(QSPL) External Report

Disclaimer
This is the Airbus Qualified Special Process List (Register of Qualified Couples >Special Process / External Shop<)
Publication of this list neither engages Airbus in any contract relationship/responsibility nor allows automatic contract authorization, ordering, etc.
All subcontractors using qualified couples 'special process & external shop' from the Airbus QSPL remain responsible of the quality of their products.
As consequence, they shall conduct:
* Incoming inspections, as appropriate
* Performance measurements of these external shops
* Direct claim management with the external shop, as needed
* Reporting of external shop' s performance to Airbus upon request
* Alerting/informing Airbus in case of:
- significant events or
- identified risks with potential impact on Airbus
- consistently unsatisfactory quality results or
- the external shop is either unwilling or unable to implement
a corrective action plan within a reasonable time-scale
The list it regulary updated (minimum quarterly).
All rights are reserved.
For any further information, please contact [email protected].
Airbus Qualified Special Process List (External Report)
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
2015-02-02 - Page 1 of 5
Extract of Airbus Qualified Special Process List (QSPL) External Report
Updated:
= Register of Qualified Couples >Special Process / External Shop<
2015-02-02
In Accordance with AP5270 - Qualification Process of Couple 'Special Process & External Shop'
For any further information, please contact [email protected].
Report 1: Ordered By External Shop, Company Name
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
244655
ACITURRI COMPOSITES SLU
BOECILLO
Spain
AIPS03-02-018
MANUFACTURE OF STRUCTURAL
SANDWICH PARTS WITH
THERMOSETTING FIBER REINFORCED
SKINS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(2-083-244655-AE)
YES
4 - SUSPENDED (TEMPORARY NO SE REALIZA ESTE PROCESO PARA
ADDITIONAL CONTROLS)
AIRBUS ESPAÑA
250404
AERNNOVA AEROSPACE SA
SOCIEDAD UNIPERSONAL
MINANO MAYOR
Spain
AIPS02-01-001
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(03266-050A-1E)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
VÁLIDO PARA ANÓDIZADO CRÓMICO
20 V
250404
AERNNOVA AEROSPACE SA
SOCIEDAD UNIPERSONAL
MINANO MAYOR
Spain
AIPS02-05-001
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(03266-060-1E)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
SÓLO TIPO I, APLICACIÓN A BROCHA
EN REPARACIONES DE DAÑOS Y
PROTECCIÓN ZONAS DE MASA
134801
AEROEPOXY COMPOSITES
ANDALUCIA SL
BAILEN
Spain
AIPS05-01-001
APPLICATION OF BASIC PRIMER
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(10374-021-02)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
134801
AEROEPOXY COMPOSITES
ANDALUCIA SL
BAILEN
Spain
AIPS05-02-009
APPLICATION OF STRUCTURAL
PAINTS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(10374-021-02)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
221422
ALENIA AERMACCHI SPA
POLVICA DI NOLA
Italy
ADET0025
PROCESS FOR FASTENERS
INSTALLATION ON UNCURED
INTERFAY SEALANT
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(N/A)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-30
NONE
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(03284-050-01)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
251417
ALESTIS AEROSPACE MINANO
VITORIA-MINANO
Spain
AIPS02-01-002
228762
ARMOR MECA
PLESLIN TRIGAVOU
France
AIPS01-02-013
287450
CASABLANCA AERONAUTIQUE
CASABLANCA
Morocco
AIPS02-01-002
135006
CAV AEROSPACE LIMITED A
DIV OF CAV GROUP
CONSETT
United Kingdom
80-T-35-2100
CHROMIC ACID ANODIZING
80-T-35-2100
CHROMIC ACID ANODIZING
YES
147679
CHENGDU AIRCRAFT
INDUSTRY GROUP CO
SICHUAN PROVINCE
CHENGDU
China
ADET0025
PROCESS FOR FASTENERS
INSTALLATION ON UNCURED
INTERFAY SEALANT
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10-STQ-04-IP2-113-A0)
147679
CHENGDU AIRCRAFT
INDUSTRY GROUP CO
SICHUAN PROVINCE
CHENGDU
China
ADET0029
INSTALLATION OF CYLINDRICAL
SHEAR BOLTS
NO_AIRBUS_PI
CHENGDU AIRCRAFT
INDUSTRY GROUP CO
CHENGDU AIRCRAFT
INDUSTRY GROUP CO
CORSE COMPOSITES
AERONAUTIQUES
CORSE COMPOSITES
AERONAUTIQUES
CORSE COMPOSITES
AERONAUTIQUES
SICHUAN PROVINCE
CHENGDU
SICHUAN PROVINCE
CHENGDU
China
ADET0033
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
068.2491/98
China
ADET0078
STRUCTURAL RIVETING
068.2494/98
AJACCIO CEDEX 9
France
80-T-34-3016
