1. Ingeniería

2015 PRODUCT CATALOG
COMPANY PROFILE
At CAA our mission is clear: to be a world class producer of rock-solid, operation-tested firearm accessories and to strengthen our
partnership with you, our customers, through unmatched service. Our lifetime warranty means you can execute your mission with
confidence, knowing that your gear is not only ready for action, it’s been battled tested.
We are professional shooters, ex-marines, army reservists and members of the IDF’s elite counter terrorism, reconnaissance,
commando, and reserved force units. Our diverse team keeps on developing and producing advanced battle-tested firearm accessories
to withstand the rigors of real life combat conditions, and to give our users a tactical and survival advantage.
Our past and present experience in various complex combat scenarios and our rigorous professional training, gives CAA that valuable
and second to none, know-how which is then carefully implemented and put into each and every product we design and manufacture.
So next time you upgrade to one of CAA’s products, you can rest assured it is not just another assault-rifle accessory – It is CAA!
Whether you are steeped in combat, scouring extreme environments on a covert operation, engaging criminal elements or enjoying
some recreational shooting, we are committed to serving you well beyond your expectations. We are proud of our 13 successful years
of delivering innovation, reliability and superior design.
We all thank you for your loyalty and continued faith in CAA, and look forward to serving you in the future.
Upgrade your weapon, be in command.
INDEX
RONI Pistol Carbine Conversion
4-12
New Products
13-16
Picatinny Rails & Rail Systems
17-26
Buttstocks & Cheekpieces
27-35
Magazine Management
38-44
Forearm & Pistol Grips
45-51
Shotgun Accessories
52-56
Bipods
57-58
Sights, Light/Laser Mounts
& Slings
59-67
THE PISTOL CARBINE CONVERSION
Pages 4-12
AVAILABLE MODELS
RONI®
Pistol Carbine Conversion
The RONI® (patented) provides you a better grip, stability and platform
to many accessories. Now you can use your pistol for a greater range,
faster aiming, better accuracy.
New Product
Best Seller
Increased accuracy to 80 yards and beyond
Converts a pistol to an accurate carbine in 6 seconds without pistol
disassembly or modification
Eliminates muzzle rise
No need to carry both rifle and pistol ammunition
9.4” aluminum top rail and aluminum stock shaft provide an aluminum
backbone combined with a polymer body to create a strong, durable, and
lightweight system
Two 2.25” side rails provide mounting points for lights, lasers, and more
A fourth Picatinny rail under the barrel extension
Trigger guard on many models increases safety
4 single point sling mounts
Designed for Special Forces and SWAT units, perfect for Motorcycle Officers
and SRO
Fiscally responsible
MIL-Spec
Lifetime Warranty
No gunsmithing required
Hinged polymer and aluminum carbine frame
Secured assembly with two locking pins
5 position collapsible stock, with adjustable cheekpiece
Spare magazine holder on collapsible stock
Barrel shroud can be removed from the stock and replaced with up to 1.3”
diameter suppressor
Two position detachable folding forward grip
Optional brass catcher and folding flip up sights
RONI®For Glock
PART #: ***RONIG2-9 17, 18, 19, 22, 23, 25, 31, 32
PART #: *** RONIG2-10 20, 21
PART #: **RONIG2-26 26, 27
PART #: ****RONIG2-34 34, 35
Made Of: Polymer+Aluminum
Number of Rails (in): 4
Weight (oz): 49.38
Width (in): 2.5”
Length - Stock Extended (in): 22.4”
Length - Stock Collapsed (in): 18.5”
Height (in): 5.5”
01
Black
02
Green
03
Khaki
ALL NFA RULES APPLY
RONI®For Springfield XD
PART #: RONISP1 4” Barrel 9mm
* Fits C models
** Fits Glock generation 3+4
*** Fits Glock generation 3
RONI®For Beretta PX4
RONI®For Bul Cherokee
PART #: RONIBPX4 PX 4 Storm 9mm, .40
PART #: RONIBPX445 PX 4 Storm .45
PART #: RONIBUL1 9mm Standard & Compact
RONI®For Beretta FS92
RONI®For H&K USP
PART #: RONIBI92 Italian Made - FS92, M9
PART #: RONIBA92 USA Made - FS92, M9
PART #: RONIHK1 USP 9mm, .40
Requires pistol’s integral buttom rail
RONI®For Sig Sauer
RONI®For Bersa Thunder
PART #: RONISI1226 9mm, .40
PART #: RONISI2 2022 9mm, .40
PART #: RONISI3 226 Elite 9mm, .4
PART #: RONIBS1 Bersa Thunder 9mm, .40
Requires pistol’s integral buttom rail
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
5
AVAILABLE MODELS
RONI® RECON
All the RONI® advantages without NFA requirements. Warning:
the addition of a forward grip to the RONI RECON results in the
manufacture of an “Any Other Weapon” (AOW) and is subject to
NFA rules. Warning: the addition of a stock to the RONI RECON
results in the manufacture of a Short Barrel Rilfe (SBR) and is
subject to NFA Rules.
New Product
Best Seller
Increased accuracy to 80 yards and beyond
Converts pistol in 5 seconds without pistol disassembly or
modification
9.4” aluminum top rail and stock shaft provide an aluminum
backbone combined with a polymer body to create a strong,
durable, and lightweight system
Two 2.25” side rails for mountings points for lights, lasers, and
more
Designed for Special Forces and SWAT units
Part #: RONIR
Made Of: Poly+Alum
Number of Rails (in): 2.5
Weight (oz): 42.66
Width (in): 2.5”
Length (in): 16.5”
Height (in): 5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
RONI® CIVILIAN
The RONI® Pistol carbine conversion is now available in a nonNFA model including a 16” threaded barrel and an innovative
muzzle shroud. Our new RONI® C has a sleek “Bull-Pup” look and
includes all the great features of our original RONI® without the
NFA paperwork.
New Product
Includes 16” threaded barrel
Collapsible buttstock with adjustable cheekpiece
10” upper flattop Picatinny rail – allows combinations of iron
sights, magnifier, red/green dot sights, or night vision
Two additional 5” Picatinny side rails for lights and lasers
Includes detachable folding forearm grip on bottom
Magazine holder on buttstock
Unique trigger guard for additional safety when moving tactically
Four mounting points for our Sling Swivel (PBSS), and our One
Point Slings (OPS or OPS1)
Optional flip-up Backup sights (FRS/FFS)
For Glock 17 9mm using 124 gr. +P ammo
Part #: RONICG1
Made Of: Poly+Alum
Number of Rails: 4
Weight (oz): 56.79
6
Width (in): 2.5”
Length Extended (in): 30.31”
Length Collapsed (in): 27.16”
Height (in): 5.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
RONI ACCESSORIES
RONICASE
Foam Lined Hard Case
This super rugged polymer case embossed with the RONI®
name & logo. Has room to hold the RONI® and all necessary
accessories, securely protected inside the egg crate foam lined
interior.
Hinged lid with two latches
Two through holes for security locks
Carry handle
Part #: RONICASE
Made Of: Polymer+Foam
Weight (oz): 64
Width (in): 13”
Length (in): 23”
Height (in): 4.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
RONIBAG
Soft Carrying Case
Shoulder carry case with easy access
New Product
Dual zippers with single pull tab for quick and easy access
Single strap design allows for both cross body or single shoulder
carry
Three inch wide padded strap with quick release snaps spreads
the weight reducing fatigue
Part #: RONIBAG
Made Of: Cordura
Weight (oz): 19.5
Width (in): 10”
Length (in): 20”
Height (in): 3.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
RBCF
RONI® Brass Catcher
The RONI® brass catcher fits all RONI models.
Hinged door with a magnetic latch for easy access to pistol
ejection port
Cordura bag construction includes a Velcro attached flap for ease
of emptying.
Attaches to any RONI® body with one screw
Help keep your local range clean
Part #: RBCF
Made Of: Cordura
Weight (oz): 3.2
Width (in): 5”
Length (in): 5”
Height (in): 6”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
7
ASSOCIATED PRODUCTS
TACTICAL SLINGS
SLING SWIVEL MOUNT
#OPS - One point sling
#6003 - Two point sling
#PBSS - Push button heavy duty sling swivel
LIGHT MOUNT
FLIP UP SIGHTS
Slim shape & low profile polymer Picatinny
light/laser mount
Diameter: 1” (25.4mm) / 0.75” (19mm)
#PLS1/34 - screw tightened
#PLS1Q/34Q - quick-release
Can be used as primary or back-up sights
#FRS: Low profile rear flip-up sight
#FFS: Low profile front flip-up sight
POLYMER SUITCASE
QUICK DRAW BAG
#RONICASE - can take all RONI
models and/or other accessories
#ROBAG - for fast action and
under cover missions
Page 63
Page 59
Page 7
Page 62
Page 58
Page 7
BRASS CATCHER
Page 7
#RBCF: Fits all RONI® models
Pivoting brass-cather stands on a pivot
hinge - allows activating jams and bottom
velcro for emptying the collection bag
8
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
RECOMMENDED KITS
PRO KIT - #ROPRO
ADVANCED KIT - #ROADV
STARTER
BASIC KIT
KIT
- #ROBAS
- #ROSTART
No. Item Name
Description
No. Item Name
Description
No. Item Name
Description
1
RONI®
Carbine Conversion
1
RONI®
Carbine Conversion
2
FFS
Front Flip-Up Sight
2
FFS
Front Flip-Up Sight
1
RONI®
Carbine Conversion
3
FRS
Rear Flip-Up Sight
3
FRS
Rear Flip-Up Sight
2
FFS
Front Flip-Up Sight
4
PBSS
4
PBSS
3
FRS
Rear Flip-Up Sight
4
PBSS
5
6
7
8
Sling Swivel
OPS
One Point Sling
RONICASE Suitcase
PLS1Q
Light & Laser Mount
RBCF
Brass Catcher
5
6
7
Sling Swivel
OPS
One Point Sling
RONICASE Suitcase
PLS1Q
Light & Laser Mount
5
6
Sling Swivel
OPS
One Point Sling
RONICASE Suitcase
(2)
(3)
(1)
(6)
(4)
(8)
(7)
(5)
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
9
FEATURES & ADVANTAGES
ACCURACY
RONI® Pistol Carbine Conversion allows you to realize the accuracy inherent in the pistol. Targets can be engaged at 75 meters
(85 yards) and beyond. The RONI® shoulder stock design provides the stability to significantly improve accuracy and shooting
distance. User accuracy is also increased because the sight line and rail height are above the barrel. The weight and design of
the RONI® significantly reduces recoil and eliminates muzzle jump contributing to increased accuracy.
FISCALLY RESPONSIBLE ECONOMICAL
Designed for the Special Forces operator, The RONI® has found favor with SWAT, motorcycle, school resource officers and
security details. Using the RONI®, only one weapon ammunition and magazines are required. The operator carries less weight.
In utilizing one weapon system, logistics are streamlined, saving time and money by not having to stock replacement parts,
magazines, ammunition and gunsmithing for two weapon systems. Now, one weapon serves multiple applications. Because
the RONI® uses pistol caliber and not rifle caliber ammunition, there is much less chance of penetration thru walls causing
collateral damage.
The RONI® converts your sidearm from a tertiary weapon into a primary weapon. The RONI® is priced much less than a SMG.
Training with one weapon system saves time and money and more importantly, allows the operator to develop the singular
neuro-muscular coordination needed in high stress situations.
