1. Art and Diseño

30
th
RCI International
Convention And Trade Show
Three Decades of
Building Innovation
Roofing
Waterproofing
Exterior Walls
March 5 - 10, 2015 | San Antonio, Texas
1
Welcome From the RCI President
Dear RCI Members, Friends, and Colleagues:
The 30th Annual RCI International Convention & Trade Show will be held March 5-10, 2015, in
San Antonio, Texas. This year’s event is titled “Three Decades of Building Innovation,” which
gives us an opportunity to reflect on the incredible growth of RCI and the building envelope
industry, as well as look forward to our exciting future. Please accept my invitation to attend and
be part of this annual don’t-miss event.
The Convention will be held at the San Antonio Convention Center and Grand Hyatt Hotel,
located on the famous River Walk in downtown San Antonio. The locale offers history, arts, and
entertainment, which provide an outstanding backdrop for our convention activities.
The Convention Committee, under the leadership of Second Vice President Robért Hinojosa,
has done an outstanding job of selecting educational programs and providing an impressive
lineup of speakers and subjects. From Weather to Waterproofing to Wind Resistance, the variety
of topics will challenge any interest. Twenty-two seminars will be available, and two Auxiliary
Seminars will be offered for more in-depth analysis of current roofing and exterior wall issues.
RCI President
Sidney I. Hankins III, RRC, AIA
The Convention kicks off with two Friday (March 6) activities – The President-Elect’s Golf Tournament, honoring President-Elect Jean-Guy Levaque; and a Shooting Clays Tournament. The
golf tournament will be held at the Hyatt Hill Country Golf Club, while the clays competition
will be at the National Shooting Complex, headquarters of the National Sporting Clays Association. Friday night will offer a reception for first-time attendees and emerging professionals.
Spouses and convention guests will also have opportunities to get together with a luncheon on
Friday and special trips and tours on Saturday and Monday. Be sure to let your spouse or guest
know about these activities, and register because they always fill up.
Our Opening Ceremony is Saturday, and I am excited to announce that Dr. Jerry Punch will be our keynote speaker. Dr. Punch is a former
college football player, emergency medicine physician and chief-of-staff, ESPN college football and basketball announcer, and ESPN motor
sports announcer and reporter for NASCAR and the Indy 500. A native of North Carolina, Dr. Punch earned degrees from NC State and
Wake Forest Universities and was a recipient of the United States Air Force’s Outstanding Performance Award.
Our Trade Show begins Saturday and runs through Sunday. A record number of vendors are registered, and the show is always regarded
as among the best in the Industry. Frequent product demonstrations are scheduled, and Saturday night caps off with the exhibitors’ hospitality receptions, a great chance to meet friends and enjoy good times, refreshments and entertainment.
The RCI Foundations’ Reception and Auction on Sunday is a must event on your convention calendar. Bring your credit card or checkbook
and support their efforts to advance the knowledge of the building envelope through funded publications, educational programs, and
research grants.
The Annual Meeting on Monday will allow us to address the business side of RCI and the election of our officers and leaders. And please
join me that evening for the President’s Reception and Banquet.
I expect this year’s convention to be one of our best, and I sincerely hope to see you there!
Special Thanks to These Platinum Sponsors
2
Introduction From the Executive Vice President and CEO
Dear RCI Members and Friends,
Thirty years ago, in 1984, RCI held A National Conference in Atlanta, Georgia. According to
historical records, there were about 100 attendees. From that great starting point, a lot has
changed. I hope you are planning to join us in San Antonio as we celebrate 30 years of the
evolution of the RCI International Convention and Trade Show.
Based on your feedback, and in an effort to continually improve the convention, we have
made a few minor adjustments to the schedule. On Friday, in addition to the President
Elect’s Golf Tournament at the magnificent Hill Country Golf Club, there will be a sporting
clays outing at the National Shooting Complex. The events are simultaneous, so be sure to
pick your vice and sign up.
We will also be holding two auxiliary seminars on Friday—one on exterior concrete walls
and one on design of vegetative roofs. Since our two largest registration examinations are
now offered in computer-based format, it will not be necessary to hold them at the convention. We have filled that time by moving our auxiliary seminars from our typical Tuesday
spot to Friday, potentially eliminating a day away from the office while taking advantage of
these additional programs.
We will maintain the schedule change we implemented last year of beginning our Saturday
program with morning educational offerings followed by the regional meetings with lunch.
Following our keynote speaker, Dr. Jerry Punch, our trade show will be open from 3:15 PM
to 7:15 PM.
RCI Executive Vice President and CEO
James. R. Birdsong
I am extremely pleased to announce the return of Sunday morning trade show cash awards.
All fully registered attendees will be given tickets for cash prizes drawings that will be held
Sunday morning during the trade show. You must be present to win. Be there early for those
first cash drawings while visiting with our numerous supporting exhibitors. Please note that we have made a few minor changes to the
Sunday schedule. We invite you to join our nondenominational religious service beginning at 7:45 AM. The trade show will open at 8:45
AM with a full breakfast buffet—another reason to be there early!
We have also scheduled the Sunday Foundations’ auction one hour earlier this year. It will begin at 5:30 PM and conclude by 7:00 PM.
We received numerous requests to make a change that provides time for everyone to attend the auction and still join friends for dinner
and networking. There should no longer be a conflict and, therefore, no excuse. So please join us at the Foundations' auction and find
that item or items that you cannot live without, while supporting the organizations that support you.
We have a lot planned for you. While you are encouraged to review the program carefully, also check out the new RCI Convention app
for Apple and Android smart devices, which will provide complete schedule details.
Your professional staff and volunteer leaders have worked hard to bring you the best possible annual convention, so please plan to join
us in magnificent San Antonio. You will gain from the experience, and your RCI friends and colleagues will gain from your participation. San Antonio is a great place to visit, and your spouse will enjoy the experience of the River Walk area. We look forward to seeing
you both!
Nos vemos en San Antonio.
Roofing and Waterproofing Systems
Waterproof Expansion Joints
3
Hotel Accommodations and Local Travel
Grand Hyatt San Antonio
600 E. Market Street
San Antonio, TX 78205
grandsanantonio.hyatt.com
Breathe in the scent of Tex-Mex cuisine, listen to the joyous music of the mariachis, and watch as barges float
down the San Antonio River. You'll discover an array
of attractions and things to do convenient to the Grand
Hyatt San Antonio. Almost everything is accessible by
foot, river taxi, or trolley.
The Grand Hyatt San Antonio is located right on the
River Walk, the largest urban ecosystem in the nation.
Tucked quietly below street level and only steps from the
Alamo, the River Walk provides a serene and pleasant
way to navigate the city. Ride a river cruiser, rent a bicycle or take your time seeing the sights on foot. With 15
miles of sidewalks and paths, the River Walk provides
access to museums, the King William Historic District,
300-year-old Spanish missions, hotels, shops, and restaurants, with a new adventure around every turn.
Reservation Information
210-224-1234 or 888-421-1442
https://aws.passkey.com/g/23972184
Refer to RCI Int'l. Convention & Trade Show.
Room Rates
l
l
for
Reservation Deadline
February 6, 2015
RCI Convention Attendees
$189 – single/double l $214 – triple l $239 – quadruple
$289 – two-bay hospitality suite (based on availability)
Complimentary in-room Internet access is available for all guests.
Complimentary fitness center access is available for all guests.
Make your reservation directly with the hotel by the
date above to receive these special room rates.
Refer to group name: RCI International Convention and
Trade Show. Taxes: 16.75% room tax.
Check-in: 4:00 PM | Check-out: 11:00 AM
Hotel early departure fee: Guarantee/deposit will not be refunded unless the individual reservation is cancelled 72 hours in advance.
Group rates available three days pre/post of official convention dates. No charge for children under the age of 17 years of age.
Parking
Discounted self-parking for all convention attendees is offered for the duration of the convention. $18.00 per day.
Ground Transportation: Shuttle
or
Taxi
Shuttle transportation to and from San Antonio International Airport and downtown (8 miles) is provided for a fee by SATRANS.
SATRANS is the city's official airport shuttle. It runs between 7:00 AM and 1:00 AM daily. For more information, call 210-281-9900 or
visit www.saairportshuttle.com. A taxi from the airport to the hotel is approximately $30.
Tourism, Entertainment,
and
Attractions
From the Missions to the Hill Country, San Antonio offers so many things for visitors to see and do, ranging from major theme parks
to the River Walk lined with restaurants, patios, galleries and shops. The city is filled with culturally significant arts, history, museums and architecture.
Read about the many things to do, including the River Walk, the Alamo and historic missions, theme parks, museums, shopping venues, and dining opportunities in San Antonio at visitsanantonio.com.
4
President-Elect’s Golf Tournament
Friday, March 6
Shuttle Departs – 7:00 AM
Registration and Breakfast – 7:30 AM - 8:30 AM
Tee-off – 8:30 AM
Located on the grounds of the Hyatt Regency Hill Country Resort and Spa, the Hill Country Golf Club meets all the standards
of a truly great golf club. The championship course is a beautiful, dramatic and balanced 27-hole facility designed by the nationally acclaimed golf course architectural firm, Arthur Hills
and Associates.
Hyatt Hill Country Golf Club
Set on more than 200 acres, the Hill Country Golf Club has a
wide-ranging terrain with rolling meadows, steep hillsides,
wooded ravines and tree-shaded plateaus, as well as the tranquil threat of lakes and ponds.