SELF - LOCKING NUTS
80-T-34-3016
AJACCIO CEDEX 9
France
80-T-34-3030
AJACCIO CEDEX 9
France
80-T-34-9600
147679
147679
149682
149682
149682
INSTALLATION OF INSERT NUTS IN
SANDWICH COMPONENTS
APPLICATION OF SEALING
COMPOUNDS
149682
CORSE COMPOSITES
AERONAUTIQUES
AJACCIO CEDEX 9
France
AIPS03-08-003
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP0-1013
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP1-5057
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP2-3097
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP4-1123
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP4-2130
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP4-5141
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP4-5142
306039
CUTTING DYNAMICS INC
OHIO
USA
ABP6-3205
293714
DEMA SPA
SOMMA VESUVIANA
Italy
AIPS02-01-001
Airbus Qualified Special Process List (External Report)
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
CONTROL OF PROTECTIVE
TREATMENT AND FINISHING FOR
AIRBUS WING
CONVERSION COATING OF
ALUMINIUM
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
CHROMIC ACID ANODIZING OF
ALUMINIUM ALLOYS
AIPI01-02-013
AIPI02-01-002
INSTALLATION OF BLIND BOLTS PULLTYPE
SULPHURIC ACID ANODISING OF
ALUMINIUM ALLOYS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF71-10-STQ-08-IP2-113-A0)
ATTESTATION OF PROCESS
QUALIFICATION
ATTESTATION OF PROCESS
QUALIFICATION
SELF - LOCKING NUTS
INSTALLATION OF INSERT NUTS IN
SANDWICH COMPONENTS
APPLICATION OF SEALING
COMPOUNDS
80-T-34-3030
80-T-34-9600
AIPI03-08-003
ABP0-1013
ABP1-5057
ABP2-3097
ABP4-1123
ABP4-2130
ABP4-5141
ABP4-5142
ABP6-3205
IPDA62-02
REWORK OF STRUCTURES
MANUFACTURED FROM COMPOSITE
MATERIALS (LAMINATES AND
SANDWICH)
CONTROL OF PROTECTIVE
TREATMENT AND FINISHING FOR
AIRBUS WING
CONVERSION COATING OF
ALUMINIUM
PREPARATION OF COUNTERSUNK
HOLES IN METALLIC MATERIALS FOR
FASTENING AND RIVETING
APPLICATION OF CORROSION
INHIBITING PRIMER TO AN INTERNAL
OR EXTERNAL SURFACE
APPLICATION OF FLEXIBLE FINISH
PAINT TO AN INTERNAL SURFACE
APPLICATION OF SEALANT FOR
INTEGRAL FUEL TANKS
APPLICATION OF SEALANT FOR
GENERAL AIRCRAFT STRUCTURE
FABRICATION AND DEBURRING OF
HOLES IN METALLIC MATERIALS
CHROMIC ACID ANODISING OF
ALUMINIUM ALLOYS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
Status
AC7108
ANODIZING-OTHER
AC7108/1
PAINT/DRY FILM COATINGS-OTHER
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
RESTRICTED TO ALUMINIUM 2000
SERIES
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
YES
YES
TBD
YES
TBD
YES
YES
YES
TBD
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
2 - AUTHORISATION TO
PROCEED UNTIL 2014-04-30
2 - AUTHORISATION TO
PROCEED UNTIL 2014-04-30
2 - AUTHORISATION TO
PROCEED UNTIL 2014-04-30
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-28
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-28
BLIND RIVETS TYPE ABS0112
NONE
NONE
NONE
NONE
NONE
NONE
NONE
TOUCH UP PAINT ONLY
YES, MANUAL METHOD ONLY, NO
IMMERSION PROCESS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-28
NONE
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-28
TOUCH UP PAINT ONLY, •
ARE “LIMITED
TO BRUSH TOUCH-UP”
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-28
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-27
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-28
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-28
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-16
TOUCH UP PAINT ONLY, •
ARE “LIMITED
TO BRUSH TOUCH-UP”
YES
YES
YES
YES
YES
NONE
NONE
NONE
NONE
2015-02-02 - Page 2 of 5
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
Ref. No. (PI)
Title (PI)
Special
Process
Status
AIPS03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
AIPI03-02-022
MANUFACTURE OF MONOLITHIC AND
SANDWICH STRUCTURAL
COMPONENTS BY IMPREGNATION OF
DRY REINFORCEMENT MATERIALS
WITH THERMOSET RESIN
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-10-16
LIMITATION TO MODIFIED VACUUM
INFUSION PROCESS
France
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
AIPI09-02-005
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
NONE
SAINT ANDRE DES
EAUX
France
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
ESPACE
SAINT ANDRE DES
EAUX
France
ADET0175
302238
EURECA
LESPINASSE
France
ADET0262
262224
HALGAND
SAINT-BREVIN-LESPINS
France
AIPS02-05-001
EVRON CEDEX
France
AITM6-1001
EVRON CEDEX
France
AITM6-7002
IRKUTSK
Russian Fed.
