Series 400 Autovalve With meter mix and dispense systems, the pneumatic Series 400 Autovalve is a durable and reliable valve. The A and B shut off pistons have PTFE seals allowing high flow with minimal maintenance as these seals can be adjusted without disassembly of the valve body. The 9/16-18 fluid inlet ports of the Series 400 Autovalve allow flow rates of 3-4 gallons per minute, depending on pump capability and material viscosity. Features Performance Guarantee • Dispenses two-component adhesives and sealants • Dispenses low- to high-viscosity urethanes, epoxies, and silicones • Can be mounted for beads or timed shots; optional handle is available for handheld applications • Provides an ON-OFF function. The metering of the adhesives in the proper ratio of A:B is controlled by the metering pumps. • Flow rates of 3-4 gallons/minute, depending on pump and material viscosity • Materials remain separate until they enter the mixer • Available in aluminum or stainless steel configurations • Manual, robotic, or stationary operation Specifications • Valve Size: 3.3" x 2.5" x 2.3" (132 mm x 63.5 mm x 58.4 mm) Body Material: 6061-T6 Aluminum or 303 Stainless Steel O-ring Options*: Viton®, PTFE, Ethylene-Propylene (E-P) Lip Seal Options*: Viton, Polyurethane (PU), PTFE, Polytuff, Ethylene-Propylene (E-P) *Repair kits containing a complete set of lip seals and O-rings are available. • Weight • Manifold Aluminum Valve and Manifold: Size: 1.9" x 2.5" x 1.5" 1.6 lb (0.7 kg) (48.3 mm x 63.5 mm x 38.1 mm) Stainless Steel Valve and Manifold: Material: 6061-T6 Aluminum 2.5 lb (1.1 kg) or 303 Stainless Steel Options: 1:1 Ratio (with or without • Operating Parameters solvent port ) Min. Operating Pressure: Wide Ratio (with or without solvent 80 psi (5.5 bar) port) Max. Fluid Pressure: Outlet Thread Size Options: 3500 psi (240 bar) 7/8"-14 (for standard bell mixers); Electric Handle Mount Switch: 24V 1 5/16"-12 (for oversized bell mixers) Series 400 Autovalves and Manifolds Part # Component Ratio Flow Rate 7701895 (400-100HATPV) Alum. Valve, Single Air Cylinder, TPV Seals – – 7701908 (400-100HBTPV) Alum. Valve, Double Air Cylinder, TPV Seals – – 7702095 (410-100HATGT) Stainless Steel Valve, Single Air Cylinder, TGT Seals – – 7701933 (400-M160-A) Aluminum Manifold 1:1 Low Flow 7701935 (400-M160-B) Aluminum Manifold with Air/Solvent Flush Valve 1:1 Low Flow 7701938 (400-M160-D) Aluminum Manifold Wide Low Flow 7701940 (400-M160-E) Aluminum Manifold with Air/Solvent Flush Valve Wide Low Flow 7701942 (400-M160-G) Aluminum Manifold 1:1 High Flow 7701943 (400-M160-H) Aluminum Manifold with Air/Solvent Flush Valve 1:1 High Flow 7701946 (400-M160-J) Aluminum Manifold Wide High Flow 7701949 (400-M160-K) Aluminum Manifold with Air/Solvent Flush Valve Wide High Flow 7702109 (410-M160-A) Stainless Steel Manifold 1:1 Low Flow 7702110 (410-M160-B) Stainless Steel Manifold with Air/Solvent Flush Valve 1:1 Low Flow Accessories Static Mixers Mixer selection is critical when it comes to curing two-component adhesives and sealants. EFD offers a wide range of Series 160 Disposable Plastic Spiral Bell Mixers with different diameters, lengths, geometries, and orifices to meet many different applications. Pistol Grip Handles Fluid Inlet Adapter Nordson EFD