1. No category

MMYPEM
www.mmypem.com
Montajes Mecánicos y
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
INDEX
CORPORATE INFORMATION
CORPORATE SOCIAL RESPONSIBILITY
ÁREAS DE ACTIVIDAD
START UP
COMBINED CYCLES
BIODIESEL
BIOMASS
DIESEL ENGINES
DESULPHURISATIONS
REGASIFICATION PLANTS
SOLAR THERMAL POWER PLANTS
HYDRAULIC
MAINTENANCE AND OVERHAULS
TURBINES
DIESEL ENGINES
MAINTENANCE
INDUSTRIAL ASSEMBLIES
SALTS FUSION
SUPERVISION
CLIENTS
QUALITY CERTIFICATE
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
HISTORY
MONTAJES MECÁNICOS Y PUESTA EN MARCHA J.R. S.L.U., was established on 5 January 1999 in A
Coruña and began its activity in February of the same year.
MMYPEM J.R. S.L.U. is a company set up by professional partners with wide, extensive and proven
experience in the field of industrial and precision machining, industrial assembly, fluid piping
systems, supervision of assembly and start-up of industrial installations, especially in the field of
energy.
As a result of their professional activities before establishing the company, the founders perceived
that there existed serious potential in the Spanish market to develop their own project, employing
the high level of specialisation attained from their previous professional experience.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
PERSONNEL
Management
Pablo Riveira Bañobre
RRHH
Jose Ramón Riveira Bañobre
Admon. Depart
Fiscal Depart
Labor Depart
Clients
Suppliers
Technical Depart
Jesús Pazos Cardoso
Safety Depart
IRS
Prevention
Mechanical
Chemical
Electrical
Control room
operators
Vigilance
Health
Quality
Team Chief
Welder
Assembler
Mechanical-Adjuster
Tuber
Assistant
MMYPEM
Mechanical
coord.
Mechanical
DEVELOPMENT
We would stress the high level of professionalism and experience of our personnel, as it is the basis
on which our company is founded, together with the excellent relationship we have with our clients,
whose confidence is won year after year through our efficient working practices and guarantee of
work done well.
From its creation in 1999 until 2002, MMYPEM J.R. S.L.U. remained at the introduction into the
market stage, where it became established and found its place among competitors, managing to
attract prestigious clients and as a result, seeing the possibility to increase its volume of work.
During the year 2003, it gained a higher market share and took on more staff. The highest rate of
growth was from 2004 onwards.
The year 2014 passed with an average of 101 workers, and it is estimated that it will further increase
this figure, because MMYPEM J.R. S.L.U. continues its expansion phase taking guaranteed workload
for the next few years by all the national and international geography.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
PERSONNEL
We must also indicate that there is an external market outside of our borders that demand our
services. We have begun to exploit yet, experiencing a gradual growth, prevail aspects such as
safety in the work and the professionalism of the staff, which are achieved after a good training from
that begins to work with us for the first time.
In conclusion, the future seems to be very favourable for a company like ours (barriers for similar
companies to enter the market are high given the difficulties to find qualified and experienced staff
and the high cost of machinery and equipment).
Finally, we would like to emphasize that we are certain that the favourable reception we have
achieved is due to our capacity to successfully meet new challenges, and to the company's
self-imposed commitment and guarantee to meet the objectives that our clients demand for their
projects.
Work average
1999-2015
150
MMYPEM
125
100
75
50
25
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
EQUIPMENT AND MACHINERY
In order to provide mechanical support, the company possesses containers which are totally equipped with the appropriate manual tools to carry out the activities of a start-up in all the different
forms of energy production.
Each containers consists of:
Dynamometric wrenches.
Shackles.
Electric and pneumatic grinders.
Sledgehammers.
Electric and pneumatic drills.
Tap sets.
Measuring apparatus (vibrations, temperature,
RPM).
Screwpitch gauge set.
Electric transformers (220v/24) with various
outputs.
Stillson wrenches.
Vacuum cleaners.
Files.
Hydraulic jacks.
Slings.
Spotlights.
Digital exterior micrometers.
Welding machines.
Interior micrometers.
Spot welding.
Socket drive sets.
Electric and manual tapping machines.
Step ladders.
Oil pumps.
Pipecutters.
Hose pipes.
Air compressors.
Eye bolts.
Electric switchboards.
High pressure water pumps.
Magnetic bases with dial indicators.
Argon welding machine.
Pull lifts.
