1. Ingeniería

Disclaimer
This is the Airbus Qualified Special Process List (Register of Qualified Couples >Special Process / External Shop<)
Publication of this list neither engages Airbus in any contract relationship/responsibility nor allows automatic contract authorization, ordering, etc.
All subcontractors using qualified couples 'special process & external shop' from the Airbus QSPL remain responsible of the quality of their products.
As consequence, they shall conduct:
* Incoming inspections, as appropriate
* Performance measurements of these external shops
* Direct claim management with the external shop, as needed
* Reporting of external shop' s performance to Airbus upon request
* Alerting/informing Airbus in case of:
- significant events or
- identified risks with potential impact on Airbus
- consistently unsatisfactory quality results or
- the external shop is either unwilling or unable to implement
a corrective action plan within a reasonable time-scale
The list it regulary updated (minimum quarterly).
All rights are reserved.
For any further information, please contact [email protected].
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 1 of 876
Extract of Airbus Qualified Special Process List (QSPL) External Report
Updated:
= Register of Qualified Couples >Special Process / External Shop<
2015-02-02
In Accordance with AP5270 - Qualification Process of Couple 'Special Process & External Shop'
For any further information, please contact [email protected].
Report 1: Ordered By External Shop, Company Name
External Shop
Special
Process
Status
YES
3 - QUALIFIED
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NONE
TBD
3 - QUALIFIED
NONE
INSTALLATION OF SOLID ALUMINUM
RIVETS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5814 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-9910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5814 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
80-T-35-5403
80-T-35-5403
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
80-T-35-9123
APPLICATION OF PVF FOIL
PAINT COATING IN INTERIOR
FURNISHING
APPLICATION OF PVF FOIL
PAINT COATING IN INTERIOR
FURNISHING
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
80-T-34-5814
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS01-02-017
80-T-35-9123
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2909
MANUFACTURE OF SANDWICH
COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2909 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
80-T-30-0032
MACHINING OF FRP COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-0032 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-07-026
FILLING AND SPLICING OF SANDWICH
PANEL HONEYCOMB CORES FOR
INTERIOR PARTS
80-T-39-0121
INTRODUCTION OF CORE AND EDGE
FILLER COMPOUNDS INTO SANDWICH
COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0121 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-31-2916
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2916 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-02-006
APPLICATION OF DECORATIVE
INTERIOR PAINT
80-T-35-9123
PAINT COATING IN INTERIOR
FURNISHING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-02-011
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 2 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-02-016
APPLICATION OF DECORATIVE SHEET
MATERIAL
80-T-35-5403
APPLICATION OF PVF FOIL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5403 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-04-005
APPLICATION OF GAP FILLER - EASY
TO REMOVE
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-05-004
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5803 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS06-02-005
MANUFACTURING OF METALLIC
SANDWICH PARTS - BONDING
PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS06-02-007
BONDING METAL / METAL PARTS
STRUCTURAL BONDING PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS08-03-002
PERMANENT MARKING WITH INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0132 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS09-01-002
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0014 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
299679
3D ICOM GMBH & CO KG
HAMBURG
Germany
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0019
CLEANING WITH EMULSION CLEANING
AGENTS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0019 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
80-T-30-4010
NO
3 - QUALIFIED
NONE
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
80-T-30-6918
NO
3 - QUALIFIED
NONE
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
80-T-30-9910
YES
3 - QUALIFIED
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
80-T-32-2611
YES
3 - QUALIFIED
APPOVED ONLY FOR REAMING
OPERATIONS PRIOR TO COLD
WORKING OF HOLES ACC. 80-T-322611
NONE
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
80-T-33-3010
NO
3 - QUALIFIED
NONE
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
80-T-35-0014
NO
3 - QUALIFIED
NONE
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
80-T-39-0132
NO
3 - QUALIFIED
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
AIPS03-09-003
SHEAR-CUTTING OF METALLIC
SHEETS AND SECTIONS
AIPI03-09-003
SHEAR-CUTTING OF METALLIC
SHEETS AND SECTIONS
NO
3 - QUALIFIED
NONE
THIS QUALIFICATION IS LIMITED TO
EXTENDED WORKBENCH ONLY (SEE
GRAMS AP2190)
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
MACHINING METALS BY MECHANICAL
ACTION
NO
3 - QUALIFIED
THIS QUALIFICATION IS LIMITED TO
EXTENDED WORKBENCH ONLY (SEE
GRAMS AP2190) COOLING LUBRICANT
SENTOS VLR 3 TO BE USED.
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
AIPI03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO
3 - QUALIFIED
THIS QUALIFICATION IS LIMITED TO
EXTENDED WORKBENCH ONLY (SEE
GRAMS AP2190)
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
COLD WORKING OF HOLES
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
MARKING WITH INDELIBLE INK
80-T-30-4010
80-T-30-6918
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
80-T-30-9910
80-T-32-2611
80-T-33-3010
80-T-35-0014
80-T-39-0132
COLD WORKING OF HOLES
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
MARKING WITH INDELIBLE INK
298679
A&T MANUFACTURING GMBH
NORDENHAM
Germany
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
294139
A&T TECHNICS GMBH
NORDENHAM
Germany
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
YES
3 - QUALIFIED
EWB CUTTING OF MATERIAL
133527
A2C AIR COST CONTROL
L'ISLE JOURDAIN
France
AIPS07-06-001
LASER WIRE AND CABLE MARKING BY
ULTRA VIOLET (UV) PROCESS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(PRO36)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/04/2015
NONE
299943
ABBEY METAL FINISHING CO
LTD
LEICESTERSHIRE
United Kingdom
ABP6-5230
TESTING BY PENETRANT FLAW
DETECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 3 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
299943
ABBEY METAL FINISHING CO
LTD
LEICESTERSHIRE
United Kingdom
ABP9-4325
PROTECTION OF MARKING BY THE
APPLICATION OF POLYURETHANE
PAINTS AS OVERCOATING
ABP9-4325
PROTECTION OF MARKING BY THE
APPLICATION OF POLYURETHANE
PAINTS AS OVERCOATING
TBD
3 - QUALIFIED
NONE
299943
ABBEY METAL FINISHING CO
LTD
LEICESTERSHIRE
United Kingdom
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
LEICESTERSHIRE
United Kingdom
AIPS02-04-009
APPLICATION OF CORROSION
INHIBITING SOLID FILM LUBRICANT
AIPI02-04-009
APPLICATION OF CORROSION
INHIBITING SOLID FILM LUBRICANT
NO
3 - QUALIFIED
NONE
LEICESTERSHIRE
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
NONE
LEICESTERSHIRE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-009
APPLICATION OF STRUCTURAL
PAINTS
YES
3 - QUALIFIED
NONE
LEICESTERSHIRE
United Kingdom
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
SURFACE PREPARATION ONLY
LEICESTERSHIRE
United Kingdom
AIPS08-03-002
PERMANENT MARKING WITH INK
AIPI08-03-002
PERMANENT MARKING WITH INK
NO
3 - QUALIFIED
NONE
LEICESTERSHIRE
United Kingdom
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
GETAFE
Spain
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
NO
3 - QUALIFIED
NONE
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
NO
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
YES
3 - QUALIFIED
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
PRE-HOLE ONLY. ALL
DOCUMENTATION IS COMPOSYSTEM’S
DOCUMENTATION. MACHINES USED:
MORI SEIKI SV50-20H (N°407), MORI
SEIKI DMF360 (N°418) AND TALADRO
IBARMIA.
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
MIXING AND APPLICATION TYPE 1 A+B
YES
3 - QUALIFIED
MIXING AND APPLICATION TYPE 1 A+B
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
299943
299943
299943
299943
299943
299943
293092
ABBEY METAL FINISHING CO
LTD
ABBEY METAL FINISHING CO
LTD
ABBEY METAL FINISHING CO
LTD
ABBEY METAL FINISHING CO
LTD
ABBEY METAL FINISHING CO
LTD
ABBEY METAL FINISHING CO
LTD
ACATEC S L
293092
ACATEC S L
GETAFE
Spain
AIPS01-02-005
293092
ACATEC S L
GETAFE
Spain
AIPS01-02-022
293092
ACATEC S L
GETAFE
Spain
AIPS01-02-022
293092
ACATEC S L
GETAFE
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-364
293092
ACATEC S L
GETAFE
Spain
AIPS03-06-003
LOCKING USING WIRE
I+D-P-373
293092
ACATEC S L
GETAFE
Spain
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
I+D-P-065
293092
293092
ACATEC S L
ACATEC S L
GETAFE
GETAFE
Spain
Spain
AIPS03-06-009
AIPS03-06-014
293092
ACATEC S L
GETAFE
Spain
AIPS05-05-003
293092
ACATEC S L
GETAFE
Spain
293092
ACATEC S L
GETAFE
213187
ACATEC SL
213187
ACATEC SL
213187
ACATEC SL
I+D-P-231
I+D-P-117
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
STEEL AND TITANIUM HI-LOK
FASTENERS
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
WIRE LOCKING OF PARTS
FIXING OF MECHANICAL ELEMENTS
WITH ANAEROBIAN RESINS (LOCTITE
TYPE)
LIQUID SHIMS
LOCKING OF PARTS WITH COTTER
PINS
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
I+D-P-061
I+D-P-376
AIPS05-05-004
SHIMMING FOR ASSEMBLY
LOCKING BY SPLIT PIN
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
Spain
AIPS07-01-006
ELECTRICAL BONDING
I+D-P-355
ARGANDA DEL REY
Spain
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
I+D-P-231
ARGANDA DEL REY
Spain
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
AIPI01-02-003
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
ARGANDA DEL REY
Spain
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-005
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-008
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-017
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-017
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-019
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-022
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-022
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-02-022
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS01-03-004
Airbus Qualified Special Process List (External Report)
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF HELICOIL
THREADED INSERTS
I+D-P-186
I+D-P-146
APPLICATION OF SEALANTS
BONDING AND GROUNDING
INSTALLATION
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
AIPI01-02-008
I+D-P-231
I+D-P-146
AIPI01-02-019
I+D-P-364
I+D-P-231
I+D-P-117
AIPI01-03-004
APPLICATION OF SEALANTS
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
STEEL AND TITANIUM HI-LOK
FASTENERS
INSTALLATION OF HELICAL THREADED
INSERTS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 4 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS02-01-001
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS02-01-002
213187
ACATEC SL
ARGANDA DEL REY
Spain
Title (PS)
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
Ref. No. (PI)
I+D-P-213
I+D-P-213
Couple qualification Status
Title (PI)
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
ONLY ANODIZING PROCESS TYPE IB
YES
3 - QUALIFIED
NONE
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
ONLY FOR PROCESS FAMILY B
I+D-P-416
ALUMINIUM AND ALUMINIUM ALLOY
TARTARIC-SULPHURIC ANODISING
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
YES
3 - QUALIFIED
ONLY TYPE 1 METHOD A.
YES
3 - QUALIFIED
ONLY FOR LOCAL APPLICATION (TYPE
I)
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
NO
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
MACHINE QUALIFIED: SV50 VH MORI
SEIKI
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS02-01-004
ANODIZING OF TITANIUM AND ITS
ALLOYS
I+D-P-048
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
I+D-P-202
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS03-06-002
LOCKING USING TAB WASHERS
NO_AIRBUS_PI
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS03-06-003
LOCKING USING WIRE
I+D-P-373
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
I+D-P-065
213187
213187
ACATEC SL
ACATEC SL
ARGANDA DEL REY
ARGANDA DEL REY
Spain
Spain
AIPS03-06-009
AIPS03-06-014
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS03-07-002
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS03-07-002
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-02-003
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-02-009
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-02-009
SHIMMING FOR ASSEMBLY
LOCKING BY SPLIT PIN
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
I+D-P-061
I+D-P-376
I+D-P-387
AIPI03-07-002
I+D-P-060
AIPI05-02-009
I+D-P-064
ANODIZING OF TITANIUM AND ITS
ALLOYS
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
CHEMICAL CONVERSION COATING
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
WIRE LOCKING OF PARTS
FIXING OF MECHANICAL ELEMENTS
WITH ANAEROBIAN RESINS (LOCTITE
TYPE)
LIQUID SHIMS
LOCKING OF PARTS WITH COTTER
PINS
MACHINING COMPOSITES
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
PAINT (GENERAL SPECIFICATION)
APPLICATION OF STRUCTURAL
PAINTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
YES
ONLY THE PROCESS OF APPLCATION
OF ORGANIC FINISHES ON LIGHT
9 - LIMITED SCOPE (AIPS00-00- ALLOY IS CERTIFICATED.I+D-P-060
006)
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
YES
3 - QUALIFIED
ONLY FOR METALLIC MATERIALS
YES
3 - QUALIFIED
NONE
ONLY THE PROCESS OF APPLCATION
OF ORGANIC FINISHES ON LIGHT
9 - LIMITED SCOPE (AIPS00-00- ALLOY IS CERTIFICATED.I+D-P-060
006)
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
I+D-P-060
PAINT (GENERAL SPECIFICATION)
YES
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-062
YES
3 - QUALIFIED
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-05-001
I+D-P-146
YES
3 - QUALIFIED
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-05-003
SEALING OF AIRCRAFT STRUCTURE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
ONLY MANUAL APPLICATION OF
SEALANT
ONLY VALID TO P/N F551-82341000/001, STRAP 1 ASSY
Sólo tipo I
YES
3 - QUALIFIED
NONE
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-05-003
YES
3 - QUALIFIED
NONE
213187
213187
ACATEC SL
ACATEC SL
ARGANDA DEL REY
ARGANDA DEL REY
Spain
Spain
AIPS05-05-004
AIPS05-05-004
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
WET INSTALLATION OF FASTENERS
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
I+D-P-186
AIPI05-05-003
I+D-P-146
AIPI05-05-004
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
APPLICATION OF SEALANTS
WET INSTALLATION OF FASTENERS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY FOR SURFACE PREPARATION
AND TEMPORARY PROTECTION OF
METALLIC PARTS
YES
3 - QUALIFIED
NONE
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-05-005
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS05-05-006
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS06-02-002
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS07-01-006
ELECTRICAL BONDING
I+D-P-355
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS09-01-001
Airbus Qualified Special Process List (External Report)
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
MEZCLA Y APLICACIÓN (TIPO 1A+B)
I+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
213187
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
NON-STRUCTURAL ADHESIVE
BONDING
INTEGRAL FUEL TANK SEALING AND
PROTECTION
APPLICATION OF SEALANTS
I+D-P-071
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
BONDING AND GROUNDING
INSTALLATION
ELECTRICAL BONDING
DEGREASING WITH STABILIZED
CLEANING WITH LIQUID NON
I+D-P-009
ORGANIC SOLVENTS IN VAPOUR
AQUEOUS AGENTS IN VAPOUR PHASE
PHASE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 5 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS09-01-002
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS09-01-002
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS09-01-011
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS09-02-004
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
ALKALINE DEGREASING
ALKALINE ETCHING OF ALUMINIUM
ALLOYS - BASIC
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
I+D-P-009
DEGREASING WITH STABILIZED
ORGANIC SOLVENTS IN VAPOUR
PHASE
NO
3 - QUALIFIED
NONE
I+D-P-147
MANUAL CLEANING WITH SOLVENTS
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
MEZCLA Y APLICACIÓN (TIPO 1A+B)
I+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
CLEANING AND PICKLING OF
ALUMINIUM AND ITS ALLOYS
CLEANING AND PICKLING OF
ALUMINIUM AND ITS ALLOYS
I+D-P-072
I+D-P-072
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS09-02-004
ALKALINE ETCHING OF ALUMINIUM
ALLOYS - BASIC
I+D-P-090
CLEANING AND PICKLING OF
TITANIUM AND TITANIUM ALLOYS
NO
3 - QUALIFIED
213187
ACATEC SL
ARGANDA DEL REY
Spain
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
I+D-P-090
CLEANING AND PICKLING OF
TITANIUM AND TITANIUM ALLOYS
YES
3 - QUALIFIED
NONE
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
RESTRICTED TO ALUMINIUM ALLOYS
AND STAINLESS STEEL UNTIL AIPI0902-006 PUBLICATION (BATHS
CHROMFREE USED ACCORDING I+DP038)
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
NA
NOT APPLICABLE
YES
3 - QUALIFIED
HARDNESS APPLICABLE ONLY TO
THICKNESS >0,66 MM NAD METHOD
ROCKWELL
AITM6-9004
INSPECTION FOR CONFIRMATION OF
THE ANODISING PROCESS (BASED
UPON MEASUREMENT OF SURFACE
RESISTANCE)
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
213187
213187
213187
ACATEC SL
ACATEC SL
ACATEC SL
ARGANDA DEL REY
ARGANDA DEL REY
ARGANDA DEL REY
Spain
Spain
Spain
213187
ACATEC SL
ARGANDA DEL REY
Spain
I+D-E-137
PENETRANT INSPECTION PROCESS
I+D-E-137
PENETRANT INSPECTION PROCESS
NO
3 - QUALIFIED
213187
ACATEC SL
ARGANDA DEL REY
Spain
I+D-E-140
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
213187
ACATEC SL
ARGANDA DEL REY
Spain
I+D-P-060
PAINT (GENERAL SPECIFICATION)
I+D-P-060
PAINT (GENERAL SPECIFICATION)
YES
3 - QUALIFIED
213187
ACATEC SL
ARGANDA DEL REY
Spain
I+D-P-146
APPLICATION OF SEALANTS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
RESTRICTED TO ALUMINIUM ALLOYS
AND STAINLESS STEEL UNTIL AIPI0902-006 PUBLICATION (BATHS
CHROMFREE USED ACCORDING I+DP038)
HARDNESS APPLICABLE ONLY TO
THICKNESS >0,66 MM NAD METHOD
ROCKWELL
ONLY THE PROCESS OF APPLCATION
OF ORGANIC FINISHES ON LIGHT
ALLOY IS CERTIFICATED.
NONE
213187
ACATEC SL
ARGANDA DEL REY
Spain
I+D-P-202
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
I+D-P-202
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
YES
3 - QUALIFIED
MEZCLA Y APLICACIÓN (TIPO 1A+B)
I+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
133961
ACB
NANTES CEDEX 3
France
ADET0064
ALUMINIUM ALLOYS SUPERPLASTIC
FORMING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF42-09-STQ-07IP2-120-A0)
TBD
3 - QUALIFIED
CLASSE FONCTIONNELLE
2 S ET 3 + PIÈCE F531 20072 200
133961
ACB
NANTES CEDEX 3
France
ADET0161
SUPERPLASTIC FORMING OF
TITANIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF43-06-STQ-08-IP2-120-A0)
TBD
3 - QUALIFIED
NONE
133961
ACB
NANTES CEDEX 3
France
ADET0239
NA
NOT APPLICABLE
TBD
3 - QUALIFIED
133961
ACB
NANTES CEDEX 3
France
AIPS01-02-003
YES
3 - QUALIFIED
133961
ACB
NANTES CEDEX 3
France
AIPS01-02-008
YES
3 - QUALIFIED
NONE
133961
ACB
NANTES CEDEX 3
France
AIPS01-02-017
YES
3 - QUALIFIED
NONE
133961
ACB
NANTES CEDEX 3
France
AIPS03-10-008
YES
3 - QUALIFIED
NONE
299531
ACE GMBH
HAGNAU
Germany
AIPS01-02-008
299531
ACE GMBH
HAGNAU
Germany
AIPS01-02-017
299531
ACE GMBH
HAGNAU
Germany
AIPS01-02-022
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
LIMITED TO MANUFACTURING OF A350
WINDOW FRAMES ONLY
LIMITED TO MANUFACTURING OF A350
WINDOW FRAMES ONLY
LIMITED TO MANUFACTURING OF A350
WINDOW FRAMES ONLY
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
LIMITED TO MANUFACTURING OF
A350XWB WINDOW FRAMES ONLY
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
LIMITED TO MANUFACTURING OF A350
WINDOW FRAMES ONLY
LIMITED TO MANUFACTURING OF A350
WINDOW FRAMES ONLY
HOT FORMING OF TITANIUM AND ITS
ALLOYS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
SUPERPLASTIC FORMING OF
TITANIUM ALLOYS
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-003
AIPI01-02-008
AIPI01-02-017
AIPI03-10-008
AIPI01-02-008
AIPI01-02-017
AIPI01-02-022
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
SUPERPLASTIC FORMING OF
TITANIUM ALLOYS
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLING THREADED CYLINDRICAL
FASTENERS
YES
YES
YES
299531
ACE GMBH
HAGNAU
Germany
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
299531
ACE GMBH
HAGNAU
Germany
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
299531
ACE GMBH
HAGNAU
Germany
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
Airbus Qualified Special Process List (External Report)
AIPI03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
YES
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
POUR LES PRESSES HF « FCC 80T » &
« FSP 150T »
PROGRAMME DE VALIDATION
PERÇAGE PEAT14-152TVE ISS00
2015-02-02 - Page 6 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
299531
ACE GMBH
HAGNAU
Germany
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
LIMITED TO MANUFACTURING OF A350
WINDOW FRAMES ONLY
299531
ACE GMBH
HAGNAU
Germany
AITM6-3004
VISUAL INSPECTION
NA
NOT APPLICABLE
YES
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-30-0032
80-T-30-0032
YES
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-30-9910
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-34-3000
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-34-3001
YES
3 - QUALIFIED
NONE
301979
301979
301979
ACITURRI ASSEMBLY SA
ACITURRI ASSEMBLY SA
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
ALCALA DE GUADAIRA
ALCALA DE GUADAIRA
Spain
Spain
Spain
80-T-34-3050
80-T-34-5803
80-T-34-5815
YES
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-34-5817
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-34-5822
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-34-9600
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-35-1101
YES
3 - QUALIFIED
JUST BRUSH APPLICATION ACCEPTED
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-35-5218
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
80-T-39-0118
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
I+D-L-113
NO
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-117
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
I+D-P-202
YES
3 - QUALIFIED
ONLY VALID FOR METHOD TYPE I.
HANDLE APPLICATION WITH BRUSH
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS05-02-009
YES
3 - QUALIFIED
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-393
MACHINING OF FRP COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
TIGHTENING OF SCREWS AND NUTS
WET INSTALLATION OF FASTENERS
INSTALLATION OF HI-LOKS
INSTALLATION OF CLOSE-TOLERANCE
BOLTS (HI-LITE, VERI-LITE)
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
APPLICATION OF SEALING
COMPOUNDS
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
APPLICATION OF GAP FILLERS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
STEEL AND TITANIUM HI-LOK
FASTENERS
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
PAINT (GENERAL SPECIFICATION)
FREEZING, REFRIGERATION STORAGE
AND DEFREEZING OF POLYSULFIDE
SEALANTS
LIMITED TO MANUFACTURING OF A350
WINDOW FRAMES ONLY
NONE
301979
MACHINING OF FRP COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
TIGHTENING OF SCREWS AND NUTS
WET INSTALLATION OF FASTENERS
INSTALLATION OF HI-LOKS
INSTALLATION OF CLOSE-TOLERANCE
BOLTS (HI-LITE, VERI-LITE)
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
APPLICATION OF SEALING
COMPOUNDS
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
APPLICATION OF GAP FILLERS
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
3 - QUALIFIED
YES
3 - QUALIFIED
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS05-05-003
I+D-P-186
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
YES
3 - QUALIFIED
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
AIPS05-05-004
YES
3 - QUALIFIED
301979
ACITURRI ASSEMBLY SA
ALCALA DE GUADAIRA
Spain
I+D-P-355
YES
3 - QUALIFIED
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
80-T-30-0032
YES
3 - QUALIFIED
NONE
NO VALID FOR FREEZING PROCESS,
ONLY VALID FOR REFRIGERATION
AND DEFREEZING PROCESSES
NO VALID FOR MIXING PROCESS,
ONLY VALID FOR APPLICATION
ONLY VALID WITH MATERIAL Z12.402
AND FOR P/N'S MS21069L4 AND
MS20426AD3
NONE
ONLY VALID FOR P/N'S MS21069L4 AND
MS20426AD3
NA
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
80-T-30-9910
YES
3 - QUALIFIED
NA
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
80-T-30-9910
YES
3 - QUALIFIED
NA
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
80-T-31-2950
YES
3 - QUALIFIED
NA
291914
291914
291914
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
TRES CANTOS
TRES CANTOS
TRES CANTOS
TRES CANTOS
Spain
Spain
Spain
Spain
80-T-34-3000
80-T-34-3014
80-T-34-5803
80-T-34-5815
YES
NO
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NA
NA
NA
NA
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
80-T-34-5817
YES
3 - QUALIFIED
NA
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
80-T-34-5822
YES
3 - QUALIFIED
NA
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
80-T-34-9600
YES
3 - QUALIFIED
NA
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
80-T-35-0014
NO
3 - QUALIFIED
NA
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
80-T-35-5024
TBD
3 - QUALIFIED
NA
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
80-T-35-5218
YES
3 - QUALIFIED
NA
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
80-T-35-5801
NO
3 - QUALIFIED
NA
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
80-T-35-9030
TBD
3 - QUALIFIED
NA
Airbus Qualified Special Process List (External Report)
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
BONDING AND GROUNDING
INSTALLATION
MACHINING OF FRP COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
INSTALLATION OF ANCHOR NUTS
SAFETYING WITH SPLIT PINS
WET INSTALLATION OF FASTENERS
INSTALLATION OF HI-LOKS
INSTALLATION OF CLOSE-TOLERANCE
BOLTS (HI-LITE, VERI-LITE)
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
COATING WITH TWO-COMPONENT
PRIMER, EP-BASED, CHROMATE FREE
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
TREATMENT WITH SYNTHETIC
LUBRICANTS
APPLICATION OF FILLERS
80-T-30-9910
80-T-34-3000
80-T-34-3001
80-T-34-3050
80-T-34-5803
80-T-34-5815
80-T-34-5817
80-T-34-5822
80-T-34-9600
80-T-35-1101
80-T-35-5218
80-T-39-0118
I+D-P-064
I+D-P-060
I+D-P-146
APPLICATION OF SEALANTS
BONDING AND GROUNDING
INSTALLATION
MACHINING OF FRP COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
I+D-P-355
80-T-30-0032
80-T-30-9910
80-T-30-9910
80-T-31-2950
80-T-34-3000
80-T-34-3014
80-T-34-5803
80-T-34-5815
80-T-34-5817
80-T-34-5822
80-T-34-9600
80-T-35-0014
80-T-35-5024
80-T-35-5218
80-T-35-5801
80-T-35-9030
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
INSTALLATION OF ANCHOR NUTS
SAFETYING WITH SPLIT PINS
WET INSTALLATION OF FASTENERS
INSTALLATION OF HI-LOKS
INSTALLATION OF CLOSE-TOLERANCE
BOLTS (HI-LITE, VERI-LITE)
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
COATING WITH TWO-COMPONENT
PRIMER, EP-BASED, CHROMATE FREE
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
TREATMENT WITH SYNTHETIC
LUBRICANTS
APPLICATION OF FILLERS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 7 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
80-T-35-9120
291914
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
TRES CANTOS
TRES CANTOS
Spain
Spain
80-T-39-0118
80-T-40-3312
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0053
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0082
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0092
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0095
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0120
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0134
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0168
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0177
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
ADET0184
244655
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
BOECILLO
TRES CANTOS
Spain
Spain
Spain
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
Title (PS)
Ref. No. (PI)
ADET0187
AIPS01-01-004
AIPS01-01-004
COATING WITH PAINTS AND
VARNISHES, GENERAL
APPLICATION OF GAP FILLERS
ELECTRICAL BONDING
HARMONIZATION OF SURFACE
CONDITIONS ON PAINTED COMPOSITE
COMPONENTS CABIN INTERIOR NOT
CONSIDERED
APPLICATION OF SEALANTS
PAINTING FOR DETAIL PARTS IN
COMPOSITE MATERIALS ( EXCEPT
FURNISHING CABIN INTERIOR )
ASSEMBLY APPLYING A FILLER RESIN
MANUFACTURE OF MONOLITHIC
ELEMENTS IN CARBON PREPREGS
WITH EPOXY RESIN 180°C
INSTALLATION OF BLIND FASTENERS
HOT FORMING OF ELEMENTS IN
CARBON PREPREGS WITH EPOXY
RESIN 180°C
DRILLING, BORING, COUNTERSUNK
FOR CARBON COMPOSITES OR
CARBON COMPOSITES / METALLIC
STACKINKS
MILLING AND EDGING FOR CARBON
COMPOSITES
WET INSTALLATION OF FASTENERS
INSTALLATION OF SOLID RIVETS
INSTALLATION OF SOLID RIVETS
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
I+D-L-113
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
Couple qualification Status
Title (PI)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NA
YES
NO
3 - QUALIFIED
3 - QUALIFIED
NA
NA
80-T-39-0118
80-T-40-3312
COATING WITH PAINTS AND
VARNISHES, GENERAL
APPLICATION OF GAP FILLERS
ELECTRICAL BONDING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
MANUAL DRILLING ONLY
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
AIPI01-01-004
AIPI01-01-004
NOT APPLICABLE
INSTALLATION OF SOLID RIVETS
INSTALLATION OF SOLID RIVETS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
TBD
NO
NO
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
NO
3 - QUALIFIED
NONE
80-T-35-9120
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
ONLY FOR MANUAL DRILLING. NO
COUPONS FOR DRILLING
CALIBRATION ACCORDING TO AIPI0102-005, SEE POINT 2.9 ,
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
NONE
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS01-02-005
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS01-02-008
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS01-02-008
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS01-02-017
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS01-02-017
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS01-02-017
AIPI01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS01-03-004
AIPI01-03-004
INSTALLATION OF HELICAL THREADED
INSERTS
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS02-02-006
I+D-P-209
COLD WORKING OF HOLES
YES
3 - QUALIFIED
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
AIPS02-05-001
AIPS02-05-001
AIPI02-05-001
AIPI02-05-001
CHEMICAL CONVERSION COATING
CHEMICAL CONVERSION COATING
YES
YES
3 - QUALIFIED
3 - QUALIFIED
ONLY VALID FOR SPLIT MANDREL
PROCESS
LIMITATION FOR TOUCH UP ONLY
LIMITATION FOR TOUCH UP ONLY
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-02-001
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF HELICOIL
THREADED INSERTS
COLD EXPANSION IN METALLICS SPLIT MANDREL PROCESS
CHEMICAL CONVERSION COATING
CHEMICAL CONVERSION COATING
MANUFACTURING OF STRUCTURAL
FIBRE REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
SPECIFICATIONS
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
AIPI01-02-008
AIPI01-02-008
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ONLY TYPE 1A+1B ACCORDING TO
AP3145-E
ONLY TYPE 1A+1B ACCORDING TO
AP3145-E
2015-02-02 - Page 8 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
AIPI03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
YES
3 - QUALIFIED
NONE
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
YES
3 - QUALIFIED
NONE
AIPI03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-06-003
LOCKING USING WIRE
I+D-P-373
WIRE LOCKING OF PARTS
NO
3 - QUALIFIED
244655
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
BOECILLO
TRES CANTOS
Spain
Spain
Spain
AIPS03-06-007
AIPS03-06-009
AIPS03-06-009
AIPI03-06-007
AIPI03-06-009
I+D-P-061
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-07-002
EXTERNAL SWAGED TUBE FITTINGS
SHIM FOR ASSEMBLY
LIQUID SHIMS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
YES
YES
244655
YES
3 - QUALIFIED
NONE
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-07-002
I+D-P-387
MACHINING COMPOSITES
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-07-002
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-07-002
EXTERNAL SWAGED TUBE FITTINGS
SHIMMING FOR ASSEMBLY
SHIMMING FOR ASSEMBLY
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
ONLY VALID FOR WIRE LOCKING OF
PARTS
NONE
NONE
None
I+D-P-387
MACHINING COMPOSITES
YES
3 - QUALIFIED
None
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-07-007
MANUFACTURING OF STRUCTURAL
COMPONENTS FROM
THERMOSETTING PREPREG
MATERIALS
MANUFACTURING
OF STRUCTURAL
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
YES
3 - QUALIFIED
NONE
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-07-007
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
None
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-07-007
YES
3 - QUALIFIED
PREPEG/ ADHESIVE BONDING
(AS7118/1)
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-07-019
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
COMPONENTS FROM
THERMOSETTING PREPREG
MATERIALS
MANUFACTURING
OF STRUCTURAL
COMPONENTS FROM
THERMOSETTING PREPREG
MATERIALS
FORMING OF THERMOSET PREPREG
MATERIALS
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS03-08-003
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS05-01-001
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
TRES CANTOS
Spain
291914
ACITURRI COMPOSITES SLU
Airbus Qualified Special Process List (External Report)
AIPI03-07-002
I+D-P-233
AIPI03-07-019
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
FORMING OF THERMOSET PREPREG
MATERIALS
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
I+D-P-412
REPARACION DE ESTRUCTURAS
FABRICADAS CON MATERIALES
COMPUESTOS (LAMINADOS Y
SANDWICH)
YES
3 - QUALIFIED
None
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
YES
3 - QUALIFIED
NONE
I+D-P-412
REPARACION DE ESTRUCTURAS
FABRICADAS CON MATERIALES
COMPUESTOS (LAMINADOS Y
SANDWICH)
YES
3 - QUALIFIED
None
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 9 of 876
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(2-021A-244655-AE)
PAINTING OF COMPOSITE DETAIL
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-358
PARTS
PAINT SYSTEMS FOR METALLIC
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-064
DETAIL PARTS AND ASSEMBLIES
SUBCONTRACTOR (S/C) PROCESS
APPLICATION OF EXTERNAL PAINT
AIPS05-02-003
NO_AIRBUS_PI
INSTRUCTION
SYSTEMS
(2-021J-244655-AE)
APPLICATION OF STRUCTURAL
APPLICATION OF STRUCTURAL
AIPS05-02-009
AIPI05-02-009
PAINTS
PAINTS
APPLICATION
OF STRUCTURAL
APPLICATION
OF STRUCTURAL
AIPS05-02-009
AIPI05-02-009
PAINTS
PAINTS
APPLICATION OF STRUCTURAL
PAINT SYSTEMS FOR METALLIC
AIPS05-02-009
I+D-P-064
PAINTS
DETAIL PARTS AND ASSEMBLIES
REWORK OF PAINTS ON METALLIC
REWORK OF PAINTS ON METALLIC
AIPS05-02-011
AIPI05-02-011
AND NON-METALLIC STRUCTURAL
AND NON-METALLIC STRUCTURAL
PARTS ON METALLIC
PARTS ON METALLIC
REWORK OF PAINTS
REWORK OF PAINTS
AIPS05-02-011
AIPI05-02-011
AND NON-METALLIC STRUCTURAL
AND NON-METALLIC STRUCTURAL
PARTS
PARTS
Uncontrolled copy. Confirm
lastest qualification status through www.airbus.com.
APPLICATION OF BASIC PRIMER
NO_AIRBUS_PI
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NONE
NONE
FUEL TANK SEALINGI+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
AIPS05-05-001
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
SEALING OF AIRCRAFT STRUCTURE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-146
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS05-05-003
YES
3 - QUALIFIED
NONE
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
AIPS05-05-004
AIPS05-05-004
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
WET INSTALLATION OF FASTENERS
YES
YES
3 - QUALIFIED
3 - QUALIFIED
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
NONE
NONE
FUEL TANK SEALINGI+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
I+D-P-146
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
FUEL TANK SEALINGI+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
I+D-P-146
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
FUEL TANK SEALINGI+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
FUEL TANK SEALINGI+D-P-146
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
AIPI05-05-004
AIPI05-05-004
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
WET INSTALLATION OF FASTENERS
I+D-P-146
APPLICATION OF SEALANTS
AIPI05-05-003
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS05-05-005
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
I+D-P-146
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(2-13E-244655-AE)
YES
3 - QUALIFIED
NONE
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NONE
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NONE
291914
244655
244655
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
TRES CANTOS
BOECILLO
BOECILLO
Spain
Spain
Spain
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
AIPI06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
AIPI06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
YES
3 - QUALIFIED
NONE
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
AIPI06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
YES
3 - QUALIFIED
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AIPS06-02-006
YES
3 - QUALIFIED
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
AIPS07-01-006
AIPS07-01-006
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS09-04-001
YES
3 - QUALIFIED
NONE
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
AITM6-3004
AITM6-3004
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AITM6-4002
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AITM6-4005
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AITM6-4005
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AITM6-4010
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
AITM6-4011
AITM6-4011
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AITM6-4012
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AITM6-4014
Airbus Qualified Special Process List (External Report)
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
ELECTRICAL BONDING
ELECTRICAL BONDING
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
VISUAL INSPECTION
VISUAL INSPECTION
ULTRASONIC THROUGH
TRANSMISSION INSPECTION OF FIBRE
COMPOSITE
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
ULTRASONIC
PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
INSPECTION OF FIBRE COMPOSITES
BY ULTRASONIC PHASED ARRAY
TECHNIQUE
ULTRASONIC INSPECTION
ULTRASONIC INSPECTION
ULTRASONIC PULSE-ECHO
INSPECTION OF GLASS FIBRE
REINFORCED PLASTICS
THICKNESS MEASUREMENT OF FIBER
COMPOSITES BY ULTRASONIC PULSEECHO TECHNIQUE
NA
NA
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
ELECTRICAL BONDING
ELECTRICAL BONDING
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
NOT APPLICABLE
NOT APPLICABLE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
N/A
NA
NOT APPLICABLE
YES
3 - QUALIFIED
N/A
NA
NOT APPLICABLE
YES
3 - QUALIFIED
N/A
NA
NA
NOT APPLICABLE
NOT APPLICABLE
NO
NO
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
AIPI06-02-006
AIPI07-01-006
AIPI07-01-006
AIPI09-04-001
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NADCAP 126756
2015-02-02 - Page 10 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AITM6-4021
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AITM6-4021
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AITM6-4022
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AITM6-4022
244655
291914
ACITURRI COMPOSITES SLU
ACITURRI COMPOSITES SLU
BOECILLO
TRES CANTOS
Spain
Spain
AITM6-5003
AITM6-5003
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AITM6-7002
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
AITM6-9003
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-E-138
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
I+D-E-275
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-E-275
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
I+D-E-280
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-E-280
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-E-282
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
I+D-E-295
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-E-295
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-E-336
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
I+D-E-338
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-E-338
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
I+D-P-146
291914
ACITURRI COMPOSITES SLU
TRES CANTOS
Spain
I+D-P-231
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
IGC04-63-105
235726
ACITURRI METALLIC PARTS
SLU
MIRANDA DE EBRO
Spain
AIPS01-02-003
235726
ACITURRI METALLIC PARTS
SLU
235726
235726
235726
235726
235726
235726
235726
235726
235726
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
Airbus Qualified Special Process List (External Report)
Title (PS)
REFLECTOR PLATE ULTRASONIC
INSPECTION
REFLECTOR PLATE ULTRASONIC
INSPECTION
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
ULTRASONIC
PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
TAP TEST
TAP TEST
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
LEAK TEST FOR SANDWICH
STRUCTURES
RADIOGRAPHIC INSPECTION
NON - DESTRUCTIVE INSPECTION OF
CARBON FIBER COMPOSITE PARTS
NON - DESTRUCTIVE INSPECTION OF
CARBON FIBER COMPOSITE PARTS
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
REFERENCE STANDARD FOR NONDESTRUCTIVE INSPECTION OF
CARBON FIBRE COMPOSITES
REFERENCE STANDARD FOR NONDESTRUCTIVE INSPECTION OF
CARBON FIBRE COMPOSITES
LEAK TESTING IN SANDWICH
STRUCTURES
REFLECTOR - PLATE ULTRASONIC
INSPECTION OF CARBON FIBER
COMPOSITE ELEMENTS
MIRANDA DE EBRO
Spain
AIPS01-02-005
MIRANDA DE EBRO
Spain
AIPS01-02-008
MIRANDA DE EBRO
Spain
AIPS01-02-013
MIRANDA DE EBRO
Spain
AIPS01-02-017
MIRANDA DE EBRO
Spain
AIPS01-02-019
MIRANDA DE EBRO
Spain
AIPS01-02-022
MIRANDA DE EBRO
Spain
AIPS01-03-003
MIRANDA DE EBRO
Spain
AIPS01-04-008
MIRANDA DE EBRO
Spain
AIPS02-01-001
MIRANDA DE EBRO
Spain
AIPS02-01-003
REFLECTOR - PLATE ULTRASONIC
INSPECTION OF CARBON FIBER
COMPOSITE ELEMENTS
APPLICATION OF SEALANTS
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
PERIODIC INSPECTION OF HEAT
TREATMENT AND POLYMERIZATION
INSTALLATIONS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF INSERTS IN NON
METALLICS
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
NA
NOT APPLICABLE
YES
3 - QUALIFIED
N/A
AITM6-4021
REFLECTOR PLATE ULTRASONIC
INSPECTION
YES
3 - QUALIFIED
N/A
NA
NOT APPLICABLE
YES
3 - QUALIFIED
A350
NA
NOT APPLICABLE
YES
3 - QUALIFIED
A350
NA
AITM6-5003
NOT APPLICABLE
TAP TEST
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
INSPECCIÓN POR FLUOROSCOPIA
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
None
I+D-E-138
LEAK TEST FOR SANDWICH
STRUCTURES
RADIOGRAPHIC INSPECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
I+D-E-275
NON - DESTRUCTIVE INSPECTION OF
CARBON FIBER COMPOSITE PARTS
NO
3 - QUALIFIED
None
NA
NOT APPLICABLE
NO
3 - QUALIFIED
THE USEFUL INSPECTION SURFACE IS
3M2 WITH THE CURRENT SOFTWARE
OF AUTHOMATIC EQUIPMENT
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
None
YES
3 - QUALIFIED
None
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
LIMITAION TO A350 SECTION 19FIT
HOLE SINGLE PARTS. (SWINGLES
PARTS)
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
AITM6-9003
I+D-E-280
I+D-E-282
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
NA
I+D-E-295
I+D-E-336
I+D-E-338
I+D-E-338
I+D-P-146
I+D-P-231
IGC04-63-105
AIPI01-02-003
AIPI01-02-005
AIPI01-02-008
AIPI01-02-013
AIPI01-02-017
AIPI01-02-019
AIPI01-02-022
AIPI01-03-003
NOT APPLICABLE
REFERENCE STANDARD FOR NONDESTRUCTIVE INSPECTION OF
CARBON FIBRE COMPOSITES
LEAK TESTING IN SANDWICH
STRUCTURES
REFLECTOR - PLATE ULTRASONIC
INSPECTION OF CARBON FIBER
COMPOSITE ELEMENTS
REFLECTOR - PLATE ULTRASONIC
INSPECTION OF CARBON FIBER
COMPOSITE ELEMENTS
APPLICATION OF SEALANTS
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
PERIODIC INSPECTION OF HEAT
TREATMENT AND POLYMERIZATION
INSTALLATIONS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
INSTALLING THREADED CYLINDRICAL
FASTENERS
INSTALLATION OF INSERTS IN NONMETALLIC
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
NONE
I+D-P-213
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
YES
3 - QUALIFIED
None
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 11 of 876
External Shop
ARP-ID
235726
235726
235726
235726
235726
Company Name
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
Title (PS)
MIRANDA DE EBRO
Spain
AIPS02-01-004
MIRANDA DE EBRO
Spain
AIPS02-01-004
MIRANDA DE EBRO
Spain
AIPS02-02-005
MIRANDA DE EBRO
Spain
MIRANDA DE EBRO
Ref. No. (PI)
Couple qualification Status
Title (PI)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY TYPE 1 (COLORED)
ANODIZING OF TITANIUM AND ITS
ALLOYS
ANODIZING OF TITANIUM AND ITS
ALLOYS
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
AIPI02-01-004
AIPS02-05-001
CHEMICAL CONVERSION COATING
I+D-P-202
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
NONE
I+D-P-048
AIPI02-02-005
ANODIZING OF TITANIUM AND ITS
ALLOYS
ANODIZING OF TITANIUM AND ITS
ALLOYS
COLD EXPANSION IN METALLIC
MATERIALS SPLIT SLEEVE PROCESS
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
235726
ACITURRI METALLIC PARTS
SLU
MIRANDA DE EBRO
Spain
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
AIPI03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
YES
3 - QUALIFIED
NONE
235726
ACITURRI METALLIC PARTS
SLU
MIRANDA DE EBRO
Spain
AIPS03-03-012
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
AIPI03-03-012
INSTALLATION OF BEARINGS,
SPHERICAL BEARINGS AND BUSHES
BY SWAGING
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
AIPI03-06-009
SHIM FOR ASSEMBLY
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-064
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-358
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS05-02-011
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS05-05-001
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
MIRANDA DE EBRO
235726
235726
235726
235726
235726
235726
235726
235726
235726
235726
235726
235726
235726
235726
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
ACITURRI METALLIC PARTS
SLU
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
PAINTING OF COMPOSITE DETAIL
PARTS
PAINTING OF COMPOSITE DETAIL
PARTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
AIPI05-02-009
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
AIPI06-02-002
NON STRUCTURAL ADHESIVE
BONDING
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
INTERNAL QUALIFICATION, NEW
SPECIAL PROCESS
MIRANDA DE EBRO
Spain
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
AIPI09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
YES
3 - QUALIFIED
NONE
MIRANDA DE EBRO
Spain
AITM6-1001
PENETRANT TESTING
AITM6-1001
PENETRANT TESTING
YES
3 - QUALIFIED
NONE
I+D-P-358
I+D-P-064
AIPI05-02-011
AIPI05-05-001
235726
ACITURRI METALLIC PARTS
SLU
MIRANDA DE EBRO
Spain
AITM6-9008
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
235726
ACITURRI METALLIC PARTS
SLU
MIRANDA DE EBRO
Spain
I+D-E-137
PENETRANT INSPECTION PROCESS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
235726
ACITURRI METALLIC PARTS
SLU
MIRANDA DE EBRO
Spain
I+D-E-140
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NOTTINGHAM
United Kingdom
ABP1-1022
HARD ANODISING OF ALUMINIUM
ABP1-1022
HARD ANODISING OF ALUMINIUM
YES
3 - QUALIFIED
NONE
NOTTINGHAM
United Kingdom
ABP1-1023
YES
3 - QUALIFIED
NONE
NOTTINGHAM
United Kingdom
ABP1-1024
YES
3 - QUALIFIED
NONE
NOTTINGHAM
United Kingdom
ABP1-5057
YES
3 - QUALIFIED
NONE
NOTTINGHAM
United Kingdom
ABP4-1121
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
241054
241054
241054
241054
241054
ACORN SURFACE
TECHNOLOGY
ACORN SURFACE
TECHNOLOGY
ACORN SURFACE
TECHNOLOGY
ACORN SURFACE
TECHNOLOGY
ACORN SURFACE
TECHNOLOGY
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
ABP4-1123
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
ABP4-2124
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
ABP4-2126
241054
ACORN SURFACE
TECHNOLOGY
Airbus Qualified Special Process List (External Report)
NOTTINGHAM
United Kingdom
ABP4-2127
CHROMIC ACID ANODISING OF
ALUMINIUM
SULPHURIC ACID ANODISING OF
ALUMINIUM
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
ABP1-1023
ABP1-1024
ABP1-5057
ABP4-1121
ABP4-1123
ABP4-2124
ABP4-2126
ABP4-2127
CHROMIC ACID ANODISING OF
ALUMINIUM
SULPHURIC ACID ANODISING OF
ALUMINIUM
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 12 of 876
External Shop
ARP-ID
Company Name
241054
ACORN SURFACE
TECHNOLOGY
241054
241054
241054
ACORN SURFACE
TECHNOLOGY
ACORN SURFACE
TECHNOLOGY
ACORN SURFACE
TECHNOLOGY
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
Title (PS)
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
NOTTINGHAM
United Kingdom
ABP4-2128
NOTTINGHAM
United Kingdom
ABP4-2130
NOTTINGHAM
United Kingdom
ABP4-4140
NOTTINGHAM
United Kingdom
ABP6-5230
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
STRIPPING OF PAINTS BY CHEMICAL
METHODS
TESTING BY PENETRANT FLAW
DETECTION
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
ABP1-1024
SULPHURIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1024 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS02-01-005
HARD ANODIZING OF ALUMINIUM
ALLOYS
ABP1-1022
HARD ANODISING OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1022 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS02-03-006
ION VAPOUR DEPOSITION (IVD) OF
ALUMINIUM
AIPI02-03-006
ALUMINIUM COATING BY ION VAPOUR
DEPOSITION (IVD)
YES
3 - QUALIFIED
NONE
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NOTTINGHAM
United Kingdom
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
241054
ACORN SURFACE
TECHNOLOGY
NOTTINGHAM
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
298286
ACROMIL
CITY OF INDUSTRY
USA
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
298286
ACROMIL
CITY OF INDUSTRY
USA
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
AIPI01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
YES
3 - QUALIFIED
298286
ACROMIL
CITY OF INDUSTRY
USA
AIPS03-03-012
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
AIPI03-03-012
INSTALLATION OF BEARINGS,
SPHERICAL BEARINGS AND BUSHES
BY SWAGING
YES
3 - QUALIFIED
298286
ACROMIL
CITY OF INDUSTRY
USA
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
298286
ACROMIL
CITY OF INDUSTRY
USA
AIPS05-05-004
AIPI05-05-004
3 - QUALIFIED
ACTION INDUSTRIES
CORONA
USA
ABP1-4327
TBD
3 - QUALIFIED
NONE
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-1065
YES
3 - QUALIFIED
NONE
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-1071
TBD
3 - QUALIFIED
NONE
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-1072
TBD
3 - QUALIFIED
NONE
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-2083
WET INSTALLATION OF FASTENERS
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND NUT PLATE
RIVETS
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
YES
240852
WET INSTALLATION OF FASTENERS
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND NUT PLATE
RIVETS
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
ABP1-4327
ABP2-1065
ABP2-1071
ABP2-1072
ABP2-2083
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NONE
LIMITTED TO A350 PROGRAM
BRACKETS AND MINOR ASSEMBLIES
ONLY
NONE
LIMITTED FOR NUT PLATE
ASSEMBLIES ONLY
LIMITTED TO A350 PROGRAM NUT
PLATE ASSEMBLIES ONLY
2015-02-02 - Page 13 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2083 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPI01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
YES
3 - QUALIFIED
NONE
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
USA
AIPS01-02-014
INSTALLATION OF COLD EXPANDED
RETAINERS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CORONA
USA
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ACTION INDUSTRIES
CORONA
USA
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240852
ACTION INDUSTRIES
CORONA
USA
AIPS02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240852
ACTION INDUSTRIES
CORONA
USA
AIPS02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
AIPI02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
NO
3 - QUALIFIED
NONE
240852
ACTION INDUSTRIES
CORONA
USA
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240852
ACTION INDUSTRIES
CORONA
USA
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240852
ACTION INDUSTRIES
CORONA
USA
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
NO
3 - QUALIFIED
NONE
240852
ACTION INDUSTRIES
CORONA
USA
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
AIPI03-11-003
NO
3 - QUALIFIED
NONE
240852
ACTION INDUSTRIES
CORONA
USA
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240852
ACTION INDUSTRIES
CORONA
USA
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240852
ACTION INDUSTRIES
CORONA
USA
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240852
ACTION INDUSTRIES
CORONA
USA
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
240852
240852
ACTION INDUSTRIES
ACTION INDUSTRIES
CORONA
CORONA
USA
USA
AIPS08-02-003
AIPS08-03-002
NO
NO
3 - QUALIFIED
3 - QUALIFIED
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
NONE
240852
ACTION INDUSTRIES
CORONA
USA
AIPS09-01-002
NO
3 - QUALIFIED
NONE
235656
AD METAL SPINNERS LTD
BOURNEMOUTH
United Kingdom
ABP6-3201
TBD
3 - QUALIFIED
NONE
ARP-ID
Company Name
City
Country
Ref. No. (PS)
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-2336
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-3088
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-3092
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-3096
240852
ACTION INDUSTRIES
CORONA
USA
ABP2-3097
240852
ACTION INDUSTRIES
CORONA
USA
ABP4-5142
240852
ACTION INDUSTRIES
CORONA
USA
ABP4-5144
240852
ACTION INDUSTRIES
CORONA
USA
ABP6-3205
240852
ACTION INDUSTRIES
CORONA
USA
ABP6-3211
240852
ACTION INDUSTRIES
CORONA
USA
AIPS01-02-002
INSTALLATION OF TAPER SHANK
BOLTS
ABP2-2083
240852
ACTION INDUSTRIES
CORONA
USA
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
240852
ACTION INDUSTRIES
CORONA
USA
AIPS01-02-003
240852
ACTION INDUSTRIES
CORONA
USA
240852
ACTION INDUSTRIES
CORONA
240852
ACTION INDUSTRIES
240852
Airbus Qualified Special Process List (External Report)
Title (PS)
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLING METALLIC INSERTS (
RIVNUTS )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS BY
SWAGING
IDENTIFICATION BY BAG AND TAG
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
Ref. No. (PI)
ABP2-2336
ABP2-3088
ABP2-3092
ABP2-3096
ABP2-3097
ABP4-5142
ABP4-5144
ABP6-3205
ABP6-3211
AIPI08-02-003
AIPI08-03-002
AIPI09-01-002
ABP6-3201
Title (PI)
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLING METALLIC INSERTS (
RIVNUTS )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS BY
SWAGING
MACHINING METALS BY MECHANICAL
ACTION
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
IDENTIFICATION BY BAG AND TAG
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON AQUEOS
AGENTS
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 14 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
134349
ADEL WIGGINS GROUP
TRANSDIGM INC
LOS ANGELES
USA
80-T-30-4010
MACHINING OF METALLIC
COMPONENTS
80-T-30-4010
MACHINING OF METALLIC
COMPONENTS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION); PFA 09-012-A
134349
ADEL WIGGINS GROUP
TRANSDIGM INC
LOS ANGELES
USA
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
134349
ADEL WIGGINS GROUP
TRANSDIGM INC
LOS ANGELES
USA
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
3 - QUALIFIED
NONE
134349
ADEL WIGGINS GROUP
TRANSDIGM INC
LOS ANGELES
USA
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NO
9 - LIMITED SCOPE (AIPS00-00006)
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)80-T-39-0132 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
134349
ADEL WIGGINS GROUP
TRANSDIGM INC
LOS ANGELES
USA
AIPS08-03-002
302450
ADLER AERONAUTIC S R L
ACERRA
Italy
ADET0175
NORTH BABYLON
USA
ABP1-1023
NORTH BABYLON
USA
ABP4-1121
240855
240855
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
ABP4-1123
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
ABP4-2124
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
ABP4-2126
240855
ADVANCED COATING
TECHNIQUES INC
240855
240855
240855
240855
240855
240855
240855
240855
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
PERMANENT MARKING WITH INK
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
CHROMIC ACID ANODISING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
NORTH BABYLON
USA
ABP4-2128
NORTH BABYLON
USA
ABP4-2130
NORTH BABYLON
USA
ABP4-2131
NORTH BABYLON
USA
ABP4-2133
NORTH BABYLON
USA
ABP4-2361
NORTH BABYLON
USA
ABP4-2364
NORTH BABYLON
USA
ABP4-4140
NORTH BABYLON
USA
ABP6-5230
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
STRIPPING OF PAINTS BY CHEMICAL
METHODS
TESTING BY PENETRANT FLAW
DETECTION
80-T-39-0132
NO_AIRBUS_PI
ABP1-1023
ABP4-1121
ABP4-1123
ABP4-2124
ABP4-2126
ABP4-2130
ABP4-2131
ABP4-2133
ABP4-2361
MARKING WITH INDELIBLE INK
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QFRA/TR/03P/065)
CHROMIC ACID ANODISING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240855
ADVANCED COATING
TECHNIQUES INC
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
NORTH BABYLON
USA
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 15 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NORTH BABYLON
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240855
ADVANCED COATING
TECHNIQUES INC
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY VALID TO CROMIC ANODIZING
TYPE IB
YES
3 - QUALIFIED
THIS PROCESS IS NOT AUTHORIZED
FOR PARTS WITH TSA+SEALING, OR
PARTS WITH ETCHING PRIOR TO
PENETRANT INSPECTION
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NO VALID TO ALLOYS L3132 AND L3751
YES
3 - QUALIFIED
NONE
ARP-ID
Company Name
Ref. No. (PS)
Title (PS)
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
USA
240855
ADVANCED COATING
TECHNIQUES INC
NORTH BABYLON
240855
ADVANCED COATING
TECHNIQUES INC
240855
299378
299378
299378
299378
299378
299378
299378
299378
299378
299378
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
AERCAL AERONAUTICA
CALDERERIA S A
City
Country
NORTH BABYLON
USA
AIPS05-05-003
SANTIPONCE SEVILLA
Spain
AIPS02-01-001
SANTIPONCE SEVILLA
Spain
AIPS02-01-001
SANTIPONCE SEVILLA
Spain
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
I+D-P-416
SANTIPONCE SEVILLA
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
I+D-P-202
SANTIPONCE SEVILLA
Spain
AIPS04-01-001
SANTIPONCE SEVILLA
Spain
AIPS04-01-001
SANTIPONCE SEVILLA
Spain
AIPS05-02-009
SANTIPONCE SEVILLA
Spain
AIPS05-02-009
SANTIPONCE SEVILLA
Spain
AIPS09-01-011
SANTIPONCE SEVILLA
Spain
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
I+D-P-213
I+D-P-213
I+D-P-220
I+D-P-220
I+D-P-064
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
ALUMINIUM AND ALUMINIUM ALLOY
TARTARIC-SULPHURIC ANODISING
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
HEAT TREATMENTS OF ALUMINIUM
ALLOYS
HEAT TREATMENTS OF ALUMINIUM
ALLOYS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
I+D-P-060
PAINT (GENERAL SPECIFICATION)
YES
3 - QUALIFIED
NONE
ALKALINE DEGREASING
I+D-P-072
CLEANING AND PICKLING OF
ALUMINIUM AND ITS ALLOYS
YES
3 - QUALIFIED
NONE
I+D-E-137
PENETRANT INSPECTION PROCESS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
299378
AERCAL AERONAUTICA
CALDERERIA S A
SANTIPONCE SEVILLA
Spain
I+D-E-140
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
299378
AERCAL AERONAUTICA
CALDERERIA S A
SANTIPONCE SEVILLA
Spain
I+D-E-140
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
I+D-E-140
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
NO
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
BERANTEVILLA
Spain
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
AIPI01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
YES
3 - QUALIFIED
ONLY RIVETS WITH PROTRUDING
HEAD AND RIVETS EN6081T AND
ABS0056
NONE
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 16 of 876
294386
294386
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
294386
BERANTEVILLLA SITE
Airbus Qualified Special Process List (External Report)
294386
BERANTEVILLA
Spain
AIPS01-02-005
BERANTEVILLA
Spain
AIPS01-02-006
BERANTEVILLA
Spain
BERANTEVILLA
Spain
BERANTEVILLA
Spain
BERANTEVILLA
Spain
BERANTEVILLA
Spain
BERANTEVILLA
Spain
BERANTEVILLA
Spain
BERANTEVILLA
Spain
INSTALLATION OF LOCKBOLTS PULL
REMACHES DE TITANIO GPL Y LGPL
I+D-P-236
AND STUMP TYPES
LOCKBOLTS
TORQUE TIGHTENING OF SCREWS,
TIGHTENING TORQUES FOR
AIPS01-02-008
AIPI01-02-008
BOLTS AND NUTS
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS AND
AIPS01-02-013
I+D-F-015
BLIND STEEL "HUCK" FASTENERS
BLIND RIVETS ¿PULL-TYPE¿
INSTALLATION OF BLIND BOLTS AND
INSTALLATION OF BLIND BOLTS PULLAIPS01-02-013
AIPI01-02-013
BLIND RIVETS ¿PULL-TYPE¿
TYPE
INSTALLATION OF BLIND BOLTS
INSTALLATION OF BLIND BOLTS
AIPS01-02-015
AIPI01-02-015
THREADED TYPE
THREADED TYPE
GENERAL ASSEMBLY AND
ALUMINIUM ALLOY AND NIOBIUM
AIPS01-02-017
I+D-L-113
INSTALLATION OF FASTENERS
TITANIUM ALLOY SOLID SHANK RIVETS
GENERAL ASSEMBLY AND
GENERAL ASSEMBLY AND
AIPS01-02-017
AIPI01-02-017
INSTALLATION OF FASTENERS
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES, SHRINK
INSTALACION DE CASQUILLOS EN
AIPS01-02-019
I+D-P-366
AND PRESS FIT
MONTAJE CON INTERFERENCIA
INSTALLATION OF BUSHES, SHRINK
INSTALLATION OF BUSHES SHRINK
AIPS01-02-019
AIPI01-02-019
AND PRESS FIT
AND PRESS FIT
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-022
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-364
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS01-03-002
BERANTEVILLA
Spain
AIPS01-03-004
BERANTEVILLA
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
BERANTEVILLA
Spain
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
AIPI03-03-001
294386
294386
294386
294386
294386
294386
294386
294386
294386
294386
294386
294386
294386
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
INSTALLATION OF HELICOIL
THREADED INSERTS
AIPI01-03-002
AIPI01-03-004
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY FOR NON-METALLIC MATERIALS
(FROM AUDIT REPORT)
YES
3 - QUALIFIED
ONLY VALID TO PROCEED
ACCORDING TO MS33537
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
NONE
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
YES
3 - QUALIFIED
NONE
Title (PI)
INSTALLING THREADED CYLINDRICAL
FASTENERS
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTERNERS
WITH ODER WITHOUT ACRES
SLEEVES
INSTALLATION OF HELICAL THREADED
INSERTS
BERANTEVILLA
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
AIPI03-06-009
SHIM FOR ASSEMBLY
YES
3 - QUALIFIED
CURED SHIM THICKNESS
MEASUREMENT WITH CALIPER OR
GAUGES ONLY FOR SMALL AREAS
TOTALLY ACCESIBLE AFTER SHIM
CURED.
BERANTEVILLA
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
I+D-P-061
LIQUID SHIMS
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS03-07-002
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-02-003
I+D-P-060
PAINT (GENERAL SPECIFICATION)
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-02-003
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-02-009
3 - QUALIFIED
NONE
Spain
AIPS05-02-011
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-05-001
I+D-P-146
PAINT (GENERAL SPECIFICATION)
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
APPLICATION OF SEALANTS
YES
BERANTEVILLA
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
ONLY VALID TYPE 1A AND 1B
BERANTEVILLA
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
NONE
APPLICATION OF EXTERNAL PAINT
SYSTEMS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-003
I+D-P-064
AIPI05-02-009
I+D-P-060
AIPI05-02-011
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
I+D-P-186
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NOT OWEN, NOT INFRA RED NOR
AUTOMATIC DOSING MACHINES
YES
3 - QUALIFIED
NONE
294386
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS05-05-005
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS05-05-006
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS06-01-004
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
AIPS06-01-004
BERANTEVILLA
Spain
AIPS06-02-002
BERANTEVILLA
Spain
AIPS06-02-002
BERANTEVILLA
Spain
AIPS06-02-009
ADHESIVE TAPE BONDING
AIPI06-02-009
ADHESIVE TAPE BONDING
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AIPS07-01-006
I+D-P-355
BONDING AND GROUNDING
INSTALLATION
YES
3 - QUALIFIED
NONE
BERANTEVILLA
Spain
AITM6-4022
ELECTRICAL BONDING
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS 130558
294386
294386
294386
294386
294386
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
Airbus Qualified Special Process List (External Report)
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
NON-STRUCTURAL ADHESIVE
BONDING
NON-STRUCTURAL ADHESIVE
BONDING
AIPI05-05-005
AIPI05-05-006
AIPI06-01-004
I+D-P-067
SURFACE PREPARATION FOR NONSTRUCTURAL BONDINGS
AIPI06-02-002
I+D-P-071
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NON STRUCTURAL ADHESIVE
BONDING
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
2015-02-02 - Page 17 of 876
External Shop
ARP-ID
Company Name
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
Process Specification(PS) / Process Instruction (PI)
City
BERANTEVILLA
Country
Spain
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
AITM6-4022
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS 130558
294386
AERNNOVA AEROSPACE S A U
BERANTEVILLLA SITE
BERANTEVILLA
Spain
I+D-E-137
PENETRANT INSPECTION PROCESS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
THIS QUALIFICATION IS LIMITED TO DO
THE INSPECTION AND EVALUATION OF
SURFACE-BREAKING DEFECTS IN
LOCALIZED AREAS, UTILIZING
SOLVENT-REMOVABLE FLUORESCENT
PENETRANTS (TYPE I, METHOD C), ON
NON-POROUS METALLIC PARTS AND
OF NON-METALLIC PARTS.
250404
AERNNOVA AEROSPACE SA
SOCIEDAD UNIPERSONAL
MINANO MAYOR
Spain
AIPS02-02-003
WET BLASTING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(03266-311-1E)
YES
3 - QUALIFIED
NONE
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
ADET0030
STRUCTURAL BOLT TIGHTENING
TORQUES
IPDA71-03
APPL COUPLE SERRAGE
BOULONNERIE STRUCTUR
YES
3 - QUALIFIED
TORQUE VALUES DEFINED ON
DRAWING. LUBRICANT APPLICATION
NOT ALLOWED.
