1. Ingeniería

U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
c
Terms and Conditions
ORDER Minimum order is $50.00
CREDIT REQUIREMENTS All orders are subject to approval by our Credit Department. If you are a new account, please furnish us
with your tax exempt status, a bank reference, three current supplier references and/or your current D&B rating with your first order.
A credit limit will be imposed on new accounts until credit has been established.
PAYMENT TERMS Terms are net 10 days. Catalog prices are subject to change without notice.
FREIGHT Orders are shipped F.O.B. from our manufacturing facility.(International Shipments are Incoterms: Ex Works).
ORDER CANCELLATION
material.
In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and
RETURNED MATERIAL A handling/restocking fee will be applied to all standard products returned for credit. A return authorization
number and shipping instructions must be obtained in advance before an item can be returned.
CLAIMS All claims or product shortages must be made within 30 days of the invoice date.
CONNECT WITH WILSON TOOL
wilsontool.com is your
online source for the latest
news and information from
Wilson Tool. Available in
seven languages,
wilsontool.com is a great
resource for all of our
customers around the globe.
Our e-newsletters not only keep you up to date on the
latest product and company news along with workshop
and class information, but each month we provide a
solutions-based article to improve performance and
productivity in your shop.
Register at wilsontool.com
2
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
TABLE OF CONTENTS
Improve Wear Resistance with Optima®.
Every Wilson Trumpf style punch is available with Wilson’s
exclusive Optima® coating. Developed by Wilson engineers,
Optima provides a surface hardness, wear resistance and
lubricity unmatched by any other coated or uncoated turret
punch press tooling. The result is a longer tool life, more hits
between sharpenings, reduced galling, better performance
and less downtime.
Machine Groups/Keying Chart . . . . . . . . 4
2•4•1™ Punch & Punch Holders. . . . . . . 5
2•4•1™ Series Round & Shape. . . . . . 6-7
Standard Tools Round Size 0, I, II. . . . . . 8
Standard Tools Standard Shape
Size 0, I, II . . . . . . . . . . . . . . . . . . . . . . 9
Heavy Duty Tooling. . . . . . . . . . . . . . . . 10
Keyed Collar & Punches. . . . . . . . . . . . 11
Close to Form Slitting Punch. . . . . . . . . 12
Parting Tool Dies. . . . . . . . . . . . . . . . . 13
Quick Set Parting Tool Punch . . . . . . . . 14
Optima Coating Provides:
• Longer tool life
• Increased wear resistance
• More hits between
sharpenings
• Reduced adhesion (galling)
• Reduced slug pulling
• Reduced corner breakdown
Punch Life
•Improved special tooling
performance
• Lower overall tooling costs
• In-house coating facilities
allow us to deliver faster
and maintain total quality
control
Material Adhesion
Multi-Tool 4 Station . . . . . . . . . . . . . . . 15
Multi-Tool 6 Station . . . . . . . . . . . . . . . 16
Multi-Tool 5 Station . . . . . . . . . . . . . . . 17
Multi-Tool 10 Station . . . . . . . . . . . . . . 18
SPECIALS
A-Plus . . . . . . . . . . . . . . . . . . . . . . . 19
Coining . . . . . . . . . . . . . . . . . . . . . . 20
FORMING
Card Guide. . . . . . . . . . . . . . . . . . . . 21
Emboss. . . . . . . . . . . . . . . . . . . . . . 22
Extrusion . . . . . . . . . . . . . . . . . . . . . 23
Hinge Tool . . . . . . . . . . . . . . . . . . . . 24
Progressive Rib. . . . . . . . . . . . . . . . . 25
Rollover Tool. . . . . . . . . . . . . . . . . . . 26
LANCE & FORMS
Lance & Form . . . . . . . . . . . . . . . . . 27
Bridge Lance & Form. . . . . . . . . . . . 28
EKO. . . . . . . . . . . . . . . . . . . . . . . . . 29
Half shear / Rooftop Shear . . . . . . . . 30
Scratch tool. . . . . . . . . . . . . . . . . . . 31
Louvers. . . . . . . . . . . . . . . . . . . . . . 32
Thread Form . . . . . . . . . . . . . . . . . . 33
The yellow area indicates actual results
achieved through three tool sharpenings of
.010" (0.25mm) each. The complete graph
indicates projected results with a total of
.236" (6mm) removed for sharpening.
Number of Hits
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Tip Wear
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
Thread Loop . . . . . . . . . . . . . . . . . . 33
PIERCE
Cluster Tools. . . . . . . . . . . . . . . . . . . 34
SHEET MARKING
Letter Stamp . . . . . . . . . . . . . . . . . . 35
Multi-Scribe . . . . . . . . . . . . . . . . . . . 36
Stamping. . . . . . . . . . . . . . . . . . . . . 37
SPECIALTY
Rolling Deburring. . . . . . . . . . . . . . . . 38
Opti-Bend. . . . . . . . . . . . . . . . . . . . . 38
Tapping Tool. . . . . . . . . . . . . . . . . . . 39
Zip-Tech. . . . . . . . . . . . . . . . . . . . . . 39
Wilson Wheel Family. . . . . . . . . . . . . . 40
Special Shapes. . . . . . . . . . . . . . . 41-47
Specials Large Diameter
Hole Punching. . . . . . . . . . . . . . . . . . . 48
3
MACHINE GROUPS / KEYING CHART
MACHINE GROUPS
A
B
C
D
E
F
G
H
I
S
CN 700
CN 901E
CN 1200S
TRUMATIC
SUNIMAT 400
TRUMATIC
TRUMATIC
TRUMATIC
TRUMATIC
MINIMATIC
CN 900
CN 902
CN 1200A
20
TRUMATIC
TRUMATIC
150W
20AW
500R
2000R
100
CN 701
CS 75
CS 15
20
150K
202K
152W
202W
200R
2010R
TRUMATIC
CN 901
CS 75.2
CS 20
202M
151K
225K
180W
300W
190R
2020R
120R
CS 20A
152K
235K
180.2W
300LW
600L
3000-1300R
160R
MP 25
180K
300K
180R
300PW
3000-1600R
MP25D
180.2K
300LK
180LW
300TOP
5000R
180KD
300PK
180.2LW
400W
6000R
180LK
400K
ELX/SWIFT
1000R
185
7000L
180.2LK
240
240R
250
260R
KEYING FOR NON-ROTATIONAL MACHINES
30°
30°
0°
90°
0°
270°
90°
180°
4
270°
180°
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
2-4-1 SERIES TOOLING
1
3
2
4
5
6
Punch Assembly 26659 shown
REPLACEMENT PARTS
2-4-1 PUNCH HOLDERS
DESCRIPTION
Cat No.
Punch Holder Assembly* 0 - 1.575” [0 - 40 mm]
DESCRIPTION
Price
26659
1
Cat No.
Cheese Head Screw M3 x 12mm [0 - 40]
25215
Cheese Head Screw M3 x 7mm [40.01 - 76.2]
24150
Precision Ground Spacer 0 - 1.575” [0 - 40 mm]
25806
Punch Holder Assembly* 1.576 - 3.000” [40.01 - 76.20 mm]
26660
2 Punch Collar Key
25113
25807
3 Retaining Ring 15.1 mm x 1.0mm
24424
4 Socket Head Cap Screw M8 x 40mm
30161
5 Lockwasher M8
974100
6 Magnetic I.D. Label
26657
Precision Ground Spacer 1.576 - 3.000” [40.01 - 76.20 mm]
* Each Punch Holder Assembly is shipped with
a Precision Ground Spacer.
Price
ROUND DIE INSERTS
DIAMETER
Cat No.
0 – 1.575” (0 – 40.0mm
25980
1.576 – 2.205” (40.01 – 56.0mm)
25982
Price
SHAPE DIE INSERTS
DIMENSION
Cat No.
0 – 1.575” (0 – 40.0mm)
25979
1.576 – 2.205” (40.01 – 56.0mm)
25981
Price
Die Insert
DIE INSERT SHIM PACKS
DIMENSION
Cat No.
Shim Pack 0 - 1.575” (0 - 40.0mm)
25983
Shim Pack 1.576 - 2.205” (40.01 - 56mm)
25984
Price
2-4-1 URETHANE STRIPPERS
DESCRIPTION
Cat No.
