZ121) bars, 550kg approx weight
867 44x 25mm dia x 3050mm approx round brass (CZ121) bars, 550kg approx weight
868 44x 25mm dia x 3050mm approx round brass (CZ121) bars
869 10x 7/8" dia x 3050mm approx round brass (CZ132) bars, 14x 27mm dia x 3050mm approx round brass
(CZ122) bars, 305kg approx weight
870 20x 35mm dia x 3050mm approx round brass (CZ121) bars, 500kg approx weight
871 20x 35mm dia x 3050mm approx round brass (CZ121) bars, 500kg approx weight
872 41x 25mm dia x 3050mm approx round brass (CZ121) bars, 550kg approx weight
873 16x 25mm dia x 3050mm approx round brass bars
874 24x 30mm dia x 3050mm approx round stainless steel bars
875 24x 30mm dia x 3050mm approx round stainless steel bars, 520kg approx weight
876 24x 30mm dia x 3050mm approx round stainless steel bars, 520kg approx weight
877 16x 35mm dia x 3050mm approx round brass bars, 435kg approx weight
878 11x 2 1/2" dia x 3000mm approx round aluminium bars
879 5x 2 5/8" dia x 3000mm approx round aluminium bars
880 11x 30mm dia x 3050mm approx hexagon brass bars
881 Qty various 3050mm long stainless steel, brass etc round / hexagon bars
882 Qty various aluminium bars to 4000mm long approx 7 28mm dia
883 3x 45mm dia x 4000mm long approx, 1x 1 1/8" dia x 4000mm approx aluminium round bars
884 5x 65mm dia x 4000mm long approx aluminium round bars
885 20x 25mm dia x 4000mm long approx aluminium round bars
886 10x 65mm dia x 4000mm long approx aluminium round bars, 380kg approx weight
LOT
DESCRIPTION
887 10x 25mm dia x 4000mm long approx aluminium round bars
888 24x 64mm dia x 950mm long approx aluminium round bars
889 30x 64mm dia x 950mm long approx aluminium round bars
890 Qty various stainless steel bars to 25mm dia & 3000mm long approx
891 22x 32mm dia x 3050mm long approx round brass (CZ121) bars, 613kg approx weight
892 10x 44mm dia x 4100mm long approx round stainless steel (C7WX) bars, 505kg approx weight
893 47x 30mm dia x 4200mm long approx round stainless steel bars, 1090kg approx weight
894 Qty 10mm x 10ft aluminium (201) round bars in crate, 533kg approx weight
895 Qty 10mm x 3050mm long approx aluminium hexagon bars
896 Qty 10mm dia x 3050mm long approx aluminium round bars, 370kg approx weight
897 Qty 21mm dia x 3050mm long approx aluminium round bars, 1500kg approx weight
898 Tesa 3D Micro-MS343 CMM, 600x450mm granite base, no probe or equipment (spares or repair)
899 Qty Metabin blue plastic storage bins, 250x220x160mm on 3 pallets
900 Qty various size plastic storage bins on 3 pallets
901 Qty Schoeller blue plastic storage bins, 240x150x120mm on pallet
902 Qty various size metal tote bins on pallet
903 Funditor Mark-Matic P marking machine
904 Qty various plastic storage bins on 4 pallets
905 Qty various size plastic storage bins on 3 pallets
906 Qty various orange / red plastic storage bins on 2 pallets
907 Qty various plastic storage bins on 4 pallets
908 10 lengths Canalis KSA 250ED buzzbar with hanging brackets
909 10 lengths Canalis KSA 250ED buzzbar with hanging brackets
910 Kaiser Kraft mobile hoist
911 Qty Holo Krome 6mm Allen keys & Qty M8 x 30mm socket head cap screws on pallet
912 Spill Kraft 1350x1350mm oil drip tray
913 2x Sabre Panaseal positive pressure face masks, 2x Sabre oxygen bottles, pipes, valves etc on pallet
914 8x Qualitek, Furness Controls etc leak detectors (spares or repair)