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
294267
294267
294267
294267
294267
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS01-02-005
ILLESCAS
Spain
AIPS01-02-008
ILLESCAS
Spain
AIPS01-02-013
ILLESCAS
Spain
AIPS01-02-017
ILLESCAS
Spain
AIPS01-02-022
ILLESCAS
Spain
AIPS01-02-022
ILLESCAS
Spain
AIPS01-02-022
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-008
AIPI01-02-013
AIPI01-02-017
AIPI01-02-022
I+D-P-117
I+D-P-231
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-364
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
294267
294267
294267
294267
294267
294267
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLING THREADED CYLINDRICAL
FASTENERS
STEEL AND TITANIUM HI-LOK
FASTENERS
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
ILLESCAS
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
AIPI03-06-009
SHIM FOR ASSEMBLY
YES
3 - QUALIFIED
CURER SHIM THICKNESS
MEASUREMENT WITH CALIPER OR
GAUGES ONLY FOR SMALL AREAS
TOTALLY ACCESIBLE AFTER SHIM
CURED
ILLESCAS
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
I+D-P-061
LIQUID SHIMS
YES
3 - QUALIFIED
VALID TO CURING ACCELERATED BY
APPLYING HEAT
ILLESCAS
Spain
AIPS03-07-002
YES
3 - QUALIFIED
NONE
ILLESCAS
Spain
AIPS03-07-019
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
FORMING OF THERMOSET PREPREG
MATERIALS
AIPI03-07-002
AIPI03-07-019
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
FORMING OF THERMOSET PREPREG
MATERIALS
ILLESCAS
Spain
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
ILLESCAS
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
NONE
ILLESCAS
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
TYPE 1A+B
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
I+D-P-186
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
YES
3 - QUALIFIED
ONLY VALID TO AEROGRAPH
APPLICATION FOR MIXING OF 200ML
TO Z12.524
ILLESCAS
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
ILLESCAS
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NONE
AIPI06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
YES
3 - QUALIFIED
NONE
294267
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
AERNNOVA COMPOSITES
ILLESCAS SAU
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 18 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
I+D-P-067
SURFACE PREPARATION FOR NONSTRUCTURAL BONDINGS
YES
3 - QUALIFIED
NONE
AIPI06-02-002
NON STRUCTURAL ADHESIVE
BONDING
YES
3 - QUALIFIED
NONE
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
I+D-P-071
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
YES
3 - QUALIFIED
ONLY VALID TO IDENTIFICATION
LABEL NSA9117-22S WITH Z15.104 &
FOR OTHER NON STRUCTURAL
BONDING WITH Z18.170 & Z17.201
Spain
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
AIPI06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
YES
3 - QUALIFIED
NONE
Spain
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
AITM6-4005
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
3 - QUALIFIED
ULTRASONIC CONTACT HAND-HELD
PULSE-ECHO INSPECTION OF CFRP
LAMINATE STRUCTURES WITH
PARALLEL PLANES AND STRINGERS
INSPECTION OF FIBRE COMPOSITES
BY ULTRASONIC PHASED ARRAY
TECHNIQUE
ARP-ID
Company Name
City
Country
Ref. No. (PS)
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS06-01-004
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AIPS06-02-002
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Couple qualification Status
Spain
Title (PS)
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
NON-STRUCTURAL ADHESIVE
BONDING
NA
NOT APPLICABLE
YES
NA
NOT APPLICABLE
YES
3 - QUALIFIED
INSPECTION OF PARALLEL CFRP
STRUCTURES WITH PARALLEL
PLANES AND STRINGERS WITH:
A)AUTOMATIC FACILITY GEMA;
B)RAPIDSCAN 2D-3D SEMIAUTOMATIC
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS130557
CHROMIUM PASSIVATION OF
CADMIUM - PLATED SURFACES
80-T-35-1107
CHROMIUM PASSIVATION OF
CADMIUM - PLATED SURFACES
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
80-T-35-4200
VACUUM DEPOSISTION OF CADMIUM
80-T-35-4200
VACUUM DEPOSISTION OF CADMIUM
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
Germany
80-T-35-5002
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
80-T-35-5002
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
WISMAR
Germany
80-T-35-5025
COATING WITH TWO - COMPONENT
PRIMER CHROMATE - FREE
80-T-35-5025
COATING WITH TWO - COMPONENT
PRIMER CHROMATE - FREE
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
AERO COATING GMBH
GEWERBEGEBIET REDENTIN
WISMAR
Germany
80-T-35-5106
COATING WITH PUR - BASED TOP
COAT
80-T-35-5106
COATING WITH PUR - BASED TOP
COAT
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-30-4010
NO
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-30-9910
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-32-1000
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-32-1005
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-32-2210
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-32-2310
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-3001
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
YES
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-5814
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-5822
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-6601
REPAIR WELDING INSTRUCTION
80-T-34-6601
REPAIR WELDING INSTRUCTION
TBD
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-8000
BRAZING
80-T-34-8000
BRAZING
YES
134705
AERO FABRICATIONS
Airbus Qualified Special Process List (External Report)
WATNALL
United Kingdom
80-T-34-9032
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AITM6-4010
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AITM6-4014
294267
AERNNOVA COMPOSITES
ILLESCAS SAU
ILLESCAS
Spain
AITM6-4022
134767
AERO COATING GMBH
GEWERBEGEBIET REDENTIN
WISMAR
Germany
80-T-35-1107
134767
AERO COATING GMBH
GEWERBEGEBIET REDENTIN
WISMAR
Germany
134767
AERO COATING GMBH
GEWERBEGEBIET REDENTIN
WISMAR
134767
AERO COATING GMBH
GEWERBEGEBIET REDENTIN
134767
THICKNESS MEASUREMENT OF FIBER
COMPOSITES BY ULTRASONIC PULSEECHO TECHNIQUE
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
MACHINING OF METALLIC
COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
FORMING OF TI AND TI¿ALLOY
SHEETS
MULTI-ROLL BENDING OF ALUMINUM
ANDALUMINUM ALLOY STRINGER
SECTIONS
PRODUCTION OF JOGGLES AT ALSECTIONS
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF SOLID ALUMINUM
RIVETS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
80-T-30-4010
80-T-30-9910
80-T-32-1000
80-T-32-1005
80-T-32-2210
80-T-32-2310
80-T-34-3001
80-T-34-5814
80-T-34-5822
MACHINING OF METALLIC
COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
FORMING OF TI AND TI¿ALLOY
SHEETS
MULTI-ROLL BENDING OF ALUMINUM
ANDALUMINUM ALLOY STRINGER
SECTIONS
PRODUCTION OF JOGGLES AT ALSECTIONS
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF SOLID ALUMINUM
RIVETS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
BONDING OF NON-STRUCTURAL
BONDING OF NON-STRUCTURAL
80-T-34-9032
CONNECTIONS
CONNECTIONS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NO
NO
TBD
NO
YES
NO
YES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
2015-02-02 - Page 19 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Company Name
City
Country
Ref. No. (PS)
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-34-9600
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-35-0014
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-35-0020
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-35-5030
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-35-5130
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-35-5903
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-35-9120
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-35-9124
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-39-0501
PREVENTION OF CORROSION DURING
PRODUCTION
80-T-39-0501
PREVENTION OF CORROSION DURING
PRODUCTION
TBD
134705
AERO FABRICATIONS
WATNALL
United Kingdom
80-T-40-3312
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
NO
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-1065
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-1066
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-1067
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-1068
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-1069
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-1071
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-1072
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-2073
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-2076
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-2078
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-2081
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-2082
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-2336
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-3088
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-3092
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-3096
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-3097
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-4099
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-4102
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-4105
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-4106
AERO FABRICATIONS
WATNALL
United Kingdom
ABP2-4355
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP3-1118
134705
AERO FABRICATIONS
Airbus Qualified Special Process List (External Report)
WATNALL
United Kingdom
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
ALKALINE CLEANING
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLING METALLIC INSERTS (
RIVNUTS )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPROVAL OF WELDING AND
BRAZING OPERATORS
TUNGSTEN INERT GAS ( TIG )
WELDING
MANUAL BRAZING OF STEELS
COPPER AND NICKEL ALLOYS
MANUAL BRAZING OF ALUMINIUM
USING SILICON ROD
ACCEPTANCE STANDARDS FOR
TUNGSTEN INERT GAS ( T.I.G.) &
PLASMA ARC WELDING ( P.A.W.)
PROCESSES
Ref. No. (PI)
80-T-34-9600
80-T-35-0014
80-T-35-0020
80-T-35-5030
80-T-35-5130
80-T-35-5903
80-T-35-9120
80-T-35-9124
ABP2-1065
ABP2-1066
ABP2-1067
ABP2-1068
ABP2-1069
ABP2-1071
ABP2-1072
ABP2-2073
ABP2-2076
ABP2-2078
ABP2-2081
ABP2-2082
ABP2-2336
ABP2-3088
ABP2-3092
ABP2-3096
ABP2-3097
ABP2-4099
ABP2-4102
ABP2-4105
ABP2-4106
ABP2-4355
Title (PI)
Special
Process
ARP-ID
134705
Title (PS)
Couple qualification Status
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
ALKALINE CLEANING
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLING METALLIC INSERTS (
RIVNUTS )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPROVAL OF WELDING AND
BRAZING OPERATORS
TUNGSTEN INERT GAS ( TIG )
WELDING
MANUAL BRAZING OF STEELS
COPPER AND NICKEL ALLOYS
MANUAL BRAZING OF ALUMINIUM
USING SILICON ROD
ACCEPTANCE STANDARDS FOR
TUNGSTEN INERT GAS ( T.I.G.) &
PLASMA ARC WELDING ( P.A.W.)
PROCESSES
HEAT TREATMENT OF RIVETS PRIOR
HEAT TREATMENT OF RIVETS PRIOR
ABP3-1118
TO RIVETING
TO RIVETING
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
NO
NO
TBD
Status
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NONE
NONE
NONE
NONE
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
NONE
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 20 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP3-1120
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP4-1123
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
134705
AERO FABRICATIONS
WATNALL
United Kingdom
Title (PS)
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
Ref. No. (PI)
ABP3-1120
ABP4-1123
Couple qualification Status
Title (PI)
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP4-2128
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP4-2130
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP4-2131
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP4-5142
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP4-5144
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1146
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1147
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1148
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1149
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1152
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1153
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1155
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1158
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP5-1160
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP6-3201
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP6-3202
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP6-3205
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP6-3214
134705
AERO FABRICATIONS
WATNALL
United Kingdom
ABP6-5224
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-01-004
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-003
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-008
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
AIPI01-02-008
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-014
INSTALLATION OF COLD EXPANDED
RETAINERS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2073
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2073 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
AIPI01-02-017
YES
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
PREPARATION OF METALLIC
MATERIALS FOR ADHESIVE BONDING
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
PREPARATION OF PTFE FOR
ADHESIVE BONDING
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING USING SEALANT
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
SWAGING OF TUBES AND CONTROL
CABLES
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
INSTALLATION OF SOLID RIVETS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP4-2130
ABP4-2131
ABP4-5142
ABP4-5144
ABP5-1146
ABP5-1147
ABP5-1148
ABP5-1149
ABP5-1152
ABP5-1153
ABP5-1155
ABP5-1158
ABP5-1160
ABP6-3201
ABP6-3202
ABP6-3205
ABP6-3214
ABP6-5224
AIPI01-01-004
AIPI01-02-003
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
PREPARATION OF METALLIC
MATERIALS FOR ADHESIVE BONDING
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
PREPARATION OF PTFE FOR
ADHESIVE BONDING
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING USING SEALANT
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
SWAGING OF TUBES AND CONTROL
CABLES
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
INSTALLATION OF SOLID RIVETS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 21 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-03-002
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
ABP2-2081
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2081 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-04-017
BRAZING OF METALLIC MATERIALS
ABP2-4106
MANUAL BRAZING OF ALUMINIUM
USING SILICON ROD
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-4106 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-04-017
BRAZING OF METALLIC MATERIALS
ABP2-4105
MANUAL BRAZING OF STEELS
COPPER AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-4105 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-04-017
BRAZING OF METALLIC MATERIALS
ABP2-4099
APPROVAL OF WELDING AND
BRAZING OPERATORS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-4099 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP2-4355
ACCEPTANCE STANDARDS FOR
TUNGSTEN INERT GAS ( T.I.G.) &
PLASMA ARC WELDING ( P.A.W.)
PROCESSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-4355 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS01-04-018
PLASMA ARC WELDING (PAW) OF
METALLIC MATERIALS
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
AIPI02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
NO
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
AIPI03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
YES
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-10-005
AIPI03-10-005
FORMING OF ALUMINIUM ALLOYS
NO
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-10-006
AIPI03-10-006
FORMING OF JOGGLES IN ALUMINIUM
ALLOYS
NO
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-10-011
HARD METAL FORMING - GENERAL
REQUIREMENTS
ABP6-3202
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3202 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
NO
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS03-11-003
NO
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS04-01-001
YES
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
134705
AERO FABRICATIONS
WATNALL
United Kingdom
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-02-003
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-02-003
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-02-009
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-02-009
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-02-009
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-02-011
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-001
Airbus Qualified Special Process List (External Report)
FORMING OF ALUMINIUM ALLOYS GENERAL REQUIREMENTS
FORMING OF JOGGLES IN ALUMINIUM
ALLOYS
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
AIPI03-11-003
AIPI04-01-001
MACHINING METALS BY MECHANICAL
ACTION
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
YES
3 - QUALIFIED
YES
9 - LIMITED SCOPE (AIPS00-00006)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2126
AIPI05-02-009
ABP4-2126
ABP4-2130
AIPI05-02-011
AIPI05-05-001
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
2015-02-02 - Page 22 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-01-007
ABP5-1148
PREPARATION OF PTFE FOR
ADHESIVE BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1148 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-002
AIPI06-02-002
NON STRUCTURAL ADHESIVE
BONDING
YES
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1160
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1160 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1158
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1158 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1155
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1155 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1153
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1153 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1149
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1149 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1147
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1147 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS06-02-007
BONDING METAL / METAL PARTS
STRUCTURAL BONDING PROCESS
ABP5-1146
PREPARATION OF METALLIC
MATERIALS FOR ADHESIVE BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
134705
134705
AERO FABRICATIONS
AERO FABRICATIONS
WATNALL
WATNALL
United Kingdom
United Kingdom
AIPS07-01-006
AIPS08-03-002
YES
NO
3 - QUALIFIED
3 - QUALIFIED
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AIPS09-01-002
ELECTRICAL BONDING
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON AQUEOS
AGENTS
ABP5-1146 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
LIMITED TO CLASS 2 AND 3 PARTS
NONE
NO
3 - QUALIFIED
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AITM6-6006
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
134705
AERO FABRICATIONS
WATNALL
United Kingdom
AITM6-9008
NA
NOT APPLICABLE
YES
3 - QUALIFIED
LIMITED TO METHOD 2
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-30-4010
NO
3 - QUALIFIED
PFA AUG 111A COOLING FLUID
"CIMPERIAL HD812"
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-30-6918
NO
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-30-9910
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-32-2310
NO
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-3000
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-3001
YES
3 - QUALIFIED
NONE
287101
287101
287101
287101
AERO VODOCHODY AS
AERO VODOCHODY AS
AERO VODOCHODY AS
AERO VODOCHODY AS
ODOLENA VODA
ODOLENA VODA
ODOLENA VODA
ODOLENA VODA
Czech Republic
Czech Republic
Czech Republic
Czech Republic
80-T-34-3011
80-T-34-3013
80-T-34-3014
80-T-34-3050
NO
NO
NO
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-3200
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
ETCHING OF FLUOROPOLYMER
ADHEREND PRIOR TO ADHESIVE
BONDING
NON-STRUCTURAL ADHESIVE
BONDING
ELECTRICAL BONDING
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
PRODUCTION OF JOGGLES AT ALSECTIONS
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
WIRE LOCKING
SECURING WITH LOCKWASHERS
SAFETYING WITH SPLIT PINS
TIGHTENING OF SCREWS AND NUTS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
AIPI07-01-006
AIPI08-03-002
AIPI09-01-002
80-T-30-4010
80-T-30-6918
80-T-30-9910
80-T-32-2310
80-T-34-3000
80-T-34-3001
80-T-34-3011
80-T-34-3013
80-T-34-3014
80-T-34-3050
80-T-34-3200
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
PRODUCTION OF JOGGLES AT ALSECTIONS
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
WIRE LOCKING
SECURING WITH LOCKWASHERS
SAFETYING WITH SPLIT PINS
TIGHTENING OF SCREWS AND NUTS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NONE
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
2015-02-02 - Page 23 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
FOR INSTALLATION OF BUSHES BY
COOLING ONLY. TO SIMPLIFY THE
INSTALLATION OF BUSHES, A
WARMING UP OF PART UP TO +60 C IS
ALLOWED. INSTALLATION OF BEARING
ISN'T INCLUDED IN THE SCOPE OF
PAG WORK PACKAGE AND
THEREFORE HASN'T BEEN APPROVED
YET
NONE
PFA AUG 122 "WORKING RANGE OF
ALUMIGOLD B 7,5 - 11 G/LTR" TEN 13
0050 DESCIBES 80-T-35-1101
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-3700
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
80-T-34-3700
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
YES
3 - QUALIFIED
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-5804
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
80-T-34-5804
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
YES
3 - QUALIFIED
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-5814
NO
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-5815
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-5822
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-34-5831
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-0014
NO
3 - QUALIFIED
NONE
287101
287101
287101
AERO VODOCHODY AS
AERO VODOCHODY AS
AERO VODOCHODY AS
ODOLENA VODA
ODOLENA VODA
ODOLENA VODA
Czech Republic
Czech Republic
Czech Republic
80-T-35-0020
80-T-35-0090
80-T-35-0095
NO
TBD
TBD
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
PFA AUG 095 "TURCO 4215NT-LT"
NONE
PFA AUG 123 "WATER QUALITY"
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-0100
NO
3 - QUALIFIED
PFA AUG 034A "TURCO SMUTGO NO.4"
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-0110
NO
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-0114
NO
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-1101
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
YES
3 - QUALIFIED
PFA AUG 122 "WORKING RANGE OF
ALUMIGOLD B 7,5 - 11 G/LTR" TEN 13
0050 DESCRIBES 80-T035-1101
INSTALLATION OF SOLID ALUMINUM
RIVETS
INSTALLATION OF HI-LOKS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
INSTALLATION OF POP BLIND RIVETS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
ALKALINE CLEANING
RINSING
WATER QUALITY
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-2000
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-5000
COATING WITH WASH PRIMER
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-5002
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-5106
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-5218
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-5702
287101
287101
AERO VODOCHODY AS
AERO VODOCHODY AS
ODOLENA VODA
ODOLENA VODA
Czech Republic
Czech Republic
80-T-35-9021
80-T-35-9023
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-9120
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-35-9799
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-36-1010
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-39-0116
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-39-0132
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-39-0141
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-39-0501
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
80-T-40-3312
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0025
Airbus Qualified Special Process List (External Report)
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COAT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
PRESERVATION FOR INTERMEDIATE
STORAGE
PRESERVATION OF CUT EDGES
PRESERVATION OF RIVET ROWS
COATING WITH PAINTS AND
VARNISHES, GENERAL
APPLICATION OF WATER-REPELLENT,
WATER-DISPLACING AND CORROSIONINHIBITING PREVENTIVES
HEAT TREATMENT OF ALUMINIUM
INSTALLATION OF SHIMS IN METALLIC
STRUCTURES
MARKING WITH INDELIBLE INK
APPLICATION AND PROTECTION OF
IDENTIFICATION AND PLATES AND
PLACARDS
PREVENTION OF CORROSION DURING
PRODUCTION
ELECTRICAL BONDING
PROCESS FOR FASTENERS
INSTALLATION ON UNCURED
INTERFAY SEALANT
80-T-34-5814
80-T-34-5815
80-T-34-5822
80-T-34-5831
80-T-35-0014
80-T-35-0020
80-T-35-0090
80-T-35-0095
80-T-35-0100
80-T-35-0110
80-T-35-0114
INSTALLATION OF SOLID ALUMINUM
RIVETS
INSTALLATION OF HI-LOKS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
INSTALLATION OF POP BLIND RIVETS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
ALKALINE CLEANING
RINSING
WATER QUALITY
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
80-T-35-1101
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
80-T-35-2000
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
YES
3 - QUALIFIED
80-T-35-5000
COATING WITH WASH PRIMER
YES
3 - QUALIFIED
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
80-T-35-5002
COATING WITH PUR - BASED TOP
COAT
80-T-35-5106
80-T-35-5218
80-T-35-5702
80-T-35-9021
80-T-35-9023
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
PRESERVATION FOR INTERMEDIATE
STORAGE
PRESERVATION OF CUT EDGES
PRESERVATION OF RIVET ROWS
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-9120
80-T-35-9799
80-T-36-1010
80-T-39-0116
80-T-39-0132
80-T-39-0141
80-T-39-0501
80-T-40-3312
APPLICATION OF WATER-REPELLENT,
WATER-DISPLACING AND CORROSIONINHIBITING PREVENTIVES
HEAT TREATMENT OF ALUMINIUM
INSTALLATION OF SHIMS IN METALLIC
STRUCTURES
MARKING WITH INDELIBLE INK
APPLICATION AND PROTECTION OF
IDENTIFICATION AND PLATES AND
PLACARDS
PREVENTION OF CORROSION DURING
PRODUCTION
ELECTRICAL BONDING
IPDA77-01
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
DEFROSTING - APPLICATION OF
SEALANTS
PFA AUG 096 "DIFFERENT STRIPPING
BATH SOLUTION FOR ANODIZING"
PFA AUG 096A "DIFFERENT SAA
PROCESS PARAMETERS"
NONE
3 - QUALIFIED
TEN 13 0251 DESCRIBES 80-T-9120 +
5002, TEN 13 0252 DESCRIBES 80-T9120 + 5106. NEW PAINT CABINS
2STENG/LAGOS" INTRODUCED AND
ACCEPTED BY PAG 03/2012
YES
3 - QUALIFIED
TEN 13 0251 DESCRIBES 80-T-9120 +
5002, TEN 13 0252 DESCRIBES 80-T9120 + 5106. NEW PAINT CABINS
2STENG/LAGOS" INTRODUCED AND
ACCEPTED BY PAG 03/2012
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
TEN 13 0251 DESCRIBES 80-T-9120 +
5002, TEN 13 0252 DESCRIBES 80-T9120 + 5106. NEW PAINT CABINS
2STENG/LAGOS" INTRODUCED AND
ACCEPTED BY PAG 03/2012
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NO
3 - QUALIFIED
PFA AUG 073A "IMAJE INK 5117 BLUE"
APPLICATION OF CLEAR VARNISH NOT
APPROVED, PERSONNEL NOT
TRAINED YET
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
EXCEPT IN FUEL TANK AREA
YES
2015-02-02 - Page 24 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0029
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0030
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0059
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0061
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
287101
AERO VODOCHODY AS
ODOLENA VODA
287101
AERO VODOCHODY AS
287101
Title (PS)
INSTALLATION OF CYLINDRICAL
SHEAR BOLTS
STRUCTURAL BOLT TIGHTENING
TORQUES
INSPECTION OF PERMANENT AND
REMOVABLE FASTENERS AFTER
INSTALLATION
Ref. No. (PI)
IPDA71-10
IPDA71-03
Couple qualification Status
Title (PI)
INSTALLING HI-LITE FASTENERS IN
METALLIC ASSEMBLIES
APPL COUPLE SERRAGE
BOULONNERIE STRUCTUR
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
IPDA71-10
INSTALLING HI-LITE FASTENERS IN
METALLIC ASSEMBLIES
YES
3 - QUALIFIED
NONE
THERMOFORMING OF
THERMOPLASTICS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TBD)
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 10/04/2015
NONE
ADET0071
PAINTING OF DETAIL METALLIC PARTS
IPDA64-02
PEINTURE MANUELLE DES PIECES
ELEM METALL
YES
3 - QUALIFIED
Czech Republic
ADET0078
STRUCTURAL RIVETING
IPDA71-12
RIVETING OF METAL ASSEMBLIES
YES
3 - QUALIFIED
ODOLENA VODA
Czech Republic
ADET0078
STRUCTURAL RIVETING
NO_AIRBUS_PI
YES
3 - QUALIFIED
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0082
APPLICATION OF SEALANTS
IPDA77-01
YES
3 - QUALIFIED
EXCEPT IN FUEL TANK AREA
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0083
TRIMMING OF FASTENERS
IPDA71-12
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0085
INSTALLATION OF TENSION BOLTS
IPDA71-05
YES
3 - QUALIFIED
EXCLUDING PLI WASHERS
INSTALLATION
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0134
INSTALLATION OF BLIND FASTENERS
IPDA71-14
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QTR INSTALLATION OF TIGHT FIT
BUSHES V2 )
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/04/2015
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0187
WET INSTALLATION OF FASTENERS
IPDA77-01
DEFROSTING - APPLICATION OF
SEALANTS
TBD
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
ADET0191
IPDA75-06
SWAGE BEARINGS & SPHERICAL
BEARINGS
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AIPS02-01-001
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AIPS02-05-001
AIPI02-05-001
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AIPS03-03-001
YES
2 - AUTHORISATION TO
PROCEED UNTIL 28/02/2015
LIMITED TO CLASS 2S & CLASS 3
PARTS
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AIPS04-01-001
YES
3 - QUALIFIED
NONE
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AIPS05-02-011
YES
3 - QUALIFIED
METALLIC PARTS
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AIPS07-01-006
AIPI07-01-006
CHEMICAL CONVERSION COATING
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
ELECTRICAL BONDING
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AITM6-1001
NA
NOT APPLICABLE
YES
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AITM6-4016
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/04/2015
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/04/2015
METHOD M1 AND M2
NA
NOT APPLICABLE
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
THE CODE OF THE PROCESS HAS
CHANGED FROM 340 TO 370
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
YES
3 - QUALIFIED
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AITM6-6004
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
AITM6-9008
287101
AERO VODOCHODY AS
ODOLENA VODA
Czech Republic
EN2004-1
134774
AEROCAPA S L
FUENLABRADA
Spain
AIPS01-02-017
134774
AEROCAPA S L
FUENLABRADA
Spain
AIPS01-02-017
134774
AEROCAPA S L
FUENLABRADA
Spain
AIPS01-02-017
134774
AEROCAPA S L
FUENLABRADA
Spain
134774
AEROCAPA S L
FUENLABRADA
134774
AEROCAPA S L
134774
INSTALLATION OF BALL BEARING,
SPHERICAL BEARING AND BUSHING
BY STAKING
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
CHEMICAL CONVERSION COATING
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
ELECTRICAL BONDING
PENETRANT TESTING
THICKNESS MEASUREMENT OF
METALS BY ULTRASONIC PULSE-ECHO
TECHNIQUE
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
AIPI03-03-001
AIPI04-01-001
AIPI05-02-011
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
Electrical Conductivity
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
I+D-P-231
AIPS03-06-002
LOCKING USING TAB WASHERS
NO_AIRBUS_PI
Spain
AIPS03-06-003
LOCKING USING WIRE
I+D-P-373
FUENLABRADA
Spain
AIPS03-06-004
AEROCAPA S L
FUENLABRADA
Spain
134774
AEROCAPA S L
Airbus Qualified Special Process List (External Report)
FUENLABRADA
Spain
I+D-P-146
I+D-P-062
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TEN-12-0011 & TEN-12-0012)
DEFROSTING - APPLICATION OF
SEALANTS
RIVETING OF METAL ASSEMBLIES
POSE DES BOULONS DE TRACTION ET
DES RONDELLES P.L.I. DANS LES
ASSEMBLAGES METALLIQUES
INSTALLATION OF BLIND FASTENERS
NAS 1919 - 1921
INTEGRAL FUEL TANK SEALING AND
PROTECTION
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
WIRE LOCKING OF PARTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
LOCKING OF PARTS WITH COTTER
AIPS03-06-014
LOCKING BY SPLIT PIN
I+D-P-376
PINS
INTEGRAL FUEL TANK SEALING AND
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-062
PROTECTION
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
LOCKING USING ANAEROBIC
MATERIALS
NO_AIRBUS_PI
YES
2 - AUTHORISATION TO
PROCEED UNTIL 28/02/2015
3 - QUALIFIED
APPLICABLE FOR PAINT COUPLES:
PRIMER P60A - TOP COAT P70A AND
PRIMER S15-90 - TOP COAT C21-100
MANUAL RIVETING ONLY (CE & MULTISTROKE)
AUTOMATIC DEVICE (HOLE
PREPARATION, SEALING AND
RIVETING)
METALLIC PARTS
ALUMINIUM PARTS ONLY
NONE
MIXING AND APPLICATION (TYPE 1A +
B) FUEL TANKS (TYPE 2A)
2015-02-02 - Page 25 of 876
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
134774
AEROCAPA S L
FUENLABRADA
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
134774
AEROCAPA S L
FUENLABRADA
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
I+D-P-146
YES
3 - QUALIFIED
134774
AEROCAPA S L
FUENLABRADA
Spain
AIPS07-01-006
ELECTRICAL BONDING
I+D-P-355
YES
3 - QUALIFIED
ONLY METAL ASSEMBLIES
134774
AEROCAPA S L
FUENLABRADA
Spain
I+D-P-146
APPLICATION OF SEALANTS
I+D-P-146
YES
3 - QUALIFIED
1A+B
293648
AEROFONCTIONS SAS
CAMBES
France
ADET0007
MORTICE AND TENON JOINT OF
COMPOSITE STRUCTURES
NO_AIRBUS_PI
APPLICATION OF SEALANTS
BONDING AND GROUNDING
INSTALLATION
APPLICATION OF SEALANTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IC-DAHE053 - CONTRÔLE BOITIER
751/752VU)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
MIXING AND APPLICATION (TYPE 1A +
B) FUEL TANKS (TYPE 2A)
NONE
YES
3 - QUALIFIED
NONE
293648
AEROFONCTIONS SAS
CAMBES
France
ADET0114
ELECTRICAL BONDING PROCESSES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IGF-003 - MÉTALLISATION)
YES
3 - QUALIFIED
NONE
293648
AEROFONCTIONS SAS
CAMBES
France
ADET0148
OPERATION OF PREPREG WITH
PHENOLIC RESIN BASE REINFORCED
BY LONG FIBRES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IGC-075 - CONTRÔLE ET
AUTOCONTRÔLE DRAPAGE)
TBD
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IGC-044 INSTRUCTION GÉNÉRALE DE
CONTRÔLE)
TBD
3 - QUALIFIED
NONE
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
293648
AEROFONCTIONS SAS
CAMBES
France
ADET0149
PAINTS ON COMPOSITES
MANUFACTURED WITH PHENOLIC
RESIN BASE REINFORCED BY LONG
FIBRES
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0029
INSTALLATION OF CYLINDRICAL
SHEAR BOLTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10E-STQ-07-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0030
STRUCTURAL BOLT TIGHTENING
TORQUES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-03-STQ-07-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0031
FINISHING OF ALUMINIUM ALLOY
PARTS ( DEBURRING, BREAKING OF
SHARP EDGES OR RADIUSING )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STAE-07-IP2-265-A1)
NA
3 - QUALIFIED
VALABLE POUR UTILISATION DE
BROSSE À ROULEAUX UNIQUEMENT
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0033
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF74-01-STQ-03-IP2-265-A0)
TBD
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0078
STRUCTURAL RIVETING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-07-IP2-265-A1)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0079
CHROMATING TREATMENT FOR
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-03-IP-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-08-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0134
INSTALLATION OF BLIND FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-14-STQ-07-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-03-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STQ-03-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0187
WET INSTALLATION OF FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10A-STQ-07-IP2-265-A0)
TBD
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
ADET0191
INSTALLATION OF BALL BEARING,
SPHERICAL BEARING AND BUSHING
BY STAKING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-06-STQ-03-IP2-265-A0)
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10E-STQ-07-IP2-265-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0029 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-006
INSTALLATION OF LOCKBOLTS PULL
AND STUMP TYPES
NO_AIRBUS_PI
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0029 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
AIPI01-02-013
YES
3 - QUALIFIED
NONE
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
NO_AIRBUS_PI
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0134 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-015
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0134 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AEROLEAN A NOVAE GROUP
296707
COMPANY
Airbus Qualified Special Process List (External Report)
PRUNAY
France
YES
3 - QUALIFIED
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10E-STQ-07-IP2-265-A0)
INSTALLATION OF BLIND BOLTS PULLTYPE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-14-STQ-07-IP2-265-A0)
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-14-STQ-07-IP2-265-A0)
INSTALLATION OF BUSHES, SHRINK
INSTALLATION OF BUSHES SHRINK
AIPS01-02-019
AIPI01-02-019
AND PRESS FIT
AND PRESS FIT
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
INSTALLATION OF BLIND BOLTS
THREADED TYPE
NO_AIRBUS_PI
NONE
2015-02-02 - Page 26 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0173 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0029 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 02/04/2015
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-265-A0)
YES
3 - QUALIFIED
NONE
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
ONLY WITHOUT POST-TREATMENT
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 02/04/2015
LIMITED TO IMMERSION PROCESS
AIPS02-05-001
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-03-IP-265-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0079 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
NO_AIRBUS_PI
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-022
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
NO_AIRBUS_PI
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NA
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS02-01-003
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
Title (PI)
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-03-IP2-265-A0)
INSTALLING THREADED CYLINDRICAL
FASTENERS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10E-STQ-07-IP2-265-A0)
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STAE-07-IP2-265-A1)
NO
9 - LIMITED SCOPE (AIPS00-00006)
VALABLE POUR UTILISATION DE
BROSSE À ROULEAUX
UNIQUEMENTADET0031 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-265-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0071 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-08-IP2-265-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-08-IP2-265-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-08-IP2-265-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296707
AEROLEAN A NOVAE GROUP
COMPANY
PRUNAY
France
AIPS07-01-006
ELECTRICAL BONDING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF83-11-STQ-07-IP2-265-A0)
YES
3 - QUALIFIED
TYPES 1-2-3 ET UN AUDIT DE
SURVEILLANCE EST À PRÉVOIR EN
2008
PRUNAY
France
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 06/07/2015
ONLY ALUMINIUM ALLOYS
PRUNAY
France
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
PRUNAY
France
IGC04-25-105
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
PRUNAY
France
IGC04-63-100
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
PRUNAY
France
IGC04-63-110
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
PRUNAY
France
IGC04-63-111
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
WORCESTER
SITTINGBOURNE
ROCHESTER
United Kingdom
United Kingdom
United Kingdom
ABP0-2018
ABP0-2018
ABP0-2018
ABP0-2018
ABP0-2018
ABP0-2018
TBD
TBD
TBD
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
ROCHESTER
United Kingdom
ABP1-4327
TBD
3 - QUALIFIED
NONE
ROCHESTER
United Kingdom
ABP2-1065
YES
3 - QUALIFIED
NONE
ROCHESTER
United Kingdom
ABP2-1067
YES
3 - QUALIFIED
NONE
ROCHESTER
United Kingdom
ABP2-1068
SUPPLY OF CASTINGS
SUPPLY OF CASTINGS
SUPPLY OF CASTINGS
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
296707
296707
296707
296707
296707
296707
134834
134835
240859
240859
240859
240859
240859
AEROLEAN A NOVAE GROUP
COMPANY
AEROLEAN A NOVAE GROUP
COMPANY
AEROLEAN A NOVAE GROUP
COMPANY
AEROLEAN A NOVAE GROUP
COMPANY
AEROLEAN A NOVAE GROUP
COMPANY
AEROLEAN A NOVAE GROUP
COMPANY
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
ABP2-2087
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
ABP2-2336
ROCHESTER
United Kingdom
ABP2-3097
AEROMET INTERNATIONAL
PLC
Airbus Qualified Special Process List (External Report)
240859
METALLIC ELEMENTS - MAGNETIC
PARTICLE INSPECTION
QUALIFICATION OF HEAT TREATMENT
AND CURING INSTALLATIONS
HEAT TREATEMENT FOR STEELS INSPECTION OF OPERATIONS AND OF
PARTS
HEAT TREATEMENT OF ALUMINIUM
ALLOYS - INSPECTION OF
OPERATIONS AND OF PARTS
SUPPLY OF CASTINGS
SUPPLY OF CASTINGS
SUPPLY OF CASTINGS
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
ABP1-4327
ABP2-1065
ABP2-1067
ABP2-1068
ABP2-2087
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
PREPARATION OF COUNTERSUNK
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
ABP2-3097
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
FASTENING AND RIVETING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 27 of 876
External Shop
ARP-ID
240859
240859
240859
240859
240859
Company Name
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
AEROMET INTERNATIONAL
PLC
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
ROCHESTER
United Kingdom
ABP4-5141
ROCHESTER
United Kingdom
ABP4-5142
ROCHESTER
United Kingdom
ABP4-5144
ROCHESTER
United Kingdom
ABP6-3205
ROCHESTER
United Kingdom
ABP6-5230
Title (PS)
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
TESTING BY PENETRANT FLAW
DETECTION
Ref. No. (PI)
ABP4-5141
ABP4-5142
ABP4-5144
ABP6-3205
Couple qualification Status
Title (PI)
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240859
AEROMET INTERNATIONAL
PLC
ROCHESTER
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
256270
AEROPROTEC
PAU
France
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-ST02-STQ-05-IP2-284-A0)
YES
3 - QUALIFIED
MEO TYPES 1 ET 2
ACIER R < 1450 MPA
256270
AEROPROTEC
PAU
France
ADET0072
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-05-IP2-284-A0)
TBD
3 - QUALIFIED
NONE
256270
AEROPROTEC
PAU
France
ADET0079
CHROMATING TREATMENT FOR
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-05-IP2-284-A0)
YES
3 - QUALIFIED
NONE
256270
AEROPROTEC
PAU
France
ADET0084
SULFURIC - ACID ANODIZING OF
TITANIUM AND TITANIUM ALLOYS (
EXCEPT FASTENERS )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-ST03-STQ-05-IP2-284-A0)
YES
3 - QUALIFIED
NONE
256270
AEROPROTEC
PAU
France
ADET0163
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IQ5-0-15F)
TBD
3 - QUALIFIED
NONE
256270
AEROPROTEC
PAU
France
AIPS02-01-001
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 04/03/2015
NONE
256270
AEROPROTEC
PAU
France
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IQ5-014H)
YES
3 - QUALIFIED
MEO TYPES 1 ET 2
ACIER R < 1450 MPA
256270
AEROPROTEC
PAU
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 04/03/2015
NONE
256270
AEROPROTEC
PAU
France
AIPS02-05-005
YES
3 - QUALIFIED
NONE
256270
AEROPROTEC
PAU
France
YES
3 - QUALIFIED
NONE
256270
256270
256270
AEROPROTEC
AEROPROTEC
AEROPROTEC
PAU
PAU
PAU
France
France
France
YES
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
256270
AEROPROTEC
PAU
France
NO
3 - QUALIFIED
NONE
256270
AEROPROTEC
Airbus Qualified Special Process List (External Report)
PAU
France
NO
3 - QUALIFIED
NONE
2015-02-02 - Page 28 of 876
ELECTROLYTIC SILVER PLATING OF
STAINLESS STEELS AND COPPER
ALLOYS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
PASSIVATION OF CORROSION
PASSIVATION OF CORROSION
AIPI02-05-005
RESISTANT STEEL
RESISTANT STEEL
APPLICATION OF DECORATIVE
APPLICATION OF DECORATIVE
AIPS05-02-006
AIPI05-02-006
INTERIOR PAINT
INTERIOR PAINT
APPLICATION OF STRUCTURAL
APPLICATION OF STRUCTURAL
AIPS05-02-009
AIPI05-02-009
PAINTS
PAINTS
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
AITM6-2001
MAGNETIC PARTICLE INSPECTION
NA
NOT APPLICABLE
METALLIC ELEMENTS LIQUID
IGC04-25-100
NA
NOT APPLICABLE
PENETRANT INSPECTION
FLUORESCENT DYE PENETRANT
IGC04-25-101
NA
NOT APPLICABLE
INSPECTION ALLOWED MATERIALS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
Title (PI)
Special
Process
Status
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP1-2035
COLD WORKING OF HOLES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
NONE
AIPI01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
YES
3 - QUALIFIED
NONE
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Company Name
City
Country
Ref. No. (PS)
256270
AEROPROTEC
PAU
France
IGC04-25-102
256270
AEROPROTEC
PAU
France
IGC04-25-105
VALENCIA
USA
ABP1-2035
VALENCIA
USA
ABP2-1065
VALENCIA
USA
ABP2-1072
VALENCIA
USA
ABP2-2075
VALENCIA
USA
ABP2-2336
VALENCIA
USA
ABP4-5141
VALENCIA
USA
ABP4-5142
VALENCIA
USA
ABP6-3205
VALENCIA
USA
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
VALENCIA
USA
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
VALENCIA
USA
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
VALENCIA
USA
AIPS01-02-008
VALENCIA
USA
AIPS01-02-016
VALENCIA
USA
AIPS01-02-017
134963
134963
134963
134963
134963
134963
134963
134963
134963
134963
134963
134963
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
VISUAL INSPECTIONS UNDER
ULTAVIOLET RADIATION
METALLIC ELEMENTS - MAGNETIC
PARTICLE INSPECTION
COLD WORKING OF HOLES
RIVETING WITH BLIND NUT PLATE
RIVETS
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF RIVETLESS
NUTPLATES
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
ARP-ID
134963
Title (PS)
Couple qualification Status
ABP2-1065
ABP2-1072
ABP2-2075
ABP2-2336
ABP4-5141
ABP4-5142
ABP6-3205
AIPI01-02-008
AIPI01-02-016
AIPI01-02-017
RIVETING WITH BLIND NUT PLATE
RIVETS
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF RIVETLESS NUT
PLATES
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
AIPI01-02-019
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2075
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2075 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS01-03-004
INSTALLATION OF HELICOIL
THREADED INSERTS
AIPI01-03-004
INSTALLATION OF HELICAL THREADED
INSERTS
YES
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS02-02-005
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
ABP1-2035
COLD WORKING OF HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2035 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
AIPI02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
YES
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS02-04-001
NO
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS03-01-012
YES
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS03-03-012
YES
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS03-06-004
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS03-06-007
EXTERNAL SWAGED TUBE FITTINGS
AIPI03-06-007
EXTERNAL SWAGED TUBE FITTINGS
YES
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS03-06-014
LOCKING BY SPLIT PIN
AIPI03-06-014
LOCKING BY SPLIT PIN
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS03-06-015
TORQUE TIGHTENING OF A380 AND
A350 HYDRAULIC CONNECTIONS
AIPI03-06-015
YES
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS03-11-002
PRECISION GRINDING
AIPI03-11-002
PRECISION GRINDING
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
AIPI03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO
3 - QUALIFIED
NONE
134963
134963
134963
134963
134963
134963
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
Airbus Qualified Special Process List (External Report)
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
EXTERNAL SWAGING OF FITTINGS ON
5 080 PSI TITANIUM TUBES
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
LOCKING USING ANAEROBIC
MATERIALS
AIPI02-04-001
AIPI03-01-012
AIPI03-03-012
AIPI03-06-004
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
EXTERNAL SWAGING OF FITTINGS ON
5080 PSI TITANIUM TUBES
INSTALLATION OF BEARINGS,
SPHERICAL BEARINGS AND BUSHES
BY SWAGING
LOCKING USING ANAEROBIC
MATERIALS
TORQUE TIGHTENING OF A380 AND
A350 HYDRAULIC CONNECTIONS
MACHINING METALS BY MECHANICAL
ACTION
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 29 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
AIPI05-05-008
APPLICATION OF LOW ADHESION
SEALANT
YES
3 - QUALIFIED
NONE
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
134963
AEROSPACE DYNAMICS
INTERNATIONAL INC
VALENCIA
USA
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
VALENCIA
USA
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS08-02-003
IDENTIFICATION BY BAG AND TAG
AIPI08-02-003
IDENTIFICATION BY BAG AND TAG
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS08-03-001
ELECTROCHEMICAL MARKING
AIPI08-03-001
ELECTROCHEMICAL MARKING
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS08-03-002
PERMANENT MARKING WITH INK
AIPI08-03-002
PERMANENT MARKING WITH INK
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS08-03-002
AIPI08-02-003
IDENTIFICATION BY BAG AND TAG
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS09-01-002
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AIPS09-01-014
NO
3 - QUALIFIED
NONE
VALENCIA
USA
AITM6-9008
YES
3 - QUALIFIED
NONE
ARLINGTON
USA
AIPS01-02-008
YES
3 - QUALIFIED
NONE
ARLINGTON
USA
AIPS01-02-017
YES
3 - QUALIFIED
NONE
ARLINGTON
USA
AIPS01-02-022
YES
3 - QUALIFIED
NONE
ARLINGTON
USA
AIPS03-10-003
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
FINAL CLEANING OF HYDRAULIC
PIPES
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
RECTIFICATION OF METALLIC
MATERIALS BY 3 POINT BENDING
Yes
3 - QUALIFIED
NONE
ARLINGTON
USA
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
NONE
ARLINGTON
USA
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
134963
134963
134963
134963
134963
134963
134963
134963
296799
296799
296799
296799
296799
296799
296799
292929
292929
292929
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE DYNAMICS
INTERNATIONAL INC
AEROSPACE MANUFACTURING
TECHNOLOGIE
AEROSPACE MANUFACTURING
TECHNOLOGIE
AEROSPACE MANUFACTURING
TECHNOLOGIE
AEROSPACE MANUFACTURING
TECHNOLOGIE
AEROSPACE MANUFACTURING
TECHNOLOGIE
AEROSPACE MANUFACTURING
TECHNOLOGIE
AEROSPACE MANUFACTURING
TECHNOLOGIE
AEROSPACE METAL
FINISHERS LTD
AEROSPACE METAL
FINISHERS LTD
ARLINGTON
USA
AIPS05-05-004
BALLYMENA
United Kingdom
ABP1-1023
BALLYMENA
United Kingdom
ABP1-5057
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
ABP4-1123
BALLYMENA
United Kingdom
ABP4-2130
BALLYMENA
United Kingdom
ABP6-5230
BALLYMENA
United Kingdom
ABP8-1290
BALLYMENA
United Kingdom
ABP8-1296
BALLYMENA
United Kingdom
ABP9-2318
AEROSPACE METAL
FINISHERS LTD
AEROSPACE METAL
292929
FINISHERS LTD
AEROSPACE METAL
292929
FINISHERS LTD
AEROSPACE METAL
292929
FINISHERS LTD
AEROSPACE METAL
292929
FINISHERS LTD
Airbus Qualified Special Process List (External Report)
292929
CHROMIC ACID ANODISING OF
ALUMINIUM
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
TESTING BY PENETRANT FLAW
DETECTION
CLEANING AND DEGREASING OF
METALLIC MATERIALS (ALKALINE)
DEOXIDATION OF ALUMINIUM ALLOYS
AIPI09-01-002
AIPI09-01-014
CLEANING WITH LIQUID NON AQUEOS
AGENTS
FINAL CLEANING OF HYDRAULIC
PIPES
NA
AIPI01-02-008
AIPI01-02-017
AIPI01-02-022
AIPI03-10-003
ABP1-1023
ABP1-5057
ABP4-1123
ABP4-2130
NOT APPLICABLE
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLING THREADED CYLINDRICAL
FASTENERS
RECITIFICATION OF METALLIC
MATERIALS BY 3 POINT BENDING
CHROMIC ACID ANODISING OF
ALUMINIUM
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP8-1290
CLEANING AND DEGREASING OF
METALLIC MATERIALS (ALKALINE)
NO
3 - QUALIFIED
NONE
ABP8-1296
DEOXIDATION OF ALUMINIUM ALLOYS
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
2015-02-02 - Page 30 of 876
MARKING BY BAG AND LABELS
ABP9-2318
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
MARKING BY BAG AND LABELS
External Shop
ARP-ID
292929
292929
Company Name
AEROSPACE METAL
FINISHERS LTD
AEROSPACE METAL
FINISHERS LTD
Process Specification(PS) / Process Instruction (PI)
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
BALLYMENA
United Kingdom
ABP9-3323
INK MARKING GENERAL
ABP9-3323
INK MARKING GENERAL
NO
3 - QUALIFIED
NONE
BALLYMENA
United Kingdom
ABP9-4324
CONTROL OF MARKING
SPECIFICATIONS
ABP9-4324
CONTROL OF MARKING
SPECIFICATIONS
TBD
3 - QUALIFIED
NONE
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
292929
BALLYMENA
United Kingdom
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
292929
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
BALLYMENA
United Kingdom
AIPS05-02-003
BALLYMENA
United Kingdom
AIPS05-02-009
292929
AEROSPACE METAL
FINISHERS LTD
AEROSPACE METAL
FINISHERS LTD
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
AEROSPACE METAL
FINISHERS LTD
292929
Couple qualification Status
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-003
AIPI05-02-009
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
292929
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
292929
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
292929
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
AIPS08-03-002
PERMANENT MARKING WITH INK
AIPI08-03-002
PERMANENT MARKING WITH INK
NO
3 - QUALIFIED
NONE
292929
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
AIPS08-03-002
PERMANENT MARKING WITH INK
ABP9-3323
INK MARKING GENERAL
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP9-3323 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
292929
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
ABP8-1290
CLEANING AND DEGREASING OF
METALLIC MATERIALS (ALKALINE)
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP8-1290 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
292929
AEROSPACE METAL
FINISHERS LTD
BALLYMENA
United Kingdom
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
292929
AEROSPACE METAL
FINISHERS LTD
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
TBD
3 - QUALIFIED
BRUSH APPLICATION ONLY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
YES
3 - QUALIFIED
NONE
291650
291650
291650
291650
291650
291650
291650
291650
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
BALLYMENA
United Kingdom
AITM6-6004
BELGAUM
India
80-T-35-0014
BELGAUM
India
80-T-35-5030
BELGAUM
India
80-T-35-5130
BELGAUM
India
80-T-35-5702
BELGAUM
India
80-T-35-9120
BELGAUM
India
80-T-35-9124
BELGAUM
India
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
MARKING WITH PENS
BELGAUM
India
80-T-39-0501
PREVENTION OF CORROSION DURING
PRODUCTION
80-T-39-0501
PREVENTION OF CORROSION DURING
PRODUCTION
TBD
3 - QUALIFIED
BRUSH APPLICATION ONLY
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
NO
3 - QUALIFIED
SURFACE PREPARATION ONLY
(UNMASKING + CLEANING +
PROTECTION WITH OIL)
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
2015-02-02 - Page 31 of 876
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
80-T-40-3312
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
ABP1-1023
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
ABP1-2028
BELGAUM
India
ABP1-2029
BELGAUM
India
ABP1-2344
BELGAUM
India
ABP1-5057
BELGAUM
India
ABP4-1123
BELGAUM
India
ABP4-2130
BELGAUM
India
ABP5-1351
BELGAUM
India
ABP6-5224
291650
291650
291650
291650
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
291650
INDIA PVT LTD
AEROSPACE PROCESSING
291650
INDIA PVT LTD
Airbus Qualified Special Process List (External Report)
291650
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
PRESERVATION FOR INTERMEDIATE
STORAGE
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-0014
80-T-35-5030
80-T-35-5130
80-T-35-5702
80-T-35-9120
80-T-35-9124
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
PRESERVATION FOR INTERMEDIATE
STORAGE
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
CHROMIC ACID ANODISING OF
CHROMIC ACID ANODISING OF
ABP1-1023
ALUMINIUM
ALUMINIUM
SHOT PEENING FOR IMPROVED
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
ABP1-2028
FATIGUE AND STRESS CORROSION
RESISTANCE
RESISTANCE
SURFACE IMPROVEMENT USING
SURFACE IMPROVEMENT USING
ABP1-2029
GLASS BEADS
GLASS BEADS
CLEANING AND SURFACE
CLEANING AND SURFACE
ABP1-2344
IMPROVEMENT BY BLASTING
IMPROVEMENT BY BLASTING
CONVERSION COATING OF
CONVERSION COATING OF
ABP1-5057
ALUMINIUM
ALUMINIUM
APPLICATION OF CORROSION
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
ABP4-1123
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
APPLICATION OF FLEXIBLE FINISH
ABP4-2130
PAINT TO AN INTERNAL SURFACE
PAINT TO AN INTERNAL SURFACE
SURFACE PREPARATION PRIOR TO
SURFACE PREPARATION PRIOR TO
ABP5-1351
APPLICATION OF PAINTS
APPLICATION OF PAINTS
TESTING OF ALUMINIUM ALLOYS BY
NA
NOT APPLICABLE
ELECTRICAL CONDUCTIVITY
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
ARP-ID
291650
291650
291650
291650
291650
Company Name
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
BELGAUM
India
ABP6-5226
BELGAUM
India
ABP6-5229
BELGAUM
India
ABP6-5230
BELGAUM
India
ABP8-2297
BELGAUM
India
ABP8-2299
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP8-2297
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
NO
3 - QUALIFIED
NONE
PICKLING OF TITANIUM ALLOYS
ABP8-2299
PICKLING OF TITANIUM ALLOYS
YES
3 - QUALIFIED
NONE
Title (PS)
HARDNESS TESTING OF METALLIC
MATERIALS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
FOR PAINTED PARTS ONLY
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
ABP1-2028
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2028 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AIPS02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
AIPI02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
YES
3 - QUALIFIED
ONLY AUSTENITIC STEELS /
QUALIFICATION TEST REPORT :
TO50901-1/2/3
BELGAUM
India
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-009
APPLICATION OF STRUCTURAL
PAINTS
YES
3 - QUALIFIED
RESTRICTED TO METALLIC PARTS
BELGAUM
India
AIPS08-03-002
PERMANENT MARKING WITH INK
AIPI08-03-002
PERMANENT MARKING WITH INK
NO
3 - QUALIFIED
NONE
291650
291650
AEROSPACE PROCESSING
INDIA PVT LTD
AEROSPACE PROCESSING
INDIA PVT LTD
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
ABP8-2299
PICKLING OF TITANIUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP8-2299 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
291650
AEROSPACE PROCESSING
INDIA PVT LTD
BELGAUM
India
AITM6-6006
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-1023
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-1024
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-2344
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-3038
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-3039
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-4041
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-5056
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-5057
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-5058
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP1-5062
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP3-1115
YES
3 - QUALIFIED
NONE
CHELMSFORD
United Kingdom
ABP4-1121
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
ABP4-1123
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
ABP4-1352
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
ABP4-2124
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
ABP4-2125
CHELMSFORD
United Kingdom
ABP4-2126
AEROSPACE SURFACE
TREATMENTS LTD
Airbus Qualified Special Process List (External Report)
135004
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
CHROMIC ACID ANODISING OF
ALUMINIUM
SULPHURIC ACID ANODISING OF
ALUMINIUM
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
DEPOSITION OF ZINC BY SPRAYING
DEPOSITION OF ALUMINIUM
SPRAYING
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
PHOSPHATING OF STEELS
CONVERSION COATING OF
ALUMINIUM
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
PASSIVATION OF STEELS AND NICKEL
ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
ABP1-1023
ABP1-1024
ABP1-2344
ABP1-3038
ABP1-3039
ABP1-4041
ABP1-5056
ABP1-5057
ABP1-5058
ABP1-5062
ABP3-1115
ABP4-1121
ABP4-1123
ABP4-1352
ABP4-2124
ABP4-2125
CHROMIC ACID ANODISING OF
ALUMINIUM
SULPHURIC ACID ANODISING OF
ALUMINIUM
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
DEPOSITION OF ZINC BY SPRAYING
DEPOSITION OF ALUMINIUM
SPRAYING
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
PHOSPHATING OF STEELS
CONVERSION COATING OF
ALUMINIUM
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
PASSIVATION OF STEELS AND NICKEL
ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
APPLICATION OF POLYURETHANE
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
ABP4-2126
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
EXTERNAL SURFACE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 32 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
135004
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
ABP4-2128
CHELMSFORD
United Kingdom
ABP4-2130
CHELMSFORD
United Kingdom
ABP4-2131
CHELMSFORD
United Kingdom
ABP4-2133
CHELMSFORD
United Kingdom
ABP4-2361
CHELMSFORD
United Kingdom
ABP4-2364
CHELMSFORD
United Kingdom
ABP4-3135
CHELMSFORD
United Kingdom
ABP4-3138
CHELMSFORD
United Kingdom
ABP4-3329
CHELMSFORD
United Kingdom
ABP4-3350
CHELMSFORD
United Kingdom
ABP4-4139
CHELMSFORD
United Kingdom
ABP4-4140
CHELMSFORD
United Kingdom
ABP6-5224
CHELMSFORD
United Kingdom
ABP6-5225
CHELMSFORD
United Kingdom
ABP6-5226
CHELMSFORD
United Kingdom
ABP6-5229
CHELMSFORD
United Kingdom
ABP6-5230
CHELMSFORD
United Kingdom
ABP8-2299
CHELMSFORD
United Kingdom
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
APPLICATION OF PINHOLE FILLER
STRIPPING OF PAINTS BY BLASTING (
PAINTBLAST )
STRIPPING OF PAINTS BY CHEMICAL
METHODS
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
ABP4-2130
ABP4-2131
ABP4-2133
ABP4-2361
ABP4-2364
ABP4-3135
ABP4-3138
ABP4-3329
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
3 - QUALIFIED
NONE
ABP4-4139
STRIPPING OF PAINTS BY BLASTING (
PAINTBLAST )
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
None
TBD
3 - QUALIFIED
NONE
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
ABP6-5225
ABP6-5226
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
PICKLING OF TITANIUM ALLOYS
ABP8-2299
PICKLING OF TITANIUM ALLOYS
YES
3 - QUALIFIED
NONE
ABP8-2300
PICKLING OF COPPER ALLOYS
ABP8-2300
PICKLING OF COPPER ALLOYS
TBD
3 - QUALIFIED
NONE
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
ABP1-1024
SULPHURIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1024 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-03-004
DEPOSITION OF ALUMINIUM BY THE
THERMAL SPRAY PROCESS
ABP1-3039
DEPOSITION OF ALUMINIUM
SPRAYING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-3039 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
ABP1-5058
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5058 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
ABP1-4041
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-4041 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-05-003
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
ABP1-5062
PASSIVATION OF STEELS AND NICKEL
ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5062 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS02-05-004
PHOSPHATING OF STEEL
ABP1-5056
PHOSPHATING OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5056 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 33 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
ABP4-2125
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
135004
AEROSPACE SURFACE
TREATMENTS LTD
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
CHELMSFORD
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
CHELMSFORD
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-009
APPLICATION OF STRUCTURAL
PAINTS
YES
3 - QUALIFIED
NONE
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3135
APPLICATION OF FILLER TO SMALL
HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3135 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-009
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3350 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-011
YES
3 - QUALIFIED
NONE
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-02-017
APPLICATION OF CORROSION
INHIBITING COATING ON EXTERNAL
UNPAINTED EROSION PRONE
ALUMINIUM SURFACES
AIPI05-02-017
APPLICATION OF CORROSION
INHIBITING COATING ON EXTERNAL
EROSION PRONE (UNPAINTED)
ALUMINIUM SURFACES
YES
3 - QUALIFIED
NONE
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-3329
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3329 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CHELMSFORD
United Kingdom
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
AIPI05-02-011
ABP4-2133
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
APPLICATION OF EROSION RESISTANT
PAINT
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
ABP8-2299
PICKLING OF TITANIUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP8-2299 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135004
AEROSPACE SURFACE
TREATMENTS LTD
CHELMSFORD
United Kingdom
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
284644
AEROSPHERE INC
POINT CLAIRE
Canada
ABP1-2028
284644
AEROSPHERE INC
POINT CLAIRE
Canada
ABP1-2030
284644
AEROSPHERE INC
POINT CLAIRE
Canada
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
ABP1-2028
272298
AEROSTAR SA
BACAU
Romania
80-T-30-0032
MACHINING OF FRP COMPONENTS
80-T-30-0032
Airbus Qualified Special Process List (External Report)
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
SURFACE IMPROVEMENT USING
ROTARY FLAP PEENING
ABP1-2028
ABP1-2030
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
SURFACE IMPROVEMENT USING
ROTARY FLAP PEENING
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2028 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
MACHINING OF FRP COMPONENTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 34 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
272298
AEROSTAR SA
BACAU
Romania
80-T-30-4010
MACHINING OF METALLIC
COMPONENTS
80-T-30-4010
MACHINING OF METALLIC
COMPONENTS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY
272298
272298
AEROSTAR SA
AEROSTAR SA
BACAU
BACAU
Romania
Romania
80-T-30-6912
GRINDING OF STEEL
80-T-30-6913
PRECISION GRINDING OF HARD
CHROMIUM LAYERS ON STEEL
272298
AEROSTAR SA
BACAU
Romania
80-T-30-6918
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
272298
AEROSTAR SA
BACAU
Romania
80-T-30-6919
VIBRATORY GRINDING
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
272298
AEROSTAR SA
BACAU
Romania
80-T-30-6912
GRINDING OF STEEL
NO
80-T-30-6913
PRECISION GRINDING OF HARD
CHROMIUM LAYERS ON STEEL
80-T-30-6918
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
80-T-30-6919
VIBRATORY GRINDING
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
NO
YES
272298
AEROSTAR SA
BACAU
Romania
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM (PRESS BREAK FORMING,
MANUAL FORMING ONLY)
272298
AEROSTAR SA
BACAU
Romania
80-T-33-3010
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
80-T-33-3010
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
272298
AEROSTAR SA
BACAU
Romania
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
272298
AEROSTAR SA
BACAU
Romania
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-34-5822
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
80-T-34-5822
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-34-9032
BONDING OF NON-STRUCTURAL
CONNECTIONS
80-T-34-9032
BONDING OF NON-STRUCTURAL
CONNECTIONS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
272298
AEROSTAR SA
BACAU
Romania
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
272298
AEROSTAR SA
BACAU
Romania
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-35-0130
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
80-T-35-0130
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY
272298
AEROSTAR SA
Airbus Qualified Special Process List (External Report)
BACAU
Romania
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
80-T-35-0200
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
ABRASIVE BLASTING - CLEANING -
YES
2015-02-02 - Page 35 of 876
External Shop
ARP-ID
272298
Company Name
AEROSTAR SA
Process Specification(PS) / Process Instruction (PI)
City
BACAU
Country
Romania
Ref. No. (PS)
Title (PS)
80-T-35-0205
SHOT PEENING
Ref. No. (PI)
Couple qualification Status
Title (PI)
80-T-35-0205
SHOT PEENING
80-T-35-1200
PASSIVATION OF CORROSION RESISTANT AUSTENITIC STEEL
Special
Process
Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY; FOR ALLOY STEEL
INTERMEDIATE CORROSION
PROTECTION IS NECESSARY IF
FURTHER PROCESSING IS LATER
THAN 4HOURS IN ACCORDANCE WITH
80-T-35-5702
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY
YES
272298
AEROSTAR SA
BACAU
Romania
80-T-35-1200
PASSIVATION OF CORROSION RESISTANT AUSTENITIC STEEL
272298
AEROSTAR SA
BACAU
Romania
80-T-35-1201
PASSIVATION OF MARTENSITIC
FERRITIC CORROSION - RESISTANT
STEEL
80-T-35-1201
PASSIVATION OF MARTENSITIC
FERRITIC CORROSION - RESISTANT
STEEL
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-35-2100
CHROMIC ACID ANODIZING
80-T-35-2100
CHROMIC ACID ANODIZING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
272298
AEROSTAR SA
BACAU
Romania
80-T-35-3200
HARD CHROMIUM PLATING
80-T-35-3200
HARD CHROMIUM PLATING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY
272298
AEROSTAR SA
BACAU
Romania
80-T-35-5002
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
80-T-35-5002
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-35-5106
COATING WITH PUR - BASED TOP
COAT
80-T-35-5106
COATING WITH PUR - BASED TOP
COAT
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
80-T-35-5401
ELECTROSTATIC POWDER COATING
OF ALUMINIUM COMPONENTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) A330/A340 RACEWAYS
ONLY
272298
AEROSTAR SA
BACAU
Romania
80-T-35-5401
ELECTROSTATIC POWDER COATING
OF ALUMINIUM COMPONENTS
272298
AEROSTAR SA
BACAU
Romania
80-T-35-9023
PRESERVATION OF RIVET ROWS
80-T-35-9023
PRESERVATION OF RIVET ROWS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM (SOLUTION TREATMENT
ONLY)
272298
AEROSTAR SA
BACAU
Romania
80-T-36-3300
DEHYDROGENATION OF STEELS
80-T-36-3300
DEHYDROGENATION OF STEELS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY
272298
AEROSTAR SA
BACAU
Romania
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
80-T-40-3312
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
ABP1-1023
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP1-2344
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP1-3038
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP1-4041
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP1-5057
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP1-5058
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP2-1065
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP2-1067
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
BACAU
Romania
ABP2-1068
YES
3 - QUALIFIED
NONE
272298
AEROSTAR SA
Airbus Qualified Special Process List (External Report)
BACAU
Romania
ABP2-1069
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 36 of 876
CHROMIC ACID ANODISING OF
CHROMIC ACID ANODISING OF
ABP1-1023
ALUMINIUM
ALUMINIUM
CLEANING AND SURFACE
CLEANING AND SURFACE
ABP1-2344
IMPROVEMENT BY BLASTING
IMPROVEMENT BY BLASTING
DEPOSITION OF ZINC BY SPRAYING
ABP1-3038
DEPOSITION OF ZINC BY SPRAYING
CADMIUM PLATING OF STEELS
CADMIUM PLATING OF STEELS
ABP1-4041
NICKEL ALLOYS & COPPER ALLOYS
NICKEL ALLOYS & COPPER ALLOYS
CONVERSION COATING OF
CONVERSION COATING OF
ABP1-5057
ALUMINIUM
ALUMINIUM
CHROMATE PASSIVATION OF
CHROMATE PASSIVATION OF
ABP1-5058
CADMIUM AND ZINC
CADMIUM AND ZINC
RIVETING WITH BLIND NUT PLATE
RIVETING WITH BLIND NUT PLATE
ABP2-1065
RIVETS
RIVETS
RIVETING WITH BLIND RIVETS
ABP2-1067
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
RIVETING WITH BLIND RIVETS (
ABP2-1068
CHOBERT )
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETING WITH BLIND FLUSH BREAK
ABP2-1069
RIVETS ( AVDEL MBC )
RIVETS ( AVDEL MBC )
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
272298
AEROSTAR SA
BACAU
Romania
ABP2-1071
272298
AEROSTAR SA
BACAU
Romania
ABP2-1072
272298
AEROSTAR SA
BACAU
Romania
ABP2-2073
272298
AEROSTAR SA
BACAU
Romania
ABP2-2075
272298
AEROSTAR SA
BACAU
Romania
ABP2-2082
272298
AEROSTAR SA
BACAU
Romania
ABP2-2336
272298
AEROSTAR SA
BACAU
Romania
ABP2-3093
272298
AEROSTAR SA
BACAU
Romania
ABP2-3097
272298
AEROSTAR SA
BACAU
Romania
ABP3-1116
272298
AEROSTAR SA
BACAU
Romania
ABP3-1118
272298
AEROSTAR SA
BACAU
Romania
ABP3-1119
272298
AEROSTAR SA
BACAU
Romania
ABP3-1120
272298
AEROSTAR SA
BACAU
Romania
ABP4-1123
Title (PS)
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF STEELS
HEAT TREATMENT OF RIVETS PRIOR
TO RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
Ref. No. (PI)
ABP2-1071
ABP2-1072
ABP2-2073
ABP2-2075
ABP2-2082
ABP2-2336
ABP2-3093
ABP2-3097
ABP3-1116
ABP3-1118
ABP3-1119
ABP3-1120
ABP4-1123
272298
AEROSTAR SA
BACAU
Romania
ABP4-2127
272298
AEROSTAR SA
BACAU
Romania
ABP4-2130
272298
AEROSTAR SA
BACAU
Romania
ABP4-5142
272298
AEROSTAR SA
BACAU
Romania
ABP6-3201
272298
AEROSTAR SA
BACAU
Romania
ABP6-3204
272298
AEROSTAR SA
BACAU
Romania
ABP6-3205
272298
AEROSTAR SA
BACAU
Romania
ABP6-3211
272298
AEROSTAR SA
BACAU
Romania
ABP6-5224
272298
AEROSTAR SA
BACAU
Romania
ABP6-5225
272298
AEROSTAR SA
BACAU
Romania
ABP6-5226
272298
AEROSTAR SA
BACAU
Romania
ABP6-5229
272298
AEROSTAR SA
BACAU
Romania
ABP6-5230
272298
AEROSTAR SA
BACAU
Romania
ABP8-2297
272298
AEROSTAR SA
BACAU
Romania
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
80-T-30-9910
272298
AEROSTAR SA
BACAU
Romania
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
80-T-35-2100
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
RECTIFICATION OF SCRATCHES ON
AN ALUMINIUM CLAD SURFACE
DURING FABRICATION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS BY
SWAGING
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
272298
AEROSTAR SA
BACAU
Romania
AIPS02-02-004
272298
AEROSTAR SA
BACAU
Romania
AIPS03-10-002
272298
AEROSTAR SA
BACAU
Romania
AIPS03-11-003
Airbus Qualified Special Process List (External Report)
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
RECTIFICATION OF METALLIC
MATERIALS BY ROLL FORMING
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
ABP4-2127
ABP4-2130
ABP4-5142
ABP6-3201
ABP6-3204
ABP6-3205
ABP6-3211
Couple qualification Status
Title (PI)
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF STEELS
HEAT TREATMENT OF RIVETS PRIOR
TO RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
RECTIFICATION OF SCRATCHES ON
AN ALUMINIUM CLAD SURFACE
DURING FABRICATION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS BY
SWAGING
NA
NOT APPLICABLE
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
ABP6-5225
ABP6-5226
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
None
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP8-2297
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
CHROMIC ACID ANODIZING
80-T-35-0205
SHOT PEENING
YES
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
NO
80-T-30-6919
VIBRATORY GRINDING
NO
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) HARDCHROME PARTS
ONLY; FOR ALLOY STEEL
INTERMEDIATE CORROSION
PROTECTION IS NECESSARY IF
FURTHER PROCESSING IS LATER
THAN 4HOURS IN ACCORDANCE WITH
80-T-35-570280-T-35-0205 SCOPE & LI
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
2015-02-02 - Page 37 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
272298
AEROSTAR SA
BACAU
Romania
AIPS03-11-003
272298
AEROSTAR SA
BACAU
Romania
AIPS04-01-001
272298
AEROSTAR SA
BACAU
Romania
AIPS05-02-002
272298
AEROSTAR SA
BACAU
Romania
AIPS05-04-005
272298
AEROSTAR SA
BACAU
Romania
AIPS05-05-003
272298
AEROSTAR SA
BACAU
Romania
AIPS05-05-004
272298
AEROSTAR SA
BACAU
Romania
AIPS08-03-002
272298
AEROSTAR SA
BACAU
Romania
AIPS09-01-002
272298
272298
AEROSTAR SA
AEROSTAR SA
BACAU
BACAU
Romania
Romania
Title (PS)
AITM6-1001
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
APPLICATION OF GAP FILLER - EASY
TO REMOVE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
Couple qualification Status
Ref. No. (PI)
Title (PI)
Special
Process
80-T-30-6918
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
NO
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
COATING WITH PAINTS AND
VARNISHES, GENERAL
APPLICATION OF SEALING
COMPOUNDS
80-T-35-9120
80-T-34-9600
YES
YES
80-T-35-9023
PRESERVATION OF RIVET ROWS
YES
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
PENETRANT TESTING
NA
NOT APPLICABLE
YES
Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
AITM6-2001
MAGNETIC PARTICLE INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF HARDCHROMIUM
PLATED PARTS ONLY
NA
NOT APPLICABLE
YES
3 - QUALIFIED
EXTENDED WORKBENCH ACTIVITIES
ONLY
272298
AEROSTAR SA
BACAU
Romania
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
272298
AEROSTAR SA
BACAU
Romania
AITM6-6006
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
272298
AEROSTAR SA
BACAU
Romania
QVA-Z10-31-00
ELECTRICAL TESTING OF BONDING
CONNECTIONS - GENERAL
QVA-Z10-31-00
ELECTRICAL TESTING OF BONDING
CONNECTIONS - GENERAL -
NO
3 - QUALIFIED
LIMITED TO METHOD A; LIMITED TO
EXTENDED WORKBENCH ACTIVITIES
(SEE AP2190.0 FOR DEFINITION)
QVA-Z10-50-01
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
QVA-Z10-50-01
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
272298
272298
272298
272298
305625
305625
305625
305625
305625
305625
305625
305625
305625
AEROSTAR SA
AEROSTAR SA
AEROSTAR SA
AEROSTAR SA
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
Airbus Qualified Special Process List (External Report)
BACAU
BACAU
BACAU
Romania
Romania
Romania
NA
NOT APPLICABLE
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
QVA-Z10-50-01
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
NO
3 - QUALIFIED
Limited to EWB of small sheet metals
Aluminium
QVA-Z10-50-03
THICKNESS MEASUREMENTS OF
ELECTRICALLY NON-CONDUCTING
LAYERS ON NON-FERROMAGNETIC
ALLOYS - CANCELLED AND REPLACED
BY AITM 6-6006
QVA-Z10-50-03
THICKNESS MEASUREMENTS OF
ELECTRICALLY NON-CONDUCTING
LAYERS ON NON-FERROMAGNETIC
ALLOYS - CANCELLED AND REPLACED
BY AITM 6-6006
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
THICKNESS MEASUREMENTS OF
ELECTRICALLY NON-CONDUCTING
LAYERS ON NON-FERROMAGNETIC
ALLOYS - CANCELLED AND REPLACED
BY AITM 6-6006
NA
NOT APPLICABLE
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
YES
3 - QUALIFIED
MANUAL METHOD
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
BACAU
Romania
QVA-Z10-50-03
BELGAUM
India
ABP1-5057
BELGAUM
India
ABP2-1065
BELGAUM
India
ABP2-1067
BELGAUM
India
ABP2-1069
BELGAUM
India
ABP2-1071
BELGAUM
India
ABP2-1072
BELGAUM
India
ABP2-2075
BELGAUM
India
ABP2-2079
BELGAUM
India
ABP2-2336
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
ABP1-5057
ABP2-1065
ABP2-1067
ABP2-1069
ABP2-1071
ABP2-1072
ABP2-2075
ABP2-2079
ABP2-2336
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 38 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
3 - QUALIFIED
NONE
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
3 - QUALIFIED
BRUSH AND SPRAY TOUCH-UP
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
SEMKITS (INCLUDING FREEZING), NO
BULK MIXING
YES
3 - QUALIFIED
METHODS 4, 7 & 13
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
305625
305625
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP4-2128
BELGAUM
India
ABP4-5142
BELGAUM
India
ABP5-1351
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP6-3201
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP6-3205
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP7-1245
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP7-1246
BELGAUM
India
ABP8-1294
BELGAUM
India
ABP8-1354
BELGAUM
India
ABP9-3323
BELGAUM
India
ABP9-4324
305625
305625
305625
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
SURFACE PREPARATION PRIOR TO
APPLICATION OF PAINTS
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
LOCAL CLEANING AND DEGREASING
USING AQUEOUS CLEANERS
INK MARKING GENERAL
CONTROL OF MARKING
SPECIFICATIONS
PROTECTION OF MARKING BY THE
APPLICATION OF POLYURETHANE
PAINTS AS OVERCOATING
ABP4-5142
ABP5-1351
ABP6-3201
ABP6-3205
ABP7-1245
ABP7-1246
ABP8-1294
ABP8-1294
ABP9-3323
ABP9-4324
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
SURFACE PREPARATION PRIOR TO
APPLICATION OF PAINTS
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
INK MARKING GENERAL
CONTROL OF MARKING
SPECIFICATIONS
PROTECTION OF MARKING BY THE
APPLICATION OF POLYURETHANE
PAINTS AS OVERCOATING
305625
AEROSTRUCTURES
ASSEMBLIES INDIA PVT
BELGAUM
India
ABP9-4325
293918
AEROSTRUCTURES
MANUFACTURING INDIA PVT
LTD ASM
BELGAUM
India
80-T-30-6918
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
80-T-30-6918
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
NO
3 - QUALIFIED
MANUAL DEBURRING ONLY
293918
AEROSTRUCTURES
MANUFACTURING INDIA PVT
LTD ASM
BELGAUM
India
80-T-35-5702
PRESERVATION FOR INTERMEDIATE
STORAGE
80-T-35-5702
PRESERVATION FOR INTERMEDIATE
STORAGE
TBD
3 - QUALIFIED
BRUSH APPLICATION ONLY
293918
AEROSTRUCTURES
MANUFACTURING INDIA PVT
LTD ASM
BELGAUM
India
80-T-39-0134
MAKING BY VIBRO - ENGRAVING
80-T-39-0134
MAKING BY VIBRO - ENGRAVING
NO
3 - QUALIFIED
NONE
293918
AEROSTRUCTURES
MANUFACTURING INDIA PVT
LTD ASM
BELGAUM
India
80-T-39-0501
PREVENTION OF CORROSION DURING
PRODUCTION
80-T-39-0501
PREVENTION OF CORROSION DURING
PRODUCTION
TBD
3 - QUALIFIED
BRUSH APPLICATION ONLY
293918
AEROSTRUCTURES
MANUFACTURING INDIA PVT
LTD ASM
BELGAUM
India
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
3 - QUALIFIED
LIMITED TO THE ASSEMBLY OF PART
NUMBERS D57250830200 / 201.