Push on for flat [0 - 30 mm ‘A’ Dim]
26661
Push on for whisper/long [0 - 30 mm ‘A’ Dim]
26649
Push on for flat [30.01 - 40 mm ‘A’ Dim]
26662
Push on for whisper/long [30.01 - 40 mm ‘A’ Dim]
26652
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
Price RD
Price SH
[email protected]
[email protected]
[email protected]
5
2-4-1 SERIES ROUND
Whisper
Shear
Flat
ROUND PUNCH
Flat
Diameter
Cat No.
Whisper Shear
Price
Cat No.
Long **
Price
Cat No.
.093 - 1.181” [2.36 - 30.00mm]
25768
25769
25770
1.182 - 1.575” [30.01 - 40.000mm]
25774
25775
25776
1.576 - 2.205” [40.01 - 56.00mm]
25780
25781
25782
2.206 - 2.598” [56.01 - 66.00mm]
25786
25787
25788
2.599 - 3.000” [66.01 - 76.20mm]
25792
25793
25794
OptimaTM
Add-on
Price
**For Group I machines. Not available with shear.
ROUND DIE
Size
Diameter
Cat No.
I
Up to 1.260” [32.00 mm]
26739
II
Up to 1.528” * [38.80 mm*]
26737
II
1.261 - 3.031” [32.01 - 77.00 mm]
26727
Price
ROUND STRIPPER
Description
Cat No.
Group H/I
25358
Keyed
25006
Stripper Pin
25179
Price
ADD ONS
Special Shears
Inverted Rooftop/Single Concave
Add on for Rounds
Small Diameter
Punch
Size I
.031 - .061” [0.79 - 1.56mm]
Size II
.062 - .092 [1.57 - 2.34mm]
Double Valley/Double Concave
Clearance < .004 [0.10mmm]
Size I
Size I
Size II
Size II
Add on for Shapes
Die
Small Width
Size I
Size II
Punch
Die
.031 - .039” [0.79 - 1.00mm]
.040 - .092” [1.01 - 2.34mm]
.031 - .039” [0.79 - 1.00mm]
.040 - .092” [1.01 - 2.34mm]
Clearance < .004 [0.10mmm]
Size I
Size II
6
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
2-4-1 SERIES SHAPE
Whisper
Shear
Flat
SHAPE PUNCH
Flat
Diameter
Cat No.
Whisper Shear
Price
Cat No.
Price
Long **
Cat No.
.093 - 1.181” [2.36 - 30.00mm]
25771
25772
25773
1.182 - 1.575” [30.01 - 40.000mm]
25777
25778
25779
1.576 - 2.205” [40.01 - 56.00mm]
25783
25784
25785
2.206 - 2.598” [56.01 - 66.00mm]
25789
25790
25791
2.599 - 3.000” [66.01 - 76.20mm]
25795
25796
25797
OptimaTM
Add-on
Price
**For Group I machines. Not available with shear.
SHAPE DIE
Size
Diameter
Cat No.
I
Up to 1.260” [32.00 mm]
26740
II
Up to 1.528” * [38.80 mm*]
26738
II
1.261 - 3.031” [32.01 - 77 mm]
26726
Price
SHAPE STRIPPER
Description
Cat No.
Group H/I
25359
Keyed
25028
Stripper Pin
25179
Price
RADIUS FOR 45˚ CHAMFER 4
CORNERS
STANDARD SHAPES
PUNCHES
Radius or Chamfer Size
Total Add On
.001 - .062 [0.02 - 1.57mm]
SD Single-D LD Long-D ET Equilateral
Triangle SQ Square HX Hexagon
.063 - .250 [1.58 - 6.35mm]
Greater than .250 [6.35mm]
DIES
Radius or Chamfer Size
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
QD Quad-D OB Obround RT Rectangle OT Octagon
Total Add On
Any Size
U.S.A.
Canada
Mexico
DD Double-D NOTE: For non-rotational keying, see page 3
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
7
STANDARD TOOLS
ROUND SIZE 0, I, II
ROUND PUNCH
Flat
Size
Cat No.
Whisper Shear
Price
Long **
Cat No.
Price
Cat No.
.031 - .236” [0.8 - 6.0 mm]
25008
-
-
25740
0
.237 - .413” [6.01 - 10.5 mm]
25009
-
-
25744
I
.031 - 1.181” [0.80 - 30.0 mm]
25004
25069
II
1.182 - 1.496” * [30.01 - 38.0 mm*]
25035
25071
-
II
1.182 - 1.575” [30.01 - 40.0 mm]
25042
25071
25752
II
1.576 - 2.000” * [40.01 - 50.8 mm]
25043
25072
25756
II
2.001 - 3.000” * [50.81 - 76.2 mm]
25002
25073
25760
0
†
†
Whisper
Shear
Flat
Diameter
Price
OptimaTM
Add-on
25748
-
†Not recommended for punching stainless steel.
*For Group S machines.
**For Group I machines. Not available with shear.
ROUND DIE
Size
Diameter
Cat No.
I
Up to 1.260” [32.00 mm]
26739
II
Up to 1.528” * [38.80 mm*]
26737
II
1.261 - 3.031” [32.01 - 77.00 mm]
26727
Price
*For Group S machines.
Note: For size III tooling, contact our sales desk.
ROUND STRIPPER
Description
Cat No.
Keyed
25006
Group H*/I
25358
Group ‘S’
25032
Non-Keyed
25136
Stripper Pin
25179
Price
ADD ONS
Special Shears
Inverted Rooftop/Single Concave
Add on for Rounds
Small Diameter
Punch
Size I
.031 - .061” [0.79 - 1.56mm]
Size II
.062 - .092 [1.57 - 2.34mm]
Double Valley/Double Concave
Clearance < .004 [0.10mmm]
Size I
Size I
Size II
Size II
Add on for Shapes
Die
Small Width
Size I
Size II
Punch
Die
.031 - .039” [0.79 - 1.00mm]
.040 - .092” [1.01 - 2.34mm]
.031 - .039” [0.79 - 1.00mm]
.040 - .092” [1.01 - 2.34mm]
Clearance < .004 [0.10mmm]
Size I
Size II
8
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
STANDARD TOOLS
STANDARD SHAPES SIZE 0, I, II
Flat
STANDARD SHAPE PUNCH
Flat
Size
Diameter
0
.031 - .236” [0.8 - 6.0 mm]
25022
0†
.237 - .413” [6.01 - 10.5 mm]
I
.031 - 1.181” [0.80 - 30.0 mm]
II
Price
Long **
Cat No.
Price
Cat No.
-
-
25743
25023
-
-
25747
25026
25063
25751
1.182 - 1.496” * [30.01 - 38.0 mm*]
25031
25065
-
II
1.182 - 1.575” [30.01 - 40.0 mm]
25039
25065
25755
II
1.576 - 2.000” * [40.01 - 50.8 mm]
25040
25066
25759
II
2.001 - 3.000” * [50.81 - 76.2 mm]
25001
25067
25763
†
Cat No.
Whisper Shear
Price
OptimaTM
Add-on
Whisper
Shear
†Not recommended for punching stainless steel.
*For Group S machines.
**For Group I machines. Not available with shear.
SHAPE DIE
Size
Diameter
Cat No.
I
Up to 1.260” [32.00 mm]
26740
II
Up to 1.528” * [38.80 mm*]
26738
II
1.261 - 3.031” [32.01 - 77 mm]
26726
Price
*For Group S machines.
SHAPE STRIPPER
Description
Cat No.
Keyed
25028
Group ‘H’/I
25359
Group ‘S’
25030
Non-Keyed
25137
Stripper Pin
25179
Price
RADIUS FOR 45˚ CHAMFER 4
CORNERS
STANDARD SHAPES
PUNCHES
Radius or Chamfer Size
Total Add On
.001 - .062 [0.02 - 1.57mm]
SD Single-D LD Long-D ET Equilateral
Triangle SQ Square HX Hexagon
.063 - .250 [1.58 - 6.35mm]
Greater than .250 [6.35mm]
DIES
Radius or Chamfer Size
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
QD Quad-D OB Obround RT Rectangle OT Octagon
Total Add On
Any Size
U.S.A.
Canada
Mexico
DD Double-D NOTE: For non-rotational keying, see page 3
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
9
HEAVY DUTY TOOLING
ROUND PUNCH
➆
➅
➀
1
1
1
➂
➄
➃
➁
Cat No.
Heavy Duty Flat Punch
.394 - 1.575” [10 - 40mm]
Heavy Duty Whisper Punch
.394 - 1.575” [10 - 40mm]
Heavy Duty Punch (Rooftop)
1.575 - 3.000” [40 - 76.2mm]
Price
Shape
Cat No.