TRANSFORMATION
• A pistol can be installed in the RONI® in 5 seconds. No pistol disassembly or gunsmithing is required
• Repeatable zero is maintained when reinserting the pistol into the RONI®. The RONI® holds the pistol at three points, around the
trigger guard, at the tang of the back strap, and at the under barrel rail mount
• Slide operation is controlled by a cocking handle friction fitted to the slide serrations
• RONI®’s large ambidextrous cocking handles makes charging the weapon easier for any size operator and allows quicker clearing
of jams
• Jams are cleared exactly the same way as when shooting the pistol by itself. All necessary parts are accessible
DESIGN FEATURES
• Polymer body with a full length reinforced aluminum spine provides the strength, rigidity durability needed while reducing
carrying weight for the operator
• Ergonomic design is comfortable and user friendly. Featuring an adjustable cheek rest, collapsible butt stock and folding grip
• Ambidextrous design of the front and rear sling mounts, charging handle and side rails allow for comfortable use by both left
and right handed operators
• Muzzle shroud includes an integral glass breaker
10
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
FEATURES & ADVANTAGES
BUTTSTOCK FEATURES:
• RONI®’s buttstock with 5 position length of pull adjustment provides a comfortable fit with or without body armor
• RONI®’s adjustable cheek rest is removable, providing a perfect sight picture when using low profile sights
• RONI®’s buttstock features a secure extra magazine mount positioned where it reduces reloading time, but doesn’t interfere
with shooting
• RONI® can be operated with the buttstock in the closed position
RAIL FEATURES
• RONI®’s 9.25” one piece upper Aluminum rail is long enough to accommodate a number of different sights, including a red dot
+ night vision or red dot + flip up sights
• RONI®’s two 2.5” side rails allow the attachment of other devices including flashlights, lasers, etc.
• RONI®’s 2 ⅛” lower polymer rail provides mounting for forward a grip
• RONI®’s top rail is CNC manufactured from aviation grade aluminum providing a solid platform
SAFETY FEATURES
• RONI® includes a trigger guard to protect the trigger for pistols without a conventional safety devise
• RONI® has a forward finger guard to protect the forefinger from the barrel shroud
VERSATILITY
• The RONI® can be used with the forward grip in a vertical or horizontal position
• The RONI® design allows the use of different model pistols from the same manufacturer in the same RONI® body
• RONI®’s design allows for accurate single handed shooting from either hand
• RONI®’s unique design enables the user to “accurately point and shoot” because the barrel is significantly lower than the sight
picture
RONI®’s totally balanced design eliminates weapon recoil, improving accuracy and reducing target reacquisition time. Increased
accuracy reduces training time
OPTIONS
• Three color options: Black, Green, Desert Tan
• Optional hinged brass catcher with magnetic release provides easy access to the ejection port
• Velcro bag closure quickly empties the spent cases
• Optional secure magnetic vehicle mount allows for quick removal from the vehicle
• RONI® accepts sound suppressors up to 3.5cm diameter
DIMENSIONS
• Weight: 49.38 oz. Overall length: 18.5 in (stock closed) 22.4 in (stock extended). Height: 5.5 in. Width: 2.5 in.
• RONI® with a Glock 17 is almost 30% lighter than the H&K MP5 SMG
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
11
One Ultimate Solution For Many Missions
Swat
Special Forces
Military
Contractors
Police
Army
VIP Protection
Border Checkpoints
Airport Security
Urban Security
Rangers
Banks
Railway Security
Embassy Protection
And Many More...
12
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
NEW PRODUCTS
Pages 13-16
NEW PRODUCTS
PEPPER SPRAY / MUZZLE BRAKE
LJPS
Lady Jean Pepper Spray Gun
Lady Jean provides a reliable, effective and reloadable self-defense
solution. Powerful 10% OC formula with UV dye. Unique tilted barrel
and conical spray pattern, so when used, it projects the pepper UV dye
over a wide area, toward the upper-part of the body — making it hard
to miss. Practice makes perfect — the Lady Jean package includes a
training canister, so you can train at home and be prepared. Sleek and
elegant, comes in a variety of colors and most important, the Lady Jean
is non-lethal.
New Product
LJPSBK
Light, durable and compact design. Fits in your hand, pocket or purse.
Easy to carry when walking or running
Smallest, lightest pepper spray gun available
Powerful 10% OC Formula. Quick, less lethal self defense. OC is the
most effective less lethal product available
UV dye in formula, provides for later threat identification
Easy access safety prevents accidental discharge
One canister provides 3-4 shots with a 8½ foot effective range
LJPSPI
Exclusive spray mist nozzle for full face coverage
Unique upward barrel angle for more accurate, intuitive aiming
against threats
User friendly. Instinctive to use, provides rapid deployment. Non-Slip
trigger operated
Includes both training and 10% OC Canister
Refillable, replacement cartridges makes Lady Jean Pepper Spray
reusable
Available in assorted colors. Pink, Blue, & Black
Part #: LJPSBK, LJPSPI, LJPSBU
Made Of: Polymer
Weight (oz): 1.94
Width (in): 1.5”
Length (in): 4.25”
Height (in): 3”
01
Black
LJPSBU
MIL-Spec
Lifetime Warranty
No gunsmithing required
MBS12
Saiga 12 Gauge Muzzle Brake
The new CAA Saiga 12 ga. muzzle brake is designed to provide every Saiga
owner with a new level of accuracy and shooting comfort. Designed to reduce
both felt recoil and concussion blast, the New Saiga 12 ga. Muzzle Brake
(MBS12) also significantly reduces muzzle rise. The six side vents are positioned
at a 90° angle from the bore to reduce both the felt recoil and concussion blast.
The three top vents virtually eliminate muzzle rise for quicker, more accurate
follow up shots. Perfect for range training and every time you pick up your
Saiga, with the new CAA muzzle brake, your 12 ga. shotgun will now feel like
you are shooting lite 20 ga loads. This muzzle brake requires no gunsmithing
or firearm modification as it screws directly on to the existing external barrel
threads of the Saiga 12 ga. shotgun. The full utilization of the existing threads
insures both centricity and a secure fit. The addition of the muzzle brake
increases the overall length of the shotgun by only 2.4”. Manufactured from
carbon steel for a lifetime of use. Before coating with a black oxide finish, each
muzzle brake is polished to eliminate any sharp edges. Proudly made in the
USA, this muzzle brake will count as one 922(r) compliant part.
Reduces felt recoil & muzzle rise
Eliminates concussion blast
No gunsmithing required. Uses existing M22 x .75 external barrel
threads of Saiga 12 ga shotgun
Increases overall barrel length by only 2.4”
Manufactured from carbon steel
Polished to eliminate any rough edges
Black oxide coated
USA manufacture. Counts as one 922(r) compliant part
14
New Product
MIL-Spec
Lifetime Warranty
No gunsmithing required
Part #: MBS12
Fits: Saiga Shotgun 12 Guage
Made Of: Carbon Steel
Weight (oz): 5.57
Length (in): 3.19”
Length on Barrel (in): 2.4”
Diameter (in): 1.18”
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
01
Black
NEW PRODUCTS
GUN SHOT COUNTERS
GSCP
Secubit Gun Shot Counter –For Glock
This is the ultimate upgrade for shooters who want to improve
split time (time between shots) measuring to 1/1000 of a second,
increase shooting accuracy, and keep a full record of shot count for
maintenance. The GSC is the smallest counting and recording device
available—small enough to fit into the grip pocket of a Glock® Gen 1-3
pistol while preserving grip ergonomics and carrying comfort.
New Product
Miniature counter device provides the capability of a true black-box
and an electronic odometer for your gun
Detects number of shots fired by sensing vibration and shock––
records up to 500,000 shots
Shows exact date and time, computes time between shots (split time)
and rate of fire to provide you with the necessary data to improve
your accuracy
Includes advanced software that automatically collects and stores
gunfire data, making it available to an Android device or a PC through
a USB cable
Includes a user-replaceable CR1632 battery with two years life
Part #: GSCP
Fits: Glock (Gen 1-3) 17, 18, 19, 22, 23
Made Of: Polymer
Weight (oz): 0.32
Width (in): 0.81”
Length (in): 0.25”
Height (in): 2.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
GSCR
Secubit Gun Shot Counter – For Rifles
This is the ultimate upgrade for shooters who want to improve
split time (time between shots) measuring to 1/1000 of a second,
increase shooting accuracy, and keep a full record of shot count for
maintenance. The GSC is smallest counting and recording device
available—small enough to fit on a universal Picatinny rail without
interfering with shooting or carrying of the firearm.
New Product
Miniature counter device provides the capability of a true black-box
and an electronic odometer for your gun
Detects number of shots fired by sensing vibration and shock—
records up to 500,000 shots
Shows exact date and time, computes time between shots (split time)
and rate of fire to provide you with the necessary data to improve
your accuracy
Includes advanced software that automatically collects and stores
gunfire data, making it available to an Android device or a PC through
a USB cable
Includes a user-replaceable CR2032 battery with two years life
Can be easily mounted onto a Picattiny rail
Waterproof up to 5 feet deep
Part #: GSCR
Fits: Picatinny Rails
Made Of: Polymer
Weight (oz): 0.84
Width (in): 1.19”
Length (in): 1.16”
Height (in): 0.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
15
NEW PRODUCTS
AK/SAIGA SIDE FOLDING STOCK & MAGAZINES
AKSFSP
AK47/Saiga Side Folding Stock
New Product
Convert your fixed stock AK or Saiga into a modern folding stock
model with the new AK47/Saiga side folding stock. This folding stock
is ambidextrous, allowing the stock to be folded to either the right or
left side of the firearm for ease of transport and carry. The six position
stock tube accepts any AR15 commercial carbine stock. Designed to
raise the cheek weld position higher for improved target acquisition.
Featuring an oversized, ribbed, heavy duty release latch for ease of
location and use, even with gloves, when folding the stock. Hinge
mechanism secures the stock in a folded position. Pulling the butt stock
away from the receiver securely locks the stock back in the extended,
fixed position. Fits most stamped AK and Saiga receivers by mounting
to the existing tang.
6 position stock tube accepts any AR15 commercial carbine stock
Oversized, ribbed, heavy duty release latch for ease
Ambidextrous skeletonized folding stock
Hinge mechanism secures the stock in folded position
Cheek weld position higher for improved target acquisition
Part #: AKSFSP/AKSFSPSKBS
Fits: AK47/Saiga
Made Of: Polymer+Steel
Weight (oz): 10.96
Width (in): 1.75”
Length (in): 9.5”
Height (in): 5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MAG762AK/MAG762SA
AK47/Saiga 30 Round Polymer Magazines
Polymer 30 round magazine with polymer magazine catch provides
flawless functionality. Features a long life corrosion resistant steel
spring and non-tilting follower for reliable feeding. Available with or
without window for easy round count and visability.
New Product
High impact polymer 30 round 7.62 x 39 magazine
Corrosion resistant steel spring
Polymer body reduces noise
Non-tilting follower
MAGW762SA
Steel magwell latch
Part #: MAG762AK / MAG76SA (no window)
Part #: MAGW762AK / MAGW76SA (window)
Fits: AK47/Saiga
Made Of: Polymer
16
Weight (oz): 7.05/6.56
Width (in): 1.25”
Length (in): 2.5”
Height (in): 9.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
MAG762SA
PICATINNY RAILS & RAIL SYSTEMS
Pages 17-26
AR15/M16
PICATINNY RAILS & RAIL SYSTEMS
XM4S/XM4SD
Picatinny Aluminum Quad Rail
Designed to exceed the newest requirements of the US Army for improving
zero retention/repeatability. With a new slimmer profile, CAA’s newest
Picatinny quad rail improves durability, reliability and maintainability while
interfacing with all issued weapon system components.
The XM4S achieves superior zero retention and repeatability, by having
the upper three rail section mount underneath the end cap and secured
in place with a friction fit ledge and roll pins. The receiver end of the XM4S
is secured to the barrel with a barrel nut bracket that is attached to the
upper three rail section with four captive flathead screws.The bottom rail
uses locking lugs with a retaining pin to keep it securely mounted to upper
handguard.
Two models are available, with one requiring delta ring removal to provide
the most secure retention and zero repeatability.