800 Hyatt Resort Drive
San Antonio, TX
hyatthillcountrygolf.com
210-520-4040
Deemed one of the "Best Places to Play" according to Golf Digest and named a "Texas Leading Golf Resort" by World Travel
Awards, we invite you to experience unforgettable San Antonio,
Texas golf at the Hill Country Golf Club.
Tournament Fee – $200 per person
Exclusive sponsor: DERBIGUM Americas, Inc.
Sporting Clay Tournament
Friday, March 6
Shuttle Departs – 7:30 AM
Registration and Breakfast – 8:00 AM - 9:00 AM
Starting Time – 9:00 AM
Located along the edge of the beautiful Texas Hill Country, the National Shooting Complex is more than 671 acres of peaceful rolling
hills and picturesque countryside. To firearms enthusiasts throughout the United States and beyond, this multi-million-dollar complex
is known as one of the most complete sport shooting and recreational facilities in the world.
Each registration includes instruction, instructors/safety staff, ear
and eye protection, guns, targets, ammo, golf carts (1 cart per 4
shooters), tournament scoring, and transportation.
The tournament will consist of teams of four participants shooting clays on one of two courses designed to simulate various game birds.
Shooters who do not submit a foursome will be assigned a group by the club pro's system. Participants will be provided with tournament rules onsite. The sporting clay tournament will be organized as a shotgun start beginning at 9:00 AM. Team sign in begins upon
arrival with coffee and continental breakfast. A lunch buffet including drinks (non-alcoholic) will be provided. The event will conclude
with an awards ceremony.
National Shooting Complex
5931 Roft Road
San Antonio, TX
nationalshootingcomplex.com
210-688-3371
Tournament Fee – $200 per person
Team Sponsorship – $1000
(includes four shooters and sponsor sign)
5
Engaging Activities, Events, and Entertainment
Keynote Speaker — Dr. Jerry Punch, Motorsports Broadcaster
Saturday, March 7 — 1:30 PM to 3:15 PM Physician. Broadcaster. Hero. Father. These are just some of the many words one can use to describe Dr. Jerry Punch. Whether he is
saving lives, commentating on races and college football, or enjoying time with his family, Dr. Jerry Punch gives it his all. As evidenced
by his impressive resumé, he is someone who takes pride in his actions, and it shows.
Jerry Punch began his career in 1971 at North Carolina State University (NCSU), where he majored in pre-med and graduated magna
cum laude. Not limited to academic success, Punch was also a walk-on quarterback for Coach Lou Holtz.
Following his graduation from NCSU, Punch attended medical school at
Wake Forest University from 1975 until 1979. He then went on to become an
emergency room doctor from 1982 until 1986, before taking on even greater
responsibility by forming LL. Punch & Associates. From 1986 until 1992, Dr.
Jerry Punch and his staff of 14 ER physicians worked to treat the patients of
central Florida.
Dr. Punch is a man of many talents. While working as an emergency physician, he simultaneously became a well-known face as an auto racing broadcaster. After eight years of national radio broadcasts, Dr. Jerry Punch began
working selected motorsports events on ABC's “Wide World of Sports" in
1987. He has served as both pit commentator and expert booth analyst alongside veteran host Keith Jackson. In 1989, Dr. Punch became a regular member
of the Emmy Award-winning ABC sports team, providing coverage for the
Indianapolis 500. As a physician/pit commentator, he has provided valuable
insight into both mechanical and medical strategies as they unfold relative to
the driver and crew members during the telecast.
Punch serves as both play-by-play and pit analyst on ESPN. A full-time
member of ESPN's ACE Award-winning broadcast team since 1987, the doctor appears on more than 60 ESPN telecasts a year.
Not limited to auto racing, Punch can also be found at some of the best college football match-ups in the country. He usually is seen roaming the sidelines updating fans on injuries, predicting plays, and discussing locker room
strategies. Recently, he has handled play-by-play chores for select college
football games on ESPN and ESPN2.
Most notably, Dr. Jerry Punch participated in saving two drivers from certain death in 1988. While preparing for an ESPN telecast of the Busch 500, Punch witnessed a crash of the car driven by Rusty Wallace.
When he reached the vehicle, Wallace was not breathing. Jerry Punch revived Wallace and assisted the emergency crew in removing
the injured driver from the wreck. Later that year while on another television assignment (ARCA race in Atlanta), Dr. Punch helped to
save driver Don Marmor after a tremendous impact flipped his car three times. Marmor had no pulse, but Dr. Punch assisted raceway
emergency crews in their attempt to stabilize him on the scene until arrival of the Lifeline helicopter. When Marmor was airlifted from
the track, he had a strong pulse, stable blood pressure, spontaneous breathing, and survived the incident.
Suggested Attire
Convention and Trade Show
Business casual
6
Awards Luncheon
Business casual
RCI Foundation Event
Casual
President’s Reception/ Banquet
Casual
Engaging Activities, Events, and Entertainment
Regional Meetings (with
box lunch)
Saturday, March 7 — 11:15 AM to 1:15 PM
Enjoy a box lunch with your fellow members while you discuss issues important to your region.
Awards Luncheon
Sunday, March 8 — 12:30 PM to 1:45 PM
Don’t miss this celebratory gathering as RCI recognizes its outstanding members and volunteers. Support your peers and enjoy the
camaraderie at this tasty luncheon.
RCI Foundation United States and
RCI Foundation Canada Reception and Event
Sunday, March 8
5:30 PM to 7:00 PM — Auctions and Raffles
Please plan to attend the RCI Foundations' annual fundraiser. The price of admission is $10.00. The auction is a chance to hang loose
with friends and to bring something home from your trip for your spouse and kids while supporting the RCI Foundations’ missions.
Whether you bid during the silent auction or the live auction, there is always something for every taste and budget. Just ask some of last
year’s attendees – great deals abound!
Special thanks to GAF Materials Corporation for its tenth year of generous sponsorship for this event and also to everyone who donates
items and/or attends the auction.
For additional information about the RCI Foundation Auction or to donate, please contact Richard Gardner by e-mail at [email protected].
Annual Meeting
of the
Members (Luncheon)
Monday, March 9 — 12:00 PM to 2:00 PM
This is the RCI members’ business meeting and annual election. Members sit down for a meal to discuss RCI business and to select leaders for the upcoming year. Boxed lunches will be served.
President’s Reception
and
Annual Banquet
Monday, March 9 — 6:30 PM to 7:30 PM (Reception)
Monday, March 9 — 7:30 PM to 11:00 PM (Banquet)
Here’s your chance to reminisce with fellow members over a sumptuous meal and lively entertainment. Entertainment this year will
be provided by comedian and impressionist Dave Burleigh.
Annual Banquet Entertainment — Dave Burleigh
Comedian and impressionist Dave Burleigh's star is on the rise. His uncanny ability to impersonate just about anyone landed him the starring role as Charlie Sheen in "Not Another Celebrity
Movie.” Burleigh's multiple characters, voices, and impressions were showcased on the 2012 season of America's Got Talent, where he became a fast favorite of both judges and fans alike. Judge
Howard Stern said, "You have an excellent command of the stage." Fellow comedian and judge
Howie Mandel added, "Your impressions were spot on." Burleigh's laid-back and easy-going style
and persona on stage—contrasted with his unique facial and body expressions—are guaranteed to
leave audiences amazed and impressed.
Burleigh and his band are constantly working on impressions for his new theater show, "Impressive." This talented singer, musician, actor, comedian and host tours the world for over 36 weeks a
year and headlines at all the major casinos in Las Vegas.
7
Educational Programs Quick View
Friday, March 6
8:00 AM - 3:00 PM
•
Auxiliary Seminar: Exterior Concrete Wall Systems* [EP]
•
Auxiliary Seminar: Vegetative Roofs for the Design Professional*
Saturday, March 7
Educational Programs – Concurrent
•
Fenestrations
7:45 AM - 9:15 AM
•
Selection and Use of Sealants on the Exterior Building Envelope [EP]
and
•
Development of a Standard Test Method to Determine the Wind Resistance of Vegetated Roof Assemblies
9:30 AM - 11:00 AM
•
Reroofing Over a Wet Concrete Substrate [EP]
•
Quantifying the Hydrological Performance of Extensive Vegetative Roofs
•
Waterstreet at Celebration Condominiums: A Case Study of How to Design for a Wet Climate
3:15 PM - 7:15 PM
Trade Show – Grand Opening and Reception
Sunday, March 8
8:45 AM - 12:00 PM
Trade Show – Full Breakfast Buffet and Cash Prizes
Educational Programs – Concurrent
•
RCI and SMACNA: An Introduction to the Architectural Sheet Metal Flashing Quality Assurance Guide [EP]
2:15 PM - 3:45 PM
•
Whetherability: How Do Architectural Design Students Consider the Building Envelope?
and
•
Product Disclosure: An Emerging Challenge for the Building Envelope Consultant
4:00 PM - 5:30 PM
•
Consultant and Contractor Collaboration: Understanding Roles and Responsibilities for Successful
Building Envelope Construction and Rehabilitation Projects [EP]
•
Innovative Repairs to Terra Cotta Parapets and Cornices
•
The Great Debate: Nonreflective vs. Reflective Roofing Membranes
Monday, March 9
Educational Programs – Concurrent
8:45 AM - 10:15 AM
and
10:30 AM - 12:00 PM
•
Understanding Low-Sloped (Hydrostatic) Standing-Seam Metal Roofs
•
Wind Load Design Specs and Air Barrier Performance Levels
•
Glazing Failures and Ways to Prevent Them [EP]
•
Strategies for Energy-Efficient and Fire-Resistant Building Enclosure Details [EP]
•
Innovative Waterproofing Solutions for Blind-Side Applications Using Prefabricated
Modified-Bituminous Sheet Membranes
•
The Environmental Impact of Roofing Systems: Ten Life-Cycle Indicators
Educational Programs – Concurrent
2:15 PM - 3:45 PM
and
4:00 PM - 5:30 PM
•
Weather-Related Effects on the Installation of Fully Adhered Single-Ply Systems [EP]
•
The Problems With and Solutions for Ventilated Attics [EP]
•
Not All Glass-Mat Sheathings Are Created Equal
•
Stucco Detailing for Buildings With Unique Geometry
Programs For Emerging Professionals Educational programs designated with the [EP] tag above indicate sessions noted
by the Emerging Professionals Committee as recommended for young or emerging building envelope professionals.