Impact wrenches.
Transmitters.
Oxygen cutting equipment.
CORPORATE
SOCIAL
RESPONSIBILITY
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
QUALITY
Our main objetive is to increase competitiveness and quality of the projects.
We work every day looking for continuous improvement in process management and activities. Our
principles are:
- The whole satisfaction of our clients. MMYPEM analize and develope each project in a personalized
way, applying the services that are necessary in order to reach the goals.
- We have a staff with large experience and we give them continuous training in order to obtain the
best results.
- We make a great effort to achieve a continuos growing.
MMPYEM works with the most demanding quality standards, showed in the 9001 Quality Certifcate,
made by Bureau Veritas.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
ENVIRONMENT
In MMPYEM the environmental area is the base of sustainability where a perfect management and
social responsability are necessary.
We know that our responsabilies go further the legal obligation so we cannot be out of the society
problems.
The Direction Comittee, the highest managmente element, takes the business decissions trying to
prevent the area where we do our activity.
MMPYEM works with the most demanding environmental standards, showed in the 9001 Quality
Certifcate, made by Bureau Veritas.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
SECURITY
Looking after the security of our employees is one of the basic objetives that we have, and for all the
working group, too. MMYPEM works everyday in order to reduce the laboral accidents. The good work
in this way can clearly be seen in our stadistics, where the accident ratio is very lower.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
TRAINNING
The MMYPEM staff have a large laboral experience inside the sector. Anyway, MMYPEM always want
to improve their proffesional capabilities proposing to the staff continuous training courses.
We make an effort renewing and updating the capabilities and habilities of each worker, making an
adaptation to the new times and tecnologies so we can offer the best services to our clients.
COMMISSIONING
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
COMBINED CYCLES
- We give services for the preparation of chemical cleaning, works that consist of dismantling control
valves (internal) and preparing temporary connections (by-passes, blind flanges, etc.) for systems
washing and air and steam blow downs.
- Systems reinstatement.
- Preparation for flushing (demineralised water, cooling water, oil, gas, gas oil, steam seals)
- Systems line up for both testing and for starting machines in the commissioning.
- Pre-commissioning checks and pump alignment.
- Inspection and repair of motorised control valves, pumps, etc.
- Exhaustive monitoring of systems according to P&Ds.
- Inspection of first ignition turbine bearings and inspection of combustion chambers.
WORKS MADE
Commissioning of CCPP de Parnaiba (Brasil)
Contractor: UTE PARNAIBA GERAÇAO DE ENERGIA, S.A.
Client: INITEC ENERGÍA, S.A.
Commissioning of C.T.C.C. Granadilla (Tenerife).
Contractor: Técnica Reunidas S.A.
Client: Endesa S.A.
Commissioning of C.C. San Reus (Mallorca).
Contractor: Endesa Generación
Client: Gesa
Commissioning of C.T.C.C. Castelnou (Teruel)
Contractor: Initec-Mitsubishi
Client: Electrabel
Commissioning of C.C. San Reus II (Mallorca).
Contractor: Duro Felguera.
Client: Gesa.
Commissionig of C.T.C.C. Aceca (Toledo)
Contractor: Ute Cobra-Sener
Client: Gas Natural -Unión Fenosa.
Commissioning of C.T.C.C. San Roque (Cádiz).
Contractor: Duro Felguera.
Client: Endesa Generación.
C.T.C.C. Cristóbal Colón (Huelva)
Contractor: Initec- Mitsubishi
Client: Endesa Generación
Commissioning of C.T.C.C. Iqua (Tarragona).
Contractor: Técnicas Reunidas.
Client: Endesa Generación.
C.T.C.C. Aes Cartagena (Murcia)
Contractor: Initec-Mitsubishi
Client: Gas Natural
Commissioning of C.T.C.C. Santurzi (Vizcaya).
Contractor: Ute Santurzi
Client: Iberdrola.
C.T.C.C.Plana del Vent (Tarragona)
Contractor: Técnicas Reunidas S.A.
Client: UTE Plana del Vent
Commissioning of C.T.C.C. Arrubal (Logroño)
Contractor: Siemens S.A.
Client: Gas Natural
Commissioning of C.T.C.C. As Pontes (A Coruña)
Contractor: OPEMASA
Client: Endesa, S.A.
Commissioning of Campo de Gibraltar (Cádiz)
Contractor: Siemens S.A.
Client: N.G.S.
