LCD TV chassis FL10.1 SERVICE MANUAL Contents 22” LC220SS1 SYLVANIA 22” 22MF330B/F7 MAGNAVOX 22” LC220EM1 EMERSON (Serial No. : DS1A**********) 22” LC220EM1 EMERSON (Serial No. : DS2A**********) 22” LC220EM1 EMERSON (Serial No. : TH1A**********) 22” LC220EM1 EMERSON (Serial No. : TH2A**********) 22” LC220SL1 SYLVANIA (Serial No. : DS1A**********) 22” LC220SL1 SYLVANIA (Serial No. : DS2A**********) 22” LC220SL1 SYLVANIA (Serial No. : TH1A**********) 22” LC220SL1 SYLVANIA (Serial No. : TH2A**********) © 2010 Funai Electric Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes. with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. A0171UH/70UH/75UH/7BUH/76UT/7GUT/73UH/7AUH/79UT/7FUT 100730 IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all Funai Equipment. The service procedures recommended by Funai and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended. It is important to note that this service manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It also is important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. Funai could not possibly know, evaluate and advice the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, Funai has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by Funai must first use all precautions thoroughly so that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected. The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a tiny spec of color. This is not to be considered a defect in the LCD screen. TABLE OF CONTENTS Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Standard Notes for Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Cabinet Disassembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Electrical Adjustment Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 How to Initialize the LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Firmware Renewal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Schematic Diagrams / CBA and Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1 Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 Exploded Views. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1 SPECIFICATIONS < TUNER / NTSC > ANT. Input ---------------------- 75 Ω Unbal., F type Description Condition Unit Nominal Limit --- MHz ±2.3 ±2.1 TV.ch.4 CA.ch.31 CA.ch.87 dBµ dBµ dBµ 18 18 18 20 20 23 Condition Unit Nominal Limit --- kHz --- ±100 ch.4 ch.10 ch.41 dBm dBm dBm ------- -76/0 -76/0 -76/+4 Description Condition Unit Nominal Limit 1. Native Pixel Resolution Horizontal Vertical pixels pixels 1366 768 ----- --- cd/m2 280 --- Horizontal Vertical ° ° -85 to 85 -80 to 80 ----- Condition Unit Nominal Limit Horizontal Vertical % % 5 5 5±5 5±5 --x y °K 12000 0.272 0.278 --±3% ±3% Horizontal Vertical line line 400 350 ----- 1. AFT Pull-In Range 2. Synchronizing Sens. < TUNER / ATSC > Description 1. Received Freq. Range (-28dBm) 2. ATSC Dynamic Range (min / max) < LCD PANEL > 2. Brightness (w / filter) 3. Viewing Angle < VIDEO > Description 1. Over Scan 2. Color Temperature 3. Resolution (composite video) < AUDIO > All items are measured across 8 Ω load at speaker output terminal with L.P.F. Description 1. Audio Output 10% Distortion (ATSC 0 dBfs) 2. Audio Distortion (NTSC) 3. Audio Freq. Response (NTSC) Condition Unit Nominal Limit Lch/Rch W 3.0/3.0 2.6/2.6 500mW: Lch/Rch % 0.5/0.5 2.0/2.0 -6dB: Lch -6dB: Rch Hz Hz 70 to 10 k 70 to 10 k ----- 1-1 FL10.1SP IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced. Safety Precautions for LCD TV Circuit d. Leakage Current Hot Check - With the instrument completely reassembled, plug the AC line cord directly into a 120 V AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI) C101.1 Leakage Current for Appliances and Underwriters Laboratories (UL) 1410, (50.7). With the instrument AC switch first in the on position and then in the off position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle brackets, metal cabinet, screw heads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5 milli-ampere. Reverse the instrument power cord plug in the outlet and repeat the test. 1. Before returning an instrument to the customer, always make a safety check of the entire instrument, including, but not limited to, the following items: a. Be sure that no built-in protective devices are defective and have been defeated during servicing. (1) Protective shields are provided on this chassis to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (2) When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including but not limited to, nonmetallic control knobs, insulating fishpapers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument or permit it to be operated without all protective devices correctly installed and functioning. Servicers who defeat safety features or fail to perform safety checks may be liable for any resulting damage. READING SHOULD NOT BE ABOVE 0.5 mA DEVICE BEING TESTED b. Be sure that there are no cabinet openings through which an adult or child might be able to insert their fingers and contact a hazardous voltage. Such openings include, but are not limited to, (1) spacing between the Liquid Crystal Panel and the cabinet mask, (2) excessively wide cabinet ventilation slots, and (3) an improperly fitted and/or incorrectly secured cabinet back cover. LEAKAGE CURRENT TESTER _ + TEST ALL EXPOSED METAL SURFACES ALSO TEST WITH PLUG REVERSED USING AC ADAPTER PLUG AS REQUIRED c. Antenna Cold Check - With the instrument AC plug removed from any AC source, connect an electrical jumper across the two AC plug prongs. Place the instrument AC switch in the on position. Connect one lead of an ohmmeter to the AC plug prongs tied together and touch the other ohmmeter lead in turn to each tuner antenna input exposed terminal screw and, if applicable, to the coaxial connector. If the measured resistance is less than 1.0 megohm or greater than 5.2 megohm, an abnormality exists that must be corrected before the instrument is returned to the customer. Repeat this test with the instrument AC switch in the off position. EARTH GROUND ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED HEREIN INDICATE A POTENTIAL SHOCK HAZARD THAT MUST BE ELIMINATED BEFORE RETURNING THE INSTRUMENT TO THE CUSTOMER OR BEFORE CONNECTING THE ANTENNA OR ACCESSORIES. 2. Read and comply with all caution and safetyrelated notes on or inside the receiver cabinet, on the receiver chassis, or on the Liquid Crystal Panel. 2-1 LTVN_ISP 7. Product Safety Notice - Some electrical and mechanical parts have special safety-related characteristics which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by a # on schematics and in parts lists. Use of a substitute replacement that does not have the same safety characteristics as the recommended replacement part might create shock, fire, and/or other hazards. The product's safety is under review continuously and new instructions are issued whenever appropriate. Prior to shipment from the factory, our products are strictly inspected to confirm they comply with the recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced. 3. Design Alteration Warning - Do not alter or add to the mechanical or electrical design of this TV receiver. Design alterations and additions, including, but not limited to circuit modifications and the addition of items such as auxiliary audio and/or video output connections, might alter the safety characteristics of this receiver and create a hazard to the user. Any design alterations or additions will void the manufacturer's warranty and may make you, the servicer, responsible for personal injury or property damage resulting therefrom. 4. Hot Chassis Warning a. Some TV receiver chassis are electrically connected directly to one conductor of the AC power cord and maybe safety-serviced without an isolation transformer only if the AC power plug is inserted so that the chassis is connected to the ground side of the AC power source. To confirm that the AC power plug is inserted correctly, with an AC voltmeter, measure between the chassis and a known earth ground. If a voltage reading in excess of 1.0 V is obtained, remove and reinsert the AC power plug in the opposite polarity and again measure the voltage potential between the chassis and a known earth ground. b. Some TV receiver chassis normally have 85V AC(RMS) between chassis and earth ground regardless of the AC plug polarity. This chassis can be safety-serviced only with an isolation transformer inserted in the power line between the receiver and the AC power source, for both personnel and test equipment protection. c. Some TV receiver chassis have a secondary ground system in addition to the main chassis ground. This secondary ground system is not isolated from the AC power line. The two ground systems are electrically separated by insulation material that must not be defeated or altered. 5. Observe original lead dress. Take extra care to assure correct lead dress in the following areas: a. near sharp edges, b. near thermally hot parts-be sure that leads and components do not touch thermally hot parts, c. the AC supply, d. high voltage, and, e. antenna wiring. Always inspect in all areas for pinched, out of place, or frayed wiring. Check AC power cord for damage. 6. Components, parts, and/or wiring that appear to have overheated or are otherwise damaged should be replaced with components, parts, or wiring that meet original specifications. Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard. 2-2 LTVN_ISP Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements. Examples: RF converters, RF cables, noise blocking capacitors, and noise blocking filters, etc. C. Use specified internal wiring. Note especially: 1) Wires covered with PVC tubing 2) Double insulated wires 3) High voltage leads D. Use specified insulating materials for hazardous live parts. Note especially: 1) Insulation Tape 2) PVC tubing 3) Spacers 4) Insulators for transistors. E. When replacing AC primary side components (transformers, power cord, etc.), wrap ends of wires securely about the terminals before soldering. F. Observe that the wires do not contact heat producing parts (heat sinks, oxide metal film resistors, fusible resistors, etc.) G. Check that replaced wires do not contact sharp edged or pointed parts. H. When a power cord has been replaced, check that 5~6 kg of force in any direction will not loosen it. I. Also check areas surrounding repaired locations. J. Use care that foreign objects (screws, solder droplets, etc.) do not remain inside the set. K. When connecting or disconnecting the internal connectors, first, disconnect the AC plug from the AC supply outlet. L. When installing parts or assembling the cabinet parts, be sure to use the proper screws and tighten certainly. 2-3 LTVN_ISP Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards. 1. Clearance Distance When replacing primary circuit components, confirm specified clearance distance (d) and (d') between soldered terminals, and between terminals and surrounding metallic parts. (See Fig. 1) Chassis or Secondary Conductor Primary Circuit Table 1: Ratings for selected area AC Line Voltage Region Clearance Distance (d), (d’) 110 to 130 V U.S.A. or Canada ≥ 3.2 mm (0.126 inches) d' d Note: This table is unofficial and for reference only. Be sure to confirm the precise values. Fig. 1 2. Leakage Current Test Confirm the specified (or lower) leakage current between B (earth ground, power cord plug prongs) and externally exposed accessible parts (RF terminals, antenna terminals, video and audio input and output terminals, microphone jacks, earphone jacks, etc.) is lower than or equal to the specified value in the table below. Exposed Accessible Part Z AC Voltmeter (High Impedance) Measuring Method: (Power ON) Insert load Z between B (earth ground, power cord plug prongs) and exposed accessible parts. Use an AC voltmeter to measure across both terminals of load Z. See Fig. 2 and following table. B Earth Ground Power Cord Plug Prongs Fig. 2 Table 2: Leakage current ratings for selected areas AC Line Voltage Region Load Z Leakage Current (i) Earth Ground (B) to: 110 to 130 V U.S.A. or Canada 0.15 µF CAP. & 1.5 kΩ RES. Connected in parallel i ≤ 0.5 mA rms Exposed accessible parts Note: This table is unofficial and for reference only. Be sure to confirm the precise values. 2-4 LTVN_ISP STANDARD NOTES FOR SERVICING Circuit Board Indications How to Remove / Install Flat Pack-IC 1. The output pin of the 3 pin Regulator ICs is indicated as shown. 1. Removal With Hot-Air Flat Pack-IC Desoldering Machine: Top View Out 1. Prepare the hot-air flat pack-IC desoldering machine, then apply hot air to the Flat Pack-IC (about 5 to 6 seconds). (Fig. S-1-1) Bottom View In Input 2. For other ICs, pin 1 and every fifth pin are indicated as shown. 5 Pin 1 10 3. The 1st pin of every male connector is indicated as shown. Fig. S-1-1 2. Remove the flat pack-IC with tweezers while applying the hot air. Pin 1 3. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6) Pb (Lead) Free Solder 4. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6) Pb free mark will be found on PCBs which use Pb free solder. (Refer to figure.) For PCBs with Pb free mark, be sure to use Pb free solder. For PCBs without Pb free mark, use standard solder. CAUTION: 1. The Flat Pack-IC shape may differ by models. Use an appropriate hot-air flat pack-IC desoldering machine, whose shape matches that of the Flat Pack-IC. 2. Do not supply hot air to the chip parts around the flat pack-IC for over 6 seconds because damage to the chip parts may occur. Put masking tape around the flat pack-IC to protect other parts from damage. (Fig. S-1-2) Pb free mark 3-1 TVN_SN With Soldering Iron: 3. The flat pack-IC on the CBA is affixed with glue, so be careful not to break or damage the foil of each pin or the solder lands under the IC when removing it. CBA 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3) Hot-air Flat Pack-IC Desoldering Machine Flat Pack-IC Desoldering Braid Soldering Iron Masking Tape Tweezers Flat Pack-IC Fig. S-1-3 2. Lift each lead of the flat pack-IC upward one by one, using a sharp pin or wire to which solder will not adhere (iron wire). When heating the pins, use a fine tip soldering iron or a hot air desoldering machine. (Fig. S-1-4) Fig. S-1-2 Sharp Pin Fine Tip Soldering Iron Fig. S-1-4 3. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6) 4. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6) 3-2 TVN_SN With Iron Wire: 2. Installation 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3) 1. Using desoldering braid, remove the solder from the foil of each pin of the flat pack-IC on the CBA so you can install a replacement flat pack-IC more easily. 2. Affix the wire to a workbench or solid mounting point, as shown in Fig. S-1-5. 2. The “ I ” mark on the flat pack-IC indicates pin 1. (See Fig. S-1-7.) Be sure this mark matches the pin 1 on the PCB when positioning for installation. Then presolder the four corners of the flat pack-IC. (See Fig. S-1-8.) 3. While heating the pins using a fine tip soldering iron or hot air blower, pull up the wire as the solder melts so as to lift the IC leads from the CBA contact pads as shown in Fig. S-1-5. 3. Solder all pins of the flat pack-IC. Be sure that none of the pins have solder bridges. 4. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6) Example : 5. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6) Note: When using a soldering iron, care must be taken to ensure that the flat pack-IC is not being held by glue. When the flat pack-IC is removed from the CBA, handle it gently because it may be damaged if force is applied. Pin 1 of the Flat Pack-IC is indicated by a " " mark. Hot Air Blower or Fig. S-1-7 Presolder Iron Wire Soldering Iron To Solid Mounting Point Fig. S-1-5 Flat Pack-IC CBA CBA Fig. S-1-8 Fine Tip Soldering Iron Flat Pack-IC Tweezers Fig. S-1-6 3-3 TVN_SN Instructions for Handling Semiconductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body. 2. Ground for Workbench Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface, where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through the body grounding band, be careful to avoid contacting semi-conductors with your clothing. <Incorrect> CBA <Correct> Grounding Band 1MΩ CBA 1MΩ Conductive Sheet or Copper Plate 3-4 TVN_SN CABINET DISASSEMBLY INSTRUCTIONS [LC220SS1, 22MF330B/F7, LC220EM1 (Serial No. : DS1A, DS2A, TH1A), LC220SL1 (Serial No. : DS1A, DS2A, TH1A)] 1. Disassembly Flowchart Removal Step/ Loc. No. This flowchart indicates the disassembly steps for the cabinet parts, and the CBA in order to gain access to item(s) to be serviced. When reassembling, follow the steps in reverse order. Bend, route and dress the cables as they were. [14] Junction-A CBA [1] Stand Assembly [12] Junction-C CBA [2] Rear Cabinet [13] Junction-B CBA [3] Jack Holder (D) [5] Jack Holder (A) [4] Digital Main CBA Unit [6] Jack CBA [10] Speaker Holder [7] Main CBA [11] Speaker [8] Stand Holder [15] Function CBA [16] Front Cabinet 2. Disassembly Method Removal Part Fig. No. Remove/*Unhook/ Unlock/Release/ Unplug/Unclamp/ Desolder Note Note Stand Holder D2 2(S-13), (S-14) --- [9] LCD Module Assembly D2 --------------- --- [10] Speaker Holder D2 4(S-15) --- D2 --------------- --- [12] Junction-C CBA D2 Desolder D3 --- [13] Junction-B CBA D2 Desolder D3 --- [14] Junction-A CBA D2 Desolder D3 --- [15] Function CBA D2 2(S-16) D3 --- [16] Front Cabinet D2 --------------- --- ↓ (1) ↓ (2) ↓ (3) ↓ (5) ↓ (4) Note: ----- (2) Parts to be removed or installed. Stand Assembly D1 3(S-1) [2] Rear Cabinet D1 [3] Jack Holder(D) D2 (S-6) [4] 4(S-7), (S-8), 4(S-9), Digital Main D2 2(H-1), *CN301, CBA Unit D3 *CN302, *CN3902, Shield Box --- [5] Jack Holder(A) D2 (S-10) --- [6] Jack CBA D2 4(S-11), CN702, D3 *CN861A --- Main CBA 10(S-12), *CN102, D2 *CN201, *CN801A, D3 *CN1550, *CN1650, *CN1750 --- [7] Remove/*Unhook/ Unlock/Release/ Unplug/Unclamp/ Desolder (1) Order of steps in procedure. When reassembling, follow the steps in reverse order. These numbers are also used as the Identification (location) No. of parts in figures. [1] 9(S-2), 2(S-3), (S-4) 3(S-5) Fig. No. [8] [11] Speaker [9] LCD Module Assembly Step/ Loc. No. Part (3) Fig. No. showing procedure of part location --- (4) Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered. P = Spring, L = Locking Tab, S = Screw, H = Hex Screw, CN = Connector * = Unhook, Unlock, Release, Unplug, or Desolder e.g. 2(S-2) = two Screws (S-2), 2(L-2) = two Locking Tabs (L-2) (5) Refer to the following "Reference Notes in the Table." 