135090
AEROSUD AVIATION PTY LTD
South Africa
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
A400M
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP1-5057
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-1065
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-1068
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-1072
TBD
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-2073
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-2075
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-2082
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-2336
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP2-3097
135090
AEROSUD AVIATION PTY LTD
Airbus Qualified Special Process List (External Report)
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
ABP9-4325
ABP1-5057
ABP2-1065
ABP2-1068
ABP2-1072
ABP2-2073
ABP2-2075
ABP2-2082
ABP2-2336
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
PREPARATION OF COUNTERSUNK
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
ABP2-3097
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
FASTENING AND RIVETING
TUNGSTEN INERT GAS ( TIG )
TUNGSTEN INERT GAS ( TIG )
ABP2-4102
ABP2-4102
WELDING
WELDING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/09/2015
2 - AUTHORISATION TO
PROCEED UNTIL 30/09/2015
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
2015-02-02 - Page 39 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ABP2-4355
ACCEPTANCE STANDARDS FOR
TUNGSTEN INERT GAS ( T.I.G.) &
PLASMA ARC WELDING ( P.A.W.)
PROCESSES
ABP2-4355
ACCEPTANCE STANDARDS FOR
TUNGSTEN INERT GAS ( T.I.G.) &
PLASMA ARC WELDING ( P.A.W.)
PROCESSES
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP3-1120
TBD
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-1123
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-2124
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-2126
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-2130
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-2133
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-3329
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-4140
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-5141
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-5142
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP4-5144
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP5-1153
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP6-3201
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP6-3203
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP6-3205
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP6-4221
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP7-1245
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP7-1246
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
ABP7-1246
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP7-1254
TORQUE TIGHTENING OF ELECTRICAL
CONNECTIONS AND COMPONENTS
DURING ASSEMBLY
135090
AEROSUD AVIATION PTY LTD
South Africa
ABP8-1296
135090
AEROSUD AVIATION PTY LTD
South Africa
135090
AEROSUD AVIATION PTY LTD
South Africa
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP3-1120
ABP4-1123
ABP4-2124
ABP4-2126
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/09/2015
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/09/2015
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
YES
3 - QUALIFIED
NONE
ABP7-1254
TORQUE TIGHTENING OF ELECTRICAL
CONNECTIONS AND COMPONENTS
DURING ASSEMBLY
NO
3 - QUALIFIED
NONE
DEOXIDATION OF ALUMINIUM ALLOYS
ABP8-1296
DEOXIDATION OF ALUMINIUM ALLOYS
TBD
3 - QUALIFIED
NONE
ABP8-2297
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
ABP8-2297
NO
3 - QUALIFIED
NONE
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
YES
3 - QUALIFIED
TECHNICAL QUALIFICATION BASE ON
ADET 0079 + ADET 0071
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF EROSION RESISTANT
PAINT
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
STRIPPING OF PAINTS BY CHEMICAL
METHODS
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
AUTOMATED DEBURRING DURING
FABRICATION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
ABP4-2130
ABP4-2133
ABP4-3329
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF EROSION RESISTANT
PAINT
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
NA
ABP4-5141
ABP4-5142
ABP4-5144
ABP5-1153
ABP6-3201
ABP6-3203
ABP6-3205
ABP6-4221
ABP7-1245
NOT APPLICABLE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
AUTOMATED DEBURRING DURING
FABRICATION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-02-STQ-07-IP2-259-A0)
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-02-STQ-09-IP2-259-A0)
TBD
3 - QUALIFIED
TECHNICAL QUALIFICATION BASED ON
AIRBUS UK REQUIREMENTS
FOR 120VU AND 80VU (SA
PROGRAMME)
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0078
STRUCTURAL RIVETING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-09-IP2-259-A0)
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-06-IP2-259-A0)
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
South Africa
ADET0074
GENERAL REQUIREMENTS ON
WELDING ( ALL MATERIALS )
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 40 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0092
PAINTING FOR DETAIL PARTS IN
COMPOSITE MATERIALS ( EXCEPT
FURNISHING CABIN INTERIOR )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-05-STQ-07-IP2-259-A0)
YES
3 - QUALIFIED
TECHNICAL QUALIFICATION BASE ON
ADET 0092
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0114
ELECTRICAL BONDING PROCESSES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF83-11-STQ-06-IP2-259-A0)
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0134
INSTALLATION OF BLIND FASTENERS
IPDA71-14
INSTALLATION OF BLIND FASTENERS
NAS 1919 - 1921
YES
3 - QUALIFIED
NO REPAIR AND OVERSIZING
ALLOWED.
ONLY NSA1919 WILL BE INSTALLED,
NO WET INSTALLATION OF
FASTENERS, NO COUNTERSINKS
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(MB006-25 ISSUE A)
YES
3 - QUALIFIED
A320 ELECTRICAL RACKS (VIA
LABINAL)
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STQ-06-IP2-259-A0)
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0191
INSTALLATION OF BALL BEARING,
SPHERICAL BEARING AND BUSHING
BY STAKING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-06-STQ-04-IP2-259-A0)
YES
3 - QUALIFIED
A320 ELECTRICAL RACKS
(VIA LABINAL)
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
ADET0203
TIG WELDING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-02-STQ-09-IP2-259-A0)
TBD
3 - QUALIFIED
TECHNICAL QUALIFICATION BASED ON
AIRBUS UK REQUIREMENTS
FOR 120VU AND 80VU (SA
PROGRAMME)
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-09-IP2-259-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0078 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2073
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2073 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-09-IP2-259-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0078 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-07-IP2-259-A0)
YES
3 - QUALIFIED
TECHNICAL QUALIFICATION BASE ON
ADET 0173
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS01-03-003
YES
3 - QUALIFIED
A400M
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS01-04-008
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS01-04-018
INSTALLATION OF INSERTS IN NON
METALLICS
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
PLASMA ARC WELDING (PAW) OF
METALLIC MATERIALS
AIPI01-03-003
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLATION OF INSERTS IN NONMETALLIC
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
NONE
ABP2-4355
ACCEPTANCE STANDARDS FOR
TUNGSTEN INERT GAS ( T.I.G.) &
PLASMA ARC WELDING ( P.A.W.)
PROCESSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-4355 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(RP0900124-EQUERT
DCP 259.020.02-ST01 ISSUE A
RÉF: 127639 QUALIF62-02-STQ-07 PART
259
VERS A0)
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS02-05-001
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-07-IP2-259-A0)
YES
3 - QUALIFIED
TECHNICAL QUALIFICATION BASE ON
ADET 0079 + ADET 0071
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 41 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS03-02-008
THERMOFORMING OF
THERMOPLASTIC SHEET MATERIALS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF48-ST02-STQ-09-IP2-259-A0)
YES
3 - QUALIFIED
“QUALIFIED ONLY FOR”
NON STRUCTURAL COMPOSITE ONLY
A400M WPS: M25830-COCKPIT
LININGS, M25850COCKPIT RIGID BULHEAD, M25851- NF
EMI LININGS
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
AIPI03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
YES
2 - AUTHORISATION TO
PROCEED UNTIL 20/02/2015
THE CONSOLIDATION PROCESS IS
NOT PERFORMED AT AEROSUD
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
AIPI03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS03-03-002
DIMPLING
NO_AIRBUS_PI
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS03-03-006
WATER JET CUTTING
REF00000309
NO
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
NO_AIRBUS_PI
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS03-07-023
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS03-07-024
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS03-11-003
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
MANUFACTURE OF SANDWICH PARTS
WITH THERMOSETTING FIBRE
REINFORCED SKINS FOR INTERIOR
APPLICATION
MANUFACTURE OF FIBRE
REINFORCED MONOLITHIC PARTS
WITH THERMOSETTING PREPREG
MATERIAL FOR INTERIOR
APPLICATION
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF42-06-STQ-07-IP2-259-A0)
ATTESTATION OF PROCESS
QUALIFICATION
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF35-01-STQ-09-IP2-259-A0)
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(RP1000130-EQUERT)
YES
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(RP1000130-EQUERT)
YES
3 - QUALIFIED
NONE
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-07-STQ-07-IP2-259-A0)
NO
3 - QUALIFIED
MANUAL AND VIBERTING DEBURRING
ON: ALUMINIUM ALLOYS AND
STAINLESS STEELS
MANUAL: NONE STRUTURAL
COMPOSITE
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF61-01-STQ-06-IP2-259-A0)
YES
3 - QUALIFIED
NONE
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
TECHNICAL QUALIFICATION BASE ON
ADET0072; ADET0079 + ADET0071;
ADET0092
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-01-001
APPLICATION OF BASIC PRIMER
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-259-A0;
QUALIF62-21-STQ-07-IP2-259-A0;
QUALIF64-02-STQ-07-IP2-259-A0;
QUALIF64-05-STQ-07-IP2-259-A0)
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
Airbus Qualified Special Process List (External Report)
South Africa
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 42 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-02-STQ-07-IP2-259-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
TECHNICAL QUALIFICATION BASE ON
ADET 0079 + ADET 0071ADET0071
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
South Africa
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
South Africa
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-06-IP2-259-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
South Africa
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-005
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
ABP6-4221
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-4221 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-06-IP2-259-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-06-IP2-259-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS06-02-002
YES
3 - QUALIFIED
NONE
135090
AEROSUD AVIATION PTY LTD
South Africa
AIPS07-01-001
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
ARP-ID
Company Name
City
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
135090
AEROSUD AVIATION PTY LTD
135090
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
South Africa
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
AIPS05-02-013
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
South Africa
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
135090
AEROSUD AVIATION PTY LTD
PIERRE VAN
RYNEVELD,
CENTURION
135090
AEROSUD AVIATION PTY LTD
135090
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
Airbus Qualified Special Process List (External Report)
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
Country
NON-STRUCTURAL ADHESIVE
BONDING
MANUFACTURING AND INSTALLATION
OF CABLE HARNESSES
ME0909501
AIPI07-01-001
ATTESTATION OF PROCESS
QUALIFICATION
MANUFACTURING AND INSTALLATION
OF CABLE HARNESS
South Africa
AIPS07-01-002
GENERAL REQUIREMENTS FOR THE
INSERTION AND EXTRACTION OF
REMOVABLE CONTACTS IN
ELECTRICAL CONNECTING SYSTEMS
South Africa
AIPS07-01-003
CABLE TYING WITH NSA935401 OR
NSA8420
AIPI07-01-003
South Africa
AIPS07-01-004
TIGHTENING PROCEDURES FOR
ELECTRICAL EQUIPMENT
AIPI07-01-004
South Africa
AIPS07-01-007
INSTALLATION OF SOLDER SLEEVES
AIPI07-01-007
INSTALLATION OF SOLDER SLEEVES
YES
3 - QUALIFIED
NONE
South Africa
AIPS07-01-009
INSTALLATION OF BACKSHELLS
AIPI07-01-009
INSTALLATION OF BACKSHELLS
NO
3 - QUALIFIED
NONE
South Africa
AIPS07-02-001
YES
3 - QUALIFIED
NONE
South Africa
AIPS07-03-001
YES
3 - QUALIFIED
NONE
South Africa
AIPS07-05-032
NO
3 - QUALIFIED
NONE
South Africa
AIPS07-05-047
YES
3 - QUALIFIED
NONE
GENERAL REQUIREMENTS FOR THE
STRIPPING OF ELECTRICAL CABLES
GENERAL REQUIREMENTS FOR
CRIMPING OF ELECTRICAL CONTACTS
INSTALLATION OF CONNECTORS
EN2997 AND EN3645
FITTING OF METALLIC CLAMP STRIPS
ASNE0805
AIPI07-01-002
AIPI07-02-001
AIPI07-03-001
AIPI07-05-032
AIPI07-05-047
INSERTION AND EXTRACTION OF
REMOVABLE CONTACTS IN
ELECTRICAL CONNECTING SYSTEMS
CABLE TYING WITH CABLE TIES
NSA935401 OR LACING TAPES
NSA8420
TIGHTENING PROCEDURE FOR
ELECTRICAL EQUIPMENT
STRIPPING OF THE ELECTRICAL
CABLES
CRIMPING OF CONTACTS TO COPPER
CABLES
INSTALLATION OF CONNECTORS
EN2997 AND EN3645
USE OF METALLIC CLAMPING STRIP
ASNE0805
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 43 of 876
External Shop
ARP-ID
Company Name
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
135090
AEROSUD AVIATION PTY LTD
285821
AEROTECH
285821
AEROTECH
271381
271381
271381
271381
297632
297632
297632
297632
297632
297632
297632
AEROTECH INSPECTION AND
NDT LIMITED
AEROTECH INSPECTION AND
NDT LIMITED
AEROTECH INSPECTION AND
NDT LIMITED
AEROTECH INSPECTION AND
NDT LIMITED
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
Process Specification(PS) / Process Instruction (PI)
City
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE
VAN
RYNEVELD,
CENTURION
Country
Ref. No. (PS)
Title (PS)
South Africa
AIPS07-06-002
South Africa
AIPS07-07-001
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATIONS
INSTALLATION OF HEAT SHRINK
TUBING AND SLEEVES
South Africa
AIPS07-07-002
FLEXIBLE TEXTILE SHEATHS EN6049003 TO EN6049-009, ASNE0559 AND
ABS0596 FOR EXTERNAL PROTECTION
OF ELECTRICAL CABLES
South Africa
AIPS08-03-002
PERMANENT MARKING WITH INK
South Africa
IGC04-63-100
South Africa
IGC04-63-105
LA MARSA
Tunisia
AIPS02-05-003
LA MARSA
Tunisia
AIPS02-05-005
CRADLEY HEATH
United Kingdom
ABP6-5229
CRADLEY HEATH
United Kingdom
ABP6-5230
CRADLEY HEATH
United Kingdom
ABP6-5346
CRADLEY HEATH
United Kingdom
AITM6-7002
LA RINCONADA
Spain
AIPS01-01-004
LA RINCONADA
Spain
AIPS01-02-008
LA RINCONADA
Spain
AIPS01-02-013
LA RINCONADA
Spain
AIPS03-07-002
LA RINCONADA
Spain
AIPS03-07-002
LA RINCONADA
Spain
AIPS03-07-002
LA RINCONADA
Spain
AIPS05-05-001
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
PIERRE VAN
RYNEVELD,
CENTURION
QUALIFICATION OF HEAT TREATMENT
AND CURING INSTALLATIONS
PERIODIC INSPECTION OF HEAT
TREATMENT AND POLYMERIZATION
INSTALLATIONS
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
PASSIVATION OF CORROSION
RESISTANT STEEL
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
TESTING BY RADIOGRAPHY
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
INSTALLATION OF SOLID RIVETS
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
Ref. No. (PI)
AIPI07-06-002
AIPI07-07-001
Couple qualification Status
Title (PI)
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATION
INSTALLATION OF HEAT-SHRINKABLE
COMPONENTS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
AIPI07-07-002
TEXTILE SHEATHS FOR PROTECTION
OF ELECTRICAL CABLES
YES
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF28-04-STQ-07-IP2-259-A0)
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
OVEN : AS225
NONE STRUCTURAL PART
NA
NOT APPLICABLE
NO
3 - QUALIFIED
OVEN : AS225
NONE STRUCTURAL PART
YES
3 - QUALIFIED
UNIQUEMENT CAS 2 DE L'AIPS
YES
3 - QUALIFIED
MARTENSITIC AND AUSTENITIC STEEL
WITH RM<1100MPA
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-45-STQ-348-IP2-A0)
PASSIVATION OF CORROSION
RESISTANT STEEL
NO_AIRBUS_PI
AIPI02-05-005
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
NONE
AIPI01-02-008
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
YES
3 - QUALIFIED
MANUAL APPLICATION; NO
EXTENSIONS OR ADAPTATORS
ALLOWED
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
AIPI01-02-013
I+D-P-231
INSTALLATION OF BLIND BOLTS PULLTYPE
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
I+D-P-387
MACHINING COMPOSITES
YES
3 - QUALIFIED
NONE
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
3 - QUALIFIED
NONE
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
ONLY MANUAL MIXING UP TO 0.5KG
297632
AEROTECNIC DEL SUR GRUPO
MECATECNIC
LA RINCONADA
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
MANUAL APPLICATION WITH BRUSH
297632
AEROTECNIC DEL SUR GRUPO
MECATECNIC
LA RINCONADA
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
ONLY MANUAL MIXING OF SEALANT
UP TO 0.5KG
297632
AEROTECNIC DEL SUR GRUPO
MECATECNIC
LA RINCONADA
Spain
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NO CAPACITIVE IMPEDANCE
MEASUREMENT ALLOWED. NO
ACCELERATED CURING METHOD
ALLOWED.
LA RINCONADA
Spain
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
AIPI06-02-002
NON STRUCTURAL ADHESIVE
BONDING
YES
3 - QUALIFIED
AITM6-5003 & 5002 NOT QUALIFIED
LA RINCONADA
Spain
AITM6-3004
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
LA RINCONADA
Spain
AITM6-4005
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS131125
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS140030
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS131264
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
I+D-E-280
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
NO
3 - QUALIFIED
LIMITED TO A380 RUDDER AND
ELEVATOR PANELS ACCORDING TO
QCS131125
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
2015-02-02 - Page 44 of 876
297632
297632
297632
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
297632
AEROTECNIC DEL SUR GRUPO
MECATECNIC
LA RINCONADA
Spain
AITM6-4010
297632
AEROTECNIC DEL SUR GRUPO
MECATECNIC
LA RINCONADA
Spain
AITM6-4022
LA RINCONADA
Spain
AITM6-5003
LA RINCONADA
Spain
AITM6-9003
LA RINCONADA
Spain
I+D-E-280
CENTURION
South Africa
ABP6-5230
CENTURION
South Africa
ABP6-5346
297632
297632
297632
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AEROTECNIC DEL SUR GRUPO
MECATECNIC
AFRICAN NDT CENTRE PTY
LIMITED
AFRICAN NDT CENTRE PTY
270602
LIMITED
Airbus Qualified Special Process List (External Report)
270602
VISUAL INSPECTION
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
INSPECTION OF FIBRE COMPOSITES
BY ULTRASONIC PHASED ARRAY
TECHNIQUE
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
TAP TEST
LEAK TEST FOR SANDWICH
STRUCTURES
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
TESTING BY PENETRANT FLAW
DETECTION
TESTING BY RADIOGRAPHY
NA
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
270602
AFRICAN NDT CENTRE PTY
LIMITED
CENTURION
South Africa
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
3 - QUALIFIED
THERMOPLASTIC CARBON FIBRE
REINFORCED A350XWB PARTS (6 TO
14 PLIES THICKNESS) ACCORDING TO
QTP ENG1103523-3-ISSUE3 : TYPE 1-A /
TYPE1-A JOGGLED / TYPE1-A WITH
FIBERGLASS / STABILIZER / TYPE 3 /
TYPE 3 JOGGLED / TYPE5-A SPLICE
(FRAME 41 & 71) / TYPE5-A SPL
270602
270602
270602
135554
135554
135554
238369
AFRICAN NDT CENTRE PTY
LIMITED
AFRICAN NDT CENTRE PTY
LIMITED
AFRICAN NDT CENTRE PTY
LIMITED
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
CENTURION
South Africa
AITM6-4005
CENTURION
South Africa
AITM6-4010
CENTURION
South Africa
AITM6-7002
TAICHUNG CITY
Taiwan
80-T-30-0032
TAICHUNG CITY
Taiwan
80-T-30-4010
TAICHUNG CITY
Taiwan
80-T-30-6918
TAICHUNG
Taiwan
80-T-30-6918
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
80-T-30-9910
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
80-T-30-9910
TAICHUNG CITY
Taiwan
80-T-31-2909
TAICHUNG
Taiwan
80-T-31-2909
135554
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
INSPECTION OF FIBRE COMPOSITES
BY ULTRASONIC PHASED ARRAY
TECHNIQUE
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
MACHINING OF FRP COMPONENTS
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
MANUFACTURE OF SANDWICH
COMPONENTS
MANUFACTURE OF SANDWICH
COMPONENTS
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
NA
NOT APPLICABLE
YES
NA
NOT APPLICABLE
YES
3 - QUALIFIED
THERMOPLASTIC CARBON FIBRE
REINFORCED A350XWB PARTS (6 TO
14 PLIES THICKNESS) ACCORDING TO
QTP ENG1103523-2-ISSUE3: TYPE 1-A /
TYPE1-A JOGGLED / TYPE1-A WITH
FIBERGLASS / STABILIZER / TYPE 3 /
TYPE 3 JOGGLED / TYPE5-A SPLICE
(FRAME 41 & 71) / TYPE5-A SPLI
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
80-T-30-0032
MACHINING OF FRP COMPONENTS
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
80-T-30-4010
80-T-30-6918
80-T-30-6918
80-T-30-9910
80-T-30-9910
80-T-31-2909
80-T-31-2909
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
MANUFACTURE OF SANDWICH
COMPONENTS
MANUFACTURE OF SANDWICH
COMPONENTS
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
80-T-31-2910
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
80-T-31-2910
TAICHUNG CITY
Taiwan
80-T-31-2916
TAICHUNG
Taiwan
80-T-31-2916
TAICHUNG CITY
Taiwan
80-T-31-2950
TAICHUNG
Taiwan
80-T-31-2950
TAICHUNG CITY
Taiwan
80-T-32-1000
TAICHUNG CITY
Taiwan
80-T-33-3010
TAICHUNG
Taiwan
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-34-5661
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
80-T-34-5661
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-34-5804
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
NO
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
NO
3 - QUALIFIED
NONE
2015-02-02 - Page 45 of 876
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
135554
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
135554
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
135554
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
135554
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
135554
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
135554
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
135554
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
Airbus Qualified Special Process List (External Report)
135554
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
80-T-31-2910
80-T-31-2910
80-T-31-2916
80-T-31-2916
80-T-31-2950
80-T-31-2950
80-T-32-1000
80-T-33-3010
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
BEHANDLUNG VON AL-VOLLNIETEN
BEHANDLUNG VON AL-VOLLNIETEN
80-T-34-5804
VOR DEM SETZEN
VOR DEM SETZEN
BEHANDLUNG VON AL-VOLLNIETEN
BEHANDLUNG VON AL-VOLLNIETEN
80-T-34-5804
80-T-34-5804
VOR DEM SETZEN
VOR DEM SETZEN
INSTALLATION OF SOLID ALUMINUM
INSTALLATION OF SOLID ALUMINUM
80-T-34-5814
80-T-34-5814
RIVETS
RIVETS
INSTALLATION OF SOLID ALUMINUM
INSTALLATION OF SOLID ALUMINUM
80-T-34-5814
80-T-34-5814
RIVETS
RIVETS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
ARP-ID
238369
238369
135554
238369
135554
238369
135554
238369
135554
135554
238369
135554
238369
135554
135554
135554
135554
135554
135554
238369
135554
238369
238369
238369
135554
238369
Company Name
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
TAICHUNG
Taiwan
80-T-34-5815
INSTALLATION OF HI-LOKS
80-T-34-5815
INSTALLATION OF HI-LOKS
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-34-5831
INSTALLATION OF POP BLIND RIVETS
80-T-34-5831
INSTALLATION OF POP BLIND RIVETS
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-34-9000
BONDING OF STRUCTURES
80-T-34-9000
BONDING OF STRUCTURES
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-34-9000
BONDING OF STRUCTURES
80-T-34-9000
BONDING OF STRUCTURES
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-34-9032
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-34-9032
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-34-9600
YES
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-34-9600
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-35-0014
NO
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-35-0014
NO
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-35-0014
NO
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-35-0019
NO
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-35-0019
NO
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-35-0020
NO
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-35-0100
TAICHUNG CITY
Taiwan
80-T-35-1101
TAICHUNG CITY
Taiwan
80-T-35-2000
TAICHUNG CITY
Taiwan
80-T-35-2100
TAICHUNG CITY
Taiwan
80-T-35-5002
TAICHUNG
Taiwan
80-T-35-5002
TAICHUNG CITY
Taiwan
80-T-35-5106
TAICHUNG
Taiwan
80-T-35-5106
TAICHUNG
Taiwan
80-T-35-5218
TAICHUNG
Taiwan
80-T-35-5903
TAICHUNG CITY
Taiwan
80-T-35-9120
TAICHUNG
Taiwan
80-T-35-9120
BONDING OF NON-STRUCTURAL
CONNECTIONS
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH EMULSION CLEANING
AGENTS
CLEANING WITH EMULSION CLEANING
AGENTS
ALKALINE CLEANING
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
CHROMIC ACID ANODIZING
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COAT
COATING WITH PUR - BASED TOP
COAT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
COATING WITH PAINTS AND
VARNISHES, GENERAL
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-34-9032
80-T-34-9032
80-T-34-9600
80-T-34-9600
80-T-35-0014
80-T-35-0014
80-T-35-0014
80-T-35-0019
80-T-35-0019
BONDING OF NON-STRUCTURAL
CONNECTIONS
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH EMULSION CLEANING
AGENTS
CLEANING WITH EMULSION CLEANING
AGENTS
80-T-35-0020
80-T-35-0100
80-T-35-1101
80-T-35-2000
ALKALINE CLEANING
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
CHROMIC ACID ANODIZING
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
80-T-35-2100
80-T-35-5002
80-T-35-5002
80-T-35-5106
80-T-35-5106
80-T-35-5218
80-T-35-5903
80-T-35-9120
80-T-35-9120
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COAT
COATING WITH PUR - BASED TOP
COAT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
COATING WITH PAINTS AND
VARNISHES, GENERAL
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
80-T-35-9124
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
YES
3 - QUALIFIED
NONE
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
80-T-39-0121
INTRODUCTION OF CORE AND EDGE
FILLER COMPOUNDS INTO SANDWICH
COMPONENTS
80-T-39-0121
INTRODUCTION OF CORE AND EDGE
FILLER COMPOUNDS INTO SANDWICH
COMPONENTS
YES
3 - QUALIFIED
NONE
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
80-T-39-0121
INTRODUCTION OF CORE AND EDGE
FILLER COMPOUNDS INTO SANDWICH
COMPONENTS
80-T-39-0121
INTRODUCTION OF CORE AND EDGE
FILLER COMPOUNDS INTO SANDWICH
COMPONENTS
YES
3 - QUALIFIED
NONE
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
NONE
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
80-T-39-0141
APPLICATION AND PROTECTION OF
IDENTIFICATION AND PLATES AND
PLACARDS
80-T-39-0141
APPLICATION AND PROTECTION OF
IDENTIFICATION AND PLATES AND
PLACARDS
NO
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
80-T-40-3312
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
NO
3 - QUALIFIED
NONE
TAICHUNG
Taiwan
80-T-40-3312
ELECTRICAL BONDING
NO
3 - QUALIFIED
NONE
2015-02-02 - Page 46 of 876
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
238369
DEVELOPMENT CORPORATION
Airbus Qualified Special Process List (External Report)
135554
80-T-35-9124
ELECTRICAL BONDING
80-T-40-3312
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5814 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
80-T-30-0032
MACHINING OF FRP COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
none
TAICHUNG
Taiwan
AIPS01-02-017
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
TYPE 1 A+B ACCORDING TO AP3145-E
TAICHUNG
Taiwan
AIPS01-02-017
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
TYPE 1 A+B ACCORDING TO AP3145-E
238369
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5814 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
I+D-P-213
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
YES
3 - QUALIFIED
VALID FOR CHROMIC ANODIZING 20 V
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2909
MANUFACTURE OF SANDWICH
COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2909 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2909
MANUFACTURE OF SANDWICH
COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2909 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
TAICHUNG CITY
TAICHUNG
TAICHUNG CITY
Taiwan
Taiwan
Taiwan
Taiwan
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
80-T-30-0032
MACHINING OF FRP COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-0032 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 47 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS03-07-026
FILLING AND SPLICING OF SANDWICH
PANEL HONEYCOMB CORES FOR
INTERIOR PARTS
80-T-39-0121
INTRODUCTION OF CORE AND EDGE
FILLER COMPOUNDS INTO SANDWICH
COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0121 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS03-07-026
FILLING AND SPLICING OF SANDWICH
PANEL HONEYCOMB CORES FOR
INTERIOR PARTS
80-T-39-0121
INTRODUCTION OF CORE AND EDGE
FILLER COMPOUNDS INTO SANDWICH
COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0121 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
80-T-31-2916
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2916 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
80-T-31-2916
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2916 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
2024 MATERIAL ONLY CONDITION T42
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
238369
238369
238369
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
TAICHUNG
Taiwan
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
TAICHUNG
Taiwan
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
I+D-P-220
TAICHUNG
Taiwan
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-064
TAICHUNG
Taiwan
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-358
TAICHUNG
Taiwan
AIPS05-02-009
TAICHUNG
Taiwan
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
I+D-P-358
I+D-P-064
HEAT TREATMENTS OF ALUMINIUM
ALLOYS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
PAINTING OF COMPOSITE DETAIL
PARTS
PAINTING OF COMPOSITE DETAIL
PARTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS05-02-011
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS05-02-011
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS05-04-005
APPLICATION OF GAP FILLER - EASY
TO REMOVE
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS05-05-004
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5803 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
80-T-34-9032
BONDING OF NON-STRUCTURAL
CONNECTIONS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9032 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
80-T-34-9032
BONDING OF NON-STRUCTURAL
CONNECTIONS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9032 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS06-02-005
MANUFACTURING OF METALLIC
SANDWICH PARTS - BONDING
PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS06-02-005
MANUFACTURING OF METALLIC
SANDWICH PARTS - BONDING
PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
80-T-35-9124
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 48 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS06-02-007
BONDING METAL / METAL PARTS
STRUCTURAL BONDING PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS06-02-007
BONDING METAL / METAL PARTS
STRUCTURAL BONDING PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS08-03-002
PERMANENT MARKING WITH INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0132 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS09-01-002
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0014 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0019
CLEANING WITH EMULSION CLEANING
AGENTS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0019 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0019
CLEANING WITH EMULSION CLEANING
AGENTS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0019 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS09-01-011
ALKALINE DEGREASING
I+D-P-072
CLEANING AND PICKLING OF
ALUMINIUM AND ITS ALLOYS
YES
3 - QUALIFIED
NONE
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
AIPS09-03-001
CHEMICAL MILLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
I+D-P-152
FRESADO QUIMICO DEL ALUMINIO Y
SUS ALEACIONES
NO
3 - QUALIFIED
TYPE II: THE TYPE I PROCESS IS USED
THE ONLY STEP OF MILLING BEFORE
TYPE II PROCESS. NIPPI DO NOT
APPLY TYPE I TO THE FINAL FINISH
SURFACE
TAICHUNG CITY
Taiwan
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
TAICHUNG CITY
Taiwan
AITM6-4011
ULTRASONIC INSPECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
TYPE I, METHOD A
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-31-00
ELECTRICAL TESTING OF BONDING
CONNECTIONS - GENERAL -
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
238369
135554
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
135554
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG CITY
Taiwan
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
I+D-E-137
PENETRANT INSPECTION PROCESS
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
TAICHUNG
Taiwan
I+D-E-140
TAICHUNG
Taiwan
QVA-Z10-31-00
TAICHUNG
Taiwan
QVA-Z10-31-00
238369
238369
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
AIDC AEROSPACE INDUSTRIAL
DEVELOPMENT CORPORATION
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP0-2017
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1065
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1066
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1067
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1068
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1069
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1070
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1072
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-1347
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2073
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2074
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2075
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2076
Airbus Qualified Special Process List (External Report)
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
ELECTRICAL TESTING OF BONDING
CONNECTIONS - GENERAL
ELECTRICAL TESTING OF BONDING
CONNECTIONS - GENERAL
SUPPLY OF ALUMINIUM PLATE WITH
ULTRASONIC FLAW DETECTION
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
AUTOMATED RIVETING OF ALUMINIUM
STRUCTURE WITH SLUG RIVETS (
LVER )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL RIVETING OF ALUMINIUM
STRUCTURE WITH SLUG RIVETS
(LVER HAND GUNS) INTO DOUBLE
COUNTERSINK HOLES
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
ABP2-1065
ABP2-1066
ABP2-1067
ABP2-1068
ABP2-1069
ABP2-1070
ABP2-1072
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
AUTOMATED RIVETING OF ALUMINIUM
STRUCTURE WITH SLUG RIVETS (
LVER )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
ABP2-1347
ABP2-2073
ABP2-2074
ABP2-2075
ABP2-2076
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
MANUAL RIVETING OF ALUMINIUM
STRUCTURE WITH SLUG RIVETS
(LVER HAND GUNS) INTO DOUBLE
COUNTERSINK HOLES
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
2015-02-02 - Page 49 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2077
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2078
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2079
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2080
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2081
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2083
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2084
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2085
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2086
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2336
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-2337
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3088
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3089
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3090
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3091
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3092
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3093
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3094
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3095
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP2-3097
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-1121
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-1123
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2124
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2125
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2128
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2130
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2131
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2133
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2361
Airbus Qualified Special Process List (External Report)
Title (PS)
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
MANUAL FASTENING WITH BLIND
BOLTS ( JO-BOLTS )
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
II AUTOMATED FASTENING WITH
STUMP TYPE LOCKBOLTS
MANUFACTURE OF SERRATED
FASTENING PARTS FOR LOCKING (
STA-LOK NUT )
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
INSTALLING METALLIC INSERTS (
RIVNUTS )
INSTALLING METALLIC INSERTS (
SHUR-LOK - HOT MELT )
INSTALLING ALUMINIUM TWO-PART
INSERTS ( SHUR-LOK )
LOCKING AND REMOVAL OF
SERRATED FASTENING PARTS ( STALOK NUT )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
INSTALLING METALLIC INSERTS (
SHUR-TAB )
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
Ref. No. (PI)
ABP2-2077
ABP2-2078
ABP2-2079
ABP2-2080
ABP2-2081
ABP2-2083
ABP2-2084
ABP2-2085
ABP2-2086
ABP2-2336
ABP2-2337
ABP2-3088
ABP2-3089
ABP2-3090
ABP2-3091
ABP2-3092
ABP2-3093
ABP2-3094
ABP2-3095
ABP2-3097
ABP4-1121
ABP4-1123
ABP4-2124
ABP4-2125
Couple qualification Status
Title (PI)
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
MANUAL FASTENING WITH BLIND
BOLTS ( JO-BOLTS )
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
II AUTOMATED FASTENING WITH
STUMP TYPE LOCKBOLTS
MANUFACTURE OF SERRATED
FASTENING PARTS FOR LOCKING (
STA-LOK NUT )
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
INSTALLING METALLIC INSERTS (
RIVNUTS )
INSTALLING METALLIC INSERTS (
SHUR-LOK - HOT MELT )
INSTALLING ALUMINIUM TWO-PART
INSERTS ( SHUR-LOK )
LOCKING AND REMOVAL OF
SERRATED FASTENING PARTS ( STALOK NUT )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
INSTALLING METALLIC INSERTS (
SHUR-TAB )
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
ABP4-2130
ABP4-2131
ABP4-2133
ABP4-2361
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 50 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-3135
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-3138
NO
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-3329
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-3350
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-5142
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-5143
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-5144
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP4-5365
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1146
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1147
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1148
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1149
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1152
NO
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1153
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1155
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1158
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1159
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1160
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1162
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1164
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP5-1165
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2184
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2185
MANUFACTURE OF CARBON-FIBRE
EPOXY PREPREG COMPOSITES BY
AUTOCLAVE
ABP6-2185
MANUFACTURE OF CARBON-FIBRE
EPOXY PREPREG COMPOSITES BY
AUTOCLAVE
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2186
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES
(BSL 312)
ABP6-2186
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES
(BSL 312)
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2187
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES
(R382)
ABP6-2187
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES
(R382)
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2188
MANUFACTURE OF GLASS-FIBRE
EPOXY PREPREG COMPOSITES BY
VACUUM BAG
ABP6-2188
MANUFACTURE OF GLASS-FIBRE
EPOXY PREPREG COMPOSITES BY
VACUUM BAG
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2189
MANUFACTURE OF GLASS-FIBRE AND
ARAMID-FIBRE EPOXY PREPREG
COMPOSITES BY AUTOCLAVE
ABP6-2189
MANUFACTURE OF GLASS-FIBRE AND
ARAMID-FIBRE EPOXY PREPREG
COMPOSITES BY AUTOCLAVE
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2190
MANUFACTURE OF GLASS-FIBRE
PHENOLIC PREPREG COMPOSITES BY
AUTOCLAVE
ABP6-2190
MANUFACTURE OF GLASS-FIBRE
PHENOLIC PREPREG COMPOSITES BY
AUTOCLAVE
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2191
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2192
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2195
YES
3 - QUALIFIED
NONE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2196
NO
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
APPLICATION OF PINHOLE FILLER
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
PREPARATION OF METALLIC
MATERIALS FOR ADHESIVE BONDING
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
PREPARATION OF PTFE FOR
ADHESIVE BONDING
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING USING SEALANT
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
ADHESIVE BONDING WITH ONE PART
HEAT CURING EPOXY ( EC2214 )
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
ADHESIVE BONDING WITH TWO PART
ACRYLIC
ADHESIVE BONDING OF CURED FIBRE
REINFORCED COMPOSITES
ADHESIVE BONDING OF ACRYLIC (
TENSOL CEMENTS ETC. )
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES (
GENERAL )
MANUFACTURE OF GLASS-FIBRE
PHENOLIC PREPREG COMPOSITES BY
VACUUM BAG
MANUFACTURE OF GLASS-FIBRE
POLYESTER PREPREG COMPOSITES
MANUFACTURE OF GLASS-FIBRE
PHENOLIC RESIN COMPOSITES BY
WET LAY-UP
ABP4-3135
ABP4-3138
ABP4-3329
ABP4-3350
ABP4-5142
ABP4-5143
ABP4-5144
ABP4-5365
ABP5-1146
ABP5-1147
ABP5-1148
ABP5-1149
ABP5-1152
ABP5-1153
ABP5-1155
ABP5-1158
ABP5-1159
ABP5-1160
ABP5-1162
ABP5-1164
ABP5-1165
ABP6-2184
ABP6-2191
ABP6-2192
ABP6-2195
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
APPLICATION OF PINHOLE FILLER
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
PREPARATION OF METALLIC
MATERIALS FOR ADHESIVE BONDING
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
PREPARATION OF PTFE FOR
ADHESIVE BONDING
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING USING SEALANT
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
ADHESIVE BONDING WITH ONE PART
HEAT CURING EPOXY ( EC2214 )
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
ADHESIVE BONDING WITH TWO PART
ACRYLIC
ADHESIVE BONDING OF CURED FIBRE
REINFORCED COMPOSITES
ADHESIVE BONDING OF ACRYLIC (
TENSOL CEMENTS ETC. )
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES (
GENERAL )
MANUFACTURE OF GLASS-FIBRE
PHENOLIC PREPREG COMPOSITES BY
VACUUM BAG
MANUFACTURE OF GLASS-FIBRE
POLYESTER PREPREG COMPOSITES
MANUFACTURE OF GLASS-FIBRE
PHENOLIC RESIN COMPOSITES BY
WET LAY-UP
MANUFACTURE OF GLASS-FIBRE
MANUFACTURE OF GLASS-FIBRE
EPOXY PREPREG COMPOSITES BY
ABP6-2196
EPOXY PREPREG COMPOSITES BY
PRESS CURING
PRESS CURING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 51 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2326
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2348
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-2360
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-3205
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-4221
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-5232
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
ABP6-5233
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-002
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
135583
AIM COMPOSITES LIMITED
135583
Title (PS)
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES (
REDUX 308 )
MANUFACTURE OF CARBON, GLASS,
OR ARAMID-FIBRE EPOXY
COMPOSITES BY RESIN FILM
INFUSION
MANUFACTURE OF CARBON, GLASS,
OR ARAMID-FIBRE EPOXY
COMPOSITES BY LIQUID RESIN
INFUSION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
TESTING BY ULTRASONIC FLAW
DETECTION
TESTING COMPOSITES BY
ULTRASONIC FLAW DETECTION
Ref. No. (PI)
ABP6-2326
ABP6-2348
ABP6-2360
ABP6-3205
ABP6-4221
ABP6-5232
Couple qualification Status
Title (PI)
MANUFACTURE OF ALUMINIUM
SKINNED HONEYCOMB COMPOSITES (
REDUX 308 )
MANUFACTURE OF CARBON, GLASS,
OR ARAMID-FIBRE EPOXY
COMPOSITES BY RESIN FILM
INFUSION
MANUFACTURE OF CARBON, GLASS,
OR ARAMID-FIBRE EPOXY
COMPOSITES BY LIQUID RESIN
INFUSION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
TESTING BY ULTRASONIC FLAW
DETECTION
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
INSTALLATION OF TAPER SHANK
BOLTS
ABP2-2083
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2083 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CAMBRIDGE
United Kingdom
AIPS01-02-006
INSTALLATION OF LOCKBOLTS PULL
AND STUMP TYPES
ABP2-2079
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2079 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
ABP2-2337
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2337 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-014
INSTALLATION OF COLD EXPANDED
RETAINERS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2073
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2073 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2077
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2077 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2074
MANUAL FASTENING WITH POINT
DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2074 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2075
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2075 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-03-002
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
ABP2-2081
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2081 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
ABP2-3089
INSTALLING METALLIC INSERTS (
SHUR-LOK - HOT MELT )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3089 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
ABP2-3090
INSTALLING ALUMINIUM TWO-PART
INSERTS ( SHUR-LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3090 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
ABP2-3094
INSTALLING METALLIC INSERTS (
SHUR-TAB )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3094 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS01-03-005
INSTALLATION OF METALLIC INSERTS
(ACRES SLEEVES)
ABP2-3095
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3095 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
United Kingdom
MANUFACTURE OF STRUCTURAL
MANUFACTURE OF GLASS-FIBRE AND
SANDWICH PARTS WITH
AIPS03-02-018
ABP6-2189
ARAMID-FIBRE EPOXY PREPREG
THERMOSETTING FIBER REINFORCED
COMPOSITES BY AUTOCLAVE
SKINS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
9 - LIMITED SCOPE (AIPS00-00006)
135583
AIM COMPOSITES LIMITED
Airbus Qualified Special Process List (External Report)
CAMBRIDGE
ABP6-2189 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
2015-02-02 - Page 52 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
ABP6-2185
MANUFACTURE OF CARBON-FIBRE
EPOXY PREPREG COMPOSITES BY
AUTOCLAVE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2185 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
ABP6-2191
MANUFACTURE OF GLASS-FIBRE
PHENOLIC PREPREG COMPOSITES BY
VACUUM BAG
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2191 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
ABP6-2190
MANUFACTURE OF GLASS-FIBRE
PHENOLIC PREPREG COMPOSITES BY
AUTOCLAVE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2190 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
ABP6-2192
MANUFACTURE OF GLASS-FIBRE
POLYESTER PREPREG COMPOSITES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2192 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
ABP6-2189
MANUFACTURE OF GLASS-FIBRE AND
ARAMID-FIBRE EPOXY PREPREG
COMPOSITES BY AUTOCLAVE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2189 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
ABP6-2188
MANUFACTURE OF GLASS-FIBRE
EPOXY PREPREG COMPOSITES BY
VACUUM BAG
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2188 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
ABP6-2185
MANUFACTURE OF CARBON-FIBRE
EPOXY PREPREG COMPOSITES BY
AUTOCLAVE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2185 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
ABP6-2348
MANUFACTURE OF CARBON, GLASS,
OR ARAMID-FIBRE EPOXY
COMPOSITES BY RESIN FILM
INFUSION
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2348 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP6-2360
MANUFACTURE OF CARBON, GLASS,
OR ARAMID-FIBRE EPOXY
COMPOSITES BY LIQUID RESIN
INFUSION
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2360 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
ABP2-3093
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3093 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP6-2360
MANUFACTURE OF CARBON, GLASS,
OR ARAMID-FIBRE EPOXY
COMPOSITES BY LIQUID RESIN
INFUSION
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2360 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2125
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS03-07-021
PREPARATION OF DRY FIBER
PREFORMS FOR INFUSION &
INJECTION TECHNIQUES
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3135
APPLICATION OF FILLER TO SMALL
HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3135 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3350 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 53 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-3329
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3329 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5143
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5143 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-005
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
ABP6-4221
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-4221 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-007
APPLICATION OF SEALANT
IMPREGNATED FOAM
ABP4-5365
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5365 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-01-007
ETCHING OF FLUOROPOLYMER
ADHEREND PRIOR TO ADHESIVE
BONDING
ABP5-1148
PREPARATION OF PTFE FOR
ADHESIVE BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1148 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1158
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1158 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1159
ADHESIVE BONDING WITH ONE PART
HEAT CURING EPOXY ( EC2214 )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1159 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1160
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1160 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1162
ADHESIVE BONDING WITH TWO PART
ACRYLIC
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1162 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1153
ADHESIVE BONDING OF SILICONE
RUBBER WITH SILICONE ADHESIVE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1153 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1149
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1149 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1147
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1147 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1155
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1155 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1165
ADHESIVE BONDING OF ACRYLIC (
TENSOL CEMENTS ETC. )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1165 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1164
ADHESIVE BONDING OF CURED FIBRE
REINFORCED COMPOSITES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1164 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135583
AIM COMPOSITES LIMITED
CAMBRIDGE
United Kingdom
AIPS06-02-007
BONDING METAL / METAL PARTS
STRUCTURAL BONDING PROCESS
ABP5-1146
PREPARATION OF METALLIC
MATERIALS FOR ADHESIVE BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1146 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 54 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
80-T-35-2000
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
80-T-35-5030
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
80-T-35-5030
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
80-T-35-5130
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
80-T-35-5130
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ABP4-4140
STRIPPING OF PAINTS BY CHEMICAL
METHODS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ABP6-5230
TESTING BY PENETRANT FLAW
DETECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-05-IP2-033-A0)
YES
3 - QUALIFIED
BF5
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ADET0072
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-05-IP2-033-A0)
TBD
3 - QUALIFIED
BF5
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ADET0079
CHROMATING TREATMENT FOR
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-05-IP2-033-A0)
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
ADET0091
SULFURIC - ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-23-STQ-05-IP2-033-A0)
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(GAMME 1-01)
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
AIPI02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NO LIMITATION FOR IMMERSION
PROCESS; FOR TOUCH UP ATP ONLY
FOR 2XXX ALUMINIUM ALLOYS FOR
NON PAINTED APPLICATION
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-05-IP2-033-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0079 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-009
APPLICATION OF STRUCTURAL
PAINTS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 55 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-05-IP2-033-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
BF5ADET0071 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
AITM6-6006
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 13/04/2015
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
IGC04-25-100
METALLIC ELEMENTS LIQUID
PENETRANT INSPECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
IGC04-25-101
FLUORESCENT DYE PENETRANT
INSPECTION ALLOWED MATERIALS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
198833
AIMT SGI SAS SOC DE
GALVANOPLASTIE
INDUSTRIELLE
PLAISIR CEDEX
France
IGC04-25-102
VISUAL INSPECTIONS UNDER
ULTAVIOLET RADIATION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
137972
AIP SINTEX NP GROUP
CHASSIEU
France
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
ONLY PILOT HOLES WITH TOLERANCE
ON LOCALIZATION SUPERIOR TO
0,4MM. NUMERICAL MACHINE DMG,
SERIAL NUMBER: 15475579994.