offers electric or pneumatic handles for actuating the air cylinder of the valve. If using an electric handle, a solenoid from an outside vendor is required. EFD also offers a stationary swivel base for applications where mobility is not required. Elbow adapters are available to connect the material lines to the valve. Carbon Steel Adapters Part # Description 7702407 (451-F2EFNPT-75E) 90° Elbow w/1/4" FNPS 7702414 (451-F2EMNPT-75E) 90° Elbow w/1/4" MNPT Part # Description 7701971 (400-MOUNT-E01) w/Electric Momentary Switch (24V) 7702416 (451-F2SFNPT-75E) Straight Adapter w/1/4" FNPS 7701973 (400-MOUNT-E02) w/Electric Push On/Off Switch (24V) 7702419 (451-F2SMNPT-75E) Straight Adapter w/1/4" MNPT 7701977 (400-MOUNT-H01) w/Pneumatic Switch 7702420 (451-F3EFNPT-75E) 90° Elbow w/3/8" FNPS 7702424 (451-F3EMNPT-75E) 90° Elbow w/3/8" MNPT 7702425 (451-F3SFNPT-75E) Straight Adapter w/3/8" FNPS 7702428 (451-F3SMNPT-75E) Straight Adapter w/3/8" MNPT Metal Jackets Metal Jackets are available for all mixers. EFD recommends using it when the working pressure inside the mixer is greater than 150 psi (10 bar). Part # 316 Stainless Steel 37° JIC Adapters Part # Description Description 7702413 (451-F2EJIC-98E) 90° Elbow w/1/4" Male JIC Straight Adapter w/1/4" Male JIC 7701124 (165-424J-A-14) Alum., Robotic 7702418 (451-F2SJIC-98E) 7701135 (165-616JL-9) Aluminum 7702423 (451-F3EJIC-98E) 90° Elbow w/3/8" Male JIC 7701138 (165-624J-A-14) Alum., Robotic 7702427 (451-F3SJIC-98E) Straight Adapter w/3/8" Male JIC 7701140 (165-624JL) Aluminum 7701143 (165-632JL) Aluminum Ordering Guide 7701147 (165-648JL) Aluminum 7701155 (165-724JL-9) Aluminum • Valve, manifold, and handle are ordered individually • Optional pistol grip handles and swivel base are available • For high back pressure conditions (i.e. over 1,000 psi/69 bar) order a double air cylinder • Seal Designations: T=PTFE, P=Polyurethane, V=Viton, G=Polytuff 7701163 (165-818JL-9) Aluminum 7701167 (165-824JL) Aluminum 7701165 (165-824J-A-14) Alum., Robotic 7701171 (165-830JL) Aluminum 7701170 (165-830J-A-14) Alum., Robotic 7701174 (165-840JL) Aluminum 7701186 (165A-818J-A-14) Alum., Robotic 2 7701191 (165A-824J-A-9) Alum., Robotic 7701193 (165A-824JL-9) Aluminum 7701203 (166-224J) CS Nut / SS Jacket 7701208 (166-224J-A-14) Alum., Robotic 7701210 (166-230J) CS Nut / SS Jacket 7701216 (166-236J-01) CS Nut / CS Jacket 7701397 (185A-818J-A-9) Alum., Robotic Repair Kit Part # Description 7704092 (AV-RK-TFV) 2K Kit 4X0 Repair TFV 7704093 (AV-RK-TGT) 2K Kit 4X0 Repair TGT 7704094 (AV-RK-TGV) 2K Kit 4X0 Repair TGV 7704095 (AV-RK-TPV) 2K Kit 4X0 Repair TPV 7704096 (AV-RK-TTT) 2K Kit 4X0 Repair TTT 7704013 (400-RK-HF-TPV) 2K Kit 400HF Repair TPV For Nordson EFD LLC sales and service in over 40 countries, contact Nordson EFD or go to www.nordsonefd.com Global East Providence, RI USA 800-556-3484; +1-401-431-7000 [email protected] Europe Dunstable, Bedfordshire, UK 0800 585733; +44 (0) 1582 666334 [email protected] Asia [email protected] China: +86 (21) 3866 9006; [email protected] India: +91 80 4021 3600; [email protected] Japan: +81 03 5762 2760; [email protected] Korea: +82-31-736-8321; [email protected] SEAsia: +65 6796 9522; [email protected] ©2015 Nordson Corporation v012815
© Copyright 2024