25140
25141
25322
25321
25407
25406
2
Heavy Duty Die
26733
26728
3
Stripper, Keyed
25006
25028
4
Stripper, Non-keyed
25136
25137
5
Stripper Group H
25358
25359
6
Heavy Duty System Collar
25138
25138
7
Spare Collar Key
25142
25142
8
Key Locating Screw
25215
25215
Collar Clamping Screw (not shown)
25216
25216
Die Shim Pack (not shown)
25182
25182
N/A
N/A
Optima
10
Round
Diameter
➇
TM
add-on for punch
Price
FEATURES
DESIGN CRITERIA
INFORMATION NEEDED
The Heavy Duty system is designed
to withstand the higher tonnage
associated with punching and
nibbling thicker materials. The
punch is strengthened by having a
large shoulder, enabling it to
withstand the higher forces
involved. It also has extra back taper
as standard, reducing the galling
and pick-up often associated with
thicker materials. Optima™ coating
on the punch will also greatly
improve performance. The die is
strengthened by a step on the
bottom making the effective
thickness of the die greater.
• Minimum punch dia .394" (10.00mm)
(Below this use standard size 1
punch).
•M
aximum die ‘A’ dimension 2.716" (69mm).
• Uses Heavy Duty system collar.
• Has extra back taper as standard.
• .039" (1.00mm) radius on corners
will increase the life of the punch
and die.
• Rooftop or whisper shear will reduce
the tonnage significantly as long as
the depth of shear is at least half the
thickness of the material.
•H
eavy Duty punch to be used on
material .250" (6.35mm) thick and
above or where punching force is
over 22.5 tons.
•H
eavy Duty die to be used where
punching force is over 20 tons.
•U
ses standard strippers.
• Tools for thicker plate often exceed
the machine tonnage. Ask the sales
desk to check this for you.
•S
ize and shape required
• Material thickness and type
• Machine model
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
KEYED COLLARS & PUNCHES
The Wilson Tool Keyed Collar allows for a keyed punch
to be set at 0°, 45°, 90° or 135° without the use of
Quick Set.This keyed collar is designed for use with
Wilson Tool Keyed Trumpf style punches.
KEYED COLLARS
Description
Cat No.
Size 2 Collar 0º - 45º - 90º - 180º
25317
Price
KEYED PUNCHES
Dimension
Cat. No.
up to 2.380” [60.5mm], Flat
25376
2.380 - 3.000” [60.5 - 76.2mm], Flat
25575
up to 2.380” [60.5mm], Whisper
25576
2.380 - 3.000” [60.5 - 76.2mm], Whisper
25577
Optima
TM
Add-on
Price
Keyed collar fitted to punch
N/A
FEATURES
DESIGN CRITERIA
Because of the rotation feature of
today’s machines, tools often remain
in the holder for longer periods of
time without being checked. With a
keyed punch and collar, a positive key
location between the punch and collar
results in cost savings that are
realized by less scrap and longer tool
life now that punch movement has
been eliminated. The positioning is
100% reliable and repeatable.
The inherent operational margins for
error in the Quick Set System increase
your risk for time consuming and
costly problems. The Wilson keyed
collar provides 100% accurate
alignment every time.
•Fixed slots for greater accuracy
and consistency.
•Reduced downtime. No need to
use Quick Set.
•Much faster than Quick Set
allowing the operator to carry out
further tasks.
•Inherent accuracy reduces the
reliance required on the operator.
•Consequent scrap rate reduction.
The punch cannot turn at all
during operation.
This time-saver works by simply
placing the collar on the punch and
tightening one screw.
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
11
CLOSE-TO-FORM SLITTING/PARTING PUNCH
DURA-BLADE PUNCH ASSEMBLY
Description
Cat No.
Complete punch assembly (includes shims)
26783
Punch insert only
26781
2.5 mm shim pack
26789
Price
WILSON 2-4-1 PUNCH ASSEMBLY
Description
30-60 mm x 5 mm
60-76.2 mm x 5 mm
Cat No.
Cat No.
Price
Complete punch assembly (includes shims)
26802
26800
Punch only
26803
26801
Urethane Strippers (Pair)
26760
26762
Price
STANDARD PUNCH ASSEMBLY
Description
12
30-60 mm x 5 mm
60-76.2 mm x 5 mm
Cat No.
Cat No.
Price
Complete punch assembly (includes shims)
26761
26763
Punch only
25586
25589
Urethane Strippers (Pair)
26760
26762
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
Price
[email protected]
[email protected]
[email protected]
SLITTING/PARTING TOOL DIES
PARTING TOOL DIE ASSEMBLY
lengths up to 2.250” (57.15mm)
widths of .200” [5.08mm] and .250” [6.35mm]
Description
Cat No.
1
Complete Assembly without Blade
25464
2
Blade Fixing Screw
25443
3
Blade, max. length 2.250” [57.15 mm]
25463
4
Shim Pack (not shown)
25439
Price
The blade holder is designed to accept the
interchangeable rectangular die blades, and also any
special shapes with maximum length of 2.250” (57.15mm).
PARTING TOOL DIE ASSEMBLY
lengths up to 3.000” (76.20mm)
widths of .200” [5.08mm] and .250” [6.35mm]
Description
Cat No.
1
Complete Assembly without Blade
25466
2
Blade Fixing Screw
25443
3
Blade, max. length 3.000” [76.20 mm]
25465
4
Shim Pack (not shown)
25441
Price
The blade holder is designed to accept die blades, with
maximum length of 3.000" (76.20mm).
U.S.A.
Canada
Mexico
DESIGN CRITERIA
INFORMATION NEEDED
•S
pecial sizes and shapes available.
Must fit within ranges as specified.
• Maximum material thickness is .118"
(3.00mm).
• Blades can be reground by .039"
(1.00mm) max.
• Must be held flat for regrinding and
coolant must be used.
• To ensure the screws do not come
loose, reassemble using Loctite.
•C
onventional rectangle size or special
size and shape.
• Material type and thickness.
• Machine model.
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
13
QUICK SET SLITTING/PARTING TOOL PUNCH
WITH INTEGRAL COLLAR
QUICK SET PARTING TOOL PUNCHES
Description
The parting tool punches and dies can be used as a
more cost effective slitting method. Instead of replacing
the entire punch and die, only new blades need to be
re-ordered. There are two fixed collar options available,
one at 0° and one at 90°. The fixed collar enables
quicker set up times and greater accuracy.
The blades are available in the following tool sizes:
Length up to 3.000" (76.20mm) and widths available
.200" (5.08mm) and .250" (6.35mm).
(Not standard to North America - 5mm width available)
Special shapes are available to suit your application
(e.g. special inverted diamond blades for microjointing).
*Standard for Trumpf machines
Cat No.
Complete Assembly without Blade 0º (.200”)
25613
Complete Assembly without Blade 90º (.200”) *
25614
Complete Assembly without Blade 0º (.250”)
25611
Complete Assembly without Blade 90º (.250”) *
25612
Location Pin
970416
Blade Locking Screw
25345
0 - 1.181” [30.0 mm] x .200” [5.08 mm] Blade
25605
0 - 1.181” [30.0 mm] x .250” [6.35 mm] Blade
25606
1.181” [30.0mm] - 2.250” [57.15mm] x .200” [5.08mm] Blade
25607
1.181” [30.0mm] - 2.250” [57.15mm] x .250” [6.35mm] Blade
25608
2.250 [57.15mm] - 3.000” [76.2mm] x .200 [5.08mm] Blade
25609
2.250 [57.15mm] - 3.000” [76.2mm] x .250 [6.35mm] Blade
25610
Optima
TM
add-on for punch
Price
N/A
METRIC QUICK SET PARTING TOOL PUNCHES
Not Standard to North America
Description
Cat No.
Complete Assembly without Blade 0º
25600
Complete Assembly without Blade 90º
25602
Location Pin
970416
Blade Locking Screw
25345
56 x 5mm RT Blade with 0.5mm radius
25346
30 x 5mm RT Blade with 0.5mm radius
25347
76.2 x 5mm RT Blade with 0.5mm radius
25414
0 - 30 x 5mm Blade (Special)
25447
30 - 56 x 5mm Blade (Special)
25448
56 - 76.2 x 5mm Blade (Special)
25449
OptimaTM add-on for punch
Price
N/A
FEATURES
DESIGN CRITERIA
INFORMATION NEEDED
The parting tool punch holder is
designed to accept interchangeable
punch blades up to a maximum length
of 3.000" (76.20mm), with widths of
.200" (5.08mm) and .250" (6.35mm).