XM4S
Four full length rails
Top rail creates one long monolithic rail with the existing flat top rail
XM4S has two push button sling swivel mounting points at the front
XM4SD has four push button sling mounting points at the front and
back
Slots around the rails provide maximum ventilation around the rails
CNC machined from aviation grade aluminum to MIL-1913 standards
with a hard anodized black oxide finish for durability and ease of
maintenance
XM4SD requires Delta Ring removal
Part #: XM4S
Fits: M16/AR15/M4
Number Of Rails: 4
Made Of: Aluminum
Weight (oz): 10.6
Width (in): 2.2”
Length (in): 7.3”
Height (in): 2.4”
Part #: XM4SD
Fits: M16/AR15/M4
Number Of Rails: 4
Made Of: Aluminum
Weight (oz): 10.1
Width (in): 2.2”
Length (in): 7.3”
Height (in): 2.4”
18
XM4SD
01
Black
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AR15/M16
PICATINNY RAIL & RAILS SYSTEMS
M4S1
Handguard System With Removable Rails
CAA’s M4S1 M16/AR15 carbine handguard sets the standard for a
stable and rigid design by combining interlocking top and bottom
handguard sections with a bottom rail that can be mounted to the
existing sling swivel mount for additional rigidity. M4S1 handguard will
not move once locked in place, providing repeatable zero. This is the
first lightweight polymer handguard designed to withstand the extreme
operating temperatures of a gas piston system. This extreme heat
resistance is achieved by manufacturing the M4S1 from a proprietary
heat resistant polymer, including heat shields and providing significant
upper and lower handguard venting. The M4S1 also works with
standard direct gas operating systems. This allows the operator to
quickly change rails based on mission need. The two 1.75” side rails are
removable if not required. With the side rails attached, there is enough
room left on the contoured handguard to hold it comfortably.
Best Seller
Upper and lower handguard sections interlock, providing the rigidity
and stability you need. Solidly mounts to the delta ring and handguard
end cap
Bottom rail can mount to front sling mount for additional rigidity if
forward sling swivel is removed
Two quick detachable sling swivel mounting points
First lightweight polymer handguard designed for use with gas piston
systems
Manufactured from a special high temperature resistant polymer
Includes 4 interchangeable rails and heat shields
Two interchangeable bottom rails 4” & 1.75” of Picatinny rail allow for
operator to quickly change rails based on mission need
Two 1.75” side rails allow for mounting of lights and lasers while
providing a comfortable area to grip the handguard
Part #: M4S1
Fits: M16/AR15/M4
Number Of Rails: 3
Made Of: Polymer
Weight (oz): 6
Width (in): 2.75”
Length (in): 7”
Height (in): 2.625”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
19
AR15/M16
PICATINNY RAILS & RAIL SYSTEMS
TRM/TRM2/TRM3
Triple Rail Mounting System
Versatile polymer triple rail mounting system is available as a single 3”
Picatinny rail (TRM), two 2.5” 45˚ Picatinny rails (TRM2), or combined to
provide a triple rail mount (TRM3). Use all 3 rails on lower handguards
for grip with easy thumb access to light & laser on side rails or use 3” rail
on bottom & 2.5” rails on top.
Best Seller
TRM
Allows easy tactical light operation while using a vertical grip and
light mount
Rails can be used independently of each other
45° rails will not interfere with iron sights
Mounts on the upper and lower vent holes of most existing standard
handguards
Constructed of high density polymer
Part #: TRM/TRM2/TRM3
Fits: M16/AR15
Number Of Rails: 1-3
Made Of: Polymer
Weight (oz): 3
Width (in): 2.75”
Length (in): 3”
Height (in): 1.5”
TRM3
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
XRS6
6 Picatinny Rail Handguard System
The ultimate rail system for the M4 provides maximum accuracy
and stability during the toughest workout of your weapon. Mounts to
front sight. As the barrel heats up and moves, the XRS6 moves with it,
holding zero better than any other rail system.
Upper rail is the same height as flat top rail
Four 6.25” fixed MIL-STD 1913 rails - provide a solid platform for
mounting accessories
Two 2.25” fixed MIL-STD 1913 front sight mini rails allow mounting of
lights/lasers
Accepts FR1 forward barrel Picatinny rail to create a 7 rail system
No gunsmithing required
Part #: XRS6
Fits: M16/AR15
Number Of Rails: 6
Made Of: Polymer
Weight (oz): 11.1
Width (in): 2”
Length (in): 9.5”
Height (in): 3”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
PRFCS
Picatinny Rail For Collapsible Stock
Allows the attachment of our adjustable cheekpiece (ACP), mag holder
(MPS), shot shell holder (SSM) and other rail mounted products to
existing collapsible stocks.
Installs instantly on most standard collapsible stocks for AR15/M16
Rugged fiberglass reinforced high density polymer construction
Available with adjustable cheekpiece ACP
2 ¼” Picatinny rail
Mounts through sling opening in stock
Fast and easy installation. Available for left or right handed shooters
Part #: PRFCS
Fits: M16/AR15
Number Of Rails: 1
Made Of: Polymer
Part: PRFCS
Part: PRFCSL
Part: PRFCSACP
Part: PRFCSLACP
20
Weight (oz): 1
Width (in): 1.125”
Length (in): 3.125”
Height (in): 1.75”
01
Black
Picatinny Rail for Collapsible Stocks
Picatinny Rail for Collapsible Stocks (Left)
Picatinny Rail for Collapsible Stocks and Adjustable Cheekpiece
Picatinny Rail for Collapsible Stocks and Adjustable Cheekpiece (Left)
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
TRM2
AR15/M16
PICATINNY RAILS & RAIL SYSTEMS
BLM15
Bayonet Lug Mounted Picatinny Rail
Transforms the bayonet lug mount into a Picatinny rail section.
Allows the addition of flashlight, laser and other mounts
No gunsmithing required
Part #: BLM15
Fits: M16/AR15
Number Of Rails: 1
Made Of: Aluminum
Weight (oz): 1.3
Width (in): 0.81”
Length (in): 2.25”
Height (in): 1.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
XF3
Front Sight Triple Picatinny Rail
Enables the secure mounting of light and laser devices on the front
sight.
The 3rd rail, located above the barrel has 7 positions for height
adjustment
Part #: XF3
Fits: M16/AR15
Number Of Rails: 3
Made Of: Aluminum
Weight (oz): 4.2
Width (in): 1.5”
Length (in): 5.75”
Height (in): 1.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
FSM15X/FSM15P
Dual Picatinny Rail/Front Sight
Front sight mounted rails securely attach to AR15 style front sights.
Two rails for laser, light and other mounting applications
Available in aluminum (FSM15X) or polymer (FSM15P) models
Aluminum model accepts Forward Barrel Rail (FR1) creating a threerail front sight system (XF3)
Part #: FSM15X/FSM15P
Fits: M16/AR15
Number Of Rails: 2
Made Of: Aluminum/Polymer
Weight (oz): 2.56/1.6
Width (in): 1.375”
Length (in): 2.875”
Height (in): .875”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
21
AR15/M16/SA58
PICATINNY RAILS & RAIL SYSTEMS
PR
Picatinny Rail For AR15 Handguard
5.6” Picatinny rail can be easily installed on an existing AR15/M16
carbine/rifle handguard.
Best Seller
Single Picatinny rail screws into existing vent holes on the handguard
Fits most handguards
Excellent for mounting lasers, flashlights, vertical grips, pods and more
Part #: PR
Fits: M16/AR15
Number Of Rails: 1
Made Of: Polymer
Weight (oz): 1.6
Width (in): 0.81”
Length (in): 5.675”
Height (in): 0.375”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SR
Short Picatinny Rail For AR15 Handguard
Attach a light or laser to your factory handguard using this mini Picatinny
rail attachment.
Best Seller
Fits most handguards. Screws into existing vent holes on handguard
1.5” rail is ideal for light, laser mounts or grips
Constructed of high density polymer
Fast and easy installation
Part #: SR
Fits: M16/AR15
Number Of Rails: 1
Made Of: Polymer
Weight (oz): 0.64
Width (in): 0.81”
Length (in): 1.5”
Height (in): 0.375”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
RS58SET
4 Picatinny Handguard Rail System For The SA58
Polymer two piece handguard for the SA58. Provides a rigid lightweight
Picatinny platform.
4” upper and 5” lower full length Picatinny rails
Excellent mounting positions for optics, bipods and grips
Two removable 2” side rails are ideal for mounting light/laser devices
Constructed of polymer for strength and heat resistance
Part #: RS58SET
Fits: SA58
Number Of Rails: 4
Made Of: Polymer
22
Weight (oz): 7
Width (in): 2.5”
Length (in): 6.75”
Height (in): 2.875”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AK47/AK74
PICATINNY RAILS & RAIL SYSTEMS
RS47SET
AK47/AK74 Handguard System
Polymer two piece handguard, provides a rigid lightweight platform to
mount Picatinny accessories.
Best Seller
Two full length upper and lower Picatinny rails provide excellent
mounting positions for optics, bipods and grips
Skeletonized design reduces weight and improves cooling
Two removable 3” side rails are ideal for mounting light/laser devices
Available as a complete set (RS47SET) or separately (RS47T) and
(RS47B)
Constructed of high density polymer for strength and heat resistance
Compatible with most AK style rifles
Part #: RS47SET
Fits: AK47/AK74
Number Of Rails: 4
Made Of: Polymer
Weight (oz): 8.32
Width (in): 2”
Length (in): 6.5”
Height (in): 3.25”
01
Black
RS47T
Upper Handguard With Top Rail - 4.75”
Part #: RS47T
Fits: AK47/AK74
Number Of Rails: 1
Made Of: Polymer
Weight (oz): 1.6
Width (in): 1.375”
Length (in): 4.875”
Height (in): 1.5”
01
Black
RS47B
Lower Handguard With Bottom Rail - 4.5” & Two 3” Side Rails
Part #: RS47B
Fits: AK47/AK74
Number Of Rails: 3
Made Of: Polymer
Weight (oz): 6.72
Width (in): 2.5”
Length (in): 6.625”
Height (in): 1.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
23
AK47/AK74
PICATINNY RAILS & RAIL SYSTEMS
AK47
5 Picatinny Rail Handguard System
The world’s first five-rail system for the AK47/AK74. Five fixed rails, provide
an exceptional design that allows secure mounting of numerous mission
specific accessories, including bipods, vertical grips and heavy optics.
XRS47B: The lower section (total of 3 rails) provides the solution for
mounting grips, lights, lasers, bipods and other accessories.
XRS47BR: The combination of the lower and top rear sections provides
a total of 4 rails for mounting grips, lights, lasers, bipods, scopes, heavy
optics, red dot sights and other accessories.
XRS47BT: The combination of the lower and top front sections provides
a total of 4 rails for mounting grips, lights, lasers, bipods, scopes, heavy
optics, red dot sights and other accessories.
RONI
XRS47
Securely mounts to weapon, effectively maintaining zero, and increasing
accuracy under the most demanding conditions
Allows disassembling/assembling the AK, without rail removal, maintaining
perfect zero
Rear rail is specifically designed for heavy optics
XRS47BR
Three piece modular system, can be used individually or in conjunction with
each other
Compatible with most AK style rifles
Part #: XRS47
Fits: AK47/AK74
Number Of Rails: 5
Made Of: Aluminum
Weight (oz): 15.36
Width (in): 2”
Length (in): 15”
Height (in): 3.625”
Part #: XRS47B
Fits: AK47/AK74
Number Of Rails: 3
Made Of: Aluminum
Weight (oz): 6.4
Width (in): 1.25”
Length (in): 7”
Height (in): 2.125”
Part #: XRS47BR
Fits: AK47/AK74
Number Of Rails: 4
Made Of: Aluminum
Weight (oz): 10.88
Width (in): 2”
Length (in): 13.25”
Height (in): 3.675”
Part #: XRS47BT
Fits: AK47/AK74
Number Of Rails: 4
Made Of: Aluminum
Weight (oz): 9.92
Width (in): 1.75”
Length (in): 9”
Height (in): 3.675”
01
Black
01
01
Black
01
Black
Rail Lengths (in)
Bottom: 4.5” | Right Side: 4.125” | Left Side: 2.5” | Top Front: 5.875” | Top Rear: 5.75”
24
XRS47B
Black
XRS47BT
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
REMINGTON 870, MOSSBERG 500
PICATINNY RAILS & RAIL SYSTEMS
MR500
Mossberg 500 3 Picatinny Rail Handguard System
Lightweight forend with rails. Provides three rails for mounting light,
lasers and forward grips. Doesn’t fit Mossberg 500 A
Best Seller
Polymer one-piece handguard for Mossberg 500/590 12ga
Provides a rigid lightweight Picatinny platform
6.5” lower rail - ideal for mounting grips and other mounts
Comfortable grip design
Two removable 2.5” mini side rails - ideal for mounting light/laser
devices
Special tool or wrench may be required for installation
Part #: MR500
Fits: Mossberg 500
Number Of Rails: 3
Made Of: Polymer
Weight (oz): 6.08
Width (in): 2.5”
Length (in): 8”
Height (in): 2”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
RR870
Remington 870 3 Picatinny Rail Handguard System
Lightweight, skeletonized forend with rails. Provides three rails for
mounting light, lasers and forward grips.
