Mise en page 1

WEDNESDAY, MARCH 25, 2015
8:30 - 9:00
9:00 - 9:20
9:20 - 9:45
9:45 - 10:10
10:10 - 10:35
10:35 - 11:00
11:00 - 11:20
11:20 - 11:45
11:45 - 12:10
12:10 - 12:35
12:35 - 13:00
13:00 - 14:00
14:00 - 14:25
14:25 - 14:50
14:50 - 15:15
15:15 - 15:40
15:40 - 16:00
REGISTRATION
WELCOME ADDRESS
Jacques RENARD - Chairman of the conference
SESSION N°1 – Experimental Methods for Fatigue Damage Characterization
16:00 - 16:25
16:25 - 16:50
CHAIRMAN :
16:50 - 17:15
Impact Damage and Multiaxial Fatigue Behaviour of NCF
Bodo FIEDLER, Technische Universität Hamburg - Harburg
17:15 - 17:50
Evaluation of Transverse Crack Initiation in Cross-Ply CFRTP Laminates Under Fatigue Loading
Atsushi HOSOI, Waseda University
Direct Approach Based on Damage Stabilization Effects for Life Prediction
of Fiber Reinforced Polymers
Dmytro VASIUKOV, Ecole des Mines de Douai
Accelerated Fatigue Testing and Damage Analysis of CR-PPS at Very High Number
of Cycles by Using a New Ultrasonic Fatigue Testing System
Frank BALLE, University of Kaiserslautern, Institute of Materials Science and Engineering (WKK)
Coffee Break
SESSION N°2 – Health Monitoring and Fatigue Life Prediction
CHAIRMAN :
Self-Heating method for fatigue limit determination on thermoplastic composites
Catherine PEYRAC, CETIM
Thermographic Monitoring of Damage of DCFC Composites Submitted to Static
and Fatigue Loadings
Emmanuel VALOT, Université Paris Ouest
Assessment of Fatigue Damage Initiation and Progression in CFRP Using
Synchrotron Radiation Computed Tomography
Serafina Consuelo GARCEA, University of Southampton
Self-Heating Based Fatigue Damage Monitoring of Woven Composite Materials
Gabriele BAI, ONERA
Lunch
SESSION N° 3 – Cyclic Behavior of Textile Composites
CHAIRMAN:
Kinetic Damage Model for Multiaxial Random Fatigue of Woven Interlock Composite
Lise ANGRAND, LMT Cachan
Effect of Load Ratio, Testing Frequency, Temperature, Moisture, Notch and Stacking
Sequence on The Fatigue Resistance of Woven CFRP Laminates
Frédéric LANI, Pôle IMAP - Université Catholique de Louvain
A Cyclic Damage Model for Fatigue of Woven Interlock Composite
Myriam KAMINSKI, ONERA
Effect of Environment on Microcracking Induced by Thermal Cycling in 3D Woven
Polymer Matrix Composites
Camille GUIGON, Pprime Institute
Coffee Break
SESSION N°4 – Fatigue of Assemblies with Composites
CHAIRMAN :
Fatigue Behavior of Adhesive Joints
Jacques RENARD, MINES ParisTech
A Damage-Based Criterion For Mixed Mode Crack Propagation in Composite
Bonded Joints Under Fatigue Loading
Paolo Andrea CARRARO, University of Padova
Contact-Free Control of Composites and Adhesive Assemblies by Ultrafast
Pulsed Terahertz Sensing
Uli SCHMIDHAMMER, Université Paris Sud, LCP
Fatigue Behavior Analysis of Adhesively Bonded CFR-PEEK Composites Using Dissipated
Energy and Acoustic Emission Monitoring
Reda ElHak OURAHMOUNE, Ecole Centrale de Lyon
THURSDAY, MARCH 26, 2015
9:00 - 9:25
9:25 - 9:50
9:50 - 10:15
10:15 - 10:40
10:40 - 11:00
11:00 - 11:25
11:25 - 11:50
11:50 - 12:15
12:15 - 12:40
12:40 - 14:00
14:00 - 14:25
14:25 - 14:50
SESSION N°5 – Interface Toughness Characterization, Fatigue Delamination
CHAIRMAN :
Fracture Resistance of an Interface Crack Emanating From a Bi-Material V-Notch Tip
Naman RECHO, EPF