P.E.M. en la C.C.C. Sabón (A Coruña)
Contractor: Cobra Plantas Industriales
Client: Gas Natural - Unión Fenosa
Commissioning of C.T.C.C. Palos de la Frontera
Contractor: Siemens S.A.
Client: Gas Natural - Unión Fenosa
Commissioning of C.C. Riga (Letonia)
Contractor: Iberinco
Client: Iberdrola
Commissionig of C.T.C.C. Boroa (Vizcaya).
Contractor: Ute Boroa
Client: Vizcaya Energía ESBI
Commissioning of C.C. Escatrón (Zaragoza)
Contractor: Técnicas Reunidas
Client: Global 3
Combined cycles
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
WORKS MADE
Commissioning of C.T.C.C. Port de Barcelona
Contractor: Técnicas Reunidas
Client: Gas Natural
Commissioning of CTCC Great Island Co Wexford
(Irlanda)
Client: DRAGADOS COBRA INITEC JV
Commissioning of C.T.C.C. Besós V (Barcelona)
Contractor: Técnicas Reunidas
Client: Endesa
Commissioning of CTCC REKA (PERÚ)
Client: Cobra Perú
C.T.C.C Parnaiba Phase 1&2 (Brasil)
Contractor: UTE PARNAIBA GERAÇAO DE ENERGIA, S.A.
Client: DURO FELGUERA S.A.
Commissioning of CC MONTOIR (FRANCIA)
Contractor: Técnicas Reunidas
Client: SPEM
Commissioning of CC LARES (PORTUGAL)
Contractor: COBRA
Client: EDP
Commissioning of CT Pego (Portugal)
Contractor: Siemens
Client: Siemens
Commissioning of CCGT Moerdijk (Netherlands)
Contractor: Técnica Reunidas S.A.
Client: Técnicas Reunidas S.A.
Commissioning of CTCC de Mittelsburen
(Alemania)
Client: GE WIND ENERGY GMBH
Commissioning of CTCC RESERVA FRÍA ETEN
Client: UTE Reserva Fría ETEN
Commissioning of C.T.C.C Wloclawek(Polonia)
Contractor: General Electric y SNC Lavalin
Client: General Electric
Commissioning of CTCC Chilca Plus (Perú)
Client: UTE NEW CHILCA
Commissioning of CCPP Dead Sea Works
(Sodom- Israel)
Client: Abener – Ghenova Ingeniera UTE Dead
Sea
Combined cycles
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
BIODIESEL
Our activities in the implementation of Biodiesel plants are:
- We make commissioning tasks.
- Plant checks and monitoring.
- Operational tasks.
- Equipment monitoring (pumps, flowmeters, etc)
- Waste managment.
WORKS MADE
Biodiesel Plant of Ferrol (A Coruña)
Contractor: Isolux Corsán
Client: Infinita
Biodiesel Plant of Castellón
Contractor: Isolux Corsán
Client: Infinita
Biodiesel Plant of Cuenca
Contractor: Técnicas Reunidas.
Client: Biocombustibles de Cuenca, S.A.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
BIOMASS
Our activities in the implementation of Biodiesel plants are:
- We make commissioning tasks.
- Plant checks and monitoring.
- Operational tasks.
- Equipment monitoring (pumps, flowmeters, etc)
- Waste managment.
WORKS MADE
Biomass Huelva
Contractor: Ecolaire España, S.A.
Client: OHL Insdustrial
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
DIESEL ENGINES
We offer complete solutions and we have enough resources to develop the following tasks:
- Preparation of lines for chemical cleaning
- Flushing lines (cooling waters, oil, gas oil, fuel oil, etc.)
- Pump motor alignment in all equipment
- Equipment start-up and monitoring
- Diesel engine start-up
- Operation of diesel engine until delivery to client
- Oil and fuel oil treatment plants commissioning
Besides, we wish to emphasize the quality of our training coursers for the staff of diesel plants, that
includes the study of the line monitoring, equipment handling and operation.
WORKS MADE
Commissioning of diesel engine Group IX & X
C.D. Ceuta.
Contractor: Ute Técnicas Reunidas- Duro Felguera.
Client: Endesa Generación.
Commissioning of diesel engine Group VII, VIII
& IX C.D. Las Salinas (Fuerteventura).
Contractor: Caldererías Indálicas S.L.
Client: Unelco- Endesa.
Commissioning of diesel engine Group VII, VIII,
IX, X & XI C.D. Punta Grande (Lanzarote).