80-T-30-9910
IRKUTSK
Russian Fed.
80-T-32-2611
IRKUTSK
Russian Fed.
80-T-34-3000
IRKUTSK
Russian Fed.
80-T-34-3001
IRKUTSK
Russian Fed.
80-T-34-3003
IRKUTSK
Russian Fed.
80-T-34-3050
IRKUTSK
Russian Fed.
80-T-34-3200
IRKUTSK
Russian Fed.
80-T-34-3700
IRKUTSK
Russian Fed.
80-T-34-5661
IRKUTSK
Russian Fed.
80-T-34-5803
IRKUTSK
Russian Fed.
80-T-34-5804
IRKUTSK
Russian Fed.
80-T-34-5805
IRKUTSK
Russian Fed.
80-T-34-5811
INSTALLATION OF BLIND RIVETS
80-T-34-5811
INSTALLATION OF BLIND RIVETS
YES
IRKUTSK
Russian Fed.
80-T-34-5812
INSTALLATION OF LOCKBOLTS
80-T-34-5812
INSTALLATION OF LOCKBOLTS
YES
IRKUTSK
Russian Fed.
80-T-34-5815
INSTALLATION OF HI-LOKS
80-T-34-5815
INSTALLATION OF HI-LOKS
YES
IRKUTSK
Russian Fed.
80-T-34-9020
IRKUTSK
Russian Fed.
80-T-34-9032
IRKUTSK
Russian Fed.
80-T-34-9600
IRKUTSK
Russian Fed.
80-T-35-0090
RINSING
80-T-35-0090
RINSING
TBD
IRKUTSK
Russian Fed.
80-T-35-0095
WATER QUALITY
80-T-35-0095
WATER QUALITY
TBD
IRKUTSK
Russian Fed.
80-T-35-0106
IRKUTSK
Russian Fed.
80-T-35-1101
IRKUTSK
Russian Fed.
80-T-35-2500
IRKUTSK
Russian Fed.
80-T-35-5002
IRKUTSK
Russian Fed.
80-T-35-5106
IRKUTSK
Russian Fed.