Best Seller
Polymer one-piece handguard for Remington 870
Provides a rigid lightweight Picatinny platform
Comfortable grip design
5.375” lower rail - ideal for mounting grips and other mounts
Two removable 2.25” mini side rails - ideal for mounting light/laser
devices
Special tool or wrench may be required for installation
Part #: RR870
Fits: Remington 870
Number Of Rails: 3
Made Of: Polymer
Weight (oz): 7.36
Width (in): 2.5”
Length (in): 8”
Height (in): 2.5
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
25
PISTOL
UNDER BARREL RAILS
SIG226/8/9
Bottom Picatinny Rail
Quickly add a Picatinny rail below the barrel of a handgun. Easily clamps onto the
trigger guard area providing a stable platform for mounting a light/laser. CNC
machined from aviation grade aluminum.
Easily clamps onto the trigger guard area.
Providing a stable platform for mounting a light/laser.
Part #: SIGA1
Fits: SIG226/8/9
Number Of Rails: 1
Made Of: Aluminum
Weight (oz): 1.4
Width (in): 1.02”
Length (in): 3.27”
Height (in): 1.65”
01
Black
GLOCK 17/19
BERETTA 92F
Under Barrel Picatinny Rail
Part #: GLA1
Fits: Glock 17/19
Number Of Rails: 1
Made Of: Aluminum
Weight (oz): 1.48
Width (in): 0.82”
Under Barrel Picatinny Rail
Length (in): 3.67”
Height (in): 1.25”
01
Black
COLT 1911
26
Made Of: Aluminum
Weight (oz): 1.34
Width (in): 0.90”
Part #: BERA1
Fits: Beretta F92
Number Of Rails: 1
Made Of: Aluminum
Weight (oz): 1.4
Width (in): 0.90”
Length (in): 3.67”
Height (in): 1.73”
01
Length (in): 3.67”
Height (in): 1.73”
01
Black
FN Browning Hi-Power
Under Barrel Picatinny Rail
Part #: COLTA1
Fits: Colt 1911
Number Of Rails: 1
MIL-Spec
Lifetime Warranty
No gunsmithing required
Under Barrel Picatinny Rail
Length (in): 3.67”
Height (in): 1.53”
01
Black
Part #: FNA1
Fits: FN Hi-Power
Number Of Rails: 1
Made Of: Aluminum
Weight (oz ): 1.4
Width (in): 0.90”
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
Black
BUTTSTOCKS & CHEEKPIECES
Pages 27-35
AR15/M16
BUTTSTOCKS / CHEEKPIECES
SKBS
Skeletonized Buttstock
Lightweight and designed for fast shouldering, fitting both commercial
and MIL-SPEC tubes. Complete with a locking system, removable
rubber buttpad, 3 sling mounts, and contoured rubber texturized cheek
weld to maximize user comfort.
New Product
Skeletonized for light weight, only 10.88 oz., two oz. lighter than our
CBS stock
Users realize the advantages of reduced firearm weight
One model fits both MIL-SPEC and commercial tubes
Compression ring insures super tight fit on all tubes, eliminating
wiggle and play
Easy to use stock latch. Simplifies length changes and can be used
with gloves or in low light conditions
Manufactured from a high strength nylon reinforced polymer
Over-molded rubber cheek weld is contoured and texturized provide
extra user comfort
Grooved release latch provides quick length changes and prevents
accidental operation
Thumb activated extension pin locking tab slides to secure
skeletonized buttstock in place, eliminates accidental stock
movement
Removable buttpad offers an anti-slip surface and increased impact
protection
3 sling mounts for web slings
Ambidextrous and ergonomic design
Lifetime Warranty
28
MIL-Spec
Lifetime Warranty
No gunsmithing required
Part #: SKBS
Fits: M16/AR15/M4
Made Of: Polymer
Weight (oz): 10.88
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
Width (in): 1.75”
Length (in): 7.5”
Height (in): 5.25”
01
Black
02
Green
03
Khaki
AR15/M16
BUTTSTOCKS
CBS
Collapsible Buttstock
Upgrade your standard collapsible buttstock with our innovative feature
packed, six-position collapsible stock. Increase your comfort, control,
storage, and mounting options.
Best Seller
Ambidextrous side compartment with snap tight latch provides
waterproof storage for 4 CR123 batteries
Side Picatinny rail allows addition of Adjustable Cheekpiece (ACP) or
Mag Holder (MPS)
Non-slip rubber buttpad with tapered angle, allows faster shouldering
and increased comfort with body armor & more secure positive
shoulder purchase
2 ultrasonically welded metal quick release sling mounting points in
addition to standard sling mounts provide quick sling attachment and
release
Available with tube assembly including: Receiver extension, recoil
buffer, spring, locking ring, and receiver plate
Ergonomic adjustment lever included for quick, comfortable length
adjustment
Part #: CBS
Fits: M16/AR15/M4
Made Of: Polymer
Part: CBS
Part: CBSM
Part: CBST
Part: CBSACP
Weight (oz): 12
Width (in): 1.75”
Length (in): 7.5”
Height (in): 5.25”
01
Black
Collapsible Stock
Collapsible Stock for MIL-SPEC Tubes
Collapsible Stock with Tube Assembly
Collapsible Stock and Adjustable Cheekpiece
02
Green
03
Tan
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
29
AR15/M16
BUTTSTOCKS / CHEEKPIECES
SRS
Advanced Sniper Stock
The result of years of research and development. Designed in conjunction
with special units of the IDF (Israel Defense Force) this sniper stock
is ideally suited to meet the demands of the precision marksman
community. Proven to provide rapid target acquisition, faster and more
accurate follow up shots, and quicker target-to-target acquisition.
Completely adjustable, featuring a folding rear leg that converts an A2,
A4 or SR25 rifle with a bipod into a stable shooting platform. Designed
for full length stock tube.
10 position push button adjustable length of pull of stock
Quick release extendable leg has a coarse and fine push button
height adjustment plus a knurled micro height adjustment ring
Cheek rest is fully adjustable for height, with knurled knob controlling
a spring loaded mechanism to raise the cheekpiece height
Cheekpiece length can be set at any of 13 click locking positions
controlling eye relief adjustment
Vertically adjustable rubber butt pad
Leg locks in 3 positions: 0˚, 45˚, and 90˚
2 quick release sling mount points
Part #: SRS
Fits: M16/AR15/M4
Made Of: Alum + Poly
Weight (oz): 2.05
Part #: SRS
Part #: SRSNL
Horizontal Adj (in): 2.25”
Length of Pull (in): 11-14.5”
Leg Lenth (in): 3.5-7.25”
Vertical Cheek Adj (in): 1.5”
Vertical Buttpad Adj (in): 2.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
Sniper Stock
Sniper Stock (No Leg)
ARS
Advanced Sharp Shooting Stock
Specifically engineered for the Designated Marksman. The ARS allows the
user to provide rapid accurate fire. Shorter length specifically designed for
M4 carbine and similar collapsible tubes.
10 position push button adjustable length of pull of stock
Leg locks in 3 positions: 0˚, 45˚, and 90˚
Cheekpiece length can be set at any of 13 click locking positions
controlling eye relief adjustment
Cheek rest is fully adjustable for height, with knurled knob controlling
a spring loaded mechanism to raise the cheek piece height
2 quick release sling mount points
Vertically adjustable rubber butt pad
Quick release leg extension with a coarse and fine push button height
adjustment and a knurled micro height adjustment ring
Part #: ARS
Fits: M16/AR15/M4
Made Of: Alum + Poly
Weight (oz): 1.95
Horizontal Adj (in): 2.25”
Length of Pull (in): 9-11.5”
Leg Lenth (in): 3.5-7.25”
Part #: ARS
Part #: ARSNL
Sharp Shooting Stock
Sharp Shooting Stock (No Leg)
30
Vertical Cheek Adj (in): 1.5”
Vertical Buttpad Adj (in): 2.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AR15/M16
CHEEKPIECES
CP, CP1, CP2
Cheekpieces
The CP1 cheek rest raises eye level for proper alignment with optics,
while the CP2 cheek rest raises eye level for proper alignment with iron
sights. CP set includes both the CP1 and CP2.
Best Seller
Provides a comfortable cheek weld for use with optics or iron sights
Installs instantly on most collapsible stocks
No tools required, snaps into place
Made of rugged fiberglass reinforced polymer to withstand harsh
tactical conditions
Can be positioned along length of stock to provide optimal eye relief
Fits most AR15/M16 collapsible style stocks with slots
Part #: CP1
Fits: M16/AR15 stocks
Made Of: Polymer
Weight (oz): 1.88
Width (in): 1.875”
Length (in): 3.8”
Height (in): 2.12”
Rise (in): .7
Part #: CP2
Fits: M16/AR15 stocks
Made Of: Polymer
Weight (oz): 1.88
Width (in): 1.875”
Length (in): 5”
Height (in): 2.5”
Rise (in): 1.25
Part #: CP
Fits: M16/AR15 stocks
Made Of: Polymer
SET OF BOTH
CP1 & CP2
CP1
01
Black
01
Black
CP2
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
31
AR15/M16
CHEEKPIECES
SST1/SST3
Collapsible Stock
Best Seller
Stock Saddle provides a proper cheek weld for AR15 and similar
collapsible stocks at an affordable price. Easily installs onto M4 style
stocks.
A proper cheek weld allows for quicker target acquisition and comfort
Securely attaches to most collapsible stocks with supplied hardware
Made from fiberglass reinforced polymer for strength and
functionality
Waterproof, sealed battery compartments hold four AA, six CR123
batteries, or .223 cleaning kit
SST3 provides cut out for top sling mount
Part #: SST1/SST3
Fits: M16/AR15 stocks
Made Of: Polymer
Weight (oz): 2.3
Width (in): 2.625”
Length (in): 5.5”
Height (in): 2.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
ACP
Adjustable Cheekpiece
Fully adjustable cheekpiece designed to mount on the CBS collapsible
stock’s Picatinny rail or PRFCS rail for existing collapsible stocks. Pat
Pending.
Best Seller
Adjustable for height with thumb knob
Allows proper eye relief of scoped rifles by moving horizontally along
collapsible stock
Ambidextrous design
Manufactured from durable polymer with smooth finish
Compatible with most existing AR15 carbine style buttstocks with the
use of PRFCS
Part #: ACP
Fits: M16/AR15 stocks
Made Of: Polymer
Weight (oz): 3.6
32
Width (in): 2.75”
Length (in): 4.5”
Height (in): 2.5-3.5”
Rise (in): 1”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AK47/AK74
BUTTSTOCKS / CHEEKPIECES
MARS/SARS
AK47 Sharp Shooting Stock
The result of years of research and development. Designed in
conjunction with special units of the IDF (Israel Defense Force) this
sniper stock is ideally suited to meet the demands of the precision
marksman community. Proven to provide rapid target acquisition,
faster and more accurate follow up shots, and quicker target-totarget acquisition. The MARS/SARS stock allows the user to provide
enhanced rapid accurate fire. Shorter length specifically designed for
collapsible tubes. Available for milled (MARS) and stamped receivers
(SARS).