8
Continuing Education Credit RCI | Registered attendees will receive RCI Continuing Educational Hours (CEHs) based
on hourly attendance at educational programs. Attendees will earn 2.0 CEHs for spending up to four hours on the trade show floor
and 3.0 CEHs for more than four hours. AIA | All educational programs are registered to provide Learning Units for AIA members. Each program provides 1.0 LUs per hour of attendance. All educational presentations offer Health Safety Welfare (HSW) credit.
*Auxiliary Seminars | Auxiliary Seminars are available at additional cost. See registration form for details. Auxiliary Seminars offer
12 RCI CEHs and 6 AIA LUs.
Schedule of Events
Thursday, March 5
7:30 AM - 12:30 PM
RICOWI Board & General Membership Meeting
7:30 AM - 4:00 PM
Convention Registration
7:30 AM - 4:00 PM
Internet Café and Marketplace
7:30 AM - 4:00 PM
Spouse/Guest Lounge
8:00 AM - 5:00 PM
RCI Committee Meetings
9:30 AM - 10:30 AM
New Officer/Director Orientation
11:00 AM - 4:00 PM
2014 - 2015 Board of Directors Meeting
1:30 PM - 6:00 PM
RICOWI Board and General Membership Meeting (continued)
Friday, March 6
7:00 AM - 8:00 AM
RICOWI Breakfast
7:00 AM
Shuttle Departs for President-Elect's Golf Tournament
7:30 AM
Shuttle Departs for Sporting Clay Tournament
7:30 AM - 8:30 AM
President-Elect's Golf Tournament Registration and Breakfast
7:30 AM - 5:00 PM
Convention Registration
7:30 AM - 5:00 PM
Internet Café and Marketplace
7:30 AM - 5:00 PM
Spouse/Guest Lounge
8:00 AM - 9:00 AM
Sporting Clay Tournament Registration and Breakfast
8:00 AM - 11:30 AM
RWC Exam - Part 1
Auxiliary Seminars - Concurrent
8:00 AM - 3:00 PM
•
Exterior Concrete Wall Systems
•
Vegetative Roofs for the Design Professional
8:00 AM - 12:00 PM
REWC Exam
8:00 AM - 5:00 PM
RICOWI Roofing Seminar
8:30 AM
Tee-off – President-Elect's Golf Tournament
9:00 AM
Start of Sporting Clay Tournament
12:00 PM - 1:00 PM
RICOWI Lunch
12:00 PM - 1:30 PM
Lunch On Your Own
12:15 PM
Shuttle Departs for Spouse/Guest Luncheon at the Guenther House (with tour)
12:30 PM - 3:30 PM
Spouse/Guest Luncheon at the Guenther House (with tour)
12:30 PM - 5:15 PM
RWC Exam - Part 2
1:00 PM - 6:00 PM
Trade Show Exhibit Setup
3:00 PM - 4:00 PM
Train the Trainer
4:00 PM - 6:00 PM
Committee Meetings
6:00 PM - 7:00 PM
First-time Attendee & Emerging Professionals Reception
Saturday, March 7
7:00 AM - 4:00 PM
Convention Registration
7:00 AM - 4:00 PM
Internet Café and Marketplace
7:00 AM - 4:00 PM
Spouse/Guest Lounge
7:30 AM - 12:00 PM
RCI Foundations Board of Directors Meetings (U.S. and Canada)
Educational Programs — Concurrent
7:45 AM - 9:15 AM
•
•
•
•
•
•
Fenestrations
Selection and Use of Sealants on the Exterior Building Envelope
Development of a Standard Test Method to Determine the Wind Resistance of Vegetated Roof Assemblies
Reroofing Over a Wet Concrete Substrate
Quantifying the Hydrological Performance of Extensive Vegetative Roofs
Waterstreet at Celebration Condominiums: A Case Study of How to Design for a Wet Climate
9
Schedule of Events
8:00 AM - 1:00 PM
Trade Show Exhibit Setup
9:15 AM - 9:30 AM
Break
Educational Programs — Concurrent
9:30 AM - 11:00 AM
•
•
•
•
•
•
Fenestrations
Selection and Use of Sealants on the Exterior Building Envelope
Development of a Standard Test Method to Determine the Wind Resistance of Vegetated Roof Assemblies
Reroofing Over a Wet Concrete Substrate
Quantifying the Hydrological Performance of Extensive Vegetative Roofs
Waterstreet at Celebration Condominiums: A Case Study of How to Design for a Wet Climate
9:45 AM
Shuttle Departs for Spouse/Guest Outing — San Antonio Botanical Gardens
10:00 AM - 12:30 PM
Spouse/Guest Outing — San Antonio Botanical Gardens
11:15 AM - 1:15 PM
Regional Meetings (With Box Lunch)
11:45 AM - 12:15 PM
Exhibitor Briefing
1:30 PM - 3:15 PM
Opening Ceremony and Keynote Presentation with Dr. Jerry Punch
3:15 PM - 7:15 PM
Trade Show — Grand Opening and Reception
4:15 PM - 4:45 PM
Product Demonstration by Dow Building Solutions — Trade Show Floor
5:15 PM - 5:45 PM
Product Demonstration by Malarkey Roofing Products — Trade Show Floor
6:15 PM - 6:45 PM
Product Demonstration by DaVinci Roofscapes — Trade Show Floor
7:15 PM - 7:45 PM
Exhibitors’ Booth Selection Meeting for 2016 Trade Show
7:15 PM - 10:00 PM
Exhibitors’ Hospitality Receptions
Sunday, March 8
7:45 AM - 8:45 AM
Nondenominational Worship Service
8:00 AM - 4:00 PM
Convention Registration
8:00 AM - 4:00 PM
Internet Café and Marketplace
8:00 AM - 4:00 PM
Spouse/Guest Lounge
8:45 AM - 12:00 PM
Trade Show with Full Breakfast Buffet
9:30 AM - 10:00 AM
Product Demonstration by Hunter Panels — Trade Show Floor
10:30 AM - 11:00 AM
Product Demonstration by Henry Company — Trade Show Floor
12:00 PM - 8:00 PM
Trade Show Exhibit Dismantle
12:30 PM - 1:45 PM
Awards Luncheon
Educational Programs — Concurrent
2:15 PM - 3:45 PM
•
•
•
•
•
•
3:45 PM - 4:00 PM
RCI and SMACNA: An Introduction to the Architectural Sheet Metal Flashing Quality Assurance Guide
Whetherability: How Do Architectural Design Students Consider the Building Envelope?
Product Disclosure: An Emerging Challenge for the Building Envelope Consultant
Consultant and Contractor Collaboration: Understanding Roles and Responsibilities for Successful Building
Envelope Construction and Rehabilitation Projects
Innovative Repairs to Terra Cotta Parapets and Cornices
The Great Debate: Nonreflective vs. Reflective Roofing Membranes
Break
Educational Programs — Concurrent
4:00 PM - 5:30 PM
•
•
•
•
•
•
10
RCI and SMACNA: An Introduction to the Architectural Sheet Metal Flashing Quality Assurance Guide
Whetherability: How Do Architectural Design Students Consider the Building Envelope?