• Maximum material thickness is .118"
(3.00mm).
• Used with standard stripper.
• Blades supplied only with rooftop
shear.
• Must be reground in vibration free
fixture with coolant.
• Special sizes and shapes available.
Must fit within ranges as specified.
• Conventional rectangle size or
special size and shape.
• Material type and thickness.
• Machine model.
• Optima™ coating option.
The blades have a regrind life of .118"
(3.00mm) and the assembly is limited
to use in up to .118" (3.00mm) material.
Blades are supplied with rooftop shear
as standard to reduce punching force
and noise.
The Parting Punch Assembly is
perma-nently set at 0° or 90°
eliminating any risk of blade
misalignment.
14
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
MULTI-TOOL 4-STATION
FOR TRUMATIC 240R/260R AND GROUP H MACHINES
Note: Max Material
• .125 (3.2mm) Mild steel & Aluminum
• .079 (2mm) Stainless steel
COMPLETE PUNCH AND DIE
ASSEMBLY WITH ALIGNMENT
Description
Cat No.
Trumatic 240R/260R
25888
Group H
25886
Price
PUNCH ASSEMBLY *
Description
Cat No.
Trumatic 240R/260R
25891
Group H
25884
MT4 Alignment Tool
25893
Price
DIE ASSEMBLY *
Description
Cat No.
Trumatic 240R/260R & Group H
25866
Price
*Note: Price does not include inserts.
MULTI-TOOL 4-STATION PUNCH
Description
Cat No.
Round Punch
25151
Shape Punch
25152
Price
Optima Add-on
MULTI-TOOL 4-STATION DIE
Maximum
Punch size:
.630"
(16mm)
Description
Cat No.
Round Die
25153
Shape Die
25154
MT4 Die Shim Pack
25389
Note: All punches and dies will be made for
Position 1 Angle 90˚ unless stated
otherwise.
Round punches Optima™ coated as
standard.
Price
ADD ONS
Add on for Rounds
Small Diameter
Add on for Shapes
Die
Small Width
.031 - .061” [0.79 - 1.56mm]
.031 - .039” [0.79 - 1.00mm]
.062 - .092 [1.57 - 2.34mm]
.040 - .092” [1.01 - 2.34mm]
Clearance < .004 [0.10mmm]
Clearance < .004 [0.10mmm]
Punch
Die
Note: Add $7.25 to round or shape punch for extra straight before radius, extra back taper, or no back taper.
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
15
MULTI-TOOL 6-STATION
FOR TRUMATIC 240R/260R AND GROUP H MACHINES
Note: M
ax Material
• .125 (3.2mm) Mild steel & Aluminum
• .079 (2mm) Stainless steel
COMPLETE PUNCH AND DIE
ASSEMBLY WITH ALIGNMENT
Description
Cat No.
Trumatic 240R/260R
25889
Group H
25887
Price
PUNCH ASSEMBLY *
Description
Cat No.
Trumatic 240R/260R
25892
Group H
25885
MT4 Alignment Tool
25894
Price
DIE ASSEMBLY *
Description
Cat No.
Trumatic 240R/260R & Group H
25863
Price
*Note: Price does not include inserts.
MULTI-TOOL 6-STATION PUNCH
Description
Cat No.
Round Punch
25147
Shape Punch
25148
Price
Note: All punches and dies will be made for
Position 1 Angle 90˚ unless stated
otherwise.
Round punches Optima™ coated as
standard.
Optima Add-on
MULTI-TOOL 6-STATION DIE
Maximum
Punch size:
.413"
(10.50mm)
Description
Cat No.
Round Die
25149
Shape Die
25150
MT6 Die Shim Pack
25388
Price
RADIUS FOR 45˚ CHAMFER 4
CORNERS
STANDARD SHAPES
PUNCHES
Radius or Chamfer Size
Total Add On
.001 - .062 [0.02 - 1.57mm]
SD Single-D LD Long-D ET Equilateral
Triangle SQ Square HX Hexagon
.063 - .250 [1.58 - 6.35mm]
Greater than .250 [6.35mm]
DIES
Radius or Chamfer Size
DD Double-D OB Obround RT Rectangle OT Octagon
Total Add On
Any Size
16
QD Quad-D NOTE: For non-rotational keying, see page 3
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
MULTI-TOOL 5-STATION
5-STATION ASSEMBLY UNITS
Description
Cat No.
Upper Unit Assembly
25957
Lower Unit Assembly
25958
Stripper with 17.2mm Dia. Holes
25959
Fitted Stripper (for thin mat’l only 18 ga. or less)
25960
Price
Note: M
ax Material
• .177 (4.5mm) Mild steel & Aluminum
• .118 (3mm) Stainless steel
MULTI-TOOL 5-STATION PUNCH
Description
Cat No.
Round Punch
25735
Shape Punch
25736
Price
Optima Add-on
MULTI-TOOL 5-STATION DIE
Maximum
Punch size:
.630" (16mm)
Description
Cat No.
Round Die
25737
Shape Die
25738
MT5 Die Shim Pack
26003
Price
Note: All punches and dies will be made for
Position 1 Angle 90˚ unless stated
otherwise.
Round punches Optima™ coated as
standard.
ADD ONS
Add on for Rounds
Small Diameter
Punch
Add on for Shapes
Die
Small Width
.031 - .061” [0.79 - 1.56mm]
.031 - .039” [0.79 - 1.00mm]
.062 - .092 [1.57 - 2.34mm]
.040 - .092” [1.01 - 2.34mm]
Clearance < .004 [0.10mmm]
Clearance < .004 [0.10mmm]
Punch
Die
Note: Add $7.25 to round or shape punch for extra straight before radius, extra back taper, or no back taper.
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
17
MULTI-TOOL 10-STATION
10-STATION ASSEMBLY UNITS
Description
Cat No.
Upper Unit Assembly
25967
Die Holder Assembly Individual Die Design
25985
Stripper with 11.7mm Dia. Holes
25969
Fitted Stripper (for thin mat’l only 18 ga. or less)
25970
Price
Note: M
ax Material
• .177 (4.5mm) Mild steel & Aluminum
• .118 (3mm) Stainless steel
MULTI-TOOL 5-STATION PUNCH
Note: All punches and dies will be made for
Position 1 Angle 90˚ unless stated
otherwise.
Round punches Optima™ coated as
standard.
Description
Cat No.
Round Punch
25809
Shape Punch
25810
Price
Optima Add-on
MULTI-TOOL 10-STATION DIE
Maximum
Punch size:
.413"
(10.5mm)
Description
Cat No.
Round Die
25996
Shape Die
25997
MT10 Die Shim Pack
25995
Price
TRUMPF ORIGINAL DIE DESIGN
RADIUS FOR 45˚ CHAMFER 4
CORNERS
Description
Cat No.
Lower Unit Assembly (no die plate)
25968
Die Plate
25808
Price
STANDARD SHAPES
PUNCHES
Radius or Chamfer Size
Total Add On
.001 - .062 [0.02 - 1.57mm]
SD Single-D LD Long-D ET Equilateral
Triangle SQ Square HX Hexagon
.063 - .250 [1.58 - 6.35mm]
Greater than .250 [6.35mm]
DIES
Radius or Chamfer Size
DD Double-D OB Obround RT Rectangle OT Octagon
Total Add On
Any Size
18
QD Quad-D NOTE: For non-rotational keying, see page 3
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
A-PLUS SERIES
FEATURES
DESIGN CRITERIA
INFORMATION NEEDED
Maximize your "A" dimension with the
A-Plus Series of tooling from Wilson
Tool. This line of Trumpf-style special
tools extends the range of forming in
the A-dimension, allowing for longer
and larger forms. A-Plus offers a full
additional 1.0" [25.4mm] or more in
your forming applications.
Louver
• Max. length is 4.0" [101.6mm].
• Machine and model number
A-Plus Series tooling is available for
most Trumpf Group I machines.
Machine specifications subject to
change. Trumpf-style A-Plus seris
tooling requires a modified cartridge.
Description
Cat No.
A-Plus Cartridge
26296
A-Plus Cartridge for ToolMaster System
26356
Trumpf Die Plate
26215
Cartridge Magnetic Pad
26235
Cartridge Magnetic Pad (5 pack)
26259
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
• Built-in stripping in lower unit for trouble free sheet travel and simple
programming.
• Material thickness and type
• Replaceable forming unit in the die.
Card Guide
• Max. length is 3.4" [86.4mm].