10 Position push button adjustable length of pull of stock
Vertically adjustable rubber butt pad
Quick release extendable leg has a course and fine push button
height adjustment plus a knurled micro height adjustment ring
Cheek rest is fully adjustable for height, with knurled knob controlled,
spring loaded mechanism to raise the cheek piece height
Cheek piece length can be set at any of 13 click locking position
controlling eye relief adjustment
Leg locks in 3 positions: 0˚, 45˚, and 90˚
Available with or without leg
Includes AKTS or AKTM aluminum AK stock tubes 2 quick release sling mount points
Part #: MARS/SARS
Fits: AK47 Stamped or
Milled receiver
Made Of: Polymer
Part #: MARS
Part #: MARSNL
Part #: SARS
Part #: SARSNL
Weight (oz): 20
Horizontal Adj (in): 2.25”
Length of Pull (in): 9-11.5”
Vertical Cheek Adj (in): 1.5”
Vertical Buttpad Adj (in): 2.25”
Leg Length (in): 3.5-7.25”
AK47 Milled Receiver Sharp Shooting Stock
AK47 Milled Receiver Sharp Shooting Stock (No Leg)
AK47 Stamped Receiver Sharp Shooting Stock
AK47 Stamped Receiver Sharp Shooting Stock (No Leg)
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
33
AK47/AK74
COLLAPSIBLE STOCK KITS
AK47
Collapsible Buttstock Kits
Upgrade your AK47 buttstock with an innovative, six-position collapsible
stock.
AKUFSACBS
Available for milled, stamped and under-folding receivers
Aluminum tubes provide sealed storage area for a cleaning kit or small items
Stock angle is higher, flatter for higher cheek weld, providing increased
accuracy
Side snap-tight latch compartment provides storage for 4 CR123 batteries
Provides longer length of pull than standard AK stock
Side Picatinny rail allows addition of Adjustable Cheek Piece (ACP)
Rubber non-slip buttpad with tapered angle, allows faster shouldering and
increased comfort with body armor
2 ultrasonically welded metal quick release sling mount points
Part #: AKTSCBS
Part #: AKTSPCBS
Part #: AKTMCBS
Part #: AKTMPCBS
Part #: AKFUSACBS
AK47 Collapsible Stock with Aluminum Tube for Stamped Receiver
AK47 Collapsible Stock with Polymer Tube for Stamped Receiver
AK47 Collapsible Stock with Aluminum Tube for Milled Receiver
AK47 Collapsible Stock with Polymer Tube for Milled Receiver
AK47 Collapsible Stock with Aluminum Tube for Underfolding Stock
AKTMCBS
01
Black
AKTSCBS
MIL-Spec
Lifetime Warranty
No gunsmithing required
34
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AK47/AK74
COLLAPSIBLE TUBES
AK47
Collapsible Tubes
New Product
Six position collapsible tube with storage for AK47. Sling mounting points on
all models except AKUFSA.
AKUFSA
Allows installation of M4 carbine style collapsible stocks
Aluminum models feature internal sealed storage for cleaning kit or small
items
All models have ambidexterous sling mounts except, underfolding model
AKTM
Available in aluminum or polymer models
Provides longer length of pull than standard AK stock
Part #: AKUFSA
Part #: AKTM
Part #: AKTS
Part #: AKSFSA
Part #: AKTSP
Part #: AKTMP
Part #: AKSFSP
6 Position Aluminum Tube for AK47 Underfolding Stock
6 Position Aluminum Tube for AK47 Milled Receiver
6 Position Aluminum Tube for AK47 Stamped Receiver
6 Position Aluminum Tube for AK47 Side Folding Stock
6 Position Polymer Tube for AK47 Stamped Receiver
6 Position Polymer Tube for AK47 Milled Receiver
6 Position Polymer Tube for AK47 Side Folding Stock
AKTS
01
Black
AKSFSA
AKTSP
AKTMP
AKSFSP
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
35
MAGAZINES
Pages 38-44
AR15/M16/AK47/SAIGA
MAGAZINES
MAG
.223 Polymer 30 Round Magazine
MAG polymer magazine provides flawless functionality. Contoured
interior prevents jams and misfeeds by keeping individual rounds in the
proper position. Along with a non-tilting stainless steel spring provide
100% reliability.
Best Seller
High impact polymer 30 round .223 magazine
Non-tilting follower
Corrosion resistant stainless steel spring
100% reliability
Lightweight and rustproof
Reduced noise
Part #: MAG
Fits: M16/AR15
Made Of: Polymer
Weight (oz): 5.76
Width (in): 1.25”
Length (in): 2.875”
Height (in): 7.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MAG762AK/MAG762SA
AK47/Saiga 30 Round Polymer Magazines
Polymer 30 round magazine with polymer magazine catch provides
flawless functionality. Features a long life corrosion resistant steel
spring and non-tilting follower for reliable feeding.
New Product
High impact polymer 30 round 7.62 x 39 magazine
Corrosion resistant steel spring
Polymer body reduces noise
Non-tilting follower
MAG762SA
Steel magwell latch
Part #: MAG762AK/MAG76SA (no window)
Fits: AK47/Saiga
Made Of: Polymer
Weight (oz): 7.05/6.56
Width (in): 1.25”
Length (in): 2.5”
Height (in): 9.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
39
AR15/M16/AK47/SAIGA
MAGAZINES
MAG17
.223 Polymer 30 Round Magazine With Window
CAA’s Clear Action Magazine. This unique magazine provides both a
clear window on the side showing the number of rounds remaining in
the magazine and a full magazine indicator button on the bottom. The
clear window on the magazine side allows the user to easily view the
number of rounds remaining, corresponding to the numbers stamped
into the body. In addition a white full magazine indicator on the bottom
pops out of the magazine base, providing a tactile indicator of a fully
loaded magazine during low light or night operations. The full mag
indicator can be preset to pop out at either 29 or 30 rounds by adding or
removing the follower extension.
Best Seller
A clear window on the side of the magazine provides the operator
with a visual indicator of the number of remaining rounds
A white full mag indicator on the bottom of the magazine pops out
providing a tactile indicator during low light or night conditions
Polymer body reduces noise
High impact polymer 30 round .223 magazine
Non-tilting follower
Interior of magazine is perfectly formed to the shape of the round
preventing jams and misfeeds
Counting system does not interfere with disassembly or reduce
capacity
Part #: MAG17
Fits: M16/AR15
Made Of: Polymer
Weight (oz): 5.76
Width (in): 1.25”
Length (in): 2.875”
Height (in): 7.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MAGW762AK/MAGW762SA
AK47/Saiga 30 Round Polymer Magazines With Window
Polymer 30 round magazine with polymer magazine catch provides
flawless functionality. Features a long life corrosion resistant steel
spring and non-tilting follower for reliable feeding. Available with a
window for easy round count and visability.
New Product
High impact polymer 30 round 7.62 x 39 magazine
Corrosion resistant steel spring
Polymer body reduces noise
Non-tilting follower
MAGW762SA
Steel magwell latch
Part #: MAGW762AK / MAGW76SA (window)
Fits: AK47/Saiga
Made Of: Polymer
40
Weight (oz): 7.05/6.56
Width (in): 1.25”
Length (in): 2.5”
Height (in): 9.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AR15/M16
MAGAZINES
CDMAG
.223 Polymer 30 Round Countdown Magazine
This unique magazine provides a visual indicator showing the exact
number of remaining rounds in the magazine. The visual indicator has
a colored background for easier and quicker round determinations,
30 - 21 rounds show a green background, 20 -11 rounds show a
yellow background and 10 - 0 rounds show a red background. The
visual indicator can be viewed without losing the sight picture. A second
window on the bottom of the magazine allows the operator to instantly
select a loaded magazine from the pouch.
Best Seller
To make a 100% reliable polymer magazine, we start with a magazine
body made from a high impact polymer strong enough to be run
over by a truck and still function. The interior of the magazine body is
formed with contours in the shape of the round to prevent jams and
misfeeds. A non-tilting follower and stainless steel spring produces
a magazine you can count on for 100% reliability. With the round
counting windows showing you the remaining rounds at a glance, you
now have a superior design, executed flawlessly, resulting in your
tactical advantage.
High impact polymer 30 round .223 magazine
Interior of magazine is perfectly formed to the shape of the round
preventing jams and misfeeds
Non-tilting follower
Corrosion resistant steel spring
Color coded visual indicator on back of magazine shows the number
of remaining rounds
Counting system does not interfere with disassembly or reduce
capacity
Polymer body reduces noise
MIL-Spec
Lifetime Warranty
No gunsmithing required
Part #: CDMAG
Fits: M16/AR15
Made Of: Polymer
Weight (oz): 5.76
Width (in): 1.25”
Length (in): 2.875”
Height (in): 7.5”
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
01
Black
41
AR15/M16
MAGAZINE MANAGEMENT
MAG10
.223 Polymer 30 Round Countdown Magazine
Designed specifically for users who require a low profile magazine
without the extra length and weight of a 30 round magazine. Features a
long life corrosion resistant steel spring, non-tilting follower for reliable
feeding, and an oversized base for quick extraction and handing of the
magazine while providing extra drop protection.
Best Seller
High impact polymer 10 round .223 magazine
Interior of magazine is perfectly formed to the shape of the round
preventing jams and misfeeds
Non-tilting follower
Corrosion resistant steel spring
Polymer body reduces noise
Part #: MAG10
Fits: M16/AR15
Made Of: Polymer
Weight (oz): 2.56
Width (in): 1.25”
Length (in): 2.875”
Height (in): 3.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MCD16, MC16N, MC16
.223 Polymer Magazine Couplers
CAA’s new and improved magazine coupler now comes with both small
and large removable pouch pulls. The pouch pull automatically sets the
height of the magazines, so they don’t interfere with the ejection port.
The MC16N’s robust design with thicker walls provides more resistance
to breakage. Based on the proven clamping design, the MC16N for
aluminum magazines now has three adjustment screws for additional
strength. The MC16N joins the CAA family of magazine couplers, along
with the MCD16 for polymer AR15/M16 30 round magazines and the
original MC16 for aluminum 30 round magazine.
Best Seller
The MCD16 couples two 30-round polymer CAA magazines and has
been redesigned, making it more robust, durable and user friendly.
Featuring a spring-loaded design allowing easier insertion of the
magazines, captive nuts eliminating loss during use in the field, and a
contoured surface providing a sure grasp.
AR15/M16 magazine coupler can be used with optional mag height
regulator pouch pulls
MC16
MC16N
Large and small removable pouch pulls, automatically stagger the
magazines to the correct height, so they don’t interfere with the
ejection port
Now with 3 screw tightening for extra rigidity
Robust design with thicker walls provides higher resistance to
breakage
Part #: MC16
Fits: M16/AR15
Made Of: Polymer
Weight (oz): 2.6
Width (in): 2.875”
Length (in): 3”
Height (in): 2”
Part #: MC16N
Fits: M16/AR15
Made Of: Polymer
Weight (oz): 2.3
Width (in): 2.875”
Length (in): 3”
Height (in): 2.5”
Part #: MCD16
Fits: M16/AR15
Made Of: Polymer
Weight (oz): 2
Width (in): 2.875”
Length (in): 2.5”
Height (in): 2”
42
01
Black
01
Black
01
Black
MCD16
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AK47/MP5/UZI/AR15/M16
MAGAZINE MANAGEMENT
MC47/MC5/MCUZI
AK47 & MP5 Magazine Couplers
CAA is following the success of their redesigned AR15/M16 magazine
coupler for polymer magazines, the MCD16, with the redesign of their
full line of mag couplers. All models have been redesigned making
them more robust, durable and user friendly. Featuring a springloaded design allowing easier insertion of the magazines, captive nuts
to eliminate loss during use in the field and a checkered surface for a
sure grasp. The new models include magazine couplers for steel 7.62
x 39 AK-47 magazines, H&K MP5 9mm magazines and UZI 9 mm
magazines.
Featuring a spring-loaded design allowing easier insertion of the
magazines, captive nuts to eliminate loss during use in the field and a
checkered surface for a sure grasp
Part #: MC47
Fits: AK47
Made Of: Polymer
Weight (oz): 3.5
Width (in): 3”
Length (in): 2.5”
Height (in): 2.5”
Part #: MC5
Fits: MP5
Made Of: Polymer
Weight (oz): 2.2
Width (in): 2.75”
Length (in): 1.5”
Height (in): 2”
Part #: MCUZI
Fits: UZI
Made Of: Polymer
Weight (oz): 1.9
Width (in): 1.5
Length (in): 2.38
Height (in): 2
01
Black
01
Black
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
AKMR
AK47 Magazine Release Extension
Attaches securely to existing AK mag release with 2 set screws for 1
finger magazine removal.