Product Disclosure: An Emerging Challenge for the Building Envelope Consultant
Consultant and Contractor Collaboration: Understanding Roles and Responsibilities for Successful Building
Envelope Construction and Rehabilitation Projects
Innovative Repairs to Terra Cotta Parapets and Cornices
The Great Debate: Nonreflective vs. Reflective Roofing Membranes
5:30 PM - 7:00 PM
RCI Foundations' Reception and Event
7:00 PM
Dinner on Your Own
Schedule of Events
Monday, March 9
7:30 AM - 5:00 PM
Convention Registration
7:30 AM - 5:00 PM
Internet Café and Marketplace
7:30 AM - 5:00 PM
Spouse/Guest Lounge
Educational Programs — Concurrent
8:45 AM - 10:15 AM
•
•
•
•
•
•
10:15 AM - 10:30 AM
Understanding Low-Sloped (Hydrostatic) Standing-Seam Metal Roofs
Wind Load Design Specs and Air Barrier Performance Levels
Glazing Failures and Ways to Prevent Them
Strategies for Energy-Efficient and Fire-Resistant Building Enclosure Details
Innovative Waterproofing Solutions for Blind-Side Applications Using Prefabricated Modified-Bituminous
Sheet Membranes
The Environmental Impact of Roofing Systems: Ten Life-Cycle Indicators
Break
Educational Programs — Concurrent
10:30 AM - 12:00 PM
•
•
•
•
•
•
Understanding Low-Sloped (Hydrostatic) Standing-Seam Metal Roofs
Wind Load Design Specs and Air Barrier Performance Levels
Glazing Failures and Ways to Prevent Them
Strategies for Energy-Efficient and Fire-Resistant Building Enclosure Details
Innovative Waterproofing Solutions for Blind-Side Applications Using Prefabricated Modified-Bituminous
Sheet Membranes
The Environmental Impact of Roofing Systems: Ten Life-Cycle Indicators
9:45 AM
Shuttle Departs for Spouse/Guest Outing— A Day in the Gruene Historical District
10:00 AM - 3:00 PM
Spouse/Guest Outing— A Day in the Gruene Historical District
12:00 PM - 2:00 PM
Annual Meeting of the Members (lunch served)
2:00 PM - 2:15 PM
Break
Educational Programs — Concurrent
2:15 PM - 3:45 PM
3:45 PM - 4:00 PM
•
•
•
•
Weather-Related Effects on the Installation of Fully Adhered Single-Ply Systems
The Problems With and Solutions for Ventilated Attics
Not All Glass-Mat Sheathings Are Created Equal
Stucco Detailing for Buildings With Unique Geometry
Break
Educational Programs — Concurrent
4:00 PM - 5:30 PM
6:30 PM - 11:00 PM
•
•
•
•
Weather-Related Effects on the Installation of Fully Adhered Single-Ply Systems
The Problems With and Solutions for Ventilated Attics
Not All Glass-Mat Sheathings Are Created Equal
Stucco Detailing for Buildings With Unique Geometry
President’s Reception and Annual Banquet
Tuesday, March 10
7:30 AM - 9:00 AM
Breakfast - Board of Directors and Affiliated Chapter Presidents
7:30 AM - 11:00 AM
Convention Registration
7:30 AM - 11:00 AM
Internet Café and Marketplace
7:30 AM - 11:00 AM
Spouse/Guest Lounge
9:00 AM - 1:00 PM
2015 - 2016 Board of Directors Meeting
11
Educational Programs
Friday, March 6 | 8:00 am - 3:00 pm
Auxiliary Seminar: Exterior Concrete Wall Systems
Kami Farahmandpour, FRCI, RRC, RWC, REWC, RBEC, PE, CCS, CCCA – Building Technology Consultants, PC, Arlington Heights, IL
Joshua Summers, REWC, SE, PE – Building Technology Consultants, PC, Arlington Heights, IL
This seminar is an abbreviated version of the newly developed two-day Exterior Concrete Wall Systems course. This course
is the third specific exterior wall course that builds upon the fundamentals presented in Exterior Walls Technology and Science. The purpose of the course is to provide an in-depth understanding of exterior concrete wall systems that serve as part
of the building envelope system. This seminar will review highlights of the course, including a general overview of exterior concrete wall systems; key material properties of concrete that affect its use in building envelope systems; and evaluating, repairing,
and maintaining exterior wall systems. The seminar will include a case study of a typical exterior concrete wall repair project.
Kami Farahmandpour is the principal of his firm. His expertise is concentrated in the evaluation and repair of building envelopes, including various types of exterior walls, waterproofing systems, and roofs. Among his many professional activities, he has served a three-year term as an associate director of the Sealant, Waterproofing and Restoration
Institute (SWRI). He also is the coauthor of A Practical Guide to Weatherproofing of Exterior Walls, developed by SWRI. Farahmandpour has managed over 300 projects, many of which have involved multiple disciplines and complex building envelope issues.
Josh Summers is a principal structural engineer at his firm. He is a licensed structural engineer and a licensed professional engineer. During his 19-year career, he has managed over 350 structural repair and façade rehabilitation projects. Summers’ experience
includes investigation of building façades and water leakage issues, structural analysis and design, condition assessments, nondestructive testing, and failure investigation.
Auxiliary Seminar: Vegetative Roofs
for the
Design Professional
Paul Buccellato, RRC, RWC, FASTM, AIA – Henshell & Buccellato Consulting Architects, Shrewsbury, NJ
Ray Wetherholt, FRCI, RRC, RWC, REWC, RBEC, PE – Wetherholt and Associates, Inc., Kirkland, WA
This seminar is an abbreviated version of the one-day course structured for those who design vegetated green roofs or who are responsible for correcting vegetated green roof thermal or moisture protection performance problems. Vegetated green roof design is a
technically demanding and evolving growth industry. This course provides guidance in the areas of design criteria, system selection,
reference standards, and flashing principles and will discuss the influences of Factory Mutual, ASTM, Green Roofs for Healthy Cities
(GRHC), and National Roofing Contractors Association (NRCA) publications and guidelines. The course is focused on the specific aspects of thermal and moisture performance with an introduction to green roof vegetation and soil considerations. It is not intended to
provide in-depth information on plants or growing media.
Paul Buccellato has specialized in moisture-related issues in the building envelope since 1974, including roofing, masonry walls,
waterproofing and condensation. Mr. Buccellato attended Pratt Institute, is a registered architect in four states, and is board-certified
by the National Council of Architectural Registration Boards (NCARB). He is a member of the American Institute of Architects
(AIA), RCI, and a Fellow of ASTM. He is a member of Committee D08 on Roofing & Waterproofing, where he serves as chairman of
Subcommittee D08.20 – Roofing Membrane Systems. He is also a member of C15 on Masonry Units and C24 on Building Seals and
Sealants. He is the mayor of Matawan, NJ. Mr. Buccellato is a member of RCI's RWC Examination Committee, its Education Committee, and chairperson of its REWC Examination Committee. He is a past faculty member and chairman of the Board of Regents of the
Roofing Industry Educational Institute. He served as a member of the NRCA’s Education Technical Committee and was chairman of
its Roofing 301 Course Curriculum Subcommittee.
Ray Wetherholt has expertise in roofing, waterproofing, and building envelope consulting. He started his company in 1984 to assist
owners, architects, contractors, and attorneys in resolving water-intrusion-related issues. Over the years, he has consulted on commercial and institutional buildings, mostly in the Pacific Northwest, including Alaska and Hawaii. Projects have ranged from large
houses with green roofs, to large manufacturing buildings for an aircraft manufacturer, to the Experience Music Project.
12
Educational Programs Saturday, March 7 | 7:45 am - 9:15 am and 9:30 am - 11:00 am
Fenestrations
Karim P. Allana, RRC, RWC, PE – Allana Buick & Bers, Inc., Palo Alto, CA
Vinyl windows are one of the most specified glazing products in residential construction. Over the last 20 years, vinyl windows have transformed this segment of the construction industry. Millions of units are in place. This presenter will discuss performance issues and forensic
analysis of vinyl windows and provide insights for specifying windows to mitigate these performance issues. Participants will gain an understanding of failure modes in vinyl windows resulting from manufacturing, design, and material selection. The speaker will review several case
studies involving glazing failures, frame joint failures, drainage pathway failures, mulled window failures, and structural-related failures.
Karim Allana is the CEO and senior principal of an architectural/engineering (A/E) firm specializing in the building envelope, sustainable construction, and construction management services. Allana has a BS in civil engineering and is a licensed professional engineer in four states. He
has been in the A/E and construction fields for over 30 years. He specializes in forensic analysis and sustainable construction. Allana is a frequent
speaker and presenter at professional forums.
Selection
and
Use
of
Sealants
on the
Exterior Building Envelope
Terence A. DaCosta, EIT – Gale Associates, Inc., Weymouth, MA
Many common vertical wall systems such as panelized façades, fenestrations, and curtain walls rely on sealant to provide a secondary
(and often, primary) weather-resistance barrier for the exterior building envelope. While sealant is frequently used in construction and
restoration projects, the wide range of materials, as well as the various substrate materials and configurations, demand appropriate selection and use of sealants to achieve long-term weatherproofing and service life. This presenter will demonstrate how to select a sealant
based upon a comprehensive and systematic approach.
Terence DaCosta is a project engineer. His responsibilities include performing investigations of existing failures (roofs, walls,
and windows), performing design calculations, drafting contract drawings, providing construction-period monitoring services, and delivering project management services to public and private clients nationwide.
Development of a Standard Test Method to Determine the Wind Resistance of Vegetated Roof Assemblies
A. Baskaran, PEng – National Research Council Canada, Ottawa, ON
Nonpresenting coauthors: Fenella de Souza and Sudhakar Molleti
Understanding how wind affects a vegetated roof assembly (VRA) is a critical design factor. The National Research Council of Canada
(NRC), in collaboration with members of the roofing industry and vegetated system manufacturers, initiated a standard development
study to address this issue. The main objective of this collaboration is to evaluate the wind uplift performance of VRA and to develop a
national standard for possible inclusion into the building codes. This paper will report the progress made on this project.
Dr. “Bas” Baskaran is a group leader at NRC, where he is researching how wind affects the building envelope. He is an adjunct professor at the University of Ottawa, is a member of the Roofing Committee on Weather Issues (RICOWI), RCI, the American Society
of Civil Engineers (ASCE), the Single-Ply Roofing Industry (SPRI), the International Conference on Building Envelope Systems and
Technologies (ICBEST), and the International Council for Building (CIB) technical committees. Baskaran is a research advisor to various task groups of the National Building Code of Canada and is a member of the wind load committee of ASCE. He has authored
and/or coauthored over 200 research papers on wind's effect on buildings. His contributions to roofing have earned him over 25
awards, including the Frank Lander Award from the Canadian Roofing Contractors Association; the Herbert Busching Award from
RCI, Inc.; and the Carl Cash Award from ASTM.