4-1 FL10.1DC (S-2) (S-3) (S-2) (S-4) (S-2) (S-2) [2] Rear Cabinet (S-5) (S-2) (S-2) [1] Stand Assembly (S-1) Fig. D1 4-2 FL10.1DC [4] Digital Main CBA Unit [16] Front Cabinet [3] Jack Holder(D) (S-9) (S-7) (S-6) (S-7) [14] Junction-A CBA [15] Function CBA (S-8) (H-1) Shield Box [12] Junction-C CBA (S-7) [6] Jack CBA [5] Jack Holder(A) (S-16) (S-10) (S-15) [11] Speaker (S-11) (S-15) [13] Junction-B CBA (S-13) (S-11) [10] Speaker Holder (S-12) (S-13) (S-14) (S-12) [8] Stand Holder [9] LCD Module Assembly (S-12) [7] Main CBA (S-12) (S-12) Fig. D2 4-3 FL10.1DC TV Cable Wiring Diagram To LCD Module Assembly To LCD Module Assembly Digital Main CBA Unit Main CBA CN1550 CN201 CN301 CN3902 CN3701 CN302 CN3702 CN1650 CN1750 CN702 Jack CBA CN701 CN801A CN102 AC CORD CN861A Junction-B CBA CN862B Junction-A CBA CN101 CN101A CL862 CN861B Junction-C CBA CL861 To Speaker Function CBA To Speaker CN101B Fig. D3 4-4 FL10.1DC CABINET DISASSEMBLY INSTRUCTIONS [LC220EM1 (Serial No. : TH2A), LC220SL1 (Serial No. : TH2A)] 1. Disassembly Flowchart Removal This flowchart indicates the disassembly steps for the cabinet parts, and the CBA in order to gain access to item(s) to be serviced. When reassembling, follow the steps in reverse order. Bend, route and dress the cables as they were. Step/ Loc. No. [1] Stand Assembly [7] [2] Rear Cabinet [3] Jack Holder (D) [5] Jack Holder (A) [4] Digital Main CBA Unit [6] Jack CBA [10] Speaker Holder [7] Main CBA [11] Speaker [8] Stand Holder Part [9] LCD Module Assembly [13] Front Cabinet Remove/*Unhook/ Unlock/Release/ Unplug/Unclamp/ Desolder Note Main CBA 10(S-12), *CN102, D2 *CN201, *CN872, D3 *CN1550, *CN1650, *CN1750 --- [8] Stand Holder D2 2(S-13), (S-14) --- [9] LCD Module Assembly D2 --------------- --- [10] Speaker Holder D2 4(S-15) --- D2 --------------- --- [11] Speaker [12] Function CBA Fig. No. [12] Function CBA D2 2(S-16) D3 --- [13] Front Cabinet D2 --------------- --- ↓ (1) ↓ (2) ↓ (3) ↓ (5) ↓ (4) Note: 2. Disassembly Method (1) Order of steps in procedure. When reassembling, follow the steps in reverse order. These numbers are also used as the Identification (location) No. of parts in figures. Removal Step/ Loc. No. Part Fig. No. Remove/*Unhook/ Unlock/Release/ Unplug/Unclamp/ Desolder [1] Stand Assembly D1 3(S-1) [2] Rear Cabinet D1 [3] Jack Holder(D) D2 (S-6) [4] 4(S-7), (S-8), 4(S-9), Digital Main D2 2(H-1), *CN301, CBA Unit D3 *CN302, *CN3902, Shield Box --- [5] Jack Holder(A) D2 (S-10) --- [6] Jack CBA D2 4(S-11), CN702, D3 *CN871 --- 9(S-2), 2(S-3), (S-4) 3(S-5) (2) Parts to be removed or installed. Note (3) Fig. No. showing procedure of part location (4) Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered. P = Spring, L = Locking Tab, S = Screw, H = Hex Screw, CN = Connector * = Unhook, Unlock, Release, Unplug, or Desolder e.g. 2(S-2) = two Screws (S-2), 2(L-2) = two Locking Tabs (L-2) ------- (5) Refer to the following "Reference Notes in the Table." 4-5 A017GDC (S-2) (S-3) (S-2) (S-4) (S-2) (S-2) [2] Rear Cabinet (S-5) (S-2) (S-2) [1] Stand Assembly (S-1) Fig. D1 4-6 A017GDC [4] Digital Main CBA Unit [13] Front Cabinet [3] Jack Holder(D) (S-9) (S-7) (S-6) (S-7) (S-8) (H-1) [12] Function CBA Shield Box (S-7) [6] Jack CBA [5] Jack Holder(A) (S-16) (S-10) (S-15) [11] Speaker (S-11) (S-15) (S-13) (S-11) [10] Speaker Holder (S-12) (S-13) (S-14) (S-12) [8] Stand Holder [9] LCD Module Assembly (S-12) [7] Main CBA (S-12) (S-12) Fig. D2 4-7 A017GDC TV Cable Wiring Diagram To LCD Module Assembly To LCD Module Assembly Digital Main CBA Unit Main CBA CN1550 CN201 CN301 CN3902 CN3701 CN302 CN3702 CN1650 CN1750 CN702 Jack CBA CN701 CN102 CN872 AC CORD CN871 To Speaker To Speaker Function CBA CN101B Fig. D3 4-8 A017GDC ELECTRICAL ADJUSTMENT INSTRUCTIONS How to set up the service mode: General Note: “CBA” is abbreviation for “Circuit Board Assembly.” Service mode: Note: Electrical adjustments are required after replacing circuit components and certain mechanical parts. It is important to perform these adjustments only after all repairs and replacements have been completed. Also, do not attempt these adjustments unless the proper equipment is available. 1. Turn the power on. 2. Press [MENU] button to display Setup menu. 3. Select “Features”. 4. Select “Current Software Info”. 5. Press [0], [4], [2], [5], [7], [4] and [INFO] buttons on the remote control unit in this order. The following screen appears. Test Equipment Required 1. NTSC Pattern Generator (Color Bar W/White Window, Red Color, Dot Pattern, Gray Scale, Monoscope, Multi-Burst) "*" differs depending on the models. Code : ******-***-*-***-**** Pic code : **-*******-***-*-*** 2. Remote control unit MIPS : Push 0 key 3. Color Analyzer Press "POWER" key to exit. Tuner : ****-*****-**** safety_Non Safety : HDMI EDID : OK 5-1 FL10.2EA 1. Purity Check Mode 2. VCOM Adjustment This mode cycles through full-screen displays of red, green, blue, and white to check for non-active pixels. Test Point Adj. Point 1. Enter the Service mode. Screen 2. Each time pressing [7] button on the remote control unit, the display changes as follows. [CH X/Y ] buttons M. EQ. Spec. Color analyzer See below Purity Check Mode Figure White mode To avoid interference from ambinent light, this adjustment should be performed in a dark room. [7] button Perpendicularity [7] button Black mode L = 3 cm Color Analyzer [7] button Red mode 1. Operate the unit for more than 60 minutes. 2. Set the color analyzer and bring the optical receptor to the center on the LCD-Panel surface after zero point calibration as shown above. Note: The optical receptor must be set perpendicularly to the LCD Panel surface. [7] button Green mode 3. Enter the Service mode. 4. Press [3] button on the remote control unit. 5. Press [CH X/Y] buttons on the remote control unit so that the color analyzer value becomes minimum. [7] button 6. To cancel or to exit from the VCOM Adjustment, press [PREV CH] button. Blue mode [7] button White 20% mode Note: When entering this mode, the default setting is White mode. 3. To cancel or to exit from the Purity Check Mode, press [PREV CH] button. 5-2 FL10.2EA The White Balance Adjustment should be performed when replacing the LCD Panel or Digital Main CBA. Purpose: To mix red, green and blue beams correctly for pure white. 5. [CUTOFF] Press [1] button to select “COR” for Red Cutoff adjustment. Press [3] button to select “COB” for Blue Cutoff adjustment. [DRIVE] Press [4] button to select “DR” for Red Drive adjustment. Press [6] button to select “DB” for Blue Drive adjustment. Symptom of Misadjustment: White becomes bluish or reddish. 6. In each color mode, press [CH X/Y] buttons to adjust the values of color. Test Point Adj. Point 7. Adjust Cutoff and Drive so that the color temperature becomes 12000°K (x= 0.272 / y= 0.278 ±0.005). 3. White Balance Adjustment Screen [VOL Y] button Mode Input [VIDEO1] C/D White Raster (APL 70%) or (APL 40%) M. EQ. Spec. Pattern Generator, Color analyzer x= 0.272 ± 0.005 y= 0.278 ± 0.005 8. To cancel or to exit from the White Balance Adjustment, press [PREV CH] button. Figure To avoid interference from ambinent light, this adjustment should be performed in a dark room. Perpendicularity L = 3 cm INPUT: WHITE 70%, 40% Color Analyzer 1. Operate the unit for more than 60 minutes. 2. Input the White Raster(70%=70IRE, 40%=40IRE). INPUT SIGNAL 0IRE 0IRE Low Light Hight Light 100IRE 100IRE 40%=40IRE 70%=70IRE 3. Set the color analyzer to the CHROMA mode and bring the optical receptor to the center on the LCD-Panel surface after zero point calibration as shown above. Note: The optical receptor must be set perpendicularly to the LCD Panel surface. 4. Enter the Service mode. Press [VOL Y] button on the remote control unit and select “C/D” mode. 5-3 FL10.2EA HOW TO INITIALIZE THE LCD TV The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure. 1. Turn the power on. 2. Enter the service mode. - To cancel the service mode, press [ ] button on the remote control unit. 3. Press [INFO] button on the remote control unit to initialize the LCD television. 4. "INITIALIZED" will appear in the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is completed. 6-1 FL10.2INT FIRMWARE RENEWAL MODE Equipment Required 4. The update will start and the following will appear on the screen. a. USB storage device b. Remote Control Unit "*" differs depending on the models. Software Upgrade Software upgrade in progress. Please wait. Do not remove the USB storage device or turn the TV off while upgrade is in progress. Firmware Update Procedure Note: There are two states (the User Upgrade and the Factory Upgrade) in firmware update. User Upgrade Factory upgrade Current Version: *******-***-*-***-**** New Version: *******-***-*-***-**** Upgrade the firmware only. The setting values are not initialized. *1 Downloading... 0% Upgrade the firmware and initialize the setting values. Note: If the above screen isn’t displayed, repeat from step 1. The identification of User Upgrade and Factory Upgrade are done by the filename. The appearance shown in *1 is described as follows. Appearance 1. Turn the power off and unplug the AC Cord. 2. Insert the USB storage device to the USB port as shown below. USB port State Downloading... Downloading the firmware from the USB storage device. Writing... Writing the downloaded firmware in flash memory. Checking... Checking the new firmware. 5. When the firmware update is completed, the following will appear on the screen. USB storage device Software Upgrade The software upgrade is completed. Remove USB storage device, turn TV off then on again. Rear Cabinet Remove the USB storage device from the USB port. Turn the power off and turn the power on again. Note: 3. Plug the AC cord in the wall outlet and turn the power on. When the Factory Upgrade is used, after restarting TV, shift to initial screen menu in service mode. "INITIALIZED" will appear on the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is completed. 7-1 FL10.1FW TROUBLESHOOTING [ Power Supply Section ] FLOW CHART NO.1 The power cannot be turned on. No Is the fuse (F601) normal? See FLOW CHART No.2 <The fuse blows out.> Yes Is normal state restored when once unplugged power cord is plugged again several seconds? No Yes Is the INV+31V line voltage normal? Check if there is any leak or short-circuiting on the primary circuit component, and service it if defective. (D601, D602, D603, D604, Q601, Q602, T601) No Yes Check each rectifying circuit of the secondary circuit and service it if defective. FLOW CHART NO.2 The fuse blows out. Check the presence that the rectifying diode or circuit is shorted in each rectifying circuit of secondary side, and service it if defective. Check the presence that the primary component is leaking or shorted and service it if defective. After servicing, replace the fuse. FLOW CHART NO.3 When the output voltage fluctuates. Does the photocoupler circuit on the secondary side operate normally? No Check IC601, D633, Q631 and their periphery circuit, and service it if defective. Yes Check IC601, D608, D610 and their periphery, circuit and service it if defective. FLOW CHART NO.4 When buzz sound can be heard in the vicinity of power circuit. Check if there is any short-circuit on the rectifying diode and the circuit in each rectifying circuit of the secondary side, and service it if defective. (IC631, Q201, Q205, Q206, Q634, Q635, Q636, Q637, Q640, Q641, Q643, D631, D632, D636, D638, D639, D641, D643) FLOW CHART NO.5 INV+31V is not output. Is approximately +31V voltage supplied to the cathode of D632? No Check C632, D632, D633 and their periphery circuit, and service it if defective. Yes Check if there is any leak or short-circuit on the loaded circuit, and service it if defective. 8-1 FL10.1TR FLOW CHART NO.6 PANEL+24.5V is not output. Is approximately +30V voltage supplied to the collector of Q205? No See FLOW CHART No.5 Yes Check Q202, Q203, D203, P-ON-H1 line and their periphery circuit, and service it if defective. FLOW CHART NO.7 PANEL+13V is not output. No Is approximately +15V voltage supplied to the collector of Q201? Check C631, D631, D668 and their periphery circuit, and service it if defective. Yes Is approximately +13V voltage supplied to the base of Q201? No Check Q202, Q203, D201, D202, D210 and their periphery circuit, and service it if defective. Yes Replace Q201. FLOW CHART NO.8 P-ON+7V is not output. Is approximately +7V voltage supplied to the cathode of D641? No Check C641, D641 and their periphery circuit, and service it if defective. Yes Check if there is any leak or short-circuit on the loaded circuit, and service it if defective. FLOW CHART NO.9 P-ON+5V is not output. (PANEL+13V is outputted normally.) Is approximately +6.8V voltage supplied to the collector of Q635? No See FLOW CHART No.8 Yes Is approximately +6V voltage supplied to the base of Q635 and the base of Q636? No Check D659 and their periphery circuit, and service it if defective. Yes Replace Q635 and Q636. 8-2 FL10.1TR FLOW CHART NO.10 TUNER+5V is not output. (PANEL+13V is outputted normally.) Is approximately +6.7V voltage supplied to the collector of Q637? No See FLOW CHART No.8 Yes Is approximately +6V voltage supplied to the base of Q637? No Check D659 and their periphery circuit, and service it if defective. Yes Replace Q637. FLOW CHART NO.11 P-ON+3V is not output. Is approximately +3V voltage supplied to the cathode of D638? No Check C638, D638 and their periphery circuit, and service it if defective. Yes Check if there is any leak or short-circuit on the loaded circuit, and service it if defective. FLOW CHART NO.12 P-ON+3.3V(PANEL+3.3V) is not output. Is approximately +5V voltage supplied to the cathode of D639? No Check C639, D639 and their periphery circuit, and service it if defective. Yes Is the "H" signal (approximately +3.5V) inputted to the base of Q640? No Check Q638, Q639, P-ON-H2 line and their periphery circuit, and service it if defective. Yes Replace Q640. FLOW CHART NO.13 P-ON+9V is not output. (PANEL+13V is outputted normally.) Is approximately +13V voltage supplied to the collector of Q641? No Check C643, D643 and their periphery circuit, and service it if defective. Yes Is approximately +10V voltage supplied to the base of Q641? No Check D666 and their periphery circuit, and service it if defective. Yes Replace Q641. 8-3 FL10.1TR FLOW CHART NO.14 AL+3.3V is not output. Is approximately +34V voltage supplied to the collector of Q634? No See FLOW CHART No.5 Yes Is approximately +5V voltage supplied to Pin(1) of IC631? No Check Q634, D650 and their periphery circuit, and service it if defective. Yes Replace IC631. FLOW CHART NO.15 LCD-7.1V is not output. No Is approximately -9V voltage supplied to the Anode of D636? Check C636, D636, D637 and their periphery circuit, and service it if defective. Yes Is approximately -8V voltage supplied to the base of Q206? No Check Q202, Q203, D204, P-ON-H1 line and their periphery circuit, and service it if defective. Yes Replace Q206. 8-4 FL10.1TR [ Video Signal Section ] FLOW CHART NO.1 The key operation is not functioning. Are the contact point and installation state of the key switches (SW104~SW109) normal? No Re-install the switches (SW104~SW109) correctly or replace the poor switch. Yes When pressing each switches (SW104~SW109) do the voltage of Pin(29) of CN302 increase? No Check the switches (SW104~SW109) and their periphery, and service it if defective. Yes Replace Digital Main CBA Unit. FLOW CHART NO.2 No operation is possible from the remote control unit. Operation is possible from the unit. Is 3.3V voltage supplied to Pin(2) terminal of the remote control receiver (RS101)? No Check AL+3.3V line and service it if defective. Yes No Is the "L" pulse sent out Pin(1) terminal of remote control receiver (RS101) when the infrared remote control is activated? Replace the remote control receiver(RS101) or the remote control unit. Yes Is the "L" pulse supplied to Pin(25) of CN301? No Yes Check the line between Pin(1) terminal of remote control receiver(RS101) and Pin(25) of CN301, and service it if defective. Replace Digital Main CBA Unit. FLOW CHART NO.3 Picture does not appear normally.(Video input) Are the video signal inputted to Pin(4) of CN302? No Yes Check the line between Pin(4) of CN302 and JK752, and service it if defective. Replace Digital Main CBA Unit or LCD Module Assembly. 8-5 FL10.1TR FLOW CHART NO.4 Picture does not appear normally.(Tuner input) Are the DIF signal inputted to Pin(26,28) of CN302? No Yes Check the line between Pin(26, 28) of CN302 and Pin(10, 11) of TU302, and service it if defective. Replace Digital Main CBA Unit or LCD Module Assembly. FLOW CHART NO.5 Picture does not appear normally.(S-Video input) Are the video signal outputted to Pin(6, 8) of CN302? No Pin(6): S-VIDEO-C Pin(8): S-VIDEO-Y Check the line between Pin(6, 8) of CN302 and JK751, and service it if defective. Yes Replace Digital Main CBA Unit or LCD Module Assembly. FLOW CHART NO.6 Picture does not appear normally.(Y/Pb/Pr input) Are the video signal inputted to Pin(15, 17, 19) of CN302? No Pin(15): VIDEO-Y Pin(17): VIDEO-Pb Pin(19): VIDEO-Pr Check the line between Pin(15, 17, 19) of CN302 and input terminals(JK731, JK732, JK733), and service it if defective. Yes Replace Digital Main CBA Unit or LCD Module Assembly. 8-6 FL10.1TR [ Audio Signal Section ] FLOW CHART NO.1 Audio is not outputted normally.(Audio input) Are the audio(L/R) signals inputted to Pin(2, 15) of IC771? No Check the line between Pin(2, 15) of IC771 and input terminal(JK753, JK754), and service it if defective. Yes No Are the audio(L/R) signals inputted to Pin(6, 8) of CN301? Yes Replace Digital Main CBA Unit. Check the line between Pin(6, 8) of CN301 and Pin(3, 5) of IC803, and service it if defective. Are the audio(L/R) signals inputted to Pin(3, 5) of IC803? Yes No Are the audio(L/R) signals outputted to Pin(1, 7) of IC803? Yes No Are the audio(L/R) signals inputted to Pin(1, 9) of IC801? Yes No Check the line between Pin(1, 7) of IC803 and Pin(1, 9) of IC801, and service it if defective. Are the audio(L/R) signals outputted to Pin(4, 6) of IC801? No Check IC801 and their periphery circuit, and service it if defective. Replace IC803 Yes Check SP861,SP862 and their periphery circuit, and service it if defective. FLOW CHART NO.2 Audio is not outputted normally.