915 Heareus T6060 electric oven, 300degC max temperature, 240v (spares or repair)
916 Heareus Votsch HT 4057 environmental chamber, -40degC to +180degC (spares or repair)
917 Automated Packing Systems HS-100 Excel Autobag bagging system with PI-4000 auto labeller
918 Twin pump hydraulic oil test rig on frame
919 CRS Robotics RA 5542 6 axis robot with RC5635 controller & pendant
920 Kawasaki FS006M G 6 axis robot with robot controller & pendant
921
922 2x Thermal Transfer Technology 550mm dia cooling fans
923 2x Thermal Transfer Technology 550mm dia cooling fans
924 2x Reznor cooling fans
925 2x multishelf mobile storage trolleys
926 Kaiser Kraft mobile barrel trolley
927 Qty round nylon bar to 100mm dia, to 1000mm long on pallet
LOT
DESCRIPTION
928 Qty round nylon bar to 75mm dia, to 1500mm long on 2 pallets
929 12x Durapipe Petrol Line Xtra 50mm dia x 6000mm long pipes
930 Diedesheim LSA5 13352 6 head drilling / tapping machine, Allen Bradley control
931 CompAir L45 SRF-13A rotary packaged compressor, 8.02m3 / min flow rate, 45kW, 4250rpm, Delcos 3100
control with air receiver (2008)
932
933
934 Mountfield 1538M ride on lawnmower, 7 height adjustments (2009)
935 4x AteQ F2P pressure / test controllers
936 600x500x900mm flammable liquid storage cupboard
937 Qty Protector Tornado T Power respiratory protective systems on pallet
938 ThorWorld SMY169037FW vehicle loading ramp, 7000kg capacity (2008) (Delayed Collection)
939
940
941
942
943
944
945
End Of On-Line Auction Sale
P
P
Airport:
Manchester (26 miles)
VIEWING: Tuesday 3rd February 2015 -
Railway Station:
St Helens (2 miles)
Hotels:
Premier Inn - St Helens
+44 (0) 871 527 9020
Ramada Encore - Haydock
+44 (0) 1942 290040
Chalon Court Hotel
+44 (0) 1744 453444
(other dates may be available by prior appointment only)
By appointment only
At: The Works, Delta Road, St Helens,
Merseyside, WA9 2ED, England.
Buyers premium of 15.5% + VAT (at current UK rate) will be charged in addition on all lots
(Exported items: Applicable VAT may be refunded on production of satisfactory shipping documents)
The Grange Offices, Aunby, Stamford, Lincs, PE9 4EE England
Tel: +44 (0)1778 590111 Fax: +44 (0)1778 590730 Email: [email protected]
m
.c
o
ns
tio
uc
Peaker Pattinson (Auctioneers) Ltd
pa
PLEASE NOTE: ACCEPTANCE OF
OFFERS AND SUITABILITY OF
PURCHASERS FOR SOME OR ALL OF
THE EQUIPMENT IS AT THE EXCLUSIVE
DISCRETION OF THE VENDORS.
w
w
.p
Peaker Pattinson (Auctioneers) Ltd reserve
the right to sell equipment prior to the sale.
IMPORTANT NOTE:
All information supplied by the auctioneer in promotional material, catalogues etc.
is provided in good faith but may not be correct. No liability is accepted by the auctioneer
or their Clients for incorrect information and it is the responsibility of the purchaser to
satisfy themselves by physical inspection with regard to: General description, measurement,
location, age, general conditions, environmental or health and safety conditions,
removal requirements etc.
Purchasers who do not inspect (including online bidders) are deemed to
have waived the right to this facility and all sales are deemed to be
‘as inspected’ and ‘as is, in situ.’
Any bid is accepted on the above basis only and all terms
are governed by English law.
w
PHOTOGRAPHIC IDENTITY MAY
BE REQUIRED FOR VIEWING