Contractor: Ute Técnicas Reunidas-Duro Felguera.
Client: Unelco-Endesa
Commissioning of diesel engine Group XIX & XX
C.D. Ibiza (Baleares)
Contractor: MASA
Client: GESA-ENDESA.
Commisioning of diesel engine Group X, XI, XII
& XIII C.D. de Melilla.
Contractor: Técnicas Reunidas S.A.
Client: Endesa Generación.
Commissioning of motor diesel
C.D. Los Llanos (El Hierro)
Contractor: Endesa Generación
Client: Endesa Generación
Commissioning of diesel engine Group XIII, XIV
y XV C.D. Los Guinchos (La Palma).
Contractor: Maessa.
Client: Unelco-Endesa.
Diesel engines
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
DESULPHURISATIONS
We give solutions for this area with this services:
- Identification of lines.
- All kinds of filters testing.
- Preparation of lime.
- Filling of absorbers.
- Checking of different groups of pump motor alignments.
- Checking of gate valves in by-pass and entrance of gas absorber.
WORKS MADE
C.T.L.A. Carboneras (Almería) Group II.
Contractor: Endesa U.P.O.M.
Client: Endesa Generación.
C.T. Compostilla (León)
Contractor: Duro Felguera
Client: Endesa
C.T. Andorra (Teruel)
Contractor: Endesa U.P.O.M.
Client: Endesa Generación.
C.T. Velilla (Palencia)
Contractor: Duro Felguera
Client: Iberdrola
C.T. Sines (Portugal)
Contractor: Cobra.
Client: EDP
Desulphurisations
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
REGASIFICATION PLANTS
Our activities in the commissioning of regasification plants are:
- We make assembly of compressors (oil flushing, pipe cleaning, nitrogen sweep, bearings assembly,
pistons, engine coupling and alignment).
- Pump assembly and alignment.
- 24” and 36” butterfly valve assembly
- Valve assembly and repair retention.
- Ball, butterfly, control and safety.
- We make packing, gasket replacement, inspection of seals and gaskets retention, ball, butterfly,
control and safety.
- Blind flanges and inspection gates assembly (recondenser, gas oil tank).
- Assembly of gaskets and Teflon rings on loading arms, alignment of vaporiser flange assembly
with R.T.J.
- Assembly of fibre piping and inspection of CHCK valves.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
- Maintenance of oils and grease in turn-buckles of mooring cables and ramps.
- Manufacture of gaskets for various equipment.
- Execution of various instrumentation works.
- Mechanical support for unloading of LNG ship.
- General mechanical support in whole plant.
WORKS MADE
Regasification Plant Puerto de Sagunto
(Valencia)
Contractor: Regasagunto UTE.
Client: Saggas
REGANOSA (A Coruña)
Contractor: TGE.
Client: REGANOSA
Regasification plants
- Dismantling of actuators and turn valves in working position.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
SOLAR THERMAL POWER PLANTS
Specific services of:
- Preparation blown with air in the solar field and power island in HTF.
- Preparing for chemical cleaning.
- Oil filling in HTF.
- Systems reinstatement.
- Inspection and repair of motorised control valves, pumps, etc.
- Pre-commissioning checks and pump alignment.
- Exhaustive monitoring of systems according to P&Ds.
- Preparation for flushing (demineralised water, cooling water, gas)
- Sistems line up for both testing and for starting machines in the commissioning.
WORKS MADE
CT of CTS Andasol 1 y 2
Contractor: UTE Cobra-Sener
Client: EYRA
Commissioning of CTS Puerto Errado 2 (Murcia)
Contractor: UTE Errado Solar 2
Client: TSK – OHL Industrial
CT of CTS Extresol 1
Contractor: UTE Cobra-Sener
Client: EYRA
Commissioning of CTS Olivenza (Badajoz)
Contractor: ACCIONA Ingeniería
Client: UTE Termosolar Olivenza
CT of CTS La Risca (Badajoz)
Contractor: Seridom
Client: ACCIONA.
CTS Orellana la Vieja (Badajoz)
Contractor: Acciona
Client: Acciona
CT of CTS La Florida (Badajoz)
Contractor: UTE Samcasol 1
Client: TSK/ MAESSA
CTS La Africana (Posadas- Córdoba)
Contractor: TSK
Client: UTE Africasolar
Commissioning of CTS La Dehesa (Badajoz)
Contractor: UTE Samcasol 2
Client: TSK/MAESSA
Commissioning of CTS Villena (Alicante)
Contractor: FCC - SERIDOM
Client: UTE Termosolar Villena
Commissioning of CTS Majadas (Cáceres)
Contractor: Seridom
Client: Acciona Energía
CTS Arenales (Morón de la Frontera)
Contractor: Ecolaire España, S.L.