(Component Audio input) Are the audio(L/R) signals inputted to Pin(4, 11) of IC771? No Check the line between Pin(4, 11) of IC771 and input terminal(JK741, JK742), and service it if defective. Yes Are the audio(L/R) signals inputted to Pin(6, 8) of CN301? Yes No Replace Digital Main CBA Unit. Check the line between Pin(6, 8) of CN301 and Pin(3, 5) of IC803, and service it if defective. Are the audio(L/R) signals inputted to Pin(3, 5) of IC803? Yes No Are the audio(L/R) signals outputted to Pin(1, 7) of IC803? Yes No Are the audio(L/R) signals inputted to Pin(1, 9) of IC801? Yes No Check the line between Pin(1, 7) of IC803 and Pin(1, 9) of IC801, and service it if defective. Are the audio(L/R) signals outputted to Pin(4, 6) of IC801? No Check IC801 and their periphery circuit, and service it if defective. Replace IC803 Yes Check SP861,SP862 and their periphery circuit, and service it if defective. 8-7 FL10.1TR FLOW CHART NO.3 Audio is not outputted normally.(Tuner input) Are the DIF signals outputted to Pin(26, 28) of CN302? No Yes Are the audio(L/R) signals inputted to Pin(6, 8) of CN301? Yes No Check TU302 and their periphery circuit, and service it if defective. Replace Digital Main CBA Unit. Check the line between Pin(6, 8) of CN301 and Pin(3, 5) of IC803, and service it if defective. Are the audio(L/R) signals inputted to Pin(3, 5) of IC803? Yes No Are the audio(L/R) signals outputted to Pin(1, 7) of IC803? Yes No Are the audio(L/R) signals inputted to Pin(1, 9) of IC801? Yes No Check the line between Pin(1, 7) of IC803 and Pin(1, 9) of IC801, and service it if defective. Are the audio(L/R) signals outputted to Pin(4, 6) of IC801? No Check IC801 and their periphery circuit, and service it if defective. Replace IC803 Yes Check SP861,SP862 and their periphery circuit, and service it if defective. FLOW CHART NO.4 Audio is not outputted normally.(HDMI Audio input) Are the audio(L/R) signals inputted to Pin(5, 14) of IC771? No Check the line between Pin(5, 14) of IC771 and input terminal(JK721, JK722), and service it if defective. Yes Are the audio(L/R) signals inputted to Pin(6, 8) of CN301? Yes No Replace Digital Main CBA Unit. Check the line between Pin(6, 8) of CN301 and Pin(3, 5) of IC803, and service it if defective. Are the audio(L/R) signals inputted to Pin(3, 5) of IC803? Yes No Are the audio(L/R) signals outputted to Pin(1, 7) of IC803? Yes No Are the audio(L/R) signals inputted to Pin(1, 9) of IC801? Yes No Check the line between Pin(1, 7) of IC803 and Pin(1, 9) of IC801, and service it if defective. Are the audio(L/R) signals outputted to Pin(4, 6) of IC801? No Check IC801 and their periphery circuit, and service it if defective. Replace IC803 Yes Check SP861,SP862 and their periphery circuit, and service it if defective. 8-8 FL10.1TR FLOW CHART NO.5 Audio is not outputted normally.(PC Audio input) Are the audio(L/R) signals inputted to Pin(1, 12) of IC771? No Check the line between Pin(1, 12) of IC771 and input terminal(JK711), and service it if defective. Yes Are the audio(L/R) signals inputted to Pin(6, 8) of CN301? Yes No Replace Digital Main CBA Unit. Check the line between Pin(6, 8) of CN301 and Pin(3, 5) of IC803, and service it if defective. Are the audio(L/R) signals inputted to Pin(3, 5) of IC803? Yes No Are the audio(L/R) signals outputted to Pin(1, 7) of IC803? Yes No Are the audio(L/R) signals inputted to Pin(1, 9) of IC801? Yes No Check the line between Pin(1, 7) of IC803 and Pin(1, 9) of IC801, and service it if defective. Are the audio(L/R) signals outputted to Pin(4, 6) of IC801? No Check IC801 and their periphery circuit, and service it if defective. Replace IC803 Yes Check SP861,SP862 and their periphery circuit, and service it if defective. 8-9 FL10.1TR 9-1 SCK SI SO CS WP N2 CLKIN-32K N1 CLKOUT-32K X3102 32.768kHz OSC DIGITAL MAIN CBA UNIT U1 CLKIN-25M V1 CLKOUT-25M X3101 25MHz OSC SCK SIN SOUT CS WP K22 L19 L20 K21 F21 L2 L3 M2 M4 E19 C22 SCL1 K3 SDA1 K4 PROTECT1 PROTECT2 PROTECT3 VCOM-PWM BACKLIGHT-SW BACKLIGHT-ADJ G19 INPUT0 G20 INPUT1 P5 AUDIO-MUTE 6 5 2 1 3 INPUT0 INPUT1 AUDIO-MUTE IC3101 (MEMORY) TO AUDIO BLOCK DIAGRAM 22 SCL 21 SDA CN3702 CN302 22 21 CN301 11 11 PROTECT1 15 15 PROTECT2 5 5 PROTECT3 29 29 VCOM-PWM 26 BACKLIGHT-SW 26 28 BACKLIGHT-ADJ 28 CN3701 CN301 25 27 1 9 13 REMOTE LED1 P-ON-H2 P-ON-H1 LED-R CN3701 25 27 1 9 13 REMOTE LED1 P-ON-H2 P-ON-H1 LED-R T1 R2 U3 P2 P3 CN302 29 CN3702 29 KEY-IN1 KEY-IN1 L1 IC3301 (MAIN MICRO CONTROLLER) Q172 DRIVE IC201,Q207, Q208,Q209 REMOTE P-ON-H1 LED1 KEY-IN1 (TUNER UNIT) (TUNER UNIT) MAIN CBA 9 SCL 8 SDA * TU301 4 SCL 5 SDA * TU302 Either TU301 or TU302 is used for Main CBA. Q171 CN102 2 5 4 6 CN101A 2 5 4 6 PROTECT3 BACKLIGHT-SW BACKLIGHT-ADJ VCOM P-ON-H2 P-ON-H1 PROTECT1 PROTECT2 CN101 2 5 4 6 JUNCTION -A CBA TO INVERTER BLOCK DIAGRAM KEY SWITCH D104 POWER AL+3.3V D103 STANDBY FUNCTION CBA CN101B 2 5 4 6 TO POWER SUPPLY BLOCK DIAGRAM REMOTE P-ON-H1 LED1 KEY-IN1 REMOTE SENSOR RS101 System Control Block Diagram [LC220SS1, 22MF330B/F7, LC220EM1(Serial No.:DS1A,DS2A,TH1A), LC220SL1(Serial No.:DS1A,DS2A,TH1A)] BLOCK DIAGRAMS FL10.1BLS 9-2 SCK SI SO CS WP N2 CLKIN-32K N1 CLKOUT-32K X3102 32.768kHz OSC DIGITAL MAIN CBA UNIT U1 CLKIN-25M V1 CLKOUT-25M X3101 25MHz OSC SCK SIN SOUT CS WP K22 L19 L20 K21 F21 L2 L3 M2 M4 E19 C22 SCL1 K3 SDA1 K4 PROTECT1 PROTECT2 PROTECT3 VCOM-PWM BACKLIGHT-SW BACKLIGHT-ADJ G19 INPUT0 G20 INPUT1 P5 AUDIO-MUTE 6 5 2 1 3 INPUT0 INPUT1 AUDIO-MUTE IC3101 (MEMORY) TO AUDIO BLOCK DIAGRAM 22 SCL 21 SDA CN3702 CN302 22 21 CN301 11 11 PROTECT1 15 PROTECT2 15 5 5 PROTECT3 29 29 VCOM-PWM 26 BACKLIGHT-SW 26 28 BACKLIGHT-ADJ 28 CN3701 CN301 25 27 1 9 13 REMOTE LED1 P-ON-H2 P-ON-H1 LED-R CN3701 25 27 1 9 13 REMOTE LED1 P-ON-H2 P-ON-H1 LED-R T1 R2 U3 P2 P3 CN302 29 CN3702 29 KEY-IN1 KEY-IN1 L1 IC3301 (MAIN MICRO CONTROLLER) DRIVE IC201,Q207, Q208,Q209 REMOTE P-ON-H1 LED1 KEY-IN1 (TUNER UNIT) (TUNER UNIT) MAIN CBA 9 SCL 8 SDA * TU301 4 SCL 5 SDA * TU302 Either TU301 or TU302 is used for Main CBA. Q171 Q172 CN102 2 5 4 6 PROTECT3 BACKLIGHT-SW BACKLIGHT-ADJ TO INVERTER BLOCK DIAGRAM TO POWER SUPPLY BLOCK DIAGRAM FUNCTION CBA KEY SWITCH D104 POWER AL+3.3V D103 STANDBY VCOM P-ON-H2 P-ON-H1 PROTECT1 PROTECT2 CN101B 2 5 4 6 REMOTE SENSOR RS101 System Control Block Diagram [LC220EM1(Serial No.:TH2A), LC220SL1(Serial No.:TH2A)] FL10.1BLS_2 C 9-3 JACK CBA Y CN701 27 28 26 19 20 18 16 DIF-OUT1 12 DIF-OUT2 13 IF-AGC 14 (TUNER UNIT) * TU301 DIF-OUT1 11 DIF-OUT2 10 IF-AGC 9 (TUNER UNIT) * TU302 CN702 VIDEO-IN 27 S-VIDEO-C-IN 28 S-VIDEO-Y-IN 26 S-VIDEO-SW-IN 19 COM-VIDEO-Y-IN 20 COM-VIDEO-Pb-IN 18 COM-VIDEO-Pr-IN 16 MAIN CBA Either TU301 or TU302 is used for Main CBA. JK731 COMPONENT -Y-IN JK732 COMPONENT -Pb-IN JK733 COMPONENT -Pr-IN JK751 S-VIDEO -IN JK752 VIDEO-IN WF4 WF2 WF5 WF3 WF6 WF1 JK3703 PC-RGB IN CN3702 4 6 8 5 15 17 19 CN3702 26 28 24 12 15 14 13 3 2 1 VIDEO-IN S-VIDEO-C-IN S-VIDEO-Y-IN S-VIDEO-SW COM-VIDEO-Y-IN COM-VIDEO-Pb-IN COM-VIDEO-Pr-IN CN302 26 DIF-OUT1 28 DIF-OUT2 24 IF-AGC CN302 4 6 8 5 15 17 19 DIF-OUT1 DIF-OUT2 IF-AGC VGA-SDA VGA-SCL VGA-VSYNC VGA-HSYNC VGA-B-IN VGA-G-IN VGA-R-IN VIDEO-IN S-VIDEO-C-IN S-VIDEO-Y-IN S-VIDEO-SW COM-VIDEO-Y-IN COM-VIDEO-Pb-IN COM-VIDEO-Pr-IN DIGITAL MAIN CBA UNIT AUDIO SIGNAL TO DIGITAL SIGNAL PROCESS BLOCK DIAGRAM VIDEO SIGNAL Video Block Diagram FL10.1BLV 9-4 SP862 SPEAKER R-CH SP861 SPEAKER L-CH JK851 HEADPHONE JACK JK841 DIGITAL AUDIO-OUT (COAXIAL) JK721 HDMIAUDIO(L)-IN JK722 HDMIAUDIO(R)-IN JK711 PC-AUDIO-IN JK741 COMPONENTAUDIO(L)-IN JK742 COMPONENTAUDIO(R)-IN JK753 AUDIO(L) -IN JK754 AUDIO(R) -IN CN861B 1,2 SP(L) 3,4 SP-GND CN862B 1,2 SP(R) 3,4 SP-GND JUNCTION-B CBA CL862 1 2 JUNCTION-C CBA CL861 1 2 BUFFER Q841 CN801A 1,2 3,4 CN861A 1,2 3,4 15 11 12 14 2 4 1 5 Q771 Q722 CN701 13 15 24 22 23 AUDIO(L) AUDIO(R) INPUT1 INPUT0 SPDIF MAIN CBA 8 9 DRIVE 6 MUTE CONTROL 1 DRIVE 4 IC801 (AUDIO AMP) Q773 BUFFER CN701 CN702 3,4 HEADPHONE(R) 3,4 9,10 HEADPHONE(L) 9,10 1,2 SP(R) 1,2 9 10 CONTROL LOGIC Q774 BUFFER 13 3 IC771 (AUDIO SELECTOR) JACK CBA 3 1 Q801 5 7 IC803 (OP AMP) CN702 13 15 24 22 23 WF7 CN3701 8 6 CN3702 2 20 CN302 2 SPDIF 20 AUDIO-MUTE CN3702 10 12 CN3702 13 11 CN301 8 AMP(R)-OUT 6 AMP(L)-OUT CN302 10 INPUT1 12 INPUT0 CN302 13 AUDIO(L) 11 AUDIO(R) DIGITAL MAIN CBA UNIT SPDIF AMP(R)-OUT AMP(L)-OUT INPUT1 INPUT0 AUDIO-MUTE AUDIO(L) AUDIO(R) TO DIGITAL SIGNAL PROCESS BLOCK DIAGRAM TO SYSTEM CONTROL BLOCK DIAGRAM TO DIGITAL SIGNAL PROCESS BLOCK DIAGRAM AUDIO SIGNAL Audio Block Diagram [LC220SS1, 22MF330B/F7, LC220EM1(Serial No.:DS1A,DS2A,TH1A), LC220SL1(Serial No.:DS1A,DS2A,TH1A)] FL10.1BLA 9-5 SP(L) GND SP(R) GND SP862 SPEAKER R-CH BUFFER Q841 SP861 SPEAKER L-CH JK851 HEADPHONE JACK JK841 DIGITAL AUDIO-OUT (COAXIAL) JK721 HDMIAUDIO(L)-IN JK722 HDMIAUDIO(R)-IN JK711 PC-AUDIO-IN JK741 COMPONENTAUDIO(L)-IN JK742 COMPONENTAUDIO(R)-IN JK753 AUDIO(L) -IN JK754 AUDIO(R) -IN CN872 1 2 CN871 1 2 15 11 12 14 2 4 1 5 Q771 Q722 CN701 13 15 24 22 23 AUDIO(L) AUDIO(R) INPUT1 INPUT0 SPDIF MAIN CBA 8 9 DRIVE 6 MUTE CONTROL 1 DRIVE 4 IC801 (AUDIO AMP) Q773 BUFFER CN701 CN702 3,4 HEADPHONE(R) 3,4 9,10 HEADPHONE(L) 9,10 1,2 SP(R) 1,2 9 10 CONTROL LOGIC Q774 BUFFER 13 3 IC771 (AUDIO SELECTOR) JACK CBA 3 1 Q801 5 7 IC803 (OP AMP) CN702 13 15 24 22 23 WF7 CN3701 8 6 CN3702 2 20 CN302 2 SPDIF 20 AUDIO-MUTE CN3702 10 12 CN3702 13 11 CN301 8 AMP(R)-OUT 6 AMP(L)-OUT CN302 10 INPUT1 12 INPUT0 CN302 13 AUDIO(L) 11 AUDIO(R) DIGITAL MAIN CBA UNIT SPDIF AMP(R)-OUT AMP(L)-OUT INPUT1 INPUT0 AUDIO-MUTE AUDIO(L) AUDIO(R) TO DIGITAL SIGNAL PROCESS BLOCK DIAGRAM TO SYSTEM CONTROL BLOCK DIAGRAM TO DIGITAL SIGNAL PROCESS BLOCK DIAGRAM AUDIO SIGNAL Audio Block Diagram [LC220EM1(Serial No.:TH2A), LC220SL1(Serial No.:TH2A)] FL10.1BLA_2 9-6 7 9 4 6 HDMI-IN2 1 3 10 12 16 15 TMDS-D0(+) TMDS-D0(-) TMDS-D1(+) TMDS-D1(-) TMDS-D2(+) TMDS-D2(-) TMDS-CLOCK(+) TMDS-CLOCK(-) SDA SCL 8 7 11 10 14 13 5 4 1 2 42 41 45 44 48 47 39 38 36 37 AUDIO(L) AUDIO(R) SPDIF AMP(L)-OUT AMP(R)-OUT IF-AGC S-VIDEO-SW DIF-OUT1 DIF-OUT2 A3 A2 C8 B6 A6 HDMI SW 26 27 23 24 20 21 17 18 A/D CONVERTER P21 P22 N21 N22 M21 M22 L21 L22 VIDEO DECODER HDMI I/F AUDIO DECODER AUDIO I/F DEMODULATOR /MPEG DECODER SW VGA-HSYNC VGA-VSYNC VGA-SCL VGA-SDA IC3301 (DIGITAL SIGNAL PROCESS) R1 IF-AGC G22 S-VIDEO-SW H2 H1 C1 D1 T2 T3 K1 G1 F1 E1 F3 E2 F2 G3 E3 H3 K2 IC3702 (HDMI SW) VGA-R-IN VGA-G-IN VGA-B-IN VIDEO-IN S-VIDEO-C-IN S-VIDEO-Y-IN COM-VIDEO-Y-IN COM-VIDEO-Pb-IN COM-VIDEO-Pr-IN TMDS-D0(+) TMDS-D0(-) TMDS-D1(+) TMDS-D1(-) TMDS-D2(+) TMDS-D2(-) TMDS-CLOCK(+) TMDS-CLOCK(-) SDA SCL JK3702 7 9 4 6 1 HDMI-IN1 3 10 12 16 15 JK3701 TO AUDIO BLOCK DIAGRAM TO VIDEO BLOCK DIAGRAM TO VIDEO BLOCK DIAGRAM VGA-HSYNC VGA-VSYNC VGA-SCL VGA-SDA DIGITAL MAIN CBA UNIT DIGITAL SIGNAL PROCESS TP POL CPV OE STV Y20,AA1-AA4,AA20-AA22, AB1-AB3,AB21,AB22 AA7,AA8-10,AA12,AA13, AA15,AA16,AB7-10,AB12, AB13,AB15,AB16 LVDS TX B9 A9 B10 A10 B11 A11 B12 A12 B13 A13 C12 C13 B8 A8 B22 D20 C20 A21 A20 B1,B9,C2,C8, D1,D3,D7,D9, F1,F9,G2,G8, DATA(0-15) H1,H3,H7,H9 M2,M3,M7,M8, N2,N3,N7,N8, ADDESS(0-12) P2,P3,P7,P8,R2 IC3201 (DDR2 SDRAM) VIDEO SIGNAL CN3902 23 22 21 20 19 18 13 12 11 10 9 8 16 15 6 5 4 3 1 AUDIO SIGNAL LLV0(+) LLV0(-) LLV1(+) LLV1(-) LLV2(+) LLV2(-) LLV3(+) LLV3(-) LLV4(+) LLV4(-) LLV5(+) LLV5(-) LLVCLK(+) LLVCLK(-) TP POL CPV OE1 STV LCD MODULE ASSEMBLY Digital Signal Process Block Diagram FL10.1BLD 9-7 Q1001,Q1002 SW+12.5V PROTECT3 BACKLIGHT-SW BACKLIGHT-ADJ MAIN CBA TO SYSTEM CONTROL BLOCK DIAGRAM PANEL+15V INV+31V Q1023, Q1024 SW Q1402 2 1 15 16 3 Q1401 4 DTC 12 VCC 14 VREF 8 11 Q1003 DRIVE Q1006, Q1009, Q1010 DRIVE Q1005, Q1007, Q1008 6 5 8 7 6 5 Q1551 OVER VOLTAGE PROTECTOR 2 3 1 OVER VOLTAGE PROTECTOR OVER VOLTAGE PROTECTOR Q1651 Q1550 6 5 7 OVER VOLTAGE PROTECTOR Q1751 14 Q1650 OVER VOLTAGE PROTECTOR Q1750 1 4 2 3 T1700 1 4 8 7 6 5 OVER VOLTAGE PROTECTOR CURRENT CONTROL SWITCH Q1700 CURRENT CONTROL SWITCH Q1600 CURRENT CONTROL SWITCH Q1500 2 3 T1600 1 4 8 7 13 12 IC1002 (COMPARATOR) 5 6 OSC PWM CONTROL LOGIC IC1001 (PWM CONTROL) Q1004,Q1011, Q1013,Q1014 SW+12.5V T1500 2 3 CN1750 1 2 CN1650 1 2 CN1550 1 2 LCD MODULE ASSEMBLY BACK LIGHT BACK LIGHT BACK LIGHT Inverter Block Diagram FL10.1BLINV AC601 AC CORD LINE FILTER L601 9-8 BRIDGE RECTIFIER D601- D604 MAIN CBA Q602 SWITCHING CONTROL Q601 SWITCHING 4A/125V F601 4A/125V HOT CIRCUIT. BE CAREFUL. FEED BACK Q631 COLD 2 3 HOT 1 12 13 14 16 9 10 15 11 4 IC601 6 7 4 3 2 T601 CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. Q634 +5V REG. 4A/125V Q633 Q632 SW+12.5V Q201,D202 SW+13V Q202,Q203 SWITCHING Q205 SW+24.5V 3 IC631 +3.3V REG. 2 Q637 SW+5V Q638,Q639 SWITCHING Q635,Q636 SW+5V Q640,D662 SW+3.3V Q641 SW+9V Q402 Q206 SW-7.1V CN301 10 16 21,22 19,20 13,14 CN201 8 2,3 4 6,7 10 P-ON+3V P-ON+7V AL+3.3V P-ON+3.3V P-ON+5V CN3701 10 16 21,22 19,20 13,14 P-ON-H1 P-ON-H2 PROTECT1 PROTECT2 VCOM DIGITAL MAIN CBA UNIT TO SYSTEM CONTROL BLOCK DIAGRAM PANEL+15V PANEL+13V P-ON+3.3V P-ON+9V INV+31V P-ON+5V SP+14V TUNER+5V AL+3.3V P-ON+3V P-ON+7V AL+3.3V P-ON+3.3V P-ON+5V LCD MODULE ASSEMBLY NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. PANEL-7.1V PANEL+13V PANEL+24.5V P-ON+3.3V VCOM CAUTION ! : For continued protection against risk of fire, replace only with same type 4 A, 125V fuse. ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V. Power Supply Block Diagram FL10.1BLP SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts that have these special safety characteristics are identified in this manual and its supplements; electrical components having such features are identified by the mark “#” in the schematic diagram and the parts list. Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts that do not have the same safety characteristics as specified in the parts list may create shock, fire, or other hazards. Notes: 1. Do not use the part number shown on these drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since these drawings were prepared. 2. All resistance values are indicated in ohms (K = 103, M = 106). 3. Resistor wattages are 1/4W or 1/6W unless otherwise specified. 4. All capacitance values are indicated in µF (P = 10-6 µF). 5. All voltages are DC voltages unless otherwise specified. 6. This schematic diagrams are masterized version that should cover the entire FL10.1 chassis models. Thus some parts in detail illustrated on this schematic diagrams may vary depend on the model within the FL10.1 chassis. Please refer to the parts lists for each models. 7. The Circuit Board layout illustrated on this service manual is the latest version for this chassis at the moment of making this service manual. Depend on the mass production date of each model, the actual layout of each Board may differ slightly from this version. 10-1 FL10.1SC LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V. 2. CAUTION: Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown, first check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. 3. Note: 1. Do not use the part number shown on the drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since the drawings were prepared. 2. To maintain original function and reliability of repaired units, use only original replacement parts which are listed with their part numbers in the parts list section of the service manual. 4. Voltage indications on the schematics are as shown below: Plug the TV power cord into a standard AC outlet.: 2 1 (Unit: Volt) 3 5.0 Voltage 5.0 Power on mode Indicates that the voltage is not consistent here. 5. How to read converged lines 1-D3 Distinction Area Line Number (1 to 3 digits) 3 AREA D3 2 Examples: 1. "1-D3" means that line number "1" goes to the line number "1" of the area "D3". 1 2. "1-B1" means that line number "1" goes to the line number "1" of the area "B1". 1-B1 AREA B1 1-D3 A B C D 6. Test Point Information : Indicates a test point with a jumper wire across a hole in the PCB. : Used to indicate a test point with a component lead on foil side. : Used to indicate a test point with no test pin. : Used to indicate a test point with a test pin. 10-2 FL10.1SC Main 1 Schematic Diagram 10-3 FL10.1SCM1 Main 2 Schematic Diagram 10-4 FL10.1SCM2 Main 3 & Junction-B Schematic Diagram 10-5 FL10.1SCM3 Main 4 Schematic Diagram CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. 4A/125V CAUTION ! : For continued protection against risk of fire, replace only with same type 4 A, 125V fuse. ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V. 10-6 NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. FL10.1SCM4 Jack& Junction-C Schematic Diagram 10-7 FL10.1SCJ Function & Junction-A Schematic Diagram 10-8 FL10.1SCF Digital Main 1 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/6) ~ IC3301 (6/6) in this Digital Main Schematic Diagram Section. 10-9 FL10.1SCD1 Digital Main 2 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/6) ~ IC3301 (6/6) in this Digital Main Schematic Diagram Section. 10-10 FL10.1SCD2 Digital Main 3 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/6) ~ IC3301 (6/6) in this Digital Main Schematic Diagram Section. 10-11 FL10.1SCD3 Digital Main 4 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/6) ~ IC3301 (6/6) in this Digital Main Schematic Diagram Section. 10-12 FL10.1SCD4 Digital Main 5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/6) ~ IC3301 (6/6) in this Digital Main Schematic Diagram Section. 10-13 FL10.1SCD5 Digital Main 6 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/6) ~ IC3301 (6/6) in this Digital Main Schematic Diagram Section. 10-14 FL10.1SCD6 Main CBA Top View [LC220SS1, 22MF330B/F7, LC220EM1(Serial No.:DS1A,DS2A,TH1A), LC220SL1(Serial No.:DS1A,DS2A,TH1A)] CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required. CAUTION ! : For continued protection against risk of fire, replace only with same type 4 A, 125V fuse. ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V. 4A/125V 29 GND 28 GND J214 J215 J200 GND GND CN301 J195 GND LED1 J210 C306 RCV-IN ALL+3.3V J207 GND J198 J209 GND J203 J199 P-ON+3.3V J202 R698 D408 J186 D404 BC301 1 29 CN302 J A017MPW E234498 JS101 DVD-LED Q171 28 Q172 29 R834 C830 C834 P-ON-H1-SW P-ON+9V J085 J089 GND GND J083 GND C838 CN702 Q905 P-ON+9V R932 J084 D807 1 GND 2 C803 C921 C910 J082 GND D907 C916 1 1 R172 C205 R235 R215 C204 R218 R922 C918 R928 2 2 C207 D207 Q206 R223 R254 R222 D652 R217 D205 Q903 Q904 D903 J080 GND Q801 D901 D908 J072 AMP-L-HP D805 J065 D804 C806 D814 C813 9 D806 1 IC801 J073 RIPPLE REJECTION J071 AMP-L-HP J068 SP-GND J066 AMP-R-HP D645 J067 AMP-R-HP from Protect1 J070 J069 GND R635 C654 C653 D665 J078 SP-GND J076 SP-GND J074 GND R675 D666 Q641 R676 R806 R807 J077 R906 D902 D644 INV.