137972
AIP SINTEX NP GROUP
CHASSIEU
France
AIPS03-02-010
NO
3 - QUALIFIED
NONE
137972
AIP SINTEX NP GROUP
CHASSIEU
France
AIPS03-07-002
YES
3 - QUALIFIED
137972
AIP SINTEX NP GROUP
CHASSIEU
France
AITM6-3004
VISUAL INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
ADET0049
ALUMINIUM ALLOYS CHEMICAL
MILLING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF58-01-STQ-02-IP2-241-A0)
NO
3 - QUALIFIED
MATERIEL 7000 FAMILLY - BATH TYPE
II (B)
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-02-IP2-241-A0)
YES
3 - QUALIFIED
TYPE ANODIQUE 1B
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
ADET0079
CHROMATING TREATMENT FOR
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-02-IP2-241-A0)
YES
3 - QUALIFIED
NONE
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-02-IP2-241-A0)
YES
3 - QUALIFIED
NONE
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STQ-02-IP2-241-A0)
YES
3 - QUALIFIED
NONE
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
NO_AIRBUS_PI
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0173 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
AIPS02-01-004
ANODIZING OF TITANIUM AND ITS
ALLOYS
I+D-P-048
YES
3 - QUALIFIED
NONE
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
AIPS02-04-004
HARD CHROMIUM PLATING OF STEELS
NO_AIRBUS_PI
YES
3 - QUALIFIED
ALLIAGES D'ALUMINIUM
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0079 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
SEVILLA
Spain
AIPS03-01-001
ROLLER SWAGING FOR NON
HYDRAULIC FITTING /COUPLING
I+D-P-319
NO
3 - QUALIFIED
NONE
SEVILLA
Spain
AIPS03-03-013
EXTERNAL SWAGED PIPE SOCKETS
I+D-P-312
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
AIPS03-06-003
LOCKING USING WIRE
I+D-P-373
NO
3 - QUALIFIED
NONE
SEVILLA
Spain
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
I+D-P-065
NO
3 - QUALIFIED
NONE
SEVILLA
Spain
AIPS03-06-007
EXTERNAL SWAGED TUBE FITTINGS
I+D-P-312
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
AIPS03-06-014
LOCKING BY SPLIT PIN
I+D-P-376
NO
3 - QUALIFIED
NONE
146563
146563
146563
146563
146563
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
Airbus Qualified Special Process List (External Report)
THE MANUFACTURE OF
THERMOPLASTIC MATERIAL PARTS BY
THE INJECTION MOLDING PROCESS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
AIPI03-02-010
AIPI03-07-002
THE MANUFACTURE OF
THERMOPLASTIC MATERIAL PARTS BY
THE INJECTION MOLDING PROCESS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-02-IP2-241-A0)
ANODIZING OF TITANIUM AND ITS
ALLOYS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-ST01-STQ-02-IP2-241-A0)
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-02-IP2-241-A0)
SWAGING OF FLUID SYSTEMS (
GAMAH, AVICA AND WIGGINGS )
PERMASWAGE SWAGING ON TUBES
INTENDED FOR FLUID SYSTEM
WIRE LOCKING OF PARTS
FIXING OF MECHANICAL ELEMENTS
WITH ANAEROBIAN RESINS (LOCTITE
TYPE)
PERMASWAGE SWAGING ON TUBES
INTENDED FOR FLUID SYSTEM
LOCKING OF PARTS WITH COTTER
PINS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
MACHINE USED: DMG, SERIAL
NUMBER: 15475579994
MANUFACTURE OF THERMOPLASTIC
MATERIAL AND DRILLING HOLES IN
FIBRE REINFORCED PLASTIC (FRP)
2015-02-02 - Page 56 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF61-01-STQ-02-IP2-241-A0)
YES
3 - QUALIFIED
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-02-IP2-241-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
SEVILLA
Spain
AIPS07-01-006
ELECTRICAL BONDING
I+D-P-355
BONDING AND GROUNDING
INSTALLATION
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
IGC04-25-100
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
SEVILLA
Spain
IGC04-25-101
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
SEVILLA
Spain
IGC04-25-102
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
SEVILLA
Spain
IGC04-25-105
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
SEVILLA
Spain
IGC04-63-100
NA
NOT APPLICABLE
NO
3 - QUALIFIED
FOUR: HT29-HT35-HT36
NA
NOT APPLICABLE
NO
3 - QUALIFIED
FOUR: HT29-HT35-HT36
80-T-30-0032
MACHINING OF FRP COMPONENTS
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
SCREW LOCKING
NO
3 - QUALIFIED
NONE
WIRE LOCKING
NO
3 - QUALIFIED
NONE
2015-02-02 - Page 57 of 876
146563
146563
146563
146563
146563
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
146563
AIRBUS DEFENCE AND SPACE
SA FACTORIA DE TABLADA MT
SEVILLA
Spain
IGC04-63-111
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-30-0032
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-30-3001
DONAUWOERTH
Germany
80-T-30-4010
DONAUWOERTH
Germany
80-T-30-6912
DONAUWOERTH
Germany
80-T-30-6913
DONAUWOERTH
Germany
80-T-30-6918
157485
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-30-9910
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-31-2909
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-31-2910
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-31-2915
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-31-2916
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
157485
DONAUWOERTH
Germany
80-T-31-2918
DONAUWOERTH
Germany
80-T-31-2950
DONAUWOERTH
Germany
80-T-32-1000
DONAUWOERTH
Germany
80-T-33-3010
DONAUWOERTH
Germany
80-T-33-3510
DONAUWOERTH
Germany
80-T-34-0185
DONAUWOERTH
Germany
80-T-34-3000
DONAUWOERTH
Germany
80-T-34-3001
DONAUWOERTH
Germany
80-T-34-3002
DONAUWOERTH
Germany
80-T-34-3003
DONAUWOERTH
Germany
80-T-34-3006
DONAUWOERTH
Germany
80-T-34-3010
DONAUWOERTH
Germany
80-T-34-3011
METALLIC ELEMENTS LIQUID
PENETRANT INSPECTION
FLUORESCENT DYE PENETRANT
INSPECTION ALLOWED MATERIALS
VISUAL INSPECTIONS UNDER
ULTAVIOLET RADIATION
METALLIC ELEMENTS - MAGNETIC
PARTICLE INSPECTION
QUALIFICATION OF HEAT TREATMENT
AND CURING INSTALLATIONS
HEAT TREATEMENT OF ALUMINIUM
ALLOYS - INSPECTION OF
OPERATIONS AND OF PARTS
MACHINING OF FRP COMPONENTS
BEARBEITUNG VON
SINTERWERKSTOFFEN FÜR LAGER
UND BUCHSEN
MACHINING OF METALLIC
COMPONENTS
GRINDING OF STEEL
PRECISION GRINDING OF HARD
CHROMIUM LAYERS ON STEEL
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
MANUFACTURE OF SANDWICH
COMPONENTS
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
MANUFACTURE OF MONOLITHIC
COMPONENTS BY IMPREGNATION OF
DRY FIBERS ( RTM PROCESS )
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
MANUFACTURE OF MONOLITHIC
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS BY MEANS OF THE
RESIN INFUSION (RI) PROCESS
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
CHEMICAL MILLING OF ALUMINUM AND
ALUMINUM ALLOYS
EINBAU VON ACRES UEBERMASSHUELSEN
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF ROSAN THREADED
INSERTS
INSTALLATION OF HELICAL THREADED
INSERTS
IDENTIFICATION OF TORQUETIGHTENED SCREWED CONNECTIONS
SCREW LOCKING
80-T-30-3001
80-T-30-4010
BEARBEITUNG VON
SINTERWERKSTOFFEN FÜR LAGER
UND BUCHSEN
MACHINING OF METALLIC
COMPONENTS
80-T-30-6912
80-T-30-6913
80-T-30-6918
80-T-30-9910
80-T-31-2909
80-T-31-2910
80-T-31-2915
80-T-31-2916
80-T-31-2918
80-T-31-2950
80-T-32-1000
80-T-33-3010
80-T-33-3510
80-T-34-0185
GRINDING OF STEEL
PRECISION GRINDING OF HARD
CHROMIUM LAYERS ON STEEL
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
MANUFACTURE OF SANDWICH
COMPONENTS
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
MANUFACTURE OF MONOLITHIC
COMPONENTS BY IMPREGNATION OF
DRY FIBERS ( RTM PROCESS )
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
MANUFACTURE OF MONOLITHIC
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS BY MEANS OF THE
RESIN INFUSION (RI) PROCESS
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
CHEMICAL MILLING OF ALUMINUM AND
ALUMINUM ALLOYS
EINBAU VON ACRES UEBERMASSHUELSEN
80-T-34-3000
80-T-34-3001
80-T-34-3002
80-T-34-3003
80-T-34-3006
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF ROSAN THREADED
INSERTS
INSTALLATION OF HELICAL THREADED
INSERTS
IDENTIFICATION OF TORQUETIGHTENED SCREWED CONNECTIONS
80-T-34-3010
WIRE LOCKING
80-T-34-3011
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
FOUR: HT29-HT35-HT36
TYPE ANODIQUE 1BADET0071 SCOPE
& LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
External Shop
ARP-ID
157485
157485
157485
157485
157485
157485
157485
Company Name
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
DONAUWOERTH
Germany
80-T-34-3012
SECURING SCREWED CONNECTIONS
WITH ADHESIVE
80-T-34-3012
SECURING SCREWED CONNECTIONS
WITH ADHESIVE
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-3013
SECURING WITH LOCKWASHERS
80-T-34-3013
SECURING WITH LOCKWASHERS
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-3014
SAFETYING WITH SPLIT PINS
80-T-34-3014
SAFETYING WITH SPLIT PINS
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-3016
SELF - LOCKING NUTS
80-T-34-3016
SELF - LOCKING NUTS
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-3030
INSTALLATION OF INSERT NUTS IN
SANDWICH COMPONENTS
80-T-34-3030
INSTALLATION OF INSERT NUTS IN
SANDWICH COMPONENTS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-3200
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF SPHERICAL PLAIN
AND ROLLING BEARINGS WITH
RETAINER BUSHES
80-T-34-3200
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF SPHERICAL PLAIN
AND ROLLING BEARINGS WITH
RETAINER BUSHES
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-34-3202
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-34-3700
DONAUWOERTH
Germany
80-T-34-5661
DONAUWOERTH
Germany
80-T-34-5801
CLOSE RIVETING ( EDGE SEALING )
80-T-34-5801
CLOSE RIVETING ( EDGE SEALING )
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5802
CLOSE RIVETING ( AREA SEALING )
80-T-34-5802
CLOSE RIVETING ( AREA SEALING )
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5804
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5805
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5811
INSTALLATION OF BLIND RIVETS
80-T-34-5811
INSTALLATION OF BLIND RIVETS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5815
INSTALLATION OF HI-LOKS
80-T-34-5815
INSTALLATION OF HI-LOKS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5818
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5822
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-5825
INSTALLATION OF BLIND RIVET NUTS
80-T-34-5825
INSTALLATION OF BLIND RIVET NUTS
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-6100
RESISTANCE WELDING ( SPOT AND
SEAM WELD )
80-T-34-6100
RESISTANCE WELDING ( SPOT AND
SEAM WELD )
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-9000
BONDING OF STRUCTURES
80-T-34-9000
BONDING OF STRUCTURES
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-9008
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-9020
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-9032
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-9033
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-34-9600
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0001
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0014
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0019
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0020
ALKALINE CLEANING
80-T-35-0020
ALKALINE CLEANING
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0021
ALKALINE CLEANING OF STEEL
STAINLESS STEEL MG AND NICKEL
ALLOYS
80-T-35-0021
ALKALINE CLEANING OF STEEL
STAINLESS STEEL MG AND NICKEL
ALLOYS
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0023
ULTRASONIC CLEANING
80-T-35-0023
ULTRASONIC CLEANING
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0024
SPRAY CLEANING
80-T-35-0024
SPRAY CLEANING
NO
3 - QUALIFIED
NONE
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
INSTALLATION OF RIVETS WITH AN
AUTOMATIC RIVETER
INSTALLATION OF AVDEL MBC BLIND
RIVETS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
STRUCTURAL BONDING UNDER
REDUCED PRESSURE
INSTALLATION OF BEARINGS /
BUSHES BY BONDING
BONDING OF NON-STRUCTURAL
CONNECTIONS
BONDING WITH ADHESIVES ON
SILICONE BASIS
APPLICATION OF SEALING
COMPOUNDS
VAPOR DEGREASING
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH EMULSION CLEANING
AGENTS
80-T-34-3202
80-T-34-3700
80-T-34-5661
80-T-34-5804
80-T-34-5805
80-T-34-5818
80-T-34-5822
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
INSTALLATION OF RIVETS WITH AN
AUTOMATIC RIVETER
INSTALLATION OF AVDEL MBC BLIND
RIVETS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
STRUCTURAL BONDING UNDER
REDUCED PRESSURE
INSTALLATION OF BEARINGS /
BUSHES BY BONDING
BONDING OF NON-STRUCTURAL
CONNECTIONS
BONDING WITH ADHESIVES ON
SILICONE BASIS
APPLICATION OF SEALING
COMPOUNDS
80-T-34-9008
80-T-34-9020
80-T-34-9032
80-T-34-9033
80-T-34-9600
80-T-35-0001
80-T-35-0014
80-T-35-0019
VAPOR DEGREASING
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH EMULSION CLEANING
AGENTS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 58 of 876
External Shop
ARP-ID
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
Company Name
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
157485
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
DONAUWOERTH
Germany
80-T-35-0030
ELECTROLYTIC DEGREASING
80-T-35-0030
ELECTROLYTIC DEGREASING
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0090
RINSING
80-T-35-0090
RINSING
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0100
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0103
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0104
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0106
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0108
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0110
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0113
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0114
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0130
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0131
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0132
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0194
PICKLING OF MARTENSITIC STEELS
80-T-35-0194
PICKLING OF MARTENSITIC STEELS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0204
ABRASIVE BLASTING - VAPOUR
LAPPING -
80-T-35-0204
ABRASIVE BLASTING - VAPOUR
LAPPING -
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-0205
SHOT PEENING
80-T-35-0205
SHOT PEENING
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-1000
PHOSPHATING
80-T-35-1000
PHOSPHATING
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-1107
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-1200
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-1201
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-2002
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-2100
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-2101
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-2102
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-2103
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-2200
HARD ANODIZINGH
80-T-35-2200
HARD ANODIZINGH
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-3000
CADMIUM¿PLATING OF STEEL
80-T-35-3000
CADMIUM¿PLATING OF STEEL
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-3003
CADMIUM - PLATING OF COPPER
ALLOYS
80-T-35-3003
CADMIUM - PLATING OF COPPER
ALLOYS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-3200
HARD CHROMIUM PLATING
80-T-35-3200
HARD CHROMIUM PLATING
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-3301
ELECTROLYTIC COPPER - PLATING OF
STEELS AND NON - FERROUS HEAVY
METALS
80-T-35-3301
ELECTROLYTIC COPPER - PLATING OF
STEELS AND NON - FERROUS HEAVY
METALS
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-3302
ELECTROLYTIC NICKEL - PLATING
80-T-35-3302
ELECTROLYTIC NICKEL - PLATING
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-4100
FLAME SPRAYING
80-T-35-4100
FLAME SPRAYING
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-4300
CHEMICAL NICKEL - PLATING OF
STEEL
80-T-35-4300
CHEMICAL NICKEL - PLATING OF
STEEL
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-5000
COATING WITH WASH PRIMER
80-T-35-5000
COATING WITH WASH PRIMER
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-5008
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 59 of 876
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
PICKLING OF CRABON AND LOW ALLOY STEELS
PICKLING OF STAINLESS, AUSTENITIC
STEEL
PICKLING OF TITANIUM AND TITANIUM
ALLOYS - ACID PICKLING OF AL FOR BONDING
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
DESCALING OF TITANIUM AND
TITANIUM ALLOYS IN SALT BATHS
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
PRETREATMENT OF POLYAMIDE FOR
BONDING
PRETREATMENT OF
FLUOROPLASTICS FOR BONDING
CHROMIUM PASSIVATION OF
CADMIUM - PLATED SURFACES
PASSIVATION OF CORROSION RESISTANT AUSTENITIC STEEL
PASSIVATION OF MARTENSITIC
FERRITIC CORROSION - RESISTANT
STEEL
DC SULPHURIC ACID COLOR
ANODIZING WITH SEALING
CHROMIC ACID ANODIZING
HOT WATER SEALING OF CHROMIC ACID ANODIC COATINGS
DIRECT - CURRENT CHROMIC ACID
PROCESS AS PRETREATMENT FOR
BONDED JOINTS
DICHROMATE SEALING OF CHROMIC
ACID ANODIZED LAYERS
80-T-35-0100
80-T-35-0103
80-T-35-0104
80-T-35-0106
80-T-35-0108
80-T-35-0110
80-T-35-0113
80-T-35-0114
80-T-35-0130
80-T-35-0131
80-T-35-0132
80-T-35-1107
80-T-35-1200
80-T-35-1201
80-T-35-2002
80-T-35-2100
80-T-35-2101
80-T-35-2102
80-T-35-2103
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
PICKLING OF CRABON AND LOW ALLOY STEELS
PICKLING OF STAINLESS, AUSTENITIC
STEEL
PICKLING OF TITANIUM AND TITANIUM
ALLOYS - ACID PICKLING OF AL FOR BONDING
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
DESCALING OF TITANIUM AND
TITANIUM ALLOYS IN SALT BATHS
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
PRETREATMENT OF POLYAMIDE FOR
BONDING
PRETREATMENT OF
FLUOROPLASTICS FOR BONDING
CHROMIUM PASSIVATION OF
CADMIUM - PLATED SURFACES
PASSIVATION OF CORROSION RESISTANT AUSTENITIC STEEL
PASSIVATION OF MARTENSITIC
FERRITIC CORROSION - RESISTANT
STEEL
DC SULPHURIC ACID COLOR
ANODIZING WITH SEALING
CHROMIC ACID ANODIZING
HOT WATER SEALING OF CHROMIC ACID ANODIC COATINGS
DIRECT - CURRENT CHROMIC ACID
PROCESS AS PRETREATMENT FOR
BONDED JOINTS
DICHROMATE SEALING OF CHROMIC
ACID ANODIZED LAYERS
COATING WITH TWO - COMPONENT
COATING WITH TWO - COMPONENT
80-T-35-5008
POLYURETHANE PRIMER
POLYURETHANE PRIMER
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-35-5012
DONAUWOERTH
Germany
80-T-35-5022
DONAUWOERTH
Germany
80-T-35-5023
DONAUWOERTH
Germany
80-T-35-5024
DONAUWOERTH
Germany
80-T-35-5025
DONAUWOERTH
Germany
80-T-35-5106
DONAUWOERTH
Germany
80-T-35-5202
DONAUWOERTH
Germany
80-T-35-5212
DONAUWOERTH
Germany
80-T-35-5218
DONAUWOERTH
Germany
80-T-35-5250
DONAUWOERTH
Germany
80-T-35-5254
DONAUWOERTH
Germany
80-T-35-5256
DONAUWOERTH
Germany
80-T-35-5400
DONAUWOERTH
Germany
80-T-35-5400
DONAUWOERTH
Germany
80-T-35-5403
DONAUWOERTH
Germany
80-T-35-5702
DONAUWOERTH
Germany
80-T-35-5801
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Title (PS)
PROTECTIONS OF PARTS IN STORAGE
AND INTERMEDIATE STORAGE
DURING PRODUCTION
COATING WITH TWO - COMPONENT
PRIMER ( EP - BASED )
COATING WITH TWO¿COMPONENT
EP¿BASED PRIMER,CHROMATE¿FREE
COATING WITH TWO-COMPONENT
PRIMER, EP-BASED, CHROMATE FREE
COATING WITH TWO - COMPONENT
PRIMER CHROMATE - FREE
COATING WITH PUR - BASED TOP
COAT
COATING WITH HIGHLY ELASTIC
PAINTS
COATING WITH ANTI - SLIP PAINT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
APPLICATION OF PEELABLE
PROTECTIVE COATINGS
COATING WITH PUR-BASED VARNISH
ABRASION-RESISTANT
COATING WITH CONDUCTIVE PAINT
APPLICATION OF FINE POWDER
LAYERS
APPLICATION OF FINE POWDER
LAYERS
APPLICATION OF PVF FOIL
PRESERVATION FOR INTERMEDIATE
STORAGE
TREATMENT WITH SYNTHETIC
LUBRICANTS
TREATMENT WITH OVEN - DRYING
MOLYBDENUM DISULPHIDE ( MOS2 )
LUBRICANT
Ref. No. (PI)
80-T-35-5012
80-T-35-5022
80-T-35-5023
80-T-35-5024
80-T-35-5025
80-T-35-5106
80-T-35-5202
Couple qualification Status
Title (PI)
PROTECTIONS OF PARTS IN STORAGE
AND INTERMEDIATE STORAGE
DURING PRODUCTION
COATING WITH TWO - COMPONENT
PRIMER ( EP - BASED )
COATING WITH TWO¿COMPONENT
EP¿BASED PRIMER,CHROMATE¿FREE
COATING WITH TWO-COMPONENT
PRIMER, EP-BASED, CHROMATE FREE
COATING WITH TWO - COMPONENT
PRIMER CHROMATE - FREE
COATING WITH PUR - BASED TOP
COAT
COATING WITH HIGHLY ELASTIC
PAINTS
80-T-35-5212
COATING WITH ANTI - SLIP PAINT
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
APPLICATION OF PEELABLE
PROTECTIVE COATINGS
COATING WITH PUR-BASED VARNISH
ABRASION-RESISTANT
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
80-T-35-5400
APPLICATION OF FINE POWDER
LAYERS
NO
3 - qualified
none
80-T-35-5403
APPLICATION OF PVF FOIL
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
80-T-35-5218
80-T-35-5250
80-T-35-5254
80-T-35-5702
80-T-35-5801
PRESERVATION FOR INTERMEDIATE
STORAGE
TREATMENT WITH SYNTHETIC
LUBRICANTS
TREATMENT WITH OVEN - DRYING
MOLYBDENUM DISULPHIDE ( MOS2 )
LUBRICANT
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-35-5900
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-35-5903
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
80-T-35-5903
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-35-5905
WET ASSEMBLY OF COMPONENTS
WITH CORROSION PREVENTIVES ON A
CHROMATE BASIS
80-T-35-5905
WET ASSEMBLY OF COMPONENTS
WITH CORROSION PREVENTIVES ON A
CHROMATE BASIS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9021
PRESERVATION OF CUT EDGES
80-T-35-9021
PRESERVATION OF CUT EDGES
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9023
PRESERVATION OF RIVET ROWS
80-T-35-9023
PRESERVATION OF RIVET ROWS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9030
APPLICATION OF FILLERS
80-T-35-9030
APPLICATION OF FILLERS
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 01/05/2015
NONE
DONAUWOERTH
Germany
80-T-35-9121
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9122
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9123
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9124
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9125
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9127
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-35-9799
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-36-3050
GASNITRIEREN
80-T-36-3050
GASNITRIEREN
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-36-3201
BATH NITRIDING ( TENIFER
TREATMENT )
80-T-36-3201
BATH NITRIDING ( TENIFER
TREATMENT )
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-36-3300
DEHYDROGENATION OF STEELS
80-T-36-3300
DEHYDROGENATION OF STEELS
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-39-0131
PRODCTION AND MARKING OF
IDENTIFICATION PLATES
NO
3 - QUALIFIED
NONE
2015-02-02 - Page 60 of 876
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
157485
PROCESSING OF WASH PRIMER,
PRIMER AND TOP COAT
VERARBEITEN VON
ANSTRICHSTOFFEN FUER
BESONDERE ZWECKE
PAINT COATING IN INTERIOR
FURNISHING
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
REMOVAL OF ORGANIC COATINGS
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
APPLICATION OF WATER-REPELLENT,
WATER-DISPLACING AND CORROSIONINHIBITING PREVENTIVES
80-T-35-5900
PROCESSING OF WASH PRIMER,
PRIMER AND TOP COAT
VERARBEITEN VON
ANSTRICHSTOFFEN FUER
BESONDERE ZWECKE
PAINT COATING IN INTERIOR
FURNISHING
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-9121
80-T-35-9122
80-T-35-9123
80-T-35-9124
80-T-35-9125
80-T-35-9127
80-T-35-9799
REMOVAL OF ORGANIC COATINGS
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
APPLICATION OF WATER-REPELLENT,
WATER-DISPLACING AND CORROSIONINHIBITING PREVENTIVES
PRODCTION AND MARKING OF
80-T-39-0131
IDENTIFICATION PLATES
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
ARP-ID
157485
157485
157485
Company Name
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
DONAUWOERTH
Germany
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-39-0133
IDENTIFICATION BY EMBOSSING
80-T-39-0133
IDENTIFICATION BY EMBOSSING
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-39-0134
MAKING BY VIBRO - ENGRAVING
80-T-39-0134
MAKING BY VIBRO - ENGRAVING
NO
3 - QUALIFIED
NONE
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-39-0230
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
80-T-39-0331
DONAUWOERTH
Germany
80-T-39-0501
DONAUWOERTH
Germany
80-T-39-1028
DONAUWOERTH
Germany
80-T-40-0101
DONAUWOERTH
Germany
80-T-40-3050
DONAUWOERTH
Germany
80-T-40-3200
DONAUWOERTH
Germany
80-T-40-3201
DONAUWOERTH
Germany
80-T-40-3202
DONAUWOERTH
Germany
80-T-40-3210
DONAUWOERTH
Germany
80-T-40-3214
TWISTING OF ELECTRICAL CABLES
80-T-40-3214
TWISTING OF ELECTRICAL CABLES
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3215
PROTECTION OF ELECTRICAL
CONNECTORS
80-T-40-3215
PROTECTION OF ELECTRICAL
CONNECTORS
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3217
CRIMPEN VON KABELSCHUHEN
80-T-40-3217
CRIMPEN VON KABELSCHUHEN
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3218
STRIPPING OF ELECTRICAL CABLES
80-T-40-3218
STRIPPING OF ELECTRICAL CABLES
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3312
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3701
TYING OF CABLE HARNESSES
80-T-40-3701
TYING OF CABLE HARNESSES
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3702
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3711
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-3714
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-4001
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-5001
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
80-T-40-8100
TBD
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
NONE
INSTALLATION OF SOLID ALUMINUM
RIVETS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5814 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-9910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
none
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
PRODUCTION, INSTALLATION AND
REWORK OF/ON INSULATION
BLANKETS
PREVENTION OF CORROSION DURING
PRODUCTION
SILK SCREEN PRINTING OF TEXTS
AND PICTURES
INSTALLATION OF CABLE HARNESSES
IN AIRCRAFT
TORQUES FOR THE FINAL
INSTALLATION OF ELECTRICAL
COMPONENTS
ELECTRICAL CONNECTORS
LOCKING OF CONNECTORS WITH
ADHESIVE
WIRE LOCKING OF ELECTRICAL
CONNECTORS AND SWITCHES
INSTALLATION OF PRESSURE-TIGHT
GROMMETS
INSTALLATION OF CABLE GUIDES AND
SUPPORTS
MARKING OF ELECTRICAL EQUIPMENT
COMPONENTS
MARKING OF ELECTRICAL CABLES
WITH UV LASER
CRIMPING OF CIRCULAR CONTACTS
TO COPPER WIRES
CRIMPING OF CIRCULAR CONTACTS
TO ALUMINUM CABLES
SOLDERING OF ELECTRICAL
CONNECTIONS BY HAND
80-T-39-0331
80-T-39-0501
80-T-39-1028
80-T-40-0101
80-T-40-3050
PRODUCTION, INSTALLATION AND
REWORK OF/ON INSULATION
BLANKETS
PREVENTION OF CORROSION DURING
PRODUCTION
SILK SCREEN PRINTING OF TEXTS
AND PICTURES
INSTALLATION OF CABLE HARNESSES
IN AIRCRAFT
TORQUES FOR THE FINAL
INSTALLATION OF ELECTRICAL
COMPONENTS
80-T-40-3200
80-T-40-3201
80-T-40-3202
80-T-40-3210
80-T-40-3702
80-T-40-3711
80-T-40-3714
80-T-40-4001
80-T-40-5001
80-T-40-8100
ELECTRICAL CONNECTORS
LOCKING OF CONNECTORS WITH
ADHESIVE
WIRE LOCKING OF ELECTRICAL
CONNECTORS AND SWITCHES
INSTALLATION OF PRESSURE-TIGHT
GROMMETS
INSTALLATION OF CABLE GUIDES AND
SUPPORTS
MARKING OF ELECTRICAL EQUIPMENT
COMPONENTS
MARKING OF ELECTRICAL CABLES
WITH UV LASER
CRIMPING OF CIRCULAR CONTACTS
TO COPPER WIRES
CRIMPING OF CIRCULAR CONTACTS
TO ALUMINUM CABLES
SOLDERING OF ELECTRICAL
CONNECTIONS BY HAND
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
80-T-34-5814
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
AIPI01-02-003
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
80-T-30-9910
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
80-T-30-0032
MACHINING OF FRP COMPONENTS
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
DONAUWOERTH
Germany
DONAUWOERTH
Germany
AIPS01-02-005
DONAUWOERTH
Germany
AIPS01-02-006
DONAUWOERTH
Germany
AIPS01-02-008
INSTALLATION OF LOCKBOLTS PULL
AND STUMP TYPES
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
AIPI01-02-006
AIPI01-02-008
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
INSTALLATION OF LOCKBOLTS PULL
TYPE
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 61 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
AIPI01-02-013
INSTALLATION OF BLIND BOLTS PULLTYPE
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
80-T-34-5822
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5822 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
80-T-34-5811
INSTALLATION OF BLIND RIVETS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5811 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
AIPI01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3001 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5814 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
AIPI01-02-019
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
80-T-34-3700
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3700 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
80-T-34-3200
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3200 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-022
INSTALLING THREADED CYLINDRICAL
FASTENERS
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
80-T-34-5815
INSTALLATION OF HI-LOKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5815 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-02-027
INSTALLATION OF BLIND RIVET NUTS
AIPI01-02-027
INSTALLATION OF BLIND RIVET NUTS KOMMT NOCH MAL NACH FREIGABE
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
80-T-34-3030
INSTALLATION OF INSERT NUTS IN
SANDWICH COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3030 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-03-004
INSTALLATION OF HELICOIL
THREADED INSERTS
AIPI01-03-004
INSTALLATION OF HELICAL THREADED
INSERTS
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-03-004
INSTALLATION OF HELICOIL
THREADED INSERTS
80-T-34-3003
INSTALLATION OF HELICAL THREADED
INSERTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3003 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-04-001
GENERAL REQUIREMENTS FOR
WELDING AND ALLIED PROCESSES
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-6620 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-04-004
RESISTANCE WELDING
80-T-34-6100
RESISTANCE WELDING ( SPOT AND
SEAM WELD )
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-6100 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS01-04-008
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-6620 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
AIPI02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
80-T-35-2002
DC SULPHURIC ACID COLOR
ANODIZING WITH SEALING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-2002 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
80-T-35-0090
RINSING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0090 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
80-T-35-0114
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0114 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
80-T-35-0100
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0100 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
80-T-35-0110
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0110 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
80-T-35-0020
ALKALINE CLEANING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0020 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-004
ANODIZING OF TITANIUM AND ITS
ALLOYS
AIPI02-01-004
ANODIZING OF TITANIUM AND ITS
ALLOYS
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 62 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-005
HARD ANODIZING OF ALUMINIUM
ALLOYS
80-T-35-2200
HARD ANODIZINGH
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-2200 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-005
HARD ANODIZING OF ALUMINIUM
ALLOYS
80-T-35-0090
RINSING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0090 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-005
HARD ANODIZING OF ALUMINIUM
ALLOYS
80-T-35-0110
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0110 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-005
HARD ANODIZING OF ALUMINIUM
ALLOYS
80-T-35-0100
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0100 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-01-005
HARD ANODIZING OF ALUMINIUM
ALLOYS
80-T-35-0020
ALKALINE CLEANING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0020 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-02-002
DRY BLASTING
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0200 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-02-003
WET BLASTING
80-T-35-0204
ABRASIVE BLASTING - VAPOUR
LAPPING -
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0204 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
80-T-35-0205
SHOT PEENING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
AIPI02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-03-002
COPPER ALLOY COATING OF
TITANIUM AND STAINLESS STEEL
ALLOYS BY THERMAL SPRAYING
80-T-35-4100
FLAME SPRAYING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-4100 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-03-004
DEPOSITION OF ALUMINIUM BY THE
THERMAL SPRAY PROCESS
80-T-35-4100
FLAME SPRAYING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-4100 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
AIPI02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
80-T-35-9799
APPLICATION OF WATER-REPELLENT,
WATER-DISPLACING AND CORROSIONINHIBITING PREVENTIVES
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9799 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
80-T-35-3000
CADMIUM¿PLATING OF STEEL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-3000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
80-T-35-3003
CADMIUM - PLATING OF COPPER
ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-3003 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
80-T-36-3300
DEHYDROGENATION OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-3300 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
80-T-35-1107
CHROMIUM PASSIVATION OF
CADMIUM - PLATED SURFACES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-1107 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-004
HARD CHROMIUM PLATING OF STEELS
80-T-35-3200
HARD CHROMIUM PLATING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-3200 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-004
HARD CHROMIUM PLATING OF STEELS
80-T-36-3300
DEHYDROGENATION OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-3300 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-008
ELECTROLESS (CHEMICAL) NICKEL PHOSPHORUS PLATING
AIPI02-04-008
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-04-009
APPLICATION OF CORROSION
INHIBITING SOLID FILM LUBRICANT
80-T-35-5900
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5900 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-001
CHEMICAL CONVERSION COATING
80-T-35-0114
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0114 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-001
CHEMICAL CONVERSION COATING
80-T-35-0090
RINSING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0090 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-001
CHEMICAL CONVERSION COATING
80-T-35-0110
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0110 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-001
CHEMICAL CONVERSION COATING
80-T-35-0100
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0100 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
ELECTROLESS (CHEMICAL) NICKEL PHOSPHORUS PLATING
TREATMENT WITH OVEN - DRYING
MOLYBDENUM DISULPHIDE ( MOS2 )
LUBRICANT
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 63 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-001
CHEMICAL CONVERSION COATING
80-T-35-0020
ALKALINE CLEANING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0020 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-003
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
80-T-35-1200
PASSIVATION OF CORROSION RESISTANT AUSTENITIC STEEL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-1200 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-003
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
80-T-35-1201
PASSIVATION OF MARTENSITIC
FERRITIC CORROSION - RESISTANT
STEEL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-1201 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-003
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
80-T-36-3300
DEHYDROGENATION OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-3300 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-004
PHOSPHATING OF STEEL
80-T-36-3300
DEHYDROGENATION OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-3300 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-004
PHOSPHATING OF STEEL
80-T-35-1000
PHOSPHATING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-1000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
AIPI02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
YES
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-31-2909
MANUFACTURE OF SANDWICH
COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2909 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-02-020
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
AIPI03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
YES
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
80-T-31-2915
MANUFACTURE OF MONOLITHIC
COMPONENTS BY IMPREGNATION OF
DRY FIBERS ( RTM PROCESS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2915 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-31-2918
MANUFACTURE OF MONOLITHIC
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS BY MEANS OF THE
RESIN INFUSION (RI) PROCESS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2918 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
DONAUWOERTH
DONAUWOERTH
DONAUWOERTH
Germany
Germany
Germany
Germany
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
AIPI03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0230 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-03-012
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-03-014
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
BONDING OF BEARINGS AND BUSHES
BY ANAEROBIC COMPOUND
AIPI03-03-012
AIPI03-03-014
INSTALLATION OF BEARINGS,
SPHERICAL BEARINGS AND BUSHES
BY SWAGING
COLD BONDING OF BUSHES-BALLBEARINGS-SPHERICAL BEARINGS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 64 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-06-002
LOCKING USING TAB WASHERS
AIPI03-06-002
LOCKING USING TAB WASHERS
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-06-002
LOCKING USING TAB WASHERS
80-T-34-3013
SECURING WITH LOCKWASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3013 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-06-003
LOCKING USING WIRE
AIPI03-06-003
LOCKING BY WIRE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-06-003
LOCKING USING WIRE
80-T-34-3011
WIRE LOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3011 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
AIPI03-06-004
LOCKING USING ANAEROBIC
MATERIALS
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
80-T-34-3012
SECURING SCREWED CONNECTIONS
WITH ADHESIVE
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3012 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
DONAUWOERTH
Germany
AIPS03-06-009
SHIMMING FOR ASSEMBLY
AIPI03-06-009
SHIM FOR ASSEMBLY
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS03-06-014
LOCKING BY SPLIT PIN
AIPI03-06-014
LOCKING BY SPLIT PIN
NO
3 - QUALIFIED
NONE
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-06-014
LOCKING BY SPLIT PIN
80-T-34-3014
SAFETYING WITH SPLIT PINS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-3014 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
80-T-30-0032
MACHINING OF FRP COMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-0032 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-004
MANUFACTURE, INSTALLATION AND
REWORK OF INSULATION BLANKETS
AIPI03-07-004
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-004
MANUFACTURE, INSTALLATION AND
REWORK OF INSULATION BLANKETS
80-T-39-0331
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0331 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2950 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-021
PREPARATION OF DRY FIBER
PREFORMS FOR INFUSION &
INJECTION TECHNIQUES
AIPI03-07-021
PREPARATION OF DRY FIBER
PREFORM FOR INFUSION AND
INJECTION TECHNIQUES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 24/03/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-021
PREPARATION OF DRY FIBER
PREFORMS FOR INFUSION &
INJECTION TECHNIQUES
80-T-31-2915
MANUFACTURE OF MONOLITHIC
COMPONENTS BY IMPREGNATION OF
DRY FIBERS ( RTM PROCESS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2915 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-07-021
PREPARATION OF DRY FIBER
PREFORMS FOR INFUSION &
INJECTION TECHNIQUES
80-T-31-2918
MANUFACTURE OF MONOLITHIC
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS BY MEANS OF THE
RESIN INFUSION (RI) PROCESS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2918 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
80-T-31-2916
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2916 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-09-001
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
AIPI03-09-001
LASER CUTTING OF STEEL, TITANIUM,
AND NICKEL ALLOYS
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-09-003
SHEAR-CUTTING OF METALLIC
SHEETS AND SECTIONS
80-T-33-3010
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-33-3010 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-10-002
RECTIFICATION OF METALLIC
MATERIALS BY ROLL FORMING
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-32-1000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-10-003
RECTIFICATION OF METALLIC
MATERIALS BY 3 POINT BENDING
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
Yes
9 - LIMITED SCOPE (AIPS00-00006)
80-T-32-1000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-10-005
FORMING OF ALUMINIUM ALLOYS GENERAL REQUIREMENTS
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-32-1000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
DONAUWOERTH
Germany
AIPS03-10-011
HARD METAL FORMING - GENERAL
REQUIREMENTS
AIPI03-10-011
HARD METAL FORMING
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
MACHINING METALS BY MECHANICAL
ACTION
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS03-11-002
PRECISION GRINDING
80-T-30-6913
PRECISION GRINDING OF HARD
CHROMIUM LAYERS ON STEEL
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-6913 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
PRODUCTION, INSTALLATION AND
REWORK OF INSULATION BLANKETS
PRODUCTION, INSTALLATION AND
REWORK OF/ON INSULATION
BLANKETS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 65 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-11-002
PRECISION GRINDING
80-T-30-6912
GRINDING OF STEEL
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-6912 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
80-T-30-6918
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-30-6918 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS04-00-004
HEAT TREATMENT OF STEELS
80-T-36-1020
HEAT TREATMENT OF STEEL
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-1020 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-1010 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS04-01-002
HEAT TREATMENT OF SOLID RIVETS
80-T-34-5804
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5804 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS04-01-002
HEAT TREATMENT OF SOLID RIVETS
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-1010 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
80-T-36-1015
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-36-1015 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5256 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
80-T-35-5254
COATING WITH PUR-BASED VARNISH
ABRASION-RESISTANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5254 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
80-T-35-9127
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-006
APPLICATION OF DECORATIVE
INTERIOR PAINT
80-T-35-9123
PAINT COATING IN INTERIOR
FURNISHING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
DONAUWOERTH
Germany
AIPS05-02-009
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS05-02-011
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
AIPI05-02-009
AIPI05-02-011
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-011
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-011
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
80-T-35-9021
PRESERVATION OF CUT EDGES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9021 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
80-T-35-5202
COATING WITH HIGHLY ELASTIC
PAINTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5202 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-02-016
APPLICATION OF DECORATIVE SHEET
MATERIAL
80-T-35-5403
APPLICATION OF PVF FOIL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5403 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-03-005
CHEMICAL STRIPPING OF AIRCRAFT
EXTERNAL PAINT SYSTEM AND
REPAINTING
80-T-35-9125
REMOVAL OF ORGANIC COATINGS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-04-003
COSMETIC REWORK BY COLD CURE
ADHESIVE
80-T-35-9030
APPLICATION OF FILLERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9030 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-04-005
APPLICATION OF GAP FILLER - EASY
TO REMOVE
AIPI05-04-005
APPLICATION OF GAP FILLER-EASY TO
REMOVE
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-04-005
APPLICATION OF GAP FILLER - EASY
TO REMOVE
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 24/03/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5218 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
80-T-35-9023
PRESERVATION OF RIVET ROWS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIRBUS HELICOPTERS
157485
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
DONAUWOERTH
Germany
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
3 - QUALIFIED
80-T-35-9124
NONE
2015-02-02 - Page 66 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-004
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-5803 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
AIPI05-05-006
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
80-T-35-5903
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5903 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
AIPI05-05-008
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9600 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-01-004
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
80-T-35-0130
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-01-005
ETCHING OF POLYAMIDE ADHEREND
PRIOR TO ADHESIVE BONDING
80-T-35-0131
PRETREATMENT OF POLYAMIDE FOR
BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0131 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-01-006
PRIMING OF POLYAMIDE ADHEREND
PRIOR TO ADHESIVE BONDING
80-T-35-0131
PRETREATMENT OF POLYAMIDE FOR
BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0131 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-01-007
ETCHING OF FLUOROPOLYMER
ADHEREND PRIOR TO ADHESIVE
BONDING
80-T-35-0132
PRETREATMENT OF
FLUOROPLASTICS FOR BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0132 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
80-T-34-9033
BONDING WITH ADHESIVES ON
SILICONE BASIS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9033 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
80-T-34-9032
BONDING OF NON-STRUCTURAL
CONNECTIONS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9032 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-005
MANUFACTURING OF METALLIC
SANDWICH PARTS - BONDING
PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-005
MANUFACTURING OF METALLIC
SANDWICH PARTS - BONDING
PROCESS
80-T-34-9008
STRUCTURAL BONDING UNDER
REDUCED PRESSURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9008 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-31-2910 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-007
BONDING METAL / METAL PARTS
STRUCTURAL BONDING PROCESS
80-T-34-9008
STRUCTURAL BONDING UNDER
REDUCED PRESSURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9008 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS06-02-007
BONDING METAL / METAL PARTS
STRUCTURAL BONDING PROCESS
80-T-34-9000
BONDING OF STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-34-9000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
DONAUWOERTH
Germany
AIPS06-02-009
ADHESIVE TAPE BONDING
AIPI06-02-009
ADHESIVE TAPE BONDING
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-01-001
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-01-001
YES
9 - LIMITED SCOPE (AIPS00-00006)
none
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
80-T-40-3200
ELECTRICAL CONNECTORS
NO
9 - LIMITED SCOPE (AIPS00-00006)
none
Germany
AIPS07-01-003
CABLE TYING WITH NSA935401 OR
NSA8420
AIPI07-01-003
CABLE TYING WITH CABLE TIES
NSA935401 OR LACING TAPES
NSA8420
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-01-003
80-T-40-3701
TYING OF CABLE HARNESSES
NO
9 - LIMITED SCOPE (AIPS00-00006)
none
DONAUWOERTH
Germany
AIPS07-01-004
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-01-004
NO
9 - LIMITED SCOPE (AIPS00-00006)
none
DONAUWOERTH
Germany
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Airbus Qualified Special Process List (External Report)
157485
80-T-40-0101
MANUFACTURING AND INSTALLATION
OF CABLE HARNESS
INSTALLATION OF CABLE HARNESSES
IN AIRCRAFT
AIPS07-01-002
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIPI07-01-001
GENERAL REQUIREMENTS FOR THE
INSERTION AND EXTRACTION OF
REMOVABLE CONTACTS IN
ELECTRICAL CONNECTING SYSTEMS
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
MANUFACTURING AND INSTALLATION
OF CABLE HARNESSES
MANUFACTURING AND INSTALLATION
OF CABLE HARNESSES
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
APPLICATION OF LOW ADHESION
SEALANT
CABLE TYING WITH NSA935401 OR
NSA8420
TIGHTENING PROCEDURES FOR
ELECTRICAL EQUIPMENT
AIPI07-01-004
TIGHTENING PROCEDURES FOR
80-T-40-3050
ELECTRICAL EQUIPMENT
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
TIGHTENING PROCEDURE FOR
ELECTRICAL EQUIPMENT
TORQUES FOR THE FINAL
INSTALLATION OF ELECTRICAL
COMPONENTS
2015-02-02 - Page 67 of 876
External Shop
ARP-ID
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
157485
Company Name
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
DONAUWOERTH
Germany
AIPS07-01-005
TERMINATION OF UNWIRED SHIELDED
CABLES
AIPI07-01-005
TERMINATION OF UNWIRED SHIELDED
CABLES
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-01-006
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
none
DONAUWOERTH
Germany
AIPS07-01-007
INSTALLATION OF SOLDER SLEEVES
AIPI07-01-007
INSTALLATION OF SOLDER SLEEVES
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-02-001
AIPI07-02-001
STRIPPING OF THE ELECTRICAL
CABLES
YES
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
AIPS07-02-001
80-T-40-3218
STRIPPING OF ELECTRICAL CABLES
YES
DONAUWOERTH
Germany
AIPS07-02-008
DONAUWOERTH
Germany
AIPS07-03-001
DONAUWOERTH
Germany
AIPS07-03-001
DONAUWOERTH
Germany
AIPS07-04-019
DONAUWOERTH
Germany
AIPS07-05-032
DONAUWOERTH
Germany
AIPS07-05-042
DONAUWOERTH
Germany
AIPS07-05-047
DONAUWOERTH
Germany
AIPS07-06-001
DONAUWOERTH
Germany
AIPS07-06-001
DONAUWOERTH
Germany
AIPS07-06-002
DONAUWOERTH
Germany
AIPS07-06-003
GENERAL REQUIREMENTS FOR THE
STRIPPING OF ELECTRICAL CABLES
GENERAL REQUIREMENTS FOR THE
STRIPPING OF ELECTRICAL CABLES
INSTALLATION OF CONNECTORS
ASNE 0111 AND ASNE 0233
GENERAL REQUIREMENTS FOR
CRIMPING OF ELECTRICAL CONTACTS
GENERAL REQUIREMENTS FOR
CRIMPING OF ELECTRICAL CONTACTS
INSTALLATION OF FLAT TERMINALS
ABS 0909
INSTALLATION OF CONNECTORS
EN2997 AND EN3645
INSTALLATION OF CABLE BRACKETS
AND SUPPORTS
FITTING OF METALLIC CLAMP STRIPS
ASNE0805
LASER WIRE AND CABLE MARKING BY
ULTRA VIOLET (UV) PROCESS
LASER WIRE AND CABLE MARKING BY
ULTRA VIOLET (UV) PROCESS
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATIONS
PRINTING ON ELECTRICAL CABLES BY
HOT STAMPING
80-T-40-4001
AIPI07-03-001
CRIMPING OF CIRCULAR CONTACTS
TO COPPER WIRES
CRIMPING OF CONTACTS TO COPPER
CABLES
80-T-40-3217
80-T-40-3210
AIPI07-05-032
AIPI07-05-042
AIPI07-05-047
AIPI07-06-001
80-T-40-3714
AIPI07-06-002
80-T-40-3711
CRIMPEN VON KABELSCHUHEN
INSTALLATION OF PRESSURE-TIGHT
GROMMETS
INSTALLATION OF CONNECTORS
EN2997 AND EN3645
INSTALLATION OF CABLE BRACKETS
AND SUPPORTS
USE OF METALLIC CLAMPING STRIP
ASNE0805
LSER WIRE AND CABLE MARKING BY
ULTRA VIOLET (UV) PROCESS
MARKING OF ELECTRICAL CABLES
WITH UV LASER
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATION
MARKING OF ELECTRICAL EQUIPMENT
COMPONENTS
NO
YES
YES
NO
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
3 - QUALIFIED
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
none
none
NONE
none
none
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
none
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
none
AIPS07-07-002
FLEXIBLE TEXTILE SHEATHS EN6049003 TO EN6049-009, ASNE0559 AND
ABS0596 FOR EXTERNAL PROTECTION
OF ELECTRICAL CABLES
AIPI07-07-002
TEXTILE SHEATHS FOR PROTECTION
OF ELECTRICAL CABLES
YES
3 - QUALIFIED
NONE
AIPI07-07-005
INSTALLATION OF EMI PROTECTION
SLEEVES EN4674-003 AND EN4674-004
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS07-07-005
INSTALLATION OF WRAP AROUND
ELECTRICAL SLEEVING EMI
PROTECTION EN4674-003 AND EN4674004
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS07-09-002
ELECTRICAL AND OPTICAL TESTS OF
AIRCRAFT WIRING ( FUNCTIONAL
TESTS EXCLUDED )
AIPI07-09-002
ELECTRICAL AND OPTICAL TESTS OF
AIRCRAFT WIRING (FUNCTIONAL
TESTS EXCLUDED)
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS08-01-001
MARKING BY IMPRESS STAMPING
MACHINE
80-T-39-0133
IDENTIFICATION BY EMBOSSING
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS08-01-002
MARKING BY VIBRO-ENGRAVING
80-T-39-0134
MAKING BY VIBRO - ENGRAVING
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0134 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS08-02-005
APPLICATION OF MARKINGS FOR
EXTERNAL AIRCRAFT SURFACES
80-T-35-9127
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS08-03-002
PERMANENT MARKING WITH INK
AIPI08-03-002
PERMANENT MARKING WITH INK
NO
2 - AUTHORISATION TO
PROCEED UNTIL 24/03/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS08-03-002
PERMANENT MARKING WITH INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-39-0132 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-002
AIPI09-01-002
CLEANING WITH LIQUID NON AQUEOS
AGENTS
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-002
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0014 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-003
AIPI09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0030
ELECTROLYTIC DEGREASING
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0030 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0024
SPRAY CLEANING
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0024 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0023
ULTRASONIC CLEANING
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
DONAUWOERTH
Germany
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH AQUEOUS CLEANING
AGENTS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 68 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0020
ALKALINE CLEANING
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0020 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-01-003
CLEANING WITH AQUEOUS CLEANING
AGENTS
80-T-35-0019
CLEANING WITH EMULSION CLEANING
AGENTS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0019 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
AIPI09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 27/02/2015
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
80-T-35-0106
PICKLING OF TITANIUM AND TITANIUM
ALLOYS - ACID -
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0106 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-03-001
CHEMICAL MILLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
80-T-33-3510
CHEMICAL MILLING OF ALUMINUM AND
ALUMINUM ALLOYS
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-33-3510 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AIPS09-04-001
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
80-T-35-9127
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AITM6-4011
ULTRASONIC INSPECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
AITM6-5002
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-31-00
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-34-00
FINAL MATERIAL INSPECTION OF
METALLIC DETAIL PARTS MADE OF
SEMI-FINISHED SHEET, STRIPS,
SECTIONS AND TUBING
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-35-00
FINAL MATERIAL INSPECTION OF
MACHINED METALLIC COMPONENTS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
QVA-Z10-36-00
QUALITY CHARACTERISTICS FOR
FINAL MATERIALS TESTING OF
ALUMINIUM AND MAGNESIUM ALLOY
COMPONENTS - HARDNESS AND
CONDUCTIVITY -
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-49-00
MAGNETIC CRACK TEST WITH
FLUORESCENT DETECTION AGENTS CANCELLED AND REPLACED BY AITM
6-2001
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-49-00
MAGNETIC CRACK TEST WITH
FLUORESCENT DETECTION AGENTS CANCELLED AND REPLACED BY AITM
6-2001
QVA-Z10-49-00
MAGNETIC CRACK TEST WITH
FLUORESCENT DETECTION AGENTS CANCELLED AND REPLACED BY AITM
6-2001
NO
3 - qualified
none
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
QVA-Z10-50-01
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-50-01
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
QVA-Z10-50-01
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
NO
3 - qualified
none
QVA-Z10-50-02
THICKNESS MEASUREMENT OF NONFERROMAGNETIC LAYERS ON
FERROMAGNETIC MATERIALS BY
MAGNETIC FLUX - CANCELLED AND
REPLACED BY AITM 6-6006
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-50-02
THICKNESS MEASUREMENT OF NONFERROMAGNETIC LAYERS ON
FERROMAGNETIC MATERIALS BY
MAGNETIC FLUX - CANCELLED AND
REPLACED BY AITM 6-6006
QVA-Z10-50-02
THICKNESS MEASUREMENT OF NONFERROMAGNETIC LAYERS ON
FERROMAGNETIC MATERIALS BY
MAGNETIC FLUX - CANCELLED AND
REPLACED BY AITM 6-6006
NO
3 - qualified
none
QVA-Z10-50-03
THICKNESS MEASUREMENTS OF
ELECTRICALLY NON-CONDUCTING
LAYERS ON NON-FERROMAGNETIC
ALLOYS - CANCELLED AND REPLACED
BY AITM 6-6006
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-50-03
THICKNESS MEASUREMENTS OF
ELECTRICALLY NON-CONDUCTING
LAYERS ON NON-FERROMAGNETIC
ALLOYS - CANCELLED AND REPLACED
BY AITM 6-6006
NO
3 - qualified
none
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
DONAUWOERTH
DONAUWOERTH
DONAUWOERTH
DONAUWOERTH
DONAUWOERTH
Germany
Germany
Germany
Germany
Germany
Germany
ULTRASONIC RESONANCE
IMPEDANCE INSPECTION USING
FOKKER BOND TESTER
ELECTRICAL TESTING OF BONDING
CONNECTIONS - GENERAL
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-50-03
THICKNESS MEASUREMENTS OF
ELECTRICALLY NON-CONDUCTING
LAYERS ON NON-FERROMAGNETIC
ALLOYS - CANCELLED AND REPLACED
BY AITM 6-6006
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-50-04
HF EDDY CURRENT SURFACE CRACK
INSPECTION
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 69 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Title (PI)
Special
Process
Status
QVA-Z10-50-04
HF EDDY CURRENT SURFACE CRACK
INSPECTION
NO
3 - qualified
none
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-50-05
CRACK DETECTION BY DYNAMIC EDDY
CURRENT INSPECTION WITH
ROTATING PROBES
NO
3 - qualified
none
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ULTRASONIC TESTING - GENERAL CANCELLED AND REPLACED BY AITM
6-4011
QVA-Z10-52-00
ULTRASONIC TESTING - GENERAL CANCELLED AND REPLACED BY AITM
6-4011
NO
3 - qualified
none
QVA-Z10-52-01
THICKNESS MEASUREMENTS
ACCORDING TO THE PULSE ECHO
PROCEDURE - CANCELLED AND
REPLACED BY AITM 6-4014
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-52-01
THICKNESS MEASUREMENTS
ACCORDING TO THE PULSE ECHO
PROCEDURE - CANCELLED AND
REPLACED BY AITM 6-4014
QVA-Z10-52-01
THICKNESS MEASUREMENTS
ACCORDING TO THE PULSE ECHO
PROCEDURE - CANCELLED AND
REPLACED BY AITM 6-4014
NO
3 - qualified
none
QVA-Z10-52-02
ULTRASONIC RESONANCE
INSPECTION USING THE FOKKER
BONDTESTER - CANCELLED AND
REPLACED BY AITM 6-5002
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ULTRASONIC RESONANCE
INSPECTION USING THE FOKKER
BONDTESTER - CANCELLED AND
REPLACED BY AITM 6-5002
QVA-Z10-52-02
ULTRASONIC RESONANCE
IMPEDANCE INSPECTION USING THE
FOKKER BOND TESTER - CANCELLED
AND REPLACED BY AITM 6-5002
NO
3 - qualified
none
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-52-03
ULTRASONIC INSPECTION OF
SEAMLESS TUBES OF TI3A12, 5V
NO
3 - qualified
none
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
Company Name
City
Country
Ref. No. (PS)
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-50-04
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-50-05
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-50-05
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-51-00
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-52-00
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-52-00
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
Germany
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
ARP-ID
DONAUWOERTH
Couple qualification Status
Title (PS)
DONAUWOERTH
Germany
QVA-Z10-52-02
DONAUWOERTH
Germany
QVA-Z10-52-03
DONAUWOERTH
Germany
QVA-Z10-52-03
DONAUWOERTH
Germany
QVA-Z10-54-03
HF EDDY CURRENT SURFACE CRACK
INSPECTION
CRACK DETECTION BY DYNAMIC EDDY
CURRENT INSPECTION WITH
ROTATING PROBES
CRACK DETECTION BY DYNAMIC EDDY
CURRENT INSPECTION WITH
ROTATING PROBES
SURFACE RESISTANCE
MEASUREMENTS
ULTRASONIC TESTING - GENERAL CANCELLED AND REPLACED BY AITM
6-4011
ULTRASONIC INSPECTION OF
SEAMLESS TUBES OF TI3A12, 5V
ULTRASONIC INSPECTION OF
SEAMLESS TUBES OF TI3A12, 5V
EXAMINATION FOR COPPER
DIFFUSION IN CLADDING
RADIOGRAPHIC INSPECTION, GENERAL - CANCELLED AND
REPLACED BY AITM 6-7002
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-56-00
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-56-00
RADIOGRAPHIC INSPECTION, GENERAL - CANCELLED AND
REPLACED BY AITM 6-7002
QVA-Z10-56-00
RADIOGRAPHIC INSPECTION, GENERAL - CANCELLED AND
REPLACED BY AITM 6-7002
NO
3 - qualified
none
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-57-00
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-57-00
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
QVA-Z10-57-00
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
NO
3 - qualified
none
DONAUWOERTH
Germany
QVA-Z10-58-00
DROP TEST, GENERAL
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
DONAUWOERTH
Germany
QVA-Z10-58-01
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
157485
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-58-02
157485
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
DONAUWOERTH
Germany
QVA-Z10-59-05
DONAUWOERTH
Germany
QVA-Z10-61-00
DONAUWOERTH
Germany
QVA-Z10-62-00
DONAUWOERTH
Germany
QVA-Z10-62-01
DONAUWOERTH
Germany
QVA-Z10-73-00
COLON
Mexico
80-T-30-4010
COLON
Mexico
80-T-30-6918
COLON
Mexico
80-T-30-6919
157485
157485
157485
157485
305158
305158
305158
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS
DEUTSCHLAND GMBH
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
Airbus Qualified Special Process List (External Report)
DROP TEST FOR CORROSION
RESISTANCE TESTING OF STEELS
DROP TEST ON ALUMINIUM AND
ALUMINIUM ALLOYS - CANCELLED AND
REPLACED BY AITM 3-0007
INTERCRYSTALLINE CORROSION
TEST FOR STAINLESS STEELS CANCELLED AND REPLACED BY DIN
EN ISO 3651-2
DETERMINATION OF PARTICLE SIZES
MEASUREMENT OF LAYER THICKNESS
BY MICRON ROLL
WET-FILM-THICKNESS MEASUREMENT
WITH MICROMETER COMB
TEST INVOLVING ELECTRODEPOSITION OF A COATING IN THE
HULL CELL
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
VIBRATORY GRINDING
80-T-30-4010
80-T-30-6918
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
80-T-30-6919
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
VIBRATORY GRINDING
2015-02-02 - Page 70 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Status
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
SCREW LOCKING
NO
3 - QUALIFIED
NONE
80-T-34-3011
WIRE LOCKING
NO
3 - QUALIFIED
NONE
SECURING SCREWED CONNECTIONS
WITH ADHESIVE
80-T-34-3012
SECURING SCREWED CONNECTIONS
WITH ADHESIVE
NO
3 - QUALIFIED
NONE
80-T-34-3013
SECURING WITH LOCKWASHERS
80-T-34-3013
SECURING WITH LOCKWASHERS
NO
3 - QUALIFIED
NONE
Mexico
80-T-34-3014
SAFETYING WITH SPLIT PINS
80-T-34-3014
SAFETYING WITH SPLIT PINS
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-3015
SECURING WITH WASHERS
80-T-34-3015
SECURING WITH WASHERS
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-3016
SELF - LOCKING NUTS
80-T-34-3016
SELF - LOCKING NUTS
TBD
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-3200
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5661
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5801
CLOSE RIVETING ( EDGE SEALING )
80-T-34-5801
CLOSE RIVETING ( EDGE SEALING )
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5802
CLOSE RIVETING ( AREA SEALING )
80-T-34-5802
CLOSE RIVETING ( AREA SEALING )
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5804
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
80-T-34-5804
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5812
INSTALLATION OF LOCKBOLTS
80-T-34-5812
INSTALLATION OF LOCKBOLTS
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5815
INSTALLATION OF HI-LOKS
80-T-34-5815
INSTALLATION OF HI-LOKS
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-5822
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-9020
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-9032
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-34-9600
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-0014
NO
3 - QUALIFIED
LIMITED TO HAND APPLICATION ONLY
COLON
Mexico
80-T-35-0020
ALKALINE CLEANING
80-T-35-0020
ALKALINE CLEANING
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-0090
RINSING
80-T-35-0090
RINSING
TBD
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-0095
WATER QUALITY
80-T-35-0095
WATER QUALITY
TBD
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-0100
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-0110
NO
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-0130
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-0132
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-1101
YES
3 - QUALIFIED
NONE
Company Name
City
Country
Ref. No. (PS)
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-30-9910
COLON
Mexico
80-T-32-1000
COLON
Mexico
80-T-32-2310
COLON
Mexico
80-T-34-3000
COLON
Mexico
80-T-34-3001
COLON
Mexico
80-T-34-3002
COLON
Mexico
80-T-34-3003
COLON
Mexico
80-T-34-3006
COLON
Mexico
80-T-34-3010
SCREW LOCKING
80-T-34-3010
COLON
Mexico
80-T-34-3011
WIRE LOCKING
COLON
Mexico
80-T-34-3012
COLON
Mexico
COLON
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
Airbus Qualified Special Process List (External Report)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
ARP-ID
305158
Couple qualification Status
Title (PS)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
PRODUCTION OF JOGGLES AT ALSECTIONS
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF ROSAN THREADED
INSERTS
INSTALLATION OF HELICAL THREADED
INSERTS
IDENTIFICATION OF TORQUETIGHTENED SCREWED CONNECTIONS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
INSTALLATION OF BEARINGS /
BUSHES BY BONDING
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
PRETREATMENT OF
FLUOROPLASTICS FOR BONDING
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
Ref. No. (PI)
80-T-30-9910
80-T-32-1000
80-T-32-2310
Title (PI)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
PRODUCTION OF JOGGLES AT ALSECTIONS
80-T-34-3000
80-T-34-3001
80-T-34-3002
80-T-34-3003
80-T-34-3006
80-T-34-3200
80-T-34-5661
80-T-34-5822
80-T-34-9020
80-T-34-9032
80-T-34-9600
80-T-35-0014
80-T-35-0100
80-T-35-0110
80-T-35-0130
80-T-35-0132
80-T-35-1101
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF ROSAN THREADED
INSERTS
INSTALLATION OF HELICAL THREADED
INSERTS
IDENTIFICATION OF TORQUETIGHTENED SCREWED CONNECTIONS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
INSTALLATION OF BEARINGS /
BUSHES BY BONDING
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
PRETREATMENT OF
FLUOROPLASTICS FOR BONDING
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 71 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-35-2010
TARTARIC/SULFURIC ACID ANODIZING
OF ALUMINUM ALLOYS
80-T-35-2010
TARTARIC/SULFURIC ACID ANODIZING
OF ALUMINUM ALLOYS
TBD
10 - LIMITED SCOPE - AIPS 0000-006 (MANUAL)
ALUMINIUM 7475 SERIES ARE
SUSPENDED FROM THIS PROCESS
DUE TO ANODIZING BATH PROBLEMS.
COLON
Mexico
80-T-35-5002
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-5030
TBD
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-5106
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-5130
TBD
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-5218
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-5702
TBD
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-9021
PRESERVATION OF CUT EDGES
80-T-35-9021
PRESERVATION OF CUT EDGES
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-9023
PRESERVATION OF RIVET ROWS
80-T-35-9023
PRESERVATION OF RIVET ROWS
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-35-9120
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
305158
305158
305158
305158
305158
305158
305158
305158
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH PUR - BASED TOP
COAT
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
PRESERVATION FOR INTERMEDIATE
STORAGE
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-5002
80-T-35-5030
80-T-35-5106
80-T-35-5130
80-T-35-5218
80-T-35-5702
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH PUR - BASED TOP
COAT
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
PRESERVATION FOR INTERMEDIATE
STORAGE
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-9120
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-35-9124
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-35-9125
REMOVAL OF ORGANIC COATINGS
80-T-35-9125
REMOVAL OF ORGANIC COATINGS
YES
3 - QUALIFIED
NONE
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-35-9799
APPLICATION OF WATER-REPELLENT,
WATER-DISPLACING AND CORROSIONINHIBITING PREVENTIVES
80-T-35-9799
APPLICATION OF WATER-REPELLENT,
WATER-DISPLACING AND CORROSIONINHIBITING PREVENTIVES
NO
3 - QUALIFIED
NONE
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-39-0116
INSTALLATION OF SHIMS IN METALLIC
STRUCTURES
80-T-39-0116
INSTALLATION OF SHIMS IN METALLIC
STRUCTURES
NO
3 - QUALIFIED
DRAWING HAS BEEN MODIFIED,
MANUFACTURING INSTRUCTIONS
HAVE BEEN ISSUED
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
NONE
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-39-0141
APPLICATION AND PROTECTION OF
IDENTIFICATION AND PLATES AND
PLACARDS
80-T-39-0141
APPLICATION AND PROTECTION OF
IDENTIFICATION AND PLATES AND
PLACARDS
NO
3 - QUALIFIED
NONE
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
YES
3 - QUALIFIED
NONE
305158
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
COLON
Mexico
80-T-39-0331
YES
3 - QUALIFIED
NONE
COLON
Mexico
80-T-39-0501
TBD
3 - QUALIFIED
NONE
COLON
Mexico
80-T-40-3312
NO
3 - QUALIFIED
NONE
UEBERSEE
Germany
80-T-30-9910
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
UEBERSEE
Germany
80-T-34-3003
YES
3 - QUALIFIED
NONE
UEBERSEE
Germany
80-T-34-3200
YES
3 - QUALIFIED
NONE
UEBERSEE
Germany
80-T-34-5661
YES
3 - QUALIFIED
NONE
UEBERSEE
Germany
80-T-34-5803
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
305158
305158
264640
264640
264640
264640
264640
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRBUS HELICOPTERS MEXICO
PLANTA QUERETARO SA DE C
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
PRODUCTION, INSTALLATION AND
REWORK OF/ON INSULATION
BLANKETS
PREVENTION OF CORROSION DURING
PRODUCTION
ELECTRICAL BONDING
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
INSTALLATION OF HELICAL THREADED
INSERTS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
80-T-35-9124
80-T-39-0331
80-T-39-0501
PRODUCTION, INSTALLATION AND
REWORK OF/ON INSULATION
BLANKETS
PREVENTION OF CORROSION DURING
PRODUCTION
80-T-40-3312
80-T-30-9910
80-T-34-3003
80-T-34-3200
80-T-34-5661
ELECTRICAL BONDING
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
INSTALLATION OF HELICAL THREADED
INSERTS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
80-T-34-9600
APPLICATION OF SEALING
COMPOUNDS
YES
3 - QUALIFIED
LIMITED TO CARTIDGE SEALANT
(FROZEN SEALANT CURRENTLY NOT
IN USE)
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
3 - QUALIFIED
NONE
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
UEBERSEE
Germany
80-T-35-1101
YES
3 - QUALIFIED
USE OF ALODINE PEN ONLY
UEBERSEE
Germany
80-T-35-5002
YES
3 - QUALIFIED
FOR REWORKS ONLY
UEBERSEE
Germany
80-T-35-5030
TBD
3 - QUALIFIED
FOR REWORKS ONLY
264640
264640
264640
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
Airbus Qualified Special Process List (External Report)
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
80-T-35-1101
80-T-35-5002
80-T-35-5030
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 72 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Status
YES
3 - QUALIFIED
FOR REWORKS ONLY
TBD
3 - QUALIFIED
FOR REWORKS ONLY
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
FOR REWORKS ONLY
YES
3 - QUALIFIED
NONE
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
YES
3 - QUALIFIED
NONE
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
Company Name
City
Country
Ref. No. (PS)
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-5106
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-5130
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-5218
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-5903
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-5905
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-9120
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-35-9124
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
80-T-39-0230
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
264640
AIRCRAFT PHILIPP GMBH & CO
KG
UEBERSEE
Germany
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
264640
AIRCRAFT PHILIPP GMBH & CO
KG
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
264640
264640
264640
264640
264640
188680
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP GMBH & CO
KG
AIRCRAFT PHILIPP
KARLSRUHE GMBH
Germany
UEBERSEE
Germany
ABP4-2128
UEBERSEE
Germany
ABP4-2130
UEBERSEE
Germany
ABP4-2361
UEBERSEE
Germany
ABP6-5229
UEBERSEE
Germany
ABP6-5230
KARLSRUHE
Germany
80-T-30-9910
COATING WITH PUR - BASED TOP
COAT
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
WET ASSEMBLY OF COMPONENTS
WITH CORROSION PREVENTIVES ON A
CHROMATE BASIS
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
Ref. No. (PI)
80-T-35-5106
80-T-35-5130
80-T-35-5218
80-T-35-5903
80-T-35-5905
80-T-35-9120
80-T-35-9124
ABP4-2130
ABP4-2361
Title (PI)
COATING WITH PUR - BASED TOP
COAT
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
WET ASSEMBLY OF COMPONENTS
WITH CORROSION PREVENTIVES ON A
CHROMATE BASIS
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
YES
9 - LIMITED SCOPE (AIPS00-00006)
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)80-T-30-9910 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
MANUAL
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-02-STQ-06-IP2-321-A0)
TBD
3 - QUALIFIED
MANUAL
SUBCONTRACTOR (S/C) PROCESS
MARTENSITIC AND AUSTENITIC
NO_AIRBUS_PI
INSTRUCTION
STAINLESS STEEL PASSIVATION
(QUALIF62-45A-STQ-06-IP2-321-A0)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
3 - QUALIFIED
AUSTENITIE STANLEES STEEL ONLY
188680
AIRCRAFT PHILIPP
KARLSRUHE GMBH
KARLSRUHE
Germany
AIPS01-02-003
252519
AIRGRUP SL
LA RINCONADA
Spain
80-T-34-0108
252519
252519
252519
AIRGRUP SL
AIRGRUP SL
AIRGRUP SL
LA RINCONADA
LA RINCONADA
LA RINCONADA
Spain
Spain
Spain
80-T-34-5669
80-T-34-5670
80-T-34-6620
252519
AIRGRUP SL
LA RINCONADA
Spain
80-T-35-1101
252519
AIRGRUP SL
LA RINCONADA
Spain
80-T-35-5002
252519
AIRGRUP SL
LA RINCONADA
Spain
80-T-35-5106
252519
AIRGRUP SL
LA RINCONADA
Spain
80-T-39-0110
252519
AIRGRUP SL
LA RINCONADA
Spain
80-T-39-0136
252519
AIRGRUP SL
LA RINCONADA
Spain
ADET0074
GENERAL REQUIREMENTS ON
WELDING ( ALL MATERIALS )
NO_AIRBUS_PI
252519
AIRGRUP SL
LA RINCONADA
Spain
ADET0203
TIG WELDING
NO_AIRBUS_PI
252519
AIRGRUP SL
LA RINCONADA
Spain
ADET0268
Airbus Qualified Special Process List (External Report)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
ARP-ID
UEBERSEE
Title (PS)
Couple qualification Status
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ROLLER SWAGING OF TITANIUM
TUBES INTO TUBE FITTINGS ( 3GROOVES HARRISON
)
PIPE CONNECTIONS
SYSTEM
PIPING DEUTSCH SYSTEM
INERT GAS FUSION WELDING (TIG)
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COAT
PRODUCTION OF PIPING
IDENTIFICATION BY
ELECTROCHEMICAL ETCHING
80-T-30-9910
80-T-34-0108
80-T-34-5669
80-T-34-5670
80-T-34-6620
80-T-35-1101
80-T-35-5002
80-T-35-5106
80-T-39-0110
80-T-39-0136
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
ROLLER SWAGING OF TITANIUM
TUBES INTO TUBE FITTINGS ( 3GROOVES HARRISON
)
PIPE CONNECTIONS
SYSTEM
PIPING DEUTSCH SYSTEM
INERT GAS FUSION WELDING (TIG)
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COAT
PRODUCTION OF PIPING
IDENTIFICATION BY
ELECTROCHEMICAL ETCHING
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-02-STQ-06-IP2-321-A0)
2015-02-02 - Page 73 of 876
External Shop
Special
Process
Status
NO
3 - QUALIFIED
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NONE
YES
3 - QUALIFIED
NONE
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
QUALIFICATION TYPE 1 A+B
ACCORDING TO AP3145-E (MIX AND
APPLICATION OF SEALANT) .
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
QUALIFICATION TYPE 1 A+B
ACCORDING TO AP3145-E (MIX AND
APPLICATION OF SEALANT) .
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-01-004
AIPI01-01-004
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-02-008
INSTALLATION OF SOLID RIVETS
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF SOLID RIVETS
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
I+D-P-231
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
I+D-P-146
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-02-017
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-02-017
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-02-019
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-02-022
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-04-008
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-04-008
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS01-04-008
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-01-001
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-01-003
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-02-002
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-04-009
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
I+D-P-202
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI01-02-008
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
AIPI01-02-017
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-364
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
DRY BLASTING
APPLICATION OF CORROSION
INHIBITING SOLID FILM LUBRICANT
I+D-L-113
I+D-P-366
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALACION DE CASQUILLOS EN
MONTAJE CON INTERFERENCIA
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
I+D-P-181
FUSION WELDING OF METALS
YES
3 - QUALIFIED
NONE
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
3 - QUALIFIED
NONE
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
NONE
I+D-P-213
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
YES
3 - QUALIFIED
VALID ONLY FOR CHROMIC ACID
ANODIZING 20 V
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
TSA UNSEALED WITH PAINT
APPLICATION ONLY
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
YES
3 - QUALIFIED
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-45A-STQ-06-IP2-321-A0)
AIPI02-02-002
DRY BLASTING
DRY LUBRICATION (MOLYBDENUM
DISULFIDE BASE)
I+D-P-058
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-05-003
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
NO_AIRBUS_PI
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
AIPI02-05-005
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
I+D-P-038
PASSIVATION OF CORROSION
RESISTANT STEEL
CLEANING AND PASSIVATION OF
STAINLESS STEELS AND
REFRACTORY NICKEL AND COBALT
ALLOYS
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS03-01-001
ROLLER SWAGING FOR NON
HYDRAULIC FITTING /COUPLING
I+D-P-319
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS03-01-010
MANUFACTURING OF PIPES
I+D-P-309
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS03-01-010
AIPI03-01-010
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS03-01-012
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS03-03-012
MANUFACTURING OF PIPES
EXTERNAL SWAGING OF FITTINGS ON
5 080 PSI TITANIUM TUBES
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS03-03-013
EXTERNAL SWAGED PIPE SOCKETS
I+D-P-312
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS03-06-007
EXTERNAL SWAGED TUBE FITTINGS
I+D-P-312
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
I+D-P-220
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
AIPI04-01-001
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-358
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-064
252519
AIRGRUP SL
Airbus Qualified Special Process List (External Report)
LA RINCONADA
Spain
APPLICATION OF EXTERNAL PAINT
AIPS05-02-003
AIPI05-02-003
SYSTEMS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
AIPI03-01-012
AIPI03-03-012
SWAGING OF FLUID SYSTEMS (
GAMAH, AVICA AND WIGGINGS )
BENDING OF TUBES FOR FLUID
SYSTEMS
MANUFACTURING OF PIPES
EXTERNAL SWAGING OF FITTINGS ON
5080 PSI TITANIUM TUBES
INSTALLATION OF BEARINGS,
SPHERICAL BEARINGS AND BUSHES
BY SWAGING
PERMASWAGE SWAGING ON TUBES
INTENDED FOR FLUID SYSTEM
PERMASWAGE SWAGING ON TUBES
INTENDED FOR FLUID SYSTEM
HEAT TREATMENTS OF ALUMINIUM
ALLOYS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
PAINTING OF COMPOSITE DETAIL
PARTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ONLY TYPE I, APPLICATION WITH
BRUSH IN REPAIRS OF DAMAGE AND
BONDING POINTS PROTECTION.
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
AUSTENITIE STANLEES STEEL
ONLYADET0268 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
YES
3 - QUALIFIED
CORROSION RESISTANT STEEL WITH
RM < 1100 MPA ONLY
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
ONLY APPLICABLE TO CRIMPING OF
TERMINALS GAMAH IN TUBES OF
ALUMINIUM ALLOYS 5052-0, IN
DIAMETER OF 1" AND 1,5".
QUALIFICATION FOR GAMAH
SWAGING ONLY.