Best Seller
Ambidexterious design
Provides a larger surface area to release magazine
Wraps around trigger guard for easy access
One finger magazine release
Part #: AKMR
Fits: AK47/74
Made Of: Polymer
Weight (oz): 2.56
Width (in): 1.25”
Length (in): 2.88”
Height (in): 1.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
DC
Magazine Dust Cover
Rubber dust cover for AR15/M16 .223 magazine. Fits securely over top
of magazine.
Keeps sand and dirt out of the top of the magazine
Part #: DC1, DC2, DC4, DC10
Fits: M16/AR15 Magazines
Made Of: Polymer
Weight (oz): 0.32
Part #: DC1
Part #: DC2
Part #: DC4
Part #: DC10
Width (in): 1.25”
Length (in): 2.625”
Height (in): 0.75”
01
Black
Single .223 Magazine Dust Cover
Two .223 Magazine Dust Covers
Set of Four .223 Magazine Dust Covers
Set of 10 .223 Magazine Dust Covers
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
43
AR15/M16
MAGAZINE MANAGEMENT
ML556
AR15/M16 Magazine Loader
Magazine loader for .223 cal / 5.56 mm ammunition. Designed to easily load
magazines with speed and efficiency
Lightweight and compact design
Thumb lever easily loads each round
Works with M16/AR15, Ruger Mini-14 and similar .223/5.56
magazines
Part #: ML556
Fits: .223/5.56 AR15 Mags
Made Of: Polymer
Weight (oz): 1.28
Width (in): 1.375”
Length (in): 3.25”
Height (in): 3”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MPS
AR15/M16 Picatinny Magazine Holder
AR15/M16 magazine holder clamps onto any Picatinny rail allowing
the operator to position a spare magazine for quick access, reducing
loading time.
Ideal for use with our CBS collapsible stock or PRFCS Picatinny rail
for existing collapsible stocks
No straps to contend with, MPS magazine holder retains mag firmly
while allowing removal with the touch of a finger on the ergonomic
lever
Fully ambidextrous design, accepts M16/AR15 style aluminum
magazines
Can be belt mounted using RC1/RC2 belt clip
High density polymer construction
Part #: MPS
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 2.1
44
Width (in): 1.5”
Length (in): 4”
Height (in): 3”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
FOREARM & PISTOL GRIPS
Pages 45-51
AR15/M16
MAGAZINE WELL GRIPS
DESIGNED FOR CQB SITUATIONS
Grip’s close proximity to the magazine well allows the operator to utilize a shorter arc of movement. During room clearing operations, a short arc of
movement provides a quicker response to potential threats. Magazine well grips increase safety and reliability by reducing the chance of a misfeed or jam
caused by contact with the magazine. Reduces the chance of operator injury due to a round failure in the AR15. Provides a safe and comfortable method
of firearm control under all conditions. These magazine well grips provide more control during firing while reducing fatigue. NTOA Approved - Member
Tested and Recommended.
MGRIP
Curved CQB Magazine
Best Seller
Curved design provides a comfortable grip
Securely attaches to any Picatinny rail
No tools necessary for installation or removal
Captive thumbnut can’t be lost. Provides quick and easy installation
without tools to Picatinny rail
Part #: MGRIP
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 3.52
Width (in): 1.6”
Length (in): 3.25”
Height (in): 3.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MGRIP1
Ergonomic CQB Magazine
Best Seller
Finger grooves for increased control, especially under adverse
conditions
Captive thumbnut can’t be lost. Provides quick and easy installation
without tools to Picatinny rail
Finned design reduces weight and dissipates heat.
Two removable pressure switch mounting covers
Securely attaches to any Picatinny rail
Plugged cap provides waterproof battery storage
Side rails assist in guiding magazine into well
Part #: MGRIP1
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 2.56
Width (in): 1.6”
Length (in): 3.5”
Height (in): 3.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MGRIP2
Magazine Well Ergonomic CQB Magazine
Best Seller
2 piece design clamps around magazine well, Picatinny rail not
required
Features finger grooves
Removable pressure switch mounting cover
Provides protection of lower receiver
Part #: MGRIP2
Fits: AR15/M16
Made Of: Polymer
Weight (oz): 2.88
46
Width (in): 1.5”
Length (in): 4.375”
Height (in): 2.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
FOR PICATINNY RAILS
VERTICAL FORWARD GRIPS
EVG
Ergonomic Vertical Grip
Polymer and rubber forward grip with checkered finger grooves and
rubberized backstrap. Provides a natural fighting stance, a more
controlled operation & comfortable carry.
Best Seller
Mounts on Picatinny rail
Provides natural fighting stance
Rail lug prevents any forward or rearward movement
Skeletonized design reduces weight
Rubberized back for comfortable grip surface
No tools required screw cap storage compartment holds batteries or
other small items like firing pins, etc.
Checkering on finger groove provides added control
Captive thumbnut can’t be lost. Provides quick and easy installation
without tools to Picatinny rail
Part #: EVG
Fits: Picatinny Rail
Made Of: Polymer+Rubber
Weight (oz): 3.84
Width (in): 1.375”
Length (in): 2.175”
Height (in): 4.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
MVG
Short Vertical Grip
Polymer and rubber forward grip with rubberized front and back panels
and pressure switch mounts. Compact vertical forward grip puts the
user in a comfortable fighting stance. No tools required.
Best Seller
Incorporates a no tool screw cap storage compartment
Rubberized front and back panels for comfortable non-slip grip
surface
Dual removable pressure switch mounts
Captive thumbnut can’t be lost. Provides quick and easy installation
without tools to Picatinny rail
Part #: MVG
Fits: Picatinny Rail
Made Of: Polymer+Rubber
Weight (oz): 3.84
Width (in): 1.375”
Length (in): 2.175”
Height (in): 3.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
47
FOR PICATINNY RAILS
VERTICAL FORWARD GRIPS
FVG5
5 Position Folding Forearm Grip
Molded polymer five-position folding grip
Best Seller
Side push button, allows operator to switch between different grip
positions
Grip is available when needed and folds out of the way when the
forward grip is not required
A plugged storage compartment
Screw-down clamp-locking system securely locks on rail
Part #: FVG5
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 4.16
Width (in): 1.75”
Length (in): 4.5” (Folded)
Height (in): 4.75” (Fully Extended)
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SVG
Short Forearm Vertical Grip
Polymer forward grip
Best Seller
Compact, curved cylinder design
6 ring grooves for operator control
Screw-down clamp-locking system securely locks on rail
Incorporates a storage compartment
Part #: SVG
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 3.2
Width (in): 1.75”
Length (in): 1.125”
Height (in): 4.125”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
BVG
Forearm Vertical Grip
Quick detach, molded polymer vertical grip with battery storage
Best Seller
Attaches to rail utilizing a twist tightening design
Waterproof storage for 3 CR123 batteries
7 Ring grooves provide operator control and prevent hand slippage
under moist conditions
No tools required
Part #: BVG
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 3.2
48
Width (in): 1.5”
Length (in): 1.125”
Height (in): 5.125”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
FOR PICATINNY RAILS
VERTICAL FORWARD GRIPS
CGRIP
Ergonomic Forearm Grip
Comfortable forward grip with finger grooves and palm rest.
Best Seller
Finger grooves for secure operator grip
Screw cap storage compartment
Includes removable pressure switch mount.
Captive thumbnut can’t be lost. Provides quick and easy installation
without tools to Picatinny rail.
Part #: CGRIP
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 4
Width (in): 2.25”
Length (in): 2.375”
Height (in): 5.875”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
TVG/TVG1
Thunder Vertical Grip
Ergonomic polymer three finger and three + 1 finger forward grip.
Best Seller
New contoured shape provides comfort
Both grips offer a plugged storage compartment
Compact and lightweight
Screw down clamp locking system for secure mounting to any
Picatinny rail
Short grip provides grasping surface without snagging on objects
Part #: TVG
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 1.92
Length (in): 2”
Height (in): 2.75”
Part #: TVG1
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 3.2
Length (in): 2”
Height (in): 4.375”
01
TVG
Black
01
Black
TVG1
MIL-Spec
Lifetime Warranty
No gunsmithing required
FGA
Flashlight Grip Adaptor
Combines light mount and vertical grip into one unit. Puts operator in
a fighting stance while identifying and engaging targets. Eliminates
rail clutter. Accommodates 1” push button end cap lights. Made of high
density polymer.
Best Seller
Thumb activation eliminates sympathetic response of trigger finger
designs providing safer operation under stressful conditions
Side safety switch prevents inadvertent activation of the light during
covert activities
Storage compartment with a screw cap base holds small cleaning kit
or extra batteries
Rubber pressure switch covers and inserts allow for customized
pressure switch sizing
1.5” Picatinny rail is included; attaches to either side, or bottom of
mount, for the addition of a laser
Storage compartment includes a foam plug to eliminate rattling &
noise
Captive thumb-nut can’t be lost. Provides quick and easy installation
to Picatinny rail without tools
Part #: FGA
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 9
Width (in): 2”
Length (in): 5.5”
Height (in): 5.625”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
49
AR15/M16/AK47
REPLACEMENT PISTOL GRIPS
UPG16/UPG47
AR15/M16/AK47 Pistol Grip
Best Seller
Improve comfort and control with this pistol grip, with six
interchangeable inserts. It easily replaces standard grip, includes three
finger grooves and three palm swell inserts, allowing the operator to
customize their grip to fit all hand sizes.
UPG16
Provides increased control during firing and reduces fatigue
Finger grooves, palm swell and contoured backstrap provide for an
increased powerful grip
3 easily interchangeable front and rear rubberized grip inserts mount
securely in place
Capped storage for small items or an optional cleaning kit
Part #: UPG16
Fits: AR15/M16
Made Of: Polymer+Rubber
Weight (oz): 3.7
Width (in): 1.375”
Length (in): 2.25”
Height (in): 4.5”
Part #: UPG47
Fits: AK47
Made Of: Polymer+Rubber
Weight (oz): 3.7
Width (in): 1.375”
Length (in): 2.25”
Height (in): 4.25”
01
Black
UPG47
MIL-Spec
Lifetime Warranty
No gunsmithing required
01
Black
UPGS
Target Shooting Stand
Provides a solid platform for hand support during sustained target
exercises. Flat surface helps stabilize and support rifle. Stand snaps
into UPG style grips.
Best Seller
Constructed of high density polymer
UPG16 or UPG47 grip sold separately
Part #: UPGS
Fits: UPG Grips
Made Of: Polymer
Weight (oz): 2.5
50
Width (in): 1.75”
Length (in): 3.5”
Height (in): 1.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
AR15/M16/AK47
REPLACEMENT PISTOL GRIPS
G16
Ergonomic Pistol Grip
Best Seller
Tactical pistol grip for AR15/M16. Increases comfort and weapon
performance.
Provides more control and surface area during firing while reducing
fatigue and slippage when wet
Beavertail, finger grooves, palm swell and checkering provide for
powerful grip
Storage compartment with snap cap in base for small item storage
Replaces the original grip in moments
Part #: G16
Fits: AR15/M16
Made Of: Polymer+Rubber
Weight (oz): 4
Width (in): 1.375”
Length (in): 2.5”
Height (in): 4.5”
01
Black
02
Green
03
Tan
MIL-Spec
Lifetime Warranty
No gunsmithing required
G47
Ergonomic Pistol Grip
Tactical pistol grip for AK47.