+31V DIF J175 J168 2 28 KEY-IN1 J128 AMP-L P-ON-H1 J129 J127 LED-R AMP-R SP-GND JS102 J130 J092 GND J093 Q211 GND J057 R680 LED1 ALL+3.3V PROTECT1 J140 RCV-IN J137 J138 J139 P-ON+3.3V C7A3 J136 J144 GND A3 R236 D208 R241 GND J126 GND J125 D651 D416 J102 INV+32 2 D206 J095 DVD-AL J086 R919 R945 R930 R638 J176 GND D411 CN303 29 Q203 D212 D671 J097 from P-ON-H2 R652 Q902 J099 GND C919 J219 28 DIF + for A JS310 R699 Q202 J160 LCD SW D403 +12.5V D211 J148 INV.+31V R650 R649 R917 R933 L901 R927 SP+14V C831 J088 J081 R925 R637 D414 C805 C645 TOOL NO. 1 2 3 4 5 6 7 8 9 10 GND J064 HOT 25 R924 D646 C608 TM602 J087 R923 D648 IC601 AC601 L804 26 GND R929 J079 P-ON-H2 D647 Q631 J091 J090 GND R926 Q633 C606 Q601 J001 DVD-LED J107 ALL+3.3V CN901 13 CN902 R655 /BLACK TM601 Q602 R609 D605 R612 D607 C602 D608 R611 C601 R601 SA601 HOT CN801A /WHITE BC601 R610 C607 D609 R606 FH601 R634 D635 J075 C604 R604 FH602 L601 1 J096 from P-ON-H2 J060 +7.0V J114 D610 C643 R605 Operation D407 GND D905 R608 J002 R603 D611 D606 BC1004 C605 GND J100 M+10V 2 12 C917 C603 F601 4A/125V C833 D412 J094 C6 91 HOT D601 R607 D6 12 2 J098 J101 P-ON+5V D413 D906 C692 D6 03 CN1750 R912 COLD D604 GND D415 P-ON-H2 J103 C640 D64 3 P-ON+9.0V T601 J110 J108 DVD-MAIN-PWR J106 JS103 1 J113 RISK OF FIREREPLACE FUSE AS MARKED Q205 1 IC901 INV.+31V S-SW J115 C825 J111 LCD+12.5V ALL+3.3V INV.+31V +7.0V J003 BC1003 A-MUTE J118 P-ON+5V 2 D632 D60 D410 +3.5Vfor1.8V R699 Q209 R1002 J174 GND C201 R1004 C656 JS633 Q215 J120 R656 R684 INV.+31V Q901 C928 L902 D640 J105 COLD D650 GND J121 D406 D203 R913 D653 D649 R904 4 Q401 R1709 J005 IC631 R659 D401 R679 C827 R253 D402 C401 +7.0V J124 D636 R91 J004 INV.+31V R1705 D204 D670 D641 R1756 C1755 Q1750 R651 D904 D639 C633 C1701 C638 D638 J006 +31V C1704 R1704 D631 D1700 J007 +31V C1700 D1757 D1762 D633 D1751 Q1401 C650 D637 D668 C641 C636 J134 DVD-Pb Q402 R219 C632 J141 DVD-Y ALL+3.3V R688 R689 D301 IF-AGC J122 Q634 D642 for All+3.3V R682 R631 J009 D1702 Q643 INV3 FB D808 C647 D655 C639 GND Q210 D657 J112 D302 SDA J147 D418 for RESET J143 J142 J123 R683 JS632 +7.0V D1701 R672 J156 GND C631 FET3 S T1700 R630 J109 GND D1704 SCL J152 from P-ON-H2 PROTECT2 LCD+12.5V J158 for RESET J217 R663 C1702 D1758 GND C1404 J163 R616 J116 J012 -7.5V J155 J150 -7.5V C649 R690 J008 FET6 D R602 J206 R1005 C1403 D659 P-ON+5.0V Q636 C648 J014 +7.0V P-ON+5.0V J146 D660 J104 Q635 8 70 R1 J011 FET5 D D1755 D409 J188 D+12.5V3 JS1003 R1053 R665 TU301 TU302 ALL+3.3V D803 R664 C1703 2 J151 D417 GND GND J149 D405 01 GND R662 GND J017 R1707 D1760 LCD SW J145 R661 D662 C1601 J019 P-ON 3.3V J154 J159 J157 LCD+12.5V R245 TUNER A S TU+5.0V R252 ALL+3.3V R1706 D1750 PROTECT2 J170 +7.0V J020 GND C1705 C1751 C1750 from P-ON-H2 R216 J013 PROTECT1 J165 R250 D1703 Q1751 D1761 LCD SW J153 D654 Q1650 D1759 R1757 J167 J162 J161 D201 J172 P-ON-H1 J169 Q632 5Vfor3.3V BC1002 D1661 R207 P-ON+3.3V SW R244 Q637 J015 INV2 FB R1657 GND R2 J022 R213 R208 5Vfor3.3V J023 Q640 D1012 GND C660 INV.+31V D1756 P-ON+3.3V GND J062 C218 J051 R1026 R1027 C1 J026 R670 J018 INV.+31V 3 H.V CAUTION J049 C2 J045 GND D1009 GND J030 GND GND VGH+25.6V J173 J164 D210 D303 J171 TU+5V VGL-5.5V L301 J178 GND D1404 D1600 R1604 C1600 D1656 D1662 C1658 J027 R1609 J016 D1651 C1752 Q1012 C1602 C1604 C1754 C175 3 D1753 D1045 5V-S C303 J205 J029 D1604 J025 FET2 S T1600 H.V CAUTION D1763 J166 LCD+12.5V Q201 D1010 JS307 PANEL+24.5V J177 D202 R1049 C1014 JS1005 JS306 J187 GND J180 J179 R1050 D1764 C652 R671 D1752 GND GND R1608 R1605 C1650 D1754 J047 D1013 D1767 C1603 J021 FET4 D J035 32V-S JS308 5V-A JS309 for S J182 C1402 D1765 R1607 C208 JS1002 GND J028 FET3 D D1658 Q1004 Q1010 D1406 D1603 D1601 Q1651 GND FB V D1602 P-ON+5.0V J193 32V-A JS305 TU+5V J189 GND C209 C1003 R1048 J033 J031 C1605 R1606 C1651 D1655 D1650 R1028 R1029 J034 DRIVE+12.5V 7.0Vfor1.0V J204 D304 C217 J183 PROTECT3 J181 BL-ADJ. REF JS1001 C1013 R228 Q208 R229 J190 D1011 D1561 Q1550 D1660 C1555 D1659 C1657 R1656 D1663 D1657 C1652 D1654 C1653 D1664 D1667 D1565 GND VGL-5.5V J184 DRIVE+12.5V Q1001 D1005 D1665 D1564 for RT J036 +IN3 J032 GND 4 Q1011 D1003 D1402 INV1 FB Q207 LCD+12.5V J197 J191 VCOM J185 BL-SW D1004 D1007 JS1004 J038 R226 J194 VCOM-PWM D1403 INV.+31V J208 GND Q1002 J192 J213 J039 DRIVE+12.5V D1401 FB V D1567 C1500 D1559 D1556 C1550 J042 INV.+31V J040 INV.+31V R1509 C1501 J037 D1562 D1554 J048 J046 C1504 R1042 D1500 R1504 D1006 R1019 R1022 Q1009 J043 GND J044 GND R1505 R1556 Q1006 D1502 D1503 FET1 G FET2 G R1018 R1072 J053 J052 C1012 J054 C1502 J050 C1006 R1071 GND D1652 D1653 R1030 R1031 J055 FET1 S 11 J058 GND Q1005 Q1007 BC1001 Q1008 R1508 CN1550 D1550 C1551 J056 FET1 S J061 GND R1557 D1504 R1012 D1560 C1503 J216 P-ON+3.3V J212 GND REF D1557 D1501 C1505 D1563 D1558 D1553 C1552 CAUTION J059 1 J041 INV.+31V CN1650 10 2 CN201 FET2 D D1551 BA0171F0101 4 Q1551 R1507 FET1 D T1500 H.V 5 C1554 R1506 D1552 D1555 GND 53 C15 J196 +7.0Vfor1.0V J201 P-ON+5.0V GND NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. C812 D813 J063 GND 8 1 CN102 D656 CN872 COLD A B C D 10-15 E BA0171F01014 Main CBA Bottom View [LC220SS1, 22MF330B/F7, LC220EM1(Serial No.:DS1A,DS2A,TH1A), LC220SL1(Serial No.:DS1A,DS2A,TH1A)] CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. CAUTION T1500 H.V CN1550 C1652 CN1650 R1751 D1759 C1650 D1754 D1763 D1753 3 C1754 C175 C1752 D1756 R630 D1701 JS632 +7.0V 3 R1706 T1700 J009 R1703 D1702 R659 C632 FET6 D C1702 J008 C1707 +7.0V J124 D633 Q1750 2 R1750 D632 J003 INV.+31V BC1003 5V V 31 P1 5V V .5 3. -7 D 4V 0V 0V GN 7. S1 3 D64 5. T601 J113 P-ON+9.0V R602 C6 91 F601 4A/125V R603 Operation D611 R604 BC601 R606 FH601 FH602 L601 SA601 R601 J001 CN801A C601 R611 R636 R642 C645 GND J064 R643 R644 HOT 1 HOT AC601 C608 C819 C602 D607 C607 D609 R641 R609 D605 R612 Q601 R610 D608 C801 Q602 C606 Q633 R681 D645 R646 R653 R655 J069 GND R638 Q631 J002 R605 D606 R640 C604 BC1004 R608 R658 R634 R647 D647 J075 D635 IC601 D656 2 C603 D646 C812 12 D6 R607 D610 J114 C644 SP+14V R807 R654 R639 R645 R806 J077 J079 P-ON-H2 INV.+31V D644 R676 Q641 D666 C653 R635 D601 HOT D60 C605 C643 D648 COLD D604 +7.0V J219 C916 R930 CN1750 D906 COLD 03 D6 C692 Q903 R922 C919 R928 IC901 J099 GND R902 R901 C901 C902 INV.+31V J105 +7.0V D1755 D1758 INV3 FB R1752 C1756 C640 R1754 J005 C1751 C1750 D1750 D1751 R1709 C1755 R1705 D653 D1760 R1756 D641 R913 J004 INV.+31V +31V J006 C1704 R1704 D1757 C1701 D1762 C1700 D631 D1700 +31V J007 D636 D638 R401 L902 C904 R908 C907 C931 R907 C906 R942 C924 C929 C928 R941 J095 DVD-AL C925 D639 R403 C402 R404 C905 C922 L901 R933 R931 C930 C923 C401 D402 R402 R1702 R685 R686 Q901 IC631 R918 R917 R934 D205 R936 R915 R935 R916 R414 C926 R413 R937 FET3 S R631 D668 D637 FET5 D J011 Q1700 H.V CAUTION C1706 C1703 C636 D401 D1653 D1654 C1653 T1600 H.V CAUTION D1651 D1752 C1705 R1707 C631 C1651 D1655 D1650 R1650 R1753 Q1751 R660 R633 R632 D1761 J013 D1662 R1755 D1703 R1757 D1704 J156 GND C1658 C1757 J116 D1661 R1 70 8 J109 GND D1656 D1658 Q1650 J015 R1657 GND C633 D1550 R1651 R1550 D1663 D1659 D1657 C1657 R1653 C1601 D659 R668 C1600 R1652 R1654 C1659 R1700 D662 R1701 C1607 R1605 J016 J012 C638 C1551 C1550 D1559 D1556 C1555 R1655 J021 FET4 D J018 INV.+31V R672 4 Q401 C1660 Q1651 R1656 4 Q640 C651 Q638 R666 R661 R662 D654 R683 R684 INV.+31V J120 R656 Q902 D416 J102 INV+32 2 D206 D670 R91 C1552 R1552 Q1550 R1554 C1556 D1660 J025 FET2 S R1759 R673 R674 R669 R667 Q639 C650 BC1002 -7.5V C641 D1652 C1606 J028 Q1600 D1600 R1604 R671 C639 R689 D1553 C1500 D1561 R1758 R1658 FET3 D D1604 INV.+31V Q643 D1551 R1607 C1603 C1604 J019 J017 R1551 C1507 C1758 R1760 C1401 R1659 D1601 R1558 R1560 C1558 R1559 J029 GND R1069 R1055 R1060 R1054 R1059 J022 J020 D1554 D1562 R1606 R1608 C1602 J023 C1506 D1567 IC1002 R1066 R1407 J030 GND D1009 R1067 R1046 R1034 R1045 R1035 R1044 R1065 C1019 C1020 R1063 R1061 R1062 D1403 D1012 C1016 R1052 R1056 R1068 R1008 R1109 5Vfor3.3V J054 D1500 R1601 R1600 R1603 R1602 R1051 R1406 C1011 R1033 R1009 R1053 R1047 R1405 R1403 C1403 R1404 C1404 J163 GND 5Vfor3.3V GND C1605 D1603 R1609 R670 C660 +7.0V R1503 R1502 R1501 R1500 D1502 R1042 C1022 R1043 R1509 R1660 C1661 R1070 C1004 C1017 R1048 JS1004 D1011 C1015 R1106 Q1402 C652 J031 FB V D1602 J026 GND D1558 R1553 R1555 J043 GND J044 GND C1008 R1023 C1012 C1010 R1029 Q1010 GND J213 R1058 R1032 J047 J049 C2 R1015 C1 J045 R1024 Q1004 R1027 J051 REF C1005 R1064 R1016 R1076 R1075 R1026 R1028 R1074 Q1014 GND C1009 Q1007 R1018 R1037 R1003 R1012 R1107 Q1023 R1105 D1764 J027 GND D1563 C1505 C1557 R1031 R1030 R1021 R1020 C1007 C221 C1021 C219 C218 R1025 R1036 Q1013 D+12.5V3 JS1003 R1005 R1402 Q1024 C1023 R1110 Q1012 J032 GND INV2 FB R663 D1557 D1501 J062 GND J188 Q1401 R1014 R1401 GND J060 R649 R650 R652 D651 R220 D652 R218 R675 C654 R409 1 J033 R688 R637 CN102 E R929 R927 D903 D414 8 J034 GND R912 R945 J070 C813 J067 C811 R839 D809 D814 D810 R816 J065 AMP-R-HP R818 R809 C805 DRIVE+12.5V J037 R925 Q904 D665 14 D1013 D1767 R1556 INV.+31V J038 5 J041 INV.+31V J039 +IN3 J036 8 FET2 D C1504 INV1 FB D1565 1 7 J050 R1504 for RT D1765 C648 J014 +7.0V C917 R906 from Protect1 J074 GND R842 C821 R819 R817 R808 D813 R924 C920 C910 R802 R820 1 J073 IC801 RIPPLE REJECTION J071 AMP-L-HP J068 SP-GND D1667 C1502 R1505 C1501 D1564 D1664 FET1 S D1503 J042 INV.+31V J040 INV.+31V D1665 R682 1 CN902 R923 C918 R920 2 9 J052 Q635 D655 2 13 D908 J066 AMP-R-HP J063 GND 12 D902 D805 FET2 G D640 D901 D804 C806 8 R921 1 Q801 GND J082 D907 R932 C810 R803 C818 J084 C921 D806 1 5 D905 R919 Q905 GND R815 R840 R903 J086 J081 C803 J072 R911 R910 C817 R814 R813 R841 R173 GND D807 J078 SP-GND J076 SP-GND C912 C903 R926 GND P-ON+9V J080 GND R217 R943 C927 R939 R938 R940 CN901 J090 GND J088 J089 GND C816 J112 D642 1 25 C831 C914 C809 R171 CN702 J083 GND C838 R216 R905 2 R811 R810 C834 C204 R215 GND 26 J055 J053 GND GND R690 D904 IC902 4 C915 R909 C832 R832 C828 Q172 C830 R834 R833 29 C911 28 ALL+3.3V J091 L804 J094 R651 D650 R904 D413 8 ALL+3.3V J087 P-ON-H1-SW P-ON+9V J085 R221 Q206 JS103 J107 5 R205 C202 R203 R202 R251 Q636 J123 D649 P-ON+5V C913 J100 M+10V R222 J103 C908 C909 IC803 R174 D407 C223 C222 R825 1 C206 J106 J101 P-ON+5V R1508 Q1500 GND FET1 G P-ON+5.0V C649 Q634 for All+3.3V R219 R235 R826 R831 Q171 JS101 DVD-LED C826 R175 D412 FB V D1406 J035 J059 53 D1555 ALL+3.3V D204 D203 8 R665 C647 D1402 Q637 for RESET J217 Q205 J098 GND R254 R830 C829 R823 P-ON-H2 R253 C205 J111 J108 DVD-MAIN-PWR R223 R838 R821 R837 R836 R172 J110 GND D415 4 DVD-LED D207 C207 R824 R822 R678 LCD+12.5V C833 R2 01 Q1009 J046 DRIVE+12.5V FET1 S Q1006 J048 9 Q1003 R664 J148 1 D406 D1045 J104 Q211 R407 R406 R408 GND J093 2 C825 JS1005 R244 D657 C827 Q1011 D1003 1 C1013 Q215 INV.+31V J097 from P-ON-H2 GND J126 GND R240 R239 C225 J128 J125 R238 C224 R237 J096 from P-ON-H2 -7.5V J122 J118 D1010 R245 R616 D671 R241 D208 J145 ALL+3.3V S-SW J115 C201 R250 R1072 R1022 J056 Q1008 BC1001 D1552 FET1 D C1503 Q1005 R1019 R1017 D211 J142 J136 J137 J138 J139 J140 R236 RCV-IN ALL+3.3V P-ON+3.3V LED1 PROTECT1 GND J144 J143 JS633 +12.5V D417 Q210 Q402 R204 J158 D660 GND J092 J130 J129 JS102 SP-GND LED-R AMP-R AMP-L J127 KEY-IN1 P-ON-H1 J134 DVD-Pb for RESET J058 GND D1560 R1557 D1504 R1071 D1006 C1018 C1014 P-ON+3.3V SW D405 LCD+12.5V D418 LCD SW J153 J157 LCD+12.5V PROTECT2 R679 J121 C656 J174 GND J151 GND C1006 D1404 J205 J061 16 IC1001 R1049 D210 R207 Q632 P-ON+5.0V R1050 J178 GND R208 D201 J159 REF JS1001 CN201 1 D1007 JS1002 J166 J164 LCD+12.5V Q201 R1507 D1004 Q1001 D1005 C15 R1506 2 C1003 C1402 GND D403 R252 LCD SW R648 J131 28 J141 DVD-Y R214 R405 J160 D212 LCD SW R680 J057 GND CN303 29 D803 Q203 J162 J161 J170 J146 from P-ON-H2 R1004 R1002 R212 J165 J154 R677 2 J147 Q202 R211 R412 R303 R302 J168 1 IF-AGC GND C208 D202 R213 R1006 C210 C211 C212 C213 C214 R227 D411 J167 PROTECT2 ALL+3.3V VGL-5.5V J184 DRIVE+12.5V J183 PROTECT3 J181 BL-ADJ. C209 J173 from P-ON-H2 J150 J152 SDA D301 A-MUTE R225 R224 J190 C217 R232 Q209 J635 J634 C302 C309 GND CN302 J155 SCL D302 J191 VCOM J185 BL-SW 8 J179 PROTECT1 C220 C227 C226 R242 5 C1554 Q1551 10 11 J192 LCD+12.5V J197 R1007 R234 J206 BC301 D404 JS303 R313 C315 C314 JS301 JS805 JS804 J175 J176 28 JS801 JS802 for A JS310 DIF + 29 TU301 TU302 P-ON+3.3V C215 R233 VCOM-PWM GND GND J169 D1401 Q1002 J194 J177 VGH+25.6V TU+5.0V J208 GND 4 IC201 1 L301 TUNER S A R411 C216 R230 R231 R699 D409 D408 D410 R698 +3.5Vfor1.8V J202 J203 J198 J199 J209 R228 Q208 GND J180 PANEL+24.5V VGL-5.5V J149 AMP-L-HP J212 GND C303 D303 J171 TU+5V P-ON 3.3V WF1 PIN 4 OF CN302 R226 J182 P-ON-H1 WF3 PIN 6 OF CN302 J216 P-ON+3.3V Q207 J189 GND GND WF2 PIN 8 OF CN302 4A/125V J196 +7.0Vfor1.0V J201 P-ON+5.0V GND GND GND RCV-IN C305 J187 JS309 for S DIF - 2 WF7 PIN 13 OF CN302 CAUTION ! : For continued protection against risk of fire, replace only with same type 4 A, 125V fuse. ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V. R229 TU+5V JS306 J207 R304 J210 D304 C306 32V-A JS305 P-ON+3.3V LED1 J195 GND R307 R306 R305 JS304 L303 C682 L302 J117 J186 1 GND 5V-A C311 C310 GND CN301 J172 32V-S JS308 ALL+3.3V J215 C681 J200 GND J204 J193 JS307 5V-S JS803 WF4 PIN 15 OF CN302 7.0Vfor1.0V P-ON+5.0V WF5 PIN 17 OF CN302 GND J214 GND C684 C683 28 29 WF6 PIN 19 OF CN302 Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required. D808 CN872 C D 10-16 B A COLD BA0171F01014 Main CBA Top View [LC220EM1(Serial No.:TH2A), LC220SL1(Serial No.:TH2A)] CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required. CAUTION ! : For continued protection against risk of fire, replace only with same type 4 A, 125V fuse. ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V. 4A/125V 28 GND 29 GND J214 J215 J200 GND GND J186 D404 BC301 1 2 29 DIF J175 CN302 1 T R172 A017MPW E234498 C205 R235 JS101 DVD-LED Q171 R215 C204 R218 28 Q172 29 R834 C830 J083 GND C838 P-ON+9V R932 J084 D807 1 GND 2 C803 C921 C910 J082 GND D907 C918 D903 Q905 CN702 R922 Q904 1 2 C207 D207 R223 R254 R222 Q206 R217 R928 C916 J176 GND J168 2 28 KEY-IN1 J128 AMP-L P-ON-H1 J129 J127 LED-R AMP-R SP-GND JS102 J130 J092 GND J093 Q211 GND J057 R680 LED1 ALL+3.3V PROTECT1 J140 RCV-IN J137 J138 J139 P-ON+3.3V C7A3 J136 J144 GND A3 R236 D208 R241 GND J125 J126 GND D652 J102 INV+32 2 D206 D205 J099 GND J080 GND Q801 D901 D908 J072 AMP-L-HP D805 J065 D804 C806 D814 C813 9 D806 1 IC801 J073 RIPPLE REJECTION J071 AMP-L-HP J068 SP-GND J066 AMP-R-HP D645 J067 AMP-R-HP J070 C654 J069 GND R635 J078 SP-GND J076 SP-GND J074 GND R906 R675 D666 Q641 D665 C653 R806 R807 J077 R676 D644 D902 from Protect1 C919 GND R919 R945 R930 INV.+31V 28 DIF + for A JS310 D411 CN303 29 Q203 D671 D651 D416 J095 DVD-AL C928 D906 R927 R638 P-ON-H1-SW P-ON+9V J085 J081 R925 R637 D414 C645 CN301 J195 GND LED1 J210 C306 RCV-IN ALL+3.3V J207 GND J198 J209 GND J203 J199 P-ON+3.3V J202 R698 Q202 D212 J097 J096 from P-ON-H2 Q902 R917 R933 L901 IC901 P-ON+9.0V J086 C834 J089 GND C805 GND J064 R611 HOT TOOL NO. A B C D E F G H I J C831 J088 R924 D646 C608 TM602 R923 D648 IC601 AC601 J087 25 GND Q633 R609 D605 R612 Q601 J001 Q631 L804 26 J090 GND R926 R655 /BLACK TM601 Q602 C606 C602 D608 D607 R601 SA601 /WHITE BC601 R610 C607 D609 R606 FH601 J091 GND CN901 R929 J079 P-ON-H2 D647 R604 FH602 L601 R634 D635 J075 C604 DVD-LED J107 ALL+3.3V 2 13 J219 J114 C643 R605 Operation GND J100 M+10V D413 D905 R608 J002 R603 D611 D606 BC1004 C605 F601 4A/125V C833 D412 D407 J103 12 SP+14V R607 D610 D6 12 HOT D601 C603 C601 from P-ON-H2 J060 +7.0V D604 J098 J101 P-ON+5V C917 91 C6 2 R652 R650 R649 J120 R656 R684 INV.+31V Q901 IC631 L902 COLD C692 D6 03 CN1750 J160 LCD SW D403 +12.5V D211 J148 INV.+31V Q215 D64 3 GND D415 P-ON-H2 1 R912 HOT D408 J174 GND C656 JS633 R616 T601 J110 J108 DVD-MAIN-PWR J106 J094 CN902 S-SW J115 C825 JS103 1 J113 RISK OF FIREREPLACE FUSE AS MARKED Q205 C640 INV.+31V A-MUTE J111 LCD+12.5V ALL+3.3V INV.+31V +7.0V J003 BC1003 GND J121 J118 P-ON+5V 2 D632 CN801A D410 +3.5Vfor1.8V R699 Q209 R1002 C201 R1004 Q1401 GND C1404 J163 R683 D402 D640 R679 D406 D203 R904 J105 D60 D649 D650 Q903 D653 R1709 J005 R651 R913 J004 INV.+31V R1705 J134 DVD-Pb C827 R253 4 Q401 D641 R1756 C401 +7.0V J124 Q1750 D401 J141 DVD-Y Q402 D204 D670 R91 D638 D636 C1701 C638 D301 IF-AGC J122 D904 D639 D631 C633 R1704 C1755 D1751 D1758 D1700 J007 +31V C1700 D1757 D1762 D633 1 J206 R1005 D1011 C1403 D637 D668 C641 C636 J006 +31V C1704 R689 R659 D1702 C632 SDA J147 ALL+3.3V R219 INV3 FB D808 C647 R688 C1702 COLD Q210 Q634 D642 for All+3.3V R682 R631 J009 C631 J008 FET6 D R602 -7.5V D655 Q643 D302 D418 GND J142 D657 J112 from P-ON-H2 for RESET J143 J123 C639 C1703 FET3 S JS632 +7.0V D1701 R672 J156 GND R1707 T1700 R630 J109 GND D1704 SCL J152 for RESET J217 R663 J155 J150 D803 C649 R690 -7.5V 8 R1706 D1755 D409 J188 D+12.5V3 JS1003 J051 R1053 D1012 R662 P-ON+5.0V C648 J014 +7.0V P-ON+5.0V PROTECT2 D660 J104 Q636 TU301 TU302 ALL+3.3V LCD+12.5V J158 GND GND J149 J146 ALL+3.3V J011 FET5 D 2 LCD SW J151 D417 R664 J116 GND 70 D1760 J154 J159 D405 R665 D659 GND J012 R1 D1750 P-ON+3.3V GND J062 R1018 R1026 R1027 C1 GND J017 P-ON 3.3V J170 J145 R661 D662 C1601 J019 TUNER A S TU+5.0V R252 +7.0V J020 Q635 C1705 C1751 C1750 PROTECT2 R216 J013 from P-ON-H2 R250 D1703 Q1751 D1761 P-ON+3.3V SW D654 Q1650 D1759 D1756 PROTECT1 J165 J157 LCD+12.5V R245 01 R2 INV.+31V R1757 J167 J162 J161 D201 J172 P-ON-H1 Q632 LCD SW J153 5Vfor3.3V BC1002 D1661 R207 C650 Q640 J022 VGH+25.6V J169 J164 R208 Q637 J015 INV2 FB R1657 GND D210 R244 5Vfor3.3V J023 J018 INV.+31V 3 H.V CAUTION J049 C2 J045 GND J047 D1009 GND C660 D1600 R1604 C1600 D1656 C1658 D1662 C1752 J030 GND J026 R213 J178 GND D1404 GND R670 J016 C1754 D1753 J027 R1609 C1604 D1651 D1763 GND J029 J025 FET2 S T1600 D1752 LCD+12.5V Q201 D303 J171 TU+5V VGL-5.5V L301 J205 C652 D1604 R671 C1650 D1754 R1049 D1010 D1045 PANEL+24.5V J173 R1050 C1014 5V-S JS307 C303 D202 J166 JS306 J187 GND J180 J179 J177 JS1005 Q1012 C1602 R1605 GND D1764 J028 FET3 D D1658 C218 R1030 D1013 D1767 R1608 C1603 C1651 D1655 D1650 Q1004 D1765 R1607 J021 FET4 D J035 32V-S JS308 5V-A JS309 for S J182 C1402 GND D1603 C208 JS1002 R1048 GND FB V D1602 D1601 Q1651 D1659 C1657 D1654 C1653 R1656 D1663 D1657 C1652 J033 J031 C1605 P-ON+5.0V J193 32V-A JS305 TU+5V J189 GND C209 C1003 D1406 7.0Vfor1.0V J204 D304 R229 J183 PROTECT3 J181 BL-ADJ. REF JS1001 C1013 J034 DRIVE+12.5V R1606 C175 3 Q1007 D1565 R228 Q208 C217 VGL-5.5V J184 DRIVE+12.5V Q1001 D1005 D1664 D1667 J036 +IN3 J032 GND 4 Q1011 D1003 GND GND for RT D1561 Q1550 D1564 Q207 LCD+12.5V J197 J190 FB V D1665 R226 J194 J191 VCOM J185 BL-SW D1004 D1007 D1402 INV1 FB J208 GND Q1002 J192 JS1004 J038 J212 GND VCOM-PWM D1403 INV.