1. Ingeniería

Schedule of Accreditation
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
Issue No: 056
1049
Accredited to
ISO/IEC 17025:2005
Issue date: 30 January 2015
Unit A
Contact: Ms Kirsty Clark
Shears Way
Tel: +44 (0)1932 732100
Brooklands Close
Fax: +44 (0)1932 732111
Sunbury-on-Thames
E-Mail: [email protected]
Middlesex
Website: www.intertek.com/petroleum/sunbury
TW16 7EE
Testing performed by the Organisation at the locations specified below
Locations covered by the organisation and their relevant activities
Laboratory locations:
Location details
Activity
Location code
Address
Unit A
Shears Way
Brooklands Close
Sunbury-on-Thames
Middlesex
TW16 7EE
Local contact
Ms Kirsty Clark
Fuels, Oils and Lubricants
A
Address
Intertek House
Cleeve Road
Leatherhead
Surrey
KT22 7SB
Local contact
Ms Kirsty Clark
Environmental Samples
B
Assessment Manager: GL
Page 1 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
DETAIL OF ACCREDITATION
Materials/Products tested
MATERIALS
Type of test/Properties
measured/Range of
measurement
Standard specifications/
Equipment/Techniques used
Location
Code
Chemical and Microbiological
Tests
Analysis for the purpose of
enforcement of the Water
Supply (Water Fittings)
Regulations 1999
(SI 1999/1148)
Materials (non-metallic) for
use with potable water
Assessment Manager: GL
Chemical tests
BS 6920:Part 1:2014
B
BS 6920:Part 2:Section 2.1:2014
(Samples for testing)
B
BS 6920:Part 2:Section 2.2:
Subsection 2.2.1:2000 + A3:2014
(Odour and flavour)
B
BS 6920:Part 2:Section 2.2:
Subsection 2.2.2:2000 + A1:2014
(Odour and flavour on composite
hoses and pipes)
B
BS 6920:Part 2:Section 2.2:
Subsection 2.2.3:2000 + A2:2014
B
BS 6920:Part 2:Section 2.3:2000 +
A1:2014 (Appearance of water)
B
BS 6920:Part 2:Section 2.4:2000 +
A1:2014 (Growth of aquatic
microorganisms)
B
BS 6920:Part 2:Section 2.5:2000 +
A2:2014 (The extraction of
substances that may be of concern
to public health)
B
Page 2 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
Type of test/Properties
measured/Range of
measurement
MATERIALS
Chemical and Microbiological
Tests
Materials (non-metallic) for
use with potable water
Chemical tests
Standard specifications/
Equipment/Techniques used
Location
Code
BS 6920:Part 2:Section 2.6:2000 +
A2:2014 (Extraction of metals)
Excluding:
Clause 8, Metal Analysis
B
BS 6920:Part 3:2000 (High
temperature tests)
B
BS 6920-4:2001 (Method for the
GC-MS identification of water
leachable substances)
Excluding:
Clause 7
B
Microbiological tests
BS 6920:Part 2:Section 2.4:2000
BS 6920:Part 2:Section 2.5:2000
B
B
Materials (metallic) for use
with potable water
Chemical tests
BS 7766:1994 (withdrawn)
B
Influence of materials on
water intended for human
consumption - influence due
to migration non-metallic and
non-cementitious, factory
made & site-applied
materials
Chemical tests
BS EN 12873-1:2003
BS EN 12873-2:2005
B
Membranes
Chemical tests
BS EN 12873-4:2006
B
PETROLEUM and
PETROLEUM PRODUCTS
Chemical and Physical Tests
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22
Acidity of petroleum products
Documented In-House Method
MT-FLS-06 (Titration)
A
Air saturated vapour pressure
IP 394
A
Assessment Manager: GL
Page 3 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
1049
Accredited to
ISO/IEC 17025:2005
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
Issue No: 056
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
PETROLEUM and
PETROLEUM PRODUCTS
(cont’d)
Type of test/Properties
measured/Range of
measurement
Location
Code