80-T-35-5218
ARP-ID
Company Name
Ref. No. (PS)
Title (PS)
154705
EADS ELBE FLUGZEUGWERKE
GMBH
DRESDEN
Germany
255991
EFITAM
BEAUCHASTEL
157071
ESPACE
157071
168461
168461
251242
251242
251242
251242
251242
251242
251242
251242
HOWMET CIRAL HOWMET
CASTING ALCOA BUSINESS
HOWMET CIRAL HOWMET
CASTING ALCOA BUSINESS
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
251242
JSC SCIENT
Airbus Qualified Special Process List (External Report)
251242
City
Country
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
REPAIR OR REWORK OF SHEET
METAL PARTS BY MANUAL TIG
WELDING
PICKLING OF TITANIUM AND ITS
ALLOYS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STAE-08-IP2-103-A1)
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STAE-08-IP2-103-A1)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
NA
NOT APPLICABLE
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
ALU ET ACIERS
CHEMICAL CONVERSION COATING
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STQ-05-IP2-296-A0)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
PENETRANT TESTING
FOR INSPECTION PROCESSES XRADIOGRAPHIC INSPECTION
GENERAL
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
NA
NOT APPLICABLE
YES
NA
NOT APPLICABLE
YES
80-T-30-9910
DRILLING, REAMING AND
COUNTERSINKING OF RIVET AND
SCREW HOLES
YES
COLD WORKING OF HOLES
80-T-32-2611
COLD WORKING OF HOLES
YES
INSTALLATION OF ANCHOR NUTS
80-T-34-3000
INSTALLATION OF ANCHOR NUTS
YES
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF HELICAL THREADED
INSERTS
TIGHTENING OF SCREWS AND NUTS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
WET INSTALLATION OF FASTENERS
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
INSTALLATION OF RIVETS WITH AN
AUTOMATIC RIVETER
INSTALLATION OF BEARINGS /
BUSHES BY BONDING
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
80-T-34-3001
80-T-34-3003
80-T-34-3050
80-T-34-3200
80-T-34-3700
80-T-34-5661
80-T-34-5803
80-T-34-5804
80-T-34-5805
80-T-34-9020
80-T-34-9032
80-T-34-9600
INSTALLATION OF FASTENERS AND
NUTS
INSTALLATION OF HELICAL THREADED
INSERTS
TIGHTENING OF SCREWS AND NUTS
PRESSING AND INSERTION OF
BUSHES AND BEARINGS
INSTALLATION OF BEARINGS AND
BUSHES BY HEATING AND/OR
COOLING
INSTALLATION OF SPHERICAL PLAIN
BEARINGS
WET INSTALLATION OF FASTENERS
BEHANDLUNG VON AL-VOLLNIETEN
VOR DEM SETZEN
INSTALLATION OF RIVETS WITH AN
AUTOMATIC RIVETER
INSTALLATION OF BEARINGS /
BUSHES BY BONDING
BONDING OF NON-STRUCTURAL
CONNECTIONS
APPLICATION OF SEALING
COMPOUNDS
PICKLING OF TITANIUM AND TITANIUM
PICKLING OF TITANIUM AND TITANIUM
80-T-35-0106
ALLOYS - ACID ALLOYS - ACID CHROMATING OF ALUMINUM AND
CHROMATING OF ALUMINUM AND
80-T-35-1101
ALUMINUM ALLOY
ALUMINUM ALLOY
ANODIZING OF TITANIUM AND
ANODIZING OF TITANIUM AND
80-T-35-2500
TITANIUM ALLOYS
TITANIUM ALLOYS
COATING WITH TWO-COMPONENT
COATING WITH TWO-COMPONENT
80-T-35-5002
PRIMER EP-BASED
PRIMER EP-BASED
COATING WITH PUR - BASED TOP
COATING WITH PUR - BASED TOP
80-T-35-5106
COAT
COAT
APPLICATION OF ELASTIC
APPLICATION OF ELASTIC
80-T-35-5218
PROTECTIVE COATINGS
PROTECTIVE COATINGS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
YES
YES
YES
YES
YES
YES
YES
TBD
YES
YES
YES
YES
YES
YES
YES
YES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-05
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-05
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
NONE
NONE
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
2015-02-02 - Page 3 of 5
External Shop
Process Specification(PS) / Process Instruction (PI)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUTSK
Russian Fed.
80-T-35-5702
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUTSK
Russian Fed.
80-T-35-5903
IRKUTSK
Russian Fed.
80-T-35-9021
IRKUTSK
Russian Fed.
80-T-35-9120
251242
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
Title (PS)
PRESERVATION FOR INTERMEDIATE
STORAGE
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
PRESERVATION OF CUT EDGES
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
Ref. No. (PI)
80-T-35-5702
80-T-35-5903
IRKUTSK
Russian Fed.
80-T-35-9124
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUTSK
Russian Fed.
80-T-36-1010
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUTSK
Russian Fed.
80-T-39-0230
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUTSK
Russian Fed.
80-T-39-0501
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUTSK
Russian Fed.
ADET0071
PAINTING OF DETAIL METALLIC PARTS
NO_AIRBUS_PI
251242
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
IRKUTSK
Russian Fed.