Reroofing Over
a
Wet Concrete Substrate
Edis T. Oliver, PE – Wiss, Janney, Elstner Associates, Inc., Austin, TX
Alonso Caro, Jr., RRC, RRO, CDT – Wiss, Janney, Elstner Associates, Inc., Austin, TX
The speakers will describe the challenges encountered during the reroofing of a university library (Evans Library) that featured a saturated structural concrete deck. The project consisted of a complete tear-off of a sprayed polyurethane roof, the underlying coal tar pitch
built-up roof, and the lightweight insulating concrete (LWIC). Moisture probes were inserted to measure the concrete moisture content
before and after reroofing. Problems solved during construction included mitigation of moisture migration from the old to new roof,
addressing LWIC residue and surface roughness, and attachment of the base sheet/vapor retarder.
13
Edis Oliver has 40 years of experience in the roofing industry. He is a former founder and owner of a roofing contracting firm, past
president of the Roofing Contractors Association of Texas (RCAT), and a recipient of its Curtis Blackwell Memorial Award. Oliver
founded and owned a roof consulting firm, Edis Oliver & Associates, which was acquired by Wiss, Janney, Elstner Associates in
2006. He has designed and consulted on over 1,200 roofing projects.
Alonso Caro Jr. has nine years of experience in the roofing industry. He served on the project's roof condition survey and assessment
team. Caro was the key designer of the roof replacement, and prepared the CAD drawings and specifications. He was the project
coordinator and inspector for the Evans Library, and in that role, performed the moisture testing on the concrete deck, conducted
field observation, and prepared the daily reports and progress meeting minutes.
Quantifying
the
Hydrological Performance
of
Extensive Vegetative Roofs
Matt Perotto – GRIT Lab, Daniels Faculty of Architecture, Landscape and Design; University of Toronto, Toronto, ON
Catherine Yoon – GRIT Lab, Daniels Faculty of Architecture, Landscape and Design; University of Toronto, Toronto, ON
Nonpresenting coauthor: Jenny Hill
The Green Roof Innovation Testing (GRIT) Lab at the University of Toronto is a multi-year research project comparatively analyzing 33
extensive vegetative roof modules with variables of composition and maintenance. Each module is continuously monitored through
an array of nine thermal and hydrological sensors. This presentation will focus on the troubleshooting and calibration processes of two
sensors contributing to the hydrological modeling of the modules. These processes involved analyzing the dielectric permittivity of the
two growing substrate types, as well as designing and fabricating new components of the instruments. The presentation is directed to
professionals concerned with vegetative roof design, construction, maintenance, and monitoring.
Matt Perotto and Catherine Yoon are third-year thesis students in the Master of Landscape Architecture program
at the University of Toronto. They both hold degrees specializing in urban design from the University of Waterloo.
Over the last two summers, Perotto and Yoon have worked as research assistants at the GRIT Lab, where they were
responsible for the collection and organization of data, troubleshooting and calibrating sensors, as well as the maintenance and daily operations of the laboratory.
Waterstreet
at
Celebration Condominiums: A Case Study
of
How
to
Design
James W. Ripley, RRC, RWC, REWC, RBEC, RRO, RA, NCARB – A/R/C Associates, Inc., Orlando, FL
Nonpresenting coauthor: Tyler Hall
for a
Wet Climate
The presenter will discuss the investigation, evaluation, design, and repair of a 12-building community that suffered from extensive water
intrusion problems since its initial construction in 1998. The majority of the problems were created by inappropriate design and material
selection exacerbated by construction scheduling and work method errors. The speaker will address how to investigate and repair a mixeduse building envelope failure, and cover how designing for wet, humid climates is quite different than for many other areas of the country.
James Ripley has practiced architecture since 1976. He has been involved in roof and waterproofing consulting full-time since 1993
in the Orlando, Florida area. Ripley's practice in Florida has offered him a unique opportunity to observe building performance
and deterioration in a high-humidity, high-ultraviolet, high-wind environment. He has observed the long-term performances and
failures of numerous structures, as well as their analysis and repair.
Educational Programs Sunday, March 8 | 2:15 pm - 3:45 pm and 4:00 pm - 5:30 pm
RCI and SMACNA: An Introduction to the Architectural Sheet Metal Flashing Quality Assurance Guide
Russell A. Raymond, RRC, REWC, RWC, RBEC, RRO, CDT, CEI – Morrison Hershfield, Houston, TX
Remo R. Capolino, RRC, PE – Wiss, Janney, Elstner Associates, Inc., Shelton, CT
Peyton Collie, LEED AP – Sheet Metal and Air Conditioning Contractors' National Association (SMACNA), Chantilly, VA
Nonpresenting coauthors: Rebecca Cunningham, RA, LEED AP and Jeffrey C. Garrison, RRC, RWC, PE, CCCA, CEI
Working together, RCI, Inc. and SMACNA have compiled an update to the former SMACNA Architectural Sheet Metal Inspection Guide.
The new joint publication provides written narrative and illustrations regarding the assessment of architectural sheet metal systems
during construction and post-construction evaluations by a property owner, roof consulting professional, or qualified sheet metal contractor. The guide is divided into four parts: introduction, construction basics for architectural sheet metal systems, observation during
construction, and post-construction review and maintenance. Each section will be introduced and discussed.
14
Russell Raymond has nearly 25 years’ experience in roofing, sheet metal, and construction consultation. His experience includes
investigation, evaluation, analysis, renovation design, and construction monitoring/administration of building envelope issues, with
specific expertise in sheet metal and flashing systems. Raymond serves RCI as the Horowitz Award Task Force chairman, participates
on the Emerging Professionals Committee, is RCI’s SMACNA liaison, and is a board member for the Gulf Coast Chapter of RCI.
For his volunteer work with RCI, Inc., Raymond was recognized with the 2014 Michael DeFrancesco Volunteer of the Year Award.
Remo R. Capolino grew up in a family-owned specialty roofing contracting business and graduated from the University of Connecticut with a BS in civil engineering. After more than 15 years in contracting and leadership roles with the Association of General
Contractors (AGC), the Northeast Roofing Contractors Association (NERCA), and the National Roofing Contractors Association
(NRCA), he turned to consulting. Capolino has spent more than 15 years consulting, utilizing his construction and consulting expertise in copper, zinc, slate, and other specialty roofing assemblies on a number of internationally recognized projects.
Peyton Collie is a SMACNA project manager whose primary responsibilities are representing SMACNA before other standarddeveloping organizations, responding to technical inquiries, and updating technical manuals. Manuals he has been involved with
include the Architectural Sheet Metal Manual, HVAC Systems Duct Design, HVAC Systems Retrofit, and IAQ in Occupied Buildings Under
Construction.
Whetherability: How Do Architectural Design Students Consider
the
Elizabeth J. Grant, RA – School of Architecture & Design, Virginia Tech, Blacksburg, VA
Matthew J. Innocenzi, RRC, RWC, REWC, RBEC, PE – WDP & Associates, PC, Manassas, VA
Nonpresenting coauthor: James Jones
Building Envelope?
Employers typically find that recent architectural and engineering graduates have no relevant experience and little, if any, knowledge
of building envelope components or assemblies. This presentation describes a scholarship program initiated by the RCI Mid-Atlantic
Chapter in conjunction with Virginia Tech’s School of Architecture and Design. The scholarship program features a student competition
to develop a project focused on the building envelope and its constructability, sustainability, and code requirements. This presentation
should appeal to employers of architectural and engineering graduates and those interested in promoting the knowledge and understanding of building envelopes to the next generation of design professionals.
Elizabeth Grant is an assistant professor at the School of Architecture and Design at Virginia Tech. She is a registered architect,
and member of RCI. She has been published in Interface, the Journal of Architectural Engineering, and the Journal of Green Building. As
associate director of the Center for High Performance Environments, she has partnered with the RCI Foundation and the RCI MidAtlantic Chapter on multiple initiatives to bring understanding of the building envelope to architecture students.
Matthew Innocenzi is a senior associate and building envelope consultant who specializes in litigation support and expert witness
testimony. Since his 15-year tenure with WDP, he has served as an expert witness in several masonry, stucco, roofing, and waterproofing projects throughout the United States. He currently serves as co-chair for the ASTM task groups of ASTM C926, Standard
Specification for the Application of Portland Cement Plaster and a new ASTM standard currently under development for the evaluation
of stucco bond. As past president of the RCI Mid Atlantic Chapter and current member of the chapter's board of directors, he was
responsible for initiating the program discussed in this presentation.
Product Disclosure: An Emerging Challenge
for the
Building Envelope Consultant
James L. Hoff – Center for Environmental Innovation in Roofing (CEIR), Washington, DC
With the release of the latest version of the Leadership in Energy and Environmental Design (LEED) Green Building Rating System
(LEED v4), product disclosure has become an important topic in sustainable building design. Although disclosure offers an opportunity
to move from guesswork to informed decision-making, it remains a work in progress, raising perhaps as many questions as answers.
In an effort to answer those questions, the presenter will provide a summary of product disclosure research conducted over the past
two years, including the origins of the product disclosure concept, the market forces driving product disclosure, and the latest product
disclosure criteria incorporated in building standards and codes. In particular, the discourse will focus on two of the most talked-about
disclosure tools: The Environmental Product Declaration (EPD) and the Health Product Declaration (HPD). The presentation will be
concluded with a discussion of how these new tools may influence the consulting trade, liability, and what strategies can be used to
integrate these new tools into professional practice.