Chemical and Physical Tests
(cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Aromatic Carbon Content
Documented In-House Method
MT-CMS-21 based on IP392 by
NMR
A
Aromatic hydrocarbons
IP 391
IP548
Documented In-House Method
MT-CMS-33 by LC, IP548 (mod)
A
Aromatic hydrocarbon types in
aviation fuels by HPLC with RI
IP 436
ASTM D6379
A
Asphaltenes - heptane
insolubles
IP 143
ASTM D6560
A
Boiling range of products
IP 406
ASTM D2887
IP 480
IP 507
IP 545
IP 601
A
Carbon residue of petroleum
products (micro method)
ASTM D4530
A
Cloud point of petroleum oils:
(Auto)
(Manual)
(Manual)
Assessment Manager: GL
Standard specifications/
Equipment/Techniques used
A
ASTM D5771
ASTM D2500
IP 219
Cold filter plugging point of
distillate fuels
IP 309
A
Colour (ASTM rating)
ASTM D1500
A
Page 4 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
PETROLEUM and
PETROLEUM PRODUCTS
(cont’d)
Assessment Manager: GL
Type of test/Properties
measured/Range of
measurement
Standard specifications/
Equipment/Techniques used
Location
Code
Chemical and Physical Tests
(cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Colour (Saybolt) of Aviation
Turbine Fuels
ASTM D156
A
Colour ratings of aviation
turbine fuels
IP 216 (Annex B)
A
Composition of aliphatic and
aromatic hydrocarbons
Documented In-House Method
using Mass Spectrometry
MT-CMS-12
A
Copper corrosion from
petroleum products by the
copper strip tarnish test
IP 154
ASTM D130
ISO 2160
A
Crude oil - heptane insolubles
IP 143 (modified)
A
Density and relative density of
liquids by digital density meter
IP 365
ASTM D4052
A
Distillation of crude petroleum
using Fischer 800 distillation
units
ASTM D2892
A
Distillation of petroleum
products
ASTM D86
A
Doctor test
IP 30
A
Electrical conductivity of
aviation and distillate fuels
containing a static dissipater
additive
IP 274
ASTM D2624
A
Existent gum in fuels by jet
evaporation
IP 131
ASTM D381
A
Existent gum in aviation fuels
by jet evaporation
IP 540
A
Page 5 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
PETROLEUM and
PETROLEUM PRODUCTS
(cont’d)
Assessment Manager: GL
Type of test/Properties
measured/Range of
measurement
Standard specifications/
Equipment/Techniques used
Location
Code
Chemical and Physical Tests
(cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Filtration time
MIL-T-83133
A
Flashpoint by Abel closed cup
IP 170
A
Flash point by
Pensky-Martens closed tester
IP 34
ASTM D93
A
Flash point of petroleum
products including Fatty Acid
Methyl Esters
IP 523
ISO 3679
A
Freezing point of aviation fuels
(Manual Methods)
IP 16
ASTM D2386
A
Freezing point of petroleum
products (automatic)
IP 529
ASTM D7153
A
Heat of combustion (net) of
aviation fuels
ASTM D3338
A
Hydrocarbon types and
oxygenates in petrol-multi
dimensional gas
chromatographic method
BS EN ISO 22854
A
Hydrocarbon types in liquid
petroleum products by
Fluorescent Indicator
Absorption
IP 156
ASTM D1319
A
Kinematic viscosity of
transparent and opaque
liquids and the calculation of
dynamic viscosity
IP 71Section 1
ASTM D445
IP71 Section 2
ASTM D446
A
Mercaptan sulphur in gasoline,
kerosene, aviation turbine and
distillate fuels (potentiometric
method)
IP 342
ASTM D3227
A
Page 6 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
PETROLEUM and
PETROLEUM PRODUCTS
(cont’d)
Type of test/Properties
measured/Range of
measurement
Location
Code
Chemical and Physical Tests
(cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Naphthalene hydrocarbons in
aviation turbine fuels by UV
spectrophotometry
ASTM D1840
A
Neutralisation number by
