1. No category

Nuevo Peróxido de Hidrógeno
Eficacia de desinfección1
Agentes de humectación añadidos
Limpia y elimina proteinas2
1.
2.
Results of in vitro study following FDA/ISO stand-alone procedure for disinfecting products. Test solutions were modified with organic
soil to create a more rigorous test condition. Primary criteria for effective disinfection are defined as a reduction in the number of
bacteria by a minimum of 3 logs (99.9%) and a reduction of mold and yeast by a minimum of 1 log (90%) within the recommended
disinfection time. Graphs depict mean log reduction measured after manufacturers' recommended disinfecing time (soak only).
Results of an in vitro study measuring deposits on ACUVUE OASYS lenses. Lenses were subjected to 14 cycles of deposiDon with a
lipid and protein solution mimicking the human tear film followed by a cleaning regimen with either EasySept HYDRO+® or Clear Care
3% hydrogen peroxide systems. Each deposiDon/cleaning cycle was representative of one day of patient use. Cycled lenses (n=3)
were analyzed for deposits using image analysis. After 14 cycles, lenses cleaned with EasySept HYDRO+® had only 8.0% surface
coverage compared to 33.0% for lenses cleaned with Clear Care
TM
Tecnología Triple-Moist :
Mantiene las lentes hidratadas más tiempo 1
Fórmula exclusiva con 3 agentes humectantes
ATRAE LA
HIDRATACIÓN
ENVUELVE Y
PROTEGE
hacia la superficie de la
lente
la lente
HIDRATA HASTA
20 HORAS1
1. High resolution/accurate massHR/AM) mass spectrometry was used to detect and quantitate the relative amounts of surfactant retained on
lenses from EasySept HYDRO+® and Clear Care solutions after 20 hours of wear. PureVision2, ACUVUE OASYS, and AIR OPTIX AQUA lenses
were soaked in solutions for 12 hours prior to patients wearing lenses for 20 hours.
Indicaciones de EasySept HYDRO+®1
Lentes blandas
Eficacia de desinfección2
Lentes gas permeables
Eficacia de desinfección2
Tecnología Triple-MoistTM:
Agentes de humectación añadidos
1.
2.
Según instrucciones de producto EasySept HYDRO+®
1. Results of in vitro study following FDA/ISO stand-alone procedure for disinfecting products. Test solutions were modified with organic soil to
create a more rigorous test condition. Primary criteria for effective disinfection are defined as a reduction in the number of bacteria by a
minimum of 3 logs (99.9%) and a reduction of mold and yeast by a minimum of 1 log (90%) within the recommended disinfection time. Graphs
depict mean log reduction measured after manufacturers' recommended disinfecing time (soak only).
EasySept Hydro+®
La seguridad y la comodidad en peróxido de hidrógeno
Sin conservantes
La ausencia de conservantes hace que sea adecuado para pacientes con
sensibilidad a ciertos componentes
Hidratación más duradera1
Solo EasySept HYDRO+® incluye la tecnología Triple-Moist, que atrae, envuelve y
retiene hidratación en la superficie de las lentes de contacto hasta 20 horas1
Limpieza más duradera2
EasySept HYDRO+® mantiene las lentes limpias durante más tiempo
Listo en tan solo 4 horas3
EasySept HYDRO+® proporciona la desinfección excepcional en tan solo 4 horas
1.
2.
3.
Results of an in vitro study measuring deposits on ACUVUE OASYS lenses. Lenses were subjected to 14 cycles of deposiDon with a lipid and protein solution
mimicking the human tear film followed by a cleaning regimen with either EasySept HYDRO+® or Clear Care 3% hydrogen peroxide systems. Each
deposiDon/cleaning cycle was representative of one day of patient use. Cycled lenses (n=3) were analyzed for deposits using image analysis. After 14 cycles,
lenses cleaned with EasySept HYDRO+® had only 8.0% surface coverage compared to 33.0% for lenses cleaned with Clear Care
Results of an in vitro study measuring deposits on ACUVUE OASYS lenses. Lenses were subjected to 14 cycles of deposiDon with a lipid and protein solution
mimicking the human tear film followed by a cleaning regimen with either EasySept HYDRO+® or Clear Care 3% hydrogen peroxide systems. Each
deposiDon/cleaning cycle was representative of one day of patient use. Cycled lenses (n=3) were analyzed for deposits using image analysis. After 14 cycles,
lenses cleaned with EasySept HYDRO+® had only 8.0% surface coverage compared to 33.0% for lenses cleaned with Clear Care
.Results of in vitro study following FDA/ISO stand-alone procedure for disinfecting products. Test solutions were modified with organic soil to create a more
rigorous test condition. Primary criteria for effective disinfection are defined as a reduction in the number of bacteria by a minimum of 3 logs (99.9%) and a
reduction of mold and yeast by a minimum of 1 log (90%) within the recommended disinfection time. Graphs depict mean log reduction measured after
manufacturers' recommended disinfecing time (soak only).
Las últimas innovaciones en
soluciones de mantenimiento