Dr. Jim Hoff is an experienced executive and consultant in the building materials industry. He currently serves as vice president of
research for the Center for Environmental Innovation in Roofing in Washington, DC and as president of TEGNOS Research, Inc.,
an independent building envelope consultancy. Hoff has published numerous articles on building system performance, quality
management, and life cycle analysis. He is a member of RCI and also serves on the boards of the RCI Foundation and the Cool Roof
Rating Council.
15
Consultant and Contractor Collaboration: Understanding Roles and Responsibilities for Successful
Building Envelope Construction and Rehabilitation Projects
Quinn Ferrall, RRC, RWC, RRO, PE, CDT – Davco Roofing & Sheet Metal, Inc., Charlotte, NC
Christopher Giffin, RRC, AIA – Wiss, Janney, Elstner Associates, Inc., Duluth, GA
The roles and responsibilities of the consultant and contractor in the project life cycle are separate and unique, but not entirely unrelated. The speaker will review these roles and provide construction document guidelines for establishing expected performance to
ensure successful completion of building envelope (BE) projects. BE restoration projects require analysis of the existing systems (which
often includes destructive testing) and involvement of the contractor in the design development phase. The presentation will feature an
introduction to standard testing procedures and provide additional guidelines for implementation of contractor services in the design
development phase to ensure successful performance through construction.
Quinn Ferrall is a consultant with over 14 years’ experience in design and construction of roofing and waterproofing systems. He has
been a commercial roofing contractor for over six years. Ferrall is a licensed professional engineer in North and South Carolina, and
a 2001 graduate of The Citadel. He holds a BS in civil and environmental engineering and received his MBA in 2006.
Christopher Giffin is an associate principal with his firm, based in Atlanta, Georgia. He specializes in the diagnosis and repair of
building envelope problems. With over 20 years of experience, he has been involved with many roofing- and waterproofing-related
projects of both historic and contemporary structures. Notable projects include the Candler Building, The Grove Park Inn Resort and
Spa, Fort Benning Barracks, U.S. Cellular Field, LSU Tiger Stadium, and Fenway Park.
Innovative Repairs
to
Terra Cotta Parapets
and
Cornices
Steven P. Bentz, RRC, RWC, REWC, RBEC, PE – Facility Engineering Associates, PC, Fairfax, VA
Michael G. Payne, EIT – Facility Engineering Associates, PC, Fairfax, VA
Many historic buildings require specialized thinking to assess issues such as thermal expansion and contraction, especially when irreversible moisture expansion has had decades or centuries to affect the building. Proper repairs need to address problems with minimal
change to historic components. Understanding of historic construction helps when making a strategic assessment. The speaker will
discuss a successful restoration project that included innovative approaches to terra cotta and stone water table stabilization, including
a unique use of Nelson stud welding technology. Selective rebuild of the parapet, resetting of coping stones, addition of through-wall
flashings, and recoating of terra cotta completed the restoration and created a long-lasting repair for a project budget that was approximately $30 million less than the original estimates. Key points covered will include irreversible moisture expansion, thermal expansion
and contraction, rust-jacking, and terra cotta glaze failure remediation.
Steve Bentz has been involved in hundreds of projects. His services have included in-field investigation, testing and evaluation;
preparation of construction documents; bidding; construction administration of roof replacement; and façade repair. He is currently
a senior engineer specializing in building envelope repair and assessment at the Fairfax, VA, office of his firm. Bentz is an associate
member of SWRI and is secretary of the RCI Mid Atlantic Chapter.
Michael Payne is a project engineer with his firm. His professional roles include field assessment and reporting, design of repairs,
and contract administration during construction. Payne has assisted in consulting for building owners and property managers on
implementing repair and maintenance plans for building components. He has growing experience with evaluation and repairs of
concrete, masonry, steel, and wood structures; building enclosure and roofing systems; parking garages and pavements; waterproofing; historic rehabilitation; and various other building systems.
The Great Debate: Nonreflective
vs.
Reflective Roofing Membranes
Robert Anderson, CSI – Firestone Building Products, Indianapolis, IN
The prevalence of reflective roofing membranes has increased in recent years. From an environmental standpoint, the trend toward reflective roofing membranes can be attributed to the material’s role in reducing a building’s energy usage, Global Warming Potential (GWP),
and the Urban Heat Island (UHI) effect. Recent research shows that the color of a roofing membrane can also affect rooftop condensation
and longevity. Some studies even indicate a “heating penalty” for using reflective roofs in certain climates, possibly negating the energy
savings achieved from the cool roof. The presenter will review the impact of color and reflectivity on buildings and the environment.
Robert Anderson is a building envelope solutions manager for Firestone Building Products. He is responsible for promoting the
benefits of metal wall claddings, cavity wall technologies, and premium roofing systems to the architectural community. Anderson
has a BS in finance from Northern Illinois University. He is a member the Construction Specifications Institute (CSI) and the Building
Enclosure Council (BEC).
16
Educational Programs
Monday, March 9 | 8:45 am to 10:15 am and 10:30 am to 12:00 pm
Understanding Low-Sloped (Hydrostatic) Standing-Seam Metal Roofs
Stephen L. Patterson, RRC, PE – Roof Technical Services, Inc., Fort Worth, TX
Charles L. Smith, Jr. – McElroy Metal, Inc./Architectural Building Components, Houston, TX
The presenters will discuss performance issues associated with low-slope (hydrostatic) standing-seam metal roofs (SSMRs) and the industry standards related to these roofs. They will provide examples and insights into the failures of such roofs and clarify the standards
affecting them. SSMRs are increasingly being used in applications once reserved for built-up and single-ply roofing; and many of these
roofs are blowing off, leaking, and failing prematurely. The objectives of this presentation will be to explain the differences between hydrostatic and hydrokinetic SSMRs, the performance requirements of hydrostatic SSMRs, and the mechanisms of failures of hydrostatic
SSMRs. The presenters will also provide understanding of the industry standards and their nuances for hydrostatic and hydrokinetic
SSMRs, as well as offer guidelines for specifying and constructing hydrostatic SSMRs that perform. This presentation brings together
the unique collaboration of a consultant/engineer and a manufacturer who collectively have designed countless SSMRs and investigated
hundreds of hydrostatic SSMR failures. The collaboration melds manufacturing, field performance, testing, and design experiences to
address the serious performance issues and design challenges associated with hydrostatic SSMRs.
Stephen Patterson is a building envelope consultant with 40 years of experience in the roofing industry, including work in manufacturing, contracting, and as a roof consultant. He coauthored Roof Design and Practice, a textbook published by Prentice Hall in 2001;
and two design monographs, Roof Drainage and Wind Pressures on Low-Sloped Roofs published by the RCI Foundation. Patterson has
consulted and designed complex, low-sloped metal roofs in the Southwest, including the American Airlines Wide-Body Hanger at
Alliance Airport and Terminal D at Dallas Forth Worth Airport.
Charlie Smith founded Architectural Building Components in 1989. In 2012, Architectural Building Components became a part of McElroy
Metal, which enabled Charlie to focus on educational and product development efforts to help the roofing industry design creative solutions with metal. He recently cowrote the new RCI Metal Roofing Course with Brian Gardiner. He is a member of the NRCA and RCI.
Wind Load Design Specs
and
Air Barrier Performance Levels
Benjamin Meyer, RA, LEED AP – DuPont Building Innovations, Richmond, VA
The presenters will outline characteristics important for air barrier assembly performance by addressing wind load design specs by project
type, methodology of using ASTM 1677 vs. ASTM 2357 as assembly tests, and how assembly airtightness impacts emerging energy code compliance. The presentation will include examples of how installation details can impact the performance level for different air barrier systems.
Benjamin Meyer is a building science architect with the DuPont™ Building Knowledge Center, where he works with customers and
industry associations regarding commercial building envelope design. He participates extensively in standard and code development. Meyer is on the board of directors of the Air Barrier Association of America (ABAA), and is a member of the Materials and
Resources Technical Advisory Group of LEED. He is also involved as an ASHRAE 90.1 Envelope Subcommittee consultant.
Glazing Failures
and
Ways
to
Prevent Them
Brian Hubbs, PEng - RDH Building Engineering, Ltd., Vancouver, BC
Over the past few decades, the use of glass and glazing on high-rise buildings has increased dramatically. More recently, as a result
of increased industry recognition of the importance of energy efficiency, the trend is moving towards more energy-efficient glazing
systems. However, there are instances of implementation of new technology which have resulted in premature and costly failures. Several case studies will be used to show and explain the variety of problems that can occur with glass and glazing after installation. The
speaker will offer risk-reduction recommendations to help designers avoid the most common causes of failures.
Brian Hubbs has over 20 years’ experience as a consultant practicing exclusively in the field of building science. Recognized by his
peers as being a practical building science engineer and researcher who consistently delivers innovative solutions, Hubbs has a
unique blend of theoretical and hands-on knowledge gained from completing hundreds of building enclosure investigations and
rehabilitation projects, and from design consulting and construction review of building enclosures for new buildings.
17
Strategies
for
Energy-Efficient
and
Fire-Resistant Building Enclosure Details
Eric K. Olson, PE – Simpson Gumpertz & Heger, Inc., Waltham, MA
Andrew E. Jeffrey, PE, LEED AP – Simpson Gumpertz & Heger, Inc., Waltham, MA
Nonpresenting coauthor: Brian D. Kuhn, PE
Energy conservation codes and sustainable building practices often require building enclosures to have continuous insulation for increased energy efficiency. Recent code updates include more stringent fire-resistant requirements for many popular exterior wall products. The presenters will review requirements for continuous insulation, placement of vapor retarders and air barriers, and the effects
of thermal bridges. The speakers will identify common paths of thermal loss through building enclosures and discuss mitigation of
condensation-susceptible details, methods to improve enclosure details by use of thermal models, and strategies to achieve compliance
with new fire-related building code requirements for building enclosures.