+31V DRIVE+12.5V J216 P-ON+3.3V D1401 J213 J039 D1660 C1555 R1029 J042 INV.+31V J040 INV.+31V R1509 C1501 J037 D1562 Q1010 J046 C1504 R1042 D1500 R1504 J048 D1567 C1500 D1559 D1556 C1550 R1556 R1022 Q1009 J043 GND J044 GND R1505 D1006 R1019 FET2 G D1502 D1503 Q1006 FET1 G R1028 J052 C1502 J050 D1554 H.V CAUTION R1071 C1012 J054 FET1 S C1006 R1072 D1652 D1653 J058 GND Q1005 GND T1500 H.V BC1001 Q1008 J055 CN1550 D1550 J056 R1508 J041 INV.+31V C1551 GND R1557 D1504 C1503 FET1 S 11 R1012 D1560 R1031 J059 J061 GND D1557 D1501 FET1 D 1 FET2 D CN1650 10 2 CN201 J053 D1551 BA017GF0101 4 Q1551 R1507 C1505 D1563 D1555 D1558 D1553 C1552 CAUTION 5 C1554 R1506 D1552 REF 53 C15 J196 +7.0Vfor1.0V J201 P-ON+5.0V GND NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. C812 D813 J063 GND 8 1 CN102 D656 CN872 COLD A B C D 10-17 E BA017GF01014 Main CBA Bottom View [LC220EM1(Serial No.:TH2A), LC220SL1(Serial No.:TH2A)] CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. CAUTION T1500 H.V CN1550 C1652 T1600 H.V CAUTION Q640 C651 C1607 R1751 D1759 CN1650 D1651 C175 C1752 3 D1753 D1701 T1700 D1702 FET3 S R631 D668 R659 C632 FET6 D J008 C1702 C1707 +7.0V J124 D633 Q1750 R1750 D632 J003 2 INV.+31V BC1003 5V V 31 P1 5V V .5 3. -7 D 4V 0V 0V GN 7. S1 3 D64 5. T601 J113 P-ON+9.0V R602 C6 91 12 F601 4A/125V R603 Operation D611 R604 BC601 R606 FH601 FH602 L601 SA601 R601 J001 CN801A C601 R611 R636 R642 C645 GND J064 R643 R644 HOT 1 HOT AC601 C608 C819 C602 D607 C607 D609 R641 R609 D605 R612 Q601 R610 D608 C801 Q602 C606 Q633 R681 D645 R646 R653 R655 J069 GND R638 Q631 J002 R605 D606 R640 C604 BC1004 R608 R658 R634 R647 D647 R807 R654 R639 R645 R806 J077 J075 D635 IC601 D656 2 C603 D646 C812 D60 D6 R607 D610 J114 C644 SP+14V D644 J079 P-ON-H2 INV.+31V R676 Q641 D666 C653 R635 D601 HOT C605 C643 D648 COLD D604 +7.0V J219 C916 R930 CN1750 03 D6 COLD D906 R929 R927 C692 Q903 R922 C919 R928 IC901 J099 GND R901 C901 R902 C902 INV.+31V J105 +7.0V D1755 D1758 INV3 FB R1752 C1756 C640 R1754 J005 D1751 R1709 C1751 C1750 D1750 C1755 R1705 D653 D1760 R1756 D641 R913 J004 INV.+31V +31V J006 C1704 R1704 D1757 C1701 D1762 C1700 D631 D1700 +31V J007 D636 D638 R401 L902 R942 R908 C907 C931 R907 C906 C904 C929 C928 R941 C924 J095 DVD-AL C925 D639 R403 C402 R404 C905 C922 L901 R933 R931 C930 C923 C401 D402 R402 C636 D401 Q401 R1702 R685 R686 Q901 IC631 R934 R936 R915 R935 R916 R414 C926 R413 R937 R918 R917 D416 J102 INV+32 2 D206 D637 FET5 D J011 Q1700 H.V CAUTION C1706 C1703 J009 R1703 Q902 J120 R656 R684 INV.+31V R650 R649 JS632 +7.0V R630 R683 3 R1706 R1707 C631 C1650 D1754 C1705 D1704 J156 GND D1752 D1763 D1756 C1754 Q1751 R660 R633 R632 D654 D1761 J013 D1662 R1753 D1703 D1661 R1757 C1651 D1655 D1650 R1650 R1755 J116 C1757 Q1650 GND J060 J015 R1657 R1 70 8 J109 GND C1658 D1658 D1656 C1601 D659 R668 C1600 R1652 R1654 C1659 R1700 R1701 D662 R666 Q638 R1605 J016 GND C633 D1653 D1654 C1653 C1657 R1653 4 J021 FET4 D J018 INV.+31V J012 C638 D1550 R1651 R1550 D1663 D1659 D1657 R1655 C1660 Q1651 R1656 J025 FET2 S R1759 R673 R674 R669 R667 Q639 R661 R662 BC1002 R672 4 D1652 C1606 R1758 R1658 J028 Q1600 D1600 R1604 R671 -7.5V C641 C1551 C1550 D1559 D1556 C1555 Q1550 R1554 C1556 D1660 C1758 R1760 C1401 R1659 D1601 R1558 R1560 C1558 R1559 J029 GND J030 GND R1069 R1055 R1060 R1054 R1059 C650 R251 J148 R652 D651 D652 R218 D670 R91 C1552 R1552 C1500 D1561 D1567 IC1002 R1066 R1407 R1067 D1009 R1046 R1034 R1045 R1035 R1044 R1065 C1019 C1020 R1063 R1061 R1062 D1403 D1012 C1016 R1052 R1056 R1068 R1008 R1109 D1604 C639 R689 D1553 C1507 R1601 R1600 R1603 R1602 R1051 R1406 C1011 R1033 R1009 R1053 R1047 FET3 D INV.+31V Q643 D1551 R1607 C1603 C1604 J019 J017 R1551 J054 D1500 R1042 R1043 R1509 C1022 R1660 C1661 R1070 C1004 C1017 R1048 JS1004 R1405 R1403 C1403 R1404 C1404 J163 GND J022 J020 D1554 D1562 R1606 R1608 C1602 J023 C1506 R1503 R1502 R1501 R1500 D1502 J043 GND J044 GND C1008 R1023 C1012 C1010 R1029 R1028 Q1010 GND J213 R1058 R1032 J047 J049 C2 R1015 C1 J045 R1024 Q1004 R1027 R1026 J051 REF C1005 R1064 R1016 R1076 R1075 D1011 C1015 R1106 Q1402 R616 5Vfor3.3V GND C1605 D1603 R1609 R670 C660 +7.0V J031 FB V D1602 J026 GND 5Vfor3.3V D1558 R1553 R1555 C1009 Q1007 R1018 Q1014 GND R1074 R1107 Q1023 R1105 GND D1563 C1505 C1557 R1031 R1030 R1021 R1020 C1007 C221 C1021 C219 C218 R1037 R1003 R1012 R1402 Q1024 C1023 R1110 R205 C202 R203 R202 C652 J032 GND INV2 FB R663 D1557 D1501 J062 GND R1025 R1036 Q1013 D+12.5V3 JS1003 R1005 Q1401 R1014 R1401 J033 R688 R637 CN102 E D205 R675 C654 R409 1 J034 GND R912 D903 D414 8 D1764 J027 R682 1 CN902 R945 J070 C813 J067 C811 D809 D814 R839 D810 R816 J065 AMP-R-HP R818 R809 C805 Q1012 J037 R925 Q904 D665 for RT 14 R1556 J039 DRIVE+12.5V 5 J041 INV.+31V INV.+31V J038 GND D1013 D1767 FET2 D C1504 INV1 FB +IN3 J036 8 J050 R1504 D1565 1 7 C1502 R1505 C1501 D1564 D1667 FET1 S D1503 J042 INV.+31V J040 INV.+31V D1765 C648 J014 +7.0V C917 R906 from Protect1 R819 R817 R808 J074 GND R842 C821 R820 1 J073 IC801 RIPPLE REJECTION J071 AMP-L-HP J068 SP-GND J066 AMP-R-HP D813 13 D908 9 J052 Q635 D655 2 D902 D804 J063 GND 12 D901 D805 J035 FET2 G D1665 D1664 Q1500 J055 J053 D640 R924 C920 C910 R802 Q801 C806 R217 2 C921 D806 5 R923 C918 R920 1 C803 GND J082 D907 R932 C810 R803 C818 J084 GND R815 R840 1 D905 R919 Q905 D807 J072 R903 J086 FB V D1406 GND R690 D904 IC902 8 R921 C817 R814 R813 R841 R173 GND R911 R910 GND P-ON+9V J078 SP-GND J076 SP-GND C912 C903 R926 J081 J080 GND R216 R943 C927 R939 R938 R940 CN901 J090 GND J088 C914 C809 R171 CN702 J083 GND C838 R651 J112 D642 1 25 C831 J089 GND C816 R220 R905 2 R811 R810 C834 C204 R215 GND 26 R1508 D1555 GND FET1 G P-ON+5.0V Q636 Q634 for All+3.3V 4 C915 R909 C832 R832 C828 Q172 C830 R834 R833 29 C911 28 ALL+3.3V J091 L804 J094 Q1009 J046 D1402 8 R665 J123 D650 R904 D413 8 ALL+3.3V J087 P-ON-H1-SW P-ON+9V J085 R221 Q206 JS103 9 FET1 S Q1006 J048 Q637 C649 D649 P-ON+5V C913 J100 M+10V R222 J103 C908 C909 IC803 R174 D407 C223 J101 P-ON+5V J107 5 C206 J106 C222 R825 C826 R175 D412 D204 D203 R1022 J056 Q1008 BC1001 R1072 DRIVE+12.5V J059 ALL+3.3V R219 R235 R826 R831 Q171 JS101 DVD-LED 1 R2 01 for RESET J217 Q205 J098 GND R254 R830 C829 R823 P-ON-H2 R253 C205 J111 J108 DVD-MAIN-PWR R223 R838 R821 R837 R836 R172 J110 GND D415 4 DVD-LED D207 C207 R824 R822 R678 D406 LCD+12.5V C833 R244 R664 C647 Q1005 D1552 FET1 D C1503 R1071 Q1003 J104 Q211 R407 R406 R408 GND J093 1 C825 D1045 R245 D657 C827 Q1011 D1003 1 C1013 Q215 INV.+31V J096 from P-ON-H2 J097 from P-ON-H2 GND J126 GND R240 R239 C225 J125 R238 C224 R237 J128 2 S-SW J115 C201 D671 R241 D208 J136 J137 J138 J139 J140 J145 -7.5V J122 JS1005 D1560 R1557 D1504 R1019 R1017 D211 R250 ALL+3.3V J118 JS633 +12.5V D660 J142 R679 J121 C656 R204 D417 Q210 Q402 R1004 R1002 J174 GND J158 J143 GND R236 RCV-IN ALL+3.3V P-ON+3.3V GND J144 for RESET J092 J130 J129 JS102 SP-GND LED-R AMP-R AMP-L J127 KEY-IN1 P-ON-H1 J134 DVD-Pb LED1 PROTECT1 28 J141 DVD-Y LCD+12.5V J058 GND D1006 C1018 C1014 D1010 P-ON+3.3V SW D405 PROTECT2 D418 LCD SW J153 GND C1006 D1404 J205 J061 16 IC1001 R1049 D210 R207 J157 LCD+12.5V J146 from P-ON-H2 R1050 J178 GND R208 D201 J159 J151 R648 J131 D803 R680 J057 GND CN303 29 J147 J164 LCD+12.5V Q201 CN201 1 D1007 JS1002 J166 Q632 P-ON+5.0V J188 C210 C211 C212 C213 R252 LCD SW REF JS1001 53 R1507 D1004 Q1001 D1005 C15 R1506 2 C1003 C1402 GND D403 R677 2 1 IF-AGC R214 R405 J160 D212 LCD SW J162 J161 J170 J154 J150 J152 SDA D301 Q203 R412 R303 R302 J168 CN302 J155 SCL D302 GND C208 D202 Q202 R212 GND J165 C220 C227 C226 R242 R227 R211 D411 J167 PROTECT2 ALL+3.3V VGL-5.5V J184 DRIVE+12.5V J183 PROTECT3 J181 BL-ADJ. C209 R213 R1006 R232 Q209 J635 J634 C214 BC301 C302 JS303 R313 C309 C315 C314 JS301 JS805 J175 J176 JS804 JS801 JS802 for A JS310 DIF - 28 29 from P-ON-H2 J169 J149 A-MUTE R225 R224 J190 J173 PROTECT1 TU+5.0V J191 VCOM J185 BL-SW 8 C217 GND R1007 R234 5 C1554 Q1551 10 11 J192 LCD+12.5V J197 L301 TUNER S A P-ON+3.3V C215 R233 GND J177 VGH+25.6V D1401 Q1002 J194 VCOM-PWM J179 PANEL+24.5V J208 GND 4 IC201 1 C303 VGL-5.5V R411 J212 GND C216 R230 R231 R699 D408 J206 R228 Q208 GND J180 D303 J171 TU+5V TU301 TU302 AMP-L-HP R226 J182 P-ON 3.3V WF1 PIN 4 OF CN302 J216 P-ON+3.3V Q207 J189 GND P-ON-H1 WF3 PIN 6 OF CN302 D409 D410 R698 +3.5Vfor1.8V J202 J203 J198 J199 J209 D404 J187 GND WF2 PIN 8 OF CN302 4A/125V J196 +7.0Vfor1.0V J201 P-ON+5.0V GND GND GND RCV-IN J207 J210 C306 C305 J186 J117 2 WF7 PIN 13 OF CN302 CAUTION ! : For continued protection against risk of fire, replace only with same type 4 A, 125V fuse. ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V. R229 TU+5V JS306 P-ON+3.3V LED1 J195 GND D304 R304 R307 R305 R306 JS304 L303 C682 L302 32V-A JS305 JS309 for S DIF + 1 GND 5V-A C311 C310 GND CN301 J172 32V-S JS308 ALL+3.3V J215 C681 J200 GND J204 J193 JS307 5V-S JS803 WF4 PIN 15 OF CN302 7.0Vfor1.0V P-ON+5.0V WF5 PIN 17 OF CN302 GND J214 GND C684 C683 28 29 WF6 PIN 19 OF CN302 Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required. D808 CN872 C D 10-18 B A COLD BA017GF01014 Jack CBA, Function CBA, Junction-A CBA, Junction-B CBA & Junction-C CBA Top View [LC220SS1, 22MF330B/F7, LC220EM1(Serial No.:DS1A,DS2A,TH1A), LC220SL1(Serial No.:DS1A,DS2A,TH1A)] Junction-A CBA Function CBA Junction-B CBA POW. CL862 C7A3 A3 b ST.BY D103 P DVD D950 /GREEN P PATTERN SW955 /RED CN862B /ORANGE CL861 D952 C108 J901 RCV-IN SW954 AGING R951 D104 R954 C951 D951 C109 R116 D105 CN101B CN101A R106 R950 RS101 B b b BA94N0F0102 2 CN861B P LC7 19/22W BASE Junction-C CBA SW109 POWER SW951 PLAY STOP SW952 SW953 EJECT SW108 CH.UP SW107 CH.DOWN MENU SW106 VOL.UP SW105 SW104 VOL.DOWN CN101 J803 GND JACK CBA C103 J810 P-ON+9V JK751 R757 JK841 R758 JK711 JK741 JK721 JK752 R774 R775 P-ON+9V J807 COM-Y J809 2 1 BA94N0F0102 JK731 J818 SPDIF R756 Q841 J813 PC-AUDIO-L R763 28 29 J822 GND V-R J812 V-R BC771 R782 D706 Q771 R851 C7A3 A3 L852 AMP-R-SP J805 J804 HP-GND A J806 1 BA94N0F0102 2 J808 HP-GND R852 AMP-L-HP C771 L851 CN871 J816 GND D709 4 2 J802 SP-L-GND J821 L853 CN861A AMP-L-SP Q722 L854 Q773 R788 D705 1 J820 GND JK851 R789 J801 TOOL NO. 1 2 3 4 5 6 7 8 9 10 JK754 JK733 2 J815 PC AUDIO-L J817 Q774 JK753 JK742 JK722 J814 GND JK732 J811 SEL-R CN701 J819 10-19 BA94N0F01022 Jack CBA, Function CBA, Junction-A CBA, Junction-B CBA & Junction-C CBA Bottom View [LC220SS1, 22MF330B/F7, LC220EM1(Serial No.:DS1A,DS2A,TH1A), LC220SL1(Serial No.:DS1A,DS2A,TH1A)] Junction-C CBA Junction-A CBA Function CBA C105 C110 JK741 C841 C731 R 8 4 3R 7 3 1 C845 R775 R718 JK721 R792 R717 J813 C757 PC-AUDIO-L R774 R785 C753 R795 J809 R763 JK722 JK754 R755 V-R J812 R793 R732 R733 JK742 CN701 R747 R721 V-R J811 SEL-R J819 R787 C743 JS701 R741 C732 JK732 R794 C773 R735C735 C723 R727 R764 GND J814 R754 C736 R742 GND J822 D704 C724 R722 R786 JK733 R736 R783 R797 R777 IC771 R773 Q771 R796 J820 GND R779 C775 R772 Q773 CN861A 9 Q722 8 D710 C771 R778 J816 GND L853 L851 R776 C776 J821 J801 AMP-L-SP J802 SP-L-GND R852 C861 CN871 L854 16 1 D703 Q774 C733 D701 C744 R784 R748 C772 J808 HP-GND J806 HP-GND C852 AMP-L-HP C851 R782 D705 R788 R780 D702 J817 D706 JK851 D707 R789 D708R791 R790 J815 PC AUDIO-L BC771 R781 2 R728 10-20 CN101A CN101 C734 R848 C704 C703 R851 CN101B J901 RCV-IN R734 R844 BA94N0F0102 R712 R711 R753 COM-Y J807 JK751 R752 JK752 JK731 C756 JK711 J818 SPDIF P-ON+9V C755 Q841 JK841 C752 R751 BC841 C842 R847 R845 R846 J810 C843 P-ON+9V R757 R758 C751 C758 SW104 VOL.DOWN VOL.UP SW105 C754 JK753 R111 J803 GND SW108 CH.UP SW107 CH.DOWN MENU SW106 R112 R756 JACK CBA R116 R956 D105 D952 D951 C109 R115 R114 SW951 PLAY STOP SW952 R118 R113 C951 R955 R953 R954 D104 C103 SW109 POWER C950 R950 R106 R951 R952 L852 AMP-R-SP J805 J804 CL861 CL862 P C111 PATTERN SW955 DVD D950 ST.BY D103 SW953 EJECT CN861B CN862B POW. C104 SW954 AGING C106 R108 R107 D709 C107 R109 C108 D101 R S 1 0 1R 1 1 0 P b Junction-B CBA BA94N0F01022 b P b Jack CBA & Function CBA Top View [LC220EM1(Serial No.:TH2A), LC220SL1(Serial No.:TH2A)] Function CBA Not Used Not Used /GREEN POW. CL862 C7A3 A3 b ST.BY D103 P DVD D950 /RED P PATTERN SW955 /ORANGE CN862B D952 C108 CN101B J901 RCV-IN CN101A R106 R950 RS101 B CL861 b BA01NDF0102 2 b P LC8 19/22W BASE CN861B Not Used SW954 AGING R951 D104 R954 C951 D951 C109 R116 D105 C103 SW109 POWER SW951 PLAY STOP SW952 SW953 EJECT SW108 CH.UP SW107 CH.DOWN MENU SW106 VOL.UP SW105 SW104 VOL.DOWN CN101 J803 GND JACK CBA J810 P-ON+9V R757 R774 R775 JK721 / WHITE R763 J819 JK753 J814 V-R V-R / RED / RED / RED JK733 J815 BC771 2 TOOL NO. A B C D E F G H I J JK754 / RED 28 29 JK722 GND J812 J817 Q774 J813 PC-AUDIO-L / WHITE / / WHITE BLUE JK732 J811 SEL-R CN701 GND JK711 / JK752 YELLOW COM-Y JK741 JK742 J822 R758 / ORANGE / GREEN J807 P-ON+9V BA01NDF0102 J809 2 1 JK731 JK841 JK751 J818 SPDIF R756 Q841 PC AUDIO-L R782 R789 C7A3 R851 L852 AMP-R-SP J805 J804 HP-GND J808 HP-GND L851 L853 CN871 J816 GND C771 J806 J821 D709 4 2 J802 SP-L-GND AMP-L-HP CN861A J801 AMP-L-SP Q722 L854 Q773 R788 D705 1 J820 GND JK851 D706 Q771 R852 A A3 1 BA01NDF0102 2 10-21 BA01NDF01022 Jack CBA & Function CBA Bottom View [LC220EM1(Serial No.:TH2A), LC220SL1(Serial No.:TH2A)] Not Used Function CBA Not Used C110 D951 C109 J803 GND C755 Q841 R753 C841 JK741 C731 R843 R731 C845 J809 R763 JK722 JK754 V-R J812 R755 R786 R732 R733 JK742 C736 R742 GND D704 C724 CN701 JK732 R793 J811 SEL-R JS701 R741 C732 R747 R721 V-R JK753 C743 R794 J819 R787 C773 R735 C735 C723 R727 R764 GND J814 R754 J822 R722 R736 R781 16 IC771 D706 D705 R772 Q773 D710 C771 R778 CN861A C772 J816 GND L853 L851 R796 J820 GND R779 C775 C776 J801 AMP-L-SP J802 SP-L-GND R852 C861 10-22 CN871 8 L854 R777 R773 J821 J808 HP-GND R797 Q771 Q722 C733 D701 R784 R748 2 R790 1 D703 R776 AMP-L-HP J806 HP-GND AMP-R-SP J805 J804 C852 Q774 R782 C744 9 JK851 J817 R788 C851 R780 D702 BC771 R783 J815 D708 R791 PC AUDIO-L D707 R789 JK733 R728 R851 R775 R718 JK721 R792 R717 J813 C757 PC-AUDIO-L R774 JK752 R785 R795 C758 C734 R848 C704 C703 C753 R734 R844 BA01NDF0102 R712 R711 COM-Y R752 J807 C756 P-ON+9V JK841 JK711 R751 J818 SPDIF R757 R758 C752 JK731 JK751 JACK CBA BC841 C842 R845 J810 P-ON+9V R847 R846 C843 R756 C751 SW104 VOL.DOWN R111 VOL.UP SW105 SW107 CH.DOWN MENU SW106 SW108 CH.UP C754 CN101 R112 R114 SW951 PLAY STOP SW952 C951 R956 CN101B D952 R118 R113 R115 J901 RCV-IN R955 R953 R954 D104 C103 SW109 POWER C950 R950 R106 R951 R952 L852 CL861 CL862 P C111 PATTERN SW955 DVD D950 ST.BY D103 SW953 EJECT CN861B CN862B POW. C104 R116 R107 SW954 AGING C106 R108 CN101A C105 D105 R109 D709 C107 C108 D101 RS101 R110 P b Not Used BA01NDF01022 b P b WAVEFORMS WF1 ~ WF7 = Waveforms to be observed at Waveform check points. (Shown in Schematic Diagram.) Input: NTSC Color Bar Signal (with 1kHz Audio Signal) WF1 Pin 4 of CN302 CVBS WF2 0.2V WF6 20µs 0.2V 20µs AUDIO 0.2V 20µs Pin 19 of CN302 VIDEO-Pr WF7 0.2V Pin 17 of CN302 VIDEO-Pb Pin 6 of CN302 S-VIDEO-C WF4 20µs Pin 8 of CN302 S-VIDEO-Y WF3 WF5 0.2V 20µs Pin 13 of CN302 0.1V 0.5ms Pin 15 of CN302 VIDEO-Y 0.2V 20µs 11-1 LC8NWF CN3701 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN3702 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CL3701 P-ON-H2 AUDIO(L)-OUT(NU) GND AUDIO(R)-OUT(NU) PROTECT3 AMP(L)-OUT GND AMP(R)-OUT P-ON-H1 P-ON+3V PROTECT1 GND LED-R P-ON+5V PROTECT2 P-ON+7V GND GND P-ON+3.3V P-ON+3.3V AL+3.3V AL+3.3V GND OE2 REMOTE BACKLIGHT-SW LED1 BACKLIGHT-ADJ VCOM-PWM CL3702 GND SPDIF GND VIDEO-IN S-VIDEO-SW S-VIDEO-C-IN GND S-VIDEO-Y-IN GND INPUT1 AUDIO(R) INPUT0 AUDIO(L) GND COM-VIDEO-Y-IN GND COM-VIDEO-Pb-IN GND COM-VIDEO-Pr-IN AUDIO-MUTE SDA SCL RESET IF-AGC GND DIF-OUT1 GND DIF-OUT2 KEY-IN1 CN301 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN302 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN102 1 2 3 4 5 6 7 8 CN801A 1 2 3 4 GND REMOTE AL+3.3V LED1 P-ON-H1 KEY-IN1 KEY-IN2 DVD-LED SP(R) SP(R) SP-GND SP-GND CL862 SP(R) SP-GND CN101A 1 2 3 4 5 6 7 8 JUNCTION-A CBA CN101 1 2 3 4 5 6 7 8 1 2 FUNCTION CBA CN101B 1 2 3 4 5 6 7 8 SP862 SPEAKER R-CH TUNER UNIT CL101 GND REMOTE AL+3.3V LED1 P-ON-H1 KEY-IN1 KEY-IN2 DVD-LED JUNCTION-B CBA CN862B 1 2 3 4 MAIN CBA AC601 AC CORD DIGITAL MAIN CBA UNIT CN702 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN201 1 2 3 4 5 6 7 8 9 10 11 CL201 GND PANEL+13V PANEL+13V PANEL+24.5V GND PANEL+3.3V PANEL+3.3V PANEL-7.1V GND VCOM GND 12-1 JACK CL701 CN701 SP(R) 1 SP(R) 2 HEADPHONE(R) 3 HEADPHONE(R) 4 GND 5 6 GND 7 GND 8 GND HEADPHONE(L) 9 HEADPHONE(L) 10 11 GND 12 GND 13 AUDIO(L) 14 P-ON+9V 15 AUDIO(R) COM-VIDEO-Pr-IN 16 17 GND COM-VIDEO-Pb-IN 18 19 S-VIDEO-SW COM-VIDEO-Y-IN 20 21 GND 22 INPUT0 23 SPDIF 24 INPUT1 25 GND S-VIDEO-Y-IN 26 27 VIDEO-IN S-VIDEO-C-IN 28 29 GND CN861A 1 2 3 4 CBA LCD MODULE ASSEMBLY BACK LIGHT BACK LIGHT CN1650 1 2 CN1750 1 2 BACK LIGHT CN1550 1 2 CN3902 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 SP(L) SP(L) SP-GND SP-GND DIGITAL AUDIO-OUT (COAXIAL) S-VIDEO -IN PC-AUDIO -IN AUDIO(R) -IN AUDIO(L) -IN VIDEO-IN HDMIAUDIO(R)-IN HDMIAUDIO(L)-IN CL861 SP(L) SP-GND 1 2 HDMICONNECTOR-2 HDMICONNECTOR-1 PC-RGB-IN JUNCTION-C CBA CN861B 1 2 3 4 COMPONENTAUDIO(R)-IN COMPONENTAUDIO(L)-IN COMPONENT -Pr-IN COMPONENT -Pb-IN COMPONENT -Y-IN CL3902 STV XAO OE1 CPV POL TP GND LLV5(-) LLV5(+) LLV4(-) LLV4(+) LLV3(-) LLV3(+) GND LLVCLK(-) LLVCLK(+) GND LLV2(-) LLN2(+) LLV1(-) LLV1(+) LLV0(-) LLV0(+) GND SP861 SPEAKER L-CH [LC220SS1, 22MF330B/F7, LC220EM1(Serial No.:DS1A,DS2A,TH1A), LC220SL1(Serial No.:DS1A,DS2A,TH1A)] WIRING DIAGRAM FL10.1WI CL3701 P-ON-H2 AUDIO(L)-OUT(NU) GND AUDIO(R)-OUT(NU) PROTECT3 AMP(L)-OUT GND AMP(R)-OUT P-ON-H1 P-ON+3V PROTECT1 GND LED-R P-ON+5V PROTECT2 P-ON+7V GND GND P-ON+3.3V P-ON+3.3V AL+3.3V AL+3.3V GND OE2 REMOTE BACKLIGHT-SW LED1 BACKLIGHT-ADJ VCOM-PWM CL3702 GND SPDIF GND VIDEO-IN S-VIDEO-SW S-VIDEO-C-IN GND S-VIDEO-Y-IN GND INPUT1 AUDIO(R) INPUT0 AUDIO(L) GND COM-VIDEO-Y-IN GND COM-VIDEO-Pb-IN GND COM-VIDEO-Pr-IN AUDIO-MUTE SDA SCL RESET IF-AGC GND DIF-OUT1 GND DIF-OUT2 KEY-IN1 CN301 