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY FOR PERMALITE SWAGING
YES
3 - QUALIFIED
PROCESS AND REQUIREMENTS IN
ACCORDANCE WITH THE SPEC
CAN64143
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
YES
3 - QUALIFIED
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/05/2015
ONLY VALID FOR ALUMINIUN ALLOYS
6061, FINAL CONDITIONING T42 AND
T62
ONLY APPLIED FOR 0.8 MM. THIKNESS
OR HIGHER
RESTRICTED TO CLEAR COAT
2015-02-02 - Page 74 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS05-02-009
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS05-02-009
252519
252519
252519
252519
AIRGRUP SL
AIRGRUP SL
AIRGRUP SL
AIRGRUP SL
LA RINCONADA
LA RINCONADA
LA RINCONADA
LA RINCONADA
Spain
Spain
Spain
Spain
AIPS05-02-009
AIPS05-02-009
AIPS05-02-009
AIPS05-02-009
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS05-02-009
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS05-02-011
252519
303923
AIRGRUP SL
AIRGRUP SL
LA RINCONADA
LA RINCONADA
Spain
Spain
AIPS05-05-001
AIPS05-05-001
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS05-05-003
252519
303923
AIRGRUP SL
AIRGRUP SL
LA RINCONADA
LA RINCONADA
Spain
Spain
AIPS05-05-004
AIPS05-05-004
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION
OF STRUCTURAL
PAINTS
APPLICATION
OF STRUCTURAL
PAINTS
APPLICATION
OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
SEALING OF AIRCRAFT STRUCTURE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
WET INSTALLATION OF FASTENERS
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS07-01-006
ELECTRICAL BONDING
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS08-02-004
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS08-03-002
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS09-01-002
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS09-01-002
303923
AIRGRUP SL
LA RINCONADA
Spain
AIPS09-01-002
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS09-01-003
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS09-02-004
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS09-02-005
252519
AIRGRUP SL
LA RINCONADA
Spain
AIPS09-02-005
252519
AIRGRUP SL
LA RINCONADA
Spain
AITM6-1001
252519
AIRGRUP SL
LA RINCONADA
Spain
AITM6-6004
252519
AIRGRUP SL
LA RINCONADA
Spain
AITM6-6006
252519
AIRGRUP SL
LA RINCONADA
Spain
AITM6-7002
252519
AIRGRUP SL
LA RINCONADA
Spain
AITM6-9004
252519
252519
AIRGRUP SL
AIRGRUP SL
LA RINCONADA
LA RINCONADA
Spain
Spain
I+D-E-137
I+D-E-138
252519
AIRGRUP SL
LA RINCONADA
Spain
I+D-E-140
252519
AIRGRUP SL
LA RINCONADA
Spain
I+D-L-113
303923
AIRGRUP SL
LA RINCONADA
Spain
I+D-L-113
252519
AIRGRUP SL
LA RINCONADA
Spain
I+D-P-199
252519
AIRGRUP SL
LA RINCONADA
Spain
I+D-P-342
252519
AIRGRUP SL
LA RINCONADA
Spain
I+D-P-355
303923
AIRGRUP SL
LA RINCONADA
Spain
I+D-P-355
252519
AIRGRUP SL
LA RINCONADA
Spain
IGC04-25-100
252519
AIRGRUP SL
LA RINCONADA
Spain
IGC04-25-101
Airbus Qualified Special Process List (External Report)
Title (PS)
PRINTING AND INSTALLATION OF
THERMAL ACTIVATED IDENTIFICATION
TAPES ABS0652 AND ABS0653
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH AQUEOUS CLEANING
AGENTS
ALKALINE ETCHING OF ALUMINIUM
ALLOYS - BASIC
PICKLING OF TITANIUM AND ITS
ALLOYS
PICKLING OF TITANIUM AND ITS
ALLOYS
PENETRANT TESTING
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
INSPECTION FOR CONFIRMATION OF
THE ANODISING PROCESS (BASED
UPON MEASUREMENT OF SURFACE
RESISTANCE)
PENETRANT INSPECTION PROCESS
RADIOGRAPHIC INSPECTION
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
SWAGING OF FLARELESS TUBES
INTENDED FOR FLUID SYSTEMS
ORBITAL TUBE WELDING
BONDING AND GROUNDING
INSTALLATION
BONDING AND GROUNDING
INSTALLATION
METALLIC ELEMENTS LIQUID
PENETRANT INSPECTION
FLUORESCENT DYE PENETRANT
INSPECTION ALLOWED MATERIALS
Ref. No. (PI)
Couple qualification Status
Title (PI)
PAINTING OF COMPOSITE DETAIL
PARTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION
OF STRUCTURAL
PAINTS
PAINT (GENERAL SPECIFICATION)
PAINT (GENERAL SPECIFICATION)
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
APPLICATION OF SEALANTS
APPLICATION OF SEALANTS
I+D-P-358
I+D-P-064
AIPI05-02-009
AIPI05-02-009
I+D-P-060
I+D-P-060
I+D-P-064
AIPI05-02-011
I+D-P-146
I+D-P-146
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
YES
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
METALLIC PARTS
NONE
None
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
I+D-P-186
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
YES
3 - QUALIFIED
NONE
I+D-P-146
AIPI05-05-004
APPLICATION OF SEALANTS
WET INSTALLATION OF FASTENERS
YES
YES
3 - QUALIFIED
3 - QUALIFIED
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
NONE
ONLY FOR METALIC MATERIAL AND
TYPE I
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
MANUAL HAND APPLICATION ONLY
(WIPE CLEAN)
NO
3 - QUALIFIED
None
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
AIPI08-03-002
PRINTING AND INSTALLATION OF
THERMAL ACTIVATED IDENTIFICATION
TAPES ABS 0652 AND ABS 0653
PERMANENT MARKING WITH INK
I+D-P-147
MANUAL CLEANING WITH SOLVENTS
AIPI08-02-004
NA
DEGREASING WITH STABILIZED
ORGANIC SOLVENTS IN VAPOUR
PHASE
CLEANING WITH LIQUID NON AQUEOS
AGENTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
CLEANING AND PICKLING OF
ALUMINIUM AND ITS ALLOYS
CLEANING AND PICKLING OF
TITANIUM AND TITANIUM ALLOYS
PICKLING OF TITANIUM AND ITS
ALLOYS
NOT APPLICABLE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NA
NOT APPLICABLE
NOT APPLICABLE
NO
NO
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
3 - QUALIFIED
None
NA
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
N/A
YES
3 - QUALIFIED
YES
3 - QUALIFIED
Only for titanium alloys
LIMITED ONLY METALIC TO MATERIAL
AND TYPE I ACCORDING TO I+D-P-355
YES
3 - QUALIFIED
NONE
I+D-P-009
AIPI09-01-002
NO_AIRBUS_PI
I+D-P-072
I+D-P-090
AIPI09-02-005
I+D-L-113
I+D-L-113
I+D-P-199
I+D-P-342
I+D-P-355
I+D-P-355
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
SWAGING OF FLARELESS TUBES
INTENDED FOR FLUID SYSTEMS
ORBITAL TUBE WELDING
BONDING AND GROUNDING
INSTALLATION
BONDING AND GROUNDING
INSTALLATION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 75 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
252519
AIRGRUP SL
LA RINCONADA
Spain
IGC04-25-102
252519
AIRGRUP SL
LA RINCONADA
Spain
IGC04-25-110
AICHACH
Germany
80-T-35-0200
AICHACH
Germany
80-T-35-5002
AICHACH
Germany
80-T-35-5022
AICHACH
Germany
80-T-35-5106
AICHACH
Germany
80-T-35-9120
158356
158356
158356
158356
158356
ALCOA FASTENING SYSTEMS
AICHACH GMBH
ALCOA FASTENING SYSTEMS
AICHACH GMBH
ALCOA FASTENING SYSTEMS
AICHACH GMBH
ALCOA FASTENING SYSTEMS
AICHACH GMBH
ALCOA FASTENING SYSTEMS
AICHACH GMBH
Title (PS)
VISUAL INSPECTIONS UNDER
ULTAVIOLET RADIATION
RADIOGRAPHIC INSPECTION
INSTRUCTIONS
ABRASIVE BLASTING - CLEANING COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO - COMPONENT
PRIMER ( EP - BASED )
COATING WITH PUR - BASED TOP
COAT
COATING WITH PAINTS AND
VARNISHES, GENERAL
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
80-T-35-5002
80-T-35-5022
80-T-35-5106
80-T-35-9120
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO - COMPONENT
PRIMER ( EP - BASED )
COATING WITH PUR - BASED TOP
COAT
COATING WITH PAINTS AND
VARNISHES, GENERAL
158356
ALCOA FASTENING SYSTEMS
AICHACH GMBH
AICHACH
Germany
AIPS02-02-002
DRY BLASTING
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0200 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
158356
ALCOA FASTENING SYSTEMS
AICHACH GMBH
AICHACH
Germany
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
158356
ALCOA FASTENING SYSTEMS
AICHACH GMBH
AICHACH
Germany
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
158356
ALCOA FASTENING SYSTEMS
AICHACH GMBH
AICHACH
Germany
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
136361
136361
ALCOA FORGED PRODUCTS
ALCOA FORGED PRODUCTS
CLEVELAND
CLEVELAND
USA
USA
ABP0-2019
ABP6-5227
NO
NO
3 - QUALIFIED
3 - QUALIFIED
136390
ALCORE BRIGANTINE
ANGLET
France
AIPS03-02-018
YES
3 - QUALIFIED
ONLY FOR : CORE SPLICING + CORE
MACHINING + CORE POTTING + CORE
FORMING
136390
ALCORE BRIGANTINE
ANGLET
France
AIPS06-02-005
YES
3 - QUALIFIED
MACHINING AND SPLACING
136390
ALCORE BRIGANTINE
ANGLET
France
AITM6-3004
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ABP1-1023
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ABP1-2026
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ABP1-2028
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ABP1-5057
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ABP4-1121
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ABP6-5230
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0029
INSTALLATION OF CYLINDRICAL
SHEAR BOLTS
NO_AIRBUS_PI
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0030
STRUCTURAL BOLT TIGHTENING
TORQUES
IPDA71-03
SUPPLY OF FORGINGS
INSPECTION OF ALUMINIUM
FORGINGS
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
MANUFACTURING OF METALLIC
SANDWICH PARTS - BONDING
PROCESS
VISUAL INSPECTION
CHROMIC ACID ANODISING OF
ALUMINIUM
SHOT PEEN FORMING AND
DISTORTION CORRECTION OF METAL
PARTS
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
TESTING BY PENETRANT FLAW
DETECTION
NA
NA
AIPI03-02-018
NOT APPLICABLE
NOT APPLICABLE
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
NONE
MANUFACTURING OF METALLIC
SANDWICH PARTS - BONDING
PROCESS
NOT APPLICABLE
CHROMIC ACID ANODISING OF
ALUMINIUM
SHOT PEEN FORMING AND
DISTORTION CORRECTION OF METAL
PARTS
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NOLA PLANT AND SAINT NAZAIRE
PLANT (OLW ACTIVITIES)
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION (N/A))
TBD
3 - QUALIFIED
NONE
AIPI06-02-005
NA
ABP1-1023
ABP1-2026
ABP1-2028
ABP1-5057
ABP4-1121
NA
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10-STQ-04-IP2-256-A0)
APPL COUPLE SERRAGE
BOULONNERIE STRUCTUR
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0033
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0039
ACCELERATED DRYING OF PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(ARP 02 L)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/06/2015
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0049
ALUMINIUM ALLOYS CHEMICAL
MILLING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF58-01-STQ-04-IP2-256-A0)
NO
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0059
INSPECTION OF PERMANENT AND
REMOVABLE FASTENERS AFTER
INSTALLATION
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(N/A)
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-02-STQ-04-IP2-256-A0)
YES
3 - QUALIFIED
NOT FOR A380 TITANIUM SEAT RAILS
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0078
STRUCTURAL RIVETING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-04 IP2-256-A0)
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-04-IP2-256-A0)
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 76 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0085
INSTALLATION OF TENSION BOLTS
IPDA71-05
POSE DES BOULONS DE TRACTION ET
DES RONDELLES P.L.I. DANS LES
ASSEMBLAGES METALLIQUES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 04/03/2015
NONE
262748
ALENIA AERMACCHI SPA
FOGGIA
Italy
ADET0092
PAINTING FOR DETAIL PARTS IN
COMPOSITE MATERIALS ( EXCEPT
FURNISHING CABIN INTERIOR )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(F-T-SCH-K-78 REV 1)
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0106
REPAIR OF SURFACE DEFECTS ON
AIRCRAFT EXTERIOR SKINS ON
ALUMINIUM
IPDA66-02
REP DEFAUT SUR REVETEMT EXT
AVION EN ALU
YES
3 - QUALIFIED
NOLA PLANT AND SAINT NAZAIRE
PLANT (OLW ACTIVITIES)
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0114
ELECTRICAL BONDING PROCESSES
IPDA83-11
YES
3 - QUALIFIED
TYPE 5 AND TYPE 6
262748
ALENIA AERMACCHI SPA
FOGGIA
Italy
ADET0120
MANUFACTURE OF MONOLITHIC
ELEMENTS IN CARBON PREPREGS
WITH EPOXY RESIN 180°C
NO_AIRBUS_PI
YES
3 - QUALIFIED
NONE
262748
ALENIA AERMACCHI SPA
FOGGIA
Italy
ADET0168
HOT FORMING OF ELEMENTS IN
CARBON PREPREGS WITH EPOXY
RESIN 180°C
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF48-13-STAE-07-IP2-298-A2)
TBD
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
IPDA75-05
INSTALLATION OF TIGHT FIT
BUSHINGS
YES
3 - QUALIFIED
ONLY COLD SHRINK - NOLA PLANT
AND SAINT NAZAIRE PLANT (OLW
ACTIVITIES)
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0175
IPDA62-30
RETOUCHE PROTECTION PAR
CHROMATATION
YES
3 - QUALIFIED
NOLA PLANT AND SAINT NAZAIRE
PLANT (OLW ACTIVITIES)
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0177
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(N/A)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/06/2015
NONE
262748
ALENIA AERMACCHI SPA
FOGGIA
Italy
ADET0177
IPDA37-05
AXIAL DRILLING OF CARBON/METAL
STACKS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/06/2015
ONLY DRILLING AND REAMING IN
CARBON COMPOSITE, WITHOUT
COUNTERSINKING, NO STACKING
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0187
WET INSTALLATION OF FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(ARP07A ED.A REV.3)
TBD
3 - QUALIFIED
NOLA PLANT AND SAINT NAZAIRE
PLANT (OLW ACTIVITIES)
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10-STQ-04-IP2-256-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0029 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS01-02-006
INSTALLATION OF LOCKBOLTS PULL
AND STUMP TYPES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10-STQ-04-IP2-256-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0029 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS01-02-012
MACHINING AND ASSEMBLY OF GLARE
PARTS/ COMPONENTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF72-14-STQ-04-IP2-256-A0)
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10-STQ-04-IP2-256-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0029 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10-STQ-04-IP2-256-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0029 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IPN TCE 01L )
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 09/02/2015
PARTS TO VBE SUBSEQUENTLY
PAINTED
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
ABP1-2028
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2028 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS02-02-005
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
AIPI02-02-005
YES
3 - QUALIFIED
METHOD 1 - 4% EXPANSION
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
262748
ALENIA AERMACCHI SPA
FOGGIA
Italy
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF48-01-STQ-07-IP2-298-A1)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS03-10-001
RECTIFICATION OF METALLIC
MATERIALS BY SHOT PEENING
ABP1-2026
SHOT PEEN FORMING AND
DISTORTION CORRECTION OF METAL
PARTS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2026 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IPN TTE01L ED C REV 4 / N-T-SCH-K02 REV 1 / TTE01M-A REV 2)
YES
3 - QUALIFIED
OVEN: NOLA 1 NOVAC & NOLA 2 F1 &
F2
221422
ALENIA AERMACCHI SPA
Airbus Qualified Special Process List (External Report)
POLVICA DI NOLA
Italy
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
DRILLING, BORING, COUNTERSUNK
FOR CARBON COMPOSITES OR
CARBON COMPOSITES / METALLIC
STACKINKS
DRILLING, BORING,
COUNTERSUNK
FOR CARBON COMPOSITES OR
CARBON COMPOSITES / METALLIC
STACKINKS
GROUNDING & ELECTRICAL BONDING
METHOD
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF48-01-STQ-07-IP2-298-A1)
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
COLD EXPANSION IN METALLIC
MATERIALS SPLIT SLEEVE PROCESS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 77 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
262748
ALENIA AERMACCHI SPA
FOGGIA
Italy
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-05-STQ-05-IP2-298-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-04-IP2-256-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-04-IP2-256-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-04-IP2-256-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS06-01-004
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS06-02-002
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AIPS07-01-017
NO
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AITM6-1001
YES
3 - QUALIFIED
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
AITM6-9004
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
PENETRANT TESTING
INSPECTION FOR CONFIRMATION OF
THE ANODISING PROCESS (BASED
UPON MEASUREMENT OF SURFACE
RESISTANCE)
NA
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
NON STRUCTURAL ADHESIVE
BONDING
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF74-06-STQ-09-IP2-256-A0)
NOT APPLICABLE
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/04/2015
NONE
EN2004-1
Electrical Conductivity
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IPN TESO2M)
YES
3 - QUALIFIED
NONE
DOUBLE TRANSMISSION ULTRASONIC
INSPECTION PROCEDURE (C.SCAN
PROCESS) FOR MULTIPLY CARBON
FABRIC/RESIN SKIN PANELS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
I+D-P-213
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
YES
3 - QUALIFIED
VALID ONLY FOR CHROMIC ACID
ANODIZING 20 V
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
I+D-P-213
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
YES
3 - QUALIFIED
AC7108
ANODIZING-OTHER
AC7108/1
PAINT/DRY FILM COATINGS-OTHER
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
TEST METHODS MUST BE
PERFORMED IN A QUALIFIED
EXTERNAL LAB
I+D-P-416
ALUMINIUM AND ALUMINIUM ALLOY
TARTARIC-SULPHURIC ANODISING
YES
3 - QUALIFIED
NONE
262748
ALENIA AERMACCHI SPA
FOGGIA
Italy
IGC04-25-119
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
IGC04-25-120
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-01-001
251417
251417
ALESTIS AEROSPACE MINANO
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
VITORIA-MINANO
Spain
Spain
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
NON-STRUCTURAL ADHESIVE
BONDING
ASSEMBLY PROCESS OF ADHESIVE
BONDED BRACKETS
INSTRUCTIONS FOR INSPECTIONS BY
ELECTRICAL CONDUCTIVITY (EDDY
CURRENTS)
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
AIPI06-01-004
AIPI06-02-002
NO_AIRBUS_PI
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-02-003
WET BLASTING
I+D-P-074
ABRASIVE CLEANING
YES
3 - QUALIFIED
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-02-003
WET BLASTING
AIPI02-02-003
WET BLASTING
YES
3 - QUALIFIED
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
I+D-P-006
SHOT PEENING
YES
3 - QUALIFIED
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-02-005
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
I+D-P-209
COLD WORKING OF HOLES
YES
3 - QUALIFIED
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
I+D-P-202
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
YES
3 - QUALIFIED
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS03-06-003
LOCKING USING WIRE
I+D-P-373
NO
3 - QUALIFIED
ONLY TYPE I, APPLICATION WITH
BRUSH IN REPAIRS OF DAMAGE AND
BONDING POINTS PROTECTION.
NONE
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
I+D-P-065
NO
3 - QUALIFIED
NONE
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS03-06-014
NO
3 - QUALIFIED
NONE
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS04-01-001
YES
3 - QUALIFIED
NONE
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-358
YES
3 - QUALIFIED
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-064
YES
3 - QUALIFIED
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
I+D-P-358
YES
3 - QUALIFIED
Airbus Qualified Special Process List (External Report)
LOCKING BY SPLIT PIN
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
I+D-P-376
AIPI04-01-001
WIRE LOCKING OF PARTS
FIXING OF MECHANICAL ELEMENTS
WITH ANAEROBIAN RESINS (LOCTITE
TYPE)
LOCKING OF PARTS WITH COTTER
PINS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
PAINTING OF COMPOSITE DETAIL
PARTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
PAINTING OF COMPOSITE DETAIL
PARTS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
ONLY FOR WET BLASTING OF
TITANIUM AND ITS ALLOYS.
NONE
THE PROCESS HAS CHANGED THE
NUMBER DUE TO CHANGES IN AM2253E . THE REPORT 3284-010-02
CORRESPOND TO THE PROCESS 011.
ONLY APPROVED FOR TYPE I, CLASS A
AND HOLE NOMINAL DIAMETERS
BETWEEN 1/4"-19/64"
ONLY ON METALLIC MATERIAL.
AP3089-E
ONLY ON METALLIC MATERIAL.
AP3089-E
ONLY ON METALLIC MATERIAL.
AP3089-E
2015-02-02 - Page 78 of 876
External Shop
Special
Process
Status
YES
3 - QUALIFIED
YES
3 - QUALIFIED
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ONLY ON METALLIC MATERIAL.
AP3089-E
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY FOR METALLIC ASSEMBLIES.
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ALUMINIUM ALLOYS ONLY
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-02-009
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-02-009
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-02-013
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-05-001
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS05-05-003
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
251417
ALESTIS AEROSPACE MINANO
251417
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF ANTI-EROSION PAINT
Ref. No. (PI)
NA
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
ONLY TYPE 1 METODO A
NA
NOT APPLICABLE
NO
3 - QUALIFIED
ONLY FOR THICKNESS > 0,66MM. ONLY
16 TO 60 IACS
I+D-L-113
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
NA
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
ONLY FOR MANUAL TIGHTENING
TORQUE PROCESS
AIPI05-02-009
AIPI05-02-013
AIPI05-05-001
AIPS05-05-004
Spain
AIPS07-01-006
ELECTRICAL BONDING
I+D-P-355
VITORIA-MINANO
Spain
AIPS09-04-001
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AITM6-1001
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AITM6-6004
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AITM6-6006
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
INSPECTION FOR CONFIRMATION OF
THE ANODISING PROCESS (BASED
UPON MEASUREMENT OF SURFACE
RESISTANCE)
PENETRANT INSPECTION PROCESS
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
STRUCTURAL BOLT TIGHTENING
TORQUES
Title (PI)
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF ANTI-EROSION
PAINTS
SEALING OF AIRCRAFT STRUCTURE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
BONDING AND GROUNDING
INSTALLATION
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
NOT APPLICABLE
I+D-P-064
SEALING OF AIRCRAFT STRUCTURE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
PENETRANT TESTING
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
Couple qualification Status
AIPI05-05-003
AIPI05-05-004
AIPI09-04-001
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AITM6-9004
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
I+D-E-137
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
I+D-E-140
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
I+D-L-113
PUERTO REAL
Spain
ADET0030
PUERTO REAL
Spain
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
NONE
PUERTO REAL
Spain
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
I+D-L-113
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
NO
9 - LIMITED SCOPE (AIPS00-00006)
I+D-L-113 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
3 - QUALIFIED
ONLY MANUAL DRILLING. ONLY FOR
STACKS AND DRILLING SEQUENCES
DEFINED, TESTED AND RECORDED IN
QUALIFICATIN DOSSIER. IF NEW
SEQUENCES OR CONFIGURATIONS
ARE USED, ADDITIONAL TESTS HAVE
TO BE PERFORMED.
YES
3 - QUALIFIED
MANUAL DRILLING/DRILLING
SEQUENCES DEFINED AND TESTED
DURING INDUSTRIAL
QUALIFICATION/USE OF NEW
DRILLING TOOLS OR DRILLING
SEQUENCES MUST BE TESTED AND
APPROVED/INSPECTION BASED ON
AITM6-4022 TO BE PERFORMED BY
TRAINED PERSONNEL FROM QUALIED
PLANT
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
294439
294439
294439
294439
294439
294439
294439
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-003
PUERTO REAL
Spain
AIPS01-02-005
PUERTO REAL
Spain
AIPS01-02-008
PUERTO REAL
Spain
AIPS01-02-013
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
AIPI01-02-003
AIPI01-02-005
AIPI01-02-008
AIPI01-02-013
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
YES
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
AIPI01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
YES
3 - QUALIFIED
NONE
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
PUERTO REAL
Spain
AIPS01-02-017
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS01-02-017
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS01-02-017
AIPI01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
294439
294439
294439
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
Airbus Qualified Special Process List (External Report)
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
MIX AND APPLICATION (TYPE 1A+B)
AP3145-E
MIX AND APPLICATION (TYPE 1A+B)
AP3145-E
OWA NOT PERMITTED
2015-02-02 - Page 79 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
I+D-L-113
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
YES
9 - LIMITED SCOPE (AIPS00-00006)
PUERTO REAL
Spain
AIPS01-02-019
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS01-02-022
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
I+D-P-364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
294439
294439
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-019
AIPI01-02-022
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
INSTALLING THREADED CYLINDRICAL
FASTENERS
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-364
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-117
STEEL AND TITANIUM HI-LOK
FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS01-02-026
INSTALLATION OF COLD EXPANDED
MODULAR RETAINERS
AIPI01-02-026
INSTALLATION OF COLD EXPANDED
MODULAR RETAINERS
TBD
3 - QUALIFIED
294439
294439
294439
294439
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
I+D-L-113 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ONLY INSTALLATION FOLLOWING
METHOD B ALLOWED
I+D-P-117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
INSTALLATION OF ABS2151
RETAINERS + ABS2120 +ABS2165
AIPI01-03-002
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTERNERS
WITH ODER WITHOUT ACRES
SLEEVES
YES
3 - QUALIFIED
ONLY INSTALLATION OF
RECEPTACLES EN6092, EN6093 AND
ABS0552 AS INDICATED IN TABLE 1
(CHAPTER 3 OF AIPI01-03-002)
ALLOWED/ NO REMOVAL OF BARREL
AS INDICATED IN CHAPTER 3.4 OF
AIPI01-03-002 ALLOWED/NO REMOVAL
OF RETAINER AS INDICATED IN
CHAPTER 3.7 OF AIPI0
PUERTO REAL
Spain
AIPS01-03-002
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
PUERTO REAL
Spain
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
AIPI01-03-003
INSTALLATION OF INSERTS IN NONMETALLIC
YES
3 - QUALIFIED
NONE
PUERTO REAL
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
LOCAL APPLICATION (TYPE 1) USING
PRETREATMENT AS PER METHOD 2
PUERTO REAL
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
AIPI03-06-009
SHIM FOR ASSEMBLY
YES
3 - QUALIFIED
NONE
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
I+D-P-061
LIQUID SHIMS
YES
9 - LIMITED SCOPE (AIPS00-00006)
I+D-P-061 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
3 - QUALIFIED
ONLY TRIMMING ALLOWED;
ROUGHNESS MEASUREMENT MUST
BE PERFORMED IN A EXTERNAL LAB
QUALIFIED
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
9 - LIMITED SCOPE (AIPS00-00006)
I+D-P-231 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
YES
3 - QUALIFIED
PRODUCTS/MATERIALS USED FOR
REWORK MUST BE PREPARED IN
CLEAN AREA AS PER CHAPTER 6.1. OF
AIPI03-08-003
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS04-01-002
HEAT TREATMENT OF SOLID RIVETS
I+D-L-113
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
YES
9 - LIMITED SCOPE (AIPS00-00006)
PUERTO REAL
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-060
PAINT (GENERAL SPECIFICATION)
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS05-02-002
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS05-02-002
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS05-02-003
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS05-02-003
YES
3 - QUALIFIED
PUERTO REAL
Spain
AIPS05-02-003
YES
3 - QUALIFIED
NONE
PUERTO REAL
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
PUERTO REAL
Spain
AIPS05-02-011
YES
3 - QUALIFIED
NONE
294439
294439
294439
294439
294439
294439
294439
294439
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
Airbus Qualified Special Process List (External Report)
PAINTING OF COMPOSITE DETAIL
PARTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
PAINTING OF COMPOSITE DETAIL
PARTS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
I+D-P-358
I+D-P-064
I+D-P-358
I+D-P-064
AIPI05-02-003
AIPI05-02-009
AIPI05-02-011
I+D-L-113 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
AP3089-E; CASA 1089
NONE
AP3089-E; CASA 1089
NONE
AP3089-E; CASA 1089
NONE
AP3089-E; CASA 1089
NONE
AP3089-E; CASA 1089
AIPI05-02-013
APPLICATION OF ANTI-EROSION
PAINTS
YES
3 - QUALIFIED
LIMITATIONS: ONLY FOR APPLICATION
ON SUBSTRATES OF STRUCTURAL
BASIC PRIMERS APPLIED IAW. AIPS0502-009
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
QUALIFICATION RESTRICTED TO
MANUAL AND SEMKIT MIXING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 80 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
City
Status
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
NOT VALID FOR FUEL TANK
SEALINGI+D-P-146 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
I+D-P-186
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
YES
3 - QUALIFIED
NONE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
LIMITED TO MANUAL AND SEMKIT
MIXING
YES
9 - LIMITED SCOPE (AIPS00-00006)
NOT VALID FOR FUEL TANK
SEALINGI+D-P-146 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
Company Name
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-146
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-003
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-004
294439
ALESTIS AEROSPACE PUERTO
REAL
Spain
Ref. No. (PS)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
ARP-ID
PUERTO REAL
Country
Couple qualification Status
Title (PS)
Ref. No. (PI)
Title (PI)
AIPS05-05-004
WET INSTALLATION OF FASTENERS
I+D-P-146
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
NOT VALID FOR FUEL TANK
SEALINGI+D-P-146 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
AIPI05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
YES
3 - QUALIFIED
NONE
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-005
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
I+D-P-146
APPLICATION OF SEALANTS
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
I+D-P-146
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
NOT VALID FOR FUEL TANK
SEALINGI+D-P-146 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
AIPI05-05-008
APPLICATION OF LOW ADHESION
SEALANT
YES
3 - QUALIFIED
RESTRICTED TO MANUAL AND SEMKIT
MIXING
294439
ALESTIS AEROSPACE PUERTO
REAL
294439
ALESTIS AEROSPACE PUERTO
REAL
294439
294439
294439
294439
294439
294439
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
I+D-P-146
APPLICATION OF SEALANTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
NOT VALID FOR FUEL TANK
SEALINGI+D-P-146 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
MANUFACTURING OF HARNESSES
NOT ALLOWED
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY FOR METALLIC ASSEMBLIES.
I+D-P-355
PUERTO REAL
Spain
AIPS05-05-009
PUERTO REAL
Spain
AIPS05-05-010
PUERTO REAL
Spain
AIPS05-06-001
PUERTO REAL
Spain
AIPS06-01-008
PUERTO REAL
Spain
AIPS06-02-002
PUERTO REAL
Spain
AIPS06-02-009
ADHESIVE TAPE BONDING
AIPI06-02-009
PUERTO REAL
Spain
AIPS07-01-001
MANUFACTURING AND INSTALLATION
OF CABLE HARNESSES
AIPI07-01-001
USE OF SILICONE-BASED SEALANTS
FOR INTERIOR APPLICATION
APPLICATION OF DECORATIVE FILMS
FOR AIRCRAFT EXTERIOR
SURFACE PREPARATION OFL
ADHERENDS FOR SILICONE BASED
AHESIVES / SEALANTS
NON-STRUCTURAL ADHESIVE
BONDING
AIPI05-05-010
AIPI05-06-001
AIPI06-01-008
AIPI06-02-002
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS07-01-003
CABLE TYING WITH NSA935401 OR
NSA8420
AIPI07-01-003
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AIPS07-01-006
ELECTRICAL BONDING
I+D-P-355
ADHESIVE TAPE BONDING
MANUFACTURING AND INSTALLATION
OF CABLE HARNESS
CABLE TYING WITH CABLE TIES
NSA935401 OR LACING TAPES
NSA8420
BONDING AND GROUNDING
INSTALLATION
AIPS07-02-001
GENERAL REQUIREMENTS FOR THE
STRIPPING OF ELECTRICAL CABLES
I+D-P-216
PELADO DE CONDUCTORES Y CABLES
ELECTRICOS PARA GRAPAR O
SOLDAR
YES
3 - QUALIFIED
ONLY APPLICABLE TO SERIAL
PROGRAMMES (NOT TO A380) AND
VALID FOR THE CABLES AND TOOLS
RELATED IN THE QUALIFICATION
REPORT.
I+D-P-216
Spain
AIPS07-07-002
FLEXIBLE TEXTILE SHEATHS EN6049003 TO EN6049-009, ASNE0559 AND
ABS0596 FOR EXTERNAL PROTECTION
OF ELECTRICAL CABLES
AIPI07-07-002
TEXTILE SHEATHS FOR PROTECTION
OF ELECTRICAL CABLES
YES
3 - QUALIFIED
NONE
PUERTO REAL
Spain
AIPS07-07-005
INSTALLATION OF WRAP AROUND
ELECTRICAL SLEEVING EMI
PROTECTION EN4674-003 AND EN4674004
AIPI07-07-005
INSTALLATION OF EMI PROTECTION
SLEEVES EN4674-003 AND EN4674-004
YES
3 - QUALIFIED
ONLY FOR FTI HARNESSES
PUERTO REAL
Spain
AIPS09-04-001
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
AIPI09-04-001
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
YES
3 - QUALIFIED
NONE
294439
ALESTIS AEROSPACE PUERTO
REAL
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
294439
ALESTIS AEROSPACE PUERTO
REAL
294439
ALESTIS AEROSPACE PUERTO
REAL
Airbus Qualified Special Process List (External Report)
USE OF SILICONE-BASED SEALANTS
FOR INTERIOR APPLICATION
APPLICATION OF DECORATIVE FILMS
FOR AIRCRAFT EXTERIOR
SURFACE PREPARATION OF
ADHERENDS FOR SILICONE BASED
ADHESIVES/SEALANTS
NON STRUCTURAL ADHESIVE
BONDING
PUERTO REAL
Spain
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 81 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AITM6-3004
VISUAL INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AITM6-6006
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
294439
ALESTIS AEROSPACE PUERTO
REAL
PUERTO REAL
Spain
AITM6-9008
NA
NOT APPLICABLE
YES
3 - QUALIFIED
METHODS M1 AND M2
PUERTO REAL
Spain
I+D-L-113
I+D-L-113
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
NA
3 - QUALIFIED
NONE
PUERTO REAL
Spain
I+D-P-061
LIQUID SHIMS
I+D-P-061
LIQUID SHIMS
YES
3 - QUALIFIED
NONE
PUERTO REAL
Spain
I+D-P-117
STEEL AND TITANIUM HI-LOK
FASTENERS
I+D-P-117
STEEL AND TITANIUM HI-LOK
FASTENERS
TBD
3 - QUALIFIED
NONE
PUERTO REAL
Spain
I+D-P-146
APPLICATION OF SEALANTS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NOT VALID FOR FUEL TANK SEALING
PUERTO REAL
Spain
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
NONE
PUERTO REAL
Spain
I+D-P-387
MACHINING COMPOSITES
I+D-P-387
MACHINING COMPOSITES
TBD
3 - QUALIFIED
NONE
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
AIPI03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
294439
294439
294439
294439
294439
294439
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ALESTIS AEROSPACE PUERTO
REAL
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS03-02-018
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS03-02-019
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS03-07-002
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS03-07-007
MANUFACTURING OF STRUCTURAL
COMPONENTS FROM
THERMOSETTING PREPREG
MATERIALS
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
193701
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
AIPI03-02-019
AIPI03-07-002
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
METAL BONDING (AS7118/2)
PREPREG/ADHESIVE BONDING
(AS7118/1)
AP3222-E
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
YES
3 - QUALIFIED
NONE
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-064
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-358
PAINTING OF COMPOSITE DETAIL
PARTS
YES
3 - QUALIFIED
NONE
AP3089-E
SEVILLA
Spain
AIPS05-02-009
I+D-P-060
PAINT (GENERAL SPECIFICATION)
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
AIPS05-02-009
I+D-P-358
PAINTING OF COMPOSITE DETAIL
PARTS
YES
3 - QUALIFIED
NONE
NONE
AP3089-E
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
I+D-P-064
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
YES
3 - QUALIFIED
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
MIX AND APPLICATION (TYPE 1A+B)
AP3145-E
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NO CAPACITIVE IMPEDANCE
MEASUREMENT (AITM6-9006)
ALLOWED
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AIPS06-01-004
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
AIPI06-01-004
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
YES
3 - QUALIFIED
NONE
193701
193701
193701
193701
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
Airbus Qualified Special Process List (External Report)
SEVILLA
Spain
AIPS06-02-008
BONDING OF ACOUSTIC SKIN ON
HONEYCOMB WITH RETICULATED
ADHESIVE
AIPI06-02-008
BONDING OF ACOUSTIC SKIN ON
HONEYCOMB WITH RETICULATED
ADHESIVE
YES
3 - QUALIFIED
MANUAL MODE, ONLY FOR PARTS
DETAILED IN CMR-21282203.
ACOUSTIC TEST SPECIMENS
(FOLLOWING ME0609510), CLIMBING
DRUM PEEL TEST SPECIMENS (IN
ACCORDANCE WITH STANDARD EN
2243-3) AND 4 POINTS-BENDING
ACCORDING TO AITM1-0018 NOT
ALLOWED (NOT REQUESTED IN CMR/
SEVILLA
Spain
AIPS06-02-009
ADHESIVE TAPE BONDING
AIPI06-02-009
ADHESIVE TAPE BONDING
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
AITM6-3004
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
AITM6-4005
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
SEVILLA
Spain
AITM6-5003
VISUAL INSPECTION
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
TAP TEST
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 82 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
193701
ALESTIS AEROSPACE S L SAN
PABLO PLANT
SEVILLA
Spain
AITM6-6006
SEVILLA
Spain
AITM6-9003
SEVILLA
Spain
I+D-E-275
SEVILLA
Spain
I+D-E-280
SEVILLA
Spain
I+D-E-282
SEVILLA
Spain
I+D-E-294
SEVILLA
Spain
I+D-E-296
SEVILLA
Spain
I+D-E-336
SEVILLA
Spain
I+D-E-383
193701
193701
193701
193701
193701
193701
193701
193701
203583
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE S L SAN
PABLO PLANT
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
Title (PS)
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
LEAK TEST FOR SANDWICH
STRUCTURES
NON - DESTRUCTIVE INSPECTION OF
CARBON FIBER COMPOSITE PARTS
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
TAP TESTING ON BONDED ELEMENTS
AND / OR COMPOSITE STRUCTURES
EVALUATION OF ULTRASONIC
TRANSDUCERS
LEAK TESTING IN SANDWICH
STRUCTURES
EVALUATION OF ULTRASONIC
INSPECTION EQUIPMENTS AND
FACILITIES
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
Couple qualification Status
Ref. No. (PI)
Title (PI)
Special
Process
Status
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AP5121
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AP5121
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AP5121
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AP3141-E
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AIPI01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
3 - QUALIFIED
RESTRICTED FOR MANUAL DRILLING.
NEW DRILLING TOOLS/SEQUENCES (IF
ANY) SHOULD BE TESTED AND
APPROVED.
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
RESTRICTED FOR MANUAL DRILLING.
NEW DRILLING TOOLS/SEQUENCES (IF
ANY) SHOULD BE TESTED AND
APPROVED. IF NEEDED, INSPECTION
BASED ON AITM6-4022 MUST BE
PERFORMED BY A QUALIFIED PLANT.
YES
3 - QUALIFIED
ONLY VALID FOR HANDLE
APPLICATION
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY FOR INSTALLATION OF FOR
STANDARD FASTENERS/POINT DRIVE
FASTENERS AND TENSION BOLTS
TBD
3 - QUALIFIED
ONLY FOR INSTALLATION OF
MODULAR RETAINERS ABS2151 IN
COMBINATION WITH ABS2120 AND
ABS2165.
YES
3 - QUALIFIED
ONLY FOR INSTALLATION OF
RECEPTACLES
EN6092/EN6093/ABS0552
YES
3 - QUALIFIED
NO VALID FOR METALIC CORE
YES
3 - QUALIFIED
NONE
VALID ONLY FOR THE MIXTURE AND
APPLICATION OF RESIN Z18.170
ACCORDING TO TABLE 5, ITEM 15,
METHOD (1A) OF THE STANDARD I+DP-233
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-005
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-008
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-013
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-015
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-017
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-017
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-364
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-022
INSTALLING THREADED CYLINDRICAL
FASTENERS
INSTALLATION OF COLD EXPANDED
MODULAR RETAINERS
AIPI01-02-026
INSTALLATION OF COLD EXPANDED
MODULAR RETAINERS
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-02-026
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-03-002
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-03-003
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS01-03-003
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
INSTALLATION OF BLIND BOLTS
THREADED TYPE
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
INSTALLATION OF INSERTS IN NON
METALLICS
INSTALLATION OF INSERTS IN NON
METALLICS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
AIPI01-02-008
AIPI01-02-013
AIPI01-02-015
I+D-P-231
AIPI01-02-017
AIPI01-03-002
I+D-P-177
AIPI01-03-003
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
INSTALLATION OF BLIND BOLTS
THREADED TYPE
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTERNERS
WITH ODER WITHOUT ACRES
SLEEVES
INSTALLATION OF SHUR-LOK INSERTS
IN SANDWICH PARTS
INSTALLATION OF INSERTS IN NONMETALLIC
YES
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
I+D-P-061
LIQUID SHIMS
YES
3 - QUALIFIED
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS03-06-009
AIPI03-06-009
3 - QUALIFIED
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-02-003
YES
3 - QUALIFIED
NONE
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-02-009
YES
3 - QUALIFIED
NONE
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-02-013
YES
3 - QUALIFIED
NONE
203583
203583
ALESTIS AEROSPACE SL
ALESTIS AEROSPACE SL
LA RINCONADA
LA RINCONADA
Spain
Spain
AIPS05-02-013
AIPS05-05-001
APPLICATION OF ANTI-EROSION PAINT
SEALING OF AIRCRAFT STRUCTURE
I+D-P-313
AIPI05-05-001
SHIM FOR ASSEMBLY
APPLICATION OF EXTERNAL PAINT
SYSTEMS
PAINTING OF COMPOSITE DETAIL
PARTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF ANTI-EROSION
PAINTS
EROSION RESISTANT PAINT SYSTEM
SEALING OF AIRCRAFT STRUCTURE
YES
203583
SHIMMING FOR ASSEMBLY
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF ANTI-EROSION PAINT
ONLY VALID ROOM TEMPERTURE
CURING
NONE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
MANUAL MIXING < 0.5KG
Airbus Qualified Special Process List (External Report)
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
AIPI05-02-003
I+D-P-358
AIPI05-02-009
AIPI05-02-013
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 83 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
I+D-P-186
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
YES
3 - QUALIFIED
NONE
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-05-003
YES
3 - QUALIFIED
NONE
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-05-004
YES
3 - QUALIFIED
NONE
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-05-006
YES
3 - QUALIFIED
NONE
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-05-008
YES
3 - QUALIFIED
ONLY MANUAL MIXING
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NO VALID FOR TUBES AND PIPES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
APPLICATION OF LOW ADHESION
SEALANTS
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS06-01-004
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS06-01-004
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS06-02-002
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS06-02-002
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS07-01-006
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS09-04-001
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AIPS09-04-001
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AITM6-3004
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AITM6-6006
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
AITM6-9008
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
I+D-P-060
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
I+D-P-064
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
NON-STRUCTURAL ADHESIVE
BONDING
NON-STRUCTURAL ADHESIVE
BONDING
ELECTRICAL BONDING
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
VISUAL INSPECTION
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
PAINT (GENERAL SPECIFICATION)
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
AIPI05-05-003
AIPI05-05-004
AIPI05-05-006
AIPI05-05-008
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
APPLICATION OF LOW ADHESION
SEALANT
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
I+D-P-067
SURFACE PREPARATION FOR NONSTRUCTURAL BONDINGS
NA
MECHANICAL SURFACE PREPARATION
OF NON-STRUCTURAL ADHEREND
PRIOR TO ADHESIVE BONDING
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
NON STRUCTURAL ADHESIVE
BONDING
BONDING AND GROUNDING
INSTALLATION
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
PAINTING OF COMPOSITE DETAIL
PARTS
NOT APPLICABLE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
I+D-P-060
PAINT (GENERAL SPECIFICATION)
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
AIPI06-01-004
I+D-P-071
AIPI06-02-002
I+D-P-355
AIPI09-04-001
I+D-P-358
I+D-P-064
203583
ALESTIS AEROSPACE SL
LA RINCONADA
Spain
I+D-P-146
APPLICATION OF SEALANTS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
ONLY VALID TYPE 1A+B, ONLY VALID
FOR SEALANT TYPE B, IN QUANTITY
BELOW 500ML AND IT WILL BE
NECESARY AUTHORIZATION OF
QUALITY DEPARTMENT
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
NO
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-364
YES
3 - QUALIFIED
NONE
PUERTO SANTA MARIA
Spain
AIPS01-02-022
YES
3 - QUALIFIED
NONE
PUERTO SANTA MARIA
Spain
AIPS01-02-022
YES
3 - QUALIFIED
NONE
248023
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
I+D-P-231
I+D-P-117
INSTALACIÓN DE REMACHES LIGEROS
DE ROSCA CORTA, NO MÉTRICOS "HILITE / VERI-LITE"
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
STEEL AND TITANIUM HI-LOK
FASTENERS
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS03-06-003
LOCKING USING WIRE
I+D-P-373
WIRE LOCKING OF PARTS
NO
3 - QUALIFIED
ONLY METHOD 2 ACCORDING TO
AIPS03-06-014 IS APPROVED.
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
I+D-P-065
FIXING OF MECHANICAL ELEMENTS
WITH ANAEROBIAN RESINS (LOCTITE
TYPE)
NO
3 - QUALIFIED
ONLY METHOD 2 ACCORDING TO
AIPS03-06-014 IS APPROVED.
PUERTO SANTA MARIA
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
I+D-P-061
LIQUID SHIMS
YES
3 - QUALIFIED
NONE
PUERTO SANTA MARIA
Spain
AIPS03-06-014
LOCKING BY SPLIT PIN
I+D-P-376
LOCKING OF PARTS WITH COTTER
PINS
NO
3 - QUALIFIED
ONLY METHOD 2 ACCORDING TO
AIPS03-06-014 IS APPROVED.
248023
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 84 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
I+D-P-387
MACHINING COMPOSITES
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
I+D-P-233
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
AIPI05-02-013
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
I+D-P-186
SEALANT PROTECTION AGAINST
PROJECTIONS OF HYDRAULIC FLUIDS
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
ONLY APPLICABLE FOR RIVETING OF
ELEMENTS THROUGH AIPS/AIPI01-01004 AND AIPS/AIPI01-02-013.
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AIPS07-01-006
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
AITM6-9008
248023
ALESTIS AEROSPACE
TECNOBAHIA MONTAJ
PUERTO SANTA MARIA
Spain
I+D-L-113
302343
ALESTIS DO BRASIL PLANTA 2
Brazil
AIPS03-07-002
302343
ALESTIS DO BRASIL PLANTA 2
Brazil
AIPS03-07-002
302343
ALESTIS DO BRASIL PLANTA 2
Brazil
AIPS05-02-009
302343
ALESTIS DO BRASIL PLANTA 2
SAN JOSE DOS
CAMPOS
Brazil
AITM6-6006
302343
ALESTIS DO BRASIL PLANTA 2
SAN JOSE DOS
CAMPOS
Brazil
I+D-E-280
302343
ALESTIS DO BRASIL PLANTA 2
SAN JOSE DOS
CAMPOS
Brazil
I+D-E-282
302343
ALESTIS DO BRASIL PLANTA 2
SAN JOSE DOS
CAMPOS
Brazil
I+D-E-338
REFLECTOR - PLATE ULTRASONIC
INSPECTION OF CARBON FIBER
COMPOSITE ELEMENTS
302343
ALESTIS DO BRASIL PLANTA 2
SAN JOSE DOS
CAMPOS
Brazil
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS01-02-013
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS01-02-015
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS01-02-017
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS01-03-002
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS01-03-003
SAN JOSE DOS
CAMPOS
SAN JOSE DOS
CAMPOS
SAN JOSE DOS
CAMPOS
ELECTRICAL BONDING
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
APPLICATION OF STRUCTURAL
PAINTS
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
INSTALLATION OF BLIND BOLTS
THREADED TYPE
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
INSTALLATION OF INSERTS IN NON
METALLICS
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
APPLICATION OF ANTI-EROSION
PAINTS
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
SURFACE PREPARATION WITH LASER
AS INDICATED IN CHAPTER 2.2 OF
AIPI07-01-006. BONDING ON PIPES NOT
ALLOWED.
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
I+D-L-113
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
NA
3 - QUALIFIED
NONE
I+D-P-387
MACHINING COMPOSITES
YES
3 - QUALIFIED
ONLY VALID HANDLE TRIMMING
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 28/02/2015
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
QCS131093
NO
3 - QUALIFIED
QCS131094
YES
3 - QUALIFIED
THIS QUALIFICATION DO NOT COVER,
CORE MACHINING, HOT FORMING AND
AUTOMATIC LAY-UP MANCHINES,
PROCESSES.
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
OWA NOT PERMITTED
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
YES
3 - QUALIFIED
ONLY LOCAL TYPE I & II APPLICATIONS
PERMITTED (ALODINE PEN
EXCLUDED) / CLEANING FOLLOWING
METHOD 2
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
YES
3 - QUALIFIED
YES
3 - QUALIFIED
I+D-P-231
I+D-P-358
NA
I+D-E-280
I+D-E-282
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
PAINTING OF COMPOSITE DETAIL
PARTS
NOT APPLICABLE
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
I+D-E-338
REFLECTOR - PLATE ULTRASONIC
INSPECTION OF CARBON FIBER
COMPOSITE ELEMENTS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
AIPI01-02-013
AIPI01-02-015
AIPI01-02-017
AIPI01-03-002
AIPI01-03-003
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS03-06-009
SHIMMING FOR ASSEMBLY
AIPI03-06-009
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
297661
ALESTIS JUNDIZ
Airbus Qualified Special Process List (External Report)
VITORIA GASTEIZ
Spain
INSTALLATION OF BLIND BOLTS PULLTYPE
INSTALLATION OF BLIND BOLTS
THREADED TYPE
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTERNERS
WITH ODER WITHOUT ACRES
SLEEVES
INSTALLATION OF INSERTS IN NONMETALLIC
CHEMICAL CONVERSION COATING
SHIM FOR ASSEMBLY
PAINT SYSTEMS FOR METALLIC
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-064
DETAIL PARTS AND ASSEMBLIES
PAINTING OF COMPOSITE DETAIL
AIPS05-01-001
APPLICATION OF BASIC PRIMER
I+D-P-358
PARTS
APPLICATION OF STRUCTURAL
PAINTING OF COMPOSITE DETAIL
AIPS05-02-009
I+D-P-358
PAINTS
PARTS
APPLICATION OF STRUCTURAL
PAINT SYSTEMS FOR METALLIC
AIPS05-02-009
I+D-P-064
PAINTS
DETAIL PARTS AND ASSEMBLIES
APPLICATION OF STRUCTURAL
APPLICATION OF STRUCTURAL
AIPS05-02-009
AIPI05-02-009
PAINTS ON METALLIC
PAINTS ON METALLIC
REWORK OF PAINTS
REWORK OF PAINTS
AIPS05-02-011
AIPI05-02-011
AND NON-METALLIC STRUCTURAL
AND NON-METALLIC STRUCTURAL
PARTS
PARTS
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
N/A
REWORK ONLY ALLOWED ON CFRP
AND AL ALLOYS SUBSTRATES.
MANUAL MIXING
2015-02-02 - Page 85 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS05-05-003
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS05-05-004
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS05-05-008
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS05-05-009
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
APPLICATION OF LOW ADHESION
SEALANTS
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
Ref. No. (PI)
AIPI05-05-003
AIPI05-05-004
AIPI05-05-008
AIPI05-05-009
Couple qualification Status
Title (PI)
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
WET INSTALLATION OF FASTENERS
APPLICATION OF LOW ADHESION
SEALANT
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
Special
Process
Status
YES
3 - QUALIFIED
N/A
YES
3 - QUALIFIED
MANUAL MIXING
YES
3 - QUALIFIED
MANUAL MIXING
YES
3 - QUALIFIED
NONE
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
I+D-P-71
NON - STRUCTURAL BONDINGS (
GENERAL SPECIFICATION )
YES
3 - QUALIFIED
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
AIPI06-02-002
NON STRUCTURAL ADHESIVE
BONDING
YES
3 - QUALIFIED
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS06-02-002
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS07-01-006
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AIPS09-04-001
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AITM6-6006
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
AITM6-9008
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
Spain
I+D-L-113
297661
297661
ALESTIS JUNDIZ
VITORIA GASTEIZ
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
SURFACE PREPARATION FOR NONSTRUCTURAL BONDINGS
I+D-P-067
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
ONLY FOR BONDING OF METALLIC
PARTS IN ASSEMBLIES (LASER
METHOD EXCLUDED). FINAL BONDING
PROTECTION AND MARKING NOT
PERMITTED (AITM6-9008 NOT
QUALIFIED)
AIPI09-04-001
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
METHODS M1 AND M2 ONLY
I+D-L-113
ALUMINIUM ALLOY AND NIOBIUM
TITANIUM ALLOY SOLID SHANK RIVETS
NA
3 - QUALIFIED
NONE
3 - QUALIFIED
Sólo para el uso de adhesivos con Tª de
almacenamiento permitida >15º. Válido
sólo para encolados que no requieran
ensayos de tap test según AITM6-5003 ni
resonancia AITM6-5002.
I+D-P-067
SURFACE PREPARATION FOR NONSTRUCTURAL BONDINGS
NO
I+D-P-071
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
I+D-P-071
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
NA
3 - QUALIFIED
Spain
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
3 - QUALIFIED
NONE
Spain
AITM6-3004
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
Spain
AITM6-4005
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS111032
PUERTO DE SANTA
MARIA
Spain
AITM6-4014
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
ALESTIS TECNOBAHIA
COMPOSITES
PUERTO DE SANTA
MARIA
Spain
AITM6-4014
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
ALESTIS TECNOBAHIA
COMPOSITES
PUERTO DE SANTA
MARIA
Spain
AITM6-4022
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS130713 AND LAMINATE MATERIAL
ALESTIS TECNOBAHIA
COMPOSITES
ALESTIS TECNOBAHIA
COMPOSITES
ALESTIS TECNOBAHIA
COMPOSITES
PUERTO DE SANTA
MARIA
PUERTO DE SANTA
MARIA
PUERTO DE SANTA
MARIA
297551
ALESTIS TECNOBAHIA
COMPOSITES
297551
297551
297551
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
YES
VALID ONLY FOR THE USE OF
ADHESIVES WITH PERMISSIBLE
STORAGE TEMPERATURE GREATER
9 - LIMITED SCOPE (AIPS00-00THAN 15 DEGREES.I+D-P-071 SCOPE
006)
& LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
Spain
VITORIA GASTEIZ
297551
ELECTRICAL BONDING
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
I+D-P-071
VALID ONLY FOR THE USE OF
ADHESIVE WITH PERMISSIBLE
STORAGE GREATER THAN 18
DEGREE. I+P-D0071 SCOPE &
LIMITATION (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE4.1
- ONLY APPLICABLE FOR BONDING OF
INSERTS IN COMPOSITES AS PER AIPI
01-03-003.
- NOT APPLICABLE TO ADHESIVES
WHICH MUST BE STORED UNDER 15ºC
- NOT APPLICABLE TO ADHESIVES
WHICH MUST BE CURED AT
TEMPERATURE ABOVE 100ºC OR WITH
AUTOCLAVE PRESSURE
- AITM6-
Sólo para el uso de adhesivos con Tª de
almacenamiento permitida >15º. Válido
sólo para encolados que no requieran
ensayos de tap test según AITM6-5003 ni
resonancia AITM6-5002.
ALESTIS JUNDIZ
297551
Spain
NON-STRUCTURAL ADHESIVE
BONDING
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Airbus Qualified Special Process List (External Report)
VISUAL INSPECTION
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
THICKNESS MEASUREMENT OF FIBER
COMPOSITES BY ULTRASONIC PULSEECHO TECHNIQUE
THICKNESS MEASUREMENT OF FIBER
COMPOSITES BY ULTRASONIC PULSEECHO TECHNIQUE
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 86 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Title (PI)
Special
Process
Status
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NA
NOT APPLICABLE
YES
3 - QUALIFIED
LIMITED TO ALFA PRECISION CASTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
LIMITED TO ALFA PRECISION CASTING
AIPI09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
RESTRICTED TO TITANIUM ALLOYS
PARTS
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
INSTALLATION OF ANCHOR NUTS
YES
3 - QUALIFIED
NONE
INSTALLATION OF FASTENERS AND
NUTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
SELF - LOCKING NUTS
TBD
3 - QUALIFIED
NONE
TIGHTENING OF SCREWS AND NUTS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
INSTALLATION OF HI-LOKS
YES
3 - QUALIFIED
NONE
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
3 - QUALIFIED
NONE
80-T-34-9000
BONDING OF STRUCTURES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
Company Name
City
Country
Ref. No. (PS)
297551
ALESTIS TECNOBAHIA
COMPOSITES
PUERTO DE SANTA
MARIA
Spain
AITM6-6006
PUERTO DE SANTA
MARIA
EIBAR
Spain
I+D-E-280
300726
ALESTIS TECNOBAHIA
COMPOSITES
ALFA IDEI AIE
Spain
AITM6-1001
300726
ALFA IDEI AIE
EIBAR
Spain
AITM6-7002
303686
ALISAERO
SAINT GERME
France
AIPS09-02-005
303686
ALISAERO
SAINT GERME
France
AITM6-1001
303686
ALISAERO
SAINT GERME
France
AITM6-7002
BERNE
Germany
80-T-30-4010
BERNE
Germany
80-T-30-6918
BERNE
Germany
80-T-30-6919
BERNE
Germany
80-T-30-9910
BERNE
Germany
80-T-32-1000
BERNE
Germany
80-T-32-2321
BERNE
Germany
80-T-33-3010
BERNE
Germany
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
80-T-34-3000
BERNE
Germany
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
80-T-34-3001
BERNE
Germany
80-T-34-3002
BERNE
Germany
80-T-34-3006
BERNE
Germany
80-T-34-3016
SELF - LOCKING NUTS
80-T-34-3016
BERNE
Germany
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
80-T-34-3050
BERNE
Germany
80-T-34-3700
BERNE
Germany
80-T-34-5661
BERNE
Germany
80-T-34-5803
BERNE
Germany
80-T-34-5804
BERNE
Germany
80-T-34-5807
BERNE
Germany
80-T-34-5814
BERNE
Germany
80-T-34-5815
INSTALLATION OF HI-LOKS
80-T-34-5815
BERNE
Germany
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
BERNE
Germany
80-T-34-9000
BONDING OF STRUCTURES
BERNE
Germany
80-T-34-9032
BERNE
Germany
80-T-34-9600
BERNE
Germany
80-T-34-9604
BERNE
Germany
80-T-35-0014
BERNE
Germany
80-T-35-0019
BERNE
Germany
80-T-35-0130
BERNE
Germany
80-T-35-0131
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
Airbus Qualified Special Process List (External Report)
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
PENETRANT TESTING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
PICKLING OF TITANIUM AND ITS
ALLOYS
PENETRANT TESTING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
VIBRATORY GRINDING
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
DIMPLING OF SHEETS FOR
ATTACHING PARTS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
INSTALLATION OF ROSAN THREADED
INSERTS
IDENTIFICATION OF TORQUETIGHTENED SCREWED CONNECTIONS
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
WET INSTALLATION OF FASTENERS
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
INSTALLATION OF TITANIUM - NIOBIUM
SOLID RIVETS
INSTALLATION OF SOLID ALUMINUM
RIVETS
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
APPLICATION OF SILICONE - BASED
SEALANTS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH EMULSION CLEANING
AGENTS
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
PRETREATMENT OF POLYAMIDE FOR
BONDING
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
ARP-ID
297551
Title (PS)
Couple qualification Status
80-T-30-4010
80-T-30-6918
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
80-T-30-6919
80-T-30-9910
80-T-32-1000
80-T-32-2321
80-T-33-3010
80-T-34-3002
80-T-34-3006
80-T-34-3700
80-T-34-5661
80-T-34-5803
80-T-34-5804
80-T-34-5807
80-T-34-5814
80-T-34-9032
80-T-34-9600
80-T-34-9604
80-T-35-0014
80-T-35-0019
80-T-35-0130
80-T-35-0131
VIBRATORY GRINDING
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
DIMPLING OF SHEETS FOR
ATTACHING PARTS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
INSTALLATION OF ROSAN THREADED
INSERTS
IDENTIFICATION OF TORQUETIGHTENED SCREWED CONNECTIONS
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
WET INSTALLATION OF FASTENERS
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
INSTALLATION OF TITANIUM - NIOBIUM
SOLID RIVETS
INSTALLATION OF SOLID ALUMINUM
RIVETS
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
APPLICATION OF SILICONE - BASED
SEALANTS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
CLEANING WITH EMULSION CLEANING
AGENTS
PRETREATMENT OF NONSTRUCTURAL JOINTS FOR BONDING
PRETREATMENT OF POLYAMIDE FOR
BONDING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NONE
2015-02-02 - Page 87 of 876
External Shop
ARP-ID
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
Company Name
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
BERNE
Germany
80-T-35-5000
COATING WITH WASH PRIMER
80-T-35-5000
COATING WITH WASH PRIMER
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5001
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5002
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5008
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5023
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5025
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5030
TBD
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5101
TBD
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5106
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5212
TBD
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5218
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5254
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
YES
3 - QUALIFIED
NONE
COATING WITH SYNTHETIC RESIN
PRIMER CONTAINING ZINC CHROMATE
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO - COMPONENT
POLYURETHANE PRIMER
COATING WITH TWO¿COMPONENT
EP¿BASED PRIMER,CHROMATE¿FREE
COATING WITH TWO - COMPONENT
PRIMER CHROMATE - FREE
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO-COMPONENT EPBASED TOP VARNISH
COATING WITH PUR - BASED TOP
COAT
COATING WITH ANTI - SLIP PAINT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
COATING WITH PUR-BASED VARNISH
ABRASION-RESISTANT
80-T-35-5001
80-T-35-5002
80-T-35-5008
80-T-35-5023
80-T-35-5025
80-T-35-5030
80-T-35-5101
80-T-35-5106
COATING WITH SYNTHETIC RESIN
PRIMER CONTAINING ZINC CHROMATE
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO - COMPONENT
POLYURETHANE PRIMER
COATING WITH TWO¿COMPONENT
EP¿BASED PRIMER,CHROMATE¿FREE
COATING WITH TWO - COMPONENT
PRIMER CHROMATE - FREE
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO-COMPONENT EPBASED TOP VARNISH
COATING WITH PUR - BASED TOP
COAT
80-T-35-5212
80-T-35-5218
80-T-35-5254
COATING WITH ANTI - SLIP PAINT
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
COATING WITH PUR-BASED VARNISH
ABRASION-RESISTANT
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
80-T-35-5903
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
80-T-35-5903
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
YES
3 - QUALIFIED
NONE
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
80-T-35-5904
ASSEMBLY WITH DUROPLASTIC ANTICORROSION COMPOUND, CHROMATEFREE
80-T-35-5904
ASSEMBLY WITH DUROPLASTIC ANTICORROSION COMPOUND, CHROMATEFREE
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-9023
PRESERVATION OF RIVET ROWS
80-T-35-9023
PRESERVATION OF RIVET ROWS
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-9023
PRESERVATION OF RIVET ROWS
80-T-35-9023
PRESERVATION OF RIVET ROWS
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-9120
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-9123
TBD
3 - qualified
none
BERNE
Germany
80-T-35-9124
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-9125
REMOVAL OF ORGANIC COATINGS
80-T-35-9125
REMOVAL OF ORGANIC COATINGS
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-35-9127
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
80-T-35-9127
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
OVEN # 1 LIMITED TO SHEET
THICKNESSES OF > 0,5 MM
BERNE
Germany
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
NONE
BERNE
Germany
80-T-39-0230
YES
3 - QUALIFIED
NONE
BERNE
Germany
80-T-39-0501
TBD
3 - QUALIFIED
NONE
BERNE
Germany
80-T-40-3312
NO
3 - QUALIFIED
NONE
BERNE
Germany
AIPS01-02-003
YES
3 - QUALIFIED
NOT VALID FOR MATERIAL >=3,2 MM
AND AUTOMATIC DRILLING.
BERNE
Germany
AIPS01-02-013
YES
3 - QUALIFIED
NONE
BERNE
Germany
AIPS01-04-001
BERNE
Germany
AIPS01-04-008
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
COATING WITH PAINTS AND
VARNISHES, GENERAL
PAINT COATING IN INTERIOR
FURNISHING
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
PREVENTION OF CORROSION DURING
PRODUCTION
ELECTRICAL BONDING
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
AIPS03-10-011
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
AIPS04-01-001
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
AIPS05-05-003
Airbus Qualified Special Process List (External Report)
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
GENERAL REQUIREMENTS FOR
WELDING AND ALLIED PROCESSES
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
HARD METAL FORMING - GENERAL
REQUIREMENTS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
COATING WITH PAINTS AND
VARNISHES, GENERAL
PAINT COATING IN INTERIOR
FURNISHING
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-9120
80-T-35-9123
80-T-35-9124
80-T-39-0230
80-T-39-0501
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
PREVENTION OF CORROSION DURING
PRODUCTION
80-T-40-3312
AIPI01-02-003
AIPI01-02-013
ELECTRICAL BONDING
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
INSTALLATION OF BLIND BOLTS PULLTYPE
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
NONE
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
ONLY VALID FOR MANUAL WELDING
NO
3 - QUALIFIED
APPROVAL ONLY FOR 1.4544 AND HTZ
M533-78601-000-XX
YES
3 - QUALIFIED
NO
YES
3 - QUALIFIED
NONE
NO_AIRBUS_PI
AIPI04-01-001
AIPI05-05-003
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
2015-02-02 - Page 88 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
80-T-40-3312
ELECTRICAL BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
none
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NO
3 - qualified
none
NO
3 - qualified
none
Company Name
City
Country
Ref. No. (PS)
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
AIPS06-01-008
BERNE
Germany
AIPS06-02-002
BERNE
Germany
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
BERNE
Germany
AIPS07-01-006
ELECTRICAL BONDING
QVA-Z10-50-01
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
136537
136537
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
SURFACE PREPARATION OFL
ADHERENDS FOR SILICONE BASED
AHESIVES / SEALANTS
NON-STRUCTURAL ADHESIVE
BONDING
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
PENETRANT INSPECTION CANCELLED AND REPLACED BY AITM
6-1001
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
QVA-Z10-50-01
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
QVA-Z10-55-00
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
QVA-Z10-57-00
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
QVA-Z10-57-00
136537
ALJO ALUMINIUM BAU
JONUSCHEIT GMBH
BERNE
Germany
QVA-Z10-57-00
240871
ALL METALS PROCESSING
STANTON
USA
ABP1-1023
240871
ALL METALS PROCESSING
STANTON
USA
ABP1-2344
240871
ALL METALS PROCESSING
STANTON
USA
ABP1-3334
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-1121
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-1123
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-1352
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2124
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2125
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
240871
ALL METALS PROCESSING
STANTON
USA
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
CHROMIC ACID ANODISING OF
ALUMINIUM
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
DEPOSITION OF TITANIUM NITRIDE BY
PHYSICAL VAPOUR DEPOSITION (PVD)
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
ARP-ID
136537
Title (PS)
Couple qualification Status
Ref. No. (PI)
AIPI06-01-008
AIPI06-02-002
QVA-Z10-50-01
QVA-Z10-55-00
Title (PI)
SURFACE PREPARATION OF
ADHERENDS FOR SILICONE BASED
ADHESIVES/SEALANTS
NON STRUCTURAL ADHESIVE
BONDING
MEASUREMENT OF ELECTRIC
CONDUCTIVITY OF NONFERROMAGNETIC CONDUCTORS BY
EDDY CURRENT - CANCELLED AND
REPLACED BY AITM 6-6004
PENETRANT INSPECTION CANCELLED AND REPLACED BY AITM
6-1001
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QVA-Z10-57-00
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
NO
3 - qualified
none
NO
3 - qualified
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
QVA-Z10-57-00
ABP1-1023
ABP1-2344
ABP1-3334
ABP4-1121
ABP4-1123
ABP4-1352
ABP4-2124
ABP4-2125
INSPECTION FOR GREASE-FREE
METAL SURFACES (BROCKMANNFRIEDRICH TEST)
CHROMIC ACID ANODISING OF
ALUMINIUM
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
DEPOSITION OF TITANIUM NITRIDE BY
PHYSICAL VAPOUR DEPOSITION (PVD)
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2128
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2130
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2131
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2133
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2361
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-3135
APPLICATION OF FILLER TO SMALL
HOLES
ABP4-3135
APPLICATION OF FILLER TO SMALL
HOLES
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
ABP4-2130
ABP4-2131
ABP4-2133
ABP4-2361
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 89 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-3138
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-3329
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-3350
240871
ALL METALS PROCESSING
STANTON
USA
ABP4-4140
240871
ALL METALS PROCESSING
STANTON
USA
ABP6-5230
240871
ALL METALS PROCESSING
STANTON
USA
ADET0163
240871
ALL METALS PROCESSING
STANTON
USA
AIPS02-01-001
Title (PS)
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
APPLICATION OF PINHOLE FILLER
STRIPPING OF PAINTS BY CHEMICAL
METHODS
TESTING BY PENETRANT FLAW
DETECTION
ELECTROLYTIC SILVER PLATING OF
STAINLESS STEELS AND COPPER
ALLOYS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
PHYSICAL VAPOR DEPOSITION OF
TITANIUM NITRIDE FOR COATING OF
NICKEL ALLOYS, STAINLESS STEELS
AND TITANIUM ALLOYS
CHEMICAL CONVERSION COATING
PASSIVATION OF CORROSION
RESISTANT STEEL
Ref. No. (PI)
Couple qualification Status
Title (PI)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-3350
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
APPLICATION OF PINHOLE FILLER
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(MPP 130)
TBD
3 - QUALIFIED
NONE
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP1-3334
DEPOSITION OF TITANIUM NITRIDE BY
PHYSICAL VAPOUR DEPOSITION (PVD)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-3334 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-3138
ABP4-3329
240871
ALL METALS PROCESSING
STANTON
USA
AIPS02-03-003
240871
ALL METALS PROCESSING
STANTON
USA
AIPS02-05-001
240871
ALL METALS PROCESSING
STANTON
USA
AIPS02-05-005
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
ABP4-2125
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
240871
ALL METALS PROCESSING
ALL METALS PROCESSING
STANTON
STANTON
USA
USA
AIPI02-05-001
AIPI02-05-005
CHEMICAL CONVERSION COATING
PASSIVATION OF CORROSION
RESISTANT STEEL
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3135
APPLICATION OF FILLER TO SMALL
HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3135 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3350 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-3329
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3329 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 90 of 876
240871
ALL METALS PROCESSING
STANTON
USA
AIPS05-05-003
240871
240871
ALL METALS PROCESSING
ALL METALS PROCESSING
STANTON
STANTON
USA
USA
AITM6-1001
AITM6-2001
240871
ALL METALS PROCESSING
STANTON
USA
SANTA FE SPRINGS
USA
ALL POWER MANUFACTURING
136557
CO
Airbus Qualified Special Process List (External Report)
PENETRANT TESTING
NA
NOT APPLICABLE
MAGNETIC PARTICLE INSPECTION
NA
NOT APPLICABLE
TESTING OF STEELS AFTER
AITM6-3006
NA
NOT APPLICABLE
MACHINING BY ETCH INSPECTION
PREPARATION OF HOLES IN METALLIC
PREPARATION OF HOLES IN METALLIC
AIPS01-02-003
AIPI01-02-003
MATERIALS FOR FASTENING
MATERIALS FOR FASTENING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
Status
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
PRECISION GRINDING
NO
3 - QUALIFIED
NONE
AIPI03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO
3 - QUALIFIED
NONE
ELECTROCHEMICAL MARKING
AIPI08-03-001
ELECTROCHEMICAL MARKING
NO
3 - QUALIFIED
NONE
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
HEAT TREATMENT OF RIVETS PRIOR
TO RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
HARDNESS TESTING OF METALLIC
MATERIALS
AIPI08-03-002
PERMANENT MARKING WITH INK
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
136557
ALL POWER MANUFACTURING
CO
SANTA FE SPRINGS
USA
AIPS02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
AIPI02-04-001
SANTA FE SPRINGS
USA
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
SANTA FE SPRINGS
USA
AIPS03-11-002
PRECISION GRINDING
AIPI03-11-002
SANTA FE SPRINGS
USA
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
SANTA FE SPRINGS
USA
AIPS08-03-001
SANTA FE SPRINGS
USA
AIPS08-03-002
SANTA FE SPRINGS
USA
AIPS09-01-002
136557
136557
136557
136557
136557
ALL POWER MANUFACTURING
CO
ALL POWER MANUFACTURING
CO
ALL POWER MANUFACTURING
CO
ALL POWER MANUFACTURING
CO
ALL POWER MANUFACTURING
CO
ALL POWER MANUFACTURING
CO
240873
ALLOY HEAT TREATMENT
DUDLEY
United Kingdom
ABP3-1118
240873
ALLOY HEAT TREATMENT
DUDLEY
United Kingdom
ABP3-1119
240873
ALLOY HEAT TREATMENT
DUDLEY
United Kingdom
ABP3-1120
240873
ALLOY HEAT TREATMENT
DUDLEY
United Kingdom
ABP6-5224
240873
ALLOY HEAT TREATMENT
DUDLEY
United Kingdom
ABP6-5226
240873
ALLOY HEAT TREATMENT
DUDLEY
United Kingdom
AIPS04-01-001
303118
ALLOY PROCESSING
COMPTON
USA
ABP1-1023
303118
ALLOY PROCESSING
COMPTON
USA
ABP4-1123
303118
ALLOY PROCESSING
COMPTON
USA
ABP4-2130
303118
ALLOY PROCESSING
COMPTON
USA
ABP6-5230
303118
ALLOY PROCESSING
COMPTON
USA
ABP8-1290
303118
ALLOY PROCESSING
COMPTON
USA
ABP8-1294
303118
ALLOY PROCESSING
COMPTON
USA
ABP8-1296
303118
ALLOY PROCESSING
COMPTON
USA
ABP8-2297
303118
ALLOY PROCESSING
COMPTON
USA
ABP8-2299
303118
ALLOY PROCESSING
COMPTON
USA
AIPS02-01-001
303118
ALLOY PROCESSING
COMPTON
USA
AIPS02-04-009
303118
ALLOY PROCESSING
COMPTON
USA
AIPS02-05-001
303118
ALLOY PROCESSING
COMPTON
USA
AIPS02-05-005
303118
ALLOY PROCESSING
COMPTON
USA
AIPS03-03-001
303118
ALLOY PROCESSING
COMPTON
USA
AIPS05-02-003
303118
ALLOY PROCESSING
COMPTON
USA
AIPS05-02-009
303118
ALLOY PROCESSING
COMPTON
USA
AIPS09-01-002
303118
ALLOY PROCESSING
COMPTON
USA
AIPS09-01-003
303118
ALLOY PROCESSING
COMPTON
USA
AIPS09-02-005
303118
ALLOY PROCESSING
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
COMPTON
USA
AITM6-1001
HAMBURG
Germany
80-T-30-9910
136908
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
ARP-ID
136557
Couple qualification Status
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
AIPI09-01-002
ABP3-1118
ABP3-1119
ABP3-1120
Title (PI)
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
MACHINING METALS BY MECHANICAL
ACTION
CLEANING WITH LIQUID NON AQUEOS
AGENTS
HEAT TREATMENT OF RIVETS PRIOR
TO RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
TBD
3 - QUALIFIED
NONE
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
YES
3 - QUALIFIED
NONE
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
CHROMIC ACID ANODISING OF
ALUMINIUM
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
TESTING BY PENETRANT FLAW
DETECTION
CLEANING AND DEGREASING OF
METALLIC MATERIALS (ALKALINE)
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
DEOXIDATION OF ALUMINIUM ALLOYS
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
PICKLING OF TITANIUM ALLOYS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
APPLICATION OF CORROSION
INHIBITING SOLID FILM LUBRICANT
CHEMICAL CONVERSION COATING
PASSIVATION OF CORROSION
RESISTANT STEEL
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
CLEANING PAINTS
WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH AQUEOUS CLEANING
AGENTS
PICKLING OF TITANIUM AND ITS
ALLOYS
PENETRANT TESTING
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
AIPI02-04-009
ABP1-1023
ABP4-1123
ABP4-2130
ABP6-5230
ABP8-1290
ABP8-1294
ABP8-1296
ABP8-2297
ABP8-2299
ABP1-1023
AIPI02-05-001
AIPI02-05-005
AIPI03-03-001
AIPI05-02-003
AIPI05-02-009
AIPI09-01-002
AIPI09-01-003
AIPI09-02-005
NA
80-T-30-9910
CHROMIC ACID ANODISING OF
ALUMINIUM
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
TESTING BY PENETRANT FLAW
DETECTION
CLEANING AND DEGREASING OF
METALLIC MATERIALS (ALKALINE)
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
DEOXIDATION OF ALUMINIUM ALLOYS
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
PICKLING OF TITANIUM ALLOYS
CHROMIC ACID ANODISING OF
ALUMINIUM
APPLICATION OF CORROSION
INHIBITING SOLID FILM LUBRICANT
CHEMICAL CONVERSION COATING
PASSIVATION OF CORROSION
RESISTANT STEEL
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
CLEANING WITH LIQUID NON AQUEOS
AGENTS
CLEANING WITH AQUEOUS CLEANING
AGENTS
PICKLING OF TITANIUM AND ITS
ALLOYS
NOT APPLICABLE
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
136908
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
HAMBURG
Germany
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
136908
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
HAMBURG
Germany
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
80-T-34-3001
INSTALLATION OF FASTENERS AND
NUTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
Airbus Qualified Special Process List (External Report)
HAMBURG
Germany
80-T-34-3016
SELF - LOCKING NUTS
80-T-34-3016
SELF - LOCKING NUTS
TBD
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
2015-02-02 - Page 91 of 876
136908
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
136908
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
HAMBURG
Germany
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
80-T-34-3050
TIGHTENING OF SCREWS AND NUTS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
136908
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
HAMBURG
Germany
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
80-T-34-5814
INSTALLATION OF SOLID ALUMINUM
RIVETS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
136908
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
HAMBURG
Germany
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
136908
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
HAMBURG
Germany
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
136908
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
136908
137041
137041
ALSTERDORFER
WERKSTAETTEN
ALSTERARBEIT BS ALSTERK
ALUMINIUM PRECISION
PRODUCTS INC
ALUMINIUM PRECISION
PRODUCTS INC
HAMBURG
Germany
80-T-40-3312
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
NO
3 - QUALIFIED
THE CONDUCTIVITY TEST PER
CHAPTER 5.3 IS PERFORMED BY AND
UNDER THE RESPONSIBILITY OF
RELEVANT AIRBUS QUALITY
DEPARTMENT.