AIPS03-03-001
REWORK OF SCRATCHES IN
ALUMINIUM ALLOYS ON EXTERNAL
SURFACES
305951
KAJI METAL INDUSTRIES
UTSONOMIYA
Japan
80-T-39-0230
306424
KOIKE SEISAKUSHO CO LTD
NAGOYA
Japan
250547
KOREAN AIR AEROSPACE
BUSINESS DIVISION
BUSAN
South Korea
251319
KTN KUNSTSTOFFTECHNIK
NOBITZ GMBH
177641
LATECOERE CZECH REPULIC
SRO
PRAHA
306425
MATSUBARA MFG CO LTD
NAGOYA
NOBITZ
PRESERVATION OF CUT EDGES
COATING WITH PAINTS AND
VARNISHES, GENERAL
REPAIR OF PAINT COATINGS ON
METALLIC AND NON-METALLIC
SURFACES
80-T-35-9124
80-T-36-1010
HEAT TREATMENT OF ALUMINIUM
Special
Process
Status
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
LIMITED TO SA KEELBEAM ONLY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
LIMITED TO SA KEELBEAM ONLY
YES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
LIMITED TO SA KEELBEAM ONLY
LIMITED TO SA KEELBEAM ONLY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
LIMITED TO SA KEELBEAM ONLY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
LIMITED TO SA KEELBEAM ONLY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
LIMITED TO SA KEELBEAM ONLY
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
LIMITED TO SA KEELBEAM ONLY
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
WATER BASED PAINT P60+F70 AND
SOLVENT BASED SAEVENAX 135-20 +
ALEXIT 406
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF66-02-STAE-09-IP2-304-A1)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
REWORK OF SCRATCHES
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-10-01
NONE
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-10-10
NONE
AIPS02-02-005
COLD EXPANSION IN METALLIC
MATERIALS - SPLIT SLEEVE PROCESS
AIPI02-02-005
COLD EXPANSION IN METALLIC
MATERIALS SPLIT SLEEVE PROCESS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-01
LIMITED FOR ENDURANCE TEST DOOR
ONLY AND AFTER VALIDATION OF THE
PROCESS BY AIRBUS ENGINEERING.
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
NONE
Czech Republic
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
Japan
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
80-T-39-0230
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-10-10
NONE
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
ON ALU/PEEK/ALU;ALU/PEEK;PEEK
80-T-39-0230
80-T-39-0501
180666
MAZ AIR
MAZERES
France
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
180666
MAZ AIR
MAZERES
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
180666
MAZ AIR
MAZERES
France
AITM6-3004
VISUAL INSPECTION
NA
NOT APPLICABLE
YES
180704
MBDA FRANCE
BOURGES CEDEX
France
AIPS09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
AIPI09-02-005
PICKLING OF TITANIUM AND ITS
ALLOYS
YES
302737
METAL IMPROVEMENT
COMPANY TECHNOLOGY
SERVICE
SUZHOU
China
AIPS02-05-005
AIPI02-05-005
PASSIVATION OF CORROSION
RESISTANT STEEL
183193
MORGAN WARD NDT LTD
HIGH PEAK
United Kingdom
AITM6-4005
NA
183193
MORGAN WARD NDT LTD
HIGH PEAK
United Kingdom
AITM6-4022
NA
183387
MPP BOLOGNE LES FORGES
DE
PARTHENAY
France
AIPS05-02-009
189210
PCC FRANCE
OGEU LES BAINS
France
AIPS09-02-005
189013
POTEZ AERONAUTIQUE
AIRE SUR ADOUR
CEDEX
France
ADET0033
290817
PREMIUM AEROTEC GMBH
BREMEN
Germany
AIPS01-02-013
287747
PREMIUM AEROTEC GMBH
AUGSBURG
Germany
AIPS05-07-001
Airbus Qualified Special Process List (External Report)
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
PREVENTION OF CORROSION DURING
PRODUCTION
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF64-02-STAE-08-IP2-304-A2)
Germany
TREATMENT OF DAMAGE ON
COMPONENTS MADE OF ALUMINIUMALLOY
PREVENTION OF CORROSION DURING
PRODUCTION
PRESERVATION FOR INTERMEDIATE
STORAGE
ASSEMBLY WITH DUROPLASTIC ANTICORROSIVE COMPOUND, ZINK
CHROMATE BASED
80-T-35-9120
IRKUT CORP IAZ BRANCH OF
JSC SCIENT
HEAT TREATMENT OF ALUMINIUM
Title (PI)
80-T-35-9021
251242
Couple qualification Status
PASSIVATION OF CORROSION
RESISTANT STEEL
ULTRASONIC PULSE-ECHO