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN302 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN3702 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN3701 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 SP(R) SP-GND CL101 GND REMOTE AL+3.3V LED1 P-ON-H1 KEY-IN1 KEY-IN2 DVD-LED CN872 1 2 CN102 1 2 3 4 5 6 7 8 FUNCTION CBA CN101B 1 2 3 4 5 6 7 8 CL862 MAIN CBA SP862 SPEAKER R-CH TUNER UNIT AC601 AC CORD DIGITAL MAIN CBA UNIT CN702 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 CN201 1 2 3 4 5 6 7 8 9 10 11 CL201 GND PANEL+13V PANEL+13V PANEL+24.5V GND PANEL+3.3V PANEL+3.3V PANEL-7.1V GND VCOM GND 12-2 JACK CBA CL701 CN701 SP(R) 1 SP(R) 2 HEADPHONE(R) 3 HEADPHONE(R) 4 GND 5 6 GND 7 GND 8 GND HEADPHONE(L) 9 HEADPHONE(L) 10 11 GND 12 GND 13 AUDIO(L) 14 P-ON+9V 15 AUDIO(R) COM-VIDEO-Pr-IN 16 17 GND COM-VIDEO-Pb-IN 18 19 S-VIDEO-SW COM-VIDEO-Y-IN 20 21 GND 22 INPUT0 23 SPDIF 24 INPUT1 25 GND S-VIDEO-Y-IN 26 27 VIDEO-IN S-VIDEO-C-IN 28 29 GND CN871 1 2 LCD MODULE ASSEMBLY BACK LIGHT BACK LIGHT CN1650 1 2 CN1750 1 2 BACK LIGHT CN1550 1 2 SP(L) SP-GND DIGITAL AUDIO-OUT (COAXIAL) S-VIDEO -IN PC-AUDIO -IN AUDIO(R) -IN AUDIO(L) -IN VIDEO-IN HDMIAUDIO(R)-IN HDMIAUDIO(L)-IN COMPONENTAUDIO(R)-IN COMPONENTAUDIO(L)-IN COMPONENT -Pr-IN COMPONENT -Pb-IN CL861 CN3902 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 COMPONENT -Y-IN CL3902 STV XAO OE1 CPV POL TP GND LLV5(-) LLV5(+) LLV4(-) LLV4(+) LLV3(-) LLV3(+) GND LLVCLK(-) LLVCLK(+) GND LLV2(-) LLN2(+) LLV1(-) LLV1(+) LLV0(-) LLV0(+) GND SP861 SPEAKER L-CH HDMICONNECTOR-2 HDMICONNECTOR-1 PC-RGB-IN [LC220EM1(Serial No.:TH2A), LC220SL1(Serial No.:TH2A)] FL10.1WI_2 EXPLODED VIEWS Cabinet [LC220SS1, 22MF330B/F7, LC220EM1 (Serial No. : DS1A, DS2A, TH1A), LC220SL1 (Serial No. : DS1A, DS2A, TH1A)] A14 LC220SS1, 22MF330B/F7 A1 L12 B1 L12 CL3701 L3 CL3702 LC220EM1, LC220SL1 L4 L12 L3 A14 CL3902 Junction-A CBA A5 B7 B44 B7 Digital Main CBA Unit A10 L3 CL201 L4 L11 L3 L1 CL701 L1 SP861 A9 L1 Jack CBA L3 L2 Function CBA A3 Junction-B CBA SP862 B8 L8 B8 L3 A4 B3 Junction-C CBA L2 L3 L1 L8 L5 B3 L9 L3 LCD1 L1 B14 L9 L3 B13 S5 L1 B2 L4 L13 Main CBA L1 L3 A8 L3 AC601 See Electrical Parts List for parts with this mark. L5 L1 L9 L1 S5 A6 L1 Stand Assembly L17 13-1 FL10.1CEX Cabinet [LC220EM1 (Serial No. : TH2A), LC220SL1 (Serial No. : TH2A)] A1 L12 B1 L12 CL3701 L3 CL3702 L4 L12 L3 A14 B7 B44 B7 CL3902 Digital Main CBA Unit A5 A10 L3 CL201 L4 L11 L3 L1 CL701 L1 SP861 A9 L1 Jack CBA Function CBA CL861 A3 L8 L3 L2 L3 B8 A4 B3 SP862 CL862 B8 L2 L3 L1 L8 L5 B3 L9 L3 LCD1 L1 B14 L9 L3 B13 S5 L1 B2 L4 L13 Main CBA L1 L3 A8 L3 AC601 See Electrical Parts List for parts with this mark. L5 L1 L9 L1 S5 A6 L1 Stand Assembly L17 13-2 A017GCEX Packing L17 Tape Stand Assembly X3 S6 X4 X2 X8 X6 S2 Packing Tape X1 S4 Packing Tape Tape Packing Tape S3 FR ON T S3 S5 FR ON T Some Ref. Numbers are not in sequence. Packing Tape S1 13-3 FL10.1PEX PARTS LIST [LC220SS1] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. Ref. No. X3 Description REMOTE CONTROL NH200UD Part No. NH200UD X4 DRY BATTERY R03/2S XB0M451T0006 X6 QUICK START GUIDE A01N1UH 1EMN26265 X8 CHILD SAFETY SHEET A94F1UH 1EMN24522 NOTE: Parts that are not assigned part numbers (---------) are not available. Ref. No. Description STAND ASSEMBLY A0171UH Part No. 1ESA23233 A1 FRONT CABINET A9171UH 1EM123313 A3 CONTROL PLATE A91N0UH 1EM325762 A4 REAR CABINET A0170UH 1EM124415 A5 DECORATION PLATE A0171UH 1EM224083 A6# RATING LABEL A0171UH ---------- A8 JACK LABEL A9DN0UH 1EM430877 A9 JACK HOLDER(A) A94N0UH 1EM222783 A10 JACK HOLDER(D) A94N0UH 1EM222784 A14 POP LABEL A0170UH ---------- B1 SHIELD BOX A01F2UH 1EM224323 B2 STAND HOLDER A9170UH 1EM325637 B3 WALL MOUNT BRACKET A84N0UH 1EM323797 B7 GASKET A8AF0UH 1EM425861 B8 SPEAKER HOLDER A94N0UH 1EM325677 B44 THERMOSTAR TMS-L-2(12*12HC) XK10000X4003 CL201 WIRE ASSEMBLY 11PIN FFC 11PIN 90MM WX1A9170-107 CL701 WIRE ASSEMBLY 29PIN FFC 29PIN 50MM WX1A94F0-101 CL3701 WIRE ASSEMBLY 29PIN FFC 29PIN 50MM WX1A94F0-101 CL3702 WIRE ASSEMBLY 29PIN FFC 29PIN 70MM WX1A94F0-111 CL3902 WIRE ASSEMBLY 24PIN FFC 24PIN 80MM WX1A9170-101 L1 SCREW P-TIGHT 3X10 BIND HEAD+ GBHP3100 L2 SCREW P-TIGHT M3X8 BIND HEAD+ GBJP3080 L3 SCREW S-TIGHT M3X6 BIND HEAD+ GBJS3060 L4 SCREW S-TIGHT M3X8 BIND HEAD+ GBHS3080 L5 SCREW TAP TIGHT M3X10 BIND HEAD+BLK NI GBHS3100 L8 ASSEMBLED SCREW M3X10 1EM420633A L9 DOUBLE SEMS SCREW M4X10 + BLK FPH34100 L11 HEX SCREW #4-40 7MM 1EM430139 L12 ASSEMBLED SCREW ( D9 M3X6 ) A71F0UH 1EM424392B L17 STAND SCREW KIT A01N0UH 1ESA23632 LCD1 LCD MODULE 6BIT NORMAL GRADE UJ22MXA SP861 SPEAKER S0307F03 DS08070XQ001 SP862 SPEAKER S0307F03 DS08070XQ001 PACKING S1 CARTON A0171UH 1EM431118 S2 STYROFOAM TOP A9170UH 1EM023471 S3 STYROFOAM BOTTOM A9170UH 1EM023472 S4 SET BAG A81N0UH 1EM323958 S5 SERIAL NO. LABEL A01PBUH ---------- S6 STAND BAG A81N0UH 1EM425888 ACCESSORIES X1 BAG POLYETHYLENE 235X365XT0.03 0EM408420A X2# OWNERS MANUAL A01N1UH/A0171UH 1EMN26204 20100316 14-1 A0171CA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. Ref. No. C633 NOTES: 1. Parts that are not assigned part numbers (---------) are not available. 2. Tolerance of Capacitors and Resistors are noted with the following symbols. Description CERAMIC CAP. B K 1500pF/1KV Part No. CCD3AKN0B152 C636# ELECTROLYTIC CAP. 100µF/25V M CE1EMASDL101 C638 CAP ALUMINUM ELECTOLYTIC 2200µF/6.3V M CE0KMZNDL222 C639 CAP ALUMINUM ELECTOLYTIC 2200µF/6.3V M CE0KMZNDL222 C641 ELECTROLYTIC CAP 3300µF/10V CE1AMZNDL332 C643 ELECTROLYTIC CAP. 1000µF/25V M CE1EMZNDL102 C645 POLYESTER FILM CAP. (PB FREE) 0.0022µF/ 100V J CA2A222DT018 C647 ELECTROLYTIC CAP. 100µF/10V M H7 CE1AMAVSL101 C649 ELECTROLYTIC CAP. 220µF/10V M H7 CE1AMAVSL221 C650 ELECTROLYTIC CAP. 220µF/10V M CE1AMASDL221 C652 ELECTROLYTIC CAP. 1000µF/6.3V M CE0KMASDL102 C653 ELECTROLYTIC CAP. 22µF/50V M CE1JMASDL220 CE1CMASDL101 C.....±0.25% D.....±0.5% F.....±1% G.....±2% J......±5% K.....±10% C654 ELECTROLYTIC CAP. 100µF/16V M C656 ELECTROLYTIC CAP. 100µF/25V M CE1EMASDL101 M.....±20% N.....±30% Z.....+80/-20% C660 ELECTROLYTIC CAP. 3.3µF/50V M CE1JMASDL3R3 C691# CAP CERAMIC 4700pF/250V/M/KX CA2E472MR101 C692# SAFTY CAP. 1000pF/250V KX CA2E102MR101 C805 ELECTROLYTIC CAP. 330µF/25V M CE1EMASDL331 C806 ELECTROLYTIC CAP. 330µF/25V M CE1EMASDL331 C809 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 C810 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 C811 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C812 ELECTROLYTIC CAP. 470µF/25V M CE1EMASDL471 C813 ELECTROLYTIC CAP. 100µF/25V M CE1EMASDL101 C816 CHIP CERAMIC CAP.(1608) CH J 1000pF/50V CHD1JJ3CH102 C817 CHIP CERAMIC CAP.(1608) CH J 1000pF/50V CHD1JJ3CH102 C825 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 C826 CHIP CERAMIC CAP.(1608) CH J 390pF/50V CHD1JJ3CH391 DIGITAL MAIN CBA UNIT Ref. No. Description DIGITAL MAIN CBA UNIT Part No. A0171MMA-001 MAIN CBA Ref. No. Description MAIN CBA Consists of the following: Part No. A0170MPWA001 CAPACITORS C201 ELECTROLYTIC CAP. 470µF/25V M CE1EMASDL471 C202 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 C827 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 C204 ELECTROLYTIC CAP. 10µF/50V M H7 CE1JMAVSL100 C828 CHIP CERAMIC CAP.(1608) CH J 390pF/50V CHD1JJ3CH391 C207 ELECTROLYTIC CAP. 22µF/50V M H7 CE1JMAVSL220 C829 CHIP CERAMIC CAP. CH J 820pF/50V CHD1JJ3CH821 C208 ELECTROLYTIC CAP. 47µF/25V M CE1EMASDL470 C830 CAP CERAMIC (AX) 820pF/50V/B/K CA1J821TU061 C209 ELECTROLYTIC CAP. 47µF/16V M H7 CE1CMAVSL470 C831 ELECTROLYTIC CAP. 100µF/16V M CE1CMASDL101 C214 CHIP CERAMIC CAP.(1608) CH J 1000pF/50V CHD1JJ3CH102 C832 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C215 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C838 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 C216 CHIP CERAMIC CAP. (1608) B K 1µF/16V CHD1CK30B105 C1003 ELECTROLYTIC CAP. 100µF/25V M CE1EMASDL101 C217 ELECTROLYTIC CAP. 47µF/25V M CE1EMASDL470 C1004 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C302 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C1005 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C303 ELECTROLYTIC CAP. 220µF/10V M CE1AMASDL221 C1006 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 C305 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C1007 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 C306 ELECTROLYTIC CAP. 1µF/50V M CE1JMASDL1R0 C1008 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 C309 CHIP CERAMIC CAP.(1608) CH J 1000pF/50V CHD1JJ3CH102 C1009 CHIP CERAMIC CAP. B K 470pF/50V CHD1JK30B471 C310 CHIP CERAMIC CAP.(1608) CH J 47pF/50V CHD1JJ3CH470 C1010 CHIP CERAMIC CAP. B K 470pF/50V CHD1JK30B471 C311 CHIP CERAMIC CAP.(1608) CH J 47pF/50V CHD1JJ3CH470 C1012 CT1J474DT040 C401 ELECTROLYTIC CAP. 1µF/50V M CE1JMASDL1R0 METALIZED POLYESTER FILM CAP. 0.47µF/ 50V J C601# CAP METALIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004 C1013 POLYESTER FILM CAP. (PB FREE) 0.0039µF/ 100V J CA2A392DT018 C602 ELECTROLYTIC CAP 47µF/200V M CE2DMZNDL470 C603 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C604 POLYESTER FILM CAP. (PB FREE) 0.039µF/ 100V J CA2A393DT018 C605 C1014 ELECTROLYTIC CAP. 47µF/25V M CE1EMASDL470 C1015 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C1016 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C1017 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C1018 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 CHD1JK30B104 POLYESTER FILM CAP. (PB FREE) 0.0012µF/ 100V J CA2A122DT018 C606 CERAMIC CAP. 820pF/2KV CA3D821PAN04 C1019 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V C607 POLYESTER FILM CAP. (PB FREE) 0.082µF/ 100V J CA2A823DT018 C1020 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 C1021 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C608 POLYESTER FILM CAP. (PB FREE) 0.001µF/ 100V J CA2A102DT018 C1401 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C631 ELECTROLYTIC CAP. 470µF/25V M CE1EMASDL471 C1403 ELECTROLYTIC CAP. 10µF/50V M H7 CE1JMAVSL100 CE1GMZADL102 C1404 ELECTROLYTIC CAP. 10µF/50V M H7 CE1JMAVSL100 C632 ELECTROLYTIC CAP. 1000µF/35V M 20100316 14-2 A0171EL Ref. No. Description Part No. Ref. No. Description Part No. C1500 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 D401 DIODE FR104-B NDLZ000FR104 C1501 ELECTROLYTIC CAP. 470µF/35V M CE1GMZNDL471 D402 DIODE ZENER 10BSB-T26 NDTB010BST26 C1502 CERAMIC CAP. B K 2200pF/500V CCD2JKS0B222 D404 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1503 CERAMIC CAP. B K 2200pF/500V CCD2JKS0B222 D405 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1550 CAP CERAMIC HV 15pF/6.3KV/SL/J CCA1500MR001 D406 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1551 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D407 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1552 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D408 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1553 CAP CERAMIC HV 15pF/6.3KV/SL/J CCA1500MR001 D409 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1554 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 D410 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1555 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 D411 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1556 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 D412 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1557 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 D413 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1558 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 D414 DIODE ZENER 6V2BSB-T26 NDTB6R2BST26 C1600 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 D416 DIODE ZENER 10BSB-T26 NDTB010BST26 C1601 ELECTROLYTIC CAP. 470µF/35V M CE1GMZNDL471 D417 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1602 CERAMIC CAP. B K 2200pF/500V CCD2JKS0B222 D418 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1603 CERAMIC CAP. B K 2200pF/500V CCD2JKS0B222 D601# DIODE 1N5397BD NDL1001N5397 C1650 CAP CERAMIC HV 15pF/6.3KV/SL/J CCA1500MR001 D602# DIODE 1N5397BD NDL1001N5397 C1651 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D603# DIODE 1N5397BD NDL1001N5397 C1652 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D604# DIODE 1N5397BD NDL1001N5397 C1653 CAP CERAMIC HV 15pF/6.3KV/SL/J CCA1500MR001 D605 DIODE ZENER 4V3BSB-T26 NDTB4R3BST26 C1657 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 D606# DIODE ZENER 27BSB-T26 NDTB027BST26 C1658 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 D607# DIODE ZENER 39BSB-T26 NDTB039BST26 C1659 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 D608# SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1660 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 D610 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1661 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 D612 DIODE ZENER 1ZB220-YBB NDWZ01ZB220Y C1700 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 D631 DIODE SCHOTTKY SB2A0BD NDWZ000SB2A0 C1701 ELECTROLYTIC CAP. 470µF/35V M CE1GMZNDL471 D632 DIODE SHOTTKY SB3200BR NDWZ3200D027 C1702 CERAMIC CAP. B K 2200pF/500V CCD2JKS0B222 D633# DIODE ZENER 1ZB43BB NDWZ0001ZB43 C1703 CERAMIC CAP. B K 2200pF/500V CCD2JKS0B222 D635 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1750 CAP CERAMIC HV 15pF/6.3KV/SL/J CCA1500MR001 D636 DIODE FR104-B NDLZ000FR104 C1751 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D637# DIODE ZENER 36BSB-T26 NDTB036BST26 C1752 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D638 SCHOTTKY BARRIER DIODE SB240-B/P NDWZ000SB240 C1753 CAP CERAMIC HV 15pF/6.3KV/SL/J CCA1500MR001 D639 DIODE FAST RECOVERY FR151-B/P NDWZ0FR151BP C1754 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 D641 DIODE SCHOTTKY SB360BH NDWZ000SB360 C1755 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 D642 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1756 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 D643 FAST RECOVERY DIODE FR252 NDWZ000FR252 C1757 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 D645 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1758 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 D646 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D648 DIODE ZENER HZS5.6NB2TE-EQ QDTB0HZS5R6N CONNECTORS CN102 242 SERIES CONNECTOR 224202108W1 J322C08TG001 D649# DIODE ZENER 3V3BSB-T26 NDTB3R3BST26 CN201 FFC CONNECTOR IMSA-9615S-11A-PP-A JC96J11ER007 D650 DIODE ZENER 6V8BSA-T26 NDTA6R8BST26 CN301 FFC CONNECTOR IMSA-9615S-29A-PP-A JC96J29ER007 D651 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 CN302 FFC CONNECTOR IMSA-9615S-29A-PP-A JC96J29ER007 D653 DIODE SHOTTKY SB3200BR NDWZ3200D027 CN702 FFC CONNECTOR IMSA-9615S-29A-PP-A JC96J29ER007 D654 DIODE FR154BD NDL1000FR154 CN801A 242 SERIES CONNECTOR 224202104W1 J322C04TG001 D655 DIODE FR154BD NDL1000FR154 CN1550# CONNECTOR PRINT OSU KW05-120-02-00 J30502KET001 D656 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 CN1650# CONNECTOR PRINT OSU KW05-120-02-00 J30502KET001 D657 DIODE ZENER 4V7BSB-T26 NDTB4R7BST26 CN1750# CONNECTOR PRINT OSU KW05-120-02-00 J30502KET001 D659 SHUNT REGULATOR KIA431B-AT/P NSZBA0TJY038 XZ40F0REN001 D660 WIRE CP STP-S-0.50 D201 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D662 IC SHUNT REGULATOR KIA431-AT/P NSZBA0TJY036 D202 IC SHUNT REGULATOR KIA431-AT/P NSZBA0TJY036 D665 WIRE CP STP-S-0.50 XZ40F0REN001 D203 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D666 DIODE ZENER 10BSB-T26 NDTB010BST26 DIODE ZENER 27BSB-T26 NDTB027BST26 DIODES D204 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D668# D205 DIODE ZENER 27BSB-T26 NDTB027BST26 D670 SCHOTTKY BARRIER DIODE SB160 NDWZ000SB160 D206 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D671 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D207 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D804 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D210 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D805 D211 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D813 DIODE ZENER 20BSB-T26 NDTB020BST26 D212 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D814 DIODE ZENER 20BSB-T26 NDTB020BST26 D303 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D1003 WIRE CP STP-S-0.50 XZ40F0REN001 NDTC033BST26 D1004 WIRE CP STP-S-0.50 XZ40F0REN001 D1005 DIODE ZENER 15BSB-T26 NDTB015BST26 D304 DIODE ZENER 33BSC-T26 20100316 14-3 A0171EL Ref. No. Description Ref. No. Part No. Description Part No. D1007 DIODE ZENER 10BSB-T26 NDTB010BST26 D1765 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1009 DIODE ZENER 12BSB-T26 NDTB012BST26 D1767 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1010 WIRE CP STP-S-0.50 XZ40F0REN001 D1012 WIRE CP STP-S-0.50 XZ40F0REN001 IC201 IC TL3472CDR NSZBA0TTY115 D1013 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 IC601# PHOTO COUPLER LTV817MCF NPECLTV817MF D1045 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 IC631 IC LD1117V NSZBA0SSS046 D1401 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 IC801 AUDIO AMP IC TDA1517P/N3 112 NSCA0SNXP003 D1402 DIODE ZENER 7V5BSB-T26 NDTB7R5BST26 IC803 IC OP AMP NJM4558M(TE1)-#ZZZB QSZBA0TJR089 D1403 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 IC1001 NSCA0T0TY006 D1404 DIODE ZENER 7V5BSB-T26 NDTB7R5BST26 IC PULSE-WIDTH-MODULATION CONT TL494CDR D1406 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 IC1002 IC BA10324AF-E2 QSZBA0TRM032 ICS COILS D1504# DIODE ZENER 1ZB43BB NDWZ0001ZB43 D1550 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 L301 CHOKE COIL 22µH-K LLBD00PKV021 D1551 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 L302 CHIP INDUCTOR LK1608R22K-T LLACKB3TUR22 D1552 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 L303 CHIP INDUCTOR LK1608R22K-T LLACKB3TUR22 LINE FILTER JLB20102 LLEG0Z0XB006 XZ40F0REN001 D1553 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 L601# D1554 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 L804 WIRE CP STP-S-0.50 D1555 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1556 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q171 TRANSISTOR KTC3198-Y-AT/P D1557 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q172 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1558 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q201 TRANSISTOR 2SD400(E) QQUE002SD400 D1559 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q202 TRANSISTOR KTA1267-GR-AT/P NQS1KTA1267P D1560 