HAMBURG
Germany
80-T-40-3710
HEAT SHRINKABLE HOSES AND
MOULDINGS
80-T-40-3710
HEAT SHRINKABLE HOSES AND
MOULDINGS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
SANTA ANA
USA
ABP0-2019
SUPPLY OF FORGINGS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
SANTA ANA
USA
ABP6-5227
INSPECTION OF ALUMINIUM
FORGINGS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-30-6919
VIBRATORY GRINDING
80-T-30-6919
VIBRATORY GRINDING
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-35-0100
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
80-T-35-0100
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-35-0110
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
80-T-35-0110
ALKALINE PICKLING OF ALUMINIUM
AND ALUMINIUM ALLOYS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-35-0114
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
80-T-35-0114
PICKLING ( BRIGHTENING ) OF
ALUMINIUM AND ALUMINIUM ALLOYS
IN NITRIC ACID
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-35-2000
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
80-T-35-2000
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-35-2001
SEALING OF ANODIZED LAYERS
80-T-35-2001
SEALING OF ANODIZED LAYERS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-35-2002
DC SULPHURIC ACID COLOR
ANODIZING WITH SEALING
80-T-35-2002
DC SULPHURIC ACID COLOR
ANODIZING WITH SEALING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
285573
ANODITEC HAMBURG GMBH &
CO KG
HAMBURG
Germany
80-T-35-2003
DICHROMAT - NACHVERDICHTUNG
VON (GS) - ANODISIERSCHICHTEN
80-T-35-2003
DICHROMAT - NACHVERDICHTUNG
VON (GS) - ANODISIERSCHICHTEN
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
HAMBURG
Germany
AIPS02-01-002
80-T-35-2002
DC SULPHURIC ACID COLOR
ANODIZING WITH SEALING
YES
HAMBURG
Germany
AIPS02-01-002
80-T-35-2001
SEALING OF ANODIZED LAYERS
YES
HAMBURG
Germany
AIPS02-01-002
POINTE-CLAIRE
Canada
ABP1-1023
POINTE-CLAIRE
Canada
ABP1-5057
POINTE-CLAIRE
Canada
ABP4-1121
285573
285573
285573
268862
268862
268862
ANODITEC HAMBURG GMBH &
CO KG
ANODITEC HAMBURG GMBH &
CO KG
ANODITEC HAMBURG GMBH &
CO KG
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ABP4-1123
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ABP4-1352
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ABP4-2124
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ABP4-2125
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ABP4-2126
Airbus Qualified Special Process List (External Report)
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
CHROMIC ACID ANODISING OF
ALUMINIUM
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
80-T-35-2000
ABP1-1023
ABP1-5057
ABP4-1121
ABP4-1123
ABP4-1352
ABP4-2124
ABP4-2125
ABP4-2126
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
CHROMIC ACID ANODISING OF
ALUMINIUM
CONVERSION COATING OF
ALUMINIUM
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
9 - LIMITED SCOPE (AIPS00-00006)
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 92 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY FOR ATR 42/72
268862
268862
268862
268862
268862
268862
268862
268862
268862
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ABP4-2128
POINTE-CLAIRE
Canada
ABP4-2130
POINTE-CLAIRE
Canada
ABP4-2131
POINTE-CLAIRE
Canada
ABP4-2133
POINTE-CLAIRE
Canada
ABP4-2361
POINTE-CLAIRE
Canada
ABP4-2364
POINTE-CLAIRE
Canada
ABP4-4140
POINTE-CLAIRE
Canada
ABP6-5224
POINTE-CLAIRE
Canada
ABP6-5230
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
STRIPPING OF PAINTS BY CHEMICAL
METHODS
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
TESTING BY PENETRANT FLAW
DETECTION
ABP4-2130
ABP4-2131
ABP4-2133
ABP4-2361
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TO BE DEFINED)
CHROMIC ACID ANODISING OF
ALUMINIUM ALLOYS
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
IPDA62-02
POINTE-CLAIRE
Canada
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
POINTE-CLAIRE
Canada
AIPS02-05-001
CHEMICAL CONVERSION COATING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
POINTE-CLAIRE
Canada
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
POINTE-CLAIRE
Canada
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
ABP4-2125
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
268862
268862
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ANODIZING AND PAINT TNM
INC
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ONLY FOR ATR 42/72
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
ANODIZING AND PAINT TNM
INC
268862
ANODIZING AND PAINT TNM
INC
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
Canada
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
POINTE-CLAIRE
Canada
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 93 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Canada
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
ONLY FOR ALUMINIUM ALLOYS ; LPI S3
ONLY
MER
France
AIPS01-02-003
AIPI01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
YES
3 - QUALIFIED
NONE
APAVE SUD EUROPE SAS CND
AERO
COLOMIERS
France
AITM6-7002
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
306790
APPLUS ILLESCAS
ILLESCAS
Spain
AITM6-4021
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS130663
138023
APS
MARNE LA VALLEE
CEDEX 2
France
ADET0098
068.2075/99
ATTESTATION OF PROCESS
QUALIFICATION
YES
3 - QUALIFIED
NONE
284665
ARESLASER
SAINT OUEN
L'AUMONE
France
AIPS03-09-001
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF33-01-STQ-09-IP2-508-A0)
YES
3 - QUALIFIED
PIÈCES DE CLASSE 2S ET 3
EPAISSEUR MINI 0,4MM - MAXI 3MM
MATÉRIAUX : INOX, ACIER, TITANE, ET
INCONEL
284665
ARESLASER
SAINT OUEN
L'AUMONE
France
AIPS03-09-002
NO
2 - AUTHORISATION TO
PROCEED UNTIL 31/05/2015
THICKNESS 1.6 MM ONLY 2000 SERIE
138405
ARMOA
CHANTELOUP LES
VIGNES
France
ADET0031
NA
3 - QUALIFIED
NONE
138405
ARMOA
CHANTELOUP LES
VIGNES
France
ADET0033
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
3 - QUALIFIED
NONE
138405
ARMOA
CHANTELOUP LES
VIGNES
France
138405
ARMOA
CHANTELOUP LES
VIGNES
138405
ARMOA
CHANTELOUP LES
VIGNES
138405
ARMOA
138405
ARMOA
138405
ARMOA
138405
ARMOA
138405
ARMOA
138405
ARMOA
138405
ARMOA
138405
ARMOA
138405
ARMOA
138405
138405
ARP-ID
Company Name
City
268862
ANODIZING AND PAINT TNM
INC
POINTE-CLAIRE
268862
ANODIZING AND PAINT TNM
INC
304026
Country
Ref. No. (PS)
Title (PS)
Canada
POINTE-CLAIRE
ANTALIA
306223
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
REFLECTOR PLATE ULTRASONIC
INSPECTION
RILSAN COATING DEPOSIT ON
ALUMINIUM ALLOYS
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
LASER CUTTING OF ALUMINIUM AND
ALUMINIUM ALLOYS
FINISHING OF ALUMINIUM ALLOY
PARTS ( DEBURRING, BREAKING OF
SHARP EDGES OR RADIUSING )
AIPI03-09-002
NO_AIRBUS_PI
LASER BEAM CUTTING OF ALUMINIUM
ALLOYS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-06-IP2-174-A0)
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF74-01-STQ-04-IP2-174-A0)
TBD
ADET0152
EDGING BY WIRE ELECTRO-EROSION
OF HARD METALLIC MATERIALS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF58-ST02-STQ-04-IP2-174-A0)
TBD
3 - QUALIFIED
France
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-04-IP2-174-A0)
ELECTRO-ÉROSION PAR
ENFONCEMENT DES PIÈCES DE
CLASSE 2S & 3 EN ACIER TYPE:
35NCS16, 15CDV6, 30NC6
YES
3 - QUALIFIED
NONE
France
ADET0191
INSTALLATION OF BALL BEARING,
SPHERICAL BEARING AND BUSHING
BY STAKING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-06-STQ-05-IP2-174-A0)
YES
3 - QUALIFIED
NONE
France
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
NONE
France
AIPS01-02-003
YES
3 - QUALIFIED
NONE
France
AIPS01-02-008
YES
3 - QUALIFIED
NONE
France
AIPS01-02-017
YES
3 - QUALIFIED
NONE
France
AIPS01-02-019
YES
3 - QUALIFIED
NONE
France
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
NO_AIRBUS_PI
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0173 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
France
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-022
YES
3 - QUALIFIED
NONE
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
NONE
CHANTELOUP LES
VIGNES
France
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-06-IP2-174-A0)
NO
9 - LIMITED SCOPE (AIPS00-00006)
ADET0031 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ARMOA
CHANTELOUP LES
VIGNES
France
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
ARMOA
CHANTELOUP LES
VIGNES
France
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
138405
ARMOA
CHANTELOUP LES
VIGNES
France
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
138405
ARMOA
CHANTELOUP LES
VIGNES
France
AITM6-9008
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
ADET0031
NA
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
ADET0033
TBD
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
ADET0033
TBD
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
CHANTELOUP LES
VIGNES
CHANTELOUP LES
VIGNES
CHANTELOUP LES
VIGNES
CHANTELOUP LES
VIGNES
CHANTELOUP LES
VIGNES
CHANTELOUP LES
VIGNES
CHANTELOUP LES
VIGNES
CHANTELOUP LES
VIGNES
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
FINISHING OF ALUMINIUM ALLOY
PARTS ( DEBURRING, BREAKING OF
SHARP EDGES OR RADIUSING )
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
AIPI01-02-003
AIPI01-02-008
AIPI01-02-017
AIPI01-02-019
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-04-IP2-174-A0)
INSTALLING THREADED CYLINDRICAL
FASTENERS
NO_AIRBUS_PI
IPDA74-01
IPDA74-01
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-05-IP2-175-A0)
SCELLEMENT A FRD BAGUEROULEMENT-ROTULE
SCELLEMENT A FRD BAGUEROULEMENT-ROTULE
2015-02-02 - Page 94 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
QUALIFICATION CONCERN ONLY
BONDING OF BUSHES, BALL
BEARINGS AND SPEHRICAL
BEARINGS. ONLY FROZEN SEALANT
ALREADY MIXED IN SYRINGUES ARE
USED.
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
ADET0082
APPLICATION OF SEALANTS
IPDA77-01
DEFROSTING - APPLICATION OF
SEALANTS
YES
3 - QUALIFIED
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
ADET0114
ELECTRICAL BONDING PROCESSES
NO_AIRBUS_PI
YES
3 - QUALIFIED
TYPE 1 - 2 - 3 - 5 ET 6
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
ADET0173
IPDA75-05
YES
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
AIPS01-02-003
YES
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
AIPS01-02-008
YES
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
AIPS01-02-017
YES
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
AIPS01-02-019
INSTALLATION OF TIGHT FIT BUSHES
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
YES
3 - QUALIFIED
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO_AIRBUS_PI
NO
9 - LIMITED SCOPE (AIPS00-00006)
228762
228762
228762
ARMOR MECA
ARMOR MECA
ARMOR MECA
PLESLIN TRIGAVOU
PLESLIN TRIGAVOU
PLESLIN TRIGAVOU
France
France
France
AIPS05-05-001
AIPS05-05-004
AIPS07-01-006
SEALING OF AIRCRAFT STRUCTURE
WET INSTALLATION OF FASTENERS
ELECTRICAL BONDING
AIPI05-05-001
AIPI05-05-004
AIPI07-01-006
YES
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
ADET0031 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
NONE
NONE
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
EN2004-1
Electrical Conductivity
NO_AIRBUS_PI
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-30-4010
NO
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-30-6918
NO
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-30-9910
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-34-3000
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-34-3002
NO
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-34-3050
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-34-3700
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-34-5817
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-34-5822
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-34-9600
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-35-0014
NO
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-35-5218
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-35-5801
NO
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-35-9023
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-35-9124
YES
3 - QUALIFIED
NONE
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
80-T-39-0132
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF ROSAN THREADED
INSERTS
TIGHTENING OF SCREWS AND NUTS
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF CLOSE-TOLERANCE
BOLTS (HI-LITE, VERI-LITE)
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
TREATMENT WITH SYNTHETIC
LUBRICANTS
PRESERVATION OF RIVET ROWS
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
AIPS08-03-002
NONE
80-T-39-0132 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
80-T-39-0132
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF83-11-STQ-05-IP2-175-A0)
INSTALLATION OF TIGHT FIT
BUSHINGS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-05-IP2-175-A0)
SEALING OF AIRCRAFT STRUCTURE
WET INSTALLATION OF FASTENERS
ELECTRICAL BONDING
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IT-PROD-16D)
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
INSTALLATION OF ANCHOR NUTS
INSTALLATION OF ROSAN THREADED
INSERTS
TIGHTENING OF SCREWS AND NUTS
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF CLOSE-TOLERANCE
BOLTS (HI-LITE, VERI-LITE)
INSTALLATION OF NAS BLIND RIVETS
ANDMS-/NASM- AND EN BLIND BOLTS
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
TREATMENT WITH SYNTHETIC
LUBRICANTS
PRESERVATION OF RIVET ROWS
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
MARKING WITH INDELIBLE INK
PERMANENT MARKING WITH INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
9 - LIMITED SCOPE (AIPS00-00006)
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
AIPI01-02-003
AIPI01-02-008
AIPI01-02-017
AIPI01-02-019
80-T-30-4010
80-T-30-6918
80-T-30-9910
80-T-34-3000
80-T-34-3002
80-T-34-3050
80-T-34-3700
80-T-34-5817
80-T-34-5822
80-T-34-9600
80-T-35-0014
80-T-35-5218
80-T-35-5801
80-T-35-9023
80-T-35-9124
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
QVA-Z10-35-00
FINAL MATERIAL INSPECTION OF
MACHINED METALLIC COMPONENTS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
QUALITY CHARACTERISTICS FOR
FINAL MATERIALS TESTING OF
ALUMINIUM AND MAGNESIUM ALLOY
COMPONENTS - HARDNESS AND
CONDUCTIVITY -
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 95 of 876
220798
ASCO DEUTSCHLAND GMBH
GEDERN
Germany
QVA-Z10-36-00
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
80-T-35-0014
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
138656
ASCO INDUSTRIES NV SA
Airbus Qualified Special Process List (External Report)
ZAVENTEM
Belgium
CLEANING WITH ORGANIC SOLVENTS
CLEANING WITH ORGANIC SOLVENTS
80-T-35-0014
(COLD CLEANING AGENTS)
(COLD CLEANING AGENTS)
CHROMATING OF ALUMINUM AND
CHROMATING OF ALUMINUM AND
80-T-35-1101
80-T-35-1101
ALUMINUM ALLOY
ALUMINUM ALLOY
80-T-35-2100
CHROMIC ACID ANODIZING
80-T-35-2100
CHROMIC ACID ANODIZING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
80-T-35-5030
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
80-T-35-5130
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
80-T-35-9120
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP1-2344
138656
138656
ASCO INDUSTRIES NV SA
ASCO INDUSTRIES NV SA
ZAVENTEM
ZAVENTEM
Belgium
Belgium
ABP1-5056
ABP2-1067
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP2-2075
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP2-2082
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP2-2336
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP3-1115
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP3-1117
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP4-1123
Title (PS)
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
COATING WITH PAINTS AND
VARNISHES, GENERAL
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
PHOSPHATING OF STEELS
RIVETING WITH BLIND RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
HEAT TREATMENT OF TITANIUM
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
Ref. No. (PI)
80-T-35-5030
80-T-35-5130
80-T-35-9120
ABP1-2344
ABP1-5056
ABP2-1067
ABP2-2075
ABP2-2082
ABP2-2336
ABP3-1115
ABP3-1117
ABP4-1123
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP4-2128
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP4-2130
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP4-5141
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP4-5142
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP4-5365
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP6-3208
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP6-5225
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP6-5226
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP6-5229
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ABP6-5230
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
ADET0191
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-003
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-005
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-008
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-013
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-017
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
AIPI01-02-019
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
AIPI01-02-022
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
Airbus Qualified Special Process List (External Report)
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
INSTALLATION OF BALL BEARING,
SPHERICAL BEARING AND BUSHING
BY STAKING
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
Title (PI)
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
COATING WITH PAINTS AND
VARNISHES, GENERAL
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
PHOSPHATING OF STEELS
RIVETING WITH BLIND RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
HEAT TREATMENT OF TITANIUM
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
ABP4-2128
ABP4-2130
ABP4-5141
ABP4-5142
ABP4-5365
ABP6-3208
ABP6-5225
ABP6-5226
Couple qualification Status
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
None
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
EN4265-07 ASSEMBLY ON PORTIQUE
C14
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 28/02/2015
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NO_AIRBUS_PI
AIPI01-02-003
AIPI01-02-005
AIPI01-02-008
AIPI01-02-013
AIPI01-02-017
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TBD)
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
INSTALLING THREADED CYLINDRICAL
FASTENERS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 96 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2075
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS02-02-002
YES
3 - QUALIFIED
ABP2-2075 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS02-04-001
NO
3 - QUALIFIED
NONE
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
YES
3 - QUALIFIED
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
YES
9 - LIMITED SCOPE (AIPS00-00006)
NONE
ABP1-5056 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
YES
3 - QUALIFIED
NONE
138656
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
AIPI02-02-002
AIPS02-05-004
DRY BLASTING
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
PHOSPHATING OF STEEL
AIPI02-05-004
DRY BLASTING
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
PHOSPHATING OF STEEL
Belgium
AIPS02-05-004
PHOSPHATING OF STEEL
ABP1-5056
PHOSPHATING OF STEELS
ZAVENTEM
Belgium
AIPS02-05-005
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS03-03-012
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS03-06-009
PASSIVATION OF CORROSION
RESISTANT STEEL
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
SHIMMING FOR ASSEMBLY
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
AIPI03-11-003
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS04-03-001
HEAT TREATMENT OF STEELS
AIPI04-03-001
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
YES
9 - LIMITED SCOPE (AIPS00-00006)
YES
3 - QUALIFIED
YES
9 - LIMITED SCOPE (AIPS00-00006)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
APPLICATION OF EXTERNAL PAINT
SYSTEMS
AIPI02-04-001
AIPI02-05-005
AIPI03-03-012
AIPI03-06-009
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-02-003
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-02-009
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-02-009
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-02-009
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-02-011
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-001
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2128
PASSIVATION OF CORROSION
RESISTANT STEEL
INSTALLATION OF BEARINGS,
SPHERICAL BEARINGS AND BUSHES
BY SWAGING
SHIM FOR ASSEMBLY
MACHINING METALS BY MECHANICAL
ACTION
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
AIPI05-02-009
ABP4-1123
ABP4-2130
AIPI05-02-011
AIPI05-05-001
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
NONE
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-004
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-007
APPLICATION OF SEALANT
IMPREGNATED FOAM
ABP4-5365
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5365 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS06-02-002
YES
3 - QUALIFIED
NONE
138656
ASCO INDUSTRIES NV SA
Airbus Qualified Special Process List (External Report)
ZAVENTEM
Belgium
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 97 of 876
NON-STRUCTURAL ADHESIVE
AIPI06-02-002
BONDING
AIPS06-02-009
ADHESIVE TAPE BONDING
AIPI06-02-009
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NON STRUCTURAL ADHESIVE
BONDING
ADHESIVE TAPE BONDING
NONE
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS07-01-004
138656
138656
ASCO INDUSTRIES NV SA
ASCO INDUSTRIES NV SA
ZAVENTEM
ZAVENTEM
Belgium
Belgium
AIPS07-01-006
AIPS08-03-002
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AIPS09-02-005
138656
138656
138656
ASCO INDUSTRIES NV SA
ASCO INDUSTRIES NV SA
ASCO INDUSTRIES NV SA
ZAVENTEM
ZAVENTEM
ZAVENTEM
Belgium
Belgium
Belgium
AITM6-1001
AITM6-2001
AITM6-3004
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AITM6-4022
138656
ASCO INDUSTRIES NV SA
ZAVENTEM
Belgium
AITM6-9008
249929
ASCOT
LE CREUSOT
France
AITM6-1001
249929
ASCOT
LE CREUSOT
France
AITM6-7002
249929
ASCOT
LE CREUSOT
France
AITM6-7002
249929
ASCOT
LE CREUSOT
France
IGC04-25-115
297819
297819
297819
297819
297819
297819
297819
297819
297819
297819
297819
297819
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
ASCOT METAL FINISHERS
LIMITED
Title (PS)
TIGHTENING PROCEDURES FOR
ELECTRICAL EQUIPMENT
ELECTRICAL BONDING
PERMANENT MARKING WITH INK
PICKLING OF TITANIUM AND ITS
ALLOYS
PENETRANT TESTING
MAGNETIC PARTICLE INSPECTION
VISUAL INSPECTION
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
PENETRANT TESTING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
FOR INSPECTION
PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
ULTRASONIC MATERIAL INSPECTION
OF METAL LIC PRODCUTS AND SEMI
PRODUCTS (THICKNESSES > 6MM)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
Ref. No. (PI)
Couple qualification Status
Title (PI)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
NO
3 - QUALIFIED
NONE
YES
NO
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
NA
NA
NA
TIGHTENING PROCEDURE FOR
ELECTRICAL EQUIPMENT
ELECTRICAL BONDING
PERMANENT MARKING WITH INK
PICKLING OF TITANIUM AND ITS
ALLOYS
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 13/03/2015
N/A
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
ONLY FOR PICKLED PARTS
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NO
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NON CYLINDRICAL PARTS
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
AIPI07-01-004
AIPI07-01-006
AIPI08-03-002
AIPI09-02-005
IGC04-25-115
COLNBROOK SLOUGH United Kingdom
80-T-35-0014
COLNBROOK SLOUGH United Kingdom
80-T-35-5000
COLNBROOK SLOUGH United Kingdom
80-T-35-5002
COLNBROOK SLOUGH United Kingdom
80-T-35-5022
COLNBROOK SLOUGH United Kingdom
80-T-35-5024
COLNBROOK SLOUGH United Kingdom
80-T-35-5035
COLNBROOK SLOUGH United Kingdom
80-T-35-5106
COLNBROOK SLOUGH United Kingdom
80-T-35-5202
COLNBROOK SLOUGH United Kingdom
80-T-35-5218
COLNBROOK SLOUGH United Kingdom
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
YES
3 - QUALIFIED
NONE
COLNBROOK SLOUGH United Kingdom
80-T-35-9030
APPLICATION OF FILLERS
80-T-35-9030
APPLICATION OF FILLERS
TBD
3 - QUALIFIED
NONE
COLNBROOK SLOUGH United Kingdom
80-T-35-9120
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
COATING WITH WASH PRIMER
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO - COMPONENT
PRIMER ( EP - BASED )
COATING WITH TWO-COMPONENT
PRIMER, EP-BASED, CHROMATE FREE
COATING WITH TWO-COPONENT
WATER-BASED PRIMER FOR FIBER
COMPOSITES, CHROMATE-FREE
COATING WITH PUR - BASED TOP
COAT
COATING WITH HIGHLY ELASTIC
PAINTS
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-0014
ULTRASONIC MATERIAL INSPECTION
OF METAL LIC PRODCUTS AND SEMI
PRODUCTS (THICKNESSES > 6MM)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
80-T-35-5000
80-T-35-5002
80-T-35-5022
80-T-35-5024
80-T-35-5035
80-T-35-5106
80-T-35-5202
80-T-35-5218
COATING WITH WASH PRIMER
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH TWO - COMPONENT
PRIMER ( EP - BASED )
COATING WITH TWO-COMPONENT
PRIMER, EP-BASED, CHROMATE FREE
COATING WITH TWO-COPONENT
WATER-BASED PRIMER FOR FIBER
COMPOSITES, CHROMATE-FREE
COATING WITH PUR - BASED TOP
COAT
COATING WITH HIGHLY ELASTIC
PAINTS
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-9120
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
80-T-35-9124
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-009
APPLICATION OF STRUCTURAL
PAINTS
YES
3 - QUALIFIED
NONE
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
80-T-35-5202
COATING WITH HIGHLY ELASTIC
PAINTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5202 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS05-05-003
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5218 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS09-01-002
AIPI09-01-002
CLEANING WITH LIQUID NON AQUEOS
AGENTS
NO
3 - QUALIFIED
NONE
297819
ASCOT METAL FINISHERS
LIMITED
COLNBROOK SLOUGH United Kingdom
AIPS09-01-002
80-T-35-0014
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
NO
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-0014 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
303197
ASHTON AND MOORE LIMITED
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
BIRMINGHAM
United Kingdom
ABP1-1023
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CHROMIC ACID ANODISING OF
ALUMINIUM
80-T-35-9124
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 98 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP1-1024
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP1-4041
303197
303197
ASHTON AND MOORE LIMITED
ASHTON AND MOORE LIMITED
BIRMINGHAM
BIRMINGHAM
United Kingdom
United Kingdom
ABP1-5056
ABP1-5057
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP1-5058
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-1121
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-1123
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-2124
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-2126
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
Title (PS)
SULPHURIC ACID ANODISING OF
ALUMINIUM
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
PHOSPHATING OF STEELS
CONVERSION COATING OF
ALUMINIUM
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-2128
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-2130
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-2131
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-2133
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP4-4140
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP6-5229
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
ABP6-5230
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS02-01-001
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
303197
ASHTON AND MOORE LIMITED
303197
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
STRIPPING OF PAINTS BY CHEMICAL
METHODS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
Ref. No. (PI)
Couple qualification Status
Title (PI)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
SULPHURIC ACID ANODISING OF
ALUMINIUM
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
PHOSPHATING OF STEELS
CONVERSION COATING OF
ALUMINIUM
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
ABP1-1024
ABP1-4041
ABP1-5056
ABP1-5057
ABP1-5058
ABP4-1121
ABP4-1123
ABP4-2124
ABP4-2126
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
ABP1-1024
SULPHURIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1024 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
United Kingdom
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
ABP1-4041
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-4041 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
BIRMINGHAM
United Kingdom
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
ABP1-5058
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5058 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS02-05-004
PHOSPHATING OF STEEL
ABP1-5056
PHOSPHATING OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5056 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2130
ABP4-2131
ABP4-2133
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 99 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
303197
ASHTON AND MOORE LIMITED
BIRMINGHAM
United Kingdom
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
ABP3-1120
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
TBD
3 - QUALIFIED
NONE
303197
240881
240881
240881
240881
ASHTON AND MOORE LIMITED
ASTRO ALUMINIUM TREATING
COMPANY INC
ASTRO ALUMINIUM TREATING
COMPANY INC
ASTRO ALUMINIUM TREATING
COMPANY INC
ASTRO ALUMINIUM TREATING
COMPANY INC
BIRMINGHAM
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
SOUTH GATE
USA
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
SOUTH GATE
USA
ABP3-1120
SOUTH GATE
USA
ABP6-5224
SOUTH GATE
USA
ABP6-5226
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
HARDNESS TESTING OF METALLIC
MATERIALS
240881
ASTRO ALUMINIUM TREATING
COMPANY INC
SOUTH GATE
USA
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-30-4010
MACHINING OF METALLIC
COMPONENTS
80-T-30-4010
MACHINING OF METALLIC
COMPONENTS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-32-2616
BEADING OF PIPE ENDS
80-T-32-2616
BEADING OF PIPE ENDS
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-34-0108
ROLLER SWAGING OF TITANIUM
TUBES INTO TUBE FITTINGS ( 3GROOVES )
80-T-34-0108
ROLLER SWAGING OF TITANIUM
TUBES INTO TUBE FITTINGS ( 3GROOVES )
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-34-0109
INSTALLATION OF PIPING AND
FLEXIBLE HOSES
80-T-34-0109
INSTALLATION OF PIPING AND
FLEXIBLE HOSES
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-34-5669
PIPE CONNECTIONS HARRISON
SYSTEM
80-T-34-5669
PIPE CONNECTIONS HARRISON
SYSTEM
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-34-5670
PIPING DEUTSCH SYSTEM
80-T-34-5670
PIPING DEUTSCH SYSTEM
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-35-0002
REINIGEN VON ROHREN
80-T-35-0002
REINIGEN VON ROHREN
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-35-0020
ALKALINE CLEANING
80-T-35-0020
ALKALINE CLEANING
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-35-0095
WATER QUALITY
80-T-35-0095
WATER QUALITY
TBD
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-39-0110
PRODUCTION OF PIPING
80-T-39-0110
PRODUCTION OF PIPING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-39-0117
BLIND PLUGS FOR PIPING, HOSES AND
EQUIPMENT
80-T-39-0117
BLIND PLUGS FOR PIPING, HOSES AND
EQUIPMENT
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-39-0136
IDENTIFICATION BY
ELECTROCHEMICAL ETCHING
80-T-39-0136
IDENTIFICATION BY
ELECTROCHEMICAL ETCHING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
208680
ATC GMBH AIRCRAFT TUBING
COMPONENTS
LIEBENSCHEID
Germany
80-T-39-1020
APPLICATION OF IDENTIFICATION
MARKINGS ON PIPES
80-T-39-1020
APPLICATION OF IDENTIFICATION
MARKINGS ON PIPES
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
LIEBENSCHEID
Germany
AIPS01-04-001
NA
NOT APPLICABLE
YES
3 - QUALIFIED
FOR A350XWB PROGRAMME
LIEBENSCHEID
Germany
AIPS01-04-008
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
ONLY FOR A350XWB PROGRAMME
LIEBENSCHEID
Germany
AIPS03-01-010
MANUFACTURING OF PIPES
AIPI03-01-010
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
MANUFACTURING OF PIPES
YES
3 - QUALIFIED
ONLY FOR A350XWB PROGRAMME
2015-02-02 - Page 100 of 876
ATC GMBH AIRCRAFT TUBING
COMPONENTS
ATC GMBH AIRCRAFT TUBING
208680
COMPONENTS
ATC GMBH AIRCRAFT TUBING
208680
COMPONENTS
Airbus Qualified Special Process List (External Report)
208680
GENERAL REQUIREMENTS FOR
WELDING AND ALLIED PROCESSES
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
139093
ATE AERO TECHNIQUE
ESPACE
DEOLS
France
AIPS03-03-001
DEOLS
France
AIPS05-02-003
DEOLS
France
AIPS05-02-003
DEOLS
France
AIPS05-02-003
DEOLS
France
AIPS05-02-003
CORNEBARRIEU
France
AIPS05-02-003
DEOLS
France
AIPS05-02-009
DEOLS
France
AIPS05-02-015
DEOLS
France
AIPS05-02-015
DEOLS
France
AIPS05-06-001
DEOLS
France
AIPS05-06-001
CORNEBARRIEU
France
AIPS05-06-001
DEOLS
France
AIPS08-02-005
CORNEBARRIEU
France
AIPS08-02-005
DEOLS
France
AIPS09-04-001
DEOLS
France
AIPS09-04-001
CORNEBARRIEU
France
AIPS09-04-001
139093
139093
139093
139093
139096
139093
139093
139093
139093
139093
139096
139093
139096
139093
139093
139096
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
ATE AERO TECHNIQUE
ESPACE
Title (PS)
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF ANTISLIP
EMERGENCY/WALKWAY PAINT
APPLICATION OF ANTISLIP
EMERGENCY/WALKWAY PAINT
APPLICATION OF DECORATIVE FILMS
FOR AIRCRAFT EXTERIOR
APPLICATION OF DECORATIVE FILMS
FOR AIRCRAFT EXTERIOR
APPLICATION OF DECORATIVE FILMS
FOR AIRCRAFT EXTERIOR
APPLICATION OF MARKINGS FOR
EXTERNAL AIRCRAFT SURFACES
APPLICATION OF MARKINGS FOR
EXTERNAL AIRCRAFT SURFACES
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
IPDA66-02
REP DEFAUT SUR REVETEMT EXT
AVION EN ALU
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
IPDA64-03
IPDA64-03
80-T-35-9127
80-T-35-9120
IPDA64-03
80-T-35-9120
IPDA64-03
80-T-35-9127
IPDA64-21
80-T-39-1021
IPDA64-21
FINAL EXTERIOR PAINTING OF
AIRCRAFT
FINAL EXTERIOR PAINTING OF
AIRCRAFT
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
COATING WITH PAINTS AND
VARNISHES, GENERAL
FINAL EXTERIOR PAINTING OF
AIRCRAFT
COATING WITH PAINTS AND
VARNISHES, GENERAL
FINAL EXTERIOR PAINTING OF
AIRCRAFT
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
A/C EXT DECORATION BY SELFADHESIVE FILM
APPLICATION OF DRY TRANSFER
DECALS
A/C EXT DECORATION BY SELFADHESIVE FILM
IPDA28-05
MARQUAGE EXTERIEUR DES AVIONS
NO
3 - QUALIFIED
NONE
IPDA28-05
MARQUAGE EXTERIEUR DES AVIONS
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
IPDA64-01
80-T-35-9127
IPDA64-01
SURFACE PREP BEFORE FINAL EXT
PAINTING
AIRCRAFT EXTERIOR PAINT SYSTEM
APPLICATION
SURFACE PREP BEFORE FINAL EXT
PAINTING
139105
ATECA VOIR CODE 115074
MONTAUBAN
France
AIPS03-09-001
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
AIPI03-09-001
LASER CUTTING OF STEEL, TITANIUM,
AND NICKEL ALLOYS
YES
3 - QUALIFIED
TITANE 1 À 1.9 MM SOUS DIAMÉTRAGE
DE 2/10 ET ÉBAVURAGE OBLIGATOIRE
+ 2.5 MM // INOX EN 0.4MM
139105
ATECA VOIR CODE 115074
MONTAUBAN
France
AIPS03-09-001
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF33-01-STQ-08-IP2-044-A0)
YES
3 - QUALIFIED
PIÈCES DE CLASSE 2S ET 3
139105
ATECA VOIR CODE 115074
MONTAUBAN
France
AIPS04-00-000
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
139105
ATECA VOIR CODE 115074
MONTAUBAN
France
AIPS04-03-001
AIPI04-03-001
YES
3 - QUALIFIED
139105
ATECA VOIR CODE 115074
MONTAUBAN
France
AIPS04-04-001
HEAT TREATMENT OF STEELS
HEAT TREATMENT OF NICKEL ALLOYS
PARTS
YES
3 - QUALIFIED
FOUR GEC Z6CNT18-10 ET EZ6NCT25
FOUR DVM POUR INCO 718 ET GEC
POUR INCO 625
139105
ATECA VOIR CODE 115074
MONTAUBAN
France
IGC04-63-110
NA
NOT APPLICABLE
NO
3 - QUALIFIED
TREMPE - REVENU - RECUIT
303179
ATELIER AERONAUTIQUE DU
SAHEL 2AS
JAMMEL MONASTIR
Tunisia
ADET0078
STRUCTURAL RIVETING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(CF-2AS-04 ISSUE 4)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
ALUMINIUM RIVET UP TO 4 MM
DIAMETER
JAMMEL MONASTIR
Tunisia
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
ALUMINIUM RIVET UP TO 4 MM
DIAMETER
JAMMEL MONASTIR
Tunisia
AIPS01-02-003
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
JAMMEL MONASTIR
Tunisia
AIPS01-02-017
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
303179
303179
303179
ATELIER AERONAUTIQUE DU
SAHEL 2AS
ATELIER AERONAUTIQUE DU
SAHEL 2AS
ATELIER AERONAUTIQUE DU
SAHEL 2AS
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
HEAT TREATMENT OF STEELS
HEAT TREATMENT OF NICKEL ALLOY
PARTS
HEAT TREATEMENT FOR STEELS INSPECTION OF OPERATIONS AND OF
PARTS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI04-04-001
AIPI01-02-003
AIPI01-02-017
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
NONE
303179
ATELIER AERONAUTIQUE DU
SAHEL 2AS
JAMMEL MONASTIR
Tunisia
AIPS05-05-003
303179
ATELIER AERONAUTIQUE DU
SAHEL 2AS
JAMMEL MONASTIR
Tunisia
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
SMALL ASSEMBLY AND METALLIC
PARTS
294296
ATELIER DE COMPOSITES
INSULAIRE
MEZZAVIA
France
ADET0007
MORTICE AND TENON JOINT OF
COMPOSITE STRUCTURES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(ICU077-ICU208-IF194-IF209-IFCCA)
YES
3 - QUALIFIED
NONE
302981
ATELIERS SS TRAITANCE DU
COMMINGES SARL ASC
SAINT GAUDENS
France
AIPS07-01-003
CABLE TYING WITH NSA935401 OR
NSA8420
AIPI07-01-003
NO
3 - QUALIFIED
NONE
302981
ATELIERS SS TRAITANCE DU
COMMINGES SARL ASC
SAINT GAUDENS
France
AIPS07-02-001
GENERAL REQUIREMENTS FOR THE
STRIPPING OF ELECTRICAL CABLES
AIPI07-02-001
YES
3 - QUALIFIED
NONE
302981
ATELIERS SS TRAITANCE DU
COMMINGES SARL ASC
AIPS07-02-009
GENERAL REQUIREMENTS FOR THE
STRIPPING OF ELECTRICAL SINGLE
CONDUCTOR CABLES DR AND AD
SERIES
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
SAINT GAUDENS
France
AIPI05-05-003
AIPI07-02-009
CABLE TYING WITH CABLE TIES
NSA935401 OR LACING TAPES
NSA8420
STRIPPING OF THE ELECTRICAL
CABLES
GENERAL REQUIREMENTS FOR THE
STRIPPING OF ELECTRICAL SINGLE
CONDUCTOR CABLED DR AND AD
SERIES
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 101 of 876
External Shop
ARP-ID
302981
302981
302981
240983
240983
240983
286512
Company Name
ATELIERS SS TRAITANCE DU
COMMINGES SARL ASC
ATELIERS SS TRAITANCE DU
COMMINGES SARL ASC
ATELIERS SS TRAITANCE DU
COMMINGES SARL ASC
ATI PACIFIC CAST
TECHNOLOGIES
ATI PACIFIC CAST
TECHNOLOGIES
ATI PACIFIC CAST
TECHNOLOGIES
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
Title (PS)
SAINT GAUDENS
France
AIPS07-03-001
SAINT GAUDENS
France
AIPS07-05-043
SAINT GAUDENS
France
AIPS07-06-002
ALBANY
USA
AIPS09-02-005
ALBANY
USA
AITM6-1001
ALBANY
USA
AITM6-7002
CLEARFIELD
USA
GENERAL REQUIREMENTS FOR
CRIMPING OF ELECTRICAL CONTACTS
INSTALLATION OF QUADRAX
CONTACTS
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATIONS
PICKLING OF TITANIUM AND ITS
ALLOYS
Ref. No. (PI)
AIPI07-03-001
AIPI07-05-043
AIPI07-06-002
AIPI09-02-005
Couple qualification Status
Title (PI)
CRIMPING OF CONTACTS TO COPPER
CABLES
INSTALLATION OF QUADRAX
CONTACTS
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATION
PICKLING OF TITANIUM AND ITS
ALLOYS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 15/02/2015
2 - AUTHORISATION TO
PROCEED UNTIL 15/02/2015
2 - AUTHORISATION TO
PROCEED UNTIL 15/02/2015
NONE
PENETRANT TESTING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
NA
NOT APPLICABLE
YES
TITANIUM PARTS ONLY
NA
NOT APPLICABLE
YES
80-T-30-0032
MACHINING OF FRP COMPONENTS
80-T-30-0032
MACHINING OF FRP COMPONENTS
YES
3 - QUALIFIED
NONE
CASTINGS PARTS ONLY
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
80-T-31-2910
MANUFACTURE OF STRUCTURAL
FIBER-REINFORCED PLASTIC (FRP)
COMPONENTS, GENERAL
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
80-T-31-2916
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
80-T-31-2916
REWORKING OF MONOLITHIC AND
SANDWICHCOMPONENTS
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
80-T-31-2950
PRODUCTION OF MONOLITHIC
COMPONENTS MADE FROM PREPREG
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-39-0132
MARKING WITH INDELIBLE INK
NO
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS03-03-006
WATER JET CUTTING
AIPI03-03-006
WATER JET CUTTING
NO
2 - AUTHORISATION TO
PROCEED UNTIL 31/12/2015
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
AIPI06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
AIPI06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
YES
3 - QUALIFIED
APPLICABLE ONLY FOR
STORAGE/DRYING REQUIREMENTS
FOR CFRP PARTS PRIOR TO BONDING
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AIPS09-01-002
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
AIPI09-01-002
CLEANING WITH LIQUID NON AQUEOS
AGENTS
NO
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AITM6-3004
VISUAL INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AITM6-4005
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AITM6-4010
INSPECTION OF FIBRE COMPOSITES
BY ULTRASONIC PHASED ARRAY
TECHNIQUE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AITM6-4011
ULTRASONIC INSPECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AITM6-4014
THICKNESS MEASUREMENT OF FIBER
COMPOSITES BY ULTRASONIC PULSEECHO TECHNIQUE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
286512
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
CLEARFIELD
USA
AITM6-4014
THICKNESS MEASUREMENT OF FIBER
COMPOSITES BY ULTRASONIC PULSEECHO TECHNIQUE
AITM6-4014
THICKNESS MEASUREMENT OF FIBER
COMPOSITES BY ULTRASONIC PULSEECHO TECHNIQUE
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
CLEARFIELD
USA
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 102 of 876
External Shop
ARP-ID
286512
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
Company Name
ATK SPACE SYSTEMS INC
AEROSPACE STRUCTURES
DIVISIO
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
CLEARFIELD
USA
AITM6-4022
YATELEY
United Kingdom
ABP2-1066
YATELEY
United Kingdom
ABP2-1067
YATELEY
United Kingdom
ABP2-1068
YATELEY
United Kingdom
ABP2-1069
YATELEY
United Kingdom
ABP2-1071
YATELEY
United Kingdom
ABP2-1072
YATELEY
United Kingdom
ABP2-2074
YATELEY
United Kingdom
ABP2-2075
YATELEY
United Kingdom
ABP2-2076
YATELEY
United Kingdom
ABP2-2082
YATELEY
United Kingdom
ABP2-2084
Title (PS)
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
Ref. No. (PI)
Title (PI)
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
AITM6-4022
ABP2-1066
ABP2-1067
ABP2-1068
ABP2-1069
ABP2-1071
ABP2-1072
ABP2-2074
ABP2-2075
ABP2-2076
ABP2-2082
ABP2-2084
Couple qualification Status
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
ABP2-2087
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
ABP2-2336
YATELEY
United Kingdom
ABP2-3088
YATELEY
United Kingdom
ABP2-3092
YATELEY
United Kingdom
ABP2-3093
YATELEY
United Kingdom
ABP2-3096
YATELEY
United Kingdom
ABP2-3097
YATELEY
United Kingdom
ABP4-5141
YATELEY
United Kingdom
ABP4-5142
YATELEY
United Kingdom
ABP4-5143
YATELEY
United Kingdom
ABP4-5144
YATELEY
United Kingdom
ABP5-1152
YATELEY
United Kingdom
ABP5-1155
YATELEY
United Kingdom
ABP5-1158
YATELEY
United Kingdom
ABP5-1160
YATELEY
United Kingdom
ABP6-2183
MACHINING COMPOSITES
ABP6-2183
MACHINING COMPOSITES
YES
3 - QUALIFIED
NONE
YATELEY
United Kingdom
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
3 - QUALIFIED
NONE
YATELEY
United Kingdom
ABP9-1312
MARKING BY MACHINE ENGRAVING
ABP9-1312
MARKING BY MACHINE ENGRAVING
TBD
3 - QUALIFIED
NONE
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
219398
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
ATLANTIC PRECISION
ENGINEERING LTD
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLING METALLIC INSERTS (
RIVNUTS )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING USING SEALANT
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
ABP2-2087
ABP2-2336
ABP2-3088
ABP2-3092
ABP2-3093
ABP2-3096
ABP2-3097
ABP4-5141
ABP4-5142
ABP4-5143
ABP4-5144
ABP5-1152
ABP5-1155
ABP5-1158
ABP5-1160
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLING METALLIC INSERTS (
RIVNUTS )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING USING SEALANT
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
LIMITED TO CLASS 3 PARTS
Airbus Qualified Special Process List (External Report)
YATELEY
United Kingdom
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 103 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-014
INSTALLATION OF COLD EXPANDED
RETAINERS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2074
MANUAL FASTENING WITH POINT
DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2074 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2075
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS01-03-002
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
AIPI01-03-002
YES
3 - QUALIFIED
LIMITED APPROVAL TO CARRY
MACHINING OF COUNTERBORE IAW
TABLE1 OF AIPI
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTERNERS
WITH ODER WITHOUT ACRES
SLEEVES
ABP2-2075 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
ABP2-3093
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3093 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
ABP6-2183
MACHINING COMPOSITES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2183 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5143
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5143 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1160
ADHESIVE BONDING WITH TWO PART
EPOXY ( REDUX 410NA )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1160 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1155
ADHESIVE BONDING WITH TWO PART
NEOPRENE ( BOSTIK 2402 )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1155 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219398
ATLANTIC PRECISION
ENGINEERING LTD
YATELEY
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1158
ADHESIVE BONDING WITH TWO PART
EPOXY (ARALDITE)
YES
9 - LIMITED SCOPE (AIPS00-00006)
139300
ATLAS AIR SERVICE AG
GANDERKESEE
Germany
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
139413
ATS ACTION TECHNOLOGIQUE
SEZANNAIS
SEZANNE
France
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
AIPI01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/07/2015
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
ABP5-1158 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
DOES NOT PERFORM ETCHING
WP A320 NEO - DRILLING DIAMETER
4.2 MM & 5.2 MM IN SUBTRATE T40 TH:
2.5 MM
2015-02-02 - Page 104 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
139413
ATS ACTION TECHNOLOGIQUE
SEZANNAIS
SEZANNE
France
AIPS03-09-001
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
AIPI03-09-001
LASER CUTTING OF STEEL, TITANIUM,
AND NICKEL ALLOYS
YES
3 - QUALIFIED
ONLY FOR TITANIUM PARTS: TH:
1.2,2,2.5 MM AND CRES PARTS: 0.6, 0.8
,1 ,1.6 ,2 MM - CUTTING OF HOLES NOT
ALLOWED AT FINAL DIMENSION.
297849
ATTEWELL LTD
HAYES
United Kingdom
ABP1-4044
NO
3 - QUALIFIED
NONE
297849
ATTEWELL LTD
HAYES
United Kingdom
ABP1-4046
NO
3 - QUALIFIED
NONE
297849
ATTEWELL LTD
HAYES
United Kingdom
ABP2-3097
YES
3 - QUALIFIED
NONE
297849
ATTEWELL LTD
HAYES
United Kingdom
ABP6-3201
TBD
3 - QUALIFIED
NONE
297849
ATTEWELL LTD
HAYES
United Kingdom
ABP6-3205
YES
3 - QUALIFIED
NONE
297849
ATTEWELL LTD
HAYES
United Kingdom
ABP8-1294
NO
3 - QUALIFIED
NONE
297849
297849
297849
ATTEWELL LTD
ATTEWELL LTD
ATTEWELL LTD
HAYES
HAYES
HAYES
United Kingdom
United Kingdom
United Kingdom
ABP9-1312
ABP9-2318
ABP9-3323
TBD
TBD
NO
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
297849
ATTEWELL LTD
HAYES
United Kingdom
ABP9-4324
TBD
3 - QUALIFIED
NONE
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS01-02-003
YES
3 - QUALIFIED
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
YES
9 - LIMITED SCOPE (AIPS00-00006)
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
CLASS 2 AND 3 PARTS ONLY
YES
3 - QUALIFIED
FOR CLASS 3 PARTS ONLY
YES
3 - QUALIFIED
FOR CLASS 3 PARTS ONLY
YES
3 - QUALIFIED
FOR CLASS 3 PARTS AND LIMITED TO
ASSEMBLY OF RECEPTACLES ONLY
YES
3 - QUALIFIED
NO
3 - QUALIFIED
YES
3 - QUALIFIED
CLASS 3 PARTS ONLY < 3.2MM
THICKNESS
YES
3 - QUALIFIED
CLASS 2 AND 3 PARTS
NO
3 - QUALIFIED
LIMITED TO CLASS 2 AND 3 PARTS
ONLY AND FOR USE OF ABRASIVE
PAPER OR RADIAL 3M SCOTCH BRITE
BRUSH ONLY
NO
3 - QUALIFIED
TEMPORARY PROTECTION AGAINST
SURFACE DAMAGE
TEMPORARY PROTECTION OF
METALLIC MATERIALS AGAINST
CORROSION
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
MARKING BY MACHINE ENGRAVING
MARKING BY BAG AND LABELS
INK MARKING GENERAL
CONTROL OF MARKING
SPECIFICATIONS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP1-4044
ABP1-4046
ABP2-3097
ABP6-3201
ABP6-3205
ABP8-1294
ABP9-1312
ABP9-2318
ABP9-3323
ABP9-4324
AIPI01-02-003
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS01-02-005
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS01-02-013
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS01-02-017
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS01-03-002
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS02-02-002
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
DRY BLASTING
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS03-03-006
WATER JET CUTTING
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS03-07-002
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS03-07-002
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS03-07-029
FINISHING OF FRP
AIPI03-07-029
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS03-11-003
297849
297849
ATTEWELL LTD
ATTEWELL LTD
HAYES
HAYES
United Kingdom
United Kingdom
AIPS05-05-001
AIPS05-05-004
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS05-05-009
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS08-03-002
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS09-01-002
297849
ATTEWELL LTD
HAYES
United Kingdom
AIPS09-01-002
297849
ATTEWELL LTD
Airbus Qualified Special Process List (External Report)
HAYES
United Kingdom
AITM6-3004
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
SEALING OF AIRCRAFT STRUCTURE
WET INSTALLATION OF FASTENERS
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
TEMPORARY PROTECTION AGAINST
SURFACE DAMAGE
TEMPORARY PROTECTION OF
METALLIC MATERIALS AGAINST
CORROSION
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
MARKING BY MACHINE ENGRAVING
MARKING BY BAG AND LABELS
INK MARKING GENERAL
CONTROL OF MARKING
SPECIFICATIONS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
AIPI02-02-002
INSTALLATION OF BLIND BOLTS PULLTYPE
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTERNERS
WITH ODER WITHOUT ACRES
SLEEVES
DRY BLASTING
AIPI03-03-006
WATER JET CUTTING
AIPI01-02-013
AIPI01-02-017
AIPI01-03-002
AIPI03-07-002
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
FINISHING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
CLASS 2 AND 3 ALUMINIUM PARTS
ONLY
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NON STRUCTURAL GRP PARTS
GROUP D PARTS FIBER REINFORCED
PLASTIC (FRP) COMPONENTS < OR =
10MM THICKNESS AND FOR METALLIC
PARTS < OR = 4MM THICKNESS
MACHINING METALS BY MECHANICAL
ACTION
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
SEALING OF AIRCRAFT STRUCTURE
WET INSTALLATION OF FASTENERS
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
NO
3 - QUALIFIED
YES
YES
3 - QUALIFIED
3 - QUALIFIED
YES
3 - QUALIFIED
ABP9-3323
INK MARKING GENERAL
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP9-3323 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPI09-01-002
CLEANING WITH LIQUID NON AQUEOS
AGENTS
NO
3 - QUALIFIED
NONE
ABP8-1294
SOLVENT CLEANING AND
DEGREASING OF MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
NOT APPLICABLE
YES
3 - QUALIFIED
AIPI03-11-003
AIPI05-05-001
AIPI05-05-004
AIPI05-05-009
VISUAL INSPECTION
NA
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
CLASS 2 AND 3 GLASSFIBRE PARTS
ONLY
CLASS 2 AND 3 GLASSFIBRE PARTS
ONLY
FOR CLASS 3 PARTS ONLY
FOR CLASS 3 PARTS ONLY
LIMITED TO CLASS 2 AND 3 PARTS
ONLY WITHOUT REQUIREMENT FOR
POLARISATION RESISTANCE
MEASUREMENT
ABP8-1294 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
LIMITED TO PERSONNEL PERFORMING
NEAR DETAILED INSPECTION
2015-02-02 - Page 105 of 876
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
139433
ATTWATER & SONS LTD
PRESTON
United Kingdom
ABP6-2183
MACHINING COMPOSITES
ABP6-2183
MACHINING COMPOSITES
YES
3 - QUALIFIED
139433
ATTWATER & SONS LTD
PRESTON
United Kingdom
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
ABP6-2183
MACHINING COMPOSITES
YES
9 - LIMITED SCOPE (AIPS00-00006)
139470
AUBERT & DUVAL
ISSOIRE CEDEX
France
ABP0-2019
NA
NOT APPLICABLE
NO
3 - QUALIFIED
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NONE
ABP6-2183 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
139470
AUBERT & DUVAL
ISSOIRE CEDEX
France
ABP6-5232
NA
NOT APPLICABLE
TBD
3 - QUALIFIED
PISCINE N°4 AND BRAS SINUS N°3
139470
AUBERT & DUVAL
ISSOIRE CEDEX
France
AIPS04-00-000
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(DQG 11-01 Y100 RÉV. B02 DU 04/06/12)
YES
3 - QUALIFIED
NONE
139470
AUBERT & DUVAL
ISSOIRE CEDEX
France
AIPS04-01-001
AIPI04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
YES
3 - QUALIFIED
NONE
139470
AUBERT & DUVAL
ISSOIRE CEDEX
France
IGC04-25-115
NA
NOT APPLICABLE
NO
3 - QUALIFIED
PISCINE N°4 , BRAS SINUS N°3 AND
BRAS SINUS N°1
139475
AUBERT ET DUVAL
PAMIERS CEDEX
France
AIPS09-03-002
YES
3 - QUALIFIED
139475
139475
AUBERT ET DUVAL
AUBERT ET DUVAL
PAMIERS CEDEX
PAMIERS CEDEX
France
France
AITM6-1001
AITM6-2001
303903
AUSARE MAROC SA
TANGER
Morocco
ADET0033
241052
AUTECH
SANIN-MYEON
South Korea
ABP6-3205
241052
AUTECH
SANIN-MYEON
South Korea
AIPS01-02-003
CLEVEDON
United Kingdom
ABP1-2035
CLEVEDON
United Kingdom
ABP1-2343
CLEVEDON
United Kingdom
ABP1-4327
CLEVEDON
United Kingdom
ABP2-1065
CLEVEDON
United Kingdom
ABP2-1067
CLEVEDON
United Kingdom
ABP2-1068
CLEVEDON
United Kingdom
ABP2-1069
CLEVEDON
United Kingdom
ABP2-1071
CLEVEDON
United Kingdom
ABP2-1072
CLEVEDON
United Kingdom
ABP2-2073
CLEVEDON
United Kingdom
ABP2-2074
CLEVEDON
United Kingdom
ABP2-2075
CLEVEDON
United Kingdom
ABP2-2076
CLEVEDON
United Kingdom
ABP2-2077
CLEVEDON
United Kingdom
ABP2-2078
CLEVEDON
United Kingdom
ABP2-2079
CLEVEDON
United Kingdom
ABP2-2080
CLEVEDON
United Kingdom
ABP2-2081
CLEVEDON
United Kingdom
ABP2-2082
CLEVEDON
United Kingdom
ABP2-2083
CLEVEDON
United Kingdom
ABP2-2084
External Shop
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
Process Specification(PS) / Process Instruction (PI)
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
ABP2-2087
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
ABP2-2336
Airbus Qualified Special Process List (External Report)
SUPPLY OF FORGINGS
TESTING BY ULTRASONIC FLAW
DETECTION
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ULTRASONIC MATERIAL INSPECTION
OF METAL LIC PRODCUTS AND SEMI
PRODUCTS (THICKNESSES > 6MM)
CHEMICAL MILLING OF TITANIUM
ALLOYS
PENETRANT TESTING
MAGNETIC PARTICLE INSPECTION
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
COLD WORKING OF HOLES
SPLIT MANDREL COLD WORKING OF
HOLES
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
MANUAL FASTENING WITH BLIND
BOLTS ( JO-BOLTS )
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
AIPI09-03-002
NA
NA
NO_AIRBUS_PI
ABP6-3205
AIPI01-02-003
CHEMICAL MILLING OF TITANIUM
ALLOYS
NOT APPLICABLE
NOT APPLICABLE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(PRS08-060-1700 IND E)
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
YES
YES
3 - QUALIFIED
3 - QUALIFIED
RESTRICTED FOR BLANKS WITHOUT
MASKED SURFACE (ONLY HOLES)
BLANK PARTS ONLY
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
FOR THE DRILLING OF PILOT HOLES
ONLY
COLD WORKING OF HOLES
YES
3 - QUALIFIED
NONE
ABP1-2035
ABP1-2343
ABP1-4327
ABP2-1065
SPLIT MANDREL COLD WORKING OF
HOLES
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND NUT PLATE
RIVETS
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
RIVETING WITH BLIND RIVETS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP2-1067
ABP2-1068
ABP2-1069
ABP2-1071
ABP2-1072
ABP2-2073
ABP2-2074
ABP2-2075
ABP2-2076
ABP2-2077
ABP2-2078
ABP2-2079
ABP2-2080
ABP2-2081
ABP2-2082
ABP2-2083
ABP2-2084
ABP2-2087
ABP2-2336
Couple qualification Status
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
MANUAL FASTENING WITH BLIND
BOLTS ( JO-BOLTS )
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 106 of 876
External Shop
ARP-ID
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
219458
Company Name
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
CLEVEDON
United Kingdom
ABP2-2337
CLEVEDON
United Kingdom
ABP2-3088
CLEVEDON
United Kingdom
ABP2-3089
CLEVEDON
United Kingdom
ABP2-3090
CLEVEDON
United Kingdom
ABP2-3091
CLEVEDON
United Kingdom
ABP2-3092
CLEVEDON
United Kingdom
ABP2-3093
CLEVEDON
United Kingdom
ABP2-3094
CLEVEDON
United Kingdom
ABP2-3095
CLEVEDON
United Kingdom
ABP2-3096
CLEVEDON
United Kingdom
ABP2-3097
CLEVEDON
United Kingdom
ABP4-5141
CLEVEDON
United Kingdom
ABP4-5142
CLEVEDON
United Kingdom
ABP4-5143
CLEVEDON
United Kingdom
ABP4-5144
CLEVEDON
United Kingdom
ABP4-5365
CLEVEDON
United Kingdom
ABP6-2183
CLEVEDON
United Kingdom
ABP6-3205
CLEVEDON
United Kingdom
ABP6-3208
CLEVEDON
United Kingdom
ABP6-3209
CLEVEDON
United Kingdom
ABP6-4220
Title (PS)
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
INSTALLING METALLIC INSERTS (
RIVNUTS )
INSTALLING METALLIC INSERTS (
SHUR-LOK - HOT MELT )
INSTALLING ALUMINIUM TWO-PART
INSERTS ( SHUR-LOK )
LOCKING AND REMOVAL OF
SERRATED FASTENING PARTS ( STALOK NUT )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
INSTALLING METALLIC INSERTS (
SHUR-TAB )
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
MACHINING COMPOSITES
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
RETENTION OF BEARINGS BY
STAKING
INSTALLING OF CONDUCTIVE RFI
GASKETS AND SEALS
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
Ref. No. (PI)
ABP2-2337
ABP2-3088
ABP2-3089
ABP2-3090
ABP2-3091
ABP2-3092
ABP2-3093
ABP2-3094
ABP2-3095
ABP2-3096
ABP2-3097
ABP4-5141
ABP4-5142
ABP4-5143
ABP4-5144
ABP4-5365
Title (PI)
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
INSTALLING METALLIC INSERTS (
RIVNUTS )
INSTALLING METALLIC INSERTS (
SHUR-LOK - HOT MELT )
INSTALLING ALUMINIUM TWO-PART
INSERTS ( SHUR-LOK )
LOCKING AND REMOVAL OF
SERRATED FASTENING PARTS ( STALOK NUT )
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
INSTALLING METALLIC INSERTS (
SHUR-TAB )
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
ABP6-2183
ABP6-3205
ABP6-3208
ABP6-3209
ABP6-4220
Couple qualification Status
MACHINING COMPOSITES
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
RETENTION OF BEARINGS BY
STAKING
INSTALLING OF CONDUCTIVE RFI
GASKETS AND SEALS
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
ABP7-1246
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-002
INSTALLATION OF TAPER SHANK
BOLTS
ABP2-2083
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2083 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-006
INSTALLATION OF LOCKBOLTS PULL
AND STUMP TYPES
ABP2-2079
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2079 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
ABP2-2337
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2337 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-014
INSTALLATION OF COLD EXPANDED
RETAINERS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2073
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2073 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2077
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2077 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
ABP7-1246
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 107 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2075
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2075 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2074
MANUAL FASTENING WITH POINT
DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2074 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-03-002
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
ABP2-2081
MANUAL FASTENING WITH 4-START
QUICK RELEASE FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2081 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
ABP2-3090
INSTALLING ALUMINIUM TWO-PART
INSERTS ( SHUR-LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3090 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
ABP2-3094
INSTALLING METALLIC INSERTS (
SHUR-TAB )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3094 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
ABP2-3089
INSTALLING METALLIC INSERTS (
SHUR-LOK - HOT MELT )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3089 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS01-03-005
INSTALLATION OF METALLIC INSERTS
(ACRES SLEEVES)
ABP2-3095
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3095 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS02-02-005
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
ABP1-2035
COLD WORKING OF HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2035 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS02-02-006
COLD EXPANSION IN METALLICS SPLIT MANDREL PROCESS
ABP1-2343
SPLIT MANDREL COLD WORKING OF
HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2343 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS02-02-010
INSTALLATION OF BUSHES BY COLD
EXPANSION PROCESS IN METALLIC
MATERIALS
ABP2-3088
INSTALLING METALLIC INSERTS (
RIVNUTS )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3088 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
ABP2-3093
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3093 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
ABP6-2183
MACHINING COMPOSITES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2183 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5143
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5143 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-007
APPLICATION OF SEALANT
IMPREGNATED FOAM
ABP4-5365
APPLICATION METHODS FOR THE USE
OF SEALANT FOAM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5365 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219458
AUTOMATIC INDUSTRIAL
MACHINES LIMITED
CLEVEDON
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 108 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
306527
AUTOPLAST SPOL SRO
CESKE BUDEJOVICE
Czech Republic
AIPS05-02-006
APPLICATION OF DECORATIVE
INTERIOR PAINT
AIPI05-02-006
APPLICATION OF DECORATIVE
INTERIOR PAINT
YES
306527
AUTOPLAST SPOL SRO
CESKE BUDEJOVICE
Czech Republic
AIPS05-04-006
AIPI05-04-006
APPLICATION OF FILLER
NO
306527
AUTOPLAST SPOL SRO
CESKE BUDEJOVICE
Czech Republic
AIPS09-01-002
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0029
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0030
STRUCTURAL BOLT TIGHTENING
TORQUES
NO_AIRBUS_PI
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0031
FINISHING OF ALUMINIUM ALLOY
PARTS ( DEBURRING, BREAKING OF
SHARP EDGES OR RADIUSING )
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0039
ACCELERATED DRYING OF PAINTS
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0071
APPLICATION OF FILLER
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
INSTALLATION OF CYLINDRICAL
SHEAR BOLTS
PAINTING OF DETAIL METALLIC PARTS
AIPI09-01-002
NO_AIRBUS_PI
CLEANING WITH LIQUID NON AQUEOS
AGENTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF R5 02-16)
NO
Status
2 - AUTHORISATION TO
PROCEED UNTIL 30/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 30/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 30/06/2015
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NONE
NONE
NONE
YES
3 - QUALIFIED
NONE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF R5 02-18)
YES
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-05-IP2-110-A0)
NA
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-07-STQ-08-IP2-110-A0)
YES
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-02-STQ-08-IP2-110-A2;
QUALIF62-21-STQ-05-IP2-110-A0)
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
ALLIAGES DE : TITANE, ALUMINIUM ET
ACIERS INOXYDABLES
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0074
GENERAL REQUIREMENTS ON
WELDING ( ALL MATERIALS )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-03-STQ-08-IP2-110-A0;
QUALIF73-02-STQ-07-IP2-110-A0;
QUALIF73-07-STQ-05-IP2-110-A0)
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0078
STRUCTURAL RIVETING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-08-IP2-110-A0)
YES
3 - QUALIFIED
RIVETAGE MULTIFRAPPE ET EN CÉ DE
RIVETS EN ALLIAGE D'ALUMINIUM Ø <
4,8 MM ET MONEL Ø<3,02
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-05-IP2-110-A0)
YES
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0134
INSTALLATION OF BLIND FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF R5 02-15)
YES
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0164
FINISHING OF HARD METAL PARTS (
BREAKING OF SHARP EDGES OR
RADIUSING )
D05014713
ATTESTATION OF PROCESS
QUALIFICATION
NA
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-08-IP2-110-A0)
YES
3 - QUALIFIED
CONTRACTION À L’AZOTE LIQUIDE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0191
INSTALLATION OF BALL BEARING,
SPHERICAL BEARING AND BUSHING
BY STAKING
QUALIF75-06-STQ-10IP2-110-A0
ATTESTATION OF PROCESS
QUALIFICATION
YES
3 - QUALIFIED
SERTISSAGE DE ROTULES SANS
BAGUES INTERMÉDIAIRES
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0202
SOUDAGE PAR RESISTANCE PAR
POINTS OU A LA MOLETTE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-03-STQ-08-IP2-110-A0)
TBD
3 - QUALIFIED
ALLIAGES DE : TITANE, ALUMINIUM ET
ACIERS INOXYDABLES
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0203
TIG WELDING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-02-STQ-07-IP2-110-A0)
TBD
3 - QUALIFIED
NONE
ADET0207
MANUAL PROCESSES FOR ARC
WELDING WITH COATED
ELECTRODES AND OXYACETYLENE
WELDING, BRAZING AND BRAZE
WELDING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-07-STQ-05-IP2-110-A0)
TBD
3 - QUALIFIED
NONE
FINAL ROUTING OF ALUMINIUM
ALLOYS SHEETS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF-R5.01-27 IND K)
NO
3 - QUALIFIED
LASER CUTTING OF ALUMINIUM
ALLOYS 2XXX SERIES FROM 1.0 MM TO
1.8 MM THICKNESSES ONLY
LASER BYSTRONIC/BYSPRINT 3015
YES
3 - QUALIFIED
ACIERS AUSTÉNITIQUES
YES
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0223
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
ADET0268
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-003
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-003
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-008
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-013
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-015
Airbus Qualified Special Process List (External Report)
MARTENSITIC AND AUSTENITIC
QUALIF62-45A-STQ-10ATTESTATION OF PROCESS
STAINLESS STEEL PASSIVATION
IP2-110-A0
QUALIFICATION
PREPARATION OF HOLES IN METALLIC
PREPARATION OF HOLES IN METALLIC
AIPI01-02-003
MATERIALS FOR FASTENING
MATERIALS FOR FASTENING
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
INSTALLATION OF BLIND BOLTS
THREADED TYPE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-08-IP2-110-A0)
NO_AIRBUS_PI
AIPI01-02-008
AIPI01-02-013
AIPI01-02-015
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
INSTALLATION OF BLIND BOLTS
THREADED TYPE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
RIVETAGE MULTIFRAPPE ET EN CÉ DE
RIVETS EN ALLIAGE D'ALUMINIUM Ø <
9 - LIMITED SCOPE (AIPS00-00- 4,8 MM ET MONEL Ø<3,02ADET0078
006)
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
2015-02-02 - Page 109 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
AIPI01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-017
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-019
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-02-022
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-04-001
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
GENERAL REQUIREMENTS FOR
WELDING AND ALLIED PROCESSES
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NONE
RIVETAGE MULTIFRAPPE ET EN CÉ DE
RIVETS EN ALLIAGE D'ALUMINIUM Ø <