colour indicator titration
IP 139
ASTM D974
A
Oxidation stability of aviation
fuels, potential residue method
IP 138
ASTM D873
A
Oxidation stability of gasoline,
induction period method
IP 40
ASTM D525
A
Particulate contaminant of
aviation turbine fuels:
 by line sampling

by laboratory filtration
Polycyclic aromatics in base
oils by dimethylsulphoxiderefractive index method
Pour point:
(Manual)
(Auto)
Quantitative analysis for:
-
Assessment Manager: GL
Standard specifications/
Equipment/Techniques used
Chlorine
Lead
Nickel, Vanadium and
Sulphur
A
IP 216
ASTM D2276
IP 423
ASTM D5452
Documented In-House Method
MT-CMS-07
A
A
ASTM D97
ASTM D5950
Documented In-House Methods
using Wavelength Dispersive X-ray
Fluorescence
MT-ELE-06
IP 228
MT-ELE-05
A
Page 7 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
PETROLEUM and
PETROLEUM PRODUCTS
(cont’d)
Assessment Manager: GL
Type of test/Properties
measured/Range of
measurement
Standard specifications/
Equipment/Techniques used
Location
Code
Chemical and Physical Tests
(cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Qualitative and quantitative
analysis to determine
composition:
Aliphatic hydrocarbons
Oxygenated compounds
Documented In-House Method
using gas chromatography
techniques including capillary and
multicolumn systems, on-column
injection and Flame Ionisation
MT-CMS-03
A
Refractive index of
hydrocarbon liquids
Documented In-House Method
MT-COP-02
A
Saturated aromatic and polar
compounds by TLC with FI
detection
IP 469
A
Smoke point of aviation
turbine fuels
IP 57
IP 598 (manual)
ASTM D1322
A
Sulphur
ASTM D2622
ISO 14596
IP 447 by WDXRF
A
Sulphur in petroleum products
ASTM D4294
ISO 8754
IP 336 by EDXRF
A
TBN of petroleum products by
potentiometric percholoric acid
titration
IP 276
ASTM D2896
A
Thermal oxidation stability of
aviation turbine fuels
IP 323
ASTM D3241
A
Total acidity in aviation turbine
fuel
IP 354
ASTM D3242
A
Total existent sediment
IP 375 by filtration
A
Total solids content
MIL-T-83133E
A
Page 8 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
PETROLEUM and
PETROLEUM PRODUCTS
(cont’d)
Type of test/Properties
measured/Range of
measurement
Standard specifications/
Equipment/Techniques used
Location
Code
Chemical and Physical Tests
(cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Water content - distillation
method
ASTM D95
A
Water reaction of aviation
fuels
IP 289
ASTM D1094
A
Water separation
characteristics of aviation
turbine fuels by portable
separometer
ASTM D3948
A
Wax content of petroleum
products
Documented In-House Method
MT-FLS-07 by NMR
A
Hydrocarbons, chemicals
and petrochemicals
Obtaining NMR Spectra of
Samples in the Liquid/Solution
State
Flexible Scope Documented
In-House Method MT-CMS-20
including
1
13
31
19
- observing H, C, P, F,
29
11
15
Si, B and N nuclei
- 2D NMR experiments
- Spectrum editing using
DEPT, INEPT and GASPE
A
BURNER FUELS DERIVED
FROM WASTE MINERAL
OIL
Chemical Tests
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22
Mercury
IP 594 by combustion, gold trap,
cold vapour AAS
A
Metals:
- lead, nickel, chromium,
copper, zinc, arsenic,
cadmium, thallium, antimony,
cobalt, manganese and
vanadium
IP 592 by ICPMS
A
Assessment Manager: GL
Page 9 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
Type of test/Properties
measured/Range of
measurement
Standard specifications/
Equipment/Techniques used
Location
Code
Chemical Tests (cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Metals:
- lead, mercury, nickel,
chromium, copper, zinc,
arsenic, cadmium, thallium,