Detection of Crack Initiation on Notched Specimens of Short Fiber Reinforced
Polyamide Under Fatigue Loading
Enrico BELMONTE, Robert Bosch GmbH, University of Padova
Fatigue Delamination Propagation at High Frequency of a CFRP UD Material
Laurent MICHEL, ICA/ISAE
Fatigue Delamination at the Edges of Composite Laminates and Bonded Assemblies
Elise GAY, MEDYSYS
Coffee Break
SESSION N°6 – Multiaxial Fatigue Analysis, Environmental Effect
CHAIRMAN :
Durability and Thermo-Oxidation Behaviour of Organic Matrix
Composite Materials at High Temperatures
Jacques CINQUIN, AIRBUS
Characterization of Crack Length Dependency for Delamination Fatigue Crack Growth
Behavior in Toughened CFRP Laminates
Masaki HOJO, Kyoto University
Synergistic Damage Mechanic Model for Multi-Directional Stiffness Properties
in Composite Laminates
Shen HAOJIE, Nanjing University of Aeronautics and Astronautics
The Multiaxial Fatigue Analysis of Multilayered Composite Plate With Internal Delamination
Pawel ROMANOWICZ, Cracow University of Technology, Institute of Machine Design
Lunch
SESSION N°7 – Micro-Structurally Approach and Multi-Scale Analysis
CHAIRMAN :
Micromechanical Investigation of Fatigue Damage in Uni-Directional Fibre Composites
Kristine Munk JESPERSEN, Technical University of Denmark (DTU)
Durability Assessment of a Pultruded Thermoplastic Reinforced Composite :
Experimental And Microstructural Simulations of The Transverse Damage Kinetics
Pierre-Alexis POULET, MINES ParisTech
14:50 - 15:15
15:15 - 15:40
15:40 - 16:00
16:00 - 16:25
16:25 - 16:50
16:50 - 17:15
17:15 - 17:40
SESSION N°7 – Micro-Structurally Approach and Multi-Scale Analysis
CHAIRMAN :
Degradation Mechanism of Short-Fibre Reinforced Polyamide Due to Uniaxial
Fatigue Loading Evaluated by Non-Destructive Testing and Fractography
Volker TRAPPE, BAM
Matrix Damage Under Combined Transverse/Shear Loads in Static and Fatigue
Christian HOCHARD, CNRS - Aix Marseille University
Coffee Break
SESSION N°8 – Additive Constituents for Fatigue Life Extension
CHAIRMAN :
Fatigue Life Extension of Carbon Fiber/Epoxy Composites Due to an Addition
of a Little Amount of Submicron Fiber to the Matrix
Toru FUJII, Doshisha University
A Study on The Microscopic Stress Concentrations in The Matrix
in a Short Fiber Reinforced Polyamide Under Fatigue Loading
Enrico BELMONTE, Robert Bosch GmbH, University of Padova
Research on Fatigue Degradation of Elastic Modulus for Composite Materials
Fuqiang WU, Nanjing University of Aeronautics and Astronautics
Application Of Spread Carbon Fiber Tows to Improve Fatigue Properties of CFRP
Modified With Cellulose Nano Fiber (CNF)
Ryo UMEKI, Doshisha University
FRIDAY, MARCH 27, 2015
9:00 - 9:25
9:25 - 9:50
9:50 - 10:15
10:15 - 10:40
10:40 - 11:00
11:00 - 11:25
11:25 - 11:50
11:50 - 12:15
SESSION N°9 – Statistical Analysis and Damage Modeling for Fatigue Life Prediction
CHAIRMAN :
Statistical Model for Prediction of Transverse Cracking in Laminates Subjected to Cyclic Loading
Andrejs PUPURS, Luleo University of Technology
The Analytical Estimation of Damage Origin
Telman D. KARIMBAEV, CIAM
Comparison Between Three Fatigue Damage Models and Experimental Results
for Composite Materials Submitted to Spectrum Loading
Mohammed BOUSFIA, ENSAM