9 - LIMITED SCOPE (AIPS00-00- 4,8 MM ET MONEL Ø<3,02ADET0078
006)
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-08-IP2-110-A0)
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-08-IP2-110-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
CONTRACTION À L’AZOTE
LIQUIDEADET0173 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
AIPI01-02-022
INSTALLING THREADED CYLINDRICAL
FASTENERS
YES
3 - QUALIFIED
NONE
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
FOR CLASS 2 AND 3 ONLY
YES
YES
ALLIAGES DE : TITANE, ALUMINIUM ET
ACIERS INOXYDABLESADET0202
9 - LIMITED SCOPE (AIPS00-00SCOPE & LIMITATIONS (REMARKS) IN
006)
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-04-004
RESISTANCE WELDING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-03-STQ-08-IP2-110-A0)
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS01-04-008
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS02-02-002
DRY BLASTING
AIPI02-02-002
DRY BLASTING
YES
3 - QUALIFIED
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
YES
3 - QUALIFIED
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
CHEMICAL CONVERSION COATING
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-05-IP2-110-A0)
TITANE, ACIER ET INOX AVEC
RM<1500MPA
NONE
YES
3 - QUALIFIED
NONE
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
QUALIF62-45A-STQ-10IP2-110-A0
YES
9 - LIMITED SCOPE (AIPS00-00006)
ACIERS AUSTÉNITIQUESADET0268
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
YES
3 - QUALIFIED
AUSTENITIC STEELS ONLY
YES
3 - QUALIFIED
NONE
3 - QUALIFIED
PIÈCES DE CLASSE 2S ET 3 DANS LES
MATIÈRES ET ÉPAISSEURS
SUIVANTES :
ACIER 0,6 À 3MM - ACIER INOXYDABLE
0,4 À 4MM - TITANE 0,6 À 3MM INCONEL 0,4 À 3MM
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS02-05-003
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS02-05-005
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS03-03-014
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS03-09-001
PASSIVATION OF CORROSION
RESISTANT STEEL
BONDING OF BEARINGS AND BUSHES
BY ANAEROBIC COMPOUND
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
ATTESTATION OF PROCESS
QUALIFICATION
PASSIVATION OF CORROSION
RESISTANT STEEL
COLD BONDING OF BUSHES-BALLBEARINGS-SPHERICAL BEARINGS
AIPI02-05-005
AIPI03-03-014
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF33-01-STQ-08-IP2-110-A2)
NO_AIRBUS_PI
YES
FOR CLASS 2 AND 3 ONLY
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS03-09-001
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
AIPI03-09-001
LASER CUTTING OF STEEL, TITANIUM,
AND NICKEL ALLOYS
YES
3 - QUALIFIED
QUALIFIÉ SUR LES INOX ÉPAISSEUR
0.4 MM À 3.0 MM INCLUS // ACIER 0.8-11.2-1.5 MM // TA6V 0.8 & 3 MM + 1.2 / 1.6
ET 2 MM PERÇAGE SOUS DIAMÉTRÉ
ET ÉBAVURAGE OBLIGATOIRE// T40 0,8
À 2MM ET 3MM
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
D05014713
ATTESTATION OF PROCESS
QUALIFICATION
NO
9 - LIMITED SCOPE (AIPS00-00006)
ADET0164 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-05-IP2-110-A0)
NO
9 - LIMITED SCOPE (AIPS00-00006)
ADET0031 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF61-01-STQ-05-IP2-110-A0)
YES
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS04-02-001
YES
2 - AUTHORISATION TO
PROCEED UNTIL 28/02/2015
DÉTENTE SUR T40
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS05-02-009
YES
3 - QUALIFIED
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS05-02-009
YES
9 - LIMITED SCOPE (AIPS00-00006)
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
YES
3 - QUALIFIED
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
NO_AIRBUS_PI
YES
9 - LIMITED SCOPE (AIPS00-00006)
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
NO_AIRBUS_PI
YES
9 - LIMITED SCOPE (AIPS00-00006)
Airbus Qualified Special Process List (External Report)
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
AIPI04-02-001
AIPI05-02-009
NO_AIRBUS_PI
HEAT TREATMENT OF PARTS
MANUFACTURED FROM TITANIUM AND
TITANIUM ALLOYS
APPLICATION OF STRUCTURAL
PAINTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-07-STQ-08-IP2-110-A0)
SEALING OF AIRCRAFT STRUCTURE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-05-IP2-110-A0)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-05-IP2-110-A0)
NONE
ADET0039 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
2015-02-02 - Page 110 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-05-IP2-110-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS07-01-006
ELECTRICAL BONDING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF83-11-STQ-05-IP2-110-A0)
YES
3 - QUALIFIED
TYPES 1-2-3-4-5
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS08-03-001
ELECTROCHEMICAL MARKING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF28-02-STQ-05-IP2-110-A0)
NO
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS08-03-002
PERMANENT MARKING WITH INK
NO_AIRBUS_PI
NO
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS08-03-002
PERMANENT MARKING WITH INK
AIPI08-03-002
NO
3 - QUALIFIED
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS08-04-005
LASER BEAM MARKING OF HARD
METALS
NO_AIRBUS_PI
NO
3 - QUALIFIED
NONE
ALLIAGE DE TITANE, ACIER
INOXYDABLE AUSTÉNITIQUE ET BASE
NICKEL(INCO 625) SUR PIÈCES DE
CLASSE 3 ET 2S
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AIPS09-02-005
YES
3 - QUALIFIED
NONE
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AITM6-1001
YES
3 - QUALIFIED
S 2-4
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AITM6-6004
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
AITM6-7002
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
IGC04-25-100
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
IGC04-25-101
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
IGC04-25-102
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
IGC04-25-110
293050
AUVERGNE AERONAUTIQUE
AULNAT
France
IGC04-25-120
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
ADET0031
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
293591
AUVERGNE AERONAUTIQUE
GROUPE
200202
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF28-07-STQ-09-IP2-110-A0)
NA
PICKLING OF TITANIUM AND ITS
ALLOYS
NOT APPLICABLE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
UPDATED DUE TO CANCELLATION OF
IGC 04 25 110,INITIAL QUALIFICATION
REF : 693.643/94
NA
NOT APPLICABLE
NO
3 - QUALIFIED
S 2-4
NA
NOT APPLICABLE
NO
3 - QUALIFIED
S 2-4
NA
NOT APPLICABLE
NO
3 - QUALIFIED
S 2-4
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
FINISHING OF ALUMINIUM ALLOY
PARTS ( DEBURRING, BREAKING OF
SHARP EDGES OR RADIUSING )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-05-IP2-282-A1)
NA
3 - QUALIFIED
NONE
ADET0033
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF74-01-STQ-06-IP2-282-A1)
TBD
3 - QUALIFIED
NONE
France
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
YES
3 - QUALIFIED
NONE
CLERMONT FERRAND
France
ADET0071
PAINTING OF DETAIL METALLIC PARTS
IPDA64-02
YES
3 - QUALIFIED
NONE
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
ADET0072
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
TBD
3 - QUALIFIED
NONE
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
ADET0074
GENERAL REQUIREMENTS ON
WELDING ( ALL MATERIALS )
NA
NOT APPLICABLE
TBD
3 - QUALIFIED
MANUAL WELDING
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
ADET0078
STRUCTURAL RIVETING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-08-IP2-282-A1)
YES
3 - QUALIFIED
POSE AU CÉ DES RIVETS ALU
JUSQU'AU DIAMÈTRE 4
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-07-IP2-282-A1)
YES
3 - QUALIFIED
NONE
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-06-IP2-282-A1)
YES
3 - QUALIFIED
NONE
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STQ-07-IP2-282-A1)
YES
3 - QUALIFIED
NONE
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
ADET0191
INSTALLATION OF BALL BEARING,
SPHERICAL BEARING AND BUSHING
BY STAKING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-06-STQ-08-IP-282-A1)
YES
3 - QUALIFIED
SERTISSAGE À LA MOLETTE
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
ADET0223
FINAL ROUTING OF ALUMINIUM
ALLOYS SHEETS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(09/IT/13 REV 7)
NO
3 - QUALIFIED
LASER CUTTING OF ALUMINIUM
ALLOYS 6XXX SERIES WITH 0.8 MM
THICKNESS ONLY
LASER PRIMA RAPIDO N°114
AUXERRE CEDEX
France
ADET0237
FORMING AND RECTIFICATION OF
SUBCONTRACTOR (S/C) PROCESS
METALLIC MATERIALS BY 3 POINTS
NO_AIRBUS_PI
INSTRUCTION
BENDING
(QUALIF42-19-STQ-05-IP2-282-A1)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
Yes
3 - QUALIFIED
NONE
AUVERGNE AERONAUTIQUE
GROUPE
Airbus Qualified Special Process List (External Report)
200202
PICKLING OF TITANIUM AND ITS
ALLOYS
PENETRANT TESTING
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF28-04-STQ-08-IP2-110-A0)
PERMANENT MARKING WITH INK
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
METALLIC ELEMENTS LIQUID
PENETRANT INSPECTION
FLUORESCENT DYE PENETRANT
INSPECTION ALLOWED MATERIALS
VISUAL INSPECTIONS UNDER
ULTAVIOLET RADIATION
RADIOGRAPHIC INSPECTION
INSTRUCTIONS
INSTRUCTIONS FOR INSPECTIONS BY
ELECTRICAL CONDUCTIVITY (EDDY
CURRENTS)
AIPI09-02-005
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STQ-07-IP2-282-A1)
PEINTURE MANUELLE DES PIECES
ELEM METALL
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-05-IP2-282-A1)
2015-02-02 - Page 111 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
MANUAL RIVETING (CE + MULTI
STROKE)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
AIPS01-01-004
INSTALLATION OF SOLID RIVETS
AIPI01-01-004
INSTALLATION OF SOLID RIVETS
NO
3 - QUALIFIED
YES
9 - LIMITED SCOPE (AIPS00-00006)
POSE AU CÉ DES RIVETS ALU
DIAMÈTRES 2,8 ET 3,2ADET0078
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
YES
3 - QUALIFIED
PROCESS WITH DISASSEMBLY
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-08-IP2-282-A1)
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
AIPI01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
POSE AU CÉ DES RIVETS ALU
DIAMÈTRES 2,8 ET 3,2ADET0078
SCOPE & LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-12-STQ-08-IP2-282-A1)
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
AIPI01-02-019
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
YES
3 - QUALIFIED
ALUMINIUM SERIES ONLY
METHOD B SHRINK FIT INSTALLATION
BY COOLING THE BUSH
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-06-IP2-282-A1)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0173 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
AIPS01-04-008
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
MANUAL WELDING
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(INS-PSQ-04 IND E)
YES
3 - QUALIFIED
NONE
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
AUXERRE CEDEX
France
AIPS02-05-005
YES
3 - QUALIFIED
AUXERRE CEDEX
France
AIPS03-03-014
YES
3 - QUALIFIED
200202
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
PASSIVATION OF CORROSION
RESISTANT STEEL
BONDING OF BEARINGS AND BUSHES
BY ANAEROBIC COMPOUND
AIPI03-03-014
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
AIPS03-09-001
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
AIPI03-09-001
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS03-10-003
RECTIFICATION OF METALLIC
MATERIALS BY 3 POINT BENDING
AIPI03-10-003
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS03-10-003
RECTIFICATION OF METALLIC
MATERIALS BY 3 POINT BENDING
NO_AIRBUS_PI
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO_AIRBUS_PI
CLERMONT FERRAND
France
AIPS04-00-000
CLERMONT FERRAND
France
AIPS04-01-001
AUXERRE CEDEX
France
AIPS05-02-009
CLERMONT FERRAND
France
AIPS05-02-009
AUXERRE CEDEX
France
AIPS05-02-009
AUXERRE CEDEX
France
AIPS05-02-011
AUXERRE CEDEX
France
AIPS05-05-001
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
CLERMONT FERRAND
France
AIPS05-05-001
293591
293591
200202
293591
200202
200202
200202
293591
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
PASSIVATION OF CORROSION
RESISTANT STEEL
COLD BONDING OF BUSHES-BALLBEARINGS-SPHERICAL BEARINGS
AIPI02-05-005
LASER CUTTING OF STEEL, TITANIUM,
AND NICKEL ALLOYS
RECITIFICATION OF METALLIC
MATERIALS BY 3 POINT BENDING
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF42-19-STQ-05-IP2-282-A1)
# REPAIR APPLICATION
# LOCAL APPLICATION WITHOUT
PAINT APPLICATION
CORROSION RESISTANT STEEL WITH
RM < 1100 MPA
ALUMINIUM PARTS WITH STAINLESS
STEEL BUSHES ONLY
YES
3 - QUALIFIED
ONLY INOX 0,4/0,8/1/1,5 AND 2 MM AND
CUTTING OF HOLES NOT ALLOWED AT
FINAL DIMENSIONS (2/10 UNDER) FOR
THICKNESS 0,4 AND 0,8 MM+ TI IN 1.6
MM
Yes
3 - QUALIFIED
ALUMINIUM ALLOYS PARTS ONLY
Yes
9 - LIMITED SCOPE (AIPS00-00006)
ADET0237 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NO
9 - LIMITED SCOPE (AIPS00-00006)
ADET0031 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
PARTS CLASS 2 AND 3
YES
3 - QUALIFIED
PART CLASS 2 AND 3
YES
3 - QUALIFIED
METALLIC PARTS
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0071 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
AIPI05-05-001
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-05-IP2-282-A1)
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
APPLICATION OF STRUCTURAL
PAINTS
PEINTURE MANUELLE DES PIECES
ELEM METALL
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STQ-07-IP2-282-A1)
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
SEALING OF AIRCRAFT STRUCTURE
SEALING OF AIRCRAFT STRUCTURE
AIPI05-05-001
SEALING OF AIRCRAFT STRUCTURE
YES
3 - QUALIFIED
NONE
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
AIPI04-01-001
AIPI04-01-001
AIPI05-02-009
IPDA64-02
NO_AIRBUS_PI
AIPI05-02-011
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-07-IP2-282-A1)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
AIPS05-05-003
YES
3 - QUALIFIED
PAINT BRUSH ONLY
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS05-05-006
YES
3 - QUALIFIED
NONE
AUXERRE CEDEX
France
AIPS05-05-006
YES
9 - LIMITED SCOPE (AIPS00-00006)
AUVERGNE AERONAUTIQUE
GROUPE
Airbus Qualified Special Process List (External Report)
200202
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
AIPI05-05-003
AIPI05-05-006
APPLICATION OF NON HARDENING
NO_AIRBUS_PI
JOINTING COMPOUNDS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-07-IP2-282-A1)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
2015-02-02 - Page 112 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF83-11-STQ-07-IP2-282-A1)
YES
3 - QUALIFIED
TYPES 1 - 2 ET 3
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
AIPI05-05-008
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
NO_AIRBUS_PI
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AIPS07-01-006
ELECTRICAL BONDING
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
AIPS07-01-006
ELECTRICAL BONDING
Title (PI)
APPLICATION OF LOW ADHESION
SEALANT
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF77-01-STQ-07-IP2-282-A1)
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
# ETCHING OPERATION PERFORMED
ONLY FOR ALUMINIUM PARTS
# ETCHING OPERATION
SUBCONTRACTED FOR TITANIUM AND
STAINLESS STEEL
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AITM6-2001
MAGNETIC PARTICLE INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
293591
AUVERGNE AERONAUTIQUE
GROUPE
CLERMONT FERRAND
France
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUXERRE CEDEX
France
AITM6-9008
NA
NOT APPLICABLE
YES
3 - QUALIFIED
MEASUREMENT "4 POINTS" METHOD
ALLOWED (M1 & M2)
AUXERRE CEDEX
France
IGC04-25-100
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AUXERRE CEDEX
France
IGC04-25-101
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AUXERRE CEDEX
France
IGC04-25-102
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
AUXERRE CEDEX
France
IGC04-25-105
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
068.2535/98
ATTESTATION OF PROCESS
QUALIFICATION
YES
3 - QUALIFIED
NONE
068.2443/98
ATTESTATION OF PROCESS
QUALIFICATION
TBD
3 - QUALIFIED
NONE
068.2535/98
ATTESTATION OF PROCESS
QUALIFICATION
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
MANUAL DRILLING ONLY IN
COMPOSITE MATERIAL
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 31/12/2015
VALID UNTIL 31-12-2015
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(AIF-GY.S-010)
YES
3 - QUALIFIED
NONE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(CCAC AI-008)
YES
3 - QUALIFIED
NONE
200202
200202
200202
200202
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
AUVERGNE AERONAUTIQUE
GROUPE
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
METALLIC ELEMENTS LIQUID
PENETRANT INSPECTION
FLUORESCENT DYE PENETRANT
INSPECTION ALLOWED MATERIALS
VISUAL INSPECTIONS UNDER
ULTAVIOLET RADIATION
METALLIC ELEMENTS - MAGNETIC
PARTICLE INSPECTION
PAINTING FOR DETAIL PARTS IN
COMPOSITE MATERIALS ( EXCEPT
FURNISHING CABIN INTERIOR )
PAINTS ON COMPOSITES
MANUFACTURED WITH PHENOLIC
RESIN BASE REINFORCED BY LONG
FIBRES
139956
AVIA PEINTURE
SAINT MARTIN DE
SEIGNAN
France
ADET0092
139956
AVIA PEINTURE
SAINT MARTIN DE
SEIGNAN
France
ADET0149
139956
AVIA PEINTURE
SAINT MARTIN DE
SEIGNAN
France
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
291981
AVIACOMP SAS
LAUNAGUET
France
AIPS01-02-005
291981
AVIACOMP SAS
LAUNAGUET
France
AIPS01-02-008
291981
AVIACOMP SAS
LAUNAGUET
France
AIPS01-03-004
291981
AVIACOMP SAS
LAUNAGUET
France
AIPS01-04-015
291981
AVIACOMP SAS
LAUNAGUET
France
AIPS03-02-020
291981
AVIACOMP SAS
LAUNAGUET
France
AIPS05-05-006
291981
AVIACOMP SAS
LAUNAGUET
France
AIPS05-05-009
291981
AVIACOMP SAS
LAUNAGUET
France
AITM6-3004
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0025
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0029
CHENGDU
China
ADET0030
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
Airbus Qualified Special Process List (External Report)
294318
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF HELICOIL
THREADED INSERTS
WELDING OF THERMOPLASTIC PARTS
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
VISUAL INSPECTION
PROCESS FOR FASTENERS
INSTALLATION ON UNCURED
INTERFAY SEALANT
INSTALLATION OF CYLINDRICAL
SHEAR BOLTS
AIPI01-02-008
AIPI01-03-004
AIPI01-04-015
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF HELICAL THREADED
INSERTS
WELDING OF THERMOPLASTIC PARTS
MANUFACTURING OF MONOLITHIC
PARTS WITH THERMOPLASTIC
MATERIAL
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
AIPI03-02-020
AIPI05-05-006
AIPI05-05-009
NA
NO_AIRBUS_PI
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
NOT APPLICABLE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(AIF-GY.S-009)
NO_AIRBUS_PI
STRUCTURAL BOLT TIGHTENING
NO_AIRBUS_PI
TORQUES
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 113 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0033
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(320-YS.S.0021)
TBD
3 - QUALIFIED
NONE
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0059
INSPECTION OF PERMANENT AND
REMOVABLE FASTENERS AFTER
INSTALLATION
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(AIF-R-ET-006)
YES
3 - QUALIFIED
NONE
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(AIF-YS.S-006)
YES
3 - QUALIFIED
NONE
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0078
STRUCTURAL RIVETING
IPDA71-12
RIVETING OF METAL ASSEMBLIES
YES
3 - QUALIFIED
AUTO RIVETING - GEMCOR MACHINES MODEL GRS4010SXX-144 - MODEL
GRS3013TX-125/G2000
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(AIF-YS.S-021)
YES
3 - QUALIFIED
NONE
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0114
ELECTRICAL BONDING PROCESSES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(AIF.R-ET-010)
YES
3 - QUALIFIED
NONE
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0134
INSTALLATION OF BLIND FASTENERS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(AIF-R-ET-009)
YES
3 - QUALIFIED
NONE
294318
AVIC CHENGFEI COMMERCIAL
AIRCRAFT COMPANY LTD
CHENGDU
China
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(A320-GY.S-001)
YES
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-1067
RIVETING WITH BLIND RIVETS
ABP2-1067
RIVETING WITH BLIND RIVETS
YES
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-1068
YES
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-1069
YES
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-1071
TBD
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-1072
TBD
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-2075
YES
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-2079
YES
3 - QUALIFIED
NONE
SHENYANG
China
ABP2-2087
YES
3 - QUALIFIED
NONE
SHENYANG
China
AIPS01-02-003
YES
3 - QUALIFIED
NONE
SHENYANG
China
AIPS01-02-008
YES
3 - QUALIFIED
NONE
SHENYANG
China
AIPS01-02-013
YES
3 - QUALIFIED
NONE
SHENYANG
China
AIPS01-02-017
YES
3 - QUALIFIED
NONE
SHENYANG
China
AIPS01-02-017
SHENYANG
China
AIPS02-01-001
SHENYANG
China
AIPS02-05-001
SHENYANG
China
AIPS04-01-001
SHENYANG
China
AIPS05-02-009
SHENYANG
China
AIPS05-02-009
SHENYANG
China
AIPS05-02-009
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
304104
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
CHEMICAL CONVERSION COATING
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
ABP2-1068
ABP2-1069
ABP2-1071
ABP2-1072
ABP2-2075
ABP2-2079
ABP2-2087
AIPI01-02-003
80-T-34-3050
AIPI01-02-013
80-T-34-3001
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TIGHTENING OF SCREWS AND NUTS
INSTALLATION OF BLIND BOLTS PULLTYPE
INSTALLATION OF FASTENERS AND
NUTS
80-T-34-5815
INSTALLATION OF HI-LOKS
YES
3 - QUALIFIED
NONE
80-T-35-2100
CHROMIC ACID ANODIZING
YES
3 - QUALIFIED
NONE
80-T-35-1101
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
YES
3 - QUALIFIED
NONE
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PAINTS AND
VARNISHES, GENERAL
COATING WITH PUR - BASED TOP
COAT
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
APPLICATION OF SEALING
COMPOUNDS
80-T-35-5002
80-T-35-9120
80-T-35-5106
304104
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
SHENYANG
China
AIPS05-02-011
304104
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
SHENYANG
China
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
80-T-34-9600
304104
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
SHENYANG
China
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
YES
3 - QUALIFIED
NONE
SHENYANG
China
AIPS05-05-004
WET INSTALLATION OF FASTENERS
80-T-34-5803
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
NONE
SHENYANG
China
AIPS07-01-006
ELECTRICAL BONDING
80-T-40-3312
ELECTRICAL BONDING
YES
3 - QUALIFIED
NONE
304104
304104
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
AVIC SAC COMMERCIAL
AIRCRAFT COMPANY LIMITED
Airbus Qualified Special Process List (External Report)
80-T-35-9124
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 114 of 876
External Shop
ARP-ID
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
140168
Company Name
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
AVON VALLEY PRECISION
ENGINEERING
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
BRISTOL
United Kingdom
ABP2-1065
BRISTOL
United Kingdom
ABP2-1066
BRISTOL
United Kingdom
ABP2-1067
BRISTOL
United Kingdom
ABP2-1068
BRISTOL
United Kingdom
ABP2-1071
BRISTOL
United Kingdom
ABP2-1072
BRISTOL
United Kingdom
ABP2-2082
BRISTOL
United Kingdom
ABP2-2336
BRISTOL
United Kingdom
ABP2-3092
BRISTOL
United Kingdom
ABP2-3096
BRISTOL
United Kingdom
ABP2-3097
BRISTOL
United Kingdom
ABP4-5141
BRISTOL
United Kingdom
ABP4-5142
BRISTOL
United Kingdom
ABP4-5143
BRISTOL
United Kingdom
ABP4-5144
BRISTOL
United Kingdom
ABP6-3205
BRISTOL
United Kingdom
ABP6-3208
Title (PS)
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
Ref. No. (PI)
Title (PI)
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
ABP2-1065
ABP2-1066
ABP2-1067
ABP2-1068
ABP2-1071
ABP2-1072
ABP2-2082
ABP2-2336
ABP2-3092
ABP2-3096
ABP2-3097
ABP4-5141
ABP4-5142
ABP4-5143
ABP4-5144
ABP6-3205
ABP6-3208
Couple qualification Status
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
ABP2-3093
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3093 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5143
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5143 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 115 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140168
AVON VALLEY PRECISION
ENGINEERING
BRISTOL
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
TOLEDO
Spain
AIPS01-02-008
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
AIPI01-02-008
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
YES
3 - QUALIFIED
NONE
TOLEDO
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
NONE
296205
296205
AYA AERONAUTICA Y
AUTOMOCION SA
AYA AERONAUTICA Y
AUTOMOCION SA
296205
AYA AERONAUTICA Y
AUTOMOCION SA
TOLEDO
Spain
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
AIPI03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
YES
3 - QUALIFIED
NONE
296205
AYA AERONAUTICA Y
AUTOMOCION SA
TOLEDO
Spain
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
RESTRICTED TO ALUMINIUM ALLOYS
ONLY
296205
AYA AERONAUTICA Y
AUTOMOCION SA
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
ONLY TYPE I, METHOD A
YES
3 - QUALIFIED
NONE
NA
3 - QUALIFIED
ONLY PRESS FIT
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
296205
296205
296205
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
AYA AERONAUTICA Y
AUTOMOCION SA
AYA AERONAUTICA Y
AUTOMOCION SA
AYA AERONAUTICA Y
AUTOMOCION SA
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
TOLEDO
Spain
AITM6-6004
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
TOLEDO
Spain
I+D-E-137
PENETRANT INSPECTION PROCESS
TOLEDO
Spain
I+D-P-358
TOLEDO
Spain
I+D-P-366
BLACKBURN
United Kingdom
ABP1-1023
BLACKBURN
United Kingdom
ABP1-2028
BLACKBURN
United Kingdom
ABP1-2344
BLACKBURN
United Kingdom
ABP1-3038
BLACKBURN
United Kingdom
ABP1-4327
BLACKBURN
United Kingdom
ABP1-5057
BLACKBURN
United Kingdom
ABP2-1065
BLACKBURN
United Kingdom
ABP2-1066
BLACKBURN
United Kingdom
ABP2-1067
BLACKBURN
United Kingdom
ABP2-1068
BLACKBURN
United Kingdom
ABP2-1069
BLACKBURN
United Kingdom
ABP2-1072
BLACKBURN
United Kingdom
ABP2-2073
BLACKBURN
United Kingdom
ABP2-2077
BLACKBURN
United Kingdom
ABP2-2079
BLACKBURN
United Kingdom
ABP2-2082
BLACKBURN
United Kingdom
ABP2-2084
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
ABP2-2087
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
ABP2-2336
BLACKBURN
United Kingdom
ABP2-2337
BLACKBURN
United Kingdom
ABP2-3092
BLACKBURN
United Kingdom
ABP2-3093
140523
140523
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
Airbus Qualified Special Process List (External Report)
PAINTING OF COMPOSITE DETAIL
PARTS
INSTALACION DE CASQUILLOS EN
MONTAJE CON INTERFERENCIA
CHROMIC ACID ANODISING OF
ALUMINIUM
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
I+D-P-358
I+D-P-366
ABP1-1023
ABP1-2028
ABP1-2344
DEPOSITION OF ZINC BY SPRAYING
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
ABP1-3038
RIVETING WITH BLIND RIVETS
ABP2-1067
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
ABP1-4327
ABP1-5057
ABP2-1065
ABP2-1066
ABP2-1068
ABP2-1069
ABP2-1072
ABP2-2073
ABP2-2077
ABP2-2079
ABP2-2082
ABP2-2084
ABP2-2087
ABP2-2336
ABP2-2337
ABP2-3092
ABP2-3093
PAINTING OF COMPOSITE DETAIL
PARTS
INSTALACION DE CASQUILLOS EN
MONTAJE CON INTERFERENCIA
CHROMIC ACID ANODISING OF
ALUMINIUM
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
DEPOSITION OF ZINC BY SPRAYING
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 116 of 876
External Shop
ARP-ID
140523
140523
140523
140523
140523
140523
140523
Company Name
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
BLACKBURN
United Kingdom
ABP2-3094
BLACKBURN
United Kingdom
ABP2-3095
BLACKBURN
United Kingdom
ABP2-3096
BLACKBURN
United Kingdom
ABP2-3097
BLACKBURN
United Kingdom
ABP3-1119
BLACKBURN
United Kingdom
ABP3-1120
BLACKBURN
United Kingdom
ABP4-1121
Title (PS)
INSTALLING METALLIC INSERTS (
SHUR-TAB )
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
ABP4-1123
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
ABP4-2124
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
ABP4-2125
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
140523
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
140523
LIMITED MILITARY AIR SOLUTI
BAE SYSTEMS OPERATIONS
140523
LIMITED MILITARY AIR SOLUTI
Airbus Qualified Special Process List (External Report)
140523
BLACKBURN
United Kingdom
ABP4-2128
BLACKBURN
United Kingdom
ABP4-2130
BLACKBURN
United Kingdom
ABP4-2133
BLACKBURN
United Kingdom
ABP4-4139
BLACKBURN
United Kingdom
ABP4-5143
BLACKBURN
United Kingdom
ABP5-1147
BLACKBURN
United Kingdom
ABP5-1152
BLACKBURN
United Kingdom
ABP6-3205
BLACKBURN
United Kingdom
ABP6-3207
BLACKBURN
United Kingdom
ABP6-3208
BLACKBURN
United Kingdom
ABP6-3209
BLACKBURN
United Kingdom
ABP6-5224
BLACKBURN
United Kingdom
ABP6-5226
BLACKBURN
United Kingdom
ABP6-5229
BLACKBURN
United Kingdom
ABP6-5230
BLACKBURN
United Kingdom
ABP6-5232
BLACKBURN
United Kingdom
ABP6-5233
BLACKBURN
United Kingdom
ABP6-5346
BLACKBURN
United Kingdom
BLACKBURN
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF EROSION RESISTANT
PAINT
STRIPPING OF PAINTS BY BLASTING (
PAINTBLAST )
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
ADHESIVE BONDING USING SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS BY EPOXY
ADHESIVE
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
RETENTION OF BEARINGS BY
STAKING
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
HARDNESS TESTING OF METALLIC
MATERIALS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
TESTING BY ULTRASONIC FLAW
DETECTION
TESTING COMPOSITES BY
ULTRASONIC FLAW DETECTION
Ref. No. (PI)
ABP2-3094
ABP2-3095
ABP2-3096
ABP2-3097
ABP3-1119
ABP3-1120
ABP4-1121
ABP4-1123
ABP4-2124
ABP4-2125
Couple qualification Status
Title (PI)
INSTALLING METALLIC INSERTS (
SHUR-TAB )
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2130
ABP4-2133
ABP4-4139
ABP4-5143
ABP5-1147
ABP5-1152
ABP6-3205
ABP6-3207
ABP6-3208
ABP6-3209
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF EROSION RESISTANT
PAINT
STRIPPING OF PAINTS BY BLASTING (
PAINTBLAST )
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
ADHESIVE BONDING USING SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
RETENTION OF BEARINGS BY EPOXY
ADHESIVE
RETENTION OF BEARINGS AND
BUSHES BY ANAEROBIC MATERIALS
RETENTION OF BEARINGS BY
STAKING
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP6-5232
TESTING BY ULTRASONIC FLAW
DETECTION
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
TESTING BY RADIOGRAPHY
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP7-1246
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
ABP7-1246
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
YES
3 - QUALIFIED
NONE
United Kingdom
ABP8-1296
DEOXIDATION OF ALUMINIUM ALLOYS
ABP8-1296
DEOXIDATION OF ALUMINIUM ALLOYS
TBD
3 - QUALIFIED
NONE
BLACKBURN
United Kingdom
ABP8-2297
NO
3 - QUALIFIED
NONE
BLACKBURN
United Kingdom
ABP8-2298
YES
3 - QUALIFIED
NONE
BLACKBURN
United Kingdom
ABP8-2299
YES
3 - QUALIFIED
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
PICKLING OF STAINLESS STEELS AND
NICKEL ALLOYS
ABP8-2297
ABP8-2298
PICKLING OF ALUMINIUM ALLOYS AS A
PRE-TREATMENT
PICKLING OF STAINLESS STEELS AND
NICKEL ALLOYS
PICKLING OF TITANIUM ALLOYS
ABP8-2299
PICKLING OF TITANIUM ALLOYS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NONE
2015-02-02 - Page 117 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
NO
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP2-2079
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2079 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
ABP2-2337
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2337 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2073
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2073 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2077
MANUAL FASTENING WITH BLIND
BOLTS ( COMPOSI-LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2077 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
BLACKBURN
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-03-003
INSTALLATION OF INSERTS IN NON
METALLICS
ABP2-3094
INSTALLING METALLIC INSERTS (
SHUR-TAB )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3094 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-03-005
INSTALLATION OF METALLIC INSERTS
(ACRES SLEEVES)
ABP2-3095
INSTALLING METALLIC INSERTS (
ACRES SLEEVES )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3095 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
ABP1-2028
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2028 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS02-05-003
PASSIVATION OF MARTENSITIC AND
AUSTENITIC STEEL
ABP8-2298
PICKLING OF STAINLESS STEELS AND
NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP8-2298 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
ABP2-3093
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3093 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
ABP4-2125
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
ABP8-2301
PICKLING OF ALUMINIUM ALLOYS FOR
METAL REMOVAL
ABP8-2301
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-02-006
INSTALLATION OF LOCKBOLTS PULL
AND STUMP TYPES
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS01-02-013
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
140523
Airbus Qualified Special Process List (External Report)
BLACKBURN
United Kingdom
Title (PI)
PICKLING OF ALUMINIUM ALLOYS FOR
METAL REMOVAL
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 118 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5143
APPLICATION OF HIGH TEMPERATURE
SILICONE SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5143 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP5-1147 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1147
PREPARATION OF RUBBER FOR
ADHESIVE BONDING
YES
9 - LIMITED SCOPE (AIPS00-00006)
140523
BAE SYSTEMS OPERATIONS
LIMITED MILITARY AIR SOLUTI
BLACKBURN
United Kingdom
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
ABP8-2299
PICKLING OF TITANIUM ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
254524
BAIMTEC MATERIAL CO LTD
BEIJING
China
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
AIPI09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 30/04/2015
254524
BAIMTEC MATERIAL CO LTD
BEIJING
China
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
254524
BAIMTEC MATERIAL CO LTD
BEIJING
China
AITM6-1001
NA
NOT APPLICABLE
YES
3 - QUALIFIED
254524
BAIMTEC MATERIAL CO LTD
BEIJING
China
AITM6-7002
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
LANSING
USA
80-T-32-1005
NO
3 - QUALIFIED
NONE
LANSING
USA
80-T-32-5000
LANSING
USA
80-T-33-3010
LANSING
USA
80-T-33-3111
LANSING
USA
80-T-33-3515
PENETRANT TESTING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
FORMING OF TI AND TI¿ALLOY
SHEETS
SUPERPLASTIC FORMING OF TI AND
AL ALLOYS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
LASER BEAM CUTTING OF METALLIC
MATERIALS
CHEMICAL MILLING OF TITANIUM AND
TITANIUM ALLOYS
ABP8-2299 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
LIMITED TO ETCHING PRIOR
PENETRANT TESTING (TANK N°5)
TITANIUM PARTS ON THE BIAM SITE
OF AVIC BEIJING INSTITUE OF
AERONAUTICAL MATERIALS
NONE
LANSING
USA
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
80-T-34-6620
INERT GAS FUSION WELDING (TIG)
YES
LANSING
USA
80-T-35-0020
ALKALINE CLEANING
80-T-35-0020
ALKALINE CLEANING
NO
LANSING
USA
80-T-35-0090
RINSING
80-T-35-0090
RINSING
TBD
LANSING
USA
80-T-35-0095
WATER QUALITY
80-T-35-0095
WATER QUALITY
TBD
LANSING
USA
80-T-35-0106
PICKLING OF TITANIUM AND TITANIUM
ALLOYS - ACID -
80-T-35-0106
PICKLING OF TITANIUM AND TITANIUM
ALLOYS - ACID -
YES
LANSING
USA
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
80-T-35-0200
ABRASIVE BLASTING - CLEANING -
YES
LANSING
USA
AIPS01-04-008
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
LANSING
USA
AIPS02-02-002
DRY BLASTING
AIPI02-02-002
DRY BLASTING
YES
LANSING
USA
AIPS03-09-001
LANSING
USA
AIPS03-09-003
LANSING
USA
AIPS03-10-002
219253
219253
219253
219253
219253
219253
219253
219253
219253
219253
219253
219253
219253
219253
219253
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
Airbus Qualified Special Process List (External Report)
219253
LASER CUTTING OF STEEL, TITANIUM
AND NICKEL ALLOYS
SHEAR-CUTTING OF METALLIC
SHEETS AND SECTIONS
80-T-32-1005
80-T-32-5000
80-T-33-3010
80-T-33-3111
80-T-33-3515
AIPI03-09-001
AIPI03-09-003
FORMING OF TI AND TI¿ALLOY
SHEETS
SUPERPLASTIC FORMING OF TI AND
AL ALLOYS
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
LASER BEAM CUTTING OF METALLIC
MATERIALS
CHEMICAL MILLING OF TITANIUM AND
TITANIUM ALLOYS
LASER CUTTING OF STEEL, TITANIUM,
AND NICKEL ALLOYS
SHEAR-CUTTING OF METALLIC
SHEETS AND SECTIONS
RECTIFICATION OF METALLIC
FORMING OF ALUMINIUM SHEETS AND
80-T-32-1000
MATERIALS BY ROLL FORMING
SECTIONS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
NO
NO
YES
YES
NO
NO
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 15/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 15/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 15/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 15/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 15/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
10 - LIMITED SCOPE
NONE
NONE
TITANIUM ALLOY WITH THICKNESS
FROM 0.029 TO 0.038 INCH
ALPHA CASE REMOVAL ONLY
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
TITANIUM ALLOYS WITH THICKNESS
FORM 0.029 TO 0.032 INCH
NONE
80-T-32-1000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
2015-02-02 - Page 119 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
219253
BARNES AEROSPACE LANSING
DIV
LANSING
USA
AIPS03-10-003
RECTIFICATION OF METALLIC
MATERIALS BY 3 POINT BENDING
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
Yes
10 - LIMITED SCOPE
80-T-32-1000 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219253
BARNES AEROSPACE LANSING
DIV
LANSING
USA
AIPS03-10-008
SUPERPLASTIC FORMING OF
TITANIUM ALLOYS
AIPI03-10-008
SUPERPLASTIC FORMING OF
TITANIUM ALLOYS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
NONE
219253
BARNES AEROSPACE LANSING
DIV
LANSING
USA
AIPS03-10-011
HARD METAL FORMING - GENERAL
REQUIREMENTS
80-T-32-1005
FORMING OF TI AND TI¿ALLOY
SHEETS
NO
10 - LIMITED SCOPE
80-T-32-1005 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
LANSING
USA
AIPS03-10-011
AIPI03-10-011
HARD METAL FORMING
NO
3 - QUALIFIED
TITANIUM PARTS
LANSING
USA
AIPS09-01-003
LANSING
USA
AIPS09-02-005
LANSING
USA
AIPS09-03-002
HAMBURG
Germany
80-T-35-5035
219253
219253
219253
219253
284212
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BARNES AEROSPACE LANSING
DIV
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HARD METAL FORMING - GENERAL
REQUIREMENTS
CLEANING WITH AQUEOUS CLEANING
AGENTS
PICKLING OF TITANIUM AND ITS
ALLOYS
CHEMICAL MILLING OF TITANIUM
ALLOYS
COATING WITH TWO-COPONENT
WATER-BASED PRIMER FOR FIBER
COMPOSITES, CHROMATE-FREE
AIPI09-01-003
AIPI09-02-005
AIPI09-03-002
80-T-35-5035
CLEANING WITH AQUEOUS CLEANING
AGENTS
PICKLING OF TITANIUM AND ITS
ALLOYS
CHEMICAL MILLING OF TITANIUM
ALLOYS
COATING WITH TWO-COPONENT
WATER-BASED PRIMER FOR FIBER
COMPOSITES, CHROMATE-FREE
NO
YES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 15/06/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 14/04/2015
NONE
NONE
ALPHA CASE REMOVAL ONLY
TBD
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
80-T-35-5106
COATING WITH PUR - BASED TOP
COAT
80-T-35-5106
COATING WITH PUR - BASED TOP
COAT
YES
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
YES
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
YES
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
80-T-35-5404
APPLICATION OF FILLER
80-T-35-5404
APPLICATION OF FILLER
TBD
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
80-T-35-9030
APPLICATION OF FILLERS
80-T-35-9030
APPLICATION OF FILLERS
TBD
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
YES
3 - QUALIFIED
NONE
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
80-T-35-5256
COATING WITH CONDUCTIVE PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5256 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-02-006
APPLICATION OF DECORATIVE
INTERIOR PAINT
80-T-35-5404
APPLICATION OF FILLER
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5404 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9120 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-02-011
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-04-003
COSMETIC REWORK BY COLD CURE
ADHESIVE
80-T-35-9030
APPLICATION OF FILLERS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-9030 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
284212
BAUER JOHN GMBH
AUTOLACKIERUNG U
UNFALLREP BETRIEB
HAMBURG
Germany
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
80-T-35-5218
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
YES
9 - LIMITED SCOPE (AIPS00-00006)
80-T-35-5218 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
305404
BEAGLE TECHNOLOGY GROUP
LIMITED
CHRISTCHURCH
United Kingdom
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
3 MONTHS APPROVAL GRANTED,
SUBMIT APPROVAL REQUEST END OF
MARCH 2014
240885
BENNETT HEAT TREATING
AND BRAZING COMPANY
IVYLAND
USA
ABP3-1117
HEAT TREATMENT OF TITANIUM
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
3 - QUALIFIED
NONE
240885
BENNETT HEAT TREATING
AND BRAZING COMPANY
IVYLAND
USA
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 120 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
COUNTERSINK EXCLUDED.
DEFINITIONS OF CUTTING
CONDITIONS AND CONTROLS AFTER
DRILLING CAN'T BE REALISED BY
BESNE MECANIQUE. IF HOLE
TOLERANCE IS H9 OR MORE
RESTRICTIVE, 100% OF DIAMETERS
WILL BE CONTROLLED
DEFINITIONS OF CUTTING
CONDITIONS AND CONTROLS AFTER
MACHINING CAN'T BE REALISED BY
BESNE MECANIQUE.
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
142435
BESNE MECANIQUE DE
PRECISION
BESNE
France
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
142435
BESNE MECANIQUE DE
PRECISION
BESNE
France
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
YES
3 - QUALIFIED
157200
BETRANCOURT SAS
ALBERT
France
ADET0031
FINISHING OF ALUMINIUM ALLOY
PARTS ( DEBURRING, BREAKING OF
SHARP EDGES OR RADIUSING )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-06-IP2-177-A0)
NA
3 - QUALIFIED
NONE
157200
BETRANCOURT SAS
ALBERT
France
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-05-STQ-06-IP2-177-A0)
NO
9 - LIMITED SCOPE (AIPS00-00006)
ADET0031 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
BREMEN
Germany
QVA-Z10-54-03
EXAMINATION FOR COPPER
DIFFUSION IN CLADDING
NA
NOT APPLICABLE
NO
3 - QUALIFIED
241058
BK WERKSTOFFTECHNIK
PRUEFSTELLE FUER
WERKSTOFFE GM
BODYCOTE BELGIUM
BRUSSELS
Belgium
ABP3-1117
HEAT TREATMENT OF TITANIUM
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
3 - QUALIFIED
241058
BODYCOTE BELGIUM
BRUSSELS
Belgium
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
STOCKPORT
United Kingdom
80-T-36-1015
HEAT TREATMENT OF TITANIUM
80-T-36-1015
HEAT TREATMENT OF TITANIUM
YES
3 - QUALIFIED
NONE
STOCKPORT
United Kingdom
80-T-36-1020
HEAT TREATMENT OF STEEL
80-T-36-1020
HEAT TREATMENT OF STEEL
YES
3 - QUALIFIED
NONE
STOCKPORT
United Kingdom
ABP3-1114
NITRIDING OF STEELS
ABP3-1114
NITRIDING OF STEELS
YES
3 - QUALIFIED
NONE
MACCLESFIELD
United Kingdom
ABP3-1115
YES
3 - QUALIFIED
NONE
STOCKPORT
United Kingdom
ABP3-1115
YES
3 - QUALIFIED
NONE
ROTHERHAM
United Kingdom
ABP3-1115
YES
3 - QUALIFIED
NONE
CAMBRIDGE
United Kingdom
ABP3-1115
YES
3 - QUALIFIED
NONE
MACCLESFIELD
United Kingdom
ABP3-1116
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
NONE
STOCKPORT
United Kingdom
ABP3-1116
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
NONE
ROTHERHAM
United Kingdom
ABP3-1116
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
NONE
SKELMERSDALE
United Kingdom
ABP3-1116
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
NONE
CAMBRIDGE
United Kingdom
ABP3-1116
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
NONE
STOCKPORT
United Kingdom
ABP3-1117
HEAT TREATMENT OF TITANIUM
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
3 - QUALIFIED
NONE
ROTHERHAM
United Kingdom
ABP3-1117
HEAT TREATMENT OF TITANIUM
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
3 - QUALIFIED
NONE
CAMBRIDGE
United Kingdom
ABP3-1117
HEAT TREATMENT OF TITANIUM
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
3 - QUALIFIED
NONE
MACCLESFIELD
United Kingdom
ABP3-1366
TBD
3 - QUALIFIED
NONE
MACCLESFIELD
United Kingdom
ABP6-5226
TBD
3 - QUALIFIED
NONE
STOCKPORT
United Kingdom
ABP6-5226
TBD
3 - QUALIFIED
NONE
ROTHERHAM
United Kingdom
ABP6-5226
TBD
3 - QUALIFIED
NONE
SKELMERSDALE
United Kingdom
ABP6-5226
TBD
3 - QUALIFIED
NONE
CAMBRIDGE
United Kingdom
ABP6-5226
TBD
3 - QUALIFIED
NONE
143041
240886
240886
240886
143446
240886
240887
288579
143446
240886
240887
255961
288579
240886
240887
288579
143446
143446
240886
240887
255961
288579
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
BODYCOTE HEAT
TREATMENTS LIMITED
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
CARBURISING AND CARBO-NITRIDING
AND HEAT TREATMENT OF
CARBURISING STEELS.
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
ABP3-1115
ABP3-1115
ABP3-1115
ABP3-1115
ABP3-1366
ABP6-5226
ABP6-5226
ABP6-5226
ABP6-5226
ABP6-5226
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
CARBURISING AND CARBO-NITRIDING
AND HEAT TREATMENT OF
CARBURISING STEELS.
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION)
NONE
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240886
BODYCOTE HEAT
TREATMENTS LIMITED
STOCKPORT
United Kingdom
AIPS02-02-013
THERMOCHEMICAL TREATMENT OF
STEELS BY NITRIDING
ABP3-1114
NITRIDING OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1114 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240886
BODYCOTE HEAT
TREATMENTS LIMITED
STOCKPORT
United Kingdom
AIPS04-00-000
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
240886
BODYCOTE HEAT
TREATMENTS LIMITED
STOCKPORT
United Kingdom
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 121 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
240887
BODYCOTE HEAT
TREATMENTS LIMITED
ROTHERHAM
United Kingdom
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
288579
BODYCOTE HEAT
TREATMENTS LIMITED
CAMBRIDGE
United Kingdom
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240886
BODYCOTE HEAT
TREATMENTS LIMITED
STOCKPORT
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
AIPI04-03-001
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
NONE
143446
BODYCOTE HEAT
TREATMENTS LIMITED
MACCLESFIELD
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1116 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240886
BODYCOTE HEAT
TREATMENTS LIMITED
STOCKPORT
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1116 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240887
BODYCOTE HEAT
TREATMENTS LIMITED
ROTHERHAM
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1116 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
255961
BODYCOTE HEAT
TREATMENTS LIMITED
SKELMERSDALE
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1116 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
288579
BODYCOTE HEAT
TREATMENTS LIMITED
CAMBRIDGE
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1116 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240887
BODYCOTE HEAT
TREATMENTS LIMITED
ROTHERHAM
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
AIPI04-04-001
HEAT TREATMENT OF NICKEL ALLOYS
PARTS
YES
3 - QUALIFIED
ONLY TO INCONEL 625.
143446
BODYCOTE HEAT
TREATMENTS LIMITED
MACCLESFIELD
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240886
BODYCOTE HEAT
TREATMENTS LIMITED
STOCKPORT
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240887
BODYCOTE HEAT
TREATMENTS LIMITED
ROTHERHAM
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
288579
BODYCOTE HEAT
TREATMENTS LIMITED
CAMBRIDGE
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CHELTENHAM
United Kingdom
ABP3-1115
YES
3 - QUALIFIED
NONE
CHARD
United Kingdom
ABP3-1115
YES
3 - QUALIFIED
NONE
CHARD
United Kingdom
ABP3-1116
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
NONE
CHARD
United Kingdom
ABP3-1117
HEAT TREATMENT OF TITANIUM
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
3 - QUALIFIED
NONE
CHELTENHAM
United Kingdom
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
CHELTENHAM
United Kingdom
ABP6-5226
TBD
3 - QUALIFIED
NONE
CHARD
United Kingdom
ABP6-5226
TBD
3 - QUALIFIED
NONE
143434
143436
143436
143436
143434
143434
143436
BODYCOTE HEAT
TREATMENTS LTD
BODYCOTE HEAT
TREATMENTS LTD
BODYCOTE HEAT
TREATMENTS LTD
BODYCOTE HEAT
TREATMENTS LTD
BODYCOTE HEAT
TREATMENTS LTD
BODYCOTE HEAT
TREATMENTS LTD
BODYCOTE HEAT
TREATMENTS LTD
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
ABP3-1115
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
HARDNESS TESTING OF METALLIC
MATERIALS
HARDNESS TESTING OF METALLIC
MATERIALS
ABP6-5226
ABP6-5226
143434
BODYCOTE HEAT
TREATMENTS LTD
CHELTENHAM
United Kingdom
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
143434
BODYCOTE HEAT
TREATMENTS LTD
CHELTENHAM
United Kingdom
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
143436
BODYCOTE HEAT
TREATMENTS LTD
CHARD
United Kingdom
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
ABP3-1117
HEAT TREATMENT OF TITANIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1117 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
143434
BODYCOTE HEAT
TREATMENTS LTD
CHELTENHAM
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1116 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
143436
BODYCOTE HEAT
TREATMENTS LTD
CHARD
United Kingdom
AIPS04-03-001
HEAT TREATMENT OF STEELS
ABP3-1116
HEAT TREATMENT OF STEELS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1116 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
143434
BODYCOTE HEAT
TREATMENTS LTD
CHELTENHAM
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
143436
BODYCOTE HEAT
TREATMENTS LTD
CHARD
United Kingdom
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
ABP3-1115
STRESS RELIEVING HEAT TREATMENT
OF STEELS AND NICKEL ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
241059
251550
BODYCOTE HIP LIMITED
BODYCOTE HIP LIMITED
CHESTERFIELD
HEREFORD
United Kingdom
United Kingdom
ABP0-2018
ABP0-2018
SUPPLY OF CASTINGS
SUPPLY OF CASTINGS
ABP0-2018
ABP0-2018
SUPPLY OF CASTINGS
SUPPLY OF CASTINGS
TBD
TBD
3 - QUALIFIED
3 - QUALIFIED
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
ABP3-1115 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
NONE
2015-02-02 - Page 122 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
223087
BODYCOTE HIT
AMBAZAC
France
ADET0075
WEAR RESISTANCE COATING (
TUNGSTEN CARBIDE TYPE ) FOR
STEELS, ALUMINIUM ALLOYS AND
TITANIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-ST11-STQ-09-IP2-1515-A0)
YES
3 - QUALIFIED
REVÊTEMENT WC-CO AVEC PROCÉDÉ
HVOF SUR SUPPORT ACIER
INOXYDABLE CLASSE 2S ET 3
223087
BODYCOTE HIT
AMBAZAC
France
AIPS02-03-001
APPLICATION OF THERMAL SPRAY
COATINGS WC-CO AND WC-CO-CR
AIPI02-03-001
APPLICATION OF THERMAL SPRAY
COATINGS WC-CO AND WC-CO-CR
YES
3 - QUALIFIED
INOX AND TITANIUM, CLASS 2S & 3
ONLY
REVÊTEMENT WC-CO AVEC PROCÉDÉ
HVOF SUR SUPPORT ACIER
9 - LIMITED SCOPE (AIPS00-00INOXYDABLEADET0075 SCOPE &
006)
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
223087
BODYCOTE HIT
AMBAZAC
France
AIPS02-03-001
APPLICATION OF THERMAL SPRAY
COATINGS WC-CO AND WC-CO-CR
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-ST11-STQ-09-IP2-1515-A0)
YES
223087
BODYCOTE HIT
AMBAZAC
France
AIPS02-03-007
APPLICATION OF THERMALLY
SPRAYED COBALT CHROMIUM
MOLYBDENUM COATINGS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IA PR 07 03)
YES
3 - QUALIFIED
T800
AIPS02-03-011
MOLYBDENUM COATING OF TI6AL4V,
INCONEL AND VERY HIGH STRENGTH
STAINLESS STEEL (RM > 1200 MPA) BY
THERMAL SPRAYING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QCS110199)
YES
3 - QUALIFIED
NONE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(X53RP0631749
QUALIFICATION AI-F: 693.928/96 AUDIT: AE05017)
YES
3 - QUALIFIED
SÉRIE 7000
YES
3 - QUALIFIED
SÉRIE 7000
YES
3 - QUALIFIED
GAMMES N° 1705 ET 2250 FOUR 15
223087
BODYCOTE HIT
AMBAZAC
France
143440
BODYCOTE HIT
SERRES CASTET
France
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
NO_AIRBUS_PI
143440
BODYCOTE HIT
SERRES CASTET
France
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
SD/ME0637493
143439
BODYCOTE HIT
NEUILLY EN THELLE
France
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
AIPI04-02-001
143440
BODYCOTE HIT
SERRES CASTET
France
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
AIPI04-02-001
HEAT TREATMENT OF PARTS
MANUFACTURED FROM TITANIUM AND
TITANIUM ALLOYS
YES
3 - QUALIFIED
IN FURNACE P39/P23
143439
BODYCOTE HIT
NEUILLY EN THELLE
France
AIPS04-03-001
HEAT TREATMENT OF STEELS
IPDA61-03
HEAT TREATMENT OF HARD METALS
YES
3 - QUALIFIED
Z10 /VIEILLISSEMENT Z6 ( SUR FOUR
11 ET 15)
ATTESTATION OF PROCESS
QUALIFICATION
HEAT TREATMENT OF PARTS
MANUFACTURED FROM TITANIUM AND
TITANIUM ALLOYS
143440
BODYCOTE HIT
SERRES CASTET
France
AIPS04-03-001
HEAT TREATMENT OF STEELS
AIPI04-03-001
HEAT TREATMENT OF STEELS
YES
3 - QUALIFIED
VIEILLISEMENT ET MISE EN SOLUTION
EZ6NCT25/17-4PH/13-8MO // TREMPEREVENU 35NC6 - 15CDV6 -35 NCD16//
VIEILLISSEMENT SUR CUSTOM
465//HYPERTREMPE Z6CNT18-10
143439
BODYCOTE HIT
NEUILLY EN THELLE
France
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
IPDA61-03
HEAT TREATMENT OF HARD METALS
YES
3 - QUALIFIED
INCONEL 718 // INCONEL 625
AIPI04-04-001
HEAT TREATMENT OF NICKEL ALLOYS
PARTS
YES
3 - QUALIFIED
VIEILLISSEMENT INCO 718 SUR FOUR
P11/P16/P39/P47/P48 // MISE EN
SOLUTION INCO 625 SUR FOUR
P22/P41/P48
143440
BODYCOTE HIT
SERRES CASTET
France
AIPS04-04-001
HEAT TREATMENT OF NICKEL ALLOY
PARTS
143439
BODYCOTE HIT
NEUILLY EN THELLE
France
IGC04-63-110
HEAT TREATEMENT FOR STEELS INSPECTION OF OPERATIONS AND OF
PARTS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
INCONEL 718
WESTMINSTER
USA
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
WESTMINSTER
USA
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
3 - QUALIFIED
NONE
WESTMINSTER
USA
ABP3-1120
ABP3-1120
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
TBD
3 - QUALIFIED
NONE
WESTMINSTER
USA
ABP6-5224
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
WESTMINSTER
USA
ABP6-5226
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
TBD
3 - QUALIFIED
NONE
240890
240890
240890
240890
240890
BODYCOTE THERMAL
PROCESSING
BODYCOTE THERMAL
PROCESSING
BODYCOTE THERMAL
PROCESSING
BODYCOTE THERMAL
PROCESSING
BODYCOTE THERMAL
PROCESSING
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
HARDNESS TESTING OF METALLIC
MATERIALS
240890
BODYCOTE THERMAL
PROCESSING
WESTMINSTER
USA
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
143581
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
KAPFENBERG
Austria
ABP0-2019
SUPPLY OF FORGINGS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
143581
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
KAPFENBERG
Austria
AIPS04-00-000
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TBD)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
NONE
143581
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
KAPFENBERG
Austria
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
AIPI04-02-001
HEAT TREATMENT OF PARTS
MANUFACTURED FROM TITANIUM AND
TITANIUM ALLOYS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
NONE
KAPFENBERG
Austria
AIPS04-03-001
HEAT TREATMENT OF STEELS
AIPI04-03-001
HEAT TREATMENT OF STEELS
YES
KAPFENBERG
Austria
AIPS09-03-002
CHEMICAL MILLING OF TITANIUM
ALLOYS
AIPI09-03-002
CHEMICAL MILLING OF TITANIUM
ALLOYS
YES
KAPFENBERG
Austria
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
143581
143581
143581
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 03/02/2015
2 - AUTHORISATION TO
PROCEED UNTIL 03/02/2015
NONE
NONE
LIMITATION FOR TITANIUM FORGING
PARTS ; S3 ONLY
2015-02-02 - Page 123 of 876
External Shop
ARP-ID
143581
143581
143676
143676
143676
Company Name
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
BOEHLER SCHMIEDETECHNIK
GMBH & CO KG
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
KAPFENBERG
Austria
AITM6-2001
MAGNETIC PARTICLE INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
KAPFENBERG
Austria
IGC04-31-229
NA
NOT APPLICABLE
NO
2 - AUTHORISATION TO
PROCEED UNTIL 10/03/2015
NONE
SAINT- LAURENT
Canada
ADET0025
IPDA77-01
DEFROSTING - APPLICATION OF
SEALANTS
YES
3 - QUALIFIED
NONE
SAINT- LAURENT
Canada
ADET0029
YES
3 - QUALIFIED
ONLY FOR HILITE & BULL NOSE
SAINT- LAURENT
Canada
ADET0030
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
E-40 CDV 12 STEEL ROLLED FORGED
AND DROP-FORGED BLANKS
PROCESS FOR FASTENERS
INSTALLATION ON UNCURED
INTERFAY SEALANT
INSTALLATION OF CYLINDRICAL
SHEAR BOLTS
STRUCTURAL BOLT TIGHTENING
TORQUES
INSTALLING HI-LITE FASTENERS IN
METALLIC ASSEMBLIES
APPL COUPLE SERRAGE
BOULONNERIE STRUCTUR
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(MPS 138-55)
IPDA71-10
IPDA71-03
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0039
ACCELERATED DRYING OF PAINTS
NO_AIRBUS_PI
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0049
ALUMINIUM ALLOYS CHEMICAL
MILLING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF58-01-STQ-04-IP2-007-A0)
NO
3 - QUALIFIED
NONE
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0059
INSPECTION OF PERMANENT AND
REMOVABLE FASTENERS AFTER
INSTALLATION
IPDA71-10
INSTALLING HI-LITE FASTENERS IN
METALLIC ASSEMBLIES
YES
3 - QUALIFIED
NONE
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-007-A0;
QUALIF62-21-STQ-04-IP2-007-A0;
QUALIF62-23-STQ-04-D11032751
(RP1013964))
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
CE + AUTO + MULTIF.
YES
3 - QUALIFIED
SERIE 2000
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0078
STRUCTURAL RIVETING
068.2049/01
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0079
CHROMATING TREATMENT FOR
ALUMINIUM ALLOYS
NO_AIRBUS_PI
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(MPS 250-133 / BAPS 157-028)
YES
3 - QUALIFIED
NONE
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0091
SULFURIC - ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-23-STQ-04-IP2-007-A0)
YES
3 - QUALIFIED
NONE
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0114
ELECTRICAL BONDING PROCESSES
NO_AIRBUS_PI
YES
3 - QUALIFIED
TYPE 1 - PREVIOUS QUALIFICATION N°
QUALIF83-11-STQ-04-007-A0
SAINT- LAURENT
Canada
ADET0134
INSTALLATION OF BLIND FASTENERS
IPDA71-21
YES
3 - QUALIFIED
NONE
SAINT- LAURENT
Canada
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
IPDA75-05
YES
3 - QUALIFIED
COLD SHRINK FIT (LIQUID NITROGEN)
+ PRESS FIT METHODS
143676
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
ATTESTATION OF PROCESS
QUALIFICATION
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-04-IP2-007-A0)
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(MPS 250-171)
INSTALLING BLIND FASTENERS
ASNA0077-0078
INSTALLATION OF TIGHT FIT
BUSHINGS
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
068.2047/01
ATTESTATION OF PROCESS
QUALIFICATION
YES
3 - QUALIFIED
NONE
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-007-A0)
YES
3 - QUALIFIED
UTILISATION DE L'OAC UNIQUEMENT
EN TANT QUE TRAITEMENT AVANT
PEINTURE
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-ST02-STQ-02-IP2-007-A0)
YES
3 - QUALIFIED
ELECTROLYTIC CADMIUM PLATING ON
STEEL ALLOYS (NOT CRES ) WITH
R<1450 MPA
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
AIPI05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
YES
3 - QUALIFIED
NONE
SAINT- LAURENT
Canada
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
USINE 1 - TYPE 1 - MÉTHODE A SENSIBILITÉ 3
SAINT- LAURENT
Canada
AITM6-2001
MAGNETIC PARTICLE INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(PQDA_BOUYAUSARE_ASSEMBLY_120
62012)
TBD
3 - QUALIFIED
NONE
143676
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
IGC04-25-120
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
IGC04-63-100
143676
BOMBARDIER AERONAUTIQUE
AIRBUS BUSINESS UNIT
SAINT- LAURENT
Canada
IGC04-63-111
301288
BOUYAUSARE ETS J C BOUY
SAS
SAINT HILAIRE DE
VOUST
Airbus Qualified Special Process List (External Report)
France
ADET0033
INSTRUCTIONS FOR INSPECTIONS BY
ELECTRICAL CONDUCTIVITY (EDDY
CURRENTS)
QUALIFICATION OF HEAT TREATMENT
AND CURING INSTALLATIONS
HEAT TREATEMENT OF ALUMINIUM
ALLOYS - INSPECTION OF
OPERATIONS AND OF PARTS
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 124 of 876
External Shop
ARP-ID
Company Name
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
301288
BOUYAUSARE ETS J C BOUY
SAS
SAINT HILAIRE DE
VOUST
France
ADET0078
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP1-1023
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP1-2028
POOLE
United Kingdom
ABP1-2344
POOLE
United Kingdom
ABP1-4041
POOLE
United Kingdom
ABP1-4042
POOLE
United Kingdom
ABP1-5057
POOLE
United Kingdom
ABP1-5058
POOLE
United Kingdom
ABP4-1121
240938
240938
240938
240938
240938
240938
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
Title (PS)
STRUCTURAL RIVETING
CHROMIC ACID ANODISING OF
ALUMINIUM
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
HARD CHROMIUM PLATING
CONVERSION COATING OF
ALUMINIUM
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP4-1123
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP4-1352
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP4-2124
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP4-2125
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
240938
BOWMILL METAL TREATMENTS
LIMITED
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
240938
240938
240938
240938
240938
240938
240938
240938
240938
240938
240938
240938
240938
240938
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
BOWMILL METAL TREATMENTS
LIMITED
Airbus Qualified Special Process List (External Report)
POOLE
United Kingdom
POOLE
United Kingdom
ABP4-2128
POOLE
United Kingdom
ABP4-2130
POOLE
United Kingdom
ABP4-2131
POOLE
United Kingdom
ABP4-2133
POOLE
United Kingdom
ABP4-2361
POOLE
United Kingdom
ABP4-2364
POOLE
United Kingdom
ABP4-3135
POOLE
United Kingdom
ABP4-3138
POOLE
United Kingdom
ABP4-3329
POOLE
United Kingdom
ABP4-3350
POOLE
United Kingdom
ABP4-4140
POOLE
United Kingdom
ABP6-5225
POOLE
United Kingdom
ABP6-5226
POOLE
United Kingdom
ABP6-5229
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
APPLICATION OF PINHOLE FILLER
STRIPPING OF PAINTS BY CHEMICAL
METHODS
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
Ref. No. (PI)
Title (PI)
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(PRS-08-060-2400 IND A)
NO_AIRBUS_PI
ABP1-1023
ABP1-2028
ABP1-2344
ABP1-4041
CHROMIC ACID ANODISING OF
ALUMINIUM
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
ABP1-4042
ABP1-5057
ABP1-5058
ABP4-1121
ABP4-1123
ABP4-1352
ABP4-2124
ABP4-2125
Couple qualification Status
HARD CHROMIUM PLATING
CONVERSION COATING OF
ALUMINIUM
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
Special
Process
Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
YES
3 - QUALIFIED
- PARTS CLASS 2S AND 3
- SOLID RIVET MADE OF ALUMINIUM
CLASS 2017A-T4 UNTIL DIAMETER 4.8
MM
- STEELS MATERIALS AND ALUMINIUM
200 SERIES MATERIALS TO BE
ASSEMBLY
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2130
ABP4-2131
ABP4-2133
ABP4-2361
ABP4-2364
ABP4-3135
ABP4-3138
ABP4-3329
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
APPLICATION OF ANTI-SLIP
EMERGENCY / WALKWAY PAINTS
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
None
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
ABP6-5225
ABP6-5226
NA
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
TESTING OF STEELS AFTER
MACHINING BY ETCH INSPECTION
HARDNESS TESTING OF METALLIC
MATERIALS
NOT APPLICABLE
2015-02-02 - Page 125 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
ABP6-5230
TESTING BY PENETRANT FLAW
DETECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
ABP1-2028
SHOT PEENING FOR IMPROVED
FATIGUE AND STRESS CORROSION
RESISTANCE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2028 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
ABP1-5058
CHROMATE PASSIVATION OF
CADMIUM AND ZINC
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5058 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
ABP1-4041
CADMIUM PLATING OF STEELS
NICKEL ALLOYS & COPPER ALLOYS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-4041 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS02-04-004
HARD CHROMIUM PLATING OF STEELS
ABP1-4042
HARD CHROMIUM PLATING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-4042 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
ABP4-2125
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3135
APPLICATION OF FILLER TO SMALL
HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3135 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3350 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
POOLE
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-3329
APPPLICATION OF AERODYNAMIC
FILLER SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3329 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240938
BOWMILL METAL TREATMENTS
LIMITED
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
226181
226181
226181
BREK MANUFACTURING
COMPANY
BREK MANUFACTURING
COMPANY
BREK MANUFACTURING
COMPANY
Airbus Qualified Special Process List (External Report)
POOLE
United Kingdom
AIPS05-05-003
GARDENA
USA
ABP1-5057
GARDENA
USA
ABP2-2075
GARDENA
USA
ABP2-2336
CONVERSION COATING OF
ALUMINIUM
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
ABP1-5057
ABP2-2075
ABP2-2336
CONVERSION COATING OF
ALUMINIUM
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 126 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
INK MARKING GENERAL
NO
3 - QUALIFIED
NONE
ABP9-4324
CONTROL OF MARKING
SPECIFICATIONS
TBD
3 - QUALIFIED
NONE
Company Name
City
Country
Ref. No. (PS)
226181
BREK MANUFACTURING
COMPANY
GARDENA
USA
ABP4-1123
GARDENA
USA
ABP4-5141
GARDENA
USA
ABP4-5142
GARDENA
USA
ABP6-3205
GARDENA
USA
ABP9-3323
INK MARKING GENERAL
ABP9-3323
GARDENA
USA
ABP9-4324
CONTROL OF MARKING
SPECIFICATIONS
226181
226181
226181
226181
BREK MANUFACTURING
COMPANY
BREK MANUFACTURING
COMPANY
BREK MANUFACTURING
COMPANY
BREK MANUFACTURING
COMPANY
BREK MANUFACTURING
COMPANY
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
ARP-ID
226181
Title (PS)
Couple qualification Status
Ref. No. (PI)
ABP4-1123
ABP4-5141
ABP4-5142
ABP6-3205
Title (PI)
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
226181
BREK MANUFACTURING
COMPANY
GARDENA
USA
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
240894
BRISTOL METAL SPRAYING
AND PROTECTIVE COATINGS
LIM
BRISTOL
United Kingdom
ABP1-2344
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
ABP1-2344
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
YES
3 - QUALIFIED
NONE
240894
BRISTOL METAL SPRAYING
AND PROTECTIVE COATINGS
LIM
BRISTOL
United Kingdom
ABP1-3038
DEPOSITION OF ZINC BY SPRAYING
ABP1-3038
DEPOSITION OF ZINC BY SPRAYING
YES
3 - QUALIFIED
NONE
284678
BRONZAVIA INDUSTRIE
SARTROUVILLE
France
AIPS01-04-001
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
284678
BRONZAVIA INDUSTRIE
SARTROUVILLE
France
AIPS01-04-008
AIPI01-04-008
TUNGSTEN INERT GAS WELDING
YES
3 - QUALIFIED
MANUAL WELDING
284678
BRONZAVIA INDUSTRIE
SARTROUVILLE
France
AIPS04-00-000
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(NA)
YES
3 - QUALIFIED
NONE
284678
BRONZAVIA INDUSTRIE
SARTROUVILLE
France
AIPS04-02-001
HEAT TREATMENT OF TITANIUM AND
TITANIUM ALLOYS
AIPI04-02-001
YES
3 - QUALIFIED
RECUIT T40 FOUR FV1
284678
BRONZAVIA INDUSTRIE
SARTROUVILLE
France
AIPS04-03-001
HEAT TREATMENT OF STEELS
AIPI04-03-001
HEAT TREATMENT OF PARTS
MANUFACTURED FROM TITANIUM AND
TITANIUM ALLOYS
HEAT TREATMENT OF STEELS
YES
284678
BRONZAVIA INDUSTRIE
SARTROUVILLE
France
AITM6-1001
NA
NOT APPLICABLE
YES
284678
BRONZAVIA INDUSTRIE
SARTROUVILLE
France
AITM6-7002
NA
NOT APPLICABLE
YES
MISE EN SOLUTION SUR Z6/ FOUR FV1
WELDED PARTS AND COMPONENTS
ONLY
WELDED PARTS AND COMPONENTS
ONLY
144941
BRUNNHOEFER FRITZ GMBH
KLEBESCHILDER U ETIKETTEN
SCHWAIG
Germany
AIPS07-06-002
YES
3 - QUALIFIED
NONE
144941
BRUNNHOEFER FRITZ GMBH
KLEBESCHILDER U ETIKETTEN
SCHWAIG
Germany
AIPS07-06-007
PENETRANT TESTING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATIONS
INSTALLATION AND PROTECTION OF
ABS0724, NSA9117 AND ABS0970
LABELS.