Eric Olson specializes in the evaluation and investigation of building enclosure systems, including windows, curtain walls, masonry,
exterior insulation finish system (EIFS), stucco veneer, roofing, and plaza and below-grade waterproofing. He is experienced with rehabilitation design for these systems and in design consulting related to new building construction and existing building rehabilitation.
Andrew E. Jeffrey's practice is focused on investigating and diagnosing the causes and consequences of building envelope problems,
including façades, windows, curtain walls, roofing, and waterproofing. His experience includes evaluation of building enclosure
systems and preparation of construction documents. Jeffrey is a member of the American Society of Civil Engineers.
Innovative Waterproofing Solutions for Blind-Side Applications Using Prefabricated
Modified-Bituminous Sheet Membranes
Jean-François Côté – Soprema Canada, Inc., Drummondville, QC
Hank Staresina – Soprema Canada, Inc., Woodbridge, ON
Nonpresenting coauthor: Rémi Saucier
Blindside waterproofing provides challenges that can be addressed using prefabricated polymer-modified bitumen sheet membranes.
The benefits of a fully adhered system, such as preventing lateral water migration on the interior side of the membrane, will be presented, as will ways to take advantage of the concrete curing process for an intimate bond between the concrete and membrane. Blindside
waterproofing systems based on modified-bituminous sheets and accessories meet the designers’ expectations for soil conditions and
contaminants, and gas permeability of membranes, while providing contractors with the ease of installation and detailing. They allow
a cost-effective solution while accomplishing watertight structures.
Jean-François Côté is a research chemist and his company’s director of strategic development. He coordinates the product and systems development. Côté is cochair of the ASTM D08.04 Subcommittee on Felts, Fabrics, and Bituminous Sheet Materials, and is an
active member of technical committees in several organizations, including ARMA, SPRI, the Canadian Standards Association (CSA),
and United Laboratories of Canada (ULC).
Hank Staresina is a technical specialist for building envelope solutions. He has been a part of the Canadian construction industry
since 1980. Staresina has worked with a number of large manufacturers. This has provided him with a vast knowledge of industry
practices. He serves on the board of directors of the Building and Concrete Restoration Association and is past president of the Sealant Waterproofing Association of Ontario.
The Environmental Impact
of
Roofing Systems: Ten Life-Cycle Indicators
Jonathan Dickson, PEng, BSSO, LEED GA – Read Jones Christoffersen, Ltd., Toronto, ON
Nonpresenting coauthors: Duncan Rowe, PEng, LEED AP BD+C; Russell Richman, Peng; and Matthew Bowick, LEED AP
The environmental implications of roofing system selection vary by building location, building archetype, insulation levels, and roof
membrane selection. Life-cycle assessments of 432 combinations of these variables have been completed, each tracking ten negative environmental indicators; and results have been formulated into a database for use by stakeholders during roofing system selection within
major Canadian urban centers. The methodology used during this study, as well as key findings, will be presented by the speaker.
Jonathan Dickson is a LEED® Green Associate (GA), a member of the Ontario Society of Professional Engineers (OSPE) and a Building Science Specialist of Ontario (BSSO). He works for a Canadian engineering consulting firm that specializes in structural engineering, building science, and restoration. Within the past four years, Dickson has been involved with dozens of roof investigation and
replacement projects for both new and existing construction within Ontario.
18
Educational Programs Weather-Related Effects
on the
Monday, March 9 | 2:15 pm - 3:45 pm and 4:00 pm - 5:30 pm
Installation
Todd Nathan, RRC, RRO – Johns Manville, Denver, CO
Zebonie Sukle – Johns Manville, Littleton, CO
of
Fully Adhered Single-Ply Systems
The speakers will offer a presentation on the relationship between temperature and dew point differentials and the impact they may
have on the performance of adhesives. Two case studies will be evaluated, along with supporting lab data, to highlight the importance
of understanding environmental conditions and the role they play in proper adhesive drying. Due to environmental concerns and code
restrictions with solvent-based single-ply adhesives, the use of water-based (WB) and low-VOC solvent-based (LVOC) adhesives is
becoming more popular in the low-slope roofing market. At the same time, the roofing industry has become concerned with the longer
drying times exhibited by WB and LVOC products, because both react differently to environmental conditions than solvent-based adhesives. This is especially true during changes in ambient temperatures and dew points on the roof. While there is a general industry
consensus that most of these issues revolve around WB adhesive drying rates, it has been found that similar problems may also apply
to LVOC adhesive products. These concerns have taken the form of blistering and/or inadequate adhesion of the single-ply membrane
to the substrate when using WB and LVOC adhesives in certain environmental conditions.
Todd Nathan is the senior manager of technical services for JM Roofing Systems (JM). He is responsible for the company’s guarantee
service and field technical functions. Nathan was formerly the contractor channel manager for JM. Prior to spending time as the
contractor channel manager, he spent several years in various technical positions. He worked for a roofing contractor for eight years
prior to joining his current company.
Zebonie (Zeb) Sukle is the single-ply engineering manager for her company. She manages the team responsible for TPO, PVC, and
EPDM membranes, accessories, and fasteners. Sukle represents JM on the SPRI board and is actively involved in the roofing industry. She has been recognized for her contributions to product improvements, development, engineering excellence, and innovations.
The Problems With
and
Solutions
for
Ventilated Attics
Graham Finch, PEng – RDH Building Engineering, Ltd., Vancouver, BC
Nonpresenting coauthors: Marcus Dell, PEng; Robert Lepage, PEng; Lorne Ricketts, EIT; and James Higgins
There has been an upward trend in moisture problems within sloped wood-frame roofs, particularly in the Pacific Northwest. The
problems consist of mold and fungal contamination within the attics of many newer single- and multi-unit complexes. Investigations
and testing of these attics has found that the usual problem of air leakage from indoors and ducts is only one of the common culprits.
Instead, wetting from external sources—moisture in the outdoor ventilation air, night sky condensation, and, in some cases, water seepage through asphalt shingle roofs—are contributing factors. In some climatic zones, more ventilation can make matters worse.
Graham Finch is a principal and building science research specialist with his firm. He has a passion for technology and for making
better and more energy-efficient buildings. He leads RDH’s building science research group and is actively involved in a wide range
of projects, from building research studies to forensic investigations, building monitoring, hygrothermal modeling, and new construction across North America. Finch has authored several publications and practical industry guideline documents related to durable and
energy-efficient building enclosures and roofs. He is a part-time instructor at the British Columbia Institute of Technology.
Not All Glass-Mat Sheathings Are Created Equal
David L. Bowen, LEED GA – Carlisle Coatings & Waterproofing, Wylie, TX
Steve Velten – Carlisle Coatings & Waterproofing, Wylie, TX
Glass-mat gypsum sheathing has been the exterior sheathing of choice in commercial construction for more than two decades. Over the
last few years, many sheathing manufacturers have introduced new glass-mat sheathings into the market. Differences have been noted
in the performance of sheet- and liquid-applied air/vapor barriers installed over these glass-mat sheathings. The presenter will detail
specific characteristics of glass-mat sheathings from six manufacturers. Sheathing field and laboratory investigations will be discussed,
as well as their differences and how they impact the construction community.
David Bowen provides strategic direction, project, and product management services. He has more than 20 years of experience in the
construction manufacturing industry, with a focus on the air/vapor barrier, waterproofing, and EIFS markets. Bowen holds a BS in
business administration from the University of Utah and an MA in organizational leadership from Gonzaga University.
19
Steve Velten is a senior chemist with more than 30 years’ experience in the adhesive products industry. Velten has developed blindside waterproofing adhesives and heat-curable epoxy systems, and has set up reactor systems for single-component liquid and
solid-urethane adhesives. He has extensive technical knowledge of the adhesives and waterproofing industries, operations, MRP
implementation and product health.
Stucco Detailing
for
Buildings With Unique Geometry
Richard Mosco, AIA – Wiss, Janney, Elstner Associates, Inc., Pasadena, CA
Lee Cope, PE – Wiss, Janney, Elstner Associates, Inc., Duluth, GA
Portland cement plaster (stucco) supported by metal lath relies on a properly installed weather-resistive barrier and drainage plane,
and properly installed through-wall flashings to manage water and prevent moisture intrusion from occurring into the wall assembly
and the building interior. Unusual geometric features in building façades present unique challenges that often affect the performance
of the building enclosure. These problematic features may include sloping walls, as well as diagonally set fenestration, wall accessories,
horizontal soffits, shelf conditions, and other projections. The information presented will assist designers and builders in avoiding the
potential for water intrusion in buildings due to inappropriate detailing.
Richard Mosco specializes in the evaluation and repair of exterior building enclosure components and assemblies. He has extensive
experience in the investigation and repair of water leakage and distress in Portland cement plaster (stucco) cladding systems, as well
as many other building enclosure systems, including roofing, waterproofing systems, fenestration systems, air and moisture barriers, and other building envelope components.
Lee Cope has extensive experience in detailing and proper installation of Portland cement plaster (stucco) façade systems, air barriers, window systems, waterproofing, and the interfaces of various envelope components. He has evaluated a variety of structures
relating to the cause and/or distress of a building’s exterior envelope systems. Cope is a voting member of ASTM Committee C11 on
Gypsum and Related Building Materials and Systems.