Client: Ecolaire España, S.L.
Commissioning of CTS Andasol 3 (Granada)
Contractor: UTE Andasol 3
Client: Ferrostaal AG - Duro Felguera S.A.
Commissioning of CTS KAXU (SUDÁFRICA)
Client: Abeinsa
Commissioning of CTS Sol Guzmán
(Palma del Rio -Córdoba)
Contractor: Seridom
Client: Seridom
CTS Morón de la Frontera (Sevilla)
Contractor: Acciona
Client: UTE Termosolar Morón
Commissioning of CTS Astexol 2 (Badajoz)
Contractor: ELECNOR, S.A.
Client: ELECNOR, S.A.
Commissioning of CTS KHI (SUDÁFRICA)
Client: Abeinsa
Commissioning of CTS BOOKPORT (SUDÁFRICA)
Client: ETC CONSORITUM
Commissioning of CTS Termosol 1 y 2 (Badajoz)
Cliente: Nextera Energy
Solar thermal power plants
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
HYDRAULIC
Mmypem specific services performed for water based on:
- Turbine and alternators assembly.
- Paddle adjustment.
- Pipe fitting.
- Star up of industrial centrals.
WORKS MADE
CH Frieira
Client: Alstom Hydro España, s.l.
MAINTENANCE
AND OVERHAULS
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
TURBINES
We have a highly experienced team prepared to do the entire reviews required to complete the
repair work and maintenance of engines and industrial facilities, offering practical and effective
solutions.
We offer a wide and specialized service of overhauls and maintenance. We carry out overhaul of
steam and gas turbines:
- Dismantling of casing.
- Inspection of bearings.
- Inspection of clutches.
- Inspection of alternators.
- Inspection of valves.
- Inspection of auxiliary equipment between others.
WORKS MADE
C.T. Andorra (Teruel).
Contractor: Mompresa.
Client: Endesa.
C.T. Sabón Gr. II
Contractor: Mompresa.
Client: Gas Natural - Unión Fenosa.
C.T. Tirme Incineradora San Reus (Mallorca)
Contractor: Mompresa.
Client: Tirme.
C.T. Aboño
Contractor: Mompresa.
Client: Hierros del Cantábrico
C.T. Sabón
Contractor: Mompresa.
Client: Gas Natural - Unión Fenosa.
C.T.C.C. Campo Gibraltar Gr. X y XI
Contractor: Siemens S.A.
Client: N.G.S.
C.T. Narcea ( Asturias)
Contractor: Mompresa.
Client: Gas Natural - Unión Fenosa
C.T.C.C. Palos de la Frontera Gr. X, XX, y XXX.
Contractor: Siemens S.A.
Client: Gas Natural - Unión Fenosa.
Turbines
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
DIESEL ENGINES
We have a highly experienced team to conduct the reviews required to complete the repair and
maintenance of machinery and industrial facilities, offering practical and effective solutions.
Nuestras actividades principales son:
- Disassembling of cylinder heads, pistons, etc.
- Inspection of auxiliary equipments
- Inspection of alternators.
- Inspection of pistons.
- Inspection of cylinder heads.
- Inspection of valves.
- Inspection of pumps and injectors.
WORKS MADE
Diesel Engine Transmediterránea (Almería)
Contractor: Caldererías Indálicas.
Client: Transmediterránea
Diesel Engine Gr. IX en C. D Ceuta 12000 Horas
Contractor: Endesa S.A.
Client: Endesa S.A.
Diesel Engine Navia de Suarna (Asturias)
Contractor: Man
Client: Reni Picot
Diesel Engine Gr. IX en C. D Ceuta 24000 Horas
Contractor: Endesa S.A.
Client: Endesa S.A.
Diesel Engine Gr. IX en C.D. Ceuta 5000 Horas
Contractor: Endesa S.A.
Client: Endesa S.A.
Diesel engines
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
MAINTENANCE
In Mmypem have a large and experienced team specialized in the maintenance of large industrial
plants.
The guarantee of our work provide the size of the customers and the continued commitment to them
by our company.