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q203 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1561 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q205 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1562 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q206 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1563 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q207 TRANSISTOR 2SC2655-Y(TE6 F M) QQSY2SC2655F D1564 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q208 TRANSISTOR KTA1281-Y-AT/P NQVYKTA1281P D1565 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q209 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1567 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q215 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1604# DIODE ZENER 1ZB43BB NDWZ0001ZB43 Q401 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1650 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q402 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1651 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q601# FET MOS 2SK3561(Q) IDSS100UA QFWZ2SK3561Q D1652 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q602# TRANSISTOR 2SC2120-O(TE2 F T) QQS02SC2120F D1653 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q631 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1654 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q632 TRANSISTOR 2SC2120-O(TE2 F T) QQS02SC2120F D1655 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q633 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1656 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q634 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1657 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q635 TRANSISTOR 2SC2120-Y(TE2 F T) QQSY2SC2120F D1658 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q636 TRANSISTOR 2SC2120-Y(TE2 F T) QQSY2SC2120F D1659 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q637 TRANSISTOR 2SC2120-O(TE2 F T) QQS02SC2120F D1660 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q638 NPN TRANSISTOR SMD 2SC4081UBTLQ QQ1Q2SC4081U D1661 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q639 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U D1662 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q640 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 NPN TRANSISTOR POWER 2SC4881F HFE MAX320 QQWZ2SC4881F D1663 D1664 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1665 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1667 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1704# DIODE ZENER 1ZB43BB NDWZ0001ZB43 D1750 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1751 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1752 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1753 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1754 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1755 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1756 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1757 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1758 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1759 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1760 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1761 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1762 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1763 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1764 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 20100316 TRANSISTORS 14-4 NQSYKTC3198P Q641 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P Q643 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F Q801 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P Q1001 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F Q1002 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P Q1003 NPN TRANSISTOR SMD 2SC4081UBTLQ QQ1Q2SC4081U Q1004 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F Q1005 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P Q1006 TRANSISTOR 2SC2120-O(TE2 F T) QQS02SC2120F Q1007 TRANSISTOR 2SC2120-O(TE2 F T) QQS02SC2120F Q1008 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F Q1009 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F Q1010 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P Q1011 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P Q1013 NPN TRANSISTOR SMD 2SC4081UBTLQ QQ1Q2SC4081U Q1014 NPN TRANSISTOR SMD 2SC4081UBTLQ QQ1Q2SC4081U Q1023 NPN TRANSISTOR SMD 2SC4081UBTLQ QQ1Q2SC4081U Q1024 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U Q1401 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P A0171EL Ref. No. Description Part No. Ref. No. Description Part No. NPN TRANSISTOR SMD 2SC4081UBTLQ QQ1Q2SC4081U R409 CHIP RES. 1/10W J 2.2k Ω RRXAJR5Z0222 Q1500# FET MOS SMD TPC8214-H QF2ZTPC8214H R411 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 Q1550 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R412 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 Q1551 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R413 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 Q1600# FET MOS SMD TPC8214-H QF2ZTPC8214H R601# GLASS GLAZE RES. 1/2W J 1M Ω RXX2JZLZ0105 Q1650 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R602# CEMENT RES. 3W K 1.2 Ω RW031R2PG007 Q1651 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R603 RES CARBON FILM 1/4W J 390k Ω RCX4394FS002 Q1700# FET MOS SMD TPC8214-H QF2ZTPC8214H R604 RES CARBON FILM 1/4W J 390k Ω RCX4394FS002 Q1750 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R605 RES CARBON FILM 1/4W J 390k Ω RCX4394FS002 Q1751 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R606 RES CARBON FILM 1/4W J 330k Ω RCX4334FS002 R607 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 Q1402 RESISTORS R172 RES CARBON FILM T 1/4W J 22k Ω RCX4223T1001 R608 RES CARBON FILM T 1/4W J 180 Ω RCX4181T1001 R175 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R609 RES CARBON FILM T 1/4W J 1.5k Ω RCX4152T1001 R201 METAL OXIDE FILM RES. 1W J 2.7 Ω RN012R7ZU001 R610# METAL OXIDE RES. 2W J 0.36 Ω RN02R36ZU001 R202 CHIP RES. 1/10W F 8.2k Ω RRXAFR5H8201 R611 RES CARBON FILM T 1/4W J 2.2k Ω RCX4222T1001 R203 CHIP RES. 1/10W F 2.7k Ω RRXAFR5H2701 R612 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R204 CHIP RES. 1/10W F 2.7k Ω RRXAFR5H2701 R616 RES CARBON FILM T 1/4W J 3.3 Ω RCX43R3T1001 RCX4123T1001 R205 CHIP RES. 1/10W J 1.5k Ω RRXAJR5Z0152 R631 RES CARBON FILM T 1/4W J 12k Ω R207 RES CARBON FILM T 1/4W J 5.6k Ω RCX4562T1001 R632 RES CHIP.(1608) 1/10W D 1.1k Ω RRXADR5H1101 R208 RES CARBON FILM T 1/4W J 5.6k Ω RCX4562T1001 R633 RES CHIP.(1608) 1/10W D 10k Ω RRXADR5H1002 R211 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R634 RES CARBON FILM T 1/4W J 12k Ω RCX4123T1001 R212 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R635 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R213 RES CARBON FILM T 1/4W J 27k Ω RCX4273T1001 R637 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R214 CHIP RES. 1/10W J 3.3k Ω RRXAJR5Z0332 R638 RES CARBON FILM T 1/4W J 2.7k Ω RCX4272T1001 R215 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R639 CHIP RES. 1/10W F 820 Ω RRXAFR5H8200 R217 RES CARBON FILM T 1/4W J 1.0k Ω RCX4102T1001 R640 CHIP RES. 1/10W F 18k Ω RRXAFR5H1802 R218 RES CARBON FILM T 1/4W J 5.6k Ω RCX4562T1001 R641 CHIP RES. 1/10W F 120 Ω RRXAFR5H1200 R219 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R642 CHIP RES. 1/10W F 22k Ω RRXAFR5H2202 R220 CHIP RES. 1/10W J 47k Ω RRXAJR5Z0473 R643 CHIP RES. 1/10W F 22k Ω RRXAFR5H2202 R221 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R644 CHIP RES. 1/10W F 22k Ω RRXAFR5H2202 R222 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R645 CHIP RES. 1/10W F 9.1k Ω RRXAFR5H9101 R223 RES CARBON FILM T 1/4W J 5.6k Ω RCX4562T1001 R646 CHIP RES. 1/10W F 820 Ω RRXAFR5H8200 R224 CHIP RES. 1/10W J 1 Ω RRXAJR5Z01R0 R647 CHIP RES. 1/10W J 47k Ω RRXAJR5Z0473 R225 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R648 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R226 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R649# RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001 R227 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R650 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001 R228 WIRE CP STP-S-0.50 XZ40F0REN001 R651# RES CARBON FILM T 1/4W J 15 Ω RCX4150T1001 R229 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R652 WIRE CP STP-S-0.50 XZ40F0REN001 R230 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R653 CHIP RES. 1/10W F 820 Ω RRXAFR5H8200 R231 CHIP RES. 1/10W J 1.5k Ω RRXAJR5Z0152 R654 CHIP RES. 1/10W F 820 Ω RRXAFR5H8200 R232 CHIP RES. 1/10W J 15k Ω RRXAJR5Z0153 R655 RES CARBON FILM T 1/4W J 2.7k Ω RCX4272T1001 R233 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R656 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001 R234 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R658 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R236 WIRE CP STP-S-0.50 XZ40F0REN001 R659 RES. CARBON FILM J 1/2W J 2.7 Ω RCX22R7T1003 R244 RES. CARBON FILM J 1/2W J 1.5 Ω RCX21R5T1003 R660 RES CHIP.(1608) 1/10W D 10k Ω RRXADR5H1002 R245 RES. CARBON FILM J 1/2W J 1.5 Ω RCX21R5T1003 R661 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001 R250 RES CARBON FILM T 1/4W J 100 Ω RCX4101T1001 R662 RES CARBON FILM T 1/4W J 39 Ω RCX4390T1001 R251 CHIP RES. 1/10W J 47k Ω RRXAJR5Z0473 R663 RES CARBON FILM T 1/4W J 3.3 Ω RCX43R3T1001 R252 RES CARBON FILM T 1/4W J 3.9k Ω RCX4392T1001 R664 RES CARBON FILM T 1/4W J 3.9 Ω RCX43R9T1001 R253 RES CARBON FILM T 1/4W J 56k Ω RCX4563T1001 R665 RES CARBON FILM T 1/4W J 3.9 Ω RCX43R9T1001 R254 RES CARBON FILM T 1/4W J 6.8k Ω RCX4682T1001 R666 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R302 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R667 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R303 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R668 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R304 CHIP RES. 1/10W J 82 Ω RRXAJR5Z0820 R669 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R305 CHIP RES. 1/10W J 82 Ω RRXAJR5Z0820 R670 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R313 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R671 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R401# CHIP RES. 1/10W J 1 Ω RRXAJR5Z01R0 R672 WIRE CP STP-S-0.50 XZ40F0REN001 R402 CHIP RES. 1/10W F 1.2k Ω RRXAFR5H1201 R673 CHIP RES. 1/10W F 3.6k Ω RRXAFR5H3601 R403 CHIP RES. 1/10W F 47.0 k Ω RRXAFR5H4702 R674 CHIP RES. 1/10W F 10k Ω RRXAFR5H1002 R406 CHIP RES. 1/10W J 47k Ω RRXAJR5Z0473 R675 RES CARBON FILM T 1/4W J 560 Ω RCX4561T1001 R407 CHIP RES. 1/10W J 47k Ω RRXAJR5Z0473 R676 RES CARBON FILM T 1/4W J 22 Ω RCX4220T1001 R408 CHIP RES. 1/10W J 47k Ω RRXAJR5Z0473 R677 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R678 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 20100316 14-5 A0171EL Ref. No. Description Part No. Ref. No. Description Part No. R679 RES CARBON FILM T 1/4W J 10k Ω RCX4103T1001 R1043 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R681 CHIP RES. 1/10W F 820 Ω RRXAFR5H8200 R1044 CHIP RES. 1/10W F 2.7k Ω RRXAFR5H2701 R682 WIRE CP STP-S-0.50 XZ40F0REN001 R1045 CHIP RES. 1/10W F 1.2k Ω RRXAFR5H1201 R683 METAL OXIDE FILM RES. 1W J 3.3 Ω RN013R3ZU001 R1048 RES CARBON FILM T 1/4W J 33k Ω RCX4333T1001 R684 METAL OXIDE FILM RES. 1W J 3.3 Ω RN013R3ZU001 R1049 RES CARBON FILM T 1/4W J 1.2k Ω RCX4122T1001 R685 CHIP RES. 1/10W F 620 Ω RRXAFR5H6200 R1050 WIRE CP STP-S-0.50 XZ40F0REN001 R686 CHIP RES. 1/10W F 1.0k Ω RRXAFR5H1001 R1051 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R688 RES CARBON FILM T 1/4W J 1.0 Ω RCX41R0T1001 R1053 WIRE CP STP-S-0.50 XZ40F0REN001 R689 RES CARBON FILM T 1/4W J 33 Ω RCX4330T1001 R1054 CHIP RES. 1/10W F 120 k Ω RRXAFR5H1203 R690 RES CARBON FILM T 1/4W J 3.3 Ω RCX43R3T1001 R1055 CHIP RES. 1/10W F 10k Ω RRXAFR5H1002 R699 RES CARBON FILM T 1/4W J 56 Ω RCX4560T1001 R1056 CHIP RES. 1/10W F 18k Ω RRXAFR5H1802 R803 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1058 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R806 WIRE CP STP-S-0.50 XZ40F0REN001 R1059 CHIP RES. 1/10W J 120k Ω RRXAJR5Z0124 R807 WIRE CP STP-S-0.50 XZ40F0REN001 R1060 CHIP RES. 1/10W F 7.50 k Ω RRXAFR5H7501 R808 CHIP RES. 1/10W J 4.7k Ω RRXAJR5Z0472 R1061 CHIP RES. 1/10W F 4.7k Ω RRXAFR5H4701 R809 CHIP RES. 1/10W J 360 Ω RRXAJR5Z0361 R1062 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R810 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R1063 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R811 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1064 CHIP RES. 1/10W F 1.0k Ω RRXAFR5H1001 R813 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1065 CHIP RES. 1/10W F 27k Ω RRXAFR5H2702 R814 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R1066 CHIP RES. 1/10W J 5.1k Ω RRXAJR5Z0512 R815 CHIP RES. 1/10W J 470 Ω RRXAJR5Z0471 R1067 CHIP RES. 1/10W J 6.8k Ω RRXAJR5Z0682 R816 CHIP RES. 1/10W J 470 Ω RRXAJR5Z0471 R1068 CHIP RES. 1/10W J 8.2k Ω RRXAJR5Z0822 R817 CHIP RES. 1/10W J 18k Ω RRXAJR5Z0183 R1069 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R818 CHIP RES. 1/10W J 15k Ω RRXAJR5Z0153 R1070 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R819 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1071 RES CARBON FILM T 1/4W J 2.7k Ω RCX4272T1001 R820 CHIP RES. 1/10W J 4.7k Ω RRXAJR5Z0472 R1072 RES CARBON FILM T 1/4W J 2.7k Ω RCX4272T1001 R821 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R1074 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R823 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R1075 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R825 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R1076 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R826 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1105 CHIP RES. 1/10W J 3.3k Ω RRXAJR5Z0332 R830 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1106 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R833 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R1107 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R834 RES CARBON FILM T 1/4W J 10k Ω RCX4103T1001 R1109 CHIP RES. 1/10W F 2.2k Ω RRXAFR5H2201 R836 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R1110 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R837 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R1401 CHIP RES. 1/10W J 47k Ω RRXAJR5Z0473 R838 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1402 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R842 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R1403 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1002 WIRE CP STP-S-0.50 XZ40F0REN001 R1404 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1003 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R1405 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1004 RES CARBON FILM T 1/4W J 1.2 Ω RCX41R2T1001 R1406 CHIP RES. 1/10W J 120k Ω RRXAJR5Z0124 R1005 RES CARBON FILM T 1/4W J 4.7k Ω RCX4472T1001 R1407 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1006 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1500 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 R1007 CHIP RES. 1/10W J 22k Ω RRXAJR5Z0223 R1501 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 R1008 CHIP RES. 1/10W F 5.6k Ω RRXAFR5H5601 R1502 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R1009 CHIP RES.(1608) 1/10W F 75k Ω RRXAFR5H0753 R1503 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R1012 WIRE CP STP-S-0.50 XZ40F0REN001 R1508# METAL OXIDE FILM RES. 2W J 0.22 Ω RN02R22ZU001 R1014 CHIP RES. 1/10W J 2.2k Ω RRXAJR5Z0222 R1509 RES CARBON FILM T 1/4W J 33k Ω RCX4333T1001 R1015 CHIP RES. 1/10W J 82k Ω RRXAJR5Z0823 R1550 CHIP RES. 1/10W J 390 Ω RRXAJR5Z0391 R1016 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 R1551 CHIP RES. 1/10W J 390 Ω RRXAJR5Z0391 R1017 CHIP RES. 1/10W J 220k Ω RRXAJR5Z0224 R1552 CHIP RES. 1/10W J 27k Ω RRXAJR5Z0273 R1020 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R1553 CHIP RES. 1/10W J 27k Ω RRXAJR5Z0273 R1021 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R1554 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1023 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R1555 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1024 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R1556 RES CARBON FILM T 1/4W J 27k Ω RCX4273T1001 R1025 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R1557 RES CARBON FILM T 1/4W J 27k Ω RCX4273T1001 R1026 RES CARBON FILM T 1/4W J 4.7k Ω RCX4472T1001 R1558 CHIP RES. 1/10W J 24k Ω RRXAJR5Z0243 R1027 RES CARBON FILM T 1/4W J 1.5k Ω RCX4152T1001 R1559 CHIP RES. 1/10W J 8.2k Ω RRXAJR5Z0822 R1028 RES CARBON FILM T 1/4W J 2.2k Ω RCX4222T1001 R1560 CHIP RES. 1/10W J 220k Ω RRXAJR5Z0224 R1029 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 R1600 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 R1030 RES CARBON FILM T 1/4W J 2.2k Ω RCX4222T1001 R1601 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 R1031 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 R1602 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R1036 CHIP RES. 1/10W J 5.1k Ω RRXAJR5Z0512 R1603 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R1037 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R1608# METAL OXIDE FILM RES. 2W J 0.22 Ω RN02R22ZU001 20100316 14-6 A0171EL Ref. No. Description Part No. R1609 RES CARBON FILM T 1/4W J 33k Ω RCX4333T1001 R1650 CHIP RES. 1/10W J 390 Ω RRXAJR5Z0391 JACK ASSEMBLY Ref. No. Description R1651 CHIP RES. 1/10W J 390 Ω RRXAJR5Z0391 R1652 CHIP RES. 1/10W J 27k Ω JACK ASSEMBLY Consists of the following: RRXAJR5Z0273 CHIP RES. 1/10W J 27k Ω JACK CBA(MJC-A) R1653 RRXAJR5Z0273 R1654 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1655 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R1656 RES CARBON FILM T 1/4W J 27k Ω RCX4273T1001 R1657 RES CARBON FILM T 1/4W J 27k Ω RCX4273T1001 R1658 CHIP RES. 1/10W J 24k Ω RRXAJR5Z0243 R1659 CHIP RES. 1/10W J 8.2k Ω RRXAJR5Z0822 R1660 CHIP RES. 1/10W J 220k Ω RRXAJR5Z0224 R1700 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 R1701 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 R1702 CHIP RES. 1/10W J 12k Ω RRXAJR5Z0123 R1703 CHIP RES. 1/10W J 12k Ω R1708# METAL OXIDE FILM RES. 2W J 0.22 Ω R1709 Part No. A0170MJC-001 A0170MJC-001-JK --------------------------------------------------------------- ----------------------------------A0170MJC-001-FNJN FUNCTION CBA(MJC-B) JUNCTION-A CBA(MJC-C) JUNCTION-B CBA(MJC-D) JUNCTION-C CBA(MJC-E) JACK CBA Ref. No. Description JACK CBA (MJC-A) Consists of the following: Part No. ---------- CAPACITORS RRXAJR5Z0123 C703 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 RN02R22ZU001 C704 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 RES CARBON FILM T 1/4W J 33k Ω RCX4333T1001 C723 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 R1750 CHIP RES. 1/10W J 390 Ω RRXAJR5Z0391 C724 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 R1751 CHIP RES. 1/10W J 390 Ω RRXAJR5Z0391 C731 CHIP CERAMIC CAP. CH J 39pF/50V CHD1JJ3CH390 R1752 CHIP RES. 1/10W J 27k Ω RRXAJR5Z0273 C732 CHIP CERAMIC CAP. CH J 39pF/50V CHD1JJ3CH390 R1753 CHIP RES. 1/10W J 27k Ω RRXAJR5Z0273 C733 CHIP CERAMIC CAP. CH J 39pF/50V CHD1JJ3CH390 R1754 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 C734 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R1755 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 C735 R1756 RES CARBON FILM T 1/4W J 27k Ω RCX4273T1001 C736 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R1757 RES CARBON FILM T 1/4W J 27k Ω RCX4273T1001 C743 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 R1758 CHIP RES. 1/10W J 24k Ω RRXAJR5Z0243 C744 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 R1759 CHIP RES. 1/10W J 8.2k Ω RRXAJR5Z0822 C751 CHIP CERAMIC CAP.