Lance & Form
• Max. length is 3.5" [88.9mm].
• Can be used in many applications, such as for airflow, decoration, location markers sheer tabs, wire harnesses and clip attachments.
Price
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
19
COINING TOOLS
FORM-DOWN / FORM-UP
APPLICATIONS
Countersink
Countersink with counterbore
Counterbore (with hole or without hole)
Chamfered edges
Deburring
Standard
Counterbore w/Hole
Coin w/Counterbore
Blind Counterbore
Coining operations on the punch press eliminate the costly
and time consuming secondary operation of drilling
countersinks.
Pre-punching a hole prior to coining, results in a higher
quality finished form.
FEATURES
• Interchangeable tip for form down countersink allows
you to easily change coin sizes and reduce tooling
costs.
• The form up coin die is made self stripping.
Coined
Countersink
INFORMATION NEEDED
Coined
Counterbore
• Machine model
• Material thickness and type
• Angle, coin diameter, thru-hole
• With or without pilot
• Form-up or form-down
ANGLE
B
B
A
C
FORM DOWN
C
FORM-DOWN
C
B
FORM UP
A
C
Description
Cat. No.
Coining Tool (Solid Style Punch)
25115
Counterbore Tool (Solid Style Punch)
25323
B
ANGLE
Estimated pre-punch formula:
B - [(B - C) X .75] = Pre-punch
20
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
CARD GUIDE
FORM-UP
APPLICATIONS
A card guide is used for retaining printed circuit boards that
require standard lead-in or special lead-in shapes.
Standard
FEATURES
• The replaceable inserts will lower your costs and allow you
to convert them to different size card guides.
• Wilson Tool will estimate the web of material to be formed on
all Card Guides.
• Special lead-ins available – wrap around, closed end, and
angled end.
• The form is internally stripped for best results.
• Wilson Tool will develop the pre-punch shape and size on
special lead-in card guides.
• Tooling is ABS/WLS ready, minimizing wear and maintenance.
• All tools are tested and inspected before shipping.
Wrap Around
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Drawing of card guide desired, center-to-center location and
narrowest pre-punch
• Pre-punch shape: rectangle, obround, or rectangle with
radius corners
Closed End
B
FORM-UP CARD TOOL
Tool Type
Description
Cat. No.
Size II
Maximum 2.756mm
25119
D
C
A
E
F
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
21
EMBOSS
FORM-UP / FORM-DOWN
APPLICATIONS
Embosses, dimples and forming tools are used to create
stand-offs, spacers, countersinks, locks for nuts and logos.
FEATURES
• All tools are made positive form design for a consistent high
quality form.
• Logos embosses and other special shape embosses can be
manufactured easily when an electronic file is provided.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Drawing with dimensions (height, diameter or shape,
angle, radius, through-hole, etc.
• Form-up or form-down
FORM-UP EMBOSS
Tool Type
Description
Cat No.
Size I
With Stripping
25176
Size I
Without Stripping
25194
Size II
With Stripping
25195
Size II
Without Stripping
25143
FORM-DOWN EMBOSS
Tool Type
22
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Description
Cat No.
Size I
Without Stripping
Size II
Without Stripping
25174
Size II
With Stripping
25191
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
EXTRUSION
APPLICATIONS
Extrusions can be used in a broad spectrum of applications,
such as self-tapping screws, cooling tube holders, air flow
applications or tread plate.
FEATURES
• Self-stripping design for consistent, trouble-free operation.
• A wide variety of coatings are available for longer life and
better stripping.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• I.D. and height or screw size and type
• Tolerance of I.D.
• Form-up or form-down
• Specify center-to-center if more than one extrusion exists
on the sheet.
A
FORM-UP EXTRUSION
Tool Type
Description
Cat. No.
Size II
Extrusion Assembly
25144
Size II
Replacement Insert
N/A
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
B
23
HINGE TOOL
APPLICATIONS
Standard fully curled hinge
Offset fully curled hinge
One-hit half knuckle hinge
Standard
Hinge tools eliminate costly hardware, fitting and line-up assembly.
Fabricate complete panels with integrated hinges. A hinge can be
formed on the edge or in the middle of the sheet.
Wilson Tool’s one-hit hinge tool creates multiple half-knuckles that
function as hinges. In one stroke, three or more half-knuckles are
formed – making this tool 900% more efficient than the traditional
hinge. Because this tool does not wipe the material, the One-Hit
Hinge tool can be used for hinges requiring larger diameter pins.
FEATURES
• A standard fully curled knuckle is achieved with two sets of tools.
Offset
• An offset fully curled hinge requires three sets of tools.
• A one-hit half knuckle hinge uses one tool to form three or more
half knuckles, allowing for larger diameter pins.
• The one-hit hinge tool can be used with plastic coated materials.
• Operating instructions with developed dimensions for easy
programming are included with the tools.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Drawing with dimensions - hole diameter or pin size
• Knuckle size
FORM-UP HINGE TOOL
One-Hit
Tool Type
Description
Cat. No.
Size II
First Tool (2 hits/Form)
25116
Size II
Second Tool (1 hit/Curl)
25117
C
A
24
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
B PIN DIA.
[email protected]
[email protected]
[email protected]
PROGRESSIVE RIB
APPLICATIONS
A Progressive Rib from Wilson Tool produces quality
stiffening ribs, programmable to any length.
FEATURES
• Rounded or flat top ribs are available (for best results,
inside radius should be equal to or greater than the
height).
• Run in nibbling mode (recommended incremental
moves equal to the material thickness or less).
• When changing material thicknesses, replace the punch
only.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Drawing with dimensions (B and C)
• Specify center-to-center if more than one form exists on the
sheet.
A
C
THEORETICAL
SHARP
B
“A” dimension programmable to any length
Standard size:B = 3/8" (9.52mm)
C = 3/16" (4.75mm)
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
25
ROLLOVER TOOL
APPLICATIONS
Rollover and Hemming tools can be used in many
applications such as hand holds, wire feeds and
grommets.
FEATURES
• Rollover is achieved in three operations:
1.Pre-punch (developed by Wilson Tool free
of charge)
2.Form-up extrusion
3.Rollover
• Hemming is achieved in three operations:
1.Pre-punch (developed by Wilson Tool free
of charge)
2.Form-up extrusion
3.Flare & Flatten
• Reduces costly secondary operations and handling.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Diameter or length and width (opening)
• Tolerance of opening
• Application (hand hold, wire feed, etc.)
C
ROLLOVER TOOL
B
Tool Type
Description
Cat. No.
Size II
Extrusion (2nd hit)
N/A
Size II
Rollover (3rd hit)
N/A
For prepunch operation use standard round or
shape set price from applicable standards catalog
(1st hit).
Rollover
26
Hemming
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
LANCE & FORMS
APPLICATIONS
Lance and Forms are used for a variety of applications, including air
flow, decoration, location markers, shear tabs, wire harnesses and
clip attachments.
FEATURES
• High-quality lance and forms are assured with Wilson’s
positive form and self-stripping design.
• Optima coating available for extending tool life.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
•
•
•
•
Machine model
Material thickness and type
Drawing with dimensions and pattern if relief is required.
A taper of 5° per side should be added (if possible) to aid in
stripping large station lance and forms.
Tool Type
U.S.A.
Canada
Mexico
WITH
STRIPPING
W/O
STRIPPING
Cat. No. Cat. No.
Cat. No.
Tool Type
Cat. No.
Tool Type
Cat. No.
Size II
25133
Size I1
25463
Size I
Size II
Size II
Single Bridge
25146
25114
25196
Double Bridge
N/A
25075
-
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
LANCE & FORM LESS
THAN 90°
[email protected]
[email protected]
[email protected]
LANCE AND FORM
OF 90°
27
BRIDGE LANCE & FORMS
APPLICATIONS
Bridge type lance and forms can be used for shear stops, locators,
card guides, dividers, ventilation and wire tie downs.
FEATURES
• The Wilson design gives a positive form, which ensures a high
quality part.
• Special lead-ins available
• All bridge tools are made self-stripping
• Optima coating available for extending tool life.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
•
•
•
•
•
•
28
U.S.A.
Canada
Mexico
Machine model
Material thickness and type
Length, width, height and center to center
Drawing of pattern for relief
Top, side and end views
Form-up or Form-down
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
EKO’S
FORM-UP / FORM-DOWN
APPLICATIONS
•
•
•
•
•
Single
Double (concentric or tangential)
Triple (concentric or tangential)
Quad (concentric or tangential)
Standard and special shapes
Single
Wilson Tool’s Electrical Knockout (EKO) design has full
stripping in both upper and lower units, which produce good
quality, reliable knockouts every time. Single or multiple tools
can be used to produce the desired number of EKO’s for your
requirements.