Our activities are summarized as follows:
- Integral maintenance programs
- Maintenance preventive.
- Maintenance reactive.
- Maintenance predictive.
- Maintenance warranty maintenance.
WORKS MADE
CTCC Arrúbal (Logroño)
Warranty Maintenance
Contractor: Siemens
Client: Gas Natural
CTCC Palos de la Frontera (Huelva)
Warranty Maintenance
Contractor: Siemens
Client: Gas Natural - Unión Fenosa
Regasificadora de Sagunto (Valencia)
Integral Maintenance
Contractor: Saggas
Client: Saggas
CTCC Sagunto (Valencia)
Warranty Maintenance
Contractor: Siemens
Client: Gas Natural - Unión Fenosa
CTCC As Pontes (A Coruña)
Integral Maintenance
Contractor: UTE Mantenimiento Integral CTCC
As Pontes de García Rodríguez
Client: Endesa Generación
CTS La Florida (Badajoz)
Contractor: Renovables Samca, S.A.
Client: Renovables Samca, S.A
CTS La Dehesa (Badajoz)
Contractor: Renovables Samca, S.A.
Client: Renovables Samca, S.A
CTCC Puerto de Barcelona (Barcelona)
Contractor: General Electric International Inc.
Client: General Electric International Inc.
CTS La Africana (Córdoba)
Contractor: Ormats Mantenimiento Integral, S.L.
Client: Ormats Mantenimiento Integral, S.L.
Maintenance
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
INDUSTRIAL
ASSEMBLIES
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
INDUSTRIAL ASSEMBLIES
We are specialized in assembly and facilities of pipe fitting in the industrial sector, developing
national works. In order make everything in ideal conditions we have an approved and perfectly
qualified equipment.
We put to your disposition a wide range of specific services to cover his principal needs in assembly
of pipelines:
- Blow down spool installation.
- Systems preparation for air blow down including changeovers.
- Manufacture of minor pipes (drains and vents).
- Fitting of platforms and rails.
- Pipe repairs.
- Plant final works and adjustments.
WORKS MADE
C.T.S. Arenales (Morón de la Frontera – Sevilla)
Contractor: Ecolaire España, S.L.
Client: Ecolaire España, S.L.
C.T.C.C. Port de Barcelona (Barcelona)
Contractor: Técnicas Reunidas
Client: Gas Natural
C.T.C.C. Castelnou (Teruel).
Contractor: Initec Energía
Client: Electrabel
Industrial assemblies
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
SALTS
FUSION
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
SALTS FUSION
We have consolidated ourselves in this service after have being collaborating in national projects, in
consequence we could offer with total guarantee activities like this:
- Training of staff.
- Logistics of moving and handling of "big-bags" of salts from storage tents located in the area of
temporary facilities to plant crushing/sift/grinding.
- Operation and Maintenance daily of removable plant of trituration/sift/grinding.
- Operation and Maintenance daily plant fusion removable.
- Receiving and Discharge "big bags" of trucks.
- Cleaning of trituration/sift/grinding and melting until it was operating for transport.
- Management and removal of waste.
WORKS MADE
Salts fusion in CTS Arenales
(Morón de la Frontera)
Contractor: Ecolaire España, S.L.
Client: Ecolaire España, S.L.
Salts fusion in Extresol 1
Contractor: UTE Cobra-Sener
Client: EYRA
Salts fusion in Andasol 1 y 2
Contractor: UTE Cobra-Sener
Client: EYRA
Salts fusión in Ouarzazate Solar(Marruecos)
Contractor: UTE OUARZAZATE SOLAR
Client: UTE OUARZAZATE SOLAR
Salts fusion
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
SUPERVISION AND
OPERATION
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
SUPERVISION AND OPERATION
Mmypem performs specific mechanical monitoring activities such as::
- Mechanical oversight activities in pre-commissioning tasks in tube and rotative engines: pumps,
compressors, steam turbines, ventilators, heat exchanges.
- Mechanical supervision of pre-commissioning works in piping.
- Mechanical supervision of pre-commissioning works rotary equipment.
WORKS MADE
Normandy Refinery (Francia)
Contractor: Técnicas Reunidas
Client: Técnicas Reunidas
CCPP Sugres (Rusia)
Contractor: Iberdrola
Client: Iberdrola
CCGT Lithuania
Contractor: Iberdrola
Client: Iberdrola
Refinería Elefsis (Grecia)
Contractor: Técnicas Reunidas
Client: Técnicas Reunidas
Planta Petroquímica de Kayan (Arabia Saudí)
Contractor: Técnicas Reunidas.