antimony, cobalt, manganese
and vanadium
IP 593 by WD XRF
A
Sulphated ash
IP 550
A
EARDROPS
Determination of Arachis Oil
content
Documented In-House Method
MT-CMS-30 by NMR
A
ENVIRONMENTAL
SAMPLES
Chemical Tests
- Water Leachates
Organic substances by
GC/MS
BS 6920-4
A
PETROLEUM PRODUCTS,
CHEMICALS, CATALYSTS,
LIQUIDS and SOLIDS
Chemical Tests
Organic Samples
Quantitative analysis for:
Aluminium
Barium
Boron
Calcium
Chromium
Copper
Iron
Lead
Magnesium
Manganese
Molybdenum
Nickel
Phosphorus
Potassium
Silicon
Silver
Documented In-House Methods
using Inductively Coupled Plasma
Optical Emission Spectrometry
MT-ELE-01
A
BURNER FUELS DERIVED
FROM WASTE MINERAL
OIL (cont’d)
Assessment Manager: GL
Page 10 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
Type of test/Properties
measured/Range of
measurement
Standard specifications/
Equipment/Techniques used
Location
Code
PETROLEUM PRODUCTS,
CHEMICALS, CATALYSTS,
LIQUIDS and SOLIDS
(cont’d)
Chemical Tests (cont’d)
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Organic Samples (cont’d)
Quantitative analysis for:
(cont’d)
Documented In-House Methods
using Inductively Coupled Plasma
Optical Emission Spectrometry
MT-ELE-01 (cont’d)
A
Quantitative analysis for:
Carbon
Hydrogen
Nitrogen
Documented In-House Methods
using High Temperature
Combustion, Oxidative
Combustion, Microcoulometry, UV
Fluorescence, Chemiluminescence
MT-ELE-12 (N) and MT-ELE-13
(C, H, N)
A
Chemical and Physical Tests
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22
Sodium
Strontium
Sulphur
Tin
Titanium
Vanadium
Zinc
WATER and EFFLUENT
Documented In-House Methods:
Assessment Manager: GL
Acid Soluble Silver
MT-PSS-34 using ICP
A
Ammoniacal nitrogen
MT-PSS-07 using Dr Lange Test
Kit
A
Chemical Oxygen Demand
MT-PSS-06
A
Conductivity
MT-PSS-02
A
pH
MT-PSS-01
A
Page 11 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
1049
Accredited to
Issue No: 056
ISO/IEC 17025:2005
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
WATER and EFFLUENT
(cont’d)
Type of test/Properties
measured/Range of
measurement
Chemical and Physical Tests
(cont’d)
Standard specifications/
Equipment/Techniques used
Location
Code
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22 (cont’d)
Documented In-House Methods:
(cont’d)
POTABLE WATER
Assessment Manager: GL
Phosphorus
MT-PSS-09 using ICP
A
Stabilisers
MT-PSS-40 using HPLC
A
Anions:
Fluoride
Chloride
Bromide
Nitrate
Nitrite
Sulphate
Phosphate
MT-PSS-28 using ion
chromatography
A
Total suspended and settled
solids
MT-PSS-04
A
Chemical Tests
Flexible scope enabling new
versions of existing accredited
standard test methods to be
introduced in accordance with
documented local procedure
STC-LAB-PR-22
Metals:
Aluminium
Antimony
Arsenic
Barium
Cadmium
Chromium
Iron
Lead
Manganese
Mercury
Nickel
Selenium
MT-ELE-23 by ICP-MS
A
Page 12 of 13
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
21 - 47 High Street , Felt ham, Mi ddl esex, TW 13 4UN, UK
1049
Accredited to
ISO/IEC 17025:2005
ITS Testing Services (UK) Limited
(Intertek Sunbury Technology Centre)
Issue No: 056
Issue date: 30 January 2015
Testing performed by the Organisation at the locations specified
Materials/Products tested
SEA WATER AND SEA
WATER EFFLUENT
Type of test/Properties
measured/Range of
measurement
Analysis of Metals:
Arsenic
Cadmium
Chromium
Copper
Iron
Mercury
Nickel
Lead
Thallium
Zinc
Standard specifications/
Equipment/Techniques used
Documented In-House Method
MT-ELE-20 by ICP-MS
Location
Code
A
END
Assessment Manager: GL
Page 13 of 13