Triple
FEATURES
• Most EKO’s can be used in a small range of material
thicknesses (example: 16-14 gauge/1.5-2mm).
• Available in rounds, standard shapes and special shapes.
• All EKO’s are made with integral collar
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness & type
• Actual diameter
• Specify Standard. or Special tab location & size
• Specify center-to-center if more than one
knockout exists on the sheet
Quad Tangential
Standard Wilson Tool Tab Location
SINGLE EKO’S
Tool Type
Description
Cat. No.
Size II
Round EKO
25111
Size II
Shaped EKO
25189
DOUBLE EKO’S
Tool Type
Description
Cat. No.
Size II
Round EKO
25172
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
29
HALF SHEAR / ROOFTOP HALF SHEAR
APPLICATIONS
Half Shear
The Half Shear from Wilson Tool is an easy-to-use tool that
allows you to put in shear buttons and spot welding locators
to the accuracy of your punch press. Round Half Shears make
excellent locators for angular shearing. Rooftop Half Shears
give you greater height protrusion compared to a standard
half-shear when using thinner material.
FEATURES
Rooftop Half Shear
• Available for Form-up or Form-down applications.
• Rooftop half shear gives you greater height protrusion from
the metal which aids in picking up the locator on the sheet.
• Rooftop half shears have approximately a 3 gauge material
thickness range.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type (or range)
• Diameter or shape (on top of sheet)
• Specify center-to-center if more than one exists on the sheet
Shaped Half Shear
Half Shear
Rooftop Half Shear
A A
A A
30
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
SCRATCH TOOL
APPLICATIONS
A Scratch form can be used for spot welding locators, locators
for angular shearing and shear stops.
FEATURES
• Punches a range of material from .036” [.91mm] to .125”
[3.18mm]
• Height of the stop is .020 [.5mm] to .030” [.8mm]
• Tool is designed with relief for .500” [12.7mm] centers
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Specify top of sheet scratch or bottom of sheet scratch
TOP OF SHEET VIEW
.02
[0.5]
.08
C/L of Tool
.08
Die
Pin
.02
C/L of Tool
BOTTOM OF SHEET VIEW
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
31
LOUVERS & PROGRESSIVE LOUVERS
APPLICATIONS
Louvers are used in a variety of industry applications that
require airflow; Electrical enclosures, HVAC, and food service
equipment.
FEATURES
• Lower costs with replaceable inserts that can be converted
to different size Louvers.
• Optima coating provided on cutting and forming inserts to
extend tool life.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Drawing with dimensions (A, B, C, D, and E)
REPLACEMENT PARTS
Tool Type
Description
Cat No.
Size II
Cutting Blade
N/A
Size II
Forming Insert
N/A
Standard sizes have Optima™ cutting and forming inserts.
PROGRESSIVE LOUVER
APPLICATIONS
The progressive design produces various length
louvers to give flexibility using one tool.
FEATURES
• Program any length louver.
• Run in nibbling mode (recommended incremental
moves equal to the material thickness or less).
• Lower costs with replaceable inserts that can be
converted to different size Louvers.
• Tool is made with integral collar
STANDARD SIZE
32
Tool Type
B
C
D
Cat. No.
Size II
.472” [12.00mm]
.197” [5.0mm]
.787” [20.0mm]
26200
U.S.A.
Canada
Mexico
For Progressive Louvers: “A” dimension is programmable to any length.
Form length on first full hit is approximately 2-1/4" (57mm) long.
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
THREAD FORMS
APPLICATIONS
A Thread Form from Wilson Tool is a great solution for
eliminating secondary operations and supplemental
hardware where a threaded hole is required.
FEATURES
• Reduces costly hardware and assembly time
• Pre-punch information provided.
• Coining is included in the design of the tool when
recommended material thickness is exceeded.
• Optima coating is available to extend tool life.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Thread size and type
THREAD LOOP
APPLICATIONS
A Thread Loop is a great solution for eliminating secondary
operations and supplemental hardware where a threaded hole
is required.
FEATURES
• Allows significant reduction in manufacturing time,
supplemental hardware and assembly time.
• The Wilson design gives a positive form, which ensures a
high quality part.
• Reduces costly hardware and assembly time.
• Optima coating is available to extend tool life.
• All tools are tested and inspected before shipping.
INFORMATION NEEDED
•
•
•
•
•
•
Machine model
Material thickness and type
Number of thread loop tabs
Width of tab
Diameter of opening or screw size and type
Drawing if possible
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
33
CLUSTER TOOLS
APPLICATIONS
Cluster tools are used for air ventilation, drains and filters.
The Cluster tool is the most cost effective method to
manufacture perforated patterns. Cluster piercing is ideal
for applications where tight tolerance is required on the
hole pattern.
FEATURES
• Saves on machine punching time and costly tool
maintenance.
• Holds tight tolerance from hole to hole.
• Available in rounds, standard shapes, special shapes
or any combination required.
• Solid designed punch or replaceable insert style
available on any hole size, shape and pattern.
• The replaceable insert style provides additional cost
savings with replaceable inserts. The added benefit is
the ability to change the cluster pattern, size and
shape by purchasing only the punch tip, inserts, die
and stripper.
• The solid style cluster tends to be less expensive and
can have a shorter lead time.
• Progressive clusters can be designed to finish your
part complete all within one tool: pierce and blank, or
pierce, form and blank.
• Optima coating available and recommended for
extending tool life.
INFORMATION NEEDED
•
•
•
•
•
•
34
U.S.A.
Canada
Mexico
Machine model
Material type and thickness or range
Number of hole clusters
Straight or staggered pattern
Center-to-center dimensions
Replaceable or Solid design
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
LETTER STAMPS
FORM-UP / FORM-DOWN
APPLICATIONS
Letter Stamps eliminate secondary handling costs and
ensures consistent marking. A letter stamping tool is a
perfect solution for permanently marking and displaying
company names, serial numbers, or part numbers.
FEATURES
• Reduces the number of tools needed to mark parts.
• Eliminates secondary stamping operations.
• Form Down Letter Stamp punches made with integral
collar.
• Interchangeable punch tip provides cost savings and
flexibility to change character size by purchasing only
a punch tip and characters.
• Form-Up Letter Stamp tools made with brush inserts
to reduce sheet marking.
INFORMATION NEEDED
• Machine model
• Material thickness and type
• Size character, number of rows, number of characters
per row
LETTER / NUMBER STAMP TOOL
Tool Type
Description
Cat. No.
Size I
Form-Down Letter Stamp 1 Row
26059
Size II
Form-Down Letter Stamp 2 Rows
26060
Size II
Form-Up Letter Stamp 1 Row
26061
Size II
Form-Up Letter Stamp 2 Rows
26062
Note: Multiple rows available upon request.
NO. OF CHARACTERS POSSIBLE IN SINGLE/DOUBLE ROW LETTERSTAMP TOOL
CHARACTER SIZE
MAX CHARCTER/ROW
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
1/16
3/32
1/18
3/16
1/4
3/8
1.58mm
2.38mm
3.17mm
4.76mm
6.35mm
9.52mm
37
23
18
12
9
6
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
35
MULTI-SCRIBE
APPLICATIONS
The Wilson Multi-Scribe is ideal for both sheet scribing and
dot-matrix marking on a wide range of materials. Unique
designs and logos can be achieved just by programming.
Complete Kit Includes:
Punch & Die Assembly
(Assembled with 120° diamond and red medium pressure
spring).
»» 1- Yellow Light Spring
»» 1- Green Heavy Spring
»» 1- 150° Diamond Insert
»» 1- 90° Carbide Insert
»» 1- 3mm Hex Wrench
»» 1- Set of User Instructions
1
2,3,4
FEATURES
•
•
•
•
•
•
5
6
TRUMPF SIZE 2 MULTI-SCRIBE
Use for sheet “scribing” or “dot-matrix” marking
Works on a range of materials.
Variable scribe depth.
Design allows for consistent mark depth.
Long lasting diamond tip.
Won’t deform the material or mark the underside of
the sheet.
Description
1
Cat No.