Optimization and Fatigue Damage Assessments of Isotropic
and Composite Structures - A Review
Agnieszka BONDYRA, Cracow University of Technology, Institute of Machine Design
Coffee Break
SESSION N°10 – Environmental Effects on Durability of Composites
SESSION N°10 – Environmental Effects on Durability of Composites
12:15 - 12:40
12:40 - 14:00
14:00 - 14:25
Lunch
SESSION N°11 – Micro-Structurally Approach and Multi-Scale Modelling
14:50 - 15:15
CHAIRMAN :
Fiber Reinforced Plastic Durability: Multi-Scale Modeling Interfacing Fundamental
Material Research and Industrial Structural Applications
Benoît BIDAINE, e-Xstream engineering
Inter Fiber Cracking Behaviour of CFRP Under Very High Cycle Fatigue Loading
Ilja KOCH, Institute of Lightweight Engineering and Polymer Technology, TU Dresden
15:15 - 15:40
15:40 - 16:00
Laminate Fatigue Damage and Fiber Fracture
Christian HOCHARD, CNRS - Aix Marseille University
A Model For the Prediction of The Crack Density Evolution in Multidirectional
Laminates Under Fatigue Loading
Marino QUARESIMIN, University of Padova
POSTERS
Closure Address
Benoît BIDAINE
e-Xstream engineering
Fatigue of Carbon/Epoxy Laminates: Beyond Experimental Testing
Thanks to Multiscale Modeling
Paolo Andrea CARRARO
University of Padova
Self Sensing Glass/Epoxy Cross-Ply Laminates For Damage Monitoring Under Fatigue
Loading: Modelling and Experiments
Lars Pilgaard MIKKELSEN
DTU Wind Energy
Fatigue Testing Uni-Directional Composite Materials for Wind Turbine Blades
Carole RAKOTOARISOA
Snecma Villaroche,
Safran Group
On the Interest of Using a Fatigue Damage Model for Woven Interlock Composite
on Industrial Applications
Martin BUGAJ
University of Zilina
Ajit KELKAR
Joint School of Nanoscience
and Nanoengineering
Characterization of Basalt Fiber Composites in Aeronautical Applications
Fatigue Behavior Of Boron Nitride Nanomodofied Carbon Epoxy Composite
Marino QUARESIMIN
University of Padova
Observations of Damage Evolution at The Microscopic Scale in Off-Axis Plies Under
Fatigue Loading
Harouz RIAD
Université de Bouira Algérie
Measurement of Lifetime of Roller in Terms of Thermomecanical Parameters
Houssam TOUTANJI
University of Alabama
in Huntsville
Flexure Behavior of FRP Strengthened Reinforced Concrete Beams
Under Fatigue Loading
Junda ZONG
Nanjing University of
Aeronautics and Astronautics
Life Prediction for FRP Structure Based on Modulus Monitoring
Agnieszka RUTECKA
IPPT PAN
Influence of Matrix Ductility on The High-Temperature Fatigue Behavior
of Notched Woven-Ply Thermoplastic and Thermoset Laminates
Benoît VIEILLE, INSA ROUEN
Houssam TOUTANJI
University of Alabama
in Huntsville
Influence of The Surface Finish on Fatigue Properties of SFRP Under
Mechanical and Environmental Loads
Michael MAGIN, Institut füt Verbundwerkstoffe
Curing Effect on Polymeric Matrix Composite Behavior Under
Tension-Compression Fatigue Loading
Ajit KELKAR, Joint School of Nanoscience and Nanoengineering
14:25 - 14:50
CHAIRMAN :
Multi-Physical Fatigue of Laminated and Textile Organic Matrix Composite
Materials for Aircraft Applications
Marco GIGLIOTTI, Institut P' - University of Poitiers - CNRS - ISAE-ENSMA
CHAIRMAN :
Global And Local Fatigue Damage Evolution of AA2124/SiC Metal Matrix Composites
Performance of Lunar Sulfur Concrete