Best Seller
Increases comfort and weapon performance
Provides more control and surface area during firing while reducing
fatigue and slipping out of your hand when wet
Finger grooves and palm swell provide for powerful grip
Storage compartment with snap cap in base for small item storage
Replaces the original grip in moments
Part #: G47
Fits: AK47
Made Of: Polymer
Weight (oz): 3.5
Width (in): 1.25”
Length (in): 2.5”
Height (in): 4.25”
01
Black
02
Green
03
Tan
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
51
SHOTGUN ACCESSORIES
Pages 52-56
REMINGTON & MOSSBERG
MODULAR SYSTEM FOR TACTICAL SHOTGUNS
TACTICAL SHOTGUN ADVANTAGES
Versatile modular system applicable for all situations.
Quick, secure and easy conversion from cruiser style to full stock
style with two screws
Six position adjustable stock with rubber recoil pad increases comfort
and endurance, provides adjustable length of pull to accommodate all
size users and body armor
Stock features ambidextrous waterproof compartment for 4 CR123
batteries and side Picatinny rail for mounting optional five round 12
ga. shell holder
Adjustable spring loaded recoil reduction tube reduces recoil,
increases comfort and control during extended shooting/training
sessions
CUSTOMIZE YOUR SHOTGUN
Customizable system for each mission.
1
1. Install the pistol grip
Choose pistol grips with or without the rail for cqb and home
defense applications.
2. Add the stock easily for comfortable live fire training
2
Choose a six position collapsible stock with or without adjustable
spring loaded recoil reduction.
3. Add a triple rail forend with three picatinny rails for mounting
accessories
Side rails are removable if not mission required.
3
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
53
REMINGTON & MOSSBERG
REPLACEMENT PISTOL GRIPS & STOCKS
PG870/MS500/RGP870/MGP500
Shotgun Pistol Grips
The ultimate kit to replace the shotgun factory stock, pistol grip and
more. Providing better accuracy, stability and comfort.
Replace factory buttstock with a pistol grip and Picatinny sight mount.
Available for Remington 870 and Mossberg 500/590 12 gauge
Remington grips include 6 interchangeable finger grooves and back
straps
1. Mossberg 500™ shown with pistol grip, without sight rail and
MR500 forend with 3 rails
MGP500
RGP870
2. Remington 870 shown with pistol grip, with sight rail and RR870
forend with 3 rails
WITH RAIL
Part #: RGP870/MGP500
Fits: Remington 870 12GA/
Mossberg 500/590 12GA
Number of Rails: 1
Made Of: Polymer
Weight (oz): 8/6.72
Width (in): 1.5”/1.5”
Length (in): 6.9”/6.75”
Height (in): 8.375”/7.875”
WITHOUT RAIL
Part #: PG870/MS500
Fits: Remington 870 12GA/
Mossberg 500/590 12GA
Number of Rails: 0
Made Of: Polymer
Weight (oz): 6.7/5.12
Width (in): 1.5”/1.5”
Length (in): 2.5”/4”
Height (in): 6”/5.5”
1
01
Black
2
MIL-Spec
Lifetime Warranty
No gunsmithing required
01
Black
Remington & Mossberg
Collapsible Stocks + Pistol Grips (Picatinny Sight Mount)
Our stock system replaces factory buttstock with a pistol grip, Picatinny
rail sight mount and CBS six-position collapsible stock, providing the
versatility you need for different situations. Pistol grip for CQB and
home defense; collapsible stock for range training and longer range
situations.
CMGPT500
The 6 position stock system is available with recoil reduction
Available for Remington 870 and Mossberg 500/590
Pistol Grip with Rail + 6 Position Tube & Stock: Remington 870 12GA (CRGPT870),
Mossberg 500/590 (CMGPT500)
Pistol Grip with Rail + 6 Position Recoil Reducing Tube & Stock: Remington 870 12GA
(CRGPAT870), Mossberg 500/590 (CMGPAT500)
Pistol Grip with No Rail + 6 Position Tube & Stock: Remington 870 12GA (CPGT870),
Mossberg 500/590 (CMST500)
Pistol Grip with No Rail + 6 Position Recoil Reducing Tube & Stock: Remington 870 12GA
(CPGRP870), Mossberg 500/590 (CMSAT500)
54
01
CMST500
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
SHOTGUN
STOCKS, RAILS & ACCESSORIES
RS870
Remington 870 12GA Buttstock Adaptor
Pistol grip, 6 position AR15 tube with collapsible buttstock. Improves
comfort, control, and accuracy. Includes our CBS collapsible stock.
Includes aluminum stock adaptor and aluminum AR15 6 position
tube
Accepts any commercial AR15 collapsible stock
Available for Remington 870 12 ga. and similar shotguns
6 interchangeable finger grooves and palm swells on pistol grip
provide strong grip
Part #: RS870
Fits: Remington 870 12 ga
Made Of: Polymer
Weight (oz): 7.4
Width (in): 2.63”
Length (in): 7.95”
Height (in): 6.86”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SSM
12 Gauge Shotgun Shell Holder
Shotgun shell holder mounts onto Picatinny rail reducing reload time. Provides
the operator quick access to five extra shells.
Ideal for use with CBS collapsible stock or Picatinny rail mount for
existing collapsible stocks (PRFCS / PRFCSL)
Belt mountable using RCB1/RCB2 belt clip
High density polymer construction
Push button release
Part #: SSM
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 1.5
Width (in): 1.25”
Length (in): 4.675”
Height (in): 1.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
UPR
Sling Swivel Stud Rail Attachment
Add a Picatinny rail on your rifle or shotgun, to securely mount a light, laser,
bipod or grip. Replaces sling swivel stud.
CNC machined from aviation grade aluminum
Part #: UPR
Fits: Shotgun/Rifle with sling swivel stud
Made Of: Aluminum
Weight (oz): 1.5
Width (in): 0.81”
Length (in): 2.5”
Height (in): 0.56”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
55
RIFLE & SHOTGUN
RAILS
HGA1
Barrel Mounted Shotgun Rail
Aluminum 1.75” Picatinny rail fits plain or vent rib shotgun barrels up to
12 gauge, allowing mounting of light/laser equipment.
Secure stable fit ensures accuracy of mounted item
Easy to install and remove
CNC machined from aviation grade aluminum to be lightweight and
strong
Part #: HGA1
Fits: Rifles/Shotguns
Made Of: Aluminum
Weight (oz): 1
Width (in): 0.90”
Length (in): 1.88”
Height (in): 1.53”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SGR1
Plain Barrel Shotgun
Aluminum 2” Picatinny rail fits plain barrel sizes up to 12 gauge, allowing
mounting of light/laser equipment.
Secure fit ensures accuracy of mounted item
Easy to install and remove
CNC machined from aviation grade aluminum to be lightweight and
strong
Fits rifle and AR15 type barrels
Part #: SGR1
Fits: Rifles/Shotguns
Made Of: Aluminum
Weight (oz): 1.4
HGA1
56
Width (in): 1.29”
Length (in): 2.24”
Height (in): 1.18”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SGR1
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
BIPODS
Pages 57-58
FOR PICATINNY RAILS
BIPODS
NBP/SBP
Bottom & Side Rail Mounting Bipod
Best Seller
Improve your accuracy with these versatile bipods. Mounts onto a
Picatinny rail. Ideal for snipers, sharp shooters and other missions.
SBP Side rail mounting provides an even lower center of gravity and
a wider stance resulting in even greater stability with all of the same
features of NBP bottom rail mounting bipod.
Strong lightweight design constructed of stainless steel and polymer
is super rugged
NBP
No external springs. The entire mechanism is encased to prevent dirt
and sand infiltration
Legs can be attached/detached with two swift movements to change
out leg lengths on rocky terrain
Legs can be folded fully forward and fully backwards; as well as
locking at 90°
Concave base mount cradles the weapon providing a lower center of
gravity & includes a 3” removable Picatinny rail to attach a forward
grip or other accessories
Comfortable rubber covers on legs provides a non-slip grip
NBP/SBP have finger grooves for quicker leg positioning
Each leg operates separately and independently. They can be set at
different heights for use on uneven terrain
Quick release push button for leg extension with push button guard
Serrated rubber feet for use on smooth surfaces
Leg length 8-12”/6”-8”
Part #: NBP
Fits: Picatinny Rail
Made Of: Polymer/Stainless Steel
Weight (oz): 17.6
Width (in): 4.25”
Length (in): 8”-12”
Overall Length (in): 12.5”
Height (in): 2”
Part #: SBP
Fits: Picatinny Rail
Made Of: Polymer/Stainless Steel
Weight (oz): 17.6
Width (in): 1.5”
Length (in): 8”-12”
Overall Length (in): 12.5”
Height (in): 2”
Part #: NBPS
Fits: Picatinny Rail
Made Of: Polymer/Stainless Steel
Weight (oz): 17.6
Width (in): 4.25”
Length (in): 6”-8”
Overall Length (in): 8.25”
Height (in): 2”
Part #: SBPS
Fits: Picatinny Rail
Made Of: Polymer/Stainless Steel
Weight (oz): 17.6
Width (in): 1.5”
Length (in): 6”-8”
Overall Length (in): 8.25”
Height (in): 2”
01
SBP
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
01
Black
01
Black
01
Black
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
58
SIGHTS, LIGHT/LASER MOUNTS & SLINGS
Pages 59-67
FOR PICATINNY RAILS
SIGHTS
FFS
Front Flip-Up Sight
Super low profile front sight features a quick adjust center post (no
tools required) for elevation surrounded by two guide posts to assist in
focusing the operator’s eye to the target.
Best Seller
No tool needed for elevation adjustment
Elevation click adjustable from firing position
Super low profile sights are manufactured from polymer and
aluminum to reduce weight
Spring loaded push button raises the sights
The push button can be accessed ambidextrously
The rugged flip up mechanism is designed to ensure constant battery
action and repeatable zero
Secure mounting to any Picatinny Rail. Square center lug eliminates
any movement
Part #: FFS
Fits: Picatinny
Made Of: Polymer+Steel
Weight (oz): 1
Width (in): 1.6”
Length (in): 2.12”
Height Opened (in): 1.25”
Height Closed (in): 0.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
FRS
Rear Flip-Up Sight
The rear sight features three-operator selectable apertures, including
the standard military A2 style double peep aperture with notch sight
aperture. All are click adjustable for windage.
Best Seller
Super low profile sights are manufactured from polymer and
aluminum to reduce weight
Ambidexterious spring loaded push button raise the sight
The rugged flip up mechanism is designed to ensure constant battery
action and repeatable zero
Secure mounting to any Picatinny rail. Square center lug eliminates
any movement
The large aperture is designed to be used for CQB and low light
conditions, the small aperture for longer range target acquisition
Part #: FRS
Fits: Picatinny Rail
Made Of: Polymer+Steel
Weight (oz): 1
60
Width (in): 1.6”
Length (in): 2.12”
Height Opened (in): 1.25”
Height Closed (in): 0.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
FOR PICATINNY RAILS
LIGHT AND LASER MOUNTS
PLS1Q/PLS34Q
Quick Detach Low Profile Offset Mount
Offset mount positions light closer to the weapon, decreasing possibility
of snagging on objects while bringing light switch closer to thumb.
Best Seller
Light/laser mounts on the side of the Picatinny rail which brings the
switch closer to the operator’s thumb
1” and .75” low profile, quick release push button mounts
New offset mounting position
Part #: PLS1Q (Quick Release) 1”
PLS34Q (Quick Release) .75”
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 0.96
PLS1Q
Diameter (in): 1” and .75”
Width (in): 1.375”
Length (in): 1.75”
Height (in): 2.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
PLS1/PLS34
Screw Tightened Low Profile Offset Mount
Offset mount positions light closer to the weapon, decreasing possibility
of snagging on objects while bringing light switch closer to thumb.