Client: Saudi ARAMCO
Petrochemical Plant of Rabigh (Arabia Saudí)
Contractor: Técnicas Reunidas.
Client: Saudi ARAMCO
CC Manifah(Arabia Saudí)
Contractor: Técnicas Reunidas.
Client: Técnicas Reunidas
Operation in Salts fusión in Ouarzazate
Solar(Marruecos)
Contractor: UTE OUARZAZATE SOLAR
Client: UTE OUARZAZATE SOLAR
Supervision and Operation
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
CLIENTS
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
CLIENTS
ALSTOM POWER
OPEMASA
BABCOCK MONTAJES S.A.
REGASAGUNTO UTE.
COBRA INDUSTRIAL PLANTS
S.P.A.
ENDESA S.A.
SERIDOM, S.A.
ENDESA GENERACIÓN S.A.
SIEMENS S.A.
FELGUERA MONTAJES Y MANTENIMIENTO S.A.
TÉCNICAS REUNIDAS S.A.
GESA
TSK-MAESSA
IBERINCO
UTES (ACECA.- SANTURZI – BOROA – ETC)
INITEC ENEGÍA S.A.
ACCIONA ENERGY
MAN B & W DIESEL AG
GENERAL ELECTRIC
MIPROM ENERGÍA S.L.
OHL INDUSTRIAL SL
MITSUBISHI ESPAÑA S.A.
RENOVABLES SAMCA, S.A.
MOMPRESA.
ECOLAIRE ESPAÑA, S.L.
MONCOBRA S.A.
ORMATS, S.L.
QUALITY
CERTIFICATE
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Nº RePro: 305949
MONTAJES MECÁNICOS Y PUESTAS EN
MARCHA J.R., S.L.
Una vez superado el proceso de registro, se extrae la siguiente información puntual de la documentación depositada:
Constitución
Año:
1999
Situación con la Seguridad Social
Al corriente:
SÍ
Último Certificado disponible:
23/10/2015
SÍ
Vencimiento del último Certificado:
21/10/2016
Vencimiento de la Póliza:
30/10/2015
Fecha de Vencimiento:
29/12/2015
Situación con la AEAT
Al corriente:
Seguro de Responsabilidad Civil
Nombre de la Cía. Aseguradora:
AXA
Límite Anual:
3.000.000
Datos Financieros
Últimos datos financieros disponibles:
2014
Observaciones:
Sistema de Gestión de Calidad
¿Certificado por un tercero?
SÍ
Norma de Referencia:
ISO 9001 : 2008
Certificador:
BUREAU VERITAS CERTIFICACION
Fecha de Certificación:
29/12/2009
Sistema de Gestión Medioambiental
Situación:
NINGUNA ACTIVIDAD DE CERTIFICACIÓN
Sistema de Gestión de Prevención de Riesgos Laborales
¿Dispone de un SGPRL documentado?
NO
¿Sistema Certificado por un tercero?
NO
Alcance del Certificado
RePro España, Portugal e Italia
Estado General de la Documentación:
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Nº RePro: 305949
MONTAJES MECÁNICOS Y PUESTAS EN
MARCHA J.R., S.L.
3.01.22 Montaje mecánico
3.99.34 Puesta en marcha de instalaciones
Nº RePro: 305949
MONTAJES MECÁNICOS Y PUESTAS EN
MARCHA J.R., S.L.
Eva Lezcano
Pablo García Berenguer
Director de Operaciones
Achilles South Europe, S.L.U.
Presidente del Comité
En representación de las Empresas Participantes.
Certificado válido hasta el día: 26/11/2016
Este certificado indica que el Proveedor en cuestión está registrado en RePro en los productos y/o servicios señalados para las empresas participantes en el
Registro de Proveedores. RePro podrá ser utilizado por las Empresas Participantes, bien como base para realizar la selección de proveedores que serán
invitados a presentar ofertas, o bien como requisito previo para poder acceder a sus propios sistemas de clasificación
Mecánicos y
MMYPEM Montajes
Puestas en Marcha J.R.
Pol. Ind. Os Airios, Sector 2, Parc. 15B
15320 · As Pontes · A Coruña
Tel. +34 981 450 861 · Fax. +34 981 450 489
[email protected]
www.mmypem.com