INSPECTION OF CARBON FIBRE
PLASTICS
ULTRASONIC
PULSE-ECHO
INSPECTION OF AREAS AROUND
FASTENER AND RIVET HOLES IN
COMPOSITES
APPLICATION OF STRUCTURAL
PAINTS
PICKLING OF TITANIUM AND ITS
ALLOYS
BONDINGS OF BUSHES, BALL
BEARINGS AND SPHERICAL BEARINGS
INSTALLATION OF BLIND BOLTS AND
BLIND RIVETS ¿PULL-TYPE¿
APPLICATION OF FIRE PROTECTION
COATINGS
AIPI05-02-009
AIPI09-02-005
NO_AIRBUS_PI
AIPI01-02-013
AIPI05-07-001
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
ON ALU/PEEK/ALU;ALU/PEEK;PEEK
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
NOT APPLICABLE
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
NOT APPLICABLE
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
APPLICATION OF STRUCTURAL
PAINTS
PICKLING OF TITANIUM AND ITS
ALLOYS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF74-01-STAE-07-IP2-101-A1)
INSTALLATION OF BLIND BOLTS PULLTYPE
APPLICATION OF FIRE PROTECTIVE
COATINGS
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
YES
YES
TBD
YES
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-26
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
TOUCH UP ONLY
NONE
METALLIC PARTS ONLY
NONE
NONE
NONE
NONE
2015-02-02 - Page 4 of 5
External Shop
Process Specification(PS) / Process Instruction (PI)
Couple qualification Status
Industrial Aspects / Industrial Process
Assessment
Limitations
(Authorized
only for)
ARP-ID
Company Name
City
Country
Ref. No. (PS)
Title (PS)
Ref. No. (PI)
Title (PI)
Special
Process
Status
189582
PROFESSIONAL WELDING
SERVICES LTD
WIMBORNE
United Kingdom
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
ABP6-5226
HARDNESS TESTING OF METALLIC
MATERIALS
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
DESK TOP REVIEW BY AIRBUS LEVEL 3
(TONY WARREN). AUTHORISATION TO
PROCEED UNTIL FULL VISIT IN 2014.
223376
ROMAERO SA
BUCHAREST
Romania
AIPS02-05-001
CHEMICAL CONVERSION COATING
80-T-35-1101
CHROMATING OF ALUMINUM AND
ALUMINUM ALLOY
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
80-T-35-1101 SCOPE & LIMITATIONS
(REMARKS) IN ACCORDANCE WITH
AIPS00-00-006 TABLE 4.1
286567
S&K AEROSPACE CO LTD
SACHEON-SI
South Korea
ABP8-1296
DEOXIDATION OF ALUMINIUM ALLOYS
ABP8-1296
DEOXIDATION OF ALUMINIUM ALLOYS
TBD
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-30
NONE
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(RC: Q06/002
AUDIT: AE05017)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
251092
SAS CAUQUIL
MONDOUZIL
France
ADET0173
259937
SIMRA MAROC
CASABLANCA
Morocco
80-T-35-5030
259937
SIMRA MAROC
CASABLANCA
Morocco
80-T-35-9120
273159
SIMRA PRODUCTION
SAINT NAZAIRE
France
AIPS01-02-005
PREPARATION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
AIPI01-02-005
PREPARARTION OF HOLES IN FIBRE
REINFORCED PLASTIC (FRP) AND
MIXED (FRP/METAL) ASSEMBLIES FOR
FASTENING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
OLW ACTIVITIES PERFORMED ON
SAINT NAZAIRE PLANT
273159
SIMRA PRODUCTION
SAINT NAZAIRE
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-30
ONLY APPLICABLE FOR OLW IN
AIRBUS SAINT NAZAIRE. LIMITATION
TO ALODINE STICK 1132
273159
SIMRA PRODUCTION
SAINT NAZAIRE
France
AIPS05-02-011
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
AIPI05-02-011
REWORK OF PAINTS ON METALLIC
AND NON-METALLIC STRUCTURAL
PARTS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-30
ONLY APPLICABLE FOR OLW IN
AIRBUS SAINT NAZAIRE FOR PAINT
REWORK OPERATIONS (SAME
LIMITATIONS AS AIPS05-02-009)
291141
SOCAERO DAHER AEROSPACE
SOCATA
CASABLANCA
Morocco
ADET0175
TOUCH UPS OF CHROMATING
TREATMENT PROTECTION ON
ALUMINIUM ALLOYS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(QUALIF62-30-STAE-09-IP2-522-A0)
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
NONE
300479
SOCIETE D ETUDE ET DE
FABRICATION DES
OUTILLAGES A
CASABLANCA
Morocco
AIPS02-01-003
TARTARIC SULPHURIC ANODISING OF
ALUMINIUM ALLOYS FOR CORROSION
PROTECTION AND PAINT
PRETREATMENT.