Trumpf Multi-Scribe Kit
Price
26210
(includes all inserts)
2
Carbide Insert
13563
3
120º Diamond Insert
13564
4
150º Diamond Insert
13565
5
Plastic Scribe Die Insert
12689
6
O-Ring (1” P.D x 3/32)
2282
INFORMATION NEEDED
• Machine model
• Material thickness and type
36
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
STAMPING
APPLICATIONS
Stamping the top or bottom of the sheet is the perfect solution
for permanently displaying company names, serial numbers,
symbols, and product or company logos.
Ground Symbols are widely used in the electrical industry.
Dash tools can be used to “V” notch the sheet to aid in
bending, create numbers and letters, and location marks on
a sheet.
FEATURES
• Ground Symbols are available in stock sizes, form-down or
form-up.
• Dash tools are available in form-down or form-up.
• Dash tools are available in various lengths or can be run
progressively.
• Dash tools can be used to create numbers or letters.
• All form-up tools are designed self-stripping to prevent
sheet marking and tool wear.
• Logos stamps and other special stamps can be
manufactured easily when an electronic file is provided.
INFORMATION NEEDED
• Machine model
• Maximum material thickness and type
• Length of dash
• Size of ground symbol (stock or non-stock)
• Electronic file for logos
• Form-up or Form-down
DASH TOOL
Tool Type
Size I
GROUND SYMBOL
Tool Type
Size I W/Circle
Size I W/O Circle
.375
.375
[9.52]
O .500
.0625
[1.59]
.187
[4.76]
[ O 12.70]
.0625
[1.59]
.125
[3.18]
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
.0625
[1.59]
.187
[4.76]
.125
[3.18]
.250
[6.35]
U.S.A.
Canada
Mexico
[9.52]
GROUND SYMBOL
STOCK DIMENSIONS
.0625
[1.59]
.125
[3.18]
.125
[3.18]
.250
[6.35]
[email protected]
[email protected]
[email protected]
37
ROLLING DEBURR
APPLICATIONS
The Wilson Tool De-Burring tool eliminates the
secondary operation of removing burrs from your
parts.
FEATURES
• Fast and efficiently de-burrs your parts while on
the turret.
• Eliminates costly secondary operation.
• Coins a small chamfer on the cut edge top and
bottom of sheet.
• Can be used to de-burr nested parts.
• Adjust ball pressure without disassembling the
tool.
INFORMATION NEEDED
• Machine model
• Material thickness and type
OPTI-BEND
APPLICATIONS
The Wilson Opti-Bend allows you to achieve
exceptionally high bends up to 90° in your punch
press, eliminating costly time-consuming secondary
operations in a press brake.
Pre-punch
FEATURES
• Performs 90º bends on a punch press with neutral
pull on the sheet (won’t pull out of clamps).
• Special rotating cam design minimizes sheet
marking on soft or high polished materials.
• Available in single hit or progressive styles.
• Possible to achieve 3º over bend.
• Can be run on a small range of material.
INFORMATION NEEDED
• Machine model
Opti-bend
38
• Material thickness and type
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
TAPPING TOOL
APPLICATIONS
The Tapping tool allows you to create high precision
threads at any programmed location on the sheet.
FEATURES
• Available in imperial and metric sizes.
• Works on a wide range of material.
• Stock size pitch inserts and taps are available for
fast delivery.
• A complete instruction manual sent with each
tapping kit.
Extruded Hole Shown
INFORMATION NEEDED
• Machine model
• Material thickness and type
ZIP-TECH®
APPLICATIONS
Our Zip-Tech lance and form tool fabricates snaps to
join metal parts together, eliminating time-consuming
and labor intensive welding and grinding operations,
spot-welding or other fastening methods.
FEATURES
• Zip-Tech Lance is achieved in three operations:
1. Pre-punch – round hole
2. Pre-punch – T-shape hole
3. Zip-Tech Lance and Form
• Different types of materials of the same thickness
can be joined together.
INFORMATION NEEDED
• Machine model
• Material thickness and type
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
39
WILSON WHEEL FAMILY
APPLICATIONS
The Wilson Wheel family of products offers you
flexible, high speed production of slits, ribs and offsets
on a wide range of materials with virtually no burrs or
nibble marks.
ROLLING RIB
FEATURES
• High speed – equal to programmed table travel
speed.
• Create curves, arcs and circles
• Virtually no burrs or nibble marks on the sheet.
• Eliminate scrap with the rolling shear and pincher.
• Replacement forming wheels available.
• Works on a wide range of material.
• Wheel tools can start or end anywhere on the
sheet.
• Stock sizes available for fast delivery.
• A complete instruction manual sent with each tool.
ROLLING OFFSET
ROLLING SHEAR
INFORMATION NEEDED
ROLLING PINCHER
• Machine model
• Material thickness and type
ROLLING FLARE
40
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
SPECIAL SHAPES
4-WAY RADIUS TOOLS - STANDARD SIZES
3
2
1
RADIUS
DIM. 1
INCHES/MM
INCHES/MM
DIM. 2
INCHES/MM
DIM. 3
INCHES/MM
.062 [1.58]
.500 [1.58]
.250 [6.35]
.062 [1.58]
.094 [2.39]
.625 [2.39]
.250 [6.35]
.094 [2.39]
.125 [3.18]
.625 [3.18]
.250 [6.35]
.125 [3.18]
.156 [3.96]
.750 [3.96]
.250 [6.35]
.156 [3.96]
.188 [4.78]
.750 [4.78]
.250 [6.35]
.188 [4.78]
.250 [6.35]
.875 [6.35]
.250 [6.35]
.250 [6.35]
.312 [7.93]
1.000 [7.93]
.250 [6.35]
.312 [7.93]
.375 [9.53]
1.125 [9.53]
.250 [6.35]
.375 [9.53]
.500 [12.7]
1.250 [12.7]
.250 [6.35]
.500 [12.7]
INVERTED DIAMOND
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
41
SPECIAL SHAPES
GROUP “A”
Note: Special Considerations May Alter Price and Lead Time
2
3
2
2
1
1
4
1
4
3
2
3
1
S1
S3 -S3A
S4
6
2
S7
2
3
60˚
5
6
3
S8
3
4
3
1
2
1
5
6
4
4
1
2
7
S9
5
S23A
2
S50
4
4
4
1
4
7
S23
3
2
3
1
S51
3
4
3
1
3
2
1
2
1
1
5
1
2
5
3
2
S59
S65
3
4 Flat
S69
2
3
4
5
2
5
2
S95L
S81
1
1
1
5
1
6
4
4
42
1
2
S95W
S97
3
2
3
S100
U.S.A.
Canada
Mexico
7
3
S102
S103
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
S105
[email protected]
[email protected]
[email protected]
SPECIAL SHAPES
GROUP “A”
4
3
1
4
1
1
2
2
2
5
3
2
5
3
3
2
6
6
1
3
1
4
4 QTY OF SIDES
5
S108
S106
2
2
3
4
3
1
S121
S110
S109
6
5
4 QTY OF SIDES
3 QTY OF SIDES
1
8
6
1
3
3
2
1
4
4
S123
S122
6
1
2
S124
7
2
S161
S162
2
3
4
2
4
3
7
5
3
7
6
1
1
1
5
5
4
2
3
S163
2
5
RAD
(4X)
6
5
4
3
2
1
1
(T.S.)
1
4
2
2
5
3
S170
U.S.A.