(1608) CH J 100pF/50V CHD1JJ3CH101 R1760 CHIP RES. 1/10W J 220k Ω RRXAJR5Z0224 C752 CHIP CERAMIC CAP.(1608) CH J 100pF/50V CHD1JJ3CH101 C753 CHIP CERAMIC CAP.(1608) CH J 100pF/50V CHD1JJ3CH101 WAC0172LW008 C754 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 1EM324377 C755 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 MISCELLANEOUS AC601# B13 AC CORD PB8K9F9110A-057 HEAT SINK PMU A8A70UH B14 POW HEAT SINK A7120UH 1EM423993 C756 BC301 RES CARBON FILM T 1/4W J 470 Ω RCX4471T1001 C757 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 BC601 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 C758 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 PAGE20CW3402 C771 ELECTROLYTIC CAP. 100µF/16V M H7 CE1CMAVSL101 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 F601# FUSE STC4A125V U/CT FH601 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002 C772 FH602 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002 C773 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 JS102 WIRE CP STP-S-0.50 XZ40F0REN001 C775 CHIP CERAMIC CAP.(1608) CH J 33pF/50V CHD1JJ3CH330 JS304 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 C776 CHIP CERAMIC CAP.(1608) CH J 33pF/50V CHD1JJ3CH330 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 JS305 WIRE CP STP-S-0.50 XZ40F0REN001 C841 JS306 WIRE CP STP-S-0.50 XZ40F0REN001 C842 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105 JS310 WIRE CP STP-S-0.50 XZ40F0REN001 C843 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 JS632 WIRE CP STP-S-0.50 XZ40F0REN001 C845 CHIP CERAMIC CAP.(1608) CH J 33pF/50V CHD1JJ3CH330 DIODES JS801 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 JS802 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 D701 ZENER DIODE EDZTE618.2B QD1B00EDZ8R2 JS803 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 D702 ZENER DIODE EDZTE618.2B QD1B00EDZ8R2 JS804 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 D703 ZENER DIODE EDZTE618.2B QD1B00EDZ8R2 ZENER DIODE EDZTE618.2B QD1B00EDZ8R2 NDTB8R2BST26 JS1002 WIRE CP STP-S-0.50 XZ40F0REN001 D704 JS1003 WIRE CP STP-S-0.50 XZ40F0REN001 D705 DIODE ZENER 8V2BSB-T26 JS1005 WIRE CP STP-S-0.50 XZ40F0REN001 D706 DIODE ZENER 8V2BSB-T26 NDTB8R2BST26 L13 SCREW B-TIGHT D3X8 BIND HEAD+ GBJB3080 D707 ZENER DIODE EDZTE618.2B QD1B00EDZ8R2 SA601# SURGE ABSORBER 470V+-10PER NVQZ10D471KB D708 ZENER DIODE EDZTE618.2B QD1B00EDZ8R2 T601# TRANS POWER BCK-28-9926 LTT2PC0XB045 D709 DIODE ZENER 8V2BSB-T26 NDTB8R2BST26 TM601 EYELET TYPE D-1 0VM406868 D710 ZENER DIODE EDZTE618.2B QD1B00EDZ8R2 TM602 EYELET TYPE D-1 0VM406868 FFC CONNECTOR IMSA-9615S-29A-PP-A JC96J29ER007 242 SERIES CONNECTOR 224202104W1 J322C04TG001 CONNECTORS T1500# TRANS INVERTER HVT-179 LTZ3PZ0XB012 CN701 T1600# TRANS INVERTER HVT-179 LTZ3PZ0XB012 CN861A T1700# TRANS INVERTER HVT-179 LTZ3PZ0XB012 TU302 TUNER UNIT ATSC TDAU4-D05A UTNATS0AL002 IC IC771 IC SWITCHING TC4052BF(ELNF) QSZBA0TTS162 COILS L851 20100316 14-7 WIRE CP STP-S-0.50 XZ40F0REN001 A0171EL Ref. No. Description Ref. No. Part No. Description Part No. L852 WIRE CP STP-S-0.50 XZ40F0REN001 R846 CHIP RES. 1/10W J 100 Ω RRXAJR5Z0101 L853 WIRE CP STP-S-0.50 XZ40F0REN001 R847 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R848 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 TRANSISTORS Q722 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R851 RES CARBON FILM T 1/4W J 180 Ω RCX4181T1001 Q771 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R852 RES CARBON FILM T 1/4W J 180 Ω RCX4181T1001 Q773 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P Q774 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P BC771 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 Q841 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P BC841 CHIP INDUCTOR BK1608HS601-T LLC601NTU017 JK711 JACK HPEP SML PCB S PJ-358H JXSJ020YUQ01 R711 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 JK721 JACK RCA PCB S WHITE 01/RCA-101H(WH) JXRJ010YUQ02 R712 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 JK722 JACK RCA PCB S RED 01/RCA-101H(RD) JXRJ010YUQ01 R717 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 JK731 JACK RCA PCB S GREEN 01/RCA-101H(GN) JXRJ010YUQ03 R718 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 JK732 JACK RCA PCB S BLUE 01/RCA-101H(BL) JXRJ010YUQ04 R721 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 JK733 JACK RCA PCB S RED 01/RCA-101H(RD) JXRJ010YUQ01 R722 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 JK741 JACK RCA PCB S WHITE 01/RCA-101H(WH) JXRJ010YUQ02 R727 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 JK742 JACK RCA PCB S RED 01/RCA-101H(RD) JXRJ010YUQ01 MISCELLANEOUS RESISTORS R728 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 JK751 JACK SW DIN PCB L DIN-435C(777D) JYEL040YUQ03 R731 CHIP RES.(1608) 1/10W F 75 Ω RRXAFR5H75R0 JK752 JACK RCA PCB L RCA-101S(1)-03 JXRL010YUQ12 R732 CHIP RES.(1608) 1/10W F 75 Ω RRXAFR5H75R0 JK753 JACK RCA PCB L RCA-101S(1)-04 JXRL010YUQ13 R733 CHIP RES.(1608) 1/10W F 75 Ω RRXAFR5H75R0 JK754 JACK SW RCA PCB L RCA-102F(RD) JYRL010YUQ05 R734 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 JK841 JACK RCA PCB S ORANGE 01/RCA-101H(OR) JXRJ010YUQ06 R735 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 JK851 JACK SW HPEP SML PCB L PJ-350 JYSL010YUQ03 R736 CHIP RES. 1/10W J 10 Ω RRXAJR5Z0100 JS701 CHIP RES.(1608) 1/10W 0 Ω RRXAZR5Z0000 R741 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R742 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R747 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 R748 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 R751 CHIP RES. 1/10W J 75 Ω RRXAJR5Z0750 R752 CHIP RES. 1/10W J 75 Ω RRXAJR5Z0750 R753 CHIP RES. 1/10W J 75 Ω RRXAJR5Z0750 R754 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R755 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R756 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R757 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R758 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R763 RES CARBON FILM T 1/4W J 56k Ω RCX4563T1001 R764 CHIP RES. 1/10W J 56k Ω RRXAJR5Z0563 R772 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R773 CHIP RES. 1/10W J 10k Ω RRXAJR5Z0103 R774 RES CARBON FILM T 1/4W J 10k Ω RCX4103T1001 R775 RES CARBON FILM T 1/4W J 10k Ω RCX4103T1001 R780 CHIP RES. 1/10W J 82k Ω RRXAJR5Z0823 R781 CHIP RES. 1/10W J 82k Ω RRXAJR5Z0823 R782 RES CARBON FILM T 1/4W J 82k Ω RCX4823T1001 R783 CHIP RES. 1/10W J 82k Ω RRXAJR5Z0823 R784 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R785 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R786 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R787 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R788 RES CARBON FILM T 1/4W J 82k Ω RCX4823T1001 R789 RES CARBON FILM T 1/4W J 82k Ω RCX4823T1001 R790 R791 CHIP RES. 1/10W J 82k Ω CHIP RES. 1/10W J 82k Ω CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 R795 CHIP RES. 1/10W J 100k Ω CHIP RES. 1/10W J 2.2k Ω RRXAJR5Z0222 CHIP RES. 1/10W J 2.2k Ω RRXAJR5Z0222 R843 CHIP RES. 1/10W J 110 Ω RRXAJR5Z0111 R844 CHIP RES. 1/10W J 220 Ω RRXAJR5Z0221 R845 CHIP RES. 1/10W J 100k Ω RRXAJR5Z0104 20100316 C103 ELECTROLYTIC CAP. 47µF/16V M H7 CE1CMAVSL470 C104 CHIP CERAMIC CAP. B K 330pF/50V CHD1JK30B331 C108 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 DIODES D101 ZENER DIODE EDZTE61 6.8B QD1B00EDZ6R8 D103 LED L-53HT NP4Z000L53HT D104 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA RESISTORS R106 RES CARBON FILM T 1/4W J 100 Ω RCX4101T1001 R107 CHIP RES. 1/10W J 3.3k Ω RRXAJR5Z0332 R108 CHIP RES. 1/10W J 220 Ω RRXAJR5Z0221 R109 CHIP RES. 1/10W J 220 Ω RRXAJR5Z0221 R110 CHIP RES. 1/10W J 1k Ω RRXAJR5Z0102 R111 CHIP RES. 1/10W F 18k Ω RRXAFR5H1802 R112 CHIP RES. 1/10W F 8.2k Ω RRXAFR5H8201 R113 CHIP RES.(1608) 1/10W F 4.7k Ω RRXAFR5H0472 R114 CHIP RES. 1/10W F 2.7k Ω RRXAFR5H2701 R115 CHIP RES.(1608) 1/10W F 4.7k Ω RRXAFR5H0472 R116 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R118 CHIP RES. 1/10W F 10k Ω RRXAFR5H1002 SW104 TACT SWITCH SKHHLMA010 SST0101AL049 SW105 TACT SWITCH SKHHLMA010 SST0101AL049 SW106 TACT SWITCH SKHHLMA010 SST0101AL049 SW107 TACT SWITCH SKHHLMA010 SST0101AL049 SW108 TACT SWITCH SKHHLMA010 SST0101AL049 SW109 TACT SWITCH SKHHLMA010 SST0101AL049 SWITCHES RRXAJR5Z0104 R797 Part No. ---------- CAPACITORS RRXAJR5Z0104 R796 Description FUNCTION CBA (MJC-B) Consists of the following: RRXAJR5Z0823 R793 CHIP RES. 1/10W J 100k Ω Ref. No. RRXAJR5Z0823 R792 R794 FUNCTION CBA MISCELLANEOUS RS101 14-8 SENSOR REMOTE RECEIVER KSM-712TH2E USESJRSKK044 A0171EL JUNCTION-A CBA Ref. No. Description JUNCTION-A CBA(MJC-C) Consists of the following: Part No. ---------- CONNECTOR CN101 242 SERIES CONNECTOR TUC-P08X-B1 WHT JCTUB08TG002 ST CL101 WIRE ASSEMBLY 8PIN 8PIN 150MM MISCELLANEOUS WX1A9170-001 JUNCTION-B CBA Ref. No. Description JUNCTION-B CBA(MJC-D) Consists of the following: Part No. ---------- CONNECTOR CN862B 242 SERIES CONNECTOR TUC-P04X-B1 WHT JCTUB04TG002 ST CL862 WIRE ASSEMBLY 2PIN 2PIN 90MM MISCELLANEOUS WX1A9170-002 JUNCTION-C CBA Ref. No. Description JUNCTION-C CBA(MJC-E) Consists of the following: Part No. ---------- CONNECTOR CN861B 242 SERIES CONNECTOR TUC-P04X-B1 WHT JCTUB04TG002 ST CL861 WIRE ASSEMBLY 2PIN 2PIN 90MM MISCELLANEOUS 20100316 WX1A9170-002 14-9 A0171EL PARTS LIST [22MF330B/F7] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description Part No. STAND ASSEMBLY A0170UH 1ESA24417 A1 FRONT CABINET A9170UH 1EM023469C A5 DECORATION PLATE A0170UH 1EM224503 A6# RATING LABEL A0170UH ---------- L17 STAND SCREW KIT A91N0UH 1ESA19876 S1 CARTON A0170UH 1EM431117 1EMN26263 X2# OWNERS MANUAL A01N0UH/A0170UH X3 REMOTE CONTROL NF804UD NF804UD X6 QUICK START GUIDE A01N0UH 1EMN26264 20100513 14-10 A0170CA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description DIGITAL MAIN CBA UNIT 20100513 Part No. A0170MMA-002 14-11 A0170EL PARTS LIST [LC220EM1 (Serial No. : DS1A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. A1 Description Part No. FRONT CABINET A0175UH 1EM025433 A3 CONTROL PLATE A91N3UH 1EM325763 A5 DECORATION PLATE A0175UH 1EM224267 A6# RATING LABEL A0175UH ---------- A14 LOGO LABEL A8A71UH ---------- S1 CARTON A0175UH 1EM431232 S2 STYROFOAM TOP A0175UH 1EM025434 S3 STYROFOAM BOTTOM A0175UH 1EM025435 X2# OWNERS MANUAL A01N4UH 1EMN25819 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A01N4UH 1EMN25820 20100401 14-12 A0175CA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description DIGITAL MAIN CBA UNIT 20100401 Part No. A0173MMA-003 14-13 A0175EL PARTS LIST [LC220EM1 (Serial No. : TH1A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description STAND ASSEMBLY A01N6UT Part No. 1ESA24415 A1 FRONT CABINET A0175UH 1EM025433 A3 CONTROL PLATE A91N3UH 1EM325763 A5 DECORATION PLATE A0176UT 1EM224703 A6# RATING LABEL A0176UT ---------- A14 LOGO LABEL A8A71UH ---------- L17 STAND SCREW KIT A01N6UT 1ESA24406 S1 CARTON A0176UT 1EM432237 S2 STYROFOAM TOP A0176UT 1EM026065 S3 STYROFOAM BOTTOM A0176UT 1EM026066 S4 SET BAG A81N0UH 1EM323958A X2# OWNERS MANUAL A01N6UT 1EMN26401 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A01N6UT 1EMN26402 X8 CHILD SAFETY SHEET A91N8UT 1EMN25041 20100602 14-14 A0176CA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description DIGITAL MAIN CBA UNIT 20100602 Part No. A0173MMA-003 14-15 A0176EL PARTS LIST [LC220EM1 (Serial No.: TH2A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description STAND ASSEMBLY A01N6UT Part No. 1ESA24415 A1 FRONT CABINET A0175UH 1EM025433 A3 CONTROL PLATE A91N3UH 1EM325763 A5 DECORATION PLATE A0176UT 1EM224703 A6# RATING LABEL A0176UT ---------- A14 LOGO LABEL A8A71UH ---------- CL861 WIRE ASSEMBLY 2PIN 2PIN 90MM WX1A0170-002 CL862 WIRE ASSEMBLY 2PIN 2PIN 90MM WX1A0170-002 L17 STAND SCREW KIT A01N6UT 1ESA24406 S1 CARTON A0176UT 1EM432237 S2 STYROFOAM TOP A0176UT 1EM026065 S3 STYROFOAM BOTTOM A0176UT 1EM026066 S4 SET BAG A81N0UH 1EM323958A X2# OWNERS MANUAL A01N6UT 1EMN26401 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A01N6UT 1EMN26402 X8 CHILD SAFETY SHEET A91N8UT 1EMN25041 20100708 14-16 A017GCA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description DIGITAL MAIN CBA UNIT CN102 Part No. A017GMMA-002 MAIN CBA A017GMPWA001 PH CONNECTOR TOP 8P B8B-PH-K-S (LF)(SN) J3PHC08JG029 CN801A Not used CN872 PH CONNECTOR TOP 2P B2B-PH-K-S (LF)(SN) D612 DIODE ZENER 1ZB220-YBB NDWZ01ZB220Y D631 DIODE SCHOTTKY SB2A0BD NDWZ000SB2A0 J3PHC02JG029 D668 DIODE ZENER 27BSB-T26 NDTB027BST26 R637 RES CARBON FILM T 1/4W J 220 OHM RCX4221T1001 JACK ASSEMBLY Consists of the following A017GMJC-001 JACK CBA(MJC-A) FUNCTION CBA(MJC-B) A017GMJC-001-JK A017GMJC-001-FN JACK CBA(MJC-A) ---------- CN861A Not used CN871 PH CONNECTOR TOP 2P B2B-PH-K-S (LF)(SN) J3PHC02JG029 FUNCTION CBA(MJC-B) ---------- WIRE ASSEMBLY 8PIN 8PIN 150MM WX1A0170-001 CL101 JUNCTION-A CBA (In this model, the JUNCTION-A CBA is not used.) CN101 Not used CL101 Not used JUNCTION-B CBA (In this model, the JUNCTION-B CBA is not used.) CN862B Not used CL862 Not used JUNCTION-C CBA (In this model, the JUNCTION-C CBA is not used.) CN861B Not used CL861 Not used 20100708 14-17 A017GEL PARTS LIST [LC220SL1 (Serial No. : DS1A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. A1 Description Part No. FRONT CABINET A0173UH 1EM124953 A3 CONTROL PLATE A91N3UH 1EM325763 A5 DECORATION PLATE A0175UH 1EM224267 A6# RATING LABEL A0173UH ---------- A14 LOGO LABEL A8A71UH ---------- L17 STAND SCREW KIT A91N0UH 1ESA19876 S1 CARTON A0173UH 1EM432139 S2 STYROFOAM TOP A0175UH 1EM025434 S3 STYROFOAM BOTTOM A0175UH 1EM025435 X2# OWNERS MANUAL A01N3UH 1EMN26205 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A01N3UH 1EMN26266 20100413 14-18 A0173CA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description DIGITAL MAIN CBA UNIT 20100413 Part No. A0173MMA-003 14-19 A0173EL PARTS LIST [LC220SL1 (Serial No. : TH1A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description STAND ASSEMBLY A01N6UT Part No. 1ESA24415 A1 FRONT CABINET A0173UH 1EM124953 A3 CONTROL PLATE A91N3UH 1EM325763 A5 DECORATION PLATE A0176UT 1EM224703 A6# RATING LABEL A0179UT ---------- A14 LOGO LABEL A8A71UH ---------- L17 STAND SCREW KIT A01N6UT 1ESA24406 S1 CARTON A0179UT 1EM432257 S2 STYROFOAM TOP A0176UT 1EM026065 S3 STYROFOAM BOTTOM A0176UT 1EM026066 S4 SET BAG A81N0UH 1EM323958A X2# OWNERS MANUAL A01N5UT 1EMN26399 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A01N5UT 1EMN26400 X8 CHILD SAFETY SHEET A91N8UT 1EMN25041 20100616 14-20 A0179CA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description DIGITAL MAIN CBA UNIT 20100616 Part No. A0173MMA-003 14-21 A0179EL PARTS LIST [LC220SL1 (Serial No.: TH2A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description Part No. STAND ASSEMBLY A01N6UT 1ESA24415 A1 FRONT CABINET A0173UH 1EM124953 A3 CONTROL PLATE A91N3UH 1EM325763 A5 DECORATION PLATE A0176UT 1EM224703 A6# RATING LABEL A0179UT ---------- A14 LOGO LABEL A8A71UH ---------- CL861 WIRE ASSEMBLY 2PIN 2PIN 90MM WX1A0170-002 CL862 WIRE ASSEMBLY 2PIN 2PIN 90MM WX1A0170-002 L17 STAND SCREW KIT A01N6UT 1ESA24406 S1 CARTON A0179UT 1EM432257 S2 STYROFOAM TOP A0176UT 1EM026065 S3 STYROFOAM BOTTOM A0176UT 1EM026066 S4 SET BAG A81N0UH 1EM323958A X2# OWNERS MANUAL A01N5UT 1EMN26399 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A01N5UT 1EMN26400 X8 CHILD SAFETY SHEET A91N8UT 1EMN25041 20100716 14-22 A017FCA Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model LC220SS1 Ref. No. Description DIGITAL MAIN CBA UNIT CN102 Part No. A017GMMA-002 MAIN CBA A017GMPWA001 PH CONNECTOR TOP 8P B8B-PH-K-S (LF)(SN) J3PHC08JG029 CN801A Not used CN872 PH CONNECTOR TOP 2P B2B-PH-K-S (LF)(SN) D612 DIODE ZENER 1ZB220-YBB NDWZ01ZB220Y D631 DIODE SCHOTTKY SB2A0BD NDWZ000SB2A0 J3PHC02JG029 D668 DIODE ZENER 27BSB-T26 NDTB027BST26 R637 RES CARBON FILM T 1/4W J 220 OHM RCX4221T1001 JACK ASSEMBLY Consists of the following A017GMJC-001 JACK CBA(MJC-A) FUNCTION CBA(MJC-B) A017GMJC-001-JK A017GMJC-001-FN JACK CBA(MJC-A) ---------- CN861A Not used CN871 PH CONNECTOR TOP 2P B2B-PH-K-S (LF)(SN) J3PHC02JG029 FUNCTION CBA(MJC-B) ---------- WIRE ASSEMBLY 8PIN 8PIN 150MM WX1A0170-001 CL101 JUNCTION-A CBA (In this model, the JUNCTION-A CBA is not used.) CN101 Not used CL101 Not used JUNCTION-B CBA (In this model, the JUNCTION-B CBA is not used.) CN862B Not used CL862 Not used JUNCTION-C CBA (In this model, the JUNCTION-C CBA is not used.) CN861B Not used CL861 Not used 20100716 14-23 A017FEL REVISION HISTORY Chassis FL10.1 • 2010-03-30 LC220SS1 added • 2010-04-23 LC220EM1 (Serial No. : DS1A) added • 2010-05-06 LC220SL1 (Serial No. : DS1A) added • 2010-06-07 22MF330B/F7 added • 2010-06-25 LC220EM1 (Serial No. : TH1A) added • 2010-06-25 LC220SL1 (Serial No. : TH1A) added • 2010-07-30 LC220EM1 (Serial No. : TH2A) added • 2010-07-30 LC220SL1 (Serial No. : TH2A) added • TBD LC220EM1 (Serial No. : DS2A) added • TBD LC220SL1 (Serial No. : DS2A) added 15-1 FL10.1REV
© Copyright 2024