Download Report

LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763
E-mail: [email protected]
HP A 5120-24G EI (JE066A#ABB)
HP 5120-24G EI Switch
PDF generated on: 6 February, 2015
Price details:
Price excl. VAT: 935.95 €
Eco fees: 0.00 €
VAT 21 %: 196.55 €
Product details:
Product code: JE066A#ABB
EAN: 0885631201237
Manufacturer: HP
1,132.50 €
* VAT included
Overview
The HP 5120 EI Switch Series is comprised of Gigabit Ethernet switches that support static Layer 3 routing, diversified
services, and IPv6 forwarding, as well as provide up to four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique
Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical
device, which increases network resilience, performance, and availability, while reducing operational complexity. These
switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data
centers. High scalability provides investment protection with two expansion slots, each of which can support two-port
10GbE expansion modules. High availability, simplified management, and comprehensive security control policies are
among the key features that distinguish this series.
Features
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Management
• Friendly port names: allows assignment of descriptive names to ports
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Performance
• Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to
143 million pps throughput
Resiliency and high availability
• Separate data and control paths: separates control from services and keeps service processing isolated;
increases security and performance
Layer 2 switching
• 16K MAC address table: provides access to many Layer 2 devices
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports
static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation
between subnets or when subnets are separated by a Layer 2 network
Main specifications:
Management features
Switch layer:
Switch type:
Quality of Service (QoS) support:
Multicast support:
Web-based management:
L3
Managed
Y
Y
Y
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 24
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports type:
4
SFP ports quantity:
RJ-45
Console port:
Networking
Networking standards:
Full duplex:
Flow control support:
Port mirroring:
Link aggregation:
Broadcast storm control:
DHCP client:
IGMP snooping:
Spanning tree protocol:
Routing entries:
10G support:
VLAN support:
Auto-sensing:
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Y
Y
Y
Y
Y
Y
Y
Y
32
N
Y
Y
Data transmission
Switching capacity:
Throughput:
Latency (1 Gbps):
48 Gbit/s
35.7 Mpps
3.2 µs
Security
Access Control List (ACL):
SSH/SSL support:
Y
Y
Design
Rack mounting:
Colour of product:
Form factor:
Y
Black
1U
Performance
Stackable:
Internal memory:
Memory type:
Flash memory:
Packet buffer memory:
Y
128 MB
SDRAM
16 MB
2 MB
Power
AC input voltage:
AC input frequency:
Power consumption (typical):
100-240 V
50/60 Hz
62 W
Power over Ethernet (PoE)
Power over Ethernet (PoE) support:
N
Operational conditions
Heat dissipation:
212 BTU/h
Weight & dimensions
Width:
440 mm
Depth:
Height:
Weight:
300 mm
43.6 mm
4500 g
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to
accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or
as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and
manufacturer names are used only for the purpose of identification.