AIPI02-01-003
TARTARIC SULPHURIC ANODIZING OF
ALUMINIUM ALLOYS (TSA)
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-30
NONE
199410
SOMEPIC TECHNOLOGIE
BOUZINCOURT
France
AIPS03-03-012
INSTALLATION OF BEARING,
SPHERICAL BEARING AND BUSHES BY
SWAGING
AIPI03-03-012
INSTALLATION OF BEARINGS,
SPHERICAL BEARINGS AND BUSHES
BY SWAGING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
NONE
168972
STI FRANCE SA
ARUDY
France
AIPS02-02-002
DRY BLASTING
AIPI02-02-002
DRY BLASTING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
TITANIUM PARTS ONLY
266307
STI FRANCE SA
OLORON ESCOUT
France
AIPS02-04-004
HARD CHROMIUM PLATING OF STEELS
NO_AIRBUS_PI
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
()
YES
4 - SUSPENDED (TEMPORARY
ADDITIONAL CONTROLS)
COOPERANT CAZENAVE
168972
STI FRANCE SA
ARUDY
France
AIPS02-05-001
CHEMICAL CONVERSION COATING
AIPI02-05-001
CHEMICAL CONVERSION COATING
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2014-12-31
NONE
277184
SUD AERO
AUSSONNE
France
AIPS05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
AIPI05-02-003
APPLICATION OF EXTERNAL PAINT
SYSTEMS
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
ONLY ON PARTS : D545 18039 006/007;
D545 18053 000/001; D545 18043
000/001; D545 18044 000/001
277184
SUD AERO
AUSSONNE
France
AIPS09-04-001
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
AIPI09-04-001
SURFACE PREPARATION PRIOR TO
EXTERNAL PAINT APPLICATION
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-31
ONLY ON PARTS : D545 18039 006/007;
D545 18053 000/001; D545 18043
000/001; D545 18044 000/001
298080
TECNICKROME
AERONAUTIQUE INC
MONTREAL
Canada
AIPS02-02-004
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
AIPI02-02-004
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-22
STEEL PARTS ONLY
298080
TECNICKROME
AERONAUTIQUE INC
MONTREAL
Canada
AIPS04-00-000
HEAT TREATMENT OF METALLIC
MATERIALS - GENERAL
NO_AIRBUS_PI
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-22
NONE
MONTREAL
Canada
AIPS04-03-001
HEAT TREATMENT OF STEELS
AIPI04-03-001
HEAT TREATMENT OF STEELS
YES
HOT SPRINGS
USA
AIPS09-03-002
CHEMICAL MILLING OF TITANIUM
ALLOYS
AIPI09-03-002
CHEMICAL MILLING OF TITANIUM
ALLOYS
YES
298080
302174
TECNICKROME
AERONAUTIQUE INC
TRIUMPH FABRICATIONS HOT
SPRINGS INC
Airbus Qualified Special Process List (External Report)
INSTALLATION OF TIGHT FIT BUSHES
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH PAINTS AND
VARNISHES, GENERAL
80-T-35-5030
80-T-35-9120
COATING WITH TWO/THREECOMPONENT WATER-BASED PRIMER
COATING WITH PAINTS AND
VARNISHES, GENERAL
Uncontrolled copy. Confirm lastest qualification status through www.airbus.com.
SHOT PEENING FOR FATIGUE
ENHANCEMENT OF METAL PARTS
SUBCONTRACTOR (S/C) PROCESS
INSTRUCTION
(TPS900)
TBD
YES
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-05
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-05
2 - AUTHORISATION TO
PROCEED UNTIL 2015-01-22
2 - AUTHORISATION TO
PROCEED UNTIL 2014-11-30
NONE
NONE
STRESS RELIEVE ONLY
LIMITTED TO A350XWB TI-FRAMES
LOWER SHELL
2015-02-02 - Page 5 of 5