Best Seller
Light/laser mounts on the side of the Picatinny rail which brings the
switch closer to the operator’s thumb
1” and .75” low profile, screw tightened push button mounts
New offset mounting position
Part #: PLS1 (Screw Tighten) 1”
Part #: PLS34 (Screw Tighten) .75”
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 1.6
PLS1
Diameter (in): 1” and .75”
Width (in): 2.25”
Length (in): 1.75”
Height (in): 2.5”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
PL1/PL2
Screw Tightened Low Profile Offset Mount
Best Seller
Light/laser mounts on the side of the Picatinny rail which brings the
Combat proven design in use by military worldwide
Available in 2 diameters: PL1 - .75”, PL2 - 1”
Slides and locks securely on rail using dual spring loaded finger
release rail locks
Secure C clamp mechanism tightens around light or laser
Quick release design
Part #: PLS1 (Screw Tighten) 1”
PLS2 (Screw Tighten) .75”
Fits: Picatinny Rail
Made Of: Polymer
Weight (oz): 0.96 / 1.28
PL1
Diameter (in): 1” and .75”
Width (in): 1.3” / 1.7”
Length (in): 1.9” / 1.9”
Height (in): 1.8” / 2.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
61
FOR PICATINNY RAILS
LIGHT AND LASER MOUNTS
AL134
Dual Aluminum Picatinny Rail Light & Laser Mount
One piece design, both .75” laser and 1” flashlight attach to your
weapon.
Best Seller
Repeatable zero increases accuracy
Very slim offset design keeps accessories close to the weapon
minimizing snags
Separate locking screws for each accessory
Allows rear thumb on/off operating or remote switch
Tightens with captive nut. Uses flathead screw or wrench
Diameter (in): 1” and .75”
Width (in): 3.25”
Length (in): 2.5”
Height (in): 1.25”
Part #: AL134
Fits: Picatinny Rail
Made Of: Aluminum
Weight (oz): 3.5
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
AL1/AL34
Aluminum Picatinny Rail Light & Laser Mount
Best Seller
Strong aluminum mount for laser/flashlight.
Repeatable zero increases accuracy
Very slim offset design keeps accessories close to the weapon
AL1
Can be mounted to the weapon in many positions: left/right/top/
bottom
Allows thumb operation of rear light switch or use of remote switch
Tightens with captive nut. Uses flathead screw or wrench
Diameter (in): 1” and .75”
Width (in): 1.2”/1.9”
Length (in): 1.25”
Height (in): 2.75”/2.375”
Part #: AL1 / AL34
Fits: Picatinny Rail
Made Of: Aluminum
Weight (oz): 2.24/1.9
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
AL2
UFH
Polymer 5 Position Picatinny Rail Light & Laser Mount
5 position laser and light mount
Best Seller
SCREW TIGHTENED
Light or laser can be quickly repositioned for all situations
Operator can easily access on/off button with thumb while using a
vertical grip
Locks in position at 0˚ 45˚ 90˚ 135˚ 180˚
Available in Screw Tightened or Push Button Quick Release models
Heavy duty polymer construction
SCREW TIGHTENED
UFH1: 0.71” - 0.81” Diameter
UFH1: 0.84” - 0.94” Diameter
UFH1: 0.96” - 1.06” Diameter
UFH1: 1.11” - 1.20” Diameter
62
PUSH BUTTON QUICK RELEASE
UFH1P: 0.71” - 0.81” Diameter
UFH1P: 0.84” - 0.94” Diameter
UFH1P: 0.96” - 1.06” Diameter
UFH1P: 1.11” - 1.20” Diameter
01
Black
PUSH BUTTON QUICK RELEASE
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
FOR PICATINNY RAILS
SLING MOUNTS
UEM
Universal Equipment Mount
Mounts on Picatinny rail to provide a sling swivel stud for products such
as Harris® bipods and other accessories.
Screw down clamp lock design for secure mounting to rail
Heavy duty polymer construction with hardened steel stud
Part #: UEM
Fits: Picatinny Rail
Made Of: Polymer/Steel
Weight (oz): 1
Width (in): 1”
Length (in): 2.5”
Height (in): 1”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CPS
Center Pivoting Sling Mount
Provides multiple sling mounting points and a sling mount for weapons
with Picatinny rail.
Lightweight and strong
Screw tightened
Captive nut uses flathead screw driver or wrench
Accommodates sling webbing up to 1.25”
Part #: CPS
Fits: Picatinny Rail
Made Of: Aluminum
Weight (oz): 0.96
Width (in): 1.6”
Length (in): 0.56”
Height (in): 1.6”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SPS
Quick Release Rotating Sling Mount
Provides multiple sling mounting points and a sling mount for weapons
with any Picatinny rail.
Side pivoting sling mount
Requires PBSS sling swivel (not included). SPSPBSS includes both
SPS + PBSS (shown)
SPS
Captive nut uses flathead screw driver or wrench
Part #: SPS
Fits: Picatinny Rail
Made Of: Aluminum
Weight (oz): 0.64
SPSPBSS
Width (in): 1.6”
Length (in): 0.56”
Height (in): 0.75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
63
AR15/M16/M4 CARBINE
SLING MOUNTS
OPSMP
AR15/M16 Push Button Sling Swivel Sling Mount
Accommodates one point slings using a push button sling swivel. No tube
disassembly; simply remove collapsible buttstock, slide over tube, position
properly and secure. Easy and fast installation. CNC machined from aluminum
with matte black finish. PBSS not included.
Ambidextrous design
Easy and fast installation. No tools required
No tube disassembly or removal, simply remove collapsible
buttstock, slide over tube position properly and secure
CNC machined from aluminum with matte black finish
No gunsmithing required
Part #: OPSMP
Fits: AR15/M16
Made Of: Aluminum
Weight (oz): 0.64
Width (in): 1.6”
Length (in): 0.56”
Height (in): 0.75”
OPSMPPBSS
OPSMP
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
OPSM
AR15/M16 One Point Sling Mount
Sling mount positioned behind receiver provides a comfortable,
ambidextrous balanced weapon carry.
Best Seller
No tube disassembly or removal, simply remove collapsible
buttstock, slide over tube position properly and secure
Use with single point carabiner slings or sling webbing up to 1.25”
Ambidextrous design
Easy and fast installation. No tools required
CNC machined from aluminum with matte black finish
No gunsmithing required
Part #: OPSM
Fits: AR15/M16
Made Of: Aluminum
Weight (oz): 0.64
Width (in): 2.25”
Length (in): 0.625”
Height (in): 2.125”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
PBSS
Push Button Sling Swivel
Provides multiple sling mounting points and a sling mount for weapons
with any Picatinny rail.
Best Seller
Push button design for quick detachment. 1.625” rugged all blued
steel sling swivel. Sturdy 0.2” thick steel ring
Accepts slings up to 1.6” without binding
Part #: PBSS
Fits: Sling Mount
Made Of: Steel
Weight (oz): 0.64
64
Width (in): 1.376”
Length (in): 2”
Height (in): 1.38”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
FOR SLING MOUNTS
SLINGS
OPS/OPS1
One Point Sling
Ideal for close quarters combat, allows easy movement when
operating inside tight spaces. Maintains its structure and provides a
comfortable carry option.
Fully adjustable sling fits all body sizes
Side release buckle allows for quick release if sling encounters
interference with objects
Best Seller
OPS
Strong metal carabiner for easy attachment
High density bungee cord and carabiner are covered to reduce noise
and wear
Sling can be worn on back freeing hands for other tasks
Sling easily snaps onto many mounting locations
OPS1
Part #: OPS/OPS1
Fits: Sling Mount
Made Of: Nylon
Weight (oz): 4.48
OPS Max Loop (in): 60”
OPS1 Max Loop (in): 70”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
TPS
Three Point Sling
Proven three-point design for carbine style M16/AR15. Sling wraps around
handguard, Velcro secured. Attaches to collapsible stock or rifle stock.
Quick release buckle detaches sling from operator instantly, and also
allows for easy donning with body armor
Fully adjustable and totally ambidextrous
Constructed from 1.5” ballistic nylon
Part #: TPS – AR15 Carbines
Part #: TPSR – Rifles
Made Of: Nylon
Weight (oz): 4.48
Max Loop (in): 2.59”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SAW
Shoulder Pad Sling
Shoulder pad distributes weight over a larger area for extra comfort
when carrying heavy weapons. The 4” wide, 1” thick, and 33” long
padding is protected in a Cordura outer covering with a mesh lining for
wicking moisture on the underside. 2” wide nylon webbing. Equipped
with heavy duty metal safety hooks.
Part #: SAW
Fits: Sling Mount
Made Of: Nylon
Weight (oz): 10.6
Length (in): 57-75”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
65
FOR SLING MOUNTS / PISTOLS
SLINGS / PISTOL CONCEALMENT POUCHES
6003
Two Point Sling
The ideal two point sling for tactical weapons.
Quick release buckle detaches sling from operator instantly, and also
Small integral pouch on sling for storage
Quick adjustment sling with polymer hooks for silent movement.
Paracord included
Slide release buckle for quick conversion from patrol mode to
weapon ready
Part #: 6003
Fits: Sling Mount
Made Of: Nylon
Weight (oz): 4.48
Length (in): 60”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
5006
Concealment Pouch
Great for jogging or traveling. Features a detachable sturdy
polyethylene backplate with a neoprene slot to securely hold your
handgun.
Ambidextrous quick pull-tab for fast handgun access
Three zippered front pockets hold accompanying items
Constructed of 500 denier Cordura
Fits up to 4” revolvers and medium/large semi-autos
Adjustable 2” nylon strap with side buckle fits waists up to 49”
Part #: 5006
Made Of: Nylon
Weight (oz): 11.2
Length (in): 60”
Height (in): 70”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
5009
Shoulder Bag Holster
Covert shoulder bag is a 9” x 7.25” concealment holster bag that hangs
casually from the shoulder. Constructed of 500 denier Cordura.
Quick release buckle detaches sling from operator instantly, and also
allows for easy donning with body armor
Fully adjustable and totally ambidextrous
Sling constructed from 1.5” ballistic nylon. Quick release buckle
detaches sling from operator instantly, and also allows for easy
donning with body armor
Fully adjustable and totally ambidextrous
Part #: 5012
Made Of: Nylon
Weight (oz): 15
Length (in): 11.5”
Height (in): 8”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
66
ACCESSORIES
CONCEALMENT POUCHES / PISTOL ACCESSORIES
5012
Concealment Pouch
Ideal for storing more than your firearm, the Covert II measures 8”
x 11.5”. Easy access to contents without exposing your handgun.
Handgun is hidden behind the main compartment in a concealed
pocket. Constructed of 500 denier Cordura.
Quick release buckle detaches sling from operator instantly, and also
allows for easy donning with body armor
Fully adjustable and totally ambidextrous
Sling constructed from 1.5” ballistic nylon
Part #: 5012
Made Of: Nylon
Weight (oz): 15
Length (in): 11.5”
Height (in): 8”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
RCB1/RCB2
Rotating Picatinny Rail Belt Clip
Mount a Picatinny rail accessory to your belt.
Recommended for use with our flashlight/laser mounts (PL or PLS
Series), the .223 magazine holder (MPS) or the five 12 gauge shot
shell holder (SSM) as pictured
360º rotation. Locks in 17 positions
Allows hands free flashlight use while patrolling, questioning, reading
maps and documents
2 Belt sizes available, 2”(RCB1), 2.25”(RCB2)
Part #: RCB1 – 2”
Part #: RCB1 – 2.25”
Made Of: Polymer
Weight (oz): 4.48
Width (in): 0.875”
Length (in): 1.5”
Height (in): 2.25”
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
SAFE-T-STIX
9MM, .223, 7.62 x 39MM Barrel Plugs
Solution to safe training practice, instruction, display and gun storage.
Securely blocks barrel and prevents live round from being chambered.
Bright and visible colors. Sizes fit 9mm pistols, and .223, and 7.62 x
39mm rifle barrels.
Part #: TS9, TS223, TS762, TS9MP5
Fits: 9mm, .223, 7.62 x 39, 9mm MP5 and other models
Made Of: Polymer
Sold individually or in packs of 10 – Call for details
67
01
Black
MIL-Spec
Lifetime Warranty
No gunsmithing required
CAA 2015 CATALOG | WWW.COMMANDARMS.COM | [email protected] | 1-866-611-9576
CAA USA
WWW.COMMANDARMS.COM
[email protected]
1-866-611-9576
CAA INTERNATIONAL
WWW.CAA-IL.COM
[email protected]
FACEBOOK
WWW.FACEBOOK.COM/CAAUPGRADE