Canada
Mexico
S167
3
1
DIA
4
RAD
(2X)
5
2
S166
S165
2
4
4
5
3
1
6
1
3
S164
2
1
4
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
S181
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
SQF
[email protected]
[email protected]
[email protected]
PN
RTF
43
SPECIAL SHAPES
GROUP “B”
3
3
4
1
2
5
5
2
1
1
S10
S11
5
4
3
RAD
6 Quanity of Tabs (2)
1
1
S6
S12
S13
4
3
4
5
1
4
RAD
(2X)
3
2
2
2
4
7
4
3
3
4
5
2
1
4
1
1
1
2
3
2
DIA
2
2
3
S14
S15
S16
2
5
RAD
(8X)
3
S17
2
4
S18
4
5
2
2
2
1
4
RAD
(8X)
3
RAD
(4X)
4
(4X)
S19
3
RAD
(4X)
4
RAD
(8X)
S19A
5
3
3
RAD
(4X)
7
S20
4
5
2
3
1
4
6
5
1
S22
44
3
6
1
3
3
2
6
3
S21
1
1
2
1
3
6
S19B
4
7
5
S24
2
S30
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
1
2
1
DIA
2
2
6
6
4
4
5
S31
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
S33
[email protected]
[email protected]
[email protected]
SPECIAL SHAPES
GROUP “B”
DIM 2
1
DIM 5
1
5
3
4
RAD
8
RAD
7
3
RAD
3
2
5
RAD
8
2
2
7
4
4
9
8
6
3
DIM 1
DIM 8
(4X)
1
7
DIM 6
7
RAD
5
2
DIM 4
6
RAD
1
5
6
4
DIM 3
6
DIM 7
S35
S36A
S36
S37
S40
7
2
2
5
5
1
3
4
6
1
2
2
3
4
3
4
1
1
5
5
1
3
3
4
2
6
4
6
9
8
S41
S42
S43
3
2
4
RAD
(2X)
4
S46
2
3
4
3
S54
3
5
3
1
1
5
5
RAD
(2X)
1
6
2
S55
4
S56
2
5
3
1
4
RAD
(2X)
1
3
2
1
S57
5
RAD
(4X)
2
5
6
2
DIA
5
RAD
(4X)
4
4
1
S58
7
S60
1
5
3
1
4
2
6
2
6 QTY OF TABS
5
4
3
S61
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
S62
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
S66
[email protected]
[email protected]
[email protected]
S79
S82
45
SPECIAL SHAPES
1
2
GROUP “B”
5
2
4
3
5
3
2
1
2
6
3
3
1
6 QTY OF SLOTS
S83
4
S84
6
2
4
3
6
4
1
1
1
5
2
S87
2
S88
S91
4
4
4
5
8
6
2
3
3
1
1
5 QTY OF LOBES
9
1
2
2
3
4 QTY OF ENDS
1
6 QTY OF LOBES
3(TS)
5
1
5
2
4
3
S93
7
S114
S115
5
9
3
S116
S117
2
2
3
8
3
5
3
1
4 QTY OF TIPS
4
2
1
4 QTY OF ENDS
4
2
1
6 QTY OF TABS
7
1
S118
S119
7 QTY OF SLOTS
5
2
3
4
S120
5
RAD
(TYP)
S125
S126
4
RAD
(4X)
4
6
RAD
(TYP)
3
1
1
3
RAD
4
3
RAD
1
3
1
4
6
1
DIA
6 QTY OF TABS
2
2
2
5
RAD
(4X)
2
S127
46
S128
S141
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
S141A
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
S142
[email protected]
[email protected]
[email protected]
SPECIAL SHAPES
GROUP “B”
16
8
15
6
7
17
4
5
4
5
2
4
2
6
12
13
2
7 (TYP)
14
8 QTY OF TABS (4)
1
1
S168
6
5
RAD
(4X)
5
15
(2X)
7
RAD
1
16
(2X)
2
5
6
4
1
DIA
9
S174
4
3
3
3
RAD
2
S172
2
4
RAD
10
RAD
12
11
13
RAD
8
3
1
S171
S169
14
RAD
(8X)
4
RAD
2
5
1
3
4
9
10
11
3
3
S176
1
2
5
1
DIA
S177
3
RAD
(4X)
5
RAD
(8X)
6 QTY
OF WEBS
S179
GROUP “C”
Any complex 2D shape ordered with a DXF file will be priced as a
“B” Group. Electronic file will be validated at the time of ordering.
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
47
SPECIALS - LARGE DIAMETER HOLE PUNCHING
Machines with Rotation
When a hole larger than the capacity of the machine is required, Rotation machine users have three options. All three
options give good quality holes, virtually free from any scallop marks associated with a nibbled hole using a round punch.
Tool Shape
S6
Tool Shape
S141
Tool Shape
S165
Punching Pattern
Punching Pattern
Punching Pattern
FIGURE 2
FIGURE 3
FIGURE 1
Figure 1: This tool is designed so that
all the scrap material is removed
through the die, thus eliminating the
need to stop the machine to remove
waste material. You may have FOUR
different radii with this tool.
Figure 2: This type of tool is used by
slitting around the diameter required
and removing the material at the
center. The advantages with this design
are that fewer hits are required, you
may punch round blanks, using the
inside radius or round holes, using the
outside (or both).
Figure 3: This design is for use as
Figure 2, but with square ends, half
circles etc., may be produced.
Non-Rotation Machines
When trying to punch a larger hole than the diameter of the largest station in the machine, our recommendation is a
four-sided punch as shown below. The tool is designed so that each of the four faces are equivalent to 1/8 of the circle
desired.
The circle is then obtained by using the two punches, one keyed at 0° and the other at 45°, and making the four hits
with each punch (see punching pattern). Your hole is obtained with the minimum number of hits and no scalloping. As
an extra bonus the tool is designed so that no material is left to be removed from the center of the circle.
TOOL SHAPE
48
PUNCHING PATTERN
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
Increase Grind Life with Trumpf® Style Dies
Cut your costs and save valuable time by increasing your grind life up to 150% with Wilson’s
Trumpf “GL” (Grind Life) dies and die plate. These products enable you to shim your dies up to
2.5mm instead of the current 1.0mm maximum.
GL Die
The radius profile of the Trumpf GL die has been changed
to allow up to 1.5mm of grind life with the standard die plate, or 2.5mm with the GL die
plate, while still having
radius left to allow the sheet to flow over the top of the die.
GL Die Plate
The Wilson GL die plate key allows for the die to be shimmed up to 2.5mm while still maintaining key engagement.
The GL size 2 die plate key contains a spring loaded ball plunger to better secure the dies,
and is coated with Wilson Tool’s Wearbeater coating for easy
identification. The key is available separately and is compatible with standard die plates.
Contact your Wilson Tool Sales Engineer for more information on the Trumpf GL style dies,
or call 800-328-9646.
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
49
NOTES
50
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
wilsontool.com is your
online source for the latest
news and information from
Wilson Tool. Available in
seven languages,
wilsontool.com is a great
resource for all of our
customers around the globe.
Our e-newsletters not only keep you up to date on the
latest product and company news along with workshop
and class information, but each month we provide a
solutions-based article to improve performance and
productivity in your shop.
Register at wilsontool.com
e-Business Center
Request a quote. Place an order. Review your account
history. Track a shipment. Even download special tool
drawings to easily program your machines. 24 hours a
day, 7 days a week.
Log-on or register your account at wilsontool.com/ebiz.
YouTube
Wilson Tool’s YouTube channel contains many videos
featuring product demonstrations showing our tooling in
action. Visit us at
http://www.youtube.com/user/wilsontooltube
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800.668.9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]
51
WILSON TOOL INTERNATIONAL
WORLD HEADQUARTERS
EUROPE / MIDEAST / AFRICA
Wilson Tool International - United States
Wilson Tool - United Kingdom
Tel (Free): 800-328-9646 | Tel: 651-286-6001
Fax (Free): 800-222-0002 | Fax: 651-286-5959
Email: [email protected]
Tel (Free): 0800-373748 | Tel: +44 1793 831818
Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46
Email: [email protected]
NORTH AMERICA
Wilson Tool - Germany
Wilson Tool - Canada
Tel (Free): 00800-9457668665 | Tel: +49 5723 747 0
Fax (Free): 00800-945766329 | Fax: +49 5723 747 10
Email: [email protected]
Punching and Stamping Division
Tel: 800-268-5573 | Fax: 800-668-9314
Email: [email protected]
Wilson Tool - Denmark
Tel (Free): 80 20 20 24 | Tel: +45 44 53 1699
Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607
Email: [email protected]
Wilson Tool - Canada
Press Brake Division
Tel: 800-268-4180 | Fax: 905-840-1032
Email: [email protected]
Wilson Tool - France
Wilson Tool - Mexico
Tel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81
Email: [email protected]
Tel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599
Email: [email protected]
Wilson Tool - South Africa
SOUTH AMERICA
Tel: +27 11 849 1955 | Fax: 086 657 8629
Email: [email protected]
Toolspress - Italy
Wilson Tool - Argentina
Tel: +39 0521 850510 / 850677
Fax: +39 0521 850796
Email: [email protected]
Tel: +5411 4799 6519
Email: [email protected]
Milling Ferramentas - Brazil
Tel/Fax: 55 11 5621-2100
Email: [email protected]
CHINA / PACIFIC RIM
Wilson Tool - China
Tel: +86 21 51089638 | Fax: +86 21 64422195
Email: [email protected]
P209C
2015
© 2015 Wilson Tool International
b
U.S.A.
Canada
Mexico
Tel: 800.328.9646
Tel:800.268.5573
Tel: 001.800.741.2510
Fax: 800.222.0002
Fax: 800-668-9314
Fax: 001.800.544.2096
[email protected]
[email protected]
[email protected]