Coming January 2015 to Your Smart Phone or Tablet
RCI International Convention and Trade Show
Mobile App
20
Spouse/Guest Programs
Spouse/Guest Lounge
For the convenience of registered spouse/guest attendees, a comfortable lounge area will be available for meeting with friends and relaxing.
See the schedule of events for lounge hours.
Spouse/Guest Luncheon
at
The Guenther House (with Tour)
Friday, March 6 — 12:30 PM - 3:30 PM | Shuttle Departs — 12:15 PM
Tour participants will depart the Grand Hyatt traveling to South Town, San Antonio to infamous King Williams Historic District and The Guenther House. Carl Hilmar Guenther,
the founder of Pioneer Flour Mills, built this elegant home in 1859. It has been restored by
the company and welcomes visitors as a museum, restaurant, and retail store. The house is
located on a bend of the San Antonio River, at the foot of King Williams, one of the oldest
historical districts in Texas.
Guests will enjoy a luncheon in The Roof Garden, which includes the entire upper floor of
The Guenther House, a spacious and airy former ballroom with an adjoining open terrace
overlooking the San Antonio River. The Roof Garden features a charming brick fireplace,
fountain, well, porcelain tile floors, ceiling lanterns and wall sconces.
After lunch, guests will enjoy the locale's special beauty and graciousness while exploring the grounds and rooms of The Guenther
House. The Guenther family's Pioneer Flour Mill still operates today, producing Pioneer Flour, White Wing Flour and many baked
goods. There is a gift shop full of cooking items and secret recipes to thrill any cook.
Guests will then take a stroll along the famous tree-lined King Williams Street. The street's grand homes were built at the turn of the
century and represent the splendor of the new economy in the West. A tour guide will share stories of the famous people who have
lived and worked in San Antonio.
Spouse/Guest Outing — San Antonio Botanical Gardens
Saturday, March 7 — 10:00 AM - 12:30 PM
| Shuttle Departs — 9:45 AM
Attendees will travel a short distance by shuttle to the beautiful 33-acre San Antonio
Botanical Gardens and the Lucile Halsell Conservatory. Guests will find Hill Country wild flowers, formal rose gardens, and a biblical garden that features flowers
and plants from the Bible. There is a children’s garden, a garden for the blind, and
a traditional Japanese garden donated by San Antonio’s sister city, Kumamoto. Everyone will enjoy the garden's 90,000-square-foot, climate-controlled, soaring glass
structure loaded with replicated displays of rain forest, desert and tropical climates.
Spouse/Guest Outing — A Day
Monday, March 9 — 10:00 AM - 3:00 PM
in the
Gruene Historic District
| Shuttle Departs — 9:45 AM
Visitors to the uniquely named 19th-Century town of Gruene (pronounced
“green” like the color, and also the German word for green) will find many restored buildings. Gruene features an array of antique and craft shops with oneof-a-kind handcrafted furniture, dress shops, pottery shops, and a silversmith.
There is also an “old-time” Texas drug store. This is a quaint, rustic town, full
of shopping and many site-seeing opportunities. One of its hallmarks is the Old
Grist Mill, located next door to Gruene Hall.
Gruene Hall is over 100 years old, and is thought to be the oldest continually operating dancehall in Texas. Both George Strait and Lyle Lovett started their careers
here. This was also the location for the dancehall scene in John Travolta’s movie,
Michael. With its huge tin roof, open rafters and fold-down shutters, Gruene Hall
proudly claims to have maintained its unique structure with no changes since it was built in 1878.
There are many lunch options in this interesting town, including the Old Grist Mill (with beautiful grounds and dining in the trees),
as well as Abode Verde, Cantina del Rio, Gruene Coffee Shop, Mozie’s, and more. And don't miss the Wine Tasting House with great
Texas wines for tasting and purchase.
21
International Trade Show
Henry B. Gonzalez Convention Center
1st Level, Exhibit Hall B
Trade Show Exhibition, Grand Opening,
Saturday, March 7— 3:15 PM to 7:15 PM
Trade Show Exhibition
With Full Breakfast Buffet
and
Sunday, March 8 — 8:45 AM to 12:00 PM
and
Reception
Cash Prize Give-Aways
Discover the latest products and services on display by exhibitors and sponsors. Live product demonstrations will occur each day. There will be a complimentary reception on Saturday. Sunday's trade show session will feature a full
breakfast buffet and cash prizes for lucky attendees.
Earn CEHs for Attending
Trade Show
the
RCI
Attendees will earn 2.0 CEHs for spending up
to four hours on the trade show floor. Attendees
who spend more than four hours at the trade
show will receive 3.0 CEHs.
Be There Sunday Morning
Trade Show Cash Prizes
for
Attendees who place a completed ticket in the
prize drum at the trade show will be eligible for
cash prize drawings. You must be present to win,
and you may win multiple times.
Exhibit Hall Map
22
Document Competition Be sure to visit the display of the RCI Document Competition entries and winners during the trade show. Winners will be recognized at the Awards Luncheon. Competition categories include small projects,
large projects, and reports.
Trade Show Exhibits From These Leading North American and International Vendors
2001 Company
3M
Air Barrier Association of America, Inc.
American Hydrotech, Inc.
APOC, Division of Gardner-Gibson
ATAS International, Inc.
Atlas Roofing Corp.
Barrett Company
BASF Corp.
Bayer MaterialScience, LLC
Burke Industries
Carlisle Construction Materials
CertainTeed Corp.
Chem Link, Inc.
CoreLogic
Cosella-Dörken Products, Inc.
D-Mark, Inc.
DaVinci Roofscapes
DERBIGUM Americas, Inc.
Dow Building Solutions
Durapax, LLC
Duro-Last Roofing, Inc.
Eagle Roofing Products
Elastizell Corp of America
Emseal Joint Systems, Ltd.
Epilay, Inc.
ERSystems & Elastek
FBC Chemical Corporation
Fibertite Roofing Systems by Seaman Corp.
Firestone Building Products
Flex Membrane International
GAF Materials Corp.
GenFlex Roofing Systems
Georgia-Pacific Gypsum, LLC
Gerard USA
Grace Construction Products
Hanover Architectural Products
Hartsfield & Nash Agency, Inc.
Henry Co.
Hunter Panels
IB Roof Systems, Inc.
Impac Group
IR Analyzers / Vector Mapping
Johns Manville
JR Jones Roofing
Karnak Corp.
Kemper System America, Inc.
Loadmaster Systems, Inc.
Malarkey Roofing Products
MAPA Products
McElroy Metal, Inc.
Menzies Metal Products
Metal-Era, Inc.
Momentive Performance Materials, Inc.
National Coatings Corporation
National Gypsum Company
National Roof Deck Contractors Association
National Roofing Partners
Nations Roof, LLC
NEOGARD
Norman-Spencer
OMG Roofing Products
Owens Corning
Peach State Roofing, Inc.
Polyguard Products, Inc.
Premier Rail Systems
Premium Spray Products
Propeller Head Software
PROSOCO, Inc.
Quest Construction Products
Revere Copper Products, Inc.
Roof Hugger, Inc.
Roof Monitor
Roof Penetration Housings, LLC
RoofLogic
Rooftop Anchor, Inc.
Roxul, Inc.
Royal Adhesives & Sealants, Inc.
SafePro LP
Safety Rail Source
Saratoga Roofing and Construction
ShieldWorks Industrial Containment Solutions
Sika Corporation
Siplast
Situra, Inc.
SOPREMA
Sto Corp.
STS Coatings
T Clear Corp.
TAMKO Building Products
Thaler Metal Industries, Ltd.
Tramex, Ltd.
Tremco, Inc.
Tropical Roofing Products
TRUFAST, LLC
Uniflex Fluid Applied Roof Systems
Urbanscape
US Ply, Inc.
USG Roofing Solutions
Versico, Inc.
VP Buildings
W. R. Meadows, Inc. | Blue Ridge Fiberboard, Inc.
Wasco Products, Inc.
Wausau Tile, Inc.
Western Colloid SC, Inc.
Xtraflex By Polyglass
23
From the Six Flags Fiesta theme park to bronco-busting rodeos, San Antonio offers plenty of
spicy family-style fun.
With more than 1.3 million inhabitants, San Antonio is the nation’s seventh most populous
city. Shop in Mexican markets, sample the Tex-Mex cuisine, and wander along plazas inspired
by Spanish Colonial architecture.
Strolling the San Antonio River Walk guides you along famous places that represent more than
300 years of history. The Alamo, built in the early 1700s, is the most famous of all attractions.
This was the scene of a heroic battle during the Texas Revolution. Explore the Institute of Texan
Cultures, where you'll see and hear how the mix of cultures influenced the area.
Find beautifully preserved buildings in the San Antonio Missions National Historical Park and
learn about life for Native Americans during Spanish colonization. Visit one of the city’s top
museums and gaze at huge dinosaur bones, Egyptian mummies, or Chinese relics dating back
to 1600 B.C.
For a peaceful escape within the city limits, head to the San Antonio Botanical Gardens or the
nearby Japanese Tea Gardens. You can see endangered prairie animals from the local area at
the nearby San Antonio Zoo and Aquarium.
San Antonio is an exciting city to visit any time of year. A warm, semi-arid climate means
it’s hot in summer and mild in winter, and most attractions are open year-round. Go to
visitsanantonio.com for more great tourism ideas. (Text courtesy of www.expedia.com.)
RCI, Inc. | 800.828.1902 |
24
rci-online.org