3 - QUALIFIED
2 - AUTHORISATION TO
PROCEED UNTIL 31/05/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/05/2015
NO
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP1-2035
YES
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP1-4327
TBD
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP2-1068
YES
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP2-1072
TBD
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP2-2073
YES
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP2-2082
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
219164
219164
219164
219164
219164
219164
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
GENERAL REQUIREMENTS FOR
WELDING AND ALLIED PROCESSES
TUNGSTEN INERT GAS (TIG) WELDING
OF METALLIC MATERIALS
COLD WORKING OF HOLES
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND RIVETS (
CHOBERT )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUFACTURE OF SERRATED
FASTENING PARTS FOR LOCKING (
STA-LOK NUT )
IDENTIFICATION AND MARKING OF
ELECTRICAL INSTALLATION
INSTALLATION AND MARKING
PROCESS OF LABELS ABS0724,
ABS0970, ASNE0470 AND NSA9117
AIPI07-06-002
AIPI07-06-007
ABP1-2035
ABP1-4327
ABP2-1068
ABP2-1072
ABP2-2073
ABP2-2082
COLD WORKING OF HOLES
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
RIVETING WITH BLIND RIVETS (
CHOBERT )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUFACTURE OF SERRATED
FASTENING PARTS FOR LOCKING (
STA-LOK NUT )
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
ABP2-2086
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
ABP2-2087
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
ABP2-2087
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
YES
3 - QUALIFIED
NONE
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
ABP2-2333
MANUFACTURE AND INSPECTION OF
ROLLED THREADS ON
FASTENINGPARTS AND COMPONENTS
ABP2-2333
MANUFACTURE AND INSPECTION OF
ROLLED THREADS ON
FASTENINGPARTS AND COMPONENTS
TBD
3 - QUALIFIED
NONE
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
ABP2-2336
YES
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP2-3093
NO
3 - QUALIFIED
NONE
MUSSELBURGH
United Kingdom
ABP2-3096
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
219164
219164
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
ABP2-3097
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
ABP2-4107
Airbus Qualified Special Process List (External Report)
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
SOLDERING
ABP2-2086
ABP2-2336
ABP2-3093
ABP2-3096
ABP2-3097
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
ABP2-4107
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
SOLDERING
2015-02-02 - Page 127 of 876
External Shop
ARP-ID
219164
219164
219164
219164
219164
219164
219164
219164
Company Name
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
BRUNTONS AERO PRODUCTS
LTD
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
Title (PS)
MUSSELBURGH
United Kingdom
ABP4-5142
MUSSELBURGH
United Kingdom
ABP4-5144
MUSSELBURGH
United Kingdom
ABP6-2183
MUSSELBURGH
United Kingdom
ABP6-3201
MUSSELBURGH
United Kingdom
ABP6-3202
MUSSELBURGH
United Kingdom
ABP6-3205
MUSSELBURGH
United Kingdom
ABP6-3213
SWAGING OF CABLES
ABP6-3213
MUSSELBURGH
United Kingdom
ABP6-3214
SWAGING OF TUBES AND CONTROL
CABLES
ABP6-3214
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
MACHINING COMPOSITES
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
Ref. No. (PI)
ABP4-5142
ABP4-5144
Title (PI)
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ABP6-2183
ABP6-3201
ABP6-3202
ABP6-3205
Couple qualification Status
MACHINING COMPOSITES
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
SWAGING OF CABLES
SWAGING OF TUBES AND CONTROL
CABLES
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2073
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2073 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS02-02-005
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
ABP1-2035
COLD WORKING OF HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2035 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
ABP2-3093
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3093 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
ABP6-2183
MACHINING COMPOSITES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-2183 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS03-10-011
HARD METAL FORMING - GENERAL
REQUIREMENTS
ABP6-3202
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3202 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
219164
BRUNTONS AERO PRODUCTS
LTD
MUSSELBURGH
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
295913
BU SUNG CO LTD
SACHEON-SI
South Korea
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
YES
3 - QUALIFIED
LIMITED FOR EWB ACTIVITIES FOR
KOREAN AEROSPACE IND. ARP.ID.:
261580
295913
BU SUNG CO LTD
SACHEON-SI
South Korea
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
80-T-32-1000
FORMING OF ALUMINIUM SHEETS AND
SECTIONS
NO
3 - QUALIFIED
LIMITED FOR EWB ACTIVITIES FOR
KOREAN AEROSPACE IND. ARP.ID.:
261580
295913
BU SUNG CO LTD
SACHEON-SI
South Korea
80-T-33-3010
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
80-T-33-3010
SCHERSCHNEIDEN VON BLECHEN
UND PROFILEN
NO
3 - QUALIFIED
LIMITED FOR EWB ACTIVITIES FOR
KOREAN AEROSPACE IND. ARP.ID.:
261580
295913
BU SUNG CO LTD
SACHEON-SI
South Korea
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
NO
3 - QUALIFIED
NONE
295913
BU SUNG CO LTD
SACHEON-SI
South Korea
AIPS03-11-003
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
AIPI03-11-003
NO
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
MACHINING METALS BY MECHANICAL
ACTION
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 128 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
295913
BU SUNG CO LTD
SACHEON-SI
South Korea
AIPS09-01-002
295913
BU SUNG CO LTD
SACHEON-SI
South Korea
QVA-Z10-35-00
PINXTON
United Kingdom
ABP2-1065
PINXTON
United Kingdom
ABP2-1066
PINXTON
United Kingdom
ABP2-2082
PINXTON
United Kingdom
ABP2-2333
PINXTON
United Kingdom
ABP2-3092
PINXTON
United Kingdom
ABP2-3096
PINXTON
United Kingdom
ABP2-3097
PINXTON
United Kingdom
ABP4-5141
PINXTON
United Kingdom
ABP4-5142
PINXTON
United Kingdom
ABP4-5144
PINXTON
United Kingdom
ABP6-3205
PINXTON
United Kingdom
ABP6-5229
PINXTON
United Kingdom
ABP6-5230
PINXTON
United Kingdom
ABP9-1312
145349
145349
145349
145349
145349
145349
145349
145349
145349
145349
145349
145349
145349
145349
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
BULWELL PRECISION
ENGINEERS LTD
Title (PS)
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
FINAL MATERIAL INSPECTION OF
MACHINED METALLIC COMPONENTS
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUFACTURE AND INSPECTION OF
ROLLED THREADS ON
FASTENINGPARTS AND COMPONENTS
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
TESTING BY PENETRANT FLAW
DETECTION
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
AIPI09-01-002
CLEANING WITH LIQUID NON AQUEOS
AGENTS
NO
3 - QUALIFIED
NONE
QVA-Z10-35-00
FINAL MATERIAL INSPECTION OF
MACHINED METALLIC COMPONENTS
NO
3 - QUALIFIED
LIMITED FOR EWB ACTIVITIES FOR
KOREAN AEROSPACE IND. ARP.ID.:
261580
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP2-1065
ABP2-1066
ABP2-2082
ABP2-2333
ABP2-3092
ABP2-3096
ABP2-3097
ABP4-5141
ABP4-5142
ABP4-5144
ABP6-3205
RIVETING WITH BLIND NUT PLATE
RIVETS
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUFACTURE AND INSPECTION OF
ROLLED THREADS ON
FASTENINGPARTS AND COMPONENTS
LOCKING OF FASTENING PARTS
USING TAB WASHERS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
MARKING BY MACHINE ENGRAVING
ABP9-1312
MARKING BY MACHINE ENGRAVING
TBD
3 - QUALIFIED
NONE
145349
BULWELL PRECISION
ENGINEERS LTD
PINXTON
United Kingdom
AIPS03-06-002
LOCKING USING TAB WASHERS
ABP2-3092
LOCKING OF FASTENING PARTS
USING TAB WASHERS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3092 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
145349
BULWELL PRECISION
ENGINEERS LTD
PINXTON
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
145349
BULWELL PRECISION
ENGINEERS LTD
PINXTON
United Kingdom
AIPS03-06-004
LOCKING USING ANAEROBIC
MATERIALS
ABP2-3093
LOCKING OF FASTENING PARTS
USING ANAEROBIC MATERIALS
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3093 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
296207
BURULAN SA
VITORIA
Spain
AIPS01-02-003
YES
3 - QUALIFIED
NONE
296207
BURULAN SA
VITORIA
Spain
AIPS01-02-008
YES
3 - QUALIFIED
NONE
296207
BURULAN SA
VITORIA
Spain
AIPS01-02-013
YES
3 - QUALIFIED
NONE
296207
BURULAN SA
VITORIA
Spain
AIPS01-02-019
YES
3 - QUALIFIED
NONE
296207
BURULAN SA
VITORIA
Spain
AIPS01-02-022
YES
3 - QUALIFIED
ONLY POINT DRIVE FASTENERS
(EN6115 AND ASNA2536)
296207
BURULAN SA
VITORIA
Spain
AIPS01-03-004
YES
3 - QUALIFIED
NONE
296207
BURULAN SA
VITORIA
Spain
AIPS02-01-001
YES
3 - QUALIFIED
NONE
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
INSTALLATION OF HELICOIL
THREADED INSERTS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
296207
BURULAN SA
VITORIA
Spain
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
296207
BURULAN SA
VITORIA
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
296207
BURULAN SA
VITORIA
Spain
AIPS03-03-012
296207
BURULAN SA
VITORIA
Spain
AIPS05-02-003
296207
BURULAN SA
VITORIA
Spain
AIPS05-02-009
296207
296207
296207
296207
BURULAN SA
BURULAN SA
BURULAN SA
BURULAN SA
VITORIA
VITORIA
VITORIA
VITORIA
Spain
Spain
Spain
Spain
AIPS05-02-009
AIPS05-05-001
AIPS05-05-004
AIPS05-05-004
Airbus Qualified Special Process List (External Report)
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
APPLICATION OF EXTERNAL PAINT
SYSTEMS
APPLICATION OF STRUCTURAL
PAINTS
APPLICATION OF STRUCTURAL
PAINTS
SEALING OF AIRCRAFT STRUCTURE
WET INSTALLATION OF FASTENERS
WET INSTALLATION OF FASTENERS
AIPI01-02-003
AIPI01-02-008
AIPI01-02-013
AIPI01-02-019
AIPI01-02-022
AIPI01-03-004
I+D-P-213
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
INSTALLING THREADED CYLINDRICAL
FASTENERS
INSTALLATION OF HELICAL THREADED
INSERTS
ANODIZING OF ALUMINIUM AND
ALUMINIUM ALLOYS
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
I+D-P-202
CHEMICAL CONVERSION FILMS ON
ALUMINIUM AND ITS ALLOYS
YES
3 - QUALIFIED
ONLY VALID TO APPLICATION BY PEN
NA
NOT APPLICABLE
YES
3 - QUALIFIED
ONLY APPLICABLE TO CAN64143
YES
3 - QUALIFIED
ONLY PARTS SMALLER THAN 20 CM
YES
3 - QUALIFIED
NONE
YES
YES
YES
YES
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
NONE
NONE
AIPI05-02-003
I+D-P-064
I+D-P-060
I+D-P-146
I+D-P-146
AIPI05-05-004
APPLICATION OF EXTERNAL PAINT
SYSTEMS
PAINT SYSTEMS FOR METALLIC
DETAIL PARTS AND ASSEMBLIES
PAINT (GENERAL SPECIFICATION)
APPLICATION OF SEALANTS
APPLICATION OF SEALANTS
WET INSTALLATION OF FASTENERS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 129 of 876
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
296207
BURULAN SA
VITORIA
Spain
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
296207
BURULAN SA
VITORIA
Spain
AITM6-1001
NA
NOT APPLICABLE
YES
3 - QUALIFIED
296207
BURULAN SA
VITORIA
Spain
AITM6-6004
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
296207
BURULAN SA
VITORIA
Spain
I+D-E-137
NA
NOT APPLICABLE
NO
3 - QUALIFIED
ALUMINIUM ALLOYS ONLY
296207
BURULAN SA
VITORIA
Spain
I+D-E-140
PENETRANT TESTING
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
PENETRANT INSPECTION PROCESS
ALUMINIUM ALLOY HEAT TREATMENT
INSPECTION BY ELECTRIC
CONDUCTIVITY AND HARDNESS
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
LIMITED TO SURFACE PREPARATION
AND TEMPORARY PROTECTION
ALUMINIUM ALLOYS ONLY
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
External Shop
297138
297138
BWB SURFACE TECHNOLOGY
SRL
BWB SURFACE TECHNOLOGY
SRL
Process Specification(PS) / Process Instruction (PI)
GHIMBAV
GHIMBAV
Romania
Romania
80-T-34-9600
80-T-35-0014
APPLICATION OF SEALING
COMPOUNDS
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
APPLICATION OF SEALING
COMPOUNDS
80-T-34-9600
80-T-35-0014
Couple qualification Status
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
YES
NO
297138
BWB SURFACE TECHNOLOGY
SRL
GHIMBAV
Romania
80-T-35-1101
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
80-T-35-1101
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
YES
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
297138
BWB SURFACE TECHNOLOGY
SRL
GHIMBAV
Romania
80-T-35-2000
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
80-T-35-2000
DC SULPHURIC ACID ANODIZING
WITHOUT SEALING
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
297138
BWB SURFACE TECHNOLOGY
SRL
80-T-35-2010
TARTARIC/SULFURIC ACID ANODIZING
OF ALUMINUM ALLOYS
80-T-35-2010
TARTARIC/SULFURIC ACID ANODIZING
OF ALUMINUM ALLOYS
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PART
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) FOR PARTS
SUPPLIED TO PAS (ARP.ID.: 294150)
3 - QUALIFIED
ONLY INTERMEDIATE MARKING /
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) FOR SUPPLY OF PARTS
TO PAS (ARP-ID.: 294150)
297138
297138
BWB SURFACE TECHNOLOGY
SRL
BWB SURFACE TECHNOLOGY
SRL
297138
BWB SURFACE TECHNOLOGY
SRL
297138
BWB SURFACE TECHNOLOGY
SRL
297138
BWB SURFACE TECHNOLOGY
SRL
297138
BWB SURFACE TECHNOLOGY
SRL
297138
BWB SURFACE TECHNOLOGY
SRL
297138
BWB SURFACE TECHNOLOGY
SRL
Airbus Qualified Special Process List (External Report)
GHIMBAV
GHIMBAV
GHIMBAV
GHIMBAV
GHIMBAV
GHIMBAV
GHIMBAV
GHIMBAV
GHIMBAV
Romania
Romania
Romania
Romania
Romania
Romania
Romania
Romania
Romania
80-T-35-5030
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
80-T-35-5130
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
80-T-35-5218
80-T-35-9023
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
PRESERVATION OF RIVET ROWS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-9123
PAINT COATING IN INTERIOR
FURNISHING
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-39-0132
MARKING WITH INDELIBLE INK
80-T-35-5030
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
80-T-35-5130
COATING WITH TWO/THREECOMPONENT WATER-BASED TOP
COAT
80-T-35-5218
80-T-35-9023
APPLICATION OF ELASTIC
PROTECTIVE COATINGS
PRESERVATION OF RIVET ROWS
80-T-35-9120
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-9123
PAINT COATING IN INTERIOR
FURNISHING
80-T-35-9124
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-39-0132
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
MARKING WITH INDELIBLE INK
TBD
TBD
TBD
YES
YES
YES
TBD
YES
NO
2015-02-02 - Page 130 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
297138
BWB SURFACE TECHNOLOGY
SRL
GHIMBAV
Romania
AIPS02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
AIPI02-01-002
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
297138
BWB SURFACE TECHNOLOGY
SRL
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
GHIMBAV
Romania
YES
297138
BWB SURFACE TECHNOLOGY
SRL
GHIMBAV
Romania
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
AIPI05-02-009
APPLICATION OF STRUCTURAL
PAINTS
YES
3 - QUALIFIED
APPLICATION ON COMPOSITE PARTS
EXCLUDED / LIMITED TO EXTENDED
WORKBENCH ACTIVITIES (SEE
AP2190.0 FOR DEFINITION) OF SMALL
SHEET METALS ALUMINIUM
297138
BWB SURFACE TECHNOLOGY
SRL
GHIMBAV
Romania
AITM6-1001
PENETRANT TESTING
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
297138
BWB SURFACE TECHNOLOGY
SRL
AITM6-6006
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
LIMITED TO EXTENDED WORKBENCH
ACTIVITIES (SEE AP2190.0 FOR
DEFINITION) OF SMALL SHEET METALS
ALUMINIUM
297138
BWB SURFACE TECHNOLOGY
SRL
AITM6-9004
INSPECTION FOR CONFIRMATION OF
THE ANODISING PROCESS (BASED
UPON MEASUREMENT OF SURFACE
RESISTANCE)
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
217722
C & F MILLIER LIMITED
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 06/04/2015
NONE
307128
305909
CADENCE AEROSPACE ADM
OPERATIONS
CAMETOID TECHNOLOGIES
INC
GHIMBAV
GHIMBAV
Romania
Romania
WESTBURY-ON-TRYMUnited Kingdom
BRISTOL
ABP6-3205
NOGALES
Mexico
AIPS01-02-003
MANCHESTER
USA
AIPS02-03-006
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ION VAPOUR DEPOSITION (IVD) OF
ALUMINIUM
AIPI01-02-003
ABP6-3205
AIPI02-03-006
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ALUMINIUM COATING BY ION VAPOUR
DEPOSITION (IVD)
305909
CAMETOID TECHNOLOGIES
INC
MANCHESTER
USA
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 06/04/2015
RESTRICTED TO ALODINE
TREATMENT OF IVD COATINGS
FOLLOWING AIPS 02-03-006
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
ABP0-2017
SUPPLY OF ALUMINIUM PLATE WITH
ULTRASONIC FLAW DETECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
ABP6-5229
TESTING BY MAGNETIC PARTICLE
FLAW DETECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
ABP6-5230
TESTING BY PENETRANT FLAW
DETECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
ABP6-5232
TESTING BY ULTRASONIC FLAW
DETECTION
ABP6-5232
TESTING BY ULTRASONIC FLAW
DETECTION
TBD
3 - QUALIFIED
NONE
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
ABP6-5233
TESTING COMPOSITES BY
ULTRASONIC FLAW DETECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
ABP6-5346
TESTING BY RADIOGRAPHY
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
AITM6-4005
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NDT SERVICES TO THE FAL / TO
AIRBUS MANUFACTURING (A1130)
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
AITM6-4022
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NDT SERVICES TO THE FAL / TO
AIRBUS MANUFACTURING (A1130)
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
AITM6-6003
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NDT SERVICES TO THE FAL / TO
AIRBUS MANUFACTURING (A1130)
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
AITM6-6005
ROTATING PROBE EDDY CURRENT
INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NDT SERVICES TO THE FAL / TO
AIRBUS MANUFACTURING (A1130)
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
AITM6-7002
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
AITM6-7002
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
YES
3 - QUALIFIED
NONE
240964
CAPARO TESTING
TECHNOLOGIES MATERIAL
MEASUREMENTS
REIGATE
United Kingdom
I+D-E-138
RADIOGRAPHIC INSPECTION
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
I+D-P-052
MANUFACTURING OF RESIN
IMPREGNATED GLASS FIBER
REINFORCED PLASTIC
YES
3 - QUALIFIED
MANUAL LAY UP
Airbus Qualified Special Process List (External Report)
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
ULTRASONIC PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
EDDY CURREND INSPECTION TO
DETECT SURFACE CRACKS IN
ELECTRICALLY CONDUCTIVE
MATERIAL
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 131 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
AIPI03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
YES
3 - QUALIFIED
ONLY MANUAL LAY-UP
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
YES
3 - QUALIFIED
ONLY MANUAL LAY-UP
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
AIPS03-07-007
MANUFACTURING OF STRUCTURAL
COMPONENTS FROM
THERMOSETTING PREPREG
MATERIALS
I+D-P-412
REPARACION DE ESTRUCTURAS
FABRICADAS CON MATERIALES
COMPUESTOS (LAMINADOS Y
SANDWICH)
YES
3 - QUALIFIED
NONE
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
I+D-P-412
REPARACION DE ESTRUCTURAS
FABRICADAS CON MATERIALES
COMPUESTOS (LAMINADOS Y
SANDWICH)
YES
3 - QUALIFIED
NONE
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
YES
3 - QUALIFIED
ONLY MANUAL LAY-UP
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
MIX AND APPLICATION OF ADHESIVE
MATERIALS FOR EDGE SEALING OF
CFRP PARTS IAW. I+D-P-146 CHAPTER
8.7 / AITM6-9006 NOT QUALIFIED (NOT
REQUESTED IN REP/CER)
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
AIPI06-01-003
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
YES
3 - QUALIFIED
NONE
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AIPS06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
AIPI06-02-006
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
YES
3 - QUALIFIED
ONLY MANUAL LAY-UP
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AITM6-4002
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS140388
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AITM6-4005
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS140387
306115
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
AITM6-4022
NA
NOT APPLICABLE
YES
3 - QUALIFIED
QCS140377
CARBURES AER&DE AIRPORT
PLANT JEREZ
CARBURES AER&DE AIRPORT
PLANT JEREZ
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
JEREZ DE LA
FRONTERA
JEREZ DE LA
FRONTERA
Spain
AITM6-5003
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
Spain
AITM6-9003
NA
YES
3 - QUALIFIED
NONE
Spain
I+D-E-280
NO
3 - QUALIFIED
QCS140387
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
Spain
I+D-E-282
NO
3 - QUALIFIED
QCS140388
CARBURES AER&DE AIRPORT
PLANT JEREZ
CARBURES AER&DE AIRPORT
PLANT JEREZ
JEREZ DE LA
FRONTERA
JEREZ DE LA
FRONTERA
Spain
I+D-E-294
NO
3 - QUALIFIED
NONE
Spain
I+D-E-336
NOT APPLICABLE
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
TAP TESTING ON BONDED ELEMENTS
AND / OR COMPOSITE STRUCTURES
LEAK TESTING IN SANDWICH
STRUCTURES
NO
3 - QUALIFIED
NONE
306115
306115
306115
306115
306115
306115
212986
212986
212986
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
Airbus Qualified Special Process List (External Report)
Spain
Spain
Spain
ULTRASONIC THROUGH
TRANSMISSION INSPECTION OF FIBRE
COMPOSITE
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
ULTRASONIC
PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
TAP TEST
LEAK TEST FOR SANDWICH
STRUCTURES
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
TAP TESTING ON BONDED ELEMENTS
AND / OR COMPOSITE STRUCTURES
LEAK TESTING IN SANDWICH
STRUCTURES
ILLESCAS
Spain
AIPS01-02-005
ILLESCAS
Spain
AIPS01-02-017
ILLESCAS
Spain
AIPS01-02-017
ILLESCAS
Spain
AIPS03-02-018
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
I+D-E-280
I+D-E-282
I+D-E-294
I+D-E-336
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
3 - QUALIFIED
ONLY PREHOLES. MACHINE USED:
TALADRO OPTIMUM B24H – CSY N°29 –
SERIAL NUMBER: 1807060204.
ROUGHNESS MEASURMENT IS DONE
BY A SUBCONTRACTOR
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
I+D-P-231
FASTENING OF CARBON FIBRE
COMPOSITE STRUCTURES
YES
3 - QUALIFIED
NONE
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 132 of 876
External Shop
ARP-ID
Company Name
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Couple qualification Status
Title (PI)
Special
Process
Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
AIPI03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
YES
3 - QUALIFIED
EXCLUDED:
§6.6 AUTOMATIC TAPE LAYING (ATL)
AND AUTOMATED FIBRE PLACEMENT
(AFP) MACHINES
§6.8 PLIES POSITIONING EQUIPMENT
BY LASER
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS03-02-019
MANUFACTURE OF MONOLITHIC
PARTS WITH THERMOSET PREPREG
MATERIALS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
NONE
3 - QUALIFIED
ONLY ROUGH MILLING WITH MANUAL
PROCESS IS REALISED. FINAL
DIMENSIONS ARE MADE BY
GRINDING.
MACHINE USED: MESA EXUADRADORA
ROBLAND Z320.
ROUGHNESS MEASUREMENT IS DONE
BY A SUBCONTRACTOR
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
AIPS03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
212986
212986
212986
212986
AIPI03-07-002
MACHINING OF FIBRE REINFORCED
PLASTIC (FRP) COMPONENTS
AIPS03-07-007
MANUFACTURING OF STRUCTURAL
COMPONENTS FROM
THERMOSETTING PREPREG
MATERIALS
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
YES
3 - QUALIFIED
THE CUTTING MACHINE IS LIMITED TO
MONOLAYER CUTTING AND TO A
LENGHT NOT BIGGER TO THE
CUTTING MACHINE SURFACE.
Spain
AIPS03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
AIPI03-07-019
FORMING OF THERMOSET PREPREG
MATERIALS
YES
3 - QUALIFIED
AUTOCLAVE FORMING WITH VACUUM
BAG
ILLESCAS
Spain
AIPS03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
AIPI03-08-003
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
YES
3 - QUALIFIED
NON STRUCTURAL REWORK WITH
RESIN INJECTION
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-062
YES
3 - QUALIFIED
NONE
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-393
YES
3 - QUALIFIED
NONE
ILLESCAS
Spain
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
ILLESCAS
Spain
AIPS05-05-004
WET INSTALLATION OF FASTENERS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
ILLESCAS
Spain
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
AIPI05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
YES
3 - QUALIFIED
CAPACITY MEASUREMENT
ACCORDING AITM6-9006 IS NOT DONE
AIPS05-05-009
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(2-013E-212986-AE)
YES
3 - QUALIFIED
NONE
PRESERVATION OF CUT EDGES OF
CARBON FIBRE COMPOSITE PARTS TO
PREVENT GALVANIC CORROSION ON
ATTACHED METAL PARTS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
ONLY WITH ADHESIVE Z15,201
YES
3 - QUALIFIED
NONE
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
INTEGRAL FUEL TANK SEALING AND
PROTECTION
FREEZING, REFRIGERATION STORAGE
AND DEFREEZING OF POLYSULFIDE
SEALANTS
YES
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS05-05-009
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS06-01-003
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS06-02-002
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AIPS06-02-006
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AITM6-3004
VISUAL INSPECTION
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
AITM6-4002
ULTRASONIC THROUGH
TRANSMISSION INSPECTION OF FIBRE
COMPOSITE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
3 - QUALIFIED
NDT METHOD AND NDT TECHNIQUE:
ULTRASONIC PULSE-ECHO CONTACT
HAND-HELD INSPECTION.
• MATERIAL TYPE: CARBON FIBER
M21E/34%/UD194/IMA-12K
• STRUCTURE BUILD UP: PARALLEL
PLANES AND RADII.
• FACILITY: COMPOSYSTEM
• THICKNESS RANGE: 1 - 15 MM
• RADII: > 3
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
Airbus Qualified Special Process List (External Report)
ILLESCAS
ILLESCAS
Spain
Spain
AITM6-4005
SURFACE PREPARATION FOR
THERMOSETTING PARTS BEFORE
STRUCTURAL BONDING
NON-STRUCTURAL ADHESIVE
BONDING
STRUCTURAL BONDING OF
THERMOSET AND THERMOPLASTIC
MATRICES COMPOSITE PARTS
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
I+D-P-233
I+D-P-071
I+D-P-233
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
NON STRUCTURAL BONDINGS
(GENERAL SPECIFICATION)
MANUFACTURING OF CARBON FIBRE
COMPOSITE MATERIAL STRUCTURES (
LAMINATE AND SANDWICH )
NA
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NOT APPLICABLE
YES
2015-02-02 - Page 133 of 876
External Shop
ARP-ID
212986
212986
212986
212986
Company Name
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
Process Specification(PS) / Process Instruction (PI)
City
Country
Ref. No. (PS)
ILLESCAS
Spain
AITM6-4010
ILLESCAS
Spain
AITM6-9003
ILLESCAS
Spain
I+D-E-275
ILLESCAS
Spain
I+D-E-280
Title (PS)
INSPECTION OF FIBRE COMPOSITES
BY ULTRASONIC PHASED ARRAY
TECHNIQUE
LEAK TEST FOR SANDWICH
STRUCTURES
NON - DESTRUCTIVE INSPECTION OF
CARBON FIBER COMPOSITE PARTS
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
COMPOSITE
THROUGH - TRANSMISSION
ULTRASONIC INSPECTION OF CARBON
FIBER COMPOSITE PARTS
Ref. No. (PI)
Couple qualification Status
Title (PI)
Special
Process
Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
NDT METHOD AND NDT TECHNIQUE:
ULTRASONIC PUSE-ECHO SEMI
AUTOMATIC INSPECTION.
• MATERIAL TYPE: CARBON FIBER
M21E/34%/UD194/IMA-12K
• STRUCTURE BUILD UP: PARALLEL
PLANES AND RADII, THICKNESS
RANGE: 1 - 15 MM, RADII: > 3
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
I+D-E-282
212986
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
ILLESCAS
Spain
I+D-E-295
REFERENCE STANDARD FOR NONDESTRUCTIVE INSPECTION OF
CARBON FIBRE COMPOSITES
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ILLESCAS
Spain
I+D-P-146
APPLICATION OF SEALANTS
I+D-P-146
APPLICATION OF SEALANTS
YES
3 - QUALIFIED
None
AP32145-E
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
SOUDAGE MANUEL UNIQUEMENT
3 - QUALIFIED
RIVETAGE MULTIFRAPPE ET AU CÉ DE
RIVETS EN ALLIAGE D’ALUMINIUM
DIAM ≤ 4,8 MM ET DE RIVETS
MONEL DIAM ≤ 3.2 MM POUR DES
PIÈCES DE CLASSE 3 ET 2S AVEC
INTERPOSITION DE MASTIC PR1776B2
ILLESCAS
Spain
I+D-P-348
287450
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CARBURES AEROSPACE &
DEFENSE S A UNIPERSONAL
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
80-T-36-1010
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0025
PROCESS FOR FASTENERS
INSTALLATION ON UNCURED
INTERFAY SEALANT
NO_AIRBUS_PI
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0071
PAINTING OF DETAIL METALLIC PARTS
AIPI05-02-009
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0074
GENERAL REQUIREMENTS ON
WELDING ( ALL MATERIALS )
NO_AIRBUS_PI
212986
212986
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
APPLICATION OF LIQUID RELEASE
AGENTS
HEAT TREATMENT OF ALUMINIUM
ADET0078
STRUCTURAL RIVETING
I+D-P-348
80-T-36-1010
APPLICATION OF LIQUID RELEASE
AGENTS
HEAT TREATMENT OF ALUMINIUM
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(PQDA_CASAAEROSLICOM_ASSEMBLY
_19042012)
APPLICATION OF STRUCTURAL
PAINTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF73-02-STQ-10 PART 502
VERS A0)
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TWPY/CA/04-2009)
NO_AIRBUS_PI
YES
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0082
APPLICATION OF SEALANTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TWPY/CA/04-2009)
YES
3 - QUALIFIED
RIVETAGE MULTIFRAPPE ET AU CÉ DE
RIVETS EN ALLIAGE D’ALUMINIUM
DIAM ≤ 4,8 MM ET DE RIVETS
MONEL DIAM ≤ 3.2 MM POUR DES
PIÈCES DE CLASSE 3 ET 2S AVEC
INTERPOSITION DE MASTIC PR1776B2
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0091
SULFURIC - ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF-R5.01-57)
YES
3 - QUALIFIED
RESTRICTED TO ALUMINIUM 2000
SERIES
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF83-11-STQ-10 PART 502
VERS A0)
YES
3 - QUALIFIED
TYPE 3 ET 4 UNIQUEMENT
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
SOUDAGE MANUEL UNIQUEMENT
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0114
ELECTRICAL BONDING PROCESSES
NO_AIRBUS_PI
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0187
WET INSTALLATION OF FASTENERS
IPDA77-01
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
ADET0203
TIG WELDING
NO_AIRBUS_PI
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(PQDA_GZFD-CAS_OAC_CCC_PEINT140911)
YES
3 - QUALIFIED
NONE
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF-R5.01-57)
YES
3 - QUALIFIED
LINE 10 : NO LIMITATION
LINE 100: NO LIMITATION
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-01-003
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-02-002
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
DRY BLASTING
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-04-002
ELECTROLYTIC CADMIUM PLATING
Airbus Qualified Special Process List (External Report)
DEFROSTING - APPLICATION OF
SEALANTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(DCP PSCA 004/08 IND A)
AIPI02-02-002
NO_AIRBUS_PI
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
DRY BLASTING
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF-R5.01-69 IND A)
# NO FATIGUE CRITICAL PARTS
# STEEL PARTS ONLY
2015-02-02 - Page 134 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
3 - QUALIFIED
IMMERSION PROCESS FOR ALL
ALLOYS :
LOCAL APPLICATION PROCESS ON
2000 SERIES ALLOYS
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
AIPI02-05-005
YES
3 - QUALIFIED
AUSTENITIC AND MARTENSITIC
STEELS
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS04-00-000
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
NO_AIRBUS_PI
YES
3 - QUALIFIED
NONE
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(DCP SCA 001/08 IND)
YES
3 - QUALIFIED
TREMPE ET RECUIT SUR PIÈCES EN
ALLIAGE D’ALUMINIUM
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
AIPI04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
YES
3 - QUALIFIED
AIPI05-02-009
NA
APPLICATION OF STRUCTURAL
PAINTS
NOT APPLICABLE
YES
YES
3 - QUALIFIED
3 - QUALIFIED
HEAT TREATMENT OF ALUMINIUM
ALLOYS: SOLUTION HEAT TREAMENT,
ARTIFICIAL AGEING AND TOTAL
ANNAELING
NONE
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 03/02/2015
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
PASSIVATION OF CORROSION
RESISTANT STEEL
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IF-R5.02-01 IND D)
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS04-01-001
287450
287450
CASABLANCA AERONAUTIQUE
CASABLANCA AERONAUTIQUE
CASABLANCA
CASABLANCA
Morocco
Morocco
AIPS05-02-009
AITM6-1001
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AITM6-6004
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AITM6-6006
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AITM6-7002
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AITM6-9004
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AITM6-9008
ELECTRICAL BONDING: MEASURE
RESISTANCE OF ELECTRICAL
BONDING POINTS
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
EN2004-1
Electrical Conductivity
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(IC-R5-05-05)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 03/02/2015
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 28/02/2015
ONLY AUTHORIZED FOR CUTTING,
DEBURRING AND CLEANING OF
TUBING MATERIAL I.A.W. AIPI03-01-010.
NOT AUTHORIZED FOR BENDING
WHICH IS PERFORMED BY TIER 1
(AEROLIA).
NO
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
APPLICATION OF STRUCTURAL
PAINTS
PENETRANT TESTING
FOR INSPECTION PROCESSES
DETERMINATION OF ELECTRICAL
CONDUCTIVITY OF ALUMINIUM
ALLOYS BY EDDY CURRENT METHOD
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
INSPECTION FOR CONFIRMATION OF
THE ANODISING PROCESS (BASED
UPON MEASUREMENT OF SURFACE
RESISTANCE)
204341
CASTLE METALS FRANCE
MONTOIR-DEBRETAGNE
France
AIPS03-01-010
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
80-T-30-4010
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
80-T-30-9910
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
80-T-35-5702
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
80-T-39-0501
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
ABP2-1072
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-1072
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-2073
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-2074
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-2075
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-2079
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-2082
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-2087
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
3 - QUALIFIED
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
3 - QUALIFIED
NONE
Airbus Qualified Special Process List (External Report)
MANUFACTURING OF PIPES
MACHINING OF METALLIC
COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
PRESERVATION FOR INTERMEDIATE
STORAGE
PREVENTION OF CORROSION DURING
PRODUCTION
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
AIPI03-01-010
80-T-30-4010
80-T-30-9910
80-T-35-5702
80-T-39-0501
ABP2-1072
ABP2-1072
ABP2-2073
ABP2-2074
ABP2-2075
ABP2-2079
ABP2-2082
ABP2-2087
MANUFACTURING OF PIPES
MACHINING OF METALLIC
COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
PRESERVATION FOR INTERMEDIATE
STORAGE
PREVENTION OF CORROSION DURING
PRODUCTION
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
MANUAL FASTENING WITH POINT
DRIVE BOLTS
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
MANUAL FASTENING WITH PULL TYPE
LOCK BOLTS
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 135 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
3 - QUALIFIED
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
3 - QUALIFIED
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
3 - QUALIFIED
APPROVED FOR THE 'TOUCH UP' OF
LOCK BOLT COLLARS AND RIVET
HEADS / TAILS ONLY.
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP4-2126
YES
3 - QUALIFIED
APPROVED FOR STENCILING ONLY.
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP4-5141
YES
3 - QUALIFIED
NONE
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
ABP4-5142
YES
3 - QUALIFIED
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP4-5142
YES
3 - QUALIFIED
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP4-5144
YES
3 - QUALIFIED
NONE
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
ABP6-3205
YES
3 - QUALIFIED
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP6-3205
YES
3 - QUALIFIED
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP6-5230
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP7-1245
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
ABP7-1246
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-003
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
AIPI01-02-013
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-015
INSTALLATION OF BLIND BOLTS
THREADED TYPE
ABP2-2073
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-017
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
146629
CAV AEROSPACE LIMITED
LEICESTER
189262
CAV AEROSPACE LIMITED
189262
189262
189262
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
TESTING BY PENETRANT FLAW
DETECTION
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
ABP4-2126
ABP4-5141
ABP4-5142
ABP4-5142
ABP4-5144
ABP6-3205
ABP6-3205
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP7-1245
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
MANUAL FASTENING WITH SELF
LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2073 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
LLANTRISANT
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2075
MANUAL FASTENING WITH SHORT
THREAD POINT DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2075 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2074
MANUAL FASTENING WITH POINT
DRIVE BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2074 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
LIMITED APPROVAL TO CARRY OUT
MACHINING OF COUNTERBORE IAW
TABLE 1 OF THE AIPI
CAV AEROSPACE LIMITED
Airbus Qualified Special Process List (External Report)
LLANTRISANT
United Kingdom
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP7-1246
AIPI01-02-003
ELECTRICAL BONDING AND EARTHING
FOR AIRBUS REQUIREMENTS DURING
ASSEMBLY
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
INSTALLATION OF BLIND BOLTS PULLTYPE
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTERNERS
AIPS01-03-002
AIPI01-03-002
WITH ODER WITHOUT ACRES
SLEEVES
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
MANUAL FASTENING OF 2- OR 4START QUICK RELEASE FASTENERS
WITH OR WITHOUT ACRES SLEEVES
2015-02-02 - Page 136 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
NONE
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
WET INSTALLATION OF FASTENERS
AIPI05-05-004
WET INSTALLATION OF FASTENERS
YES
3 - QUALIFIED
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
LLANTRISANT
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS08-03-002
NO
3 - QUALIFIED
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS09-01-002
NO
3 - QUALIFIED
NONE
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
80-T-30-4010
NO
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
NONE
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
80-T-30-9910
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
CONSETT
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS02-04-001
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
AIPI02-04-001
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS03-11-001
MACHINING OF METALLICS
AIPI03-11-001
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS03-11-003
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS05-05-001
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
SEALING OF AIRCRAFT STRUCTURE
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
189262
CAV AEROSPACE LIMITED
LLANTRISANT
United Kingdom
AIPS05-05-004
146629
CAV AEROSPACE LIMITED
LEICESTER
United Kingdom
189262
CAV AEROSPACE LIMITED
LLANTRISANT
189262
CAV AEROSPACE LIMITED
146629
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
Airbus Qualified Special Process List (External Report)
AIPI03-11-003
AIPI05-05-001
Title (PI)
APPLICATION OF CORROSION
PREVENTIVE TEMPORARY
PROTECTIVE COMPOUNDS
MACHINING METALS BY MECHANICAL
ACTION
DEBURRING AND MANUAL REWORK
OF METALLIC COMPONENTS
SEALING OF AIRCRAFT STRUCTURE
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON
AQUEOUS AGENTS INCLUDING
VAPOUR PHASE
MACHINING OF METALLIC
COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
AIPI08-03-002
80-T-35-0020
ALKALINE CLEANING
80-T-35-0020
ALKALINE CLEANING
NO
United Kingdom
80-T-35-0090
RINSING
80-T-35-0090
RINSING
TBD
CONSETT
United Kingdom
80-T-35-0095
WATER QUALITY
80-T-35-0095
WATER QUALITY
TBD
CONSETT
United Kingdom
80-T-35-0100
CONSETT
United Kingdom
80-T-35-1101
CONSETT
United Kingdom
80-T-35-5002
CONSETT
United Kingdom
80-T-35-5106
CONSETT
United Kingdom
80-T-35-5702
CONSETT
United Kingdom
80-T-35-9120
CONSETT
United Kingdom
80-T-35-9124
CONSETT
United Kingdom
80-T-39-0501
CONSETT
United Kingdom
ABP1-1023
CONSETT
United Kingdom
ABP1-2035
COLD WORKING OF HOLES
ABP1-2035
CONSETT
United Kingdom
ABP1-2344
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
ABP1-2344
CONSETT
United Kingdom
ABP1-3038
CONSETT
United Kingdom
ABP1-4327
CONSETT
United Kingdom
ABP1-5057
CONSETT
United Kingdom
ABP2-1065
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COAT
PRESERVATION FOR INTERMEDIATE
STORAGE
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
PREVENTION OF CORROSION DURING
PRODUCTION
CHROMIC ACID ANODISING OF
ALUMINIUM
DEPOSITION OF ZINC BY SPRAYING
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
AIPI09-01-002
80-T-30-4010
80-T-30-9910
80-T-35-0100
80-T-35-1101
80-T-35-5002
80-T-35-5106
80-T-35-5702
80-T-35-9120
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON AQUEOS
AGENTS
MACHINING OF METALLIC
COMPONENTS
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
ACIDIC PICKLING OF ALUMINUM AND
ALUMINUM ALLOYS
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
COATING WITH TWO-COMPONENT
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COAT
PRESERVATION FOR INTERMEDIATE
STORAGE
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-39-0501
ABP1-1023
ABP1-3038
ABP1-4327
ABP1-5057
ABP2-1065
NONE
NONE
NONE
3 - QUALIFIED
LIMITED TO REWORKS BY ALODINE
PEN
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
COLD WORKING OF HOLES
YES
3 - QUALIFIED
NONE
CLEANING AND SURFACE
IMPROVEMENT BY BLASTING
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
PREVENTION OF CORROSION DURING
PRODUCTION
CHROMIC ACID ANODISING OF
ALUMINIUM
DEPOSITION OF ZINC BY SPRAYING
COATING OF BOLTS AND FASTENERS
WITH LUBRICANT PRIOR TO
FASTENING
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND NUT PLATE
RIVETS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
NONE
YES
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-9120
NO
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
2 - AUTHORISATION TO
PROCEED UNTIL 31/03/2015
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NONE
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
2015-02-02 - Page 137 of 876
External Shop
ARP-ID
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
135006
Company Name
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
Process Specification(PS) / Process Instruction (PI)
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
CONSETT
United Kingdom
ABP2-1066
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
ABP2-1066
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP2-1067
RIVETING WITH BLIND RIVETS
ABP2-1067
RIVETING WITH BLIND RIVETS
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP2-1068
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP2-1069
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP2-1071
TBD
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP2-1072
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP2-1347
CONSETT
United Kingdom
ABP2-2076
CONSETT
United Kingdom
ABP2-2080
CONSETT
United Kingdom
ABP2-2082
CONSETT
United Kingdom
ABP2-2083
CONSETT
United Kingdom
ABP2-2084
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP2-2087
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP2-2336
CONSETT
United Kingdom
ABP2-2337
CONSETT
United Kingdom
ABP2-3096
CONSETT
United Kingdom
ABP2-3097
CONSETT
United Kingdom
ABP3-1118
CONSETT
United Kingdom
ABP3-1119
CONSETT
United Kingdom
ABP3-1120
CONSETT
United Kingdom
ABP4-1121
135006
135006
135006
135006
135006
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP4-1123
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP4-1352
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP4-2124
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP4-2126
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
135006
135006
135006
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
Airbus Qualified Special Process List (External Report)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
City
135006
135006
Couple qualification Status
CONSETT
United Kingdom
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL RIVETING OF ALUMINIUM
STRUCTURE WITH SLUG RIVETS
(LVER HAND GUNS) INTO DOUBLE
COUNTERSINK HOLES
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH BLIND
BOLTS ( JO-BOLTS )
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF RIVETS PRIOR
TO RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
CONSETT
United Kingdom
ABP4-2128
CONSETT
United Kingdom
ABP4-2130
CONSETT
United Kingdom
ABP4-2131
CONSETT
United Kingdom
ABP4-2133
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
ABP2-1068
ABP2-1069
ABP2-1071
ABP2-1072
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MILLING THE HEADS OF RIVETS AFTER
RIVETING
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL RIVETING OF ALUMINIUM
STRUCTURE WITH SLUG RIVETS
(LVER HAND GUNS) INTO DOUBLE
COUNTERSINK HOLES
ABP2-1347
ABP2-2076
ABP2-2080
ABP2-2082
ABP2-2083
ABP2-2084
ABP2-2087
ABP2-2336
ABP2-2337
ABP2-3096
ABP2-3097
ABP3-1118
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH BLIND
BOLTS ( JO-BOLTS )
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
MANUAL FASTENING INTO PARALLEL
INTERFERENCE FIT HOLES
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF RIVETS PRIOR
TO RIVETING
ABP3-1119
ABP3-1120
ABP4-1121
ABP4-1123
ABP4-1352
ABP4-2124
ABP4-2126
ABP4-2130
ABP4-2131
ABP4-2133
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF BONDING PRIMER AS
EROSION RESISTANT COATING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF CHROMATE-FREE
PRIMER AS A SEALING COAT FOR A380
WING TRANSPORTATION
APPLICATION OF ABRASION
RESISTANT PAINT
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF HIGH TEMPERATURE
STOVE ENAMEL PAINT TO STEELS
APPLICATION OF EROSION RESISTANT
PAINT
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 138 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP4-3135
YES
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP4-3138
NO
3 - QUALIFIED
NONE
CONSETT
United Kingdom
ABP4-3350
CONSETT
United Kingdom
ABP4-4140
CONSETT
United Kingdom
ABP4-5141
CONSETT
United Kingdom
ABP4-5142
CONSETT
United Kingdom
ABP4-5144
CONSETT
United Kingdom
ABP5-1149
CONSETT
United Kingdom
ABP5-1162
135006
135006
135006
135006
135006
135006
135006
135006
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP6-3201
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP6-3202
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
ABP6-3204
CONSETT
United Kingdom
ABP6-3205
CONSETT
United Kingdom
ABP6-5224
CONSETT
United Kingdom
ABP6-5226
CONSETT
United Kingdom
ABP6-5230
135006
135006
135006
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
APPLICATION OF PINHOLE FILLER
STRIPPING OF PAINTS BY CHEMICAL
METHODS
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING WITH TWO PART
ACRYLIC
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
RECTIFICATION OF SCRATCHES ON
AN ALUMINIUM CLAD SURFACE
DURING FABRICATION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
HARDNESS TESTING OF METALLIC
MATERIALS
TESTING BY PENETRANT FLAW
DETECTION
ABP4-3135
ABP4-3138
APPLICATION OF FILLER TO SMALL
HOLES
APPLICATION OF EPOXY FILLER TO
HOLES
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
ABP4-5141
ABP4-5142
ABP4-5144
ABP5-1149
ABP5-1162
ABP6-3201
ABP6-3202
ABP6-3204
ABP6-3205
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING WITH TWO PART
ACRYLIC
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
RECTIFICATION OF SCRATCHES ON
AN ALUMINIUM CLAD SURFACE
DURING FABRICATION
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
TBD
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS01-02-002
INSTALLATION OF TAPER SHANK
BOLTS
ABP2-2083
MANUAL FASTENING WITH TAPERED
SHANK BOLTS ( TAPER LOK )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2083 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS01-02-013
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
ABP2-2337
MANUAL FASTENING WITH SINGLE
ACTION LOCKING BLIND BOLTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2337 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
ABP2-2082
SHRINK FITTING OF BOLTS BUSHES
PINS AND OTHER FASTENING PARTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2082 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
ABP1-1023
CHROMIC ACID ANODISING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-1023 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS02-02-005
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
ABP1-2035
COLD WORKING OF HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-2035 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
ABP6-3204
RECTIFICATION OF SCRATCHES ON
AN ALUMINIUM CLAD SURFACE
DURING FABRICATION
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3204 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS03-06-003
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 139 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS03-10-011
HARD METAL FORMING - GENERAL
REQUIREMENTS
ABP6-3202
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3202 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2364
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATE-FREE PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2364 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2124
APPLICATION OF ABRASION
RESISTANT PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2124 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2127
APPLICATION OF FLEXIBLE FINISH
PAINT SCHEME INCORPORATING A
CHROMATED PRIMER TO AN
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2127 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3135
APPLICATION OF FILLER TO SMALL
HOLES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3135 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-3350
APPLICATION OF PINHOLE FILLER
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-3350 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2130
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2130 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-02-013
APPLICATION OF ANTI-EROSION PAINT
ABP4-2133
APPLICATION OF EROSION RESISTANT
PAINT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2133 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1162
ADHESIVE BONDING WITH TWO PART
ACRYLIC
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1162 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1149
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1149 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 140 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Title (PS)
Title (PI)
Special
Process
Status
NA
NOT APPLICABLE
YES
3 - QUALIFIED
NONE
ABP1-3038
ABP1-5057
DEPOSITION OF ZINC BY SPRAYING
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
YES
YES
3 - QUALIFIED
3 - QUALIFIED
NONE
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
YES
3 - QUALIFIED
NONE
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
3 - QUALIFIED
NONE
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
Company Name
City
Country
Ref. No. (PS)
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
AITM6-6006
287197
287197
CAV AEROSPACE LTD SP ZO O
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
NOWA DEBA
Poland
Poland
ABP1-3038
ABP1-5057
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-1066
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-1067
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-1068
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-1069
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-1072
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-2076
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-2078
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-2087
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-2336
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-3096
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP2-3097
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP3-1119
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP3-1120
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP4-1123
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP4-2125
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
ABP4-2125
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP4-2128
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP4-5141
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP4-5142
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP4-5144
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP5-1149
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP5-1162
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP5-1351
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP6-3201
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP6-3202
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP6-3205
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP6-4221
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP6-5224
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
ABP9-4324
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS01-02-003
Airbus Qualified Special Process List (External Report)
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING WITH TWO PART
ACRYLIC
SURFACE PREPARATION PRIOR TO
APPLICATION OF PAINTS
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
TESTING OF ALUMINIUM ALLOYS BY
ELECTRICAL CONDUCTIVITY
CONTROL OF MARKING
SPECIFICATIONS
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
ARP-ID
MEASURING COATING THICKNESS BY
EQUIPMENTS OF THE MAGNETIC AND
EDDY CURRENT TYPE
DEPOSITION OF ZINC BY SPRAYING
CONVERSION COATING OF
ALUMINIUM
RIVETING WITH BLIND STEM LOCK
RIVETS ( AVDEL )
RIVETING WITH BLIND RIVETS
RIVETING WITH BLIND RIVETS (
CHOBERT )
RIVETING WITH BLIND FLUSH BREAK
RIVETS ( AVDEL MBC )
MANUAL RIVETING WITH PRE-FORMED
SOLID RIVETS
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( CAMLOC )
MANUAL FASTENING WITH QUICK
RELEASE FASTENERS ( DZUS )
FASTENING OF JOINTS
CONTAININGSEALANT BY TORQUE
TIGHTENING
Couple qualification Status
ABP2-1066
ABP2-1067
ABP2-1068
ABP2-1069
ABP2-1072
ABP2-2076
ABP2-2078
ABP2-2087
ABP2-2336
ABP2-3096
ABP2-3097
ABP3-1119
ABP3-1120
ABP4-1123
ABP4-5141
ABP4-5142
ABP4-5144
ABP5-1149
ABP5-1162
ABP5-1351
ABP6-3201
ABP6-3202
ABP6-3205
ABP6-4221
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
LOCKING OF FASTENING PARTS
USING WIRELOCKING
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
HEAT TREATMENT OF ALUMINIUM
REFRIGERATED STORAGE OF
ALUMINIUM AFTER HEAT TREATMENT
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
ADHESIVE BONDING WITH TWO PART
ACRYLIC
SURFACE PREPARATION PRIOR TO
APPLICATION OF PAINTS
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT
ALUMINIUM
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
ABP9-4324
CONTROL OF MARKING
SPECIFICATIONS
TBD
3 - QUALIFIED
NONE
ABP6-3205
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3205 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 141 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Special
Process
Status
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3097 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
NONE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-2336 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
CONVERSION COATING OF
ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP1-5057 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPI03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM AND ALUMINIUM ALLOYS
ON EXTERNAL SURFACES
YES
3 - QUALIFIED
LIMITED TO UNCLAD PARTS
LOCKING USING WIRE
ABP2-3096
LOCKING OF FASTENING PARTS
USING WIRELOCKING
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP2-3096 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
AIPS03-10-011
HARD METAL FORMING - GENERAL
REQUIREMENTS
ABP6-3202
GENERAL INSTRUCTIONS FOR THE
FABRICATION OF WROUGHT TITANIUM
NO
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-3202 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Poland
AIPS04-01-001
HEAT TREATMENT OF ALUMINIUM
ALLOYS PARTS
ABP3-1119
HEAT TREATMENT OF ALUMINIUM
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP3-1119 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NOWA DEBA
Poland
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
ABP4-2125
APPLICATION OF ANTI-STATIC PAINT
TO COMPOSITES EXCLUDING CARBON
FIBRE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2125 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NOWA DEBA
Poland
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS01-02-003
PREPARATION OF HOLES IN METALLIC
MATERIALS FOR FASTENING
ABP2-3097
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS01-02-008
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS01-02-013
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS01-02-017
GENERAL ASSEMBLY AND
INSTALLATION OF FASTENERS
ABP2-2336
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
AIPI01-02-019
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS01-02-022
INSTALLATION OF PARALLEL SHANK
THREADED FASTENERS
ABP2-2336
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS02-05-001
CHEMICAL CONVERSION COATING
ABP1-5057
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS03-06-003
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
287197
CAV AEROSPACE LTD SP ZO O
287197
CAV AEROSPACE LTD SP ZO O
TORQUE TIGHTENING OF SCREWS,
BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
AIPI01-02-008
AIPI01-02-013
Title (PI)
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
TIGHTENING TORQUES FOR
STRUCTURAL FASTENERS
INSTALLATION OF BLIND BOLTS PULLTYPE
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
INSTALLATION OF BUSHES SHRINK
AND PRESS FIT
COMMON REQUIREMENTS FOR
INSTALLING BOLTS, STUDS, NUTS AND
OTHER FASTENING PARTS.
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-2126
APPLICATION OF POLYURETHANE
FINISH PAINTS TO AN INTERNAL OR
EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2126 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
ABP4-1123
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-1123 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-001
SEALING OF AIRCRAFT STRUCTURE
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
ABP4-2128
APPLICATION OF POLYURETHANE
PAINTS AND VARNISHES FOR
OVERCOATING OF SEALANTS AND
PART MARKINGS AND FOR
IDENTIFICATION PURPOSES
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-2128 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-003
SURFACE PROTECTION OF
FASTENERS AND SEALANTS BY
APPLICATION OF VARNISH
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-004
WET INSTALLATION OF FASTENERS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-005
PROCESS FOR THE MANUFACTURE
OF FORM-IN-PLACE SEALS USING
SEALANT
ABP6-4221
MANUFACTURE OF FORM-IN-PLACE
SEALS USING SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP6-4221 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-006
APPLICATION OF NON HARDENING
JOINTING COMPOUNDS
ABP4-5144
APPLICATION OF NON-HARDENING
JOINTING COMPOUNDS AS SEALANT
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5144 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5141
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5141 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 142 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS05-05-008
APPLICATION OF LOW ADHESION
SEALANTS
ABP4-5142
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP4-5142 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1162
ADHESIVE BONDING WITH TWO PART
ACRYLIC
YES
9 - LIMITED SCOPE (AIPS00-00006)
ABP5-1162 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS06-02-002
NON-STRUCTURAL ADHESIVE
BONDING
ABP5-1149
ADHESIVE BONDING WITH TWO PART
EPOXY.( HYSOL AND 3M )
YES
9 - LIMITED SCOPE (AIPS00-00006)
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS07-01-006
ELECTRICAL BONDING
AIPI07-01-006
ELECTRICAL BONDING
YES
3 - QUALIFIED
287197
CAV AEROSPACE LTD SP ZO O
NOWA DEBA
Poland
AIPS09-04-001
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
ABP5-1351
SURFACE PREPARATION PRIOR TO
APPLICATION OF PAINTS
YES
9 - LIMITED SCOPE (AIPS00-00006)
146725
CAZENAVE
SERRES CASTET
France
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-07-IP2-140-A0)
YES
3 - QUALIFIED
NONE
146725
CAZENAVE
SERRES CASTET
France
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-07-IP2-140-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0173 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
YES
3 - QUALIFIED
VAL ALU SERIE 2000 ET 7000
ABP5-1149 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
LIMITED TO CLASS 2 AND 3 PARTS
ABP5-1351 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
146759
CCA CAVONE
BASTELICAAIA
France
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-154-A0;
QUALIF62-ST03-STQ-07-IP2-154-A0)
146759
CCA CAVONE
BASTELICAAIA
France
ADET0079
CHROMATING TREATMENT FOR
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-05-IP2-154-A0)
YES
3 - QUALIFIED
NONE
146759
CCA CAVONE
BASTELICAAIA
France
ADET0084
SULFURIC - ACID ANODIZING OF
TITANIUM AND TITANIUM ALLOYS (
EXCEPT FASTENERS )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-ST03-STQ-07-IP2-154-A0)
YES
3 - QUALIFIED
NONE
146759
CCA CAVONE
BASTELICAAIA
France
ADET0173
INSTALLATION OF TIGHT FIT BUSHES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-05-IP2-154-A0)
YES
3 - QUALIFIED
NONE
146759
CCA CAVONE
BASTELICAAIA
France
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
068.2839/98
ATTESTATION OF PROCESS
QUALIFICATION
YES
3 - QUALIFIED
SERIE 2000
146759
CCA CAVONE
BASTELICAAIA
France
ADET0201
EXPANSION BUSHING INSTALLATION
IN METALLIC WITH BUSHLOC
PROCESS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF45-08-STQ-05-IP2-154-A0)
TBD
3 - QUALIFIED
NONE
146759
CCA CAVONE
BASTELICAAIA
France
AIPS01-02-019
INSTALLATION OF BUSHES, SHRINK
AND PRESS FIT
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF75-05-STQ-05-IP2-154-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0173 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
146759
CCA CAVONE
BASTELICAAIA
France
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-154-A0)
YES
3 - QUALIFIED
VAL ALU SERIE 2000 ET 7000
146759
CCA CAVONE
BASTELICAAIA
France
AIPS02-01-004
ANODIZING OF TITANIUM AND ITS
ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-ST03-STQ-07-IP2-154-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0084 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
146759
CCA CAVONE
BASTELICAAIA
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-21-STQ-05-IP2-154-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0079 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
APPLICATION OF STRUCTURAL
PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-02-STQ-07-IP2-154-A0;
QUALIF62-ST03-STQ-07-IP2-154-A0)
YES
VAL ALU SERIE 2000 ET
9 - LIMITED SCOPE (AIPS00-00- 7000ADET0071 SCOPE & LIMITATIONS
006)
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
NA
NOT APPLICABLE
NO
3 - QUALIFIED
NONE
IPDA76-03
MANUFACTURE OF NON-METALLIC
HONEYCOMB SANDWICH COMPOSITE
ITEMS
YES
3 - QUALIFIED
WP AND PARTS DELIVERED TO CCA
AJACCIO ONLY
146759
CCA CAVONE
BASTELICAAIA
France
AIPS05-02-009
146759
CCA CAVONE
BASTELICAAIA
France
IGC04-25-120
146759
CCA CAVONE
BASTELICAAIA
France
IGC04-63-100
146759
CCA CAVONE
BASTELICAAIA
France
IGC04-63-111
300674
CCA CORSE COMPOSITES
AERONAUTIQUES
FOUCHANA
Tunisia
ADET0150
300768
CENTRA INDUSTRIES INC
CAMBRIDGE
Canada
80-T-30-4010
300768
CENTRA INDUSTRIES INC
CAMBRIDGE
Canada
80-T-30-6918
300768
CENTRA INDUSTRIES INC
CAMBRIDGE
Canada
80-T-35-0014
300768
CENTRA INDUSTRIES INC
CAMBRIDGE
Canada
80-T-35-5702
300768
CENTRA INDUSTRIES INC
Airbus Qualified Special Process List (External Report)
CAMBRIDGE
Canada
80-T-39-0132
INSTRUCTIONS FOR INSPECTIONS BY
ELECTRICAL CONDUCTIVITY (EDDY
CURRENTS)
QUALIFICATION OF HEAT TREATMENT
AND CURING INSTALLATIONS
HEAT TREATEMENT OF ALUMINIUM
ALLOYS - INSPECTION OF
OPERATIONS AND OF PARTS
CARRYING OUT COMPOSITE
ELEMENTS IN PREPREGS HYBRID
GLASS CARBON FABRIC OR ARAMID
FABRIC WITH EPOXY RESIN 120°C
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
PRESERVATION FOR INTERMEDIATE
STORAGE
80-T-30-4010
80-T-30-6918
80-T-35-0014
80-T-35-5702
MACHINING OF METALLIC
COMPONENTS
FINISHING OF METAL COMPONENTS
(DEBURRING, CLEANING)
CLEANING WITH ORGANIC SOLVENTS
(COLD CLEANING AGENTS)
PRESERVATION FOR INTERMEDIATE
STORAGE
MARKING WITH INDELIBLE INK
80-T-39-0132
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
MARKING WITH INDELIBLE INK
NO
NO
2 - AUTHORISATION TO
PROCEED UNTIL 30/04/2015
2 - AUTHORISATION TO
PROCEED UNTIL 30/04/2015
NONE
NONE
NO
3 - QUALIFIED
NONE
TBD
3 - QUALIFIED
NONE
NO
2 - AUTHORISATION TO
PROCEED UNTIL 30/04/2015
NONE
2015-02-02 - Page 143 of 876
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0007
MORTICE AND TENON JOINT OF
COMPOSITE STRUCTURES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF72-ST02-STQ-07-IP2-038-A1)
YES
3 - QUALIFIED
MAXIMUM APPLICABLE TORQUE IN
PRODUCTION 0.48 M.DAN
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0010
ANTI-SKID PAINT APPLICATION INSIDE
AIRCRAFT
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-ST01-STQ-04- IP2-038-A0)
YES
3 - QUALIFIED
NONE
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0092
PAINTING FOR DETAIL PARTS IN
COMPOSITE MATERIALS ( EXCEPT
FURNISHING CABIN INTERIOR )
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(72MP113 ISSUE C)
YES
3 - QUALIFIED
RESTRICTED TO STGP298 (KARMANS
ATR42&72) - NCF N°DA18/11
VALIDATED ON AUGUST 30TH 2011
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0096
STRUCTURE TYPE CARBON
COMPOSITE FLOOR
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF48-ST05-STQ-05-IP2-038-A0)
TBD
3 - QUALIFIED
SANDWICH NIDA NOMEX ET N636
UNIQUEMENT
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0148
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-10-STQ-04-IP2-038)
TBD
3 - QUALIFIED
AMÉNAGEMENT COCKPIT
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0149
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-08-STQ-04-IP2-038-A1)
TBD
3 - QUALIFIED
AMÉNAGEMENT COCKPIT
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(72MP116 ISSUE C)
YES
3 - QUALIFIED
RESTRICTED TO ALODINE 1200 ON
ALUMINIUM ALLOYS 2024 T3 UNCLAD,
APPLIED WITH BRUSHES ON STGP298
(KARMANS ATR42&72)
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0178
DRILLING, BORING, COUNTERSUNK
FOR ARAMID, GLASS AND GLASSCARBON HYBRIDES COMPOSITES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(00DQ47 AND MP118)
YES
3 - QUALIFIED
NONE
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0185
MILLING AND EDGING FOR ARAMID,
GLASS AND CARBON-GLASS HYBRIDS
COMPOSITES
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(000MP118 ISSUE C)
TBD
3 - QUALIFIED
RESTRICTED TO ARAMID 1454-54%-914
ON STGP298 (KARMANS ATR42&72)
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0216
SANDWICH COMPOSITE FOLDING
WITH THERMOSET RESIN FOR
INTERIOR
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF48-ST09-STQ-08-IP2-038-A0)
YES
3 - QUALIFIED
NONE
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0236
DENSIFICATION OF HONEYCOMB FOR
COMMERCIAL FURNISHING
APPLICATIONS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF49-02-STQ-04-IP2-038)
YES
3 - QUALIFIED
NONE
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
ADET0240
ANTISTATIC PAINT FOR DETAIL PARTS
IN COMPOSITE MATERIALS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(72MP113 ISSUE B)
YES
3 - QUALIFIED
RESTRICTED TO STGP298 (KARMANS
ATR42&72)
YES
9 - LIMITED SCOPE (AIPS00-00006)
RESTRICTED TO STGP298 (KARMANS
ATR42&72)ADET0240 SCOPE &
LIMITATIONS (REMARKS) IN
ACCORDANCE WITH AIPS00-00-006
TABLE 4.1
OPERATION OF PREPREG WITH
PHENOLIC RESIN BASE REINFORCED
BY LONG FIBRES
PAINTS ON COMPOSITES
MANUFACTURED WITH PHENOLIC
RESIN BASE REINFORCED BY LONG
FIBRES
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
AIPS05-02-002
APPLICATION OF ANTI-STATIC PAINTS
ON COMPOSITE PARTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(72MP113 ISSUE B)
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-ST01-STQ-04- IP2-038-A0)
YES
9 - LIMITED SCOPE (AIPS00-00006)
ADET0010 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
IGC04-63-100
QUALIFICATION OF HEAT TREATMENT
AND CURING INSTALLATIONS
NA
NOT APPLICABLE
NO
3 - QUALIFIED
FO1 / FO2 / PC1 / AU1 / AU2
PC2 (QUALIFICATIN FOLDER 00CQ175
FROM 03/07/2012)
147026
CENTRAIR SOCIETE
NOUVELLE
LEBLANC
France
IGC04-63-105
NA
NOT APPLICABLE
NO
3 - QUALIFIED
PORRINO
Spain
AITM6